mibs/nokia/ALCATEL-IND1-UDP-RELAY-MIB
ALCATEL-IND1-UDP-RELAY-MIB DEFINITIONS ::= BEGIN
IMPORTS
RowStatus FROM SNMPv2-TC
IpAddress,
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
Unsigned32,
Counter32 FROM SNMPv2-SMI
DisplayString,
MacAddress,
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
routingIND1UdpRelay, alaDhcpClientTraps FROM ALCATEL-IND1-BASE
InterfaceIndex FROM IF-MIB;
alcatelIND1UDPRelayMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel -Architects Of An Internet World "
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
UDP Relay to forward BOOTP/DHCP requests across VLANs
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= {routingIND1UdpRelay 1}
alcatelIND1UDPRelayMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Managed Objects."
::= { alcatelIND1UDPRelayMIB 1 }
alcatelIND1UDPRelayMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Conformance Information."
::= { alcatelIND1UDPRelayMIB 2 }
alcatelIND1UDPRelayMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Units Of Conformance."
::= { alcatelIND1UDPRelayMIBConformance 1 }
alcatelIND1UDPRelayMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Compliance Statements."
::= { alcatelIND1UDPRelayMIBConformance 2 }
iphelperMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 1 }
IphelperServIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IphelperServIndex provides a means to specify a service to be forwarded
by UDP Relay.
Some values indicate a specfic protocol and associated UDP port(s):
---------------- ---------- -----------
Value Protocol UDP port(s)
---------------- ---------- -----------
iphelperBootp BOOTP/DHCP 67/68
iphelperNbnsNbdd NBNS/NBDD 137/138
iphelperNbdd NBDD 138
iphelperDns DNS 53
iphelperTacacs TACACS 65
iphelperTftp TFTP 69
iphelperNtp NTP 123
The remaining values are to be used for other services:
---------------- ---------- -----------
Value Protocol UDP port
---------------- ---------- -----------
iphelperOther1 ? user-specified
iphelperOther2 ? user-specified
iphelperOther3 ? user-specified
iphelperOther4 ? user-specified
iphelperOther5 ? user-specified
iphelperOther6 ? user-specified
iphelperOther7 ? user-specified
iphelperOther8 ? user-specified
iphelperOther9 ? user-specified
iphelperOther10 ? user-specified
"
SYNTAX INTEGER {
iphelperBootp(1),
iphelperNbnsNbdd(2),
iphelperNbdd(3),
iphelperDns(4),
iphelperTacacs(5),
iphelperTftp(6),
iphelperNtp(7),
iphelperOther1(8),
iphelperOther2(9),
iphelperOther3(10),
iphelperOther4(11),
iphelperOther5(12),
iphelperOther6(13),
iphelperOther7(14),
iphelperOther8(15),
iphelperOther9(16),
iphelperOther10(17),
iphelperOther11(18),
iphelperOther12(19),
iphelperOther13(20),
iphelperOther14(21),
iphelperOther15(22),
iphelperOther16(23),
iphelperOther17(24),
iphelperOther18(25),
iphelperOther19(26),
iphelperOther20(27),
iphelperOther21(28),
iphelperOther22(29),
iphelperOther23(30),
iphelperOther24(31),
iphelperOther25(32)
}
IphelpereOption82ASCIIFieldType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ip helper Option 82 Format ASCII field type"
SYNTAX INTEGER {
none(0),
macAddress(1),
systemName(2),
userString(3),
interfaceAlias(4),
vlan(5),
interface(6)
}
iphelperTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of active UDP Relay Service instances."
::= { iphelperMIB 1 }
iphelperEntry OBJECT-TYPE
SYNTAX IphelperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in UDP Relay table"
INDEX { iphelperService, iphelperForwAddr ,iphelperVlan }
::= { iphelperTable 1 }
IphelperEntry ::= SEQUENCE {
iphelperService
IphelperServIndex,
iphelperForwAddr
IpAddress,
iphelperVlan
Unsigned32,
iphelperStatus
RowStatus
}
iphelperService OBJECT-TYPE
SYNTAX IphelperServIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies a service to be forwarded by UDP Relay."
::= { iphelperEntry 1 }
iphelperForwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies relayed service's forwarding address.
For entries with iphelperService equal to iphelperBootp(1):
This object can either be set to a distinct IP address (e.g. the address
of a server), to an IP broadcast address or a VLAN. A value
of 0.0.0.0 indicates that no forwarding address is being used.
For entries with iphelperService not equal to ipHelperBootp(1),
this object is not settable."
::= { iphelperEntry 2 }
iphelperVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies a Vlan to which the service is to be forwarded.
For entries with iphelperService equal to iphelperBootp(1),
a value of 0 indicates that no vlan is being used.
For entries with iphelperService not equal to ipHelperBootp(1),
only non-zero values may be specified."
::= { iphelperEntry 3 }
iphelperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { iphelperEntry 4 }
iphelperStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This keeps statistics for each service by server address."
::= { iphelperMIB 2 }
iphelperStatEntry OBJECT-TYPE
SYNTAX IphelperStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the stat table."
INDEX {iphelperServerAddress}
::= { iphelperStatTable 1 }
IphelperStatEntry ::= SEQUENCE {
iphelperServerAddress
IpAddress,
iphelperRxFromClient
Unsigned32,
iphelperTxToServer
Unsigned32,
iphelperMaxHopsViolation
Unsigned32,
iphelperForwDelayViolation
Unsigned32,
iphelperResetAll
INTEGER,
iphelperAgentInfoViolation
Counter32,
iphelperInvalidGatewayIP
Counter32,
iphelperInvalidAgentInfoOptFrmSrver
Counter32
}
iphelperServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the unique server address."
::= { iphelperStatEntry 1 }
iphelperRxFromClient OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This keeps track of the number of packets recieved from the client."
::= { iphelperStatEntry 2 }
iphelperTxToServer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This keeps track of the number of packets transmitted to the server."
::= { iphelperStatEntry 3}
iphelperMaxHopsViolation OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This keeps track of the number of packets dropped due to max hops violation.
Only meaningful for entries with ipHelperService equal to iphelperBootp(1)."
::= { iphelperStatEntry 4}
iphelperForwDelayViolation OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to forward delay violation.
Only meaningful for entries with ipHelperService equal to iphelperBootp(1)."
::= { iphelperStatEntry 5}
iphelperResetAll OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter resets all the stats."
::= { iphelperStatEntry 6}
iphelperAgentInfoViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to DHCP packet with giaddr
field not equal to zero and Relay Agent Information option is present and also the
Relay Agent Information Policy is set to DROP."
::= { iphelperStatEntry 7}
iphelperInvalidGatewayIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to giaddr matching a local
subnet and Relay Agent Information option is present in the DHCP packet."
::= { iphelperStatEntry 8}
iphelperInvalidAgentInfoOptFrmSrver OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to invalid from DHCP server
with Relay Agent Information option in the DHCP packet."
::= { iphelperStatEntry 9}
iphelperForwDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the BOOTP/DHCP relay's forwarding delay and
is only used by the BOOTP/DHCP service. For other services
it is ignored.It is typically set as seconds, but the value is totally
client dependent.This relay will not forward frames until client
frames have 'secs' field set to atleast the value
iphelperForwDelay."
::= { iphelperMIB 3 }
iphelperMaxHops OBJECT-TYPE
SYNTAX Unsigned32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the BOOTP/DHCP relay's maximum hops
forwarding limit and is only used by the BOOTP/DHCP service. For
other services it is ignored. If a frame arrives with hopcount greater than
or equal to iphelperMaxHops, it will be dropped."
::= {iphelperMIB 4}
iphelperForwardOption OBJECT-TYPE
SYNTAX INTEGER
{
standard(1),
avlanOnly(2),
perVlanOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is only significant for the BOOTP/DHCP service. It allows the relay
to forward DHCP requests only when they are issued by an Authenticated Vlan
client.Needed to prevent having multiple relays enabled on the same vlan.
Default value is standard"
::= {iphelperMIB 5}
iphelperBootupOption OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is only significant for the BOOTP/DHCP service. It allows the user to
enable or disable the functionality of the relay to get an IP address at the
time of system boot-up and assign that IP address as the router IP of the
default VLAN. Default option is Disable."
::= {iphelperMIB 6}
iphelperBootupPacketOption OBJECT-TYPE
SYNTAX INTEGER
{
bootp(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is only significant for the BOOTP/DHCP service. It allows the user to
select the packet format with the choices of BOOTP and DHCP to be used to get
an IP address at the time of system boot-up.
Default option is DHCP"
::= {iphelperMIB 7}
iphelperxServicePortAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperxServicePortAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of services being forwarded with their associated ports.
An entry in this table is allowed only for the services listed below:
iphelperBootp
iphelperNbnsNbdd
iphelperNbdd
iphelperDns
iphelperTacacs
iphelperTftp
iphelperNtp
"
::= { iphelperMIB 8 }
iphelperxServicePortAssociationEntry OBJECT-TYPE
SYNTAX IphelperxServicePortAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in UDP Relay PortAssociation table"
INDEX { iphelperxServicePortAssociationService }
::= { iphelperxServicePortAssociationTable 1 }
IphelperxServicePortAssociationEntry ::= SEQUENCE {
iphelperxServicePortAssociationService
IphelperServIndex,
iphelperxServicePortAssociationPort
Unsigned32,
iphelperxServicePortAssociationName
DisplayString,
iphelperxServicePortAssociationStatus
RowStatus
}
iphelperxServicePortAssociationService OBJECT-TYPE
SYNTAX IphelperServIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the service being forwarded.
Legal values:
iphelperBootp(1)
iphelperNbnsNbdd(2)
iphelperNbdd(3)
iphelperDns(4)
iphelperTacacs(5)
iphelperTftp(6)
iphelperNtp(7)
"
::= { iphelperxServicePortAssociationEntry 1 }
iphelperxServicePortAssociationPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UDP port for the service."
::= { iphelperxServicePortAssociationEntry 2 }
iphelperxServicePortAssociationName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name and/or description of the service."
::= { iphelperxServicePortAssociationEntry 3 }
iphelperxServicePortAssociationStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { iphelperxServicePortAssociationEntry 4 }
iphelperxPortServiceAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperxPortServiceAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of services being forwarded with their associated ports.
An entry in this table is allowed only for those services
NOT using one of the following well-known ports:
53 - DNS
65 - TACACS
67 - BOOTP/DHCP
68 - BOOTP/DHCP
69 - TFTP
123 - NTP
137 - NBNS
138 - NBDD
"
::= { iphelperMIB 9 }
iphelperxPortServiceAssociationEntry OBJECT-TYPE
SYNTAX IphelperxPortServiceAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in UDP Relay PortAssociation table"
INDEX { iphelperxPortServiceAssociationPort }
::= { iphelperxPortServiceAssociationTable 1 }
IphelperxPortServiceAssociationEntry ::= SEQUENCE {
iphelperxPortServiceAssociationService
IphelperServIndex,
iphelperxPortServiceAssociationPort
Unsigned32,
iphelperxPortServiceAssociationName
DisplayString,
iphelperxPortServiceAssociationStatus
RowStatus
}
iphelperxPortServiceAssociationService OBJECT-TYPE
SYNTAX IphelperServIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the service being forwarded."
::= { iphelperxPortServiceAssociationEntry 1 }
iphelperxPortServiceAssociationPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UDP port for the service.
May not be one of the following well-known ports:
53 - DNS
65 - TACACS
67 - BOOTP/DHCP
68 - BOOTP/DHCP
69 - TFTP
123 - NTP
137 - NBNS
138 - NBDD
"
::= { iphelperxPortServiceAssociationEntry 2 }
iphelperxPortServiceAssociationName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name and/or description of the service."
::= { iphelperxPortServiceAssociationEntry 3 }
iphelperxPortServiceAssociationStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { iphelperxPortServiceAssociationEntry 4 }
iphelperxPropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperPropertiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of services being forwarded with their associated ports.
There is an entry in this table for each service being forwarded
by UDP Relay, including those with implied protocol/port associations."
::= { iphelperMIB 10 }
iphelperxPropertiesEntry OBJECT-TYPE
SYNTAX IphelperPropertiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in UDP Relay Service Properties table"
INDEX { iphelperxPropertiesService }
::= { iphelperxPropertiesTable 1 }
IphelperPropertiesEntry ::= SEQUENCE {
iphelperxPropertiesService
IphelperServIndex,
iphelperxPropertiesPort
Unsigned32,
iphelperxPropertiesName
DisplayString
}
iphelperxPropertiesService OBJECT-TYPE
SYNTAX IphelperServIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the service to be forwarded."
::= { iphelperxPropertiesEntry 1 }
iphelperxPropertiesPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UDP port for the service."
::= { iphelperxPropertiesEntry 2 }
iphelperxPropertiesName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name/description of the service."
::= { iphelperxPropertiesEntry 3 }
iphelperxStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperxStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This keeps statistics for each service by server address."
::= { iphelperMIB 11 }
iphelperxStatEntry OBJECT-TYPE
SYNTAX IphelperxStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the stat table."
INDEX {iphelperxStatService, iphelperxStatServerAddress}
::= { iphelperxStatTable 1 }
IphelperxStatEntry ::= SEQUENCE {
iphelperxStatService
IphelperServIndex,
iphelperxStatServerAddress
IpAddress,
iphelperxStatVlan
Unsigned32,
iphelperxStatRxFromClient
Unsigned32,
iphelperxStatTxToServer
Unsigned32,
iphelperxStatReset
INTEGER
}
iphelperxStatService OBJECT-TYPE
SYNTAX IphelperServIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the service being forwarded."
::= { iphelperxStatEntry 1 }
iphelperxStatServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the unique server address."
::= { iphelperxStatEntry 2 }
iphelperxStatVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the unique Vlan of the server."
::= { iphelperxStatEntry 3 }
iphelperxStatRxFromClient OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets recieved from the client."
::= { iphelperxStatEntry 4 }
iphelperxStatTxToServer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This keeps track of the number of packets transmitted to the server."
::= { iphelperxStatEntry 5}
iphelperxStatReset OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter resets all the stats for this entry."
::= { iphelperxStatEntry 6}
iphelperAgentInformation OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is only significant for the BOOTP/DHCP service. It allows the user to
enable or disable the functionality of inserting the relay agent information
option to the DHCP option field according to RFC 3046."
::= {iphelperMIB 12}
iphelperAgentInformationPolicy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is only significant for the BOOTP/DHCP service. It allows the user to
select the policy of either drop, keep or replace the relay agent information
option if it is already present in the DHCP packet."
::= {iphelperMIB 13}
iphelperDhcpSnoopingVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperDhcpSnoopingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vlans that have DHCP Snooping enabled."
::= { iphelperMIB 14 }
iphelperDhcpSnoopingVlanEntry OBJECT-TYPE
SYNTAX IphelperDhcpSnoopingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snooping VLAN entry."
INDEX { iphelperDhcpSnoopingVlanNumber }
::= { iphelperDhcpSnoopingVlanTable 1 }
IphelperDhcpSnoopingVlanEntry ::= SEQUENCE {
iphelperDhcpSnoopingVlanNumber
INTEGER,
iphelperDhcpSnoopingVlanOpt82DataInsertionStatus
INTEGER,
iphelperDhcpSnoopingVlanMacAddrVerificationStatus
INTEGER,
iphelperDhcpSnoopingVlanTrafficSuppressionStatus
INTEGER,
iphelperDhcpSnoopingVlanStatus
RowStatus
}
iphelperDhcpSnoopingVlanNumber OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN number identifying this instance. Valid
range from 1 to 4094."
::= { iphelperDhcpSnoopingVlanEntry 1 }
iphelperDhcpSnoopingVlanOpt82DataInsertionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Option-82 data insertion status. Default value
is enabled, which means once the VLAN is enabled for DHCP
snooping, the Option-82 field will be inserted in the DHCP
packets between the Relay Agent and the DHCP Server, on all
the ports belong to the VLAN."
DEFVAL { enabled }
::= { iphelperDhcpSnoopingVlanEntry 2 }
iphelperDhcpSnoopingVlanMacAddrVerificationStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping MAC Address verification status. Default value
is enabled. Once enabled, for all the incoming DHCP traffic to
those DHCP Snooping enabled vlan port, it compares the source MAC
address and the client Hardware Address in the DHCP packet. If mismatch,
the packet will be dropped."
DEFVAL { enabled }
::= { iphelperDhcpSnoopingVlanEntry 3 }
iphelperDhcpSnoopingVlanTrafficSuppressionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping Traffic Suppression status. Default value
is disabled. Once enabled, for all the incoming DHCP traffic to
those DHCP Snooping enabled vlan port will not be flooded throughout
the VLAN. The usage of UDP/DHCP Relay Agent will be enforced. Traffic
will always be forwarded to CPU."
DEFVAL { disabled }
::= { iphelperDhcpSnoopingVlanEntry 4 }
iphelperDhcpSnoopingVlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { iphelperDhcpSnoopingVlanEntry 5 }
iphelperDhcpSnoopingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperDhcpSnoopingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ports that have DHCP Snooping trust status."
::= { iphelperMIB 15 }
iphelperDhcpSnoopingPortEntry OBJECT-TYPE
SYNTAX IphelperDhcpSnoopingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snooping Port entry."
INDEX { iphelperDhcpSnoopingPortIfIndex }
::= { iphelperDhcpSnoopingPortTable 1 }
IphelperDhcpSnoopingPortEntry ::= SEQUENCE {
iphelperDhcpSnoopingPortIfIndex
InterfaceIndex,
iphelperDhcpSnoopingPortTrustMode
INTEGER,
iphelperDhcpSnoopingPortTrafficSuppression
INTEGER,
iphelperDhcpSnoopingPortMacAddrViolation
Counter32,
iphelperDhcpSnoopingPortDhcpServerViolation
Counter32,
iphelperDhcpSnoopingPortRelayAgentViolation
Counter32,
iphelperDhcpSnoopingPortOption82Violation
Counter32,
iphelperDhcpSnoopingPortBindingViolation
Counter32,
iphelperDhcpSnoopingPortIpSourceFiltering
INTEGER
}
iphelperDhcpSnoopingPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex subindex identifying this instance."
::= { iphelperDhcpSnoopingPortEntry 1 }
iphelperDhcpSnoopingPortTrustMode OBJECT-TYPE
SYNTAX INTEGER {
blocked(1),
clientOnly(2),
trusted(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping's VLAN port's trust mode. Default value
is client-only, which means once the VLAN is enabled for DHCP
snooping, the vlan ports only allow DHCP client packets. Blocked
means all DHCP traffic is block on the port. Trusted means all
DHCP traffic is allowed on the port"
DEFVAL { clientOnly }
::= { iphelperDhcpSnoopingPortEntry 2 }
iphelperDhcpSnoopingPortTrafficSuppression OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping Traffic Suppression status. Default value
is disabled. Once enabled, for all the incoming DHCP traffic to
those ports will not be flooded instead will always be forwarded to CPU."
DEFVAL { disabled }
::= { iphelperDhcpSnoopingPortEntry 3 }
iphelperDhcpSnoopingPortMacAddrViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to DHCP
packet with the source MAC Address not equal the client DHCP
Hardware address in the DHCP packet."
::= { iphelperDhcpSnoopingPortEntry 4 }
iphelperDhcpSnoopingPortDhcpServerViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to receiving
an DHCP server packet on a DHCP Snooping enabled port."
::= { iphelperDhcpSnoopingPortEntry 5 }
iphelperDhcpSnoopingPortOption82Violation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to a relay
agent forards a packet that includes option 82 info to an untrusted port."
::= { iphelperDhcpSnoopingPortEntry 6 }
iphelperDhcpSnoopingPortRelayAgentViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to an DHCP
relay agent forwards a DHCP packate includes an relay agent ip address that
is not 0.0.0.0."
::= { iphelperDhcpSnoopingPortEntry 7 }
iphelperDhcpSnoopingPortBindingViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to receiving
an DHCP Relase or DHCP Decline message that contains a MAC address in the
DHCP snooping binding table, but the interface information in the binding
table does not match the interface on which the message was received."
::= { iphelperDhcpSnoopingPortEntry 8 }
iphelperDhcpSnoopingPortIpSourceFiltering OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping IP Source filtering status. Default value
is disabled. Once enabled, only the incoming traffic with the proper
client IP address, MAC address and port will be allowed."
DEFVAL { disabled }
::= { iphelperDhcpSnoopingPortEntry 9 }
iphelperDhcpSnoopingBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperDhcpSnoopingBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping binding table."
::= { iphelperMIB 16 }
iphelperDhcpSnoopingBindingEntry OBJECT-TYPE
SYNTAX IphelperDhcpSnoopingBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snooping binding entry."
INDEX { iphelperDhcpSnoopingBindingMacAddress, iphelperDhcpSnoopingBindingIfIndex }
::= { iphelperDhcpSnoopingBindingTable 1 }
IphelperDhcpSnoopingBindingEntry ::= SEQUENCE {
iphelperDhcpSnoopingBindingMacAddress
MacAddress,
iphelperDhcpSnoopingBindingIfIndex
InterfaceIndex,
iphelperDhcpSnoopingBindingIpAddress
IpAddress,
iphelperDhcpSnoopingBindingVlan
Unsigned32,
iphelperDhcpSnoopingBindingLeaseTime
Unsigned32,
iphelperDhcpSnoopingBindingType
INTEGER,
iphelperDhcpSnoopingBindingRowStatus
RowStatus
}
iphelperDhcpSnoopingBindingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC Address subindex identifying this instance."
::= { iphelperDhcpSnoopingBindingEntry 1 }
iphelperDhcpSnoopingBindingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IfIndex subindex identifying this instance. It is the
the interface where the DHCP request is coming in from."
::= { iphelperDhcpSnoopingBindingEntry 2 }
iphelperDhcpSnoopingBindingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ip Address offered by the DHCP Server to the Client."
::= { iphelperDhcpSnoopingBindingEntry 3 }
iphelperDhcpSnoopingBindingVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is the VLAN Id where the DHCP client belongs to."
::= { iphelperDhcpSnoopingBindingEntry 4 }
iphelperDhcpSnoopingBindingLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lease time of the client's IP Address."
::= { iphelperDhcpSnoopingBindingEntry 5 }
iphelperDhcpSnoopingBindingType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The learning/configuration nature of the binding entry.
Normally, the entries are learned dynamically, while it
also can be statically/manually configured."
DEFVAL { dynamic }
::= { iphelperDhcpSnoopingBindingEntry 6 }
iphelperDhcpSnoopingBindingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { iphelperDhcpSnoopingBindingEntry 7 }
iphelperDhcpSnooping OBJECT-TYPE
SYNTAX INTEGER
{
switchLevel(1),
disabled(2),
vlanLevel(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling DHCP Snooping at the switch level. For the vlan level,
it is enabled implicitly when an individual vlan's DHCP Snooping
is enbled."
::= {iphelperMIB 17}
iphelperDhcpSnoopingOpt82DataInsertionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Option-82 data insertion status at switch level.
Default value is enabled, the Option-82 field will be inserted in the DHCP
packets between the Relay Agent and the DHCP Server, on all
the ports belong to the switch."
DEFVAL { enabled }
::= { iphelperMIB 18 }
iphelperDhcpSnoopingMacAddrVerificationStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping MAC Address verification status at switch level.
Default value is enabled. Once enabled, for all the incoming DHCP traffic to
the port, it compares the source MAC address and the client Hardware
Address in the DHCP packet. If mismatch, the packet will be dropped."
DEFVAL { enabled }
::= { iphelperMIB 19 }
iphelperDhcpSnoopingTrafficSuppressionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping Traffic Suppression status at switch level. Default value
is disabled. Once enabled, for all the incoming DHCP traffic to
the ports will not be flooded The usage of UDP/DHCP Relay Agent will be
enforced. DHCP Traffic will always be forwarded to CPU."
DEFVAL { disabled }
::= { iphelperMIB 20 }
iphelperDhcpSnoopingBindingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the capability of building the DHCP Snooping
Binding Table/Database is enable or not. By default, it is enabled.
It is applicable for both switch-level or vlan-level DHCP Snooping."
DEFVAL { enabled }
::= { iphelperMIB 21 }
iphelperDhcpSnoopingBindingDatabaseSyncTimeout OBJECT-TYPE
SYNTAX Unsigned32 (180..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping Binding Database synchronization timeout value. It is
used to specify the synchronization frequency, in seconds, between the
binding table in memory and the binding file in flash."
DEFVAL { 300 }
::= { iphelperMIB 22 }
iphelperDhcpSnoopingBindingDatabaseLastSyncTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last successuful DHCP Snooping Binding
Database synchronization."
::= { iphelperMIB 23 }
iphelperDhcpSnoopingBindingDatabaseAction OBJECT-TYPE
SYNTAX INTEGER {
noaction(0),
purge(1),
renew(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the action to be performed. Purge:
means to clear the binding table entries in the memory.
Renew: means to populate the binding table entries from the
flash file."
::= { iphelperMIB 24 }
iphelperTrafficSuppressionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP packet traffic suppression status. By default, it is disabled.
Once enabled, all incoming DHCP packets will be sent to software only,
and no longer be hardware flooded."
DEFVAL { disabled }
::= { iphelperMIB 25 }
iphelperDhcpSnoopingBypassOpt82CheckStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP bypass option-82 check status. By default, it is disabled.
Once enabled, it will no longer enforce the check of option-82
field in the incoming DHCP Packets on those untrusted ports."
DEFVAL { disabled }
::= { iphelperMIB 26 }
iphelperDhcpOption82FormatType OBJECT-TYPE
SYNTAX INTEGER {
macAddress(1),
systemName(2),
userString(3),
interfaceAlias(4),
autoInterfaceAlias(5),
ascii(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option-82 defines the type of information carried in circuit id
and remote id sub option fields. If the type selected is string the actual
value of the string can be found in iphelperDhcpOption82StringValue.
Format type ASCII will insert the configured fields in ASCII format."
DEFVAL { macAddress }
::= { iphelperMIB 27 }
iphelperDhcpOption82StringValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the string that will be used in the circuit id and remote id
sub options."
::= { iphelperMIB 28 }
iphelperPXESupport OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled the relay agent will replace the source IP address of the packet
with the gateway IP address from the DHCP packet.
The default value is disabled."
DEFVAL { disabled }
::= { iphelperMIB 29 }
iphelperDhcpSnoopingBindingPersistencyStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Snooping binding table persistency check status. By default, it is disabled.
Once enabled, the binding entries expiry will be solely depend on Lease time"
DEFVAL { disabled }
::= { iphelperMIB 30 }
iphelperDhcpSnoopingOption82FormatASCIIField1 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the first field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 31 }
iphelperDhcpSnoopingOption82FormatASCIIField1StringValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the first field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
::= { iphelperMIB 32 }
iphelperDhcpSnoopingOption82FormatASCIIField2 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the second field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 33 }
iphelperDhcpSnoopingOption82FormatASCIIField2StringValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the second field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
::= { iphelperMIB 34 }
iphelperDhcpSnoopingOption82FormatASCIIField3 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the third field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 35 }
iphelperDhcpSnoopingOption82FormatASCIIField3StringValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the third field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
::= { iphelperMIB 36 }
iphelperDhcpSnoopingOption82FormatASCIIField4 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the fourth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 37 }
iphelperDhcpSnoopingOption82FormatASCIIField4StringValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the fourth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
::= { iphelperMIB 38 }
iphelperDhcpSnoopingOption82FormatASCIIField5 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the fifth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 39 }
iphelperDhcpSnoopingOption82FormatASCIIField5StringValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the fifth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
::= { iphelperMIB 40 }
iphelperDhcpSnoopingOption82FormatASCIIDelimiter OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the delimiter that is inserted between the fields in the
Option 82 string in ASCII format, which will be copied to Option-82
circuit id of the DHCP packet. This value is applicable only, if the
option 82 format type is ASCII"
::= { iphelperMIB 41 }
-- --------------------------------------------------------------
-- Trap Description
-- --------------------------------------------------------------
alaDhcpClientTrapsDesc OBJECT IDENTIFIER ::= { alaDhcpClientTraps 1 }
alaDhcpClientTrapsObj OBJECT IDENTIFIER ::= { alaDhcpClientTraps 2 }
-- Notifications
alaDhcpClientAddressAddTrap NOTIFICATION-TYPE
OBJECTS {
alaDhcpClientAddress
}
STATUS current
DESCRIPTION
"When new IP address is assigned to DHCP Client interface."
::= { alaDhcpClientTrapsDesc 0 1 }
alaDhcpClientAddressExpiryTrap NOTIFICATION-TYPE
OBJECTS {
alaDhcpClientAddress
}
STATUS current
DESCRIPTION
"When the lease time expires or when DHCP client not
able to renew/rebind an IP address."
::= { alaDhcpClientTrapsDesc 0 2 }
alaDhcpClientAddressModifyTrap NOTIFICATION-TYPE
OBJECTS {
alaDhcpClientAddress,
alaDhcpClientNewAddress
}
STATUS current
DESCRIPTION
"When the dhcp client not able to obtain the existing
IP address and new IP address is assigned to the DHCP client."
::= { alaDhcpClientTrapsDesc 0 3 }
-- Notification Objects
alaDhcpClientAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the current IP address of the DHCP client."
::= { alaDhcpClientTrapsObj 1 }
alaDhcpClientNewAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the new IP address assigned for the DHCP client."
::= { alaDhcpClientTrapsObj 2 }
--
-- COMPLIANCE
--
alcatelIND1UDPRelayMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for UDP Relay"
MODULE
MANDATORY-GROUPS
{
iphelperGroup,
iphelperStatGroup,
iphelperMiscGroup,
alaDhcpClientTrapsGroup
}
::={ alcatelIND1UDPRelayMIBCompliances 1}
iphelperGroup OBJECT-GROUP
OBJECTS
{
iphelperForwAddr,
iphelperStatus
}
STATUS current
DESCRIPTION
" Collection of objects for the management of parameters of UDP Relay."
::= { alcatelIND1UDPRelayMIBGroups 1}
iphelperStatGroup OBJECT-GROUP
OBJECTS
{
iphelperServerAddress,
iphelperRxFromClient,
iphelperTxToServer,
iphelperMaxHopsViolation,
iphelperForwDelayViolation,
iphelperResetAll,
iphelperAgentInfoViolation,
iphelperInvalidGatewayIP,
iphelperInvalidAgentInfoOptFrmSrver
}
STATUS current
DESCRIPTION
" Collection of objects for management of statistics for UDP Relay."
::= { alcatelIND1UDPRelayMIBGroups 2}
iphelperMiscGroup OBJECT-GROUP
OBJECTS
{
iphelperForwDelay,
iphelperMaxHops,
iphelperForwardOption,
iphelperBootupOption,
iphelperBootupPacketOption,
iphelperDhcpSnoopingOption82FormatASCIIField1,
iphelperDhcpSnoopingOption82FormatASCIIField1StringValue,
iphelperDhcpSnoopingOption82FormatASCIIField2,
iphelperDhcpSnoopingOption82FormatASCIIField2StringValue,
iphelperDhcpSnoopingOption82FormatASCIIField3,
iphelperDhcpSnoopingOption82FormatASCIIField3StringValue,
iphelperDhcpSnoopingOption82FormatASCIIField4,
iphelperDhcpSnoopingOption82FormatASCIIField4StringValue,
iphelperDhcpSnoopingOption82FormatASCIIField5,
iphelperDhcpSnoopingOption82FormatASCIIField5StringValue,
iphelperDhcpSnoopingOption82FormatASCIIDelimiter
}
STATUS current
DESCRIPTION
" Other independent objects of UDP Relay."
::= { alcatelIND1UDPRelayMIBGroups 3}
alaDhcpClientTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
alaDhcpClientAddressAddTrap,
alaDhcpClientAddressExpiryTrap,
alaDhcpClientAddressModifyTrap
}
STATUS current
DESCRIPTION
"Collection of traps for management of DHCP Client "
::= { alcatelIND1UDPRelayMIBGroups 4}
END