mibs/nokia/ALCATEL-IND1-VLAN-MGR-MIB
ALCATEL-IND1-VLAN-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, IpAddress, Unsigned32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
softentIND1VlanMgt FROM ALCATEL-IND1-BASE;
alcatelIND1VLANMgrMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Vlan Manager for the distribution of vlan configuration information,
including the association between vlans and ports.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { softentIND1VlanMgt 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
IpxNetworkAddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"Textual convention for ipx network address.
This is an unsigned integer (32 bits) that should be
represented as a hexedecimal value."
SYNTAX Unsigned32
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1VLANMgrMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Managed Objects."
::= { alcatelIND1VLANMgrMIB 1 }
alcatelIND1VLANMgrMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Conformance Information."
::= { alcatelIND1VLANMgrMIB 2 }
alcatelIND1VLANMgrMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Units Of Conformance."
::= { alcatelIND1VLANMgrMIBConformance 1 }
alcatelIND1VLANMgrMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Compliance Statements."
::= { alcatelIND1VLANMgrMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVlan OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Virtual LAN instances in this device."
::= { vlanMgrVlan 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN entry."
INDEX { vlanNumber }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE {
vlanNumber
INTEGER,
vlanDescription
DisplayString,
vlanAdmStatus
INTEGER,
vlanOperStatus
INTEGER,
vlanStatus
RowStatus,
vlanStpStatus
INTEGER,
vlanAuthentStatus
INTEGER,
vlanVoiceStatus
INTEGER,
vlanIpAddress
IpAddress,
vlanIpMask
IpAddress,
vlanIpEncap
INTEGER,
vlanIpForward
INTEGER,
vlanIpStatus
INTEGER,
vlanIpxNet
IpxNetworkAddress,
vlanIpxEncap
INTEGER,
vlanIpxRipSapMode
INTEGER,
vlanIpxDelayTicks
INTEGER,
vlanIpxStatus
INTEGER,
vlanTagMobilePortStatus
INTEGER,
vlanPortMacStatus
INTEGER,
vlanLocalProxyArp
INTEGER,
vlanMtu
INTEGER,
vlan1x1StpStatus
INTEGER,
vlanflatStpStatus
INTEGER,
vlanHABandwidth
INTEGER,
vlanSvlanTrafficType
INTEGER,
vlanSvlanPriority
INTEGER,
vlanMacLearningControlStatus
INTEGER
}
vlanNumber OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN number identifying this instance. Valid
range from 1 to 4094."
::= { vlanEntry 1 }
vlanDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Textual description of the VLAN instance."
::= { vlanEntry 2 }
vlanAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status which can be set by
configuration. Disable(1) will disable ALL vports
that are connected to this VLAN, enable(2) will enable
ALL ports on this VLAN, delete(3) will detach and
delete the ports/routers AND remove the VLAN."
DEFVAL { enabled }
::= { vlanEntry 3 }
vlanOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provide operating status of a particular VLAN environment."
::= { vlanEntry 4 }
vlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status to control creation/deletion of vlans."
::= { vlanEntry 5 }
vlanStpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates status of spanning tree for the current VLAN."
DEFVAL { enabled }
::= { vlanEntry 6 }
vlanAuthentStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates status of authentication for the current VLAN."
DEFVAL { disabled }
::= { vlanEntry 7 }
vlanVoiceStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates status of voice usage for the current VLAN."
DEFVAL { disabled }
::= { vlanEntry 8 }
vlanIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the VLAN's virtual router port.
Note: a vlan does not necessarily have an ip address.
Setting one requires that the ip address be set, and optionally the
following since they have defaults: ip mask, ip encap, ip forward.
Then setting vlanIpStatus to add will create the ip router port
for the given vlan (the index)."
::= { vlanEntry 9 }
vlanIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subnetwork mask for VLAN IP Address.
Default is class level mask for the ip address."
::= { vlanEntry 10 }
vlanIpEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet2 (1),
snap (2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN's IP router port encapsulation.
Not applicable when there is no ip router port."
DEFVAL { ethernet2 }
::= { vlanEntry 11 }
vlanIpForward OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN's IP router port ip frame forwarding (disabled = ip host only).
Not applicable when there is no ip router port."
DEFVAL { enable }
::= { vlanEntry 12 }
vlanIpStatus OBJECT-TYPE
SYNTAX INTEGER {
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides ability to add and remove the VLAN ip address."
::= { vlanEntry 13 }
vlanIpxNet OBJECT-TYPE
SYNTAX IpxNetworkAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPX network address.
Note: a vlan does not necessarily have an ipx net number.
Setting one requires that the ipx net be set, and optionally the
ipx encap, ipx rip-sap mode, and delay ticks (all have defaults).
Then the vlanIpxStatus should be set to add to create the
ipx router port."
::= { vlanEntry 14 }
vlanIpxEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet2 (1),
novellraw (2),
llc (3),
snap (4),
notApplicable(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPX of frame enapsulation of IPX VLAN router port.
Not applicable when there is no ipx router port."
DEFVAL { ethernet2 }
::= { vlanEntry 15 }
vlanIpxRipSapMode OBJECT-TYPE
SYNTAX INTEGER {
riponly (1),
ripsap (2),
triggered (3),
inactive(4),
notApplicable(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPX advertisement mode.
Not applicable when there is no ipx router port."
DEFVAL { ripsap }
::= { vlanEntry 16 }
vlanIpxDelayTicks OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tick metric to use for supporting IPX routing decisions."
DEFVAL { 0 }
::= {vlanEntry 17 }
vlanIpxStatus OBJECT-TYPE
SYNTAX INTEGER {
add(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides ability to add and remove the VLAN ipx network node."
::= { vlanEntry 18 }
vlanTagMobilePortStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled for a VLAN, a mobile port will be moved to the
VLAN based on the tag."
::= { vlanEntry 19 }
vlanPortMacStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When enabled for a VLAN, it will be considered a special VLAN not
affected by the ordinary vlan commands except the command to
delete a VLAN"
::= { vlanEntry 20 }
vlanLocalProxyArp OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled for a VLAN, local proxy ARP processing happens on this=
VLAN."
::= { vlanEntry 21 }
vlanMtu OBJECT-TYPE
SYNTAX INTEGER (1280..9198)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum transmission unit i.e. the maximum size of packet that this
vlan can handle. It ranges from 1280 to 9198."
::= { vlanEntry 22 }
vlan1x1StpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates status of 1x1 spanning tree for the current VLAN."
DEFVAL { enabled }
::= { vlanEntry 23}
vlanflatStpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates status of flat spanning tree for the current VLAN."
DEFVAL { enabled }
::= { vlanEntry 24}
vlanHABandwidth OBJECT-TYPE
SYNTAX INTEGER (0..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bandwidth of flood queue allocated by Q-driver for High Availability
vlans. The value ranges from 1 to 50 Mega bits per second."
::= { vlanEntry 25 }
vlanSvlanTrafficType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
customer(1),
provider(2),
multicastEnterprise(3),
multicastVlanStacking(4),
eServiceCustomer(6),
eServiceManagement(7),
eServiceMulticastVlanStacking(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The created SVLAN is desired for carrying customer or
provider traffic, default is customer. When creating
standard Vlans the value should be notApplicable"
DEFVAL { 0 }
::= { vlanEntry 26 }
vlanSvlanPriority OBJECT-TYPE
SYNTAX INTEGER (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"All traffic getting mapped to this Svlan should be either
priority mapped or mapped to a specific priority 0-7, default
is priority 0. For standard Vlans the value should be -1"
DEFVAL { 0 }
::= { vlanEntry 27 }
vlanMacLearningControlStatus OBJECT-TYPE
SYNTAX INTEGER{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of Mac Learning on a vlan"
DEFVAL { enabled }
::= { vlanEntry 28 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVpa OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vpaTable OBJECT-TYPE
SYNTAX SEQUENCE OF VpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Virtual LAN instances in this device."
::= { vlanMgrVpa 1 }
vpaEntry OBJECT-TYPE
SYNTAX VpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN-Port Association (VPA) entry."
INDEX { vpaVlanNumber, vpaIfIndex }
::= { vpaTable 1 }
VpaEntry ::= SEQUENCE {
vpaVlanNumber
INTEGER,
vpaIfIndex
Unsigned32,
vpaType
INTEGER,
vpaState
INTEGER,
vpaStatus
RowStatus,
vpaPortMacType
INTEGER
}
vpaVlanNumber OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN number component of this instance. Valid
range from 1 to 4094."
::= { vpaEntry 1 }
vpaIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1001..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ifIndex component of this instance."
::= {vpaEntry 2 }
vpaType OBJECT-TYPE
SYNTAX INTEGER {
cfgDefault(1),
qTagged(2),
mobile(3),
mirrored(4),
svlan(6),
dynamic(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this vpa. Two are statically configured:
configured default VPA and qTagged VPA. The mirrored
is an internal type set for mirrored ports and the
rest are dynamic vlan's
1. cfgDefault - Default vlan VPA Type
2. qTagged - The qTagged vlan VPA Type
3. mobile - The vpa is dynamically created according
to rules/policies.
4. mirrored - Set internally when the vpa created is on
a mirrored port.
6. slvan - Service vlan vpa's which are created.
7. dynamic - Created by dynamic GVRP or MVRP Protocol."
::= { vpaEntry 3 }
vpaState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
blocking(2),
forwarding(3),
filtering(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this vpa:
1. inactive - link down
2. blocking - link up, forwarding down
3. forwarding - link up, forwarding up, sources learned normally
4. filtering - link up, forwarding up, sources filtered."
::= { vpaEntry 4 }
vpaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to create or delete staticPrimary VPAs (default vlans
on a port ). Creation replaces the existing staticPrimary VPA
while deletion replaces the existing VPA so that the vlan number
is 1 for the given port. Of course the corresponding vlan and
port must exist."
::= { vpaEntry 5 }
vpaPortMacType OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
inapplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of this field will decide whether the port represented by vpaIfIndex is a ingress port or egress port. This fiels is applicable only for portMac vlans"
::= { vpaEntry 6 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVlanSet OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanSetVlanCount OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of existing VLANs on switch."
::= { vlanMgrVlanSet 1 }
vlanSetVlanRouterCount OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of VLANs on switch with at least one router port configured."
::= { vlanMgrVlanSet 2 }
vlanSetIpRouterCount OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of VLANs on switch with IP router port configured."
::= { vlanMgrVlanSet 3 }
vlanSetIpxRouterCount OBJECT-TYPE
SYNTAX INTEGER (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of VLANs on switch with IPX router port configured."
::= { vlanMgrVlanSet 4 }
vlanSetMultiRtrMacStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether unique mac assigned to each vlan
with router port (limit 64)."
DEFVAL { disable }
::= { vlanMgrVlanSet 5 }
--YP
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrHAPort OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanHAPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanHAPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Port To HA vlan binding."
::= { vlanMgrHAPort 1 }
vlanHAPortEntry OBJECT-TYPE
SYNTAX VlanHAPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port To HA vlan binding entry."
INDEX { vlanHAPortVlanId, vlanHAPortIfIndex, vlanHAPortType }
::= { vlanHAPortTable 1 }
VlanHAPortEntry ::= SEQUENCE {
vlanHAPortVlanId INTEGER,
vlanHAPortIfIndex Unsigned32,
vlanHAPortType INTEGER,
vlanHAPortRowStatus RowStatus
}
vlanHAPortVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan Id in which this port is a HA port"
::= { vlanHAPortEntry 1 }
vlanHAPortIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This port is associated with a HA vlan."
::= { vlanHAPortEntry 2 }
vlanHAPortType OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of this field will decide whether the port represented by vlanHAPortIfIndex is a ingress port or egress port."
::= { vlanHAPortEntry 3 }
vlanHAPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicate whether to add or delete the ifIndex"
::= { vlanHAPortEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1VLANMgrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for
VLAN Manager."
MODULE
MANDATORY-GROUPS
{
vlanMgrVlanGroup,
vlanMgrVpaGroup,
vlanMgrVlanSetGroup
}
::= { alcatelIND1VLANMgrMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVlanGroup OBJECT-GROUP
OBJECTS
{
vlanNumber, -- vlan table
vlanDescription,
vlanAdmStatus,
vlanOperStatus,
vlanStatus,
vlan1x1StpStatus,
vlanflatStpStatus,
vlanStpStatus,
vlanAuthentStatus,
vlanVoiceStatus,
vlanIpAddress,
vlanIpMask,
vlanIpEncap,
vlanIpForward,
vlanIpStatus,
vlanIpxNet,
vlanIpxEncap,
vlanIpxRipSapMode,
vlanIpxDelayTicks,
vlanIpxStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of Vlan Manager VLANs."
::= { alcatelIND1VLANMgrMIBGroups 1 }
vlanMgrVpaGroup OBJECT-GROUP
OBJECTS
{
vpaVlanNumber, -- vpa table
vpaIfIndex,
vpaType,
vpaState,
vpaStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of Vlan Manager VPAs."
::= { alcatelIND1VLANMgrMIBGroups 2 }
vlanMgrVlanSetGroup OBJECT-GROUP
OBJECTS
{
vlanSetVlanCount,
vlanSetVlanRouterCount,
vlanSetIpRouterCount,
vlanSetIpxRouterCount,
vlanSetMultiRtrMacStatus
}
STATUS current
DESCRIPTION
"Collection of objects for Vlan Manager global properties."
::= { alcatelIND1VLANMgrMIBGroups 3 }
END