mibs/nokia/TIMETRA-LLDP-MIB
TIMETRA-LLDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
ifIndex
FROM IF-MIB
LldpChassisId, LldpChassisIdSubtype,
LldpManAddrIfSubtype, LldpManAddress,
LldpPortId, LldpPortIdSubtype,
LldpSystemCapabilitiesMap
FROM LLDP-MIB
TimeFilter, ZeroBasedCounter32
FROM RMON2-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Counter64, Integer32,
MODULE-IDENTITY, NOTIFICATION-TYPE,
OBJECT-TYPE
FROM SNMPv2-SMI
MacAddress, TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
TmnxEnabledDisabled,
TmnxEnabledDisabledAdminState
FROM TIMETRA-TC-MIB
;
tmnxLldpMIBModule MODULE-IDENTITY
LAST-UPDATED "201501010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision LLDP on
the Nokia SROS device.
Copyright 2008-2018 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 1 Jan 2015 00:00
13.0 release of the TIMETRA-LLDP-MIB."
REVISION "200902280000Z"
DESCRIPTION
"Rev 7.0 28 Feb 2009 00:00
7.0 release of the TIMETRA-LLDP-MIB."
REVISION "200202020000Z"
DESCRIPTION
"Rev 0.1 26 May 2008 00:00
Initial version of the TIMETRA-LLDP-MIB."
::= { timetraSRMIBModules 59 }
TmnxLldpDestAddressTableIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An index value, used as the index to the table of destination MAC
addresses used both as the destination addresses on transmitted
LLDPDUs and on received LLDPDUs. This index value is also used as a
secondary index value in tables indexed by fields of type ifIndex, in
order to associate a destination address with each row of the table."
SYNTAX Integer32 (1..4096)
TmnxLldpManAddressIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An Index value, used as the index to the table of local port
management addresses, tmnxLldpConfigManAddrPortsTable. The index
represents a specific local management address application on the
system which may, or may not exist."
SYNTAX INTEGER {
oob (0),
system (1),
systemIpv6 (2),
oobIpv6 (3)
}
tmnxLldpObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 59 }
tmnxLldpConfiguration OBJECT IDENTIFIER ::= { tmnxLldpObjects 1 }
tmnxLldpTxCreditMax OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of consecutive LLDPDUs that can be transmitted at
any time. The default value for tmnxLldpTxCreditMax object is 5. The
value of this object must be restored from non-volatile storage after
a re-initialization of the management system."
REFERENCE
"IEEE Std 802.1AB-200X 10.2.5.16"
DEFVAL { 5 }
::= { tmnxLldpConfiguration 1 }
tmnxLldpMessageFastTx OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval at which LLDP frames are transmitted on behalf of this
LLDP agent during fast transmission period (e.g. when a new neighbor
is detected). The default value for tmnxLldpMessageFastTx object is 1
second. The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE Std 802.1AB-200X 10.2.5.3"
DEFVAL { 1 }
::= { tmnxLldpConfiguration 2 }
tmnxLldpMessageFastTxInit OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxLldpMessageFastTxInit specifies the number of PDUs to transmit
during a fast transmission period."
DEFVAL { 4 }
::= { tmnxLldpConfiguration 3 }
tmnxLldpAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabledAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxLldpAdminStatus specifies whether or not LLDP is operationally
'enabled(1)' on the system, or 'disabled(2).' This is a system wide
configuration and overrides the individual port admin status."
::= { tmnxLldpConfiguration 4 }
tmnxLldpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls LLDP frame transmission on individual ports
and using particular destination MAC addresses."
::= { tmnxLldpConfiguration 5 }
tmnxLldpPortConfigEntry OBJECT-TYPE
SYNTAX TmnxLldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information for a particular port and destination
MAC address.
This configuration parameter controls the transmission and the
reception of LLDP frames on those interface/address combinations whose
rows are created in this table.
Rows in this table can only be created for MAC addresses that can
validly be used in association with the type of interface concerned,
as defined by table 8-2.
The contents of this table is persistent across re-initializations or
reboots."
INDEX {
ifIndex,
tmnxLldpPortCfgDestAddressIndex
}
::= { tmnxLldpPortConfigTable 1 }
TmnxLldpPortConfigEntry ::= SEQUENCE
{
tmnxLldpPortCfgDestAddressIndex TmnxLldpDestAddressTableIndex,
tmnxLldpPortCfgAdminStatus INTEGER,
tmnxLldpPortCfgNotifyEnable TruthValue,
tmnxLldpPortCfgTLVsTxEnable BITS,
tmnxLldpPortCfgTunnelNearestBrg INTEGER,
tmnxLldpPortCfgPortIdSubtype LldpPortIdSubtype
}
tmnxLldpPortCfgDestAddressIndex OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the destination MAC address
associated with this entry. Its value identifies the row in the
tmnxLldpPortConfigTable where the MAC address can be found."
::= { tmnxLldpPortConfigEntry 1 }
tmnxLldpPortCfgAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
txOnly (1),
rxOnly (2),
txAndRx (3),
disabled (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired status of the local LLDP agent.
If the associated tmnxLldpPortCfgAdminStatus object has a value of
'txOnly(1)', then LLDP agent will transmit LLDP frames on this port
and it will not store any information about the remote systems
connected.
If the associated tmnxLldpPortCfgAdminStatus object has a value of
'rxOnly(2)', then the LLDP agent will receive, but it will not
transmit LLDP frames on this port.
If the associated tmnxLldpPortCfgAdminStatus object has a value of
'txAndRx(3)', then the LLDP agent will transmit and receive LLDP
frames on this port.
If the associated tmnxLldpPortCfgAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's tmnxLldpPortCfgAdminStatus
becomes disabled, then the information will naturally age out."
REFERENCE
"IEEE 802.1AB-2005 10.5.1"
DEFVAL { disabled }
::= { tmnxLldpPortConfigEntry 2 }
tmnxLldpPortCfgNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxLldpPortCfgNotifyEnable controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not."
DEFVAL { false }
::= { tmnxLldpPortConfigEntry 3 }
tmnxLldpPortCfgTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
portDesc (0),
sysName (1),
sysDesc (2),
sysCap (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxLldpPortCfgTLVsTxEnable, defined as a bitmap, includes the
basic set of LLDP TLVs whose transmission is allowed on the local LLDP
agent by the network management. Each bit in the bitmap corresponds to
a TLV type associated with a specific optional TLV.
It should be noted that the organizationally-specific TLVs are
excluded from the tmnxLldpPortCfgTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should have
similar configuration object to control transmission of their
organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port
Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit 'System
Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System
Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System
Capabilities TLV'.
There is no bit reserved for the management address TLV type since
transmission of management address TLVs are controlled by another
object.
The default value for tmnxLldpPortCfgTLVsTxEnable object is empty set,
which means no enumerated values are set.
The value of this object must be restored from non-volatile storage
after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { {} }
::= { tmnxLldpPortConfigEntry 4 }
tmnxLldpPortCfgTunnelNearestBrg OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxLldpPortCfgTunnelNearestBrg specifies whether or not
the nearest-bridge LLDP session is tunneled.
The default value on a nearest-bridge session is 'disabled (2)'.
Attempts to set this object on a LLDP session that is not a
nearest-bridge, are not permissible."
DEFVAL { notApplicable }
::= { tmnxLldpPortConfigEntry 5 }
tmnxLldpPortCfgPortIdSubtype OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxLldpPortCfgPortIdSubtype specifies what format the
local LLDP agent will use when filling in the portId TLV of the
LLDPDUs it transmits."
REFERENCE
"IEEE 802.1AB-2009 Section 8.5.3.2 and 8.5.3.3"
DEFVAL { local }
::= { tmnxLldpPortConfigEntry 6 }
tmnxLldpConfigManAddrPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpConfigManAddrPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP management address TLV
instances to be transmitted on individual ports."
::= { tmnxLldpConfiguration 6 }
tmnxLldpConfigManAddrPortsEntry OBJECT-TYPE
SYNTAX TmnxLldpConfigManAddrPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of ports on
which the local system management address instance will be
transmitted.
This configuration object joins the tmnxLldpPortConfigTable and the
lldpLocManAddrTable. An entry exists for each Port/Management address
in the system. Rows are auto-created by the system when ports are
provisioned."
INDEX {
ifIndex,
tmnxLldpPortCfgDestAddressIndex,
tmnxLldpPortCfgAddressIndex
}
::= { tmnxLldpConfigManAddrPortsTable 1 }
TmnxLldpConfigManAddrPortsEntry ::= SEQUENCE
{
tmnxLldpPortCfgAddressIndex TmnxLldpManAddressIndex,
tmnxLldpPortCfgManAddrTxEnabled TmnxEnabledDisabled,
tmnxLldpPortCfgManAddrSubtype AddressFamilyNumbers,
tmnxLldpPortCfgManAddress LldpManAddress
}
tmnxLldpPortCfgAddressIndex OBJECT-TYPE
SYNTAX TmnxLldpManAddressIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxLldpPortCfgAddressIndex represents the system man address
associated with a particular row in the
tmnxLldpConfigManAddrPortsTable."
::= { tmnxLldpConfigManAddrPortsEntry 1 }
tmnxLldpPortCfgManAddrTxEnabled OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxLldpPortCfgManAddrTxEnabled specifies whether the port and
MAC address will transmit the management address information."
DEFVAL { disabled }
::= { tmnxLldpConfigManAddrPortsEntry 2 }
tmnxLldpPortCfgManAddrSubtype OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxLldpPortCfgManAddrSubtype indicates the management address
representation in the tmnxLldpPortCfgManAddress object. The value of
'other (0)' indicates that no management address is in use."
::= { tmnxLldpConfigManAddrPortsEntry 3 }
tmnxLldpPortCfgManAddress OBJECT-TYPE
SYNTAX LldpManAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxLldpPortCfgManAddress indicates the management address used by
the tmnxLldpPortCfgAddressIndex."
::= { tmnxLldpConfigManAddrPortsEntry 4 }
tmnxLldpDestAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpDestAddressTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that contains the set of MAC addresses used by LLDP for
transmission and reception of LLDPDUs."
::= { tmnxLldpConfiguration 7 }
tmnxLldpDestAddressTableEntry OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination MAC address information for LLDP.
This configuration parameter identifies a MAC address corresponding to
a TmnxLldpDestAddressTableIndex value.
Rows in this table are created as necessary, to support MAC addresses
needed by other tables in the MIB that are indexed by MAC address.
A given row in this table cannot be deleted if the MAC address table
index value is in use in any other table in the MIB.
The contents of this table is persistent across re-initializations or
reboots."
INDEX { tmnxLldpAddressTableIndex }
::= { tmnxLldpDestAddressTable 1 }
TmnxLldpDestAddressTableEntry ::= SEQUENCE
{
tmnxLldpAddressTableIndex TmnxLldpDestAddressTableIndex,
tmnxLldpDestMacAddress MacAddress
}
tmnxLldpAddressTableIndex OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the destination MAC address
associated with this entry.
The value of this object is used as an index to the
tmnxLldpDestAddressTable."
::= { tmnxLldpDestAddressTableEntry 1 }
tmnxLldpDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated with this entry.
The octet string identifies an individual or a group MAC address that
is in use by LLDP as a destination MAC address. The MAC address is
encoded in the octet string in canonical format (see IEEE Std 802)."
::= { tmnxLldpDestAddressTableEntry 2 }
tmnxLldpStatistics OBJECT IDENTIFIER ::= { tmnxLldpObjects 2 }
tmnxLldpStatsTxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpStatsTxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing LLDP transmission statistics for individual
port/destination address combinations. Entries are not required to
exist in this table while the tmnxLldpPortConfigEntry object is equal
to 'disabled(4)'."
::= { tmnxLldpStatistics 1 }
tmnxLldpStatsTxPortEntry OBJECT-TYPE
SYNTAX TmnxLldpStatsTxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP frame transmission statistics for a particular port and
destination MAC address. The port must be contained in the same
chassis as the LLDP agent.
All counter values in a particular entry shall be maintained on a
continuing basis and shall not be deleted upon expiration of rx Info
TTL timing counters in the LLDP remote systems MIB of the receipt of a
shutdown frame from a remote LLDP agent.
All statistical counters associated with a particular port on the
local LLDP agent become frozen whenever the admin status is disabled
for the same port.
Rows in this table can only be created for MAC addresses that can
validly be used in association with the type of interface concerned,
as defined by table 8-2.
The contents of this table is persistent across re-initializations or
reboots."
INDEX {
ifIndex,
tmnxLldpStatsTxDestMACAddress
}
::= { tmnxLldpStatsTxPortTable 1 }
TmnxLldpStatsTxPortEntry ::= SEQUENCE
{
tmnxLldpStatsTxDestMACAddress TmnxLldpDestAddressTableIndex,
tmnxLldpStatsTxPortFrames Counter32,
tmnxLldpStatsTxLLDPDULengthErrs Counter32
}
tmnxLldpStatsTxDestMACAddress OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the destination MAC address
associated with this entry. Its value identifies the row in the
tmnxLldpPortConfigTable where the MAC address can be found.
The value of this object is used as an index to the
tmnxLldpStatsTxPortTable."
::= { tmnxLldpStatsTxPortEntry 1 }
tmnxLldpStatsTxPortFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP frames transmitted by this LLDP agent on the
indicated port."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsTxPortEntry 2 }
tmnxLldpStatsTxLLDPDULengthErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDPD Length Errors recorded for the Port."
REFERENCE
"IEEE Std 802.1AB-200X 10.2.7.2"
::= { tmnxLldpStatsTxPortEntry 3 }
tmnxLldpStatsRxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpStatsRxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing LLDP reception statistics for individual ports and
destination MAC addresses. Entries are not required to exist in this
table while the tmnxLldpPortCfgAdminStatus object is equal to
'disabled(4)'."
::= { tmnxLldpStatistics 2 }
tmnxLldpStatsRxPortEntry OBJECT-TYPE
SYNTAX TmnxLldpStatsRxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP frame reception statistics for a particular port. The port must
be contained in the same chassis as the LLDP agent.
All counter values in a particular entry shall be maintained on a
continuing basis and shall not be deleted upon expiration of rx Info
TTL timing counters in the LLDP remote systems MIB of the receipt of a
shutdown frame from a remote LLDP agent.
All statistical counters associated with a particular port on the
local LLDP agent become frozen whenever the admin status is disabled
for the same port.
Rows in this table can only be created for MAC addresses that can
validly be used in association with the type of interface concerned,
as defined by table 8-2.
The contents of this table is persistent across re-initializations or
reboots."
INDEX {
ifIndex,
tmnxLldpStatsRxDestMACAddress
}
::= { tmnxLldpStatsRxPortTable 1 }
TmnxLldpStatsRxPortEntry ::= SEQUENCE
{
tmnxLldpStatsRxDestMACAddress TmnxLldpDestAddressTableIndex,
tmnxLldpStatsRxPortFrameDiscard Counter32,
tmnxLldpStatsRxPortFrameErrs Counter32,
tmnxLldpStatsRxPortFrames Counter32,
tmnxLldpStatsRxPortTLVDiscard Counter32,
tmnxLldpStatsRxPortTLVUnknown Counter32,
tmnxLldpStatsRxPortAgeouts ZeroBasedCounter32
}
tmnxLldpStatsRxDestMACAddress OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the destination MAC address
associated with this entry. Its value identifies the row in the
tmnxLldpStatsRxPortTable where the MAC address can be found."
::= { tmnxLldpStatsRxPortEntry 1 }
tmnxLldpStatsRxPortFrameDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP frames received by this LLDP agent on the indicated
port, and then discarded for any reason. This counter can provide an
indication that LLDP header formatting problems may exist with the
local LLDP agent in the sending system or that LLDPDU validation
problems may exist with the local LLDP agent in the receiving system."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsRxPortEntry 2 }
tmnxLldpStatsRxPortFrameErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid LLDP frames received by this LLDP agent on the
indicated port, while this LLDP agent is enabled."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsRxPortEntry 3 }
tmnxLldpStatsRxPortFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid LLDP frames received by this LLDP agent on the
indicated port, while this LLDP agent is enabled."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsRxPortEntry 4 }
tmnxLldpStatsRxPortTLVDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP TLVs discarded for any reason by this LLDP agent on
the indicated port."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsRxPortEntry 5 }
tmnxLldpStatsRxPortTLVUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LLDP TLVs received on the given port that are not
recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value is in
the range of reserved TLV types (000 1001 - 111 1110) in Table 9.1 of
IEEE Std 802.1AB-2004. An unrecognized TLV may be a basic management
TLV from a later LLDP version."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsRxPortEntry 6 }
tmnxLldpStatsRxPortAgeouts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter that represents the number of age-outs that occurred on a
given port. An age-out is the number of times the complete set of
information advertised by a particular MSAP has been deleted from
tables contained in tmnxLldpRemoteSystemsData and lldpExtensions
objects because the information timeliness interval has expired.
This counter is similar to lldpStatsRemTablesAgeouts, except that the
counter is on a per port basis. This enables NMS to poll tables
associated with the tmnxLldpRemoteSystemsData objects and all LLDP
extension objects associated with remote systems on the indicated port
only.
This counter should be set to zero during agent initialization and its
value should not be saved in non-volatile storage. When a port's admin
status changes from 'disabled' to 'rxOnly', 'txOnly' or 'txAndRx', the
counter associated with the same port should reset to 0. The agent
should also flush all remote system information associated with the
same port.
This counter should be incremented only once when the complete set of
information is invalidated (aged out) from all related tables on a
particular port. Partial ageing is not allowed, and thus, should not
change the value of this counter."
REFERENCE
"IEEE Std 802.1AB-200X 10.5.2"
::= { tmnxLldpStatsRxPortEntry 7 }
tmnxLldpLocalSystemData OBJECT IDENTIFIER ::= { tmnxLldpObjects 3 }
tmnxLldpLocPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpLocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows, per port and destination MAC
address, of information associated with the local system known to this
agent."
::= { tmnxLldpLocalSystemData 1 }
tmnxLldpLocPortEntry OBJECT-TYPE
SYNTAX TmnxLldpLocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component.
Entries may be created and deleted in this table by the agent.
Rows in this table can only be created for MAC addresses that can
validly be used in association with the type of interface concerned,
as defined by table 8-2.
The contents of this table is persistent across re-initializations or
reboots."
INDEX {
ifIndex,
tmnxLldpLocPortDestMACAddress
}
::= { tmnxLldpLocPortTable 1 }
TmnxLldpLocPortEntry ::= SEQUENCE
{
tmnxLldpLocPortDestMACAddress TmnxLldpDestAddressTableIndex,
tmnxLldpLocPortIdSubtype LldpPortIdSubtype,
tmnxLldpLocPortId LldpPortId,
tmnxLldpLocPortDesc SnmpAdminString
}
tmnxLldpLocPortDestMACAddress OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the destination MAC address
associated with this entry. Its value identifies the row in the
tmnxLldpLocPortTable where the MAC address can be found."
::= { tmnxLldpLocPortEntry 1 }
tmnxLldpLocPortIdSubtype OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port identifier encoding used in the associated
tmnxLldpLocPortId object."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.3.2"
::= { tmnxLldpLocPortEntry 2 }
tmnxLldpLocPortId OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the port component associated with a
given port in the local system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.3.3"
::= { tmnxLldpLocPortEntry 3 }
tmnxLldpLocPortDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the IEEE 802 LAN station's port
description associated with the local system. If the local agent
supports IETF RFC 2863, tmnxLldpLocPortDesc object should have the
same value of ifDescr object."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.5.2"
::= { tmnxLldpLocPortEntry 4 }
tmnxLldpRemoteSystemsData OBJECT IDENTIFIER ::= { tmnxLldpObjects 4 }
tmnxLldpRemTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpRemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network connection
known to this agent. The agent may wish to ensure that only one
tmnxLldpRemEntry is present for each local port and destination MAC
address, or it may choose to maintain multiple tmnxLldpRemEntry rows
for the same local port and destination MAC address.
The following procedure may be used to retrieve remote systems
information updates from an LLDP agent:
1. NMS polls all tables associated with remote systems
and keeps a local copy of the information retrieved.
NMS polls periodically the values of the following
objects:
a. lldpStatsRemTablesInserts
b. lldpStatsRemTablesDeletes
c. lldpStatsRemTablesDrops
d. lldpStatsRemTablesAgeouts
e. tmnxLldpStatsRxPortAgeouts for all ports.
2. LLDP agent updates remote systems MIB objects, and
sends out notifications to a list of notification
destinations.
3. NMS receives the notifications and compares the new
values of objects listed in step 1.
Periodically, NMS should poll the object
lldpStatsRemTablesLastChangeTime to find out if anything
has changed since the last poll. if something has
changed, NMS will poll the objects listed in step 1 to
figure out what kind of changes occurred in the tables.
if value of lldpStatsRemTablesInserts has changed,
then NMS will walk all tables by employing TimeFilter
with the last-polled time value. This request will
return new objects or objects whose values are updated
since the last poll.
if value of lldpStatsRemTablesAgeouts has changed,
then NMS will walk the tmnxLldpStatsRxPortAgeouts and
compare the new values with previously recorded ones.
For ports whose tmnxLldpStatsRxPortAgeouts value is
greater than the recorded value, NMS will have to
retrieve objects associated with those ports from
table(s) without employing a TimeFilter (which is
performed by specifying 0 for the TimeFilter.)
lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
objects are provided for informational purposes."
::= { tmnxLldpRemoteSystemsData 1 }
tmnxLldpRemEntry OBJECT-TYPE
SYNTAX TmnxLldpRemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection. Entries
may be created and deleted in this table by the agent, if a physical
topology discovery process is active.
Rows in this table can only be created for MAC addresses that can
validly be used in association with the type of interface concerned,
as defined by table 8-2.
The contents of this table is persistent across re-initializations or
reboots."
INDEX {
tmnxLldpRemTimeMark,
ifIndex,
tmnxLldpRemLocalDestMACAddress,
tmnxLldpRemIndex
}
::= { tmnxLldpRemTable 1 }
TmnxLldpRemEntry ::= SEQUENCE
{
tmnxLldpRemTimeMark TimeFilter,
tmnxLldpRemLocalDestMACAddress TmnxLldpDestAddressTableIndex,
tmnxLldpRemIndex Integer32,
tmnxLldpRemChassisIdSubtype LldpChassisIdSubtype,
tmnxLldpRemChassisId LldpChassisId,
tmnxLldpRemPortIdSubtype LldpPortIdSubtype,
tmnxLldpRemPortId LldpPortId,
tmnxLldpRemPortDesc SnmpAdminString,
tmnxLldpRemSysName SnmpAdminString,
tmnxLldpRemSysDesc SnmpAdminString,
tmnxLldpRemSysCapSupported LldpSystemCapabilitiesMap,
tmnxLldpRemSysCapEnabled LldpSystemCapabilitiesMap,
tmnxLldpRemSysAge Counter64
}
tmnxLldpRemTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual convention in
IETF RFC 4502 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to
see how TimeFilter works."
REFERENCE
"IETF RFC 4502 section 6"
::= { tmnxLldpRemEntry 1 }
tmnxLldpRemLocalDestMACAddress OBJECT-TYPE
SYNTAX TmnxLldpDestAddressTableIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the destination MAC address
associated with this entry. Its value identifies the row in the
tmnxLldpRemTable where the MAC address can be found."
::= { tmnxLldpRemEntry 2 }
tmnxLldpRemIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used by this
agent to identify a particular connection instance, unique only for
the indicated remote system.
An agent is encouraged to assign monotonically increasing index values
to new entries, starting with one, after each reboot. It is considered
unlikely that the tmnxLldpRemIndex will wrap between reboots."
::= { tmnxLldpRemEntry 3 }
tmnxLldpRemChassisIdSubtype OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLldpRemChassisIdSubtype indicates the chassis
identifier subtype provided by the remote system. The corresponding
chassis identifier is tmnxLldpRemChassisId."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.2.2"
::= { tmnxLldpRemEntry 4 }
tmnxLldpRemChassisId OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the chassis component associated
with the remote system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.2.3"
::= { tmnxLldpRemEntry 5 }
tmnxLldpRemPortIdSubtype OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLldpRemPortIdSubtype indicates the port identifier
subtype provided by the remote system. The corresponding port
identifier is tmnxLldpRemPortId."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.3.2"
::= { tmnxLldpRemEntry 6 }
tmnxLldpRemPortId OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the port component associated with
the remote system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.3.3"
::= { tmnxLldpRemEntry 7 }
tmnxLldpRemPortDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the description of the given port
associated with the remote system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.5.2"
::= { tmnxLldpRemEntry 8 }
tmnxLldpRemSysName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the system name of the remote
system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.6.2"
::= { tmnxLldpRemEntry 9 }
tmnxLldpRemSysDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the system description of the remote
system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.7.2"
::= { tmnxLldpRemEntry 10 }
tmnxLldpRemSysCapSupported OBJECT-TYPE
SYNTAX LldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which system capabilities are
supported on the remote system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.8.1"
::= { tmnxLldpRemEntry 11 }
tmnxLldpRemSysCapEnabled OBJECT-TYPE
SYNTAX LldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which system capabilities are
enabled on the remote system."
REFERENCE
"IEEE Std 802.1AB-200X 9.5.8.2"
::= { tmnxLldpRemEntry 12 }
tmnxLldpRemSysAge OBJECT-TYPE
SYNTAX Counter64
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLldpRemSysAge indicates the number of seconds since
the remote system was discovered."
::= { tmnxLldpRemEntry 13 }
tmnxLldpRemManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxLldpRemManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent."
::= { tmnxLldpRemoteSystemsData 2 }
tmnxLldpRemManAddrEntry OBJECT-TYPE
SYNTAX TmnxLldpRemManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
tmnxLldpRemIndex whose information is received on
ifIndex and tmnxLldpRemLocalDestMACAddress of the local system.
Each management address should have distinct 'management address
type' (tmnxLldpRemManAddrSubtype) and 'management address'
(tmnxLldpRemManAddr.)
Entries may be created and deleted in this table by the agent."
INDEX {
tmnxLldpRemTimeMark,
ifIndex,
tmnxLldpRemLocalDestMACAddress,
tmnxLldpRemIndex,
tmnxLldpRemManAddrSubtype,
tmnxLldpRemManAddr
}
::= { tmnxLldpRemManAddrTable 1 }
TmnxLldpRemManAddrEntry ::= SEQUENCE
{
tmnxLldpRemManAddrSubtype AddressFamilyNumbers,
tmnxLldpRemManAddr LldpManAddress,
tmnxLldpRemManAddrIfSubtype LldpManAddrIfSubtype,
tmnxLldpRemManAddrIfId Integer32,
tmnxLldpRemManAddrOID OBJECT IDENTIFIER
}
tmnxLldpRemManAddrSubtype OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of management address identifier encoding used in
the associated tmnxLldpRemManAddr object."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.3"
::= { tmnxLldpRemManAddrEntry 1 }
tmnxLldpRemManAddr OBJECT-TYPE
SYNTAX LldpManAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.4"
::= { tmnxLldpRemManAddrEntry 2 }
tmnxLldpRemManAddrIfSubtype OBJECT-TYPE
SYNTAX LldpManAddrIfSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxLldpRemManAddrIfSubtype indicates the interface
numbering subtype provided by the remote system. The corresponding
interface number is tmnxLldpRemManAddrIfId."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.5"
::= { tmnxLldpRemManAddrEntry 3 }
tmnxLldpRemManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the interface number regarding the
management address component associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.6"
::= { tmnxLldpRemManAddrEntry 4 }
tmnxLldpRemManAddrOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OID value used to identify the type of hardware component or
protocol entity associated with the management address advertised by
the remote system agent."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.8"
::= { tmnxLldpRemManAddrEntry 5 }
tmnxLldpConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 59 }
tmnxLldpCompliances OBJECT IDENTIFIER ::= { tmnxLldpConformance 1 }
tmnxLldpCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement the LLDP
MIB."
MODULE
MANDATORY-GROUPS {
tmnxLldpConfigGroup,
tmnxLldpStatsRxGroup,
tmnxLldpStatsTxGroup,
tmnxLldpLocSysGroup,
tmnxLldpRemSysGroup,
tmnxLldpRemManAddrGroup
}
::= { tmnxLldpCompliances 1 }
tmnxLldpV11v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement the LLDP
MIB for release 11.0 of the SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxLldpConfigGroup,
tmnxLldpConfigV11v0Group,
tmnxLldpStatsRxGroup,
tmnxLldpStatsTxGroup,
tmnxLldpLocSysGroup,
tmnxLldpRemSysGroup,
tmnxLldpRemManAddrGroup
}
::= { tmnxLldpCompliances 2 }
tmnxLldpV13v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement the LLDP
MIB for release 13.0 of the SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxLldpConfigV13v0Group
}
::= { tmnxLldpCompliances 3 }
tmnxLldpV16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement the LLDP
MIB for release 16.0 of the SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxLldpRemSysV16v0Group,
tmnxLldpNotifV16v0Group
}
::= { tmnxLldpCompliances 4 }
tmnxLldpGroups OBJECT IDENTIFIER ::= { tmnxLldpConformance 2 }
tmnxLldpConfigGroup OBJECT-GROUP
OBJECTS {
tmnxLldpTxCreditMax,
tmnxLldpMessageFastTx,
tmnxLldpMessageFastTxInit,
tmnxLldpAdminStatus,
tmnxLldpPortCfgAdminStatus,
tmnxLldpPortCfgNotifyEnable,
tmnxLldpPortCfgTLVsTxEnable,
tmnxLldpPortCfgManAddrTxEnabled,
tmnxLldpPortCfgManAddrSubtype,
tmnxLldpPortCfgManAddress,
tmnxLldpDestMacAddress
}
STATUS current
DESCRIPTION
"The collection of objects which are used to configure the LLDP
implementation behavior.
This group is mandatory for agents which implement the LLDP."
::= { tmnxLldpGroups 1 }
tmnxLldpStatsRxGroup OBJECT-GROUP
OBJECTS {
tmnxLldpStatsRxPortFrameDiscard,
tmnxLldpStatsRxPortFrameErrs,
tmnxLldpStatsRxPortFrames,
tmnxLldpStatsRxPortTLVDiscard,
tmnxLldpStatsRxPortTLVUnknown,
tmnxLldpStatsRxPortAgeouts
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent LLDP reception
statistics.
This group is mandatory for agents which implement the LLDP and have
the capability of receiving LLDP frames."
::= { tmnxLldpGroups 2 }
tmnxLldpStatsTxGroup OBJECT-GROUP
OBJECTS {
tmnxLldpStatsTxPortFrames,
tmnxLldpStatsTxLLDPDULengthErrs
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent LLDP
transmission statistics.
This group is mandatory for agents which implement the LLDP and have
the capability of transmitting LLDP frames."
::= { tmnxLldpGroups 3 }
tmnxLldpLocSysGroup OBJECT-GROUP
OBJECTS {
tmnxLldpLocPortIdSubtype,
tmnxLldpLocPortId,
tmnxLldpLocPortDesc
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent LLDP Local
System Information.
This group is mandatory for agents which implement the LLDP and have
the capability of transmitting LLDP frames."
::= { tmnxLldpGroups 4 }
tmnxLldpRemSysGroup OBJECT-GROUP
OBJECTS {
tmnxLldpRemChassisIdSubtype,
tmnxLldpRemChassisId,
tmnxLldpRemPortIdSubtype,
tmnxLldpRemPortId,
tmnxLldpRemPortDesc,
tmnxLldpRemSysName,
tmnxLldpRemSysDesc,
tmnxLldpRemSysCapSupported,
tmnxLldpRemSysCapEnabled
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent LLDP Remote
Systems Information. The objects represent the information associated
with the basic TLV set. Please note that even the agent doesn't
implement some of the optional TLVs, it shall recognize all the
optional TLV information that the remote system may advertise.
This group is mandatory for agents which implement the LLDP and have
the capability of receiving LLDP frames."
::= { tmnxLldpGroups 5 }
tmnxLldpRemManAddrGroup OBJECT-GROUP
OBJECTS {
tmnxLldpRemManAddrIfSubtype,
tmnxLldpRemManAddrIfId,
tmnxLldpRemManAddrOID
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent LLDP Remote
management address information.
This group is mandatory for agents which implement the LLDP and have
the capability of receiving LLDP frames."
::= { tmnxLldpGroups 6 }
tmnxLldpV11v0Groups OBJECT IDENTIFIER ::= { tmnxLldpGroups 11 }
tmnxLldpConfigV11v0Group OBJECT-GROUP
OBJECTS {
tmnxLldpPortCfgTunnelNearestBrg
}
STATUS current
DESCRIPTION
"The additional collection of objects which are used to configure the
LLDP implementation behavior for Nokia SROS systems in Release 11.0."
::= { tmnxLldpV11v0Groups 1 }
tmnxLldpV13v0Groups OBJECT IDENTIFIER ::= { tmnxLldpGroups 12 }
tmnxLldpConfigV13v0Group OBJECT-GROUP
OBJECTS {
tmnxLldpPortCfgPortIdSubtype
}
STATUS current
DESCRIPTION
"The additional collection of objects which are used to configure the
LLDP implementation behavior for Nokia SROS systems in Release 13.0."
::= { tmnxLldpV13v0Groups 1 }
tmnxLldpV16v0Groups OBJECT IDENTIFIER ::= { tmnxLldpGroups 13 }
tmnxLldpRemSysV16v0Group OBJECT-GROUP
OBJECTS {
tmnxLldpRemSysAge
}
STATUS current
DESCRIPTION
"The additional collection of objects which are used to represent LLDP
Remote Systems Information for Nokia SROS series systems in Release
16.0."
::= { tmnxLldpV16v0Groups 1 }
tmnxLldpNotifV16v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxLldpRemEntryPeerAdded,
tmnxLldpRemEntryPeerUpdated,
tmnxLldpRemEntryPeerRemoved,
tmnxLldpRemManAddrEntryAdded,
tmnxLldpRemManAddrEntryRemoved
}
STATUS current
DESCRIPTION
"The group of notifications supporting LLDP Remote Systems Information
for Nokia SROS series systems for release 16.0."
::= { tmnxLldpV16v0Groups 2 }
tmnxLldpNotifications OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 59 }
tmnxLldpNotifs OBJECT IDENTIFIER ::= { tmnxLldpNotifications 0 }
tmnxLldpRemEntryPeerAdded NOTIFICATION-TYPE
OBJECTS {
tmnxLldpRemSysName,
tmnxLldpRemChassisId,
tmnxLldpRemChassisIdSubtype,
tmnxLldpRemPortId,
tmnxLldpRemPortIdSubtype
}
STATUS current
DESCRIPTION
"The tmnxLldpRemEntryPeerAdded notification is generated when a new
remote peer is added to the LLDP."
::= { tmnxLldpNotifs 1 }
tmnxLldpRemEntryPeerUpdated NOTIFICATION-TYPE
OBJECTS {
tmnxLldpRemSysName,
tmnxLldpRemChassisId,
tmnxLldpRemChassisIdSubtype,
tmnxLldpRemPortId,
tmnxLldpRemPortIdSubtype
}
STATUS current
DESCRIPTION
"The tmnxLldpRemEntryPeerUpdated notification is generated when a
tmnxLldpRemSysName changes for an existing peer"
::= { tmnxLldpNotifs 2 }
tmnxLldpRemEntryPeerRemoved NOTIFICATION-TYPE
OBJECTS {
tmnxLldpRemSysName,
tmnxLldpRemChassisId,
tmnxLldpRemChassisIdSubtype,
tmnxLldpRemPortId,
tmnxLldpRemPortIdSubtype
}
STATUS current
DESCRIPTION
"The tmnxLldpRemEntryPeerRemoved notification is generated when a
remote peer is deleted from the LLDP."
::= { tmnxLldpNotifs 3 }
tmnxLldpRemManAddrEntryAdded NOTIFICATION-TYPE
OBJECTS {
tmnxLldpRemManAddrIfId
}
STATUS current
DESCRIPTION
"The tmnxLldpRemManAddrEntryAdded notification is generated when a
remote peer management address is added to the LLDP"
::= { tmnxLldpNotifs 4 }
tmnxLldpRemManAddrEntryRemoved NOTIFICATION-TYPE
OBJECTS {
tmnxLldpRemManAddrIfId
}
STATUS current
DESCRIPTION
"The tmnxLldpRemManAddrEntryRemoved notification is generated when a
remote peer management address is deleted from the LLDP"
::= { tmnxLldpNotifs 5 }
END