mibs/nokia/TIMETRA-MPLS-MIB
TIMETRA-MPLS-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndexOrZero
FROM IF-MIB
InetAddress, InetAddressIPv6,
InetAddressType
FROM INET-ADDRESS-MIB
MplsLSPID, MplsLabel,
mplsInSegmentEntry, mplsOutSegmentEntry,
mplsXCLspId
FROM MPLS-LSR-MIB
MplsTunnelIndex, mplsTunnelARHopEntry,
mplsTunnelIndex, mplsTunnelIngressLSRId,
mplsTunnelInstance
FROM MPLS-TE-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Counter64, Gauge32,
Integer32, IpAddress, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DisplayString, RowPointer, RowStatus,
TEXTUAL-CONVENTION, TestAndIncr,
TimeInterval, TimeStamp, TruthValue
FROM SNMPv2-TC
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
TFCType, TLNamedItem,
TLNamedItemOrEmpty, TNamedItem,
TNamedItemOrEmpty,
TPolicyStatementNameOrEmpty,
TmnxActionType, TmnxAdminState,
TmnxCBFClasses, TmnxEnabledDisabled,
TmnxMplsLabel, TmnxMplsLabelOrZero,
TmnxMplsLspBandwidth,
TmnxMplsTpGlobalID, TmnxMplsTpNodeID,
TmnxNhgDownReason, TmnxOperState,
TmnxRsvpDSTEClassType, TmnxTimeInterval,
TmnxVRtrMplsLspID
FROM TIMETRA-TC-MIB
vRtrID, vRtrIfIndex
FROM TIMETRA-VRTR-MIB
;
timetraMplsMIBModule MODULE-IDENTITY
LAST-UPDATED "201701010000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the MPLS
extensions for the Nokia SROS device.
Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201701010000Z"
DESCRIPTION
"Rev 15.0 1 Jan 2017 00:00
15.0 release of the TIMETRA-MPLS-MIB."
REVISION "201601010000Z"
DESCRIPTION
"Rev 14.0 1 Jan 2016 00:00
14.0 release of the TIMETRA-MPLS-MIB."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 1 Jan 2015 00:00
13.0 release of the TIMETRA-MPLS-MIB."
REVISION "201401010000Z"
DESCRIPTION
"Rev 12.0 1 Jan 2014 00:00
12.0 release of the TIMETRA-MPLS-MIB."
REVISION "201102010000Z"
DESCRIPTION
"Rev 9.0 1 Feb 2011 00:00
9.0 release of the TIMETRA-MPLS-MIB."
REVISION "200902280000Z"
DESCRIPTION
"Rev 7.0 28 Feb 2009 00:00
7.0 release of the TIMETRA-MPLS-MIB."
REVISION "200807010000Z"
DESCRIPTION
"Rev 6.1 01 Jul 2008 00:00
6.1 release of the TIMETRA-MPLS-MIB."
REVISION "200801010000Z"
DESCRIPTION
"Rev 6.0 01 Jan 2008 00:00
6.0 release of the TIMETRA-MPLS-MIB."
REVISION "200701010000Z"
DESCRIPTION
"Rev 5.0 01 Jan 2007 00:00
5.0 release of the TIMETRA-MPLS-MIB."
REVISION "200603230000Z"
DESCRIPTION
"Rev 4.0 23 Mar 2006 00:00
4.0 release of the TIMETRA-MPLS-MIB."
REVISION "200508310000Z"
DESCRIPTION
"Rev 3.0 31 Aug 2005 00:00
3.0 release of the TIMETRA-MPLS-MIB."
REVISION "200501240000Z"
DESCRIPTION
"Rev 2.1 24 Jan 2005 00:00
2.1 release of the TIMETRA-MPLS-MIB."
REVISION "200401150000Z"
DESCRIPTION
"Rev 2.0 15 Jan 2004 00:00
2.0 release of the TIMETRA-MPLS-MIB."
REVISION "200308150000Z"
DESCRIPTION
"Rev 1.2 15 Aug 2003 00:00
1.2 release of the TIMETRA-MPLS-MIB."
REVISION "200009070000Z"
DESCRIPTION
"Rev 1.0 20 Jan 2003 00:00
1.0 Release of the TIMETRA-MPLS-MIB."
REVISION "200008140000Z"
DESCRIPTION
"Rev 0.1 14 Aug 2000 00:00
Initial version of the TIMETRA-MPLS-MIB."
::= { timetraSRMIBModules 6 }
TmnxMplsLspFailCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsLspFailCode is an enumerated integer that defines the reason
for LSP Path and LSP Crossconnect failure."
SYNTAX INTEGER {
noError (0),
admissionControlError (1),
noRouteToDestination (2),
trafficControlSystemError (3),
routingError (4),
noResourcesAvailable (5),
badNode (6),
routingLoop (7),
labelAllocationError (8),
badL3PID (9),
tunnelLocallyRepaired (10),
unknownObjectClass (11),
unknownCType (12),
noEgressMplsInterface (13),
noEgressRsvpInterface (14),
looseHopsInFRRLsp (15),
unknown (16),
retryExceeded (17),
noCspfRouteOwner (18),
noCspfRouteToDestination (19),
hopLimitExceeded (20),
looseHopsInManualBypassLsp (21),
emptyPathInManualBypassLsp (22),
lspFlowControlled (23),
srlgSecondaryNotDisjoint (24),
srlgPrimaryCspfDisabled (25),
srlgPrimaryPathDown (26),
localLinkMaintenance (27),
unexpectedCtObject (28),
unsupportedCt (29),
invalidCt (30),
invCtAndSetupPri (31),
invCtAndHoldPri (32),
invCtAndSetupAndHoldPri (33),
localNodeMaintenance (34),
softPreemption (35),
p2mpNotSupported (36),
badXro (37),
localNodeInXro (38),
routeBlockedByXro (39),
xroTooComplex (40),
rsvpNotSupported (41),
conflictingAdminGroups (42),
nodeInIgpOverload (43),
srTunnelDown (44),
fibAddFailed (45),
labelStackExceeded (46),
pccDown (47),
pccError (48),
pceDown (49),
pceError (50),
pceUpdateWithEmptyEro (51),
pceInitLspDisabled (52),
adminDown (53),
sidHopsInRsvpLsp (54),
ipv6HopsInRsvpLsp (55),
ipv4HopsInIpv6Lsp (56),
ipv6HopsInIpv4Lsp (57),
sidHopsInIpv6Lsp (58),
srlgPathWithSidHops (59),
mplsV4Down (60),
mplsV6Down (61),
lspAdminDown (62),
pathAdminDown (63),
templateAdminDown (64)
}
TmnxMplsLabelOwner ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsLabelOwner is an enumerated integer that specifies the module
that owns a particular MPLS label."
SYNTAX INTEGER {
none (0),
rsvp (1),
tldp (2),
ildp (3),
svcmgr (4),
bgp (5),
mirror (6),
static (7),
vprn (8),
sr (9)
}
TmnxMplsOperDownReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsOperDownReasonCode is an enumerated integer that specifies the
reason that the MPLS instance is operationally down."
SYNTAX INTEGER {
operUp (0),
adminDown (1),
noResources (2),
systemIpDown (3),
iomFailure (4),
clearDown (5),
ipv6TeRtrDown (6),
ipv6TeRtrAddrChanged (7),
ipv6TeRtrIdIntfDown (8)
}
TmnxMplsMBBType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsMBBType is an enumerated integer that specifies the type of
make-before-break (MBB)."
SYNTAX INTEGER {
none (0),
configChange (1),
timerBasedResignal (2),
manualResignal (3),
globalRevert (4),
delayedRetry (5),
gracefulShutdown (6),
softPreemption (7),
pathChange (8),
autoBandwidth (9),
pceLspUpdate (10)
}
TmnxMplsP2mpInstFailCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsP2mpInstFailCode is an enumerated integer that defines the
reason for P2MP instance going down."
SYNTAX INTEGER {
noError (0),
noS2LOperational (1)
}
TmnxMplsRouterId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The value of TmnxMplsRouterId provides a 32-bit, unsigned integer
uniquely identifying the router in the Autonomous System. To ensure
uniqueness, this may default to the value of one of the router's IPv4
host addresses if IPv4 is configured on the router."
SYNTAX Unsigned32 (0..4294967295)
TmnxMplsLspAutoBWLastAdjCause ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsLspAutoBWLastAdjCause is an enumerated integer that specifies
cause of auto-bandwidth last adjustment."
SYNTAX INTEGER {
none (0),
manual (1),
normal (2),
overflow (3),
vllCAC (4),
underflow (5),
activePathChange (6)
}
TmnxMplsLspBgpRSVPLSPTunState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsLspBgpRSVPLSPTunState is an enumerated integer that specifies
whether an RSVP LSP is allowed or blocked in its usage as a transport
LSP for BGP tunnel routes.
In 'include(1)' mode, an RSVP LSPs is allowed to be used as transport
LSP for BGP tunnel routes.
In 'exclude(2)' mode, an RSVP LSP is not allowed to be used as a
transport LSP for BGP tunnel routes."
SYNTAX INTEGER {
include (1),
exclude (2)
}
TmnxMplsLspAddrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMplsLspAddrType is an enumerated integer that specifies the
address type for an MPLS LSP."
SYNTAX INTEGER {
unknown (0),
ipv4 (1),
nodeId (2),
ipv6 (3)
}
tmnxMplsObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 6 }
vRtrMplsLspTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP)
configured for a virtual router in the system."
::= { tmnxMplsObjs 1 }
vRtrMplsLspEntry OBJECT-TYPE
SYNTAX VRtrMplsLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspName to have been assigned a valid value."
INDEX {
vRtrID,
vRtrMplsLspIndex
}
::= { vRtrMplsLspTable 1 }
VRtrMplsLspEntry ::= SEQUENCE
{
vRtrMplsLspIndex TmnxVRtrMplsLspID,
vRtrMplsLspRowStatus RowStatus,
vRtrMplsLspLastChange TimeStamp,
vRtrMplsLspName TLNamedItemOrEmpty,
vRtrMplsLspAdminState TmnxAdminState,
vRtrMplsLspOperState TmnxOperState,
vRtrMplsLspFromAddr IpAddress,
vRtrMplsLspToAddr IpAddress,
vRtrMplsLspType INTEGER,
vRtrMplsLspOutSegIndx Integer32,
vRtrMplsLspRetryTimer Unsigned32,
vRtrMplsLspRetryLimit Unsigned32,
vRtrMplsLspMetric Unsigned32,
vRtrMplsLspDecrementTtl TruthValue,
vRtrMplsLspCspf TruthValue,
vRtrMplsLspFastReroute TruthValue,
vRtrMplsLspFRHopLimit Unsigned32,
vRtrMplsLspFRBandwidth Unsigned32,
vRtrMplsLspClassOfService TNamedItemOrEmpty,
vRtrMplsLspSetupPriority Unsigned32,
vRtrMplsLspHoldPriority Unsigned32,
vRtrMplsLspRecord TruthValue,
vRtrMplsLspPreference Unsigned32,
vRtrMplsLspBandwidth Integer32,
vRtrMplsLspBwProtect TruthValue,
vRtrMplsLspHopLimit Unsigned32,
vRtrMplsLspNegotiatedMTU Unsigned32,
vRtrMplsLspRsvpResvStyle INTEGER,
vRtrMplsLspRsvpAdspec TruthValue,
vRtrMplsLspFRMethod INTEGER,
vRtrMplsLspFRNodeProtect TruthValue,
vRtrMplsLspAdminGroupInclude Unsigned32,
vRtrMplsLspAdminGroupExclude Unsigned32,
vRtrMplsLspAdaptive TruthValue,
vRtrMplsLspInheritance Unsigned32,
vRtrMplsLspOptimizeTimer Unsigned32,
vRtrMplsLspOperFastReroute TruthValue,
vRtrMplsLspFRObject TruthValue,
vRtrMplsLspHoldTimer Unsigned32,
vRtrMplsLspCspfTeMetricEnabled TruthValue,
vRtrMplsLspP2mpId Unsigned32,
vRtrMplsLspClassType TmnxRsvpDSTEClassType,
vRtrMplsLspOperMetric Unsigned32,
vRtrMplsLspLdpOverRsvpInclude TruthValue,
vRtrMplsLspLeastFill TruthValue,
vRtrMplsLspVprnAutoBindInclude TruthValue,
vRtrMplsLspMainCTRetryLimit Unsigned32,
vRtrMplsLspIgpShortcut TruthValue,
vRtrMplsLspOriginTemplate TNamedItemOrEmpty,
vRtrMplsLspAutoBandwidth TruthValue,
vRtrMplsLspCspfToFirstLoose TruthValue,
vRtrMplsLspPropAdminGroup TruthValue,
vRtrMplsLspBgpShortcut TruthValue,
vRtrMplsLspBgpTransportTunnel TmnxMplsLspBgpRSVPLSPTunState,
vRtrMplsLspSwitchStbyPath TmnxActionType,
vRtrMplsLspSwitchStbyPathIndex MplsTunnelIndex,
vRtrMplsLspSwitchStbyPathForce TruthValue,
vRtrMplsLspExcludeNodeAddrType InetAddressType,
vRtrMplsLspExcludeNodeAddr InetAddress,
vRtrMplsLspIgpShortcutLfaType INTEGER,
vRtrMplsLspToAddrType TmnxMplsLspAddrType,
vRtrMplsLspFromAddrType TmnxMplsLspAddrType,
vRtrMplsLspToNodeId TmnxMplsTpNodeID,
vRtrMplsLspFromNodeId TmnxMplsTpNodeID,
vRtrMplsLspDestGlobalId TmnxMplsTpGlobalID,
vRtrMplsLspDestTunnelNum Unsigned32,
vRtrMplsLspFRPropAdminGroup TruthValue,
vRtrMplsLspIgpShortcutRelOffset Integer32,
vRtrMplsLspRevertTimer Unsigned32,
vRtrMplsLspRevertTimeRemain Unsigned32,
vRtrMplsLspLoadBalancingWeight Unsigned32,
vRtrMplsLspClassFwdingEnabled TruthValue,
vRtrMplsLspFC TmnxCBFClasses,
vRtrMplsLspBfdTemplateName TNamedItemOrEmpty,
vRtrMplsLspBfdEnable TruthValue,
vRtrMplsLspBfdPingIntvl Unsigned32,
vRtrMplsLspNgFromAddr InetAddress,
vRtrMplsLspNgToAddr InetAddress
}
vRtrMplsLspIndex OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspIndex specifies the Labeled Switch
Path (LSP) index for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same value of vRtrID."
::= { vRtrMplsLspEntry 1 }
vRtrMplsLspRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control
of vRtrMplsLspTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a valid value."
::= { vRtrMplsLspEntry 2 }
vRtrMplsLspLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsLspEntry 3 }
vRtrMplsLspName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative name for this Labeled Switch Path. The vRtrMplsLspName
must be unique within a virtual router instance.
When the value of the object vRtrMplsLspType is 'p2mpAuto', LSPs
are auto-created dynamically by the system using LSP template values
configured in the associated row entry of vRtrMplsLspTemplateTable.
For auto-created LSPs, vRtrMplsLspName can have a maximum of
64 characters which consists of vRtrMplsLspTemplateName, vRtrID
and MTTM(Multicast Tunnel Table Manager)Identifier.
If vRtrMplsLspType is not 'p2mpAuto', 'meshP2p' or 'oneHopP2p',
vRtrMplsLspName can have a maximum of 32 characters. "
::= { vRtrMplsLspEntry 4 }
vRtrMplsLspAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state for this LSP."
DEFVAL { outOfService }
::= { vRtrMplsLspEntry 5 }
vRtrMplsLspOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this LSP."
::= { vRtrMplsLspEntry 6 }
vRtrMplsLspFromAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The vRtrMplsLspFromAddr specifies the source address of this LSP.
When vRtrMplsLspFromAddrType is 'ipv4', vRtrMplsLspFromAddr should
also be specified.
If vRtrMplsLspFromAddr has not been explicitly set, the system IP
address will be used.
vRtrMplsLspFromAddr is obsoleted in 20.0, replaced by
vRtrMplsLspNgFromAddr"
::= { vRtrMplsLspEntry 7 }
vRtrMplsLspToAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The vRtrMplsLspToAddr specifies the destination address of this LSP.
When vRtrMplsLspToAddrType is 'ipv4', vRtrMplsLspToAddr should also be
specified.
When vRtrMplsLspToAddrType is 'ipv6', vRtrMplsLspNgToAddr should also
be specified.
vRtrMplsLspToAddr is obsoleted in 20.0, replaced by
vRtrMplsLspNgToAddr"
::= { vRtrMplsLspEntry 8 }
vRtrMplsLspType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
dynamic (2),
static (3),
bypassOnly (4),
p2mpLsp (5),
p2mpAuto (6),
mplsTp (7),
meshP2p (8),
oneHopP2p (9),
srTe (10),
meshP2pSrTe (11),
oneHopP2pSrTe (12),
pceInitP2pSrTe (13),
onDemandP2pSrTe (15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of object vRtrMplsLspType specifies whether the label value
is statically or dynamically assigned or whether the LSP will be used
exclusively for bypass protection. The value 'p2mpLsp' will be used to
indicate point to multipoint LSPs used for multicast traffic.
When the value of the vRtrMplsLspType is 'p2mpAuto', it specifies that
the LSP is auto-created dynamically by the system and the row entry
is dynamically created by the system using LSP Template values
configured in the associated row entry of vRtrMplsLspTemplateTable.
The value 'mplsTp' specifies that the LSP is an MPLS-TP Static LSP.
When the value of the vRtrMplsLspType is 'meshP2p', it specifies that
the LSP is a mesh point-to-point created dynamically by the system and
the row entry is dynamically created by the system using Mesh LSP
Template values configured in the associated row entry of
vRtrMplsLspTemplateTable.
When the value of the vRtrMplsLspType is 'oneHopP2p', it specifies
that the LSP is a one-hop point-to-point LSP created dynamically by
the system and the row entry is dynamically created by the system
using One-Hop LSP Template values configured in the associated row
entry of vRtrMplsLspTemplateTable.
When the value of vRtrMplsLspType is set to 'segmentRouting', it
specifies that the LSP is used for segment routing and vRtrMplsLspType
can only be set to 'segmentRouting' when the value of vRtrMplsLspIndex
is greater than 65535.
A 'wrongValue' error is returned if an attempt is made to set an
object in the row entry where the value of vRtrMplsLspType is
'p2mpAuto'.
When value of the vRtrMplsLspType is 'meshP2pSrTe', it specifies that
the segment routing LSP is a mesh point-to-point created dynamically
by the system and the row entry is dynamically created by the system
using meshP2PSrTe LSP Template values configured in the associated row
entry of vRtrMplsLspTemplateTable.
When the value of the vRtrMplsLspType is 'oneHopP2pSrTe', it specifies
that the LSP is a one-hop point-to-point segment routing LSP created
dynamically by the system and the row entry is dynamically created by
the system using onehopP2PSrTe LSP Template values configured in the
associated row entry of vRtrMplsLspTemplateTable.
When value of the vRtrMplsLspType is 'pceInitP2pSrTe', it specifies
that the point-to-point segment routing LSP is created dynamically on
receiving a PCE-Initiated Message from PCC, using pceInitP2pSrTe LSP
Template values configured in the associated row entry of
vRtrMplsLspTemplateTable.
When value of the vRtrMplsLspType is 'onDemandP2pSrTe', it specifies
that the LSP is a point-to-point created dynamically on receiving a
on-demand request from network policies, using onDemandP2pSrTe LSP
Template values configured in the associated row entry of
vRtrMplsLspTemplateTable."
DEFVAL { dynamic }
::= { vRtrMplsLspEntry 9 }
vRtrMplsLspOutSegIndx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vRtrMplsLspOutSegIndx is the index value of the entry in
the mplsOutSegmentTable associated with this vRtrMplsLspEntry
when vRtrMplsLspType is 'static'. If vRtrMplsLspType is
'dynamic', the value of this object will be zero (0)."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 10 }
vRtrMplsLspRetryTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspRetryTimer specifies the time in seconds the
software will wait before attempting the establish the failed LSP."
DEFVAL { 30 }
::= { vRtrMplsLspEntry 11 }
vRtrMplsLspRetryLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspRetryLimit specifies the number of
attempts the software should make to reestablish a failed LSP
before the LSP is disabled. A value of 0 indicates that an
infinite number of retry attempts should be made."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 12 }
vRtrMplsLspMetric OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP with the lowest
metric will be selected.
In LDP-over-RSVP, LDP performs a lookup in the Routing Table
Manager (RTM) which provides the next hop to the destination PE
and the advertising router (ABR or destination PE itself). If the
advertising router matches the targeted LDP peer, LDP then
performs a second lookup for the advertising router in the Tunnel
Table Manager (TTM). This lookup returns the best RSVP LSP to use
to forward packets for an LDP FEC learned through the targeted
LDP session. The lookup returns the LSP with the lowest metric.
If multiple LSPs have the same metric, then the result of the
lookup will be to select the first one available in the TTM.
A value of '0' indicates metric is not to be used."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 13 }
vRtrMplsLspDecrementTtl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When the value of vRtrMplsLspDecrementTtl is 'true', the ingress
ESR writes the TTL of the IP packet into the label and each
transit ESR decrements the TTL in the label. At the egress ESR
the TTL value from the label is written into the IP packet.
When the value of vRtrMplsLspDecrementTtl is 'false', the ingress ESR
ignores the IP packet TTL and writes the value of 255 into the label;
and the egress ESR does not write the label's TTL into the IP packet.
This object was made obsolete in release 11.0."
DEFVAL { true }
::= { vRtrMplsLspEntry 14 }
vRtrMplsLspCspf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When the value of vRtrMplsLspCspf is 'true', CSPF computation
for constrained-path LSP is enabled. When the value of
vRtrMplsLspCspf is 'false' CSPF computation is disabled."
DEFVAL { false }
::= { vRtrMplsLspEntry 15 }
vRtrMplsLspFastReroute OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrMplsLspFastReroute is 'true', fast reroute
is enabled. A pre-computed detour LSP is created from each node
in the primary path of this LSP. In case of a failure of a link
or LSP between two nodes, traffic is immediately rerouted on the
pre-computed detour LSP thus avoiding packet loss. Each node
along the primary path of the LSP tries to establish a detour LSP
as follows: Each upstream node will setup a detour LSP that
avoids only the immediate downstream node and merges back onto
the actual path of the LSP as soon as possible. The detour LSP
may take one or more hops (up to the value of vRtrMplsLspFRHopLimit)
before merging back onto the main LSP path.
When the upstream node detects a downstream link or node failure, it
immediately send traffic for that LSP on the detour path and at the
same time signals back to the ingress ESR about the failure.
Fast reroute applies only to the primary path of this LSP. No
configuration is required on the transit hops of the LSP. The ingress
ESR will signal all intermediate ESRs using RSVP to setup their
detours.
When the value of vRtrMplsLspFastReroute is 'false', fast rerouting is
disabled."
DEFVAL { false }
::= { vRtrMplsLspEntry 16 }
vRtrMplsLspFRHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspFRHopLimit specifies the total number of hops
a detour LSP can take before merging back onto the main LSP path."
DEFVAL { 16 }
::= { vRtrMplsLspEntry 17 }
vRtrMplsLspFRBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth
in megabits per second (Mbps) to be reserved for the detour LSP. A
value of zero (0) indicates that no bandwidth is reserved."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 18 }
vRtrMplsLspClassOfService OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified the mapping between the forwarding
class and the EXP bits. When class of service is specified,
all packets will be marked with the same EXP bits that match
the vRtrMplsLspClassOfService name in the mapping table.
An empty string, ''H, specifies no class of service. Packets
are assigned EXP bits based on the same mapping table, however
each packet is marked with EXP bits based on the forwarding
class from which it is serviced.
When the value of vRtrMplsLspPathCosSource is set to 'inherit', the
value of vRtrMplsLspClassOfService is applied to that specific
LSP/path.
This object was made obsolete in release 11.0."
DEFVAL { ''H }
::= { vRtrMplsLspEntry 19 }
vRtrMplsLspSetupPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSetupPriority specifies the setup priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority.
When the value of vRtrMplsLspPathSetupPriority is set to '-1', the
value of vRtrMplsLspSetupPriority is applied to that specific
LSP/path."
DEFVAL { 7 }
::= { vRtrMplsLspEntry 20 }
vRtrMplsLspHoldPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspHoldPriority specifies the hold priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority.
When the value of vRtrMplsLspPathHoldPriority is set to '-1', the
value of vRtrMplsLspHoldPriority is applied to that specific LSP/path."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 21 }
vRtrMplsLspRecord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrMplsLspRecord is 'true', recording of all the
hops that a LSP traverses is enabled.
When the value of vRtrMplsLspRecord is 'false, recording of all the
hops that a LSP traverses is disabled."
DEFVAL { true }
::= { vRtrMplsLspEntry 22 }
vRtrMplsLspPreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspPreference specifies the preference for
the LSP. This value is used for load balancing between multiple
LSPs that exist between the same ingress and egress routers.
By default, traffic is load balanced among the LSPs, since all
LSPs have the same preference. To prefer one LSP over another,
change the preference value for that LSP. The LSP with the
lowest preference is used.
This object was made obsolete in release 11.0."
DEFVAL { 255 }
::= { vRtrMplsLspEntry 23 }
vRtrMplsLspBandwidth OBJECT-TYPE
SYNTAX Integer32
UNITS "megabps"
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in
megabits per second (Mbps) to be reserved for the LSP. A value of zero
(0) indicates that no bandwidth is reserved.
When vRtrMplsLspPathBandwidth is set to -1, the value of
vRtrMplsLspBandwidth is applied to that specific LSP/path."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 24 }
vRtrMplsLspBwProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When vRtrMplsLspBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that multiple EF services will be
assigned to a single LSP. When bandwidth protection is
enabled on an LSP, each time this LSP is used for a certain
service the bandwidth allocated on that service is deducted
from the bandwidth reserved for the LSP. Once the bandwidth is
exhausted on the LSP, the ESR will provide feedback to the
provider indicating that this LSP has exhausted its resources.
This object was made obsolete in release 11.0."
DEFVAL { false }
::= { vRtrMplsLspEntry 25 }
vRtrMplsLspHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (2..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.
When the value of vRtrMplsLspPathHopLimit is set to zero (0), the
value of vRtrMplsLspHopLimit is applied to that specific LSP/path."
DEFVAL { 255 }
::= { vRtrMplsLspEntry 26 }
vRtrMplsLspNegotiatedMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspNegotiatedMTU specifies the size for the
Maximum transmission unit (MTU) that is negotiated during LSP
establishment."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 27 }
vRtrMplsLspRsvpResvStyle OBJECT-TYPE
SYNTAX INTEGER {
se (1),
ff (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspRsvpResvStyle specifies the reservation style
for RSVP. The reservation style can be set to 'Shared- Explicit' (se)
or 'Fixed-Filter' (ff)."
DEFVAL { se }
::= { vRtrMplsLspEntry 28 }
vRtrMplsLspRsvpAdspec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object
will be included in RSVP messages. When the value of
vRtrMplsLspRsvpAdspec is 'false', the ADSPEC object will not be
included in RSVP messages."
DEFVAL { false }
::= { vRtrMplsLspEntry 29 }
vRtrMplsLspFRMethod OBJECT-TYPE
SYNTAX INTEGER {
oneToOneBackup (1),
facilityBackup (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspFRMethod specifies the fast reroute method
used.
In the 'One-to-one Backup' method, a backup LSP is established which
will intersect the original LSP somewhere downstream of the point of
link or node failure. For each LSP that is backed up, a separate
backup LSP is established.
In the 'Facility Backup' method, instead of creating a separate LSP
for every LSP that is to be backed up, a single LSP is created which
serves as a backup for a set of LSPs. Such an LSP tunnel is called a
'bypass tunnel'."
DEFVAL { oneToOneBackup }
::= { vRtrMplsLspEntry 30 }
vRtrMplsLspFRNodeProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node
protection i.e. protection against the failure of a node on the LSP.
Setting the value to 'false' disables node protection."
DEFVAL { true }
::= { vRtrMplsLspEntry 31 }
vRtrMplsLspAdminGroupInclude OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies
a list of admin groups that should be included when this LSP is setup.
If bit 'n' is set, then the admin group with value 'n' is included for
this LSP. This implies that each link that this LSP goes through must
be associated with at least one of the admin groups in the include
list.
By default, all admin groups are in the include list."
DEFVAL { '00000000'H }
::= { vRtrMplsLspEntry 32 }
vRtrMplsLspAdminGroupExclude OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies
a list of admin groups that should be excluded when this LSP is setup.
If bit 'n' is set, then the admin group with value 'n' is excluded for
this LSP. This implies that each link that this LSP goes through must
not be associated with any of the admin groups in the exclude list.
By default, no admin groups are in the exclude list."
DEFVAL { '00000000'H }
::= { vRtrMplsLspEntry 33 }
vRtrMplsLspAdaptive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value of vRtrMplsLspAdaptive to 'true' enables
make-before-break functionality for the LSP. When the attributes of an
already established LSP are changed, either through manual
configuration or due to a change in network topology,
make-before-break functionality ensures that the resources of the
existing LSP will not be released until a new path (with the same LSP
Id) has been established and traffic flowing over the existing path is
seamlessly transferred to the new path.
Setting the value to 'false' disables make-before-break functionality."
DEFVAL { true }
::= { vRtrMplsLspEntry 34 }
vRtrMplsLspInheritance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspInheritance that controls whether to
inherit the operational value of the object or use the
administratively set value.
Non mask bits will always have value of zero.
This object is a bit-mask, with the following positions:
vRtrMplsLspOptimizeTimer 0x1
vRtrMplsLspFRObject 0x2
vRtrMplsLspHoldTimer 0x4
vRtrMplsLspDestGlobalId 0x8
When the bit for an object is set to one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value is.
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrMplsGeneralTable or vRtrMplsTpSystemTable."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 35 }
vRtrMplsLspOptimizeTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds,
the software will wait before attempting to re-optimize the LSP.
When CSPF is enabled, changes in the network topology may cause the
existing path of a loose-hop LSP to become sub-optimal. Such LSPs can
be re-optimized and rerouted through more optimal paths by
recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
When the vRtrMplsLspOptimizeTimer bit in vRtrMplsLspInheritance is
cleared (0), the value returned in the GET request is inherited from
vRtrMplsGeneralOptimizeTimer."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 36 }
vRtrMplsLspOperFastReroute OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspOperFastReroute indicates whether the
operational LSP has fast reroute enabled or disabled.
When make-before-break functionality for the LSP is enabled and if the
fast reroute setting is changed, the resources for the existing LSP
will not be released until a new path with the new attribute settings
has been established. While a new path is being signaled, the
administrative value and the operational values of fast reroute
setting for the LSP may differ. The value of vRtrMplsLspFastReroute
specifies the setting used for the new LSP path trying to be
established whereas the value of vRtrMplsLspOperFastReroute specifies
the setting for the existing LSP path."
::= { vRtrMplsLspEntry 37 }
vRtrMplsLspFRObject OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspFRObject specifies whether fast reroute, for
LSPs using 'Facility Backup', is signalled with or without the fast
reroute object. The value of vRtrMplsLspFRObject is ignored if fast
reroute is disabled for the LSP or if the LSP is using 'One-to-one
Backup'.
When the vRtrMplsLspFRObject bit in vRtrMplsLspInheritance is cleared
(0), the value returned in the GET request is inherited from
vRtrMplsGeneralFRObject."
DEFVAL { true }
::= { vRtrMplsLspEntry 38 }
vRtrMplsLspHoldTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for
which the ingress node holds a bit before programming its data plane
and declaring the lsp up to the service module.
The value of vRtrMplsLspHoldTimer is inherited from the value of
vRtrMplsGeneralHoldTimer."
DEFVAL { 1 }
::= { vRtrMplsLspEntry 39 }
vRtrMplsLspCspfTeMetricEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE
metric would be used for the purpose of the LSP path computation by
CSPF. When the value of this object is 'false', the IGP metric is used
to compute the path of the LSP by CSPF."
DEFVAL { false }
::= { vRtrMplsLspEntry 40 }
vRtrMplsLspP2mpId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspP2mpId specifies a unique identifier known as
point to multipoint (P2MP) identifier (ID)."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 41 }
vRtrMplsLspClassType OBJECT-TYPE
SYNTAX TmnxRsvpDSTEClassType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspClassType specifies the class type (CT)
associated with this LSP."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 42 }
vRtrMplsLspOperMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspOperMetric indicates the operational metric
for the LSP."
::= { vRtrMplsLspEntry 43 }
vRtrMplsLspLdpOverRsvpInclude OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspLdpOverRsvpInclude specifies that this LSP can
be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS)
will subsequently provide LDP with all ECMP IGP next-hops and tunnel
endpoints that it considers to be the lowest cost path to the
destination. If an IGP calculation and an LDP over RSVP produce the
same cost then LDP will always prefer an LDP over RSVP tunnel over an
IGP route.
By default, static and dynamic LSPs will be included when they are
created. The default value for p2mp and bypass-only LSPs will be
'false'."
DEFVAL { true }
::= { vRtrMplsLspEntry 44 }
vRtrMplsLspLeastFill OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspLeastFill specifies whether the use of the
least-fill path selection method for the computation of the path of
this LSP is enabled.
By default, the path of an LSP is randomly chosen among a set of equal
cost paths."
DEFVAL { false }
::= { vRtrMplsLspEntry 45 }
vRtrMplsLspVprnAutoBindInclude OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspVprnAutoBindInclude specifies whether the LSP
can be used as part of the auto-bind feature for VPRN services. By
default a LSP is available for inclusion to be used for the auto-bind
feature.
By default, static and dynamic LSPs will be included when they are
created. The default value for p2mp and bypass-only LSPs will
be 'false'."
DEFVAL { true }
::= { vRtrMplsLspEntry 46 }
vRtrMplsLspMainCTRetryLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspMainCTRetryLimit specifies the number of
attempts the software should make before it can start using the backup
class type."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 47 }
vRtrMplsLspIgpShortcut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspIgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving IGP
routes.
When the value of vRtrMplsLspIgpShortcut is set to 'true' the RSVP LSP
is used as a shortcut while resolving IGP routes. When the value of
vRtrMplsLspIgpShortcut is set to 'false' the RSVP LSP is not used as a
shortcut while resolving IGP routes.
When the value of vRtrMplsLspIgpShortcut is changed, the value of
vRtrMplsLspIgpShortcutLfaType is reset to its default value."
DEFVAL { true }
::= { vRtrMplsLspEntry 48 }
vRtrMplsLspOriginTemplate OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the value of the vRtrMplsLspType is 'p2mpAuto', the value of
vRtrMplsLspOriginTemplate indicates the LSP Template which was used to
create this LSP.
For all other types of LSPs, the value of vRtrMplsLspOriginTemplate is
an empty string."
::= { vRtrMplsLspEntry 49 }
vRtrMplsLspAutoBandwidth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the vRtrMplsLspAutoBandwidth specifies whether automatic
bandwidth adjustment has been enabled or disabled for this LSP.
A value of 'true' specifies that automatic bandwidth adjustment has
been enabled for this LSP and a value of 'false' specifies that
automatic bandwidth adjustment has been disabled for this LSP."
DEFVAL { false }
::= { vRtrMplsLspEntry 50 }
vRtrMplsLspCspfToFirstLoose OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of the vRtrMplsLspCspfToFirstLoose specifies whether the
CSPF calculation till the first loose hop on ingress Label Edge Router
(LER) is enabled or disabled for this Labeled Switched Path(LSP).
By default, the value of vRtrMplsLspCspfToFirstLoose is 'false' which
specifies that the CSPF calculation is done to the destination of LSP.
This object was deprecated in the 11.0 release."
DEFVAL { false }
::= { vRtrMplsLspEntry 51 }
vRtrMplsLspPropAdminGroup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the vRtrMplsLspPropAdminGroup specifies whether the
propagation of session attribute object with resource affinity (C-type
1) in PATH message is enabled.
By default, the value of vRtrMplsLspPropAdminGroup is 'false' which
specifies the session attribute object without resource affinity
(C-Type 7) is propagated in PATH message and the admin groups are
ignored on Label Switched Router(LSR) while doing CSPF calculation."
DEFVAL { false }
::= { vRtrMplsLspEntry 52 }
vRtrMplsLspBgpShortcut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspBgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving BGP
routes.
When the value of vRtrMplsLspBgpShortcut is set to 'true' the RSVP LSP
is used as a shortcut while resolving BGP routes. When the value of
vRtrMplsLspBgpShortcut is set to 'false' the RSVP LSP is not used as a
shortcut while resolving BGP routes."
DEFVAL { true }
::= { vRtrMplsLspEntry 53 }
vRtrMplsLspBgpTransportTunnel OBJECT-TYPE
SYNTAX TmnxMplsLspBgpRSVPLSPTunState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspBgpTransportTunnel specifies whether an RSVP
LSP is allowed or blocked in its usage as a transport LSP for BGP
tunnel routes.
When the value of vRtrMplsLspBgpTransportTunnel is set to 'include' an
RSVP LSP is allowed to be used as a transport LSP for BGP tunnel
routes. When the value of vRtrMplsLspBgpTransportTunnel is set to
'exclude' an RSVP LSP is not allowed to be used as a transport LSP for
BGP tunnel routes."
DEFVAL { include }
::= { vRtrMplsLspEntry 54 }
vRtrMplsLspSwitchStbyPath OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSwitchStbyPath specifies whether to trigger
the switch from the current active standby LSP path to a new LSP path
as specified by vRtrMplsLspSwitchStbyPathIndex.
When SET to the value of 'doAction', if the LSP path is actively on a
current standby path, signaling will be initiated to switch to the new
path.
If a signal is triggered while a resignaling is already in progress,
the old transient state will be destroyed and a new transaction will
be triggered.
This variable must be set along with vRtrMplsLspSwitchStbyPathIndex to
indicate the specific path index to switch to.
An SNMP GET request on this object should return 'notApplicable'."
::= { vRtrMplsLspEntry 55 }
vRtrMplsLspSwitchStbyPathIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSwitchStbyPathIndex specifies the index for
the new standby LSP path in mplsTunnelTable.
vRtrMplsLspSwitchStbyPath must also be set to 'doAction' for the new
standby LSP path to be selected.
A value of 0 specifies that the best active path will be selected."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 56 }
vRtrMplsLspSwitchStbyPathForce OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSwitchStbyPathForce specifies whether to force
a switch from an active LSP path to a new standby path as specified by
the values of vRtrMplsLspSwitchStbyPathIndex and
vRtrMplsLspSwitchStbyPath.
When vRtrMplsLspSwitchStbyPathForce variable is specified
vRtrMplsLspSwitchStbyPathIndex and vRtrMplsLspSwitchStbyPath must be
also be specified.
A value of 'true' for vRtrMplsLspSwitchStbyPathForce specifies
a forced switch. A value of 'false' specifies no forced switch."
DEFVAL { false }
::= { vRtrMplsLspEntry 57 }
vRtrMplsLspExcludeNodeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExcludeNodeAddrType specifies the type of
vRtrMplsLspExcludeNodeAddr."
::= { vRtrMplsLspEntry 58 }
vRtrMplsLspExcludeNodeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrMplsLspExcludeNodeAddr is set to non-zero value, XRO (Exclude
Routers) object will be included in bypass path message with supplied
IP address.
SET the value to 0.0.0.0 to disable."
::= { vRtrMplsLspEntry 59 }
vRtrMplsLspIgpShortcutLfaType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
lfaProtect (1),
lfaOnly (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspIgpShortcutLfaType specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes in LFA SPF or whether to exclude or include a
RSVP LSP from being used as a LFA SPF.
When the value of vRtrMplsLspIgpShortcutLfaType is set to 'lfaProtect'
the RSVP LSP is used as a shortcut while resolving IGP routes in LFA
SPF as well.
When the value of vRtrMplsLspIgpShortcutLfaType is set to 'lfaOnly'
the RSVP LSP is used as a LFA SPF and not used as igp shortcut in
regular SPF.
An 'inconsistentValue' error is returned if an attempt is made to set
this object to a non-default value when the value of the object
vRtrMplsLspIgpShortcut is not set to 'true'."
DEFVAL { none }
::= { vRtrMplsLspEntry 60 }
vRtrMplsLspToAddrType OBJECT-TYPE
SYNTAX TmnxMplsLspAddrType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vRtrMplsLspToAddrType object is an enumerated value that specifies
the destination address type of the LSP.
The value of 'ipv4' specifies an IPv4 address and vRtrMplsLspToAddr
should be configured.
The value of 'nodeId' specifies an MPLS-TP node id and
vRtrMplsLspToNodeId should be configured."
DEFVAL { unknown }
::= { vRtrMplsLspEntry 61 }
vRtrMplsLspFromAddrType OBJECT-TYPE
SYNTAX TmnxMplsLspAddrType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vRtrMplsLspFromAddrType object is an enumerated value that
specifies the source address type of the LSP.
When the value of vRtrMplsLspFromAddrType is 'ipv4', it specifies an
IPv4 address type and vRtrMplsLspFromAddr should be configured.
When the value of vRtrMplsLspFromAddrType is 'ipv6', it specifies an
IPv6 address type and vRtrMplsLspNgFromAddr should be configured.
When the value of vRtrMplsLspFromAddrType is 'nodeId', it specifies an
MPLS-TP node id type."
DEFVAL { unknown }
::= { vRtrMplsLspEntry 62 }
vRtrMplsLspToNodeId OBJECT-TYPE
SYNTAX TmnxMplsTpNodeID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspToNodeId specifies the destination node id of
an MPLS-TP Static LSP.
vRtrMplsLspToNodeId is configured when vRtrMplsLspToAddrType is set to
'nodeId'."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 63 }
vRtrMplsLspFromNodeId OBJECT-TYPE
SYNTAX TmnxMplsTpNodeID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspFromNodeId indicates the source node id of an
MPLS-TP Static LSP."
::= { vRtrMplsLspEntry 64 }
vRtrMplsLspDestGlobalId OBJECT-TYPE
SYNTAX TmnxMplsTpGlobalID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspDestGlobalId specifies the destination global
identifier for an MPLS-TP Static LSP.
When the vRtrMplsLspDestGlobalId bit in vRtrMplsLspInheritance is
cleared (0), the administrative and operational value for destination
global identifier is inherited from vRtrMplsTpGlobalId in the
vRtrMplsTpSystemTable."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 65 }
vRtrMplsLspDestTunnelNum OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..61440)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspDestTunnelNum specifies the destination tunnel
number of an MPLS-TP Static LSP.
A value of 0 indicates that vRtrMplsLspIndex is to be used as the
destination tunnel number."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 66 }
vRtrMplsLspFRPropAdminGroup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspFRPropAdminGroup specifies whether or not the
use of administrative group constraints on a FRR backup LSP is
enabled.
If vRtrMplsLspFastReroute is set to 'true', the value of
vRtrMplsLspFRPropAdminGroup specifies whether or not the
administrative group constraints are signaled in the
vRtrMplsLspFastReroute object.
If vRtrMplsLspFastReroute is set to 'false', the value of
vRtrMplsLspFRPropAdminGroup is ignored."
DEFVAL { false }
::= { vRtrMplsLspEntry 67 }
vRtrMplsLspIgpShortcutRelOffset OBJECT-TYPE
SYNTAX Integer32 (-10..10 | 2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspIgpShortcutRelOffset specifies the the
relative offset to the IGP metric on the SPF tree.
The SPF tree is updated with the current IGP metric of the path
between the endpoints of the LSP minus the value of
vRtrMplsLspIgpShortcutRelOffset.
The default value of 2147483647 indicates the relative metric offset
is not to be considered."
DEFVAL { 2147483647 }
::= { vRtrMplsLspEntry 68 }
vRtrMplsLspRevertTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4320)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspRevertTimer specifies a revert timer for a
Labeled Switch Path (LSP).
When the value of vRtrMplsLspRevertTimer is set to '0', it cancels any
revert timer that is currently running and causes the Labeled Switch
Path (LSP) to revert to the primary path immediately if it is up.
When the value of vRtrMplsLspRevertTimer is set to any non-zero value
of revert interval, the Labeled Switch Path (LSP) will be switched to
the primary path only after the revert interval is over."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 69 }
vRtrMplsLspRevertTimeRemain OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspRevertTimeRemain indicates the time remaining
in minutes before the revert timer would expire causing an lsp revert
to primary path."
::= { vRtrMplsLspEntry 70 }
vRtrMplsLspLoadBalancingWeight OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspLoadBalancingWeight specifies the load
balancing weight applied to this Labeled Switch Path(LSP). When a
system level load-balancing command is enabled, packets forwarded to a
set of ECMP tunnel next-hops will be sprayed using this weight
configured for this LSP."
DEFVAL { 0 }
::= { vRtrMplsLspEntry 71 }
vRtrMplsLspClassFwdingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspClassFwdingEnabled specifies whether class
based forwarding over this MPLS LSP is enabled or not."
DEFVAL { false }
::= { vRtrMplsLspEntry 72 }
vRtrMplsLspFC OBJECT-TYPE
SYNTAX TmnxCBFClasses
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspFC specifies a set of forwarding classes
configured for this LSP expressed as a bit map. If a bit from 0
through 7 is set, then the corresponding forwarding class has been
configured for this LSP. If bit 8 is set, the LSP has been designated
as the default forwarding LSP."
DEFVAL { {} }
::= { vRtrMplsLspEntry 73 }
vRtrMplsLspBfdTemplateName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP."
::= { vRtrMplsLspEntry 74 }
vRtrMplsLspBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspBfdEnable specifies whether BFD is enabled or
not for this LSP."
DEFVAL { false }
::= { vRtrMplsLspEntry 75 }
vRtrMplsLspBfdPingIntvl OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspBfdPingIntvl specifies the time interval for
periodic LSP ping for BFD bootstrapping.
The object vRtrMplsLspBfdPingIntvl is applicable to LSPs with
vRtrMplsLspType set to 'dynamic'.
When the value of vRtrMplsLspBfdPingIntvl is set to '0', it disables
LSP pings for BFD bootstrapping."
DEFVAL { 60 }
::= { vRtrMplsLspEntry 76 }
vRtrMplsLspNgFromAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspNgFromAddr specifices the source address of
this LSP."
::= { vRtrMplsLspEntry 77 }
vRtrMplsLspNgToAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspNgToAddr specifices the destination address of
this LSP."
::= { vRtrMplsLspEntry 78 }
vRtrMplsLspStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspStatTable has an entry for each Labeled Switch Path
(LSP) configured for a virtual router in the system."
::= { tmnxMplsObjs 2 }
vRtrMplsLspStatEntry OBJECT-TYPE
SYNTAX VRtrMplsLspStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for a Labeled
Switch Path (LSP) configured for a virtual router in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsLspEntry }
::= { vRtrMplsLspStatTable 1 }
VRtrMplsLspStatEntry ::= SEQUENCE
{
vRtrMplsLspOctets Counter64,
vRtrMplsLspPackets Counter64,
vRtrMplsLspAge TmnxTimeInterval,
vRtrMplsLspTimeUp TmnxTimeInterval,
vRtrMplsLspTimeDown TmnxTimeInterval,
vRtrMplsLspPrimaryTimeUp TmnxTimeInterval,
vRtrMplsLspTransitions Counter32,
vRtrMplsLspLastTransition TmnxTimeInterval,
vRtrMplsLspPathChanges Counter32,
vRtrMplsLspLastPathChange TmnxTimeInterval,
vRtrMplsLspConfiguredPaths Integer32,
vRtrMplsLspStandbyPaths Integer32,
vRtrMplsLspOperationalPaths Integer32,
vRtrMplsLspConfP2mpInstances Gauge32,
vRtrMplsLspStatsEgrIndexUnAvail TruthValue,
vRtrMplsLspSelfPingTimeouts Counter32,
vRtrMplsLspSelfPingOamNoRsc Counter32
}
vRtrMplsLspOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of octets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interval, which by default is
once every 5 minutes. If MPLS statistics gathering is not
enabled, this number will not increment."
::= { vRtrMplsLspStatEntry 1 }
vRtrMplsLspPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of packets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interval, which by default is
once every 5 minutes. If MPLS statistics gathering is not
enabled, this number will not increment."
::= { vRtrMplsLspStatEntry 2 }
vRtrMplsLspAge OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age (i.e., time from creation till now) of this LSP in
10-millisecond periods."
::= { vRtrMplsLspStatEntry 3 }
vRtrMplsLspTimeUp OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this LSP has been
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %)."
::= { vRtrMplsLspStatEntry 4 }
vRtrMplsLspTimeDown OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this LSP has not been
operational."
::= { vRtrMplsLspStatEntry 5 }
vRtrMplsLspPrimaryTimeUp OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this LSP's primary
path has been operational. For example, the percentage
contribution of the primary path to the operational time is
given by (vRtrMplsLspPrimaryTimeUp/vRtrMplsLspTimeUp * 100) %."
::= { vRtrMplsLspStatEntry 6 }
vRtrMplsLspTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions (up -> down and down -> up) this LSP
has undergone."
::= { vRtrMplsLspStatEntry 7 }
vRtrMplsLspLastTransition OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in 10-millisecond units since the last transition occurred on
this LSP."
::= { vRtrMplsLspStatEntry 8 }
vRtrMplsLspPathChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of path changes this LSP has had. For every path change
(path down, path up, path change), a corresponding syslog/trap (if
enabled) is generated for it."
::= { vRtrMplsLspStatEntry 9 }
vRtrMplsLspLastPathChange OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in 10-millisecond units since the last change occurred on
this LSP."
::= { vRtrMplsLspStatEntry 10 }
vRtrMplsLspConfiguredPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of paths configured for this LSP."
::= { vRtrMplsLspStatEntry 11 }
vRtrMplsLspStandbyPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of standby paths configured for this LSP."
::= { vRtrMplsLspStatEntry 12 }
vRtrMplsLspOperationalPaths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of operational paths for this LSP. This includes the path
currently active, as well as operational standby paths."
::= { vRtrMplsLspStatEntry 13 }
vRtrMplsLspConfP2mpInstances OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspConfP2mpInstances indicates the number of p2mp
instances configured for this LSP."
::= { vRtrMplsLspStatEntry 14 }
vRtrMplsLspStatsEgrIndexUnAvail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsEgrIndexUnAvail indicates whether an MPLS
LSP egress statistics index is available or not for the egress
statistics."
::= { vRtrMplsLspStatEntry 15 }
vRtrMplsLspSelfPingTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSelfPingTimeouts indicate the number of times
self-ping has timed out for paths in this LSP."
::= { vRtrMplsLspStatEntry 16 }
vRtrMplsLspSelfPingOamNoRsc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSelfPingOamNoRsc indicates the number of times
self-ping failed due to oam resource limitations for this LSP."
::= { vRtrMplsLspStatEntry 17 }
vRtrMplsLspPathTableSpinlock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"voluntary serialization control for vRtrMplsLspPathTable. Primarily
used by SNMP manager to coordinate changes to
vRtrMplsLspPathInheritance."
DEFVAL { 0 }
::= { tmnxMplsObjs 3 }
vRtrMplsLspPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspPathTable provides an association between an
LSP and a path. An LSP can have more than one path association,
but only one of those paths can be specified as the primary
path type. Paths are defined in as Tunnel entries in the
mplsTunnelTable in the MPLS-TE-MIB."
::= { tmnxMplsObjs 4 }
vRtrMplsLspPathEntry OBJECT-TYPE
SYNTAX VRtrMplsLspPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an association between a Labeled Switch
Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in
the mplsTunnelTable. Entries in this table can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspPathType to have been assigned a valid value."
INDEX {
vRtrID,
vRtrMplsLspIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId
}
::= { vRtrMplsLspPathTable 1 }
VRtrMplsLspPathEntry ::= SEQUENCE
{
vRtrMplsLspPathRowStatus RowStatus,
vRtrMplsLspPathLastChange TimeStamp,
vRtrMplsLspPathType INTEGER,
vRtrMplsLspPathCos Integer32,
vRtrMplsLspPathProperties BITS,
vRtrMplsLspPathBandwidth Integer32,
vRtrMplsLspPathBwProtect TruthValue,
vRtrMplsLspPathState INTEGER,
vRtrMplsLspPathPreference Integer32,
vRtrMplsLspPathCosSource TruthValue,
vRtrMplsLspPathClassOfService TNamedItemOrEmpty,
vRtrMplsLspPathSetupPriority Unsigned32,
vRtrMplsLspPathHoldPriority Unsigned32,
vRtrMplsLspPathRecord INTEGER,
vRtrMplsLspPathHopLimit Unsigned32,
vRtrMplsLspPathSharing TruthValue,
vRtrMplsLspPathAdminState TmnxAdminState,
vRtrMplsLspPathOperState TmnxOperState,
vRtrMplsLspPathInheritance Unsigned32,
vRtrMplsLspPathLspId MplsLSPID,
vRtrMplsLspPathRetryTimeRemaining Unsigned32,
vRtrMplsLspPathTunnelARHopListIndex Integer32,
vRtrMplsLspPathNegotiatedMTU Unsigned32,
vRtrMplsLspPathFailCode TmnxMplsLspFailCode,
vRtrMplsLspPathFailNodeAddr IpAddress,
vRtrMplsLspPathAdminGroupInclude Unsigned32,
vRtrMplsLspPathAdminGroupExclude Unsigned32,
vRtrMplsLspPathAdaptive TruthValue,
vRtrMplsLspPathOptimizeTimer Unsigned32,
vRtrMplsLspPathNextOptimize Unsigned32,
vRtrMplsLspPathOperBandwidth Integer32,
vRtrMplsLspPathMBBState INTEGER,
vRtrMplsLspPathResignal TmnxActionType,
vRtrMplsLspPathTunnelCRHopListIndex Integer32,
vRtrMplsLspPathOperMTU Unsigned32,
vRtrMplsLspPathRecordLabel INTEGER,
vRtrMplsLspPathSrlg TruthValue,
vRtrMplsLspPathSrlgDisjoint TruthValue,
vRtrMplsLspPathLastResigAttempt TimeStamp,
vRtrMplsLspPathMetric Unsigned32,
vRtrMplsLspPathLastMBBType TmnxMplsMBBType,
vRtrMplsLspPathLastMBBEnd TimeStamp,
vRtrMplsLspPathLastMBBMetric Unsigned32,
vRtrMplsLspPathLastMBBState INTEGER,
vRtrMplsLspPathMBBTypeInProg TmnxMplsMBBType,
vRtrMplsLspPathMBBStarted TimeStamp,
vRtrMplsLspPathMBBNextRetry Unsigned32,
vRtrMplsLspPathMBBRetryAttempts Unsigned32,
vRtrMplsLspPathMBBFailCode TmnxMplsLspFailCode,
vRtrMplsLspPathMBBFailNodeArType InetAddressType,
vRtrMplsLspPathMBBFailNodeAddr InetAddress,
vRtrMplsLspPathClassType TmnxRsvpDSTEClassType,
vRtrMplsLspPathOperMetric Unsigned32,
vRtrMplsLspPathResignalEligible TruthValue,
vRtrMplsLspPathIsFastRetry TruthValue,
vRtrMplsLspPathBackupCT Integer32,
vRtrMplsLspPathMainCTRetryRem Unsigned32,
vRtrMplsLspPathOperCT Integer32,
vRtrMplsLspPathNewPathIndex MplsTunnelIndex,
vRtrMplsLspPathMBBMainCTRetryRem Unsigned32,
vRtrMplsLspPathSigBWMBBInProg Unsigned32,
vRtrMplsLspPathSigBWLastMBB Unsigned32,
vRtrMplsLspPathActiveByManual INTEGER,
vRtrMplsLspPathTimeoutIn Unsigned32,
vRtrMplsLspPathMBBTimeoutIn Unsigned32,
vRtrMplsLspPathBfdTemplateName TNamedItemOrEmpty,
vRtrMplsLspPathBfdEnable TruthValue,
vRtrMplsLspPathBfdPingIntvl Unsigned32,
vRtrMplsLspPathLastUpdateTime TimeStamp,
vRtrMplsLspPathLastUpdateId Unsigned32,
vRtrMplsLspPathLastUpdateState INTEGER,
vRtrMplsLspPathLastUpdFailCode TmnxMplsLspFailCode,
vRtrMplsLspPathBfdUpWaitTimer Unsigned32,
vRtrMplsLspPathBfdUpWaitTmLeft Unsigned32,
vRtrMplsLspPathBfdState INTEGER,
vRtrMplsLspPathBfdStartFailRsn DisplayString,
vRtrMplsLspPathBfdOperUpWaitTmr Unsigned32,
vRtrMplsLspPathSelfPingOprState TmnxOperState,
vRtrMplsLspPathLastMBBFailCode TmnxMplsLspFailCode,
vRtrMplsLspPathDegraded TruthValue,
vRtrMplsLspPathDegradedReason BITS,
vRtrMplsLspPathReturnPathLabel Unsigned32
}
vRtrMplsLspPathRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control
of vRtrMplsLspPathTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspPathType must
have been assigned a valid value."
::= { vRtrMplsLspPathEntry 1 }
vRtrMplsLspPathLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsLspPathEntry 2 }
vRtrMplsLspPathType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
primary (2),
standby (3),
secondary (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is an enum that represents the role this path is taking
within this LSP."
::= { vRtrMplsLspPathEntry 3 }
vRtrMplsLspPathCos OBJECT-TYPE
SYNTAX Integer32 (0..7 | 255)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The configured Class Of Service (COS) for this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the label.
If the value is 255, the value in the COS field of
the label will depend on other factors.
This object was made obsolete in release 11.0."
DEFVAL { 255 }
::= { vRtrMplsLspPathEntry 4 }
vRtrMplsLspPathProperties OBJECT-TYPE
SYNTAX BITS {
record-route (0),
adaptive (1),
cspf (2),
mergeable (3),
fast-reroute (4),
pce-reported (5),
pce-controlled (6),
pce-computed (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of configured properties for this path expressed
as a bit map. For example, if the path is an adaptive
path, the bit corresponding to bit value 1 is set."
::= { vRtrMplsLspPathEntry 5 }
vRtrMplsLspPathBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..6400000)
UNITS "megabps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBandwidth specifies the amount
of bandwidth in megabits per seconds (Mbps) to be reserved
for this LSP path. A value of zero (0) indicates that no
bandwidth is reserved."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 6 }
vRtrMplsLspPathBwProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that multiple EF services will be
assigned to a single LSP. When bandwidth protection is
enabled on an LSP, each time this LSP is used for a certain
service the bandwidth allocated on that service is deducted
from the bandwidth reserved for the LSP. Once the bandwidth is
exhausted on the LSP, the ESR will provide feedback to the
provider indicating that this LSP has exhausted its resources.
This object was made obsolete in release 11.0."
DEFVAL { false }
::= { vRtrMplsLspPathEntry 7 }
vRtrMplsLspPathState OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
active (2),
inactive (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current working state of this path within this LSP."
DEFVAL { unknown }
::= { vRtrMplsLspPathEntry 8 }
vRtrMplsLspPathPreference OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When there is no path in the LSP with vRtrMplsLspPathType
value of 'primary', 'secondary' type paths of this LSP
with the same value of vRtrMplsLspPathPreference are used
for load sharing. When a 'primary' type path exists in
the LSP, vRtrMplsLspPathPreference is used to denote at
which priority one 'secondary' path will supersede another
when the 'primary' fails. 1 indicates the highest priority
value.
For LSP with vRtrMplsLspPathType value of 'standby' type paths the
value of vRtrMplsLspPathPreference is in the range of (1..255). For
path type 'primary' the value of vRtrMplsLspPathPreference is set to
0. For path type 'secondary' the value of vRtrMplsLspPathPreference is
set to 255."
DEFVAL { 255 }
::= { vRtrMplsLspPathEntry 9 }
vRtrMplsLspPathCosSource OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When vRtrMplsLspPathCosSource is set to 'true', the value of
vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService.
When 'false', the value of vRtrMplsLspClassOfService is used.
This object was made obsolete in release 11.0."
DEFVAL { false }
::= { vRtrMplsLspPathEntry 10 }
vRtrMplsLspPathClassOfService OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspPathClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified the mapping between the forwarding
class and the EXP bits. When class of service is specified,
all packets will be marked with the same EXP bits that match
the vRtrMplsLspPathClassOfService name in the mapping table.
An empty string, ''H, specifies no class of service. Packets
are assigned EXP bits based on the same mapping table, however
each packet is marked with EXP bits based on the forwarding
class from which it is serviced.
This object was made obsolete in release 11.0."
DEFVAL { ''H }
::= { vRtrMplsLspPathEntry 11 }
vRtrMplsLspPathSetupPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority."
DEFVAL { 7 }
::= { vRtrMplsLspPathEntry 12 }
vRtrMplsLspPathHoldPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 13 }
vRtrMplsLspPathRecord OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrMplsLspPathRecord is 'record', recording of all
the hops that a LSP traverses is enabled.
When the value of vRtrMplsLspPathRecord is 'noRecord', recording of
all the hops that a LSP traverses is disabled."
DEFVAL { record }
::= { vRtrMplsLspPathEntry 14 }
vRtrMplsLspPathHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (2..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.
When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance is
cleared (0), the value returned to a GET request is inherited from
vRtrMplsLspHopLimit."
DEFVAL { 255 }
::= { vRtrMplsLspPathEntry 15 }
vRtrMplsLspPathSharing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When vRtrMplsLspPathSharing has a value of 'true', path-sharing
is enabled for the secondary path. Path-sharing is used to
control the hops of the secondary path.
When vRtrMplsLspPathSharing have a value of 'false', CSPF attempts to
find a path for the secondary that does not include any node or link
that is common to the active primary path.
This variable is valid only if vRtrMplsLspPathType is set to
'secondary'.
This object was made obsolete in release 11.0."
DEFVAL { false }
::= { vRtrMplsLspPathEntry 16 }
vRtrMplsLspPathAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state for this LSP path."
DEFVAL { inService }
::= { vRtrMplsLspPathEntry 17 }
vRtrMplsLspPathOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this LSP path."
::= { vRtrMplsLspPathEntry 18 }
vRtrMplsLspPathInheritance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For each writable object in this row that can be configured to inherit
its value from its corresponding object in the vRtrMplsLspTable,
controls whether to inherit the operational value of that object, or
use the administratively set value.
Non mask bits will always have value of zero, and any attempt to
change the value will be silently discarded.
This object is a bit-mask, with the following positions:
vRtrMplsLspPathHopLimit 0x2000
vRtrMplsLspPathAdminGroupInclude 0x20000
vRtrMplsLspPathAdminGroupExclude 0x40000
vRtrMplsLspPathAdaptive 0x80000
vRtrMplsLspPathOptimizeTimer 0x100000
vRtrMplsLspPathClassType 0x1000000
When the bit for an object is set to one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value is. The corresponding mask bit will be changed to
one when SNMP SET is performed on any of the inherited objects
(vRtrMplsLspPathHopLimit, vRtrMplsLspPathAdminGroupInclude, etc).
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrMplsLspTable."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 19 }
vRtrMplsLspPathLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value identifies the label switched path that is signaled for
this entry."
::= { vRtrMplsLspPathEntry 20 }
vRtrMplsLspPathRetryTimeRemaining OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in 10-millisecond units to signal this path."
::= { vRtrMplsLspPathEntry 21 }
vRtrMplsLspPathTunnelARHopListIndex OBJECT-TYPE
SYNTAX Integer32 (0 | 1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary index into the mplsTunnelARHopTable identifying a particular
recorded hop list. A value of 0 implies that there is no recorded hop
list associated with this LSP path."
::= { vRtrMplsLspPathEntry 22 }
vRtrMplsLspPathNegotiatedMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this LSP Path."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 23 }
vRtrMplsLspPathFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathFailCode indicates the reason code for LSP
Path failure. A value of 0 indicates that no failure has occurred."
::= { vRtrMplsLspPathEntry 24 }
vRtrMplsLspPathFailNodeAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathFailNodeAddr indicates the IP address of
the node in the LSP path at which the LSP path failed. When no failure
has occurred, this value is 0."
::= { vRtrMplsLspPathEntry 25 }
vRtrMplsLspPathAdminGroupInclude OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when this LSP
path is setup. If bit 'n' is set, then the admin group with value 'n'
is included for this LSP path. This implies that each link that this
LSP path goes through must be associated with at least one of the
admin groups in the include list.
When the vRtrMplsLspPathAdminGroupInclude bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET
request is inherited from vRtrMplsLspAdminGroupInclude."
DEFVAL { '00000000'H }
::= { vRtrMplsLspPathEntry 26 }
vRtrMplsLspPathAdminGroupExclude OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when this LSP
path is setup. If bit 'n' is set, then the admin group with value 'n'
is excluded for this LSP path. This implies that each link that this
LSP path goes through must not be associated with any of the admin
groups in the exclude list.
When the vRtrMplsLspPathAdminGroupExclude bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET
request is inherited from vRtrMplsLspAdminGroupExclude."
DEFVAL { '00000000'H }
::= { vRtrMplsLspPathEntry 27 }
vRtrMplsLspPathAdaptive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value of vRtrMplsLspPathAdaptive to 'true', enables
make-before-break functionality for the LSP path.
Setting the value to 'false', disables make-before-break functionality
for the path.
When the vRtrMplsLspPathAdaptive bit in vRtrMplsLspPathInheritance is
cleared (0), the value returned to a GET request is inherited from
vRtrMplsLspAdaptive."
DEFVAL { true }
::= { vRtrMplsLspPathEntry 28 }
vRtrMplsLspPathOptimizeTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize the
LSP path.
When CSPF is enabled, changes in the network topology may cause the
existing path of a loose-hop LSP to become sub-optimal. Such LSPs can
be re-optimized and rerouted through more optimal paths by
recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
When the vRtrMplsLspPathOptimizeTimer bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned in the
GET request is inherited from vRtrMplsLspOptimizeTimer."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 29 }
vRtrMplsLspPathNextOptimize OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathNextOptimize indicates the current value
of the optimize timer. This is the time, in seconds, remaining till
the optimize timer will expire and optimization will be started for
the LSP path."
::= { vRtrMplsLspPathEntry 30 }
vRtrMplsLspPathOperBandwidth OBJECT-TYPE
SYNTAX Integer32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational LSP path.
When make-before-break functionality for the LSP is enabled and if the
path bandwidth is changed, the resources allocated to the existing LSP
paths will not be released until a new path with the new bandwidth
settings has been established. While a new path is being signaled, the
administrative value and the operational values of the path bandwidth
may differ. The value of vRtrMplsLspPathBandwidth specifies the
bandwidth requirements for the new LSP path trying to be established
whereas the value of vRtrMplsLspPathOperBandwidth specifies the
bandwidth reserved for the existing LSP path."
::= { vRtrMplsLspPathEntry 31 }
vRtrMplsLspPathMBBState OBJECT-TYPE
SYNTAX INTEGER {
none (1),
success (2),
inProgress (3),
fail (4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspPathMBBState indicates the state of the most
recent invocation of the make-before-break functionality.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break successful
inProgress (3) - make-before-break in progress
fail (4) - make-before-break failed.
This object was made obsolete in release 6.0 R4 and replaced with
vRtrMplsLspPathLastMBBState."
::= { vRtrMplsLspPathEntry 32 }
vRtrMplsLspPathResignal OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers
the resignaling of the LSP path.
If the LSP path is operationally down either due to network failure or
due to the retry attempts count being exceeded, setting this variable
to 'doAction' will initiate the signaling for the path. A
make-before-break signaling for the path will be initiated if the LSP
is operationally up but the make-before-break retry attempts count was
exceeded. Make-before-break signaling will also be initiated for any
LSP that is operationally up. This may be used to cause a loose-hop
LSP to be optimized.
If a resignal is triggered while a resignaling is already in progress,
the old transient state will be destroyed and a new transaction being
triggered.
An SNMP GET request on this object should return 'notApplicable'."
::= { vRtrMplsLspPathEntry 33 }
vRtrMplsLspPathTunnelCRHopListIndex OBJECT-TYPE
SYNTAX Integer32 (0 | 1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary index into the vRtrMplsTunnelCHopTable identifying a
particular computed hop list. A value of 0 implies that there is no
computed hop list associated with this LSP path."
::= { vRtrMplsLspPathEntry 34 }
vRtrMplsLspPathOperMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperMTU indicates the size for the Maximum
transmission unit (MTU) that is currently operation for this LSP Path."
::= { vRtrMplsLspPathEntry 35 }
vRtrMplsLspPathRecordLabel OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrMplsLspPathRecordLabel is 'record', recording of
labels at each node that a LSP traverses is enabled.
When the value of vRtrMplsLspPathRecordLabel is 'noRecord', recording
of labels at each node that a LSP traverses is disabled."
DEFVAL { record }
::= { vRtrMplsLspPathEntry 36 }
vRtrMplsLspPathSrlg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathSrlg specifies whether the use of SRLG
constraint in the computation of a secondary path for an LSP at the
head-end Label Edge Router (LER) is enabled.
The value vRtrMplsLspPathSrlg is used only when the value of
vRtrMplsLspPathType is 'secondary'. When the value of
vRtrMplsLspPathSrlg is true, the use of SRLG constraint in the
computation of a secondary path is enabled."
DEFVAL { false }
::= { vRtrMplsLspPathEntry 37 }
vRtrMplsLspPathSrlgDisjoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathSrlgDisjoint indicates whether the
relevant standby lsp path is SRLG disjoint from the associated primary
lsp path for an LSP at the head-end Label Edge Router (LER).
The value vRtrMplsLspPathSrlgDisjoint is used only when the
value of vRtrMplsLspPathType is 'standby'. When the value of
vRtrMplsLspPathSrlgDisjoint is 'true', primary and standby lsp
path do not have SRLG membership in common. When the value of
vRtrMplsLspPathSrlgDisjoint is 'false', primary and standby lsp
path have SRLG membership in common."
::= { vRtrMplsLspPathEntry 38 }
vRtrMplsLspPathLastResigAttempt OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastResigAttempt indicates the sysUpTime
when the last attempt to resignal this LSP was made."
::= { vRtrMplsLspPathEntry 39 }
vRtrMplsLspPathMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMetric indicates the cost of the traffic
engineered path returned by the IGP."
::= { vRtrMplsLspPathEntry 40 }
vRtrMplsLspPathLastMBBType OBJECT-TYPE
SYNTAX TmnxMplsMBBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted."
::= { vRtrMplsLspPathEntry 41 }
vRtrMplsLspPathLastMBBEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastMBBEnd indicates the sysUpTime when
the last MBB ended."
::= { vRtrMplsLspPathEntry 42 }
vRtrMplsLspPathLastMBBMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastMBBMetric indicates the
cost of the traffic engineered path for the LSP path prior to MBB."
::= { vRtrMplsLspPathEntry 43 }
vRtrMplsLspPathLastMBBState OBJECT-TYPE
SYNTAX INTEGER {
none (1),
success (2),
fail (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break successful
fail (3) - make-before-break failed."
::= { vRtrMplsLspPathEntry 44 }
vRtrMplsLspPathMBBTypeInProg OBJECT-TYPE
SYNTAX TmnxMplsMBBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress."
::= { vRtrMplsLspPathEntry 45 }
vRtrMplsLspPathMBBStarted OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBStarted indicates the sysUpTime when
the in-progress MBB started."
::= { vRtrMplsLspPathEntry 46 }
vRtrMplsLspPathMBBNextRetry OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB."
::= { vRtrMplsLspPathEntry 47 }
vRtrMplsLspPathMBBRetryAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBRetryAttempts indicates 'n' where nth
attempt for the MBB is in progress."
::= { vRtrMplsLspPathEntry 48 }
vRtrMplsLspPathMBBFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred."
::= { vRtrMplsLspPathEntry 49 }
vRtrMplsLspPathMBBFailNodeArType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBFailNodeArType indicates the type of
vRtrMplsLspPathMBBFailNodeAddr. A value of 'unknown' indicates that no
failure has occurred."
::= { vRtrMplsLspPathEntry 50 }
vRtrMplsLspPathMBBFailNodeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBFailNodeAddr indicates the IP address
of the node in the LSP path at which the in-progress MBB failed. A
value of 'unknown' for vRtrMplsLspPathMBBFailNodeArType and empty
string for vRtrMplsLspPathMBBFailNodeAddr indicates that no failure
has occurred."
::= { vRtrMplsLspPathEntry 51 }
vRtrMplsLspPathClassType OBJECT-TYPE
SYNTAX TmnxRsvpDSTEClassType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathClassType specifies the class type (CT)
associated with this LSP path. When the vRtrMplsLspPathClassType
bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to
a GET request is inherited from vRtrMplsLspClassType."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 52 }
vRtrMplsLspPathOperMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperMetric indicates the operational
metric for the LSP path."
::= { vRtrMplsLspPathEntry 53 }
vRtrMplsLspPathResignalEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathResignalEligible indicates that the LSP
path is eligible for resignaling on the basis of available bandwidth."
::= { vRtrMplsLspPathEntry 54 }
vRtrMplsLspPathIsFastRetry OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathIsFastRetry indicates which retry timer is
being referred to by vRtrMplsLspPathRetryTimeRemaining.
When the value of vRtrMplsLspPathIsFastRetry is set to 'true',
vRtrMplsLspPathRetryTimeRemaining is referring to either the P2P
active path fast timer, vRtrMplsGenP2pActPathFastRetry or the
secondary fast retry timer, vRtrMplsGeneralSecFastRetryTimer.
When the value of vRtrMplsLspPathIsFastRetry is set to 'false',
vRtrMplsLspPathRetryTimeRemaining is referring to the LSP retry timer,
vRtrMplsLspRetryTimer."
::= { vRtrMplsLspPathEntry 55 }
vRtrMplsLspPathBackupCT OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBackupCT specifies the backup class type
(CT) associated with the LSP. A value of -1 indicates that no backup
class type has been configured for the LSP."
DEFVAL { -1 }
::= { vRtrMplsLspPathEntry 56 }
vRtrMplsLspPathMainCTRetryRem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMainCTRetryRem indicates the number of
remaining attempts the software should make before it can start using
the backup class type for the LSP."
::= { vRtrMplsLspPathEntry 57 }
vRtrMplsLspPathOperCT OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperCT indicates operational class type
(CT) associated with the LSP. A value of -1 indicates that no
operational class type has been configured for the LSP"
::= { vRtrMplsLspPathEntry 58 }
vRtrMplsLspPathNewPathIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathNewPathIndex specifies the index for the
new path in mplsTunnelTable."
DEFVAL { 0 }
::= { vRtrMplsLspPathEntry 59 }
vRtrMplsLspPathMBBMainCTRetryRem OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBMainCTRetryRem indicates the number of
remaining attempts the software should make before it can start using
the backup class type for the LSP."
::= { vRtrMplsLspPathEntry 60 }
vRtrMplsLspPathSigBWMBBInProg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathSigBWMBBInProg indicates the bandwidth
used to signal the MBB currently in progress."
::= { vRtrMplsLspPathEntry 61 }
vRtrMplsLspPathSigBWLastMBB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathSigBWLastMBB indicates the bandwidth used
to signal the last MBB that occurred."
::= { vRtrMplsLspPathEntry 62 }
vRtrMplsLspPathActiveByManual OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
noForce (1),
force (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathActiveByManual indicates whether
a secondary standby path has become the active LSP path
due to manual intervention. When vRtrMplsLspSwitchStbyPath is set
to 'doAction' a manual switch is attempted. When
vRtrMplsLspSwitchStbyPathForce is set to 'true' the manual switch is
forced.
When the value of vRtrMplsLspPathActiveByManual is set to
'notApplicable', the LSP path is active but not due to any manual
intervention.
When the value of vRtrMplsLspPathActiveByManual is set to 'noForce',
the LSP path has become active by a manual switch specified by the
user.
When the value of vRtrMplsLspPathActiveByManual is set to 'force', the
LSP path has become active by a forced manual switch executed by the
user."
::= { vRtrMplsLspPathEntry 63 }
vRtrMplsLspPathTimeoutIn OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathTimeoutIn indicates the amount of time
remaining, in seconds, for the LSP path state to time out after the
initial PATH message has been sent. If the timer expires and the LSP
path has not become operationally up, the LSP path is torn down and
the retry timer is started to schedule a new retry cycle."
::= { vRtrMplsLspPathEntry 64 }
vRtrMplsLspPathMBBTimeoutIn OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMBBTimeoutIn indicates the amount of time
remaining, in seconds, for the in-progress MBB path state to time out
after the initial PATH message has been sent. If the timer expires and
the in-progress MBB path has not become operationally up, the MBB path
is torn down and the retry timer is started to schedule a new retry
cycle."
::= { vRtrMplsLspPathEntry 65 }
vRtrMplsLspPathBfdTemplateName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP path."
::= { vRtrMplsLspPathEntry 66 }
vRtrMplsLspPathBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdEnable specifies whether BFD is enabled
or not for this LSP path."
DEFVAL { false }
::= { vRtrMplsLspPathEntry 67 }
vRtrMplsLspPathBfdPingIntvl OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdPingIntvl specifies the time interval
for periodic LSP ping for BFD bootstrapping.
The object vRtrMplsLspPathBfdPingIntvl is applicable to LSPs with
vRtrMplsLspType set to 'dynamic'.
When the value of vRtrMplsLspPathBfdPingIntvl is set to '0', it
disables LSP pings for BFD bootstrapping."
DEFVAL { 60 }
::= { vRtrMplsLspPathEntry 68 }
vRtrMplsLspPathLastUpdateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastUpdateTime indicates the sysUpTime
when the last update occurred"
::= { vRtrMplsLspPathEntry 69 }
vRtrMplsLspPathLastUpdateId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastUpdateId indicates the last update ID
which was processed."
::= { vRtrMplsLspPathEntry 70 }
vRtrMplsLspPathLastUpdateState OBJECT-TYPE
SYNTAX INTEGER {
none (1),
success (2),
fail (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastUpdateState indicates whether the last
update was successful or failed.
Possible states are
none (1) - no update invoked
success (2) - update successful
fail (3) - updated failed"
::= { vRtrMplsLspPathEntry 71 }
vRtrMplsLspPathLastUpdFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastUpdFailCode indicates the reason code
for in-progress update failure.
A value of 'none' indicates that no failure has occurred."
::= { vRtrMplsLspPathEntry 72 }
vRtrMplsLspPathBfdUpWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdUpWaitTimer specifies the time in
seconds the software will wait for the BFD session to come up.
The timer object is applicable for LSPs with vRtrMplsLspType set to
'srTe' or 'dynamic'.
The timer is started when BFD is first enabled on a path or BFD
transitions from up to down. When this timer expires and if BFD
session has not yet come up, the path is torn down by removing it
from TTM and the IOM and the retry timer is started."
DEFVAL { 4 }
::= { vRtrMplsLspPathEntry 73 }
vRtrMplsLspPathBfdUpWaitTmLeft OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdUpWaitTmLeft indicates the time in
seconds remaining in the vRtrMplsLspPathBfdUpWaitTimer."
::= { vRtrMplsLspPathEntry 74 }
vRtrMplsLspPathBfdState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
down (1),
up (2),
awaitToUp (3),
failToStart (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdState indicates state of the BFD
session on the LSP path."
::= { vRtrMplsLspPathEntry 75 }
vRtrMplsLspPathBfdStartFailRsn OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdStartFailRsn indicates the failure
reason when vRtrMplsLspPathBfdState is value 'failToStart'."
::= { vRtrMplsLspPathEntry 76 }
vRtrMplsLspPathBfdOperUpWaitTmr OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathBfdOperUpWaitTmr indicates operational
value of the time in seconds the software will wait for the BFD
session to come up.
When value of vRtrMplsLspPathBfdEnable to 'true',
vRtrMplsLspPathBfdOperUpWaitTmr will be set to
vRtrMplsLspPathBfdUpWaitTimer.
When value of vRtrMplsLspBfdEnable to 'true',
vRtrMplsLspPathBfdOperUpWaitTmr will be set to
vRtrMplsLspExtBfdUpWaitTimer.
When vRtrMplsLspPathBfdEnable and vRtrMplsLspBfdEnable are set to
'false', the value of vRtrMplsLspPathBfdOperUpWaitTmr is set to 0."
::= { vRtrMplsLspPathEntry 77 }
vRtrMplsLspPathSelfPingOprState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state for self-ping for this LSP path."
::= { vRtrMplsLspPathEntry 78 }
vRtrMplsLspPathLastMBBFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathLastMBBFailCode indicates the reason code
for last MBB failure before retry limit exceeded. A value of 0
indicates that no failure has occurred."
::= { vRtrMplsLspPathEntry 79 }
vRtrMplsLspPathDegraded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathDegraded indicates whether the LSP path is
degraded or not.
When value of vRtrMplsLspPathDegraded is 'true', the LSP path is
degraded. vRtrMplsLspPathDegradedReason indicates the reasons why the
LSP is degraded.
When value of vRtrMplsLspPathDegraded is 'false', the LSP path is not
degraded."
::= { vRtrMplsLspPathEntry 80 }
vRtrMplsLspPathDegradedReason OBJECT-TYPE
SYNTAX BITS {
frrInUse (0),
softPreempted (1),
bfdDown (2),
manualSwitch (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathDegradedReason indicates the set of
reasons why the LSP path is degraded.
If 'frrInUse' bit is set, LSP path is degraded because fast-reroute is
in use. If 'softPreempted' bit is set, LSP path is degraded because it
has been soft preempted. If 'bfd-down' bit is set, LSP path is
degraded because BFD session is down for this LSP path. If
'manual-switch' bit is set, LSP path is manually degraded because a
manual switch was triggered for the LSP."
::= { vRtrMplsLspPathEntry 81 }
vRtrMplsLspPathReturnPathLabel OBJECT-TYPE
SYNTAX Unsigned32 (32..1048512 | 4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathReturnPathLabel indicates the return path
label for the LSP Path."
DEFVAL { 4294967295 }
::= { vRtrMplsLspPathEntry 82 }
vRtrMplsLspPathStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspPathStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspPathStatTable has an entry for an association between a
Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or
tunnel) entry in the mplsTunnelTable."
::= { tmnxMplsObjs 5 }
vRtrMplsLspPathStatEntry OBJECT-TYPE
SYNTAX VRtrMplsLspPathStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for an
association between a Labeled Switch Path (LSP) in the
vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsLspPathEntry }
::= { vRtrMplsLspPathStatTable 1 }
VRtrMplsLspPathStatEntry ::= SEQUENCE
{
vRtrMplsLspPathTimeUp TmnxTimeInterval,
vRtrMplsLspPathTimeDown TmnxTimeInterval,
vRtrMplsLspPathRetryAttempts Unsigned32,
vRtrMplsLspPathTransitionCount Counter32,
vRtrMplsLspPathCspfQueries Counter32
}
vRtrMplsLspPathTimeUp OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this LSP path has
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %)."
::= { vRtrMplsLspPathStatEntry 1 }
vRtrMplsLspPathTimeDown OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this LSP Path has not been
operational."
::= { vRtrMplsLspPathStatEntry 2 }
vRtrMplsLspPathRetryAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful attempts which have been made to signal
this path. As soon as the path gets signalled, this is set to 0."
::= { vRtrMplsLspPathStatEntry 3 }
vRtrMplsLspPathTransitionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object vRtrMplsLspPathTransitionCount maintains the number of
transitions that have occurred for this LSP."
::= { vRtrMplsLspPathStatEntry 4 }
vRtrMplsLspPathCspfQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathCspfQueries indicates the number of CSPF
queries that have been made for this LSP path."
::= { vRtrMplsLspPathStatEntry 5 }
vRtrMplsXCTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsXCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has an entry for each mplsXCEntry
in the mplsXCTable. It serves as an another
indirect index to the mplsXCTable."
::= { tmnxMplsObjs 6 }
vRtrMplsXCEntry OBJECT-TYPE
SYNTAX VRtrMplsXCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the indices to be used to search the
mplsXCTable."
INDEX { mplsXCLspId }
::= { vRtrMplsXCTable 1 }
VRtrMplsXCEntry ::= SEQUENCE
{
vRtrMplsXCIndex Integer32,
vRtrMplsInSegmentIfIndex InterfaceIndexOrZero,
vRtrMplsInSegmentLabel MplsLabel,
vRtrMplsOutSegmentIndex Integer32,
vRtrMplsERHopTunnelIndex Integer32,
vRtrMplsARHopTunnelIndex Integer32,
vRtrMplsRsvpSessionIndex Unsigned32,
vRtrMplsXCFailCode TmnxMplsLspFailCode,
vRtrMplsXCCHopTableIndex Integer32
}
vRtrMplsXCIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index of the mplsXCTable. It represents mplsXCIndex, a field of the
mplsXCTable."
::= { vRtrMplsXCEntry 1 }
vRtrMplsInSegmentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index of the mplsXCTable. It represents
mplsInSegmentIfIndex of the mplsInSegmentTable."
::= { vRtrMplsXCEntry 2 }
vRtrMplsInSegmentLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index of the mplsXCTable. It represents mplsInSegmentLabel of the
mplsInSegmentTable."
::= { vRtrMplsXCEntry 3 }
vRtrMplsOutSegmentIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index of the mplsXCTable. It represents mplsOutSegmentIndex of the
mplsOutSegmentTable."
::= { vRtrMplsXCEntry 4 }
vRtrMplsERHopTunnelIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary index into the mplsTunnelHopTable identifying a particular
recorded hop list (stores ERO in LSR)."
::= { vRtrMplsXCEntry 5 }
vRtrMplsARHopTunnelIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary index into the mplsTunnelARHopTable identifying a particular
recorded hop list (stores RRO in LSR)."
::= { vRtrMplsXCEntry 6 }
vRtrMplsRsvpSessionIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index into the TIMETRA-RSVP-MIB::vRtrRsvpSessionTable identifying a
particular RSVP session."
::= { vRtrMplsXCEntry 7 }
vRtrMplsXCFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsXCFailCode indicates the reason code for
cross-connect failure. A value of 0 indicates that no failure
occurred."
::= { vRtrMplsXCEntry 8 }
vRtrMplsXCCHopTableIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to the vRtrMplsTunnelCHopTable entries that specify the hops for
the CSPF path for a detour LSP for this tunnel."
::= { vRtrMplsXCEntry 9 }
vRtrMplsGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsGeneralTable contains objects for general control and
management of an MPLS protocol instance within a virtual router."
::= { tmnxMplsObjs 7 }
vRtrMplsGeneralEntry OBJECT-TYPE
SYNTAX VRtrMplsGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of the MPLS protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent when vRtrMplsStatus in the vRtrConfTable is
set to 'create'. The entry is destroyed when vRtrMplsStatus is set
to 'delete'"
INDEX { vRtrID }
::= { vRtrMplsGeneralTable 1 }
VRtrMplsGeneralEntry ::= SEQUENCE
{
vRtrMplsGeneralLastChange TimeStamp,
vRtrMplsGeneralAdminState TmnxAdminState,
vRtrMplsGeneralOperState TmnxOperState,
vRtrMplsGeneralPropagateTtl TruthValue,
vRtrMplsGeneralTE INTEGER,
vRtrMplsGeneralNewLspIndex TestAndIncr,
vRtrMplsGeneralOptimizeTimer Unsigned32,
vRtrMplsGeneralFRObject TruthValue,
vRtrMplsGeneralResignalTimer Unsigned32,
vRtrMplsGeneralHoldTimer Unsigned32,
vRtrMplsGeneralDynamicBypass TruthValue,
vRtrMplsGeneralNextResignal Unsigned32,
vRtrMplsGeneralOperDownReason TmnxMplsOperDownReasonCode,
vRtrMplsGeneralSrlgFrr TruthValue,
vRtrMplsGeneralSrlgFrrStrict TruthValue,
vRtrMplsGeneralNewP2mpInstIndex TestAndIncr,
vRtrMplsGeneralLeastFillMinThd Unsigned32,
vRtrMplsGenLeastFillReoptiThd Unsigned32,
vRtrMplsGeneralUseSrlgDB TruthValue,
vRtrMplsGeneralP2mpResigTimer Unsigned32,
vRtrMplsGeneralP2mpNextResignal Unsigned32,
vRtrMplsGeneralSecFastRetryTimer Unsigned32,
vRtrMplsGeneralShortTTLPropLocal TruthValue,
vRtrMplsGeneralShortTTLPropTrans TruthValue,
vRtrMplsGeneralStaticLspFRTimer Unsigned32,
vRtrMplsGeneralAutoBWDefSampMul Unsigned32,
vRtrMplsGeneralAutoBWDefAdjMul Unsigned32,
vRtrMplsGeneralExpBackoffRetry TruthValue,
vRtrMplsGeneralCspfOnLooseHop TruthValue,
vRtrMplsGeneralP2PMaxByPassAssoc Unsigned32,
vRtrMplsGenP2pActPathFastRetry Unsigned32,
vRtrMplsGenP2mpS2lFastRetry Unsigned32,
vRtrMplsGenLspInitRetryTimeout Unsigned32,
vRtrMplsLoggerEventBundling TruthValue,
vRtrMplsGenIssuMplsLockdown TruthValue,
vRtrMplsGenFRAdminGroup TruthValue,
vRtrMplsGenRetryOnIgpOverload TruthValue,
vRtrMplsGenMbbPrefCurrentHops TruthValue,
vRtrMplsGeneralBypassResigTimer Unsigned32,
vRtrMplsGenBypassNextResignal Unsigned32,
vRtrMplsGeneralNewLspSRIndex TestAndIncr,
vRtrMplsGeneralPceReport BITS,
vRtrMplsGeneralEntropyLblRsvpTe INTEGER,
vRtrMplsGeneralEntropyLblSrTe INTEGER,
vRtrMplsGeneralAuxStats BITS,
vRtrMplsGenSrTeResignalTimer Unsigned32,
vRtrMplsGenMaxBypassPlrAssoc Unsigned32,
vRtrMplsGenLspSelfPingInterval TimeInterval,
vRtrMplsGenLspSelfPingTimeout TimeInterval,
vRtrMplsGenLspSelfPingRsvpTe INTEGER,
vRtrMplsGenSrTeResigOnIgpEvent TruthValue,
vRtrMplsGeneralV6OperState TmnxOperState,
vRtrMplsGeneralV6OperDownReason TmnxMplsOperDownReasonCode,
vRtrMplsGenSrteNextResignal Unsigned32,
vRtrMplsLspSelfPingTimeoutAction INTEGER,
vRtrMplsGenResignalOnIgpOverload TruthValue,
vRtrMplsGenTunnelTablePrefRsvpTe Unsigned32,
vRtrMplsGenTunnelTablePrefSrTe Unsigned32,
vRtrMplsGenRsvpPccOperState TmnxOperState,
vRtrMplsGenRsvpPceOperState TmnxOperState,
vRtrMplsGenSrTePccOperState TmnxOperState,
vRtrMplsGenSrTePceOperState TmnxOperState
}
vRtrMplsGeneralLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsGeneralEntry 1 }
vRtrMplsGeneralAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.
When vRtrMplsGeneralAdminState is set to 'outOfService', the agent
attempts to disable the MPLS protocol instance on this router."
DEFVAL { outOfService }
::= { vRtrMplsGeneralEntry 2 }
vRtrMplsGeneralOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrMplsGeneralOperState indicates the current operating state of this
MPLS protocol instance on this router."
::= { vRtrMplsGeneralEntry 3 }
vRtrMplsGeneralPropagateTtl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label. At the egress
ESR the TTL value from the label is written into the IP packet.
When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress
ESR ignores the IP packet TTl and writes the value of 255 into
the label, while the egress ESR does not write the label TTL
into the IP packet. This assumes that all ESRs have been
configured to have vRtrMplsGeneralPropagateTtl set to 'false',
or this may result in unpredictable behavior.
This object was made obsolete in release 11.0."
DEFVAL { true }
::= { vRtrMplsGeneralEntry 4 }
vRtrMplsGeneralTE OBJECT-TYPE
SYNTAX INTEGER {
none (1),
bgp (2),
bgpigp (3)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance.
This object was made obsolete in release 11.0."
DEFVAL { none }
::= { vRtrMplsGeneralEntry 5 }
vRtrMplsGeneralNewLspIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in the SET request that creates a new instance of
vRtrMplsLspEntry. If the SET fails with the code
'inconsistentValue', then the process must be repeated.
If the the SET succeeds, then the object is incremented
and the new instance is created according to the manager's
directions."
::= { vRtrMplsGeneralEntry 6 }
vRtrMplsGeneralOptimizeTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize the
LSPs.
When CSPF is enabled, changes in the network topology may cause the
existing path of a loose-hop LSP to become sub-optimal. Such LSPs can
be re-optimized and rerouted through more optimal paths by
recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
The value for vRtrMplsGeneralOptimizeTimer is by default inherited by
all LSPs and their paths."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 7 }
vRtrMplsGeneralFRObject OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMplsGeneralFRObject is ignored
if fast reroute is disabled for the LSP or if the LSP is using
'One-to-one Backup'.
The value for vRtrMplsGeneralFRObject is by default inherited by all
LSPs."
DEFVAL { true }
::= { vRtrMplsGeneralEntry 8 }
vRtrMplsGeneralResignalTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 30..10080)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralResignalTimer specifies the value for the
P2P (point-to-point) LSP resignal timer, that is the time, in minutes,
the software will wait before attempting to resignal the P2P LSPs.
When the resignal timer expires, if the new recorded hop list (RRO)
for an P2P LSP has a better metric than the current recorded hop list,
an attempt will be made to resignal that P2P LSP using the
make-before-break mechanism. If the attempt to resignal an P2P LSP
fails, the P2P LSP will continue to use the existing path and a
resignal will be attempted the next time the timer expires.
A value of 0 for the resignal timer indicates that timer-based P2P LSP
resignalling has been disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 9 }
vRtrMplsGeneralHoldTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds,
for which the ingress node holds a bit before programming its data
plane and declaring the lsp up to the service module.
A value of 0 indicates that the hold timer has been disabled."
DEFVAL { 1 }
::= { vRtrMplsGeneralEntry 10 }
vRtrMplsGeneralDynamicBypass OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic
bypass tunnels are enabled.
By default, dynamic bypass tunnels are enabled."
DEFVAL { true }
::= { vRtrMplsGeneralEntry 11 }
vRtrMplsGeneralNextResignal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralNextResignal indicates the time remaining,
in minutes, for the vRtrMplsGeneralResignalTimer to expire."
::= { vRtrMplsGeneralEntry 12 }
vRtrMplsGeneralOperDownReason OBJECT-TYPE
SYNTAX TmnxMplsOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralOperDownReason indicates the reason due to
which the MPLS instance is operationally down."
::= { vRtrMplsGeneralEntry 13 }
vRtrMplsGeneralSrlgFrr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any primary LSP path
on the system. When the value of vRtrMplsGeneralSrlgFrr is
'true' the use of SRLG constraint is enabled.
By default, the use of SRLG constraint is disabled."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 14 }
vRtrMplsGeneralSrlgFrrStrict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the SRLG
constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is
'true' and a path that meets SRLG constraints is not found, the
bypass or detour is not setup. If this value is set to 'true'
when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr
is set to 'true' also.
By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 15 }
vRtrMplsGeneralNewP2mpInstIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralNewP2mpInstIndex specifies the object that is used to assign
values to vRtrMplsP2mpInstIndex as described in 'Textual Conventions for SNMPv2'. The
network manager reads the object, and then writes the value back in the SET request that
creates a new instance of vRtrMplsP2mpInstEntry. If the SET fails with the code
'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the
object is incremented and the new instance is created according to the manager's
directions."
::= { vRtrMplsGeneralEntry 16 }
vRtrMplsGeneralLeastFillMinThd OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralLeastFillMinThd specifies in percentage
the least minimum threshold parameter used in the least-fill path
selection process. When comparing the percentage of least available
link bandwidth across the sorted paths, whenever two percentages
differ by less than the value configured as the
vRtrMplsGeneralLeastFillMinThd, CSPF will consider them equal and will
apply a random number generator to select the path among these paths. "
DEFVAL { 5 }
::= { vRtrMplsGeneralEntry 17 }
vRtrMplsGenLeastFillReoptiThd OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLeastFillReoptiThd specifies in percentage the
least reoptimization threshold parameter used in the least-fill path
selection process.
During a timer-based resignaling of an LSP path which has
vRtrMplsLspLeastFill enabled, CSPF will first update the
least-available bandwidth figure for the current path of this LSP. It
then applies the least-fill path selection method to select a new path
for this LSP. If the new computed path has the same cost as the
current path, it will compare the least-available bandwidth figures of
the two paths and if the difference exceeds
vRtrMplsGenLeastFillReoptiThd, a trap will be generated to indicate
that a better least-fill path is available for this LSP. "
DEFVAL { 10 }
::= { vRtrMplsGeneralEntry 18 }
vRtrMplsGeneralUseSrlgDB OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralUseSrlgDB specifies whether the use of the
user SRLG database by CSPF is enabled."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 19 }
vRtrMplsGeneralP2mpResigTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..10080)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralP2mpResigTimer specifies the value for the
P2MP (point to multi point) LSP resignal timer, that is the time, in
minutes, the software will wait before attempting to resignal the P2MP
LSPs.
When the resignal timer expires, an attempt to resignal the entire
P2MP instance comprising all source to leaf (S2Ls) are done, the IGP
or TE metric of the S2Ls are not taken into consideration.
If the attempt to resignal an P2MP LSP fails, the P2MP LSP will
continue to use the existing S2Ls and a resignal will be attempted the
next time the timer expires.
A value of 0 for the resignal timer indicates that timer-based P2MP
LSP resignalling has been disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 20 }
vRtrMplsGeneralP2mpNextResignal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralP2mpNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralP2mpResigTimer to
expire."
::= { vRtrMplsGeneralEntry 21 }
vRtrMplsGeneralSecFastRetryTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralSecFastRetryTimer specifies the value, in
seconds, used as fast retry timer for a secondary path. If the first
attempt to setup a secondary path fails due to a path error, the fast
retry timer will be started for the secondary path so that the path
can be retried sooner. If the next attempt also fails, further retries
for the path will use the configured value for LSP retry timer,
vRtrMplsLspRetryTimer.
If retry timer for the LSP is configured to be less than the MPLS
secondary-fast-retry-timer, all retries for the secondary path will
use the LSP retry timer.
A value of 0 indicates that fast retry for secondary paths has been
disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 22 }
vRtrMplsGeneralShortTTLPropLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralShortTTLPropLocal specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting MPLS packet for all local
packets forwarded over a LSP shortcut. When the value is 'true' TTL is
propagated from the IP packet header into the header of the resulting
MPLS packet."
DEFVAL { true }
::= { vRtrMplsGeneralEntry 23 }
vRtrMplsGeneralShortTTLPropTrans OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralShortTTLPropTrans specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting MPLS packet for all transit
packets forwarded over a LSP shortcut. When the value is 'true' TTL is
propagated from the IP packet header into the header of the resulting
MPLS packet."
DEFVAL { true }
::= { vRtrMplsGeneralEntry 24 }
vRtrMplsGeneralStaticLspFRTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralStaticLspFRTimer specifies the audit time
for static LSPs which are not currently up."
DEFVAL { 30 }
::= { vRtrMplsGeneralEntry 25 }
vRtrMplsGeneralAutoBWDefSampMul OBJECT-TYPE
SYNTAX Unsigned32 (1..511)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralAutoBWDefSampMul specifies the global
default for collection intervals in a sample interval."
DEFVAL { 1 }
::= { vRtrMplsGeneralEntry 26 }
vRtrMplsGeneralAutoBWDefAdjMul OBJECT-TYPE
SYNTAX Unsigned32 (1..16383)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralAutoBWDefAdjMul specifies the global
default for collection intervals in an adjust interval."
DEFVAL { 288 }
::= { vRtrMplsGeneralEntry 27 }
vRtrMplsGeneralExpBackoffRetry OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralExpBackoffRetry specifies the state of
Exponential Backoff Retry mechanism."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 28 }
vRtrMplsGeneralCspfOnLooseHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralCspfOnLooseHop specifies whether the
Constrained Shortest Path First (CSPF) calculation till the next loose
hop is enabled or not."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 29 }
vRtrMplsGeneralP2PMaxByPassAssoc OBJECT-TYPE
SYNTAX Unsigned32 (100..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralP2PMaxByPassAssoc specifies the maximum
number of LSP primary paths that can associate with each manual or
dynamic bypass point-to-point (P2P) LSP."
DEFVAL { 1000 }
::= { vRtrMplsGeneralEntry 30 }
vRtrMplsGenP2pActPathFastRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenP2pActPathFastRetry specifies the time, in
seconds, active path point-to-point (P2P) LSP waits before it attempts
to re-establish itself. This timer is started after first attempt to
setup active path P2P LSP fails.
When vRtrMplsGenP2pActPathFastRetry is set to 0, fast retry timer for
active path P2P LSP is disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 31 }
vRtrMplsGenP2mpS2lFastRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenP2mpS2lFastRetry specifies the time, in
seconds, active path point to multipoint (P2MP) source to leaf (S2L)
LSP waits before it attempts to re-establish itself. This timer is
started after first attempt to setup active path P2MP S2L LSP fails.
When vRtrMplsGenP2mpS2lFastRetry is set to 0, fast retry timer for
active path P2MP S2L LSP is disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 32 }
vRtrMplsGenLspInitRetryTimeout OBJECT-TYPE
SYNTAX Unsigned32 (10..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLspInitRetryTimeout specifies the amount of
time in seconds the software waits for an LSP path to come up after
sending out the initial Path message. If the initial retry timeout
period expires and the LSP path is not up, it is torn down and the LSP
retry timer is started to schedule a new retry cycle using a new
LSPId."
DEFVAL { 30 }
::= { vRtrMplsGeneralEntry 33 }
vRtrMplsLoggerEventBundling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLoggerEventBundling specifies whether or not the
notification bundling mechanism is enabled.
When the value of vRtrMplsLoggerEventBundling is set to 'true', all
TIMETRA-SYSTEM-MIB::tmnxConfigCreate and
TIMETRA-SYSTEM-MIB::tmnxConfigDelete notifications that are generated
because of creation or deletion of entries in the vRtrMplsXCTable
during quiet period of 2 minutes are bundled in a single notification.
An entry is created or deleted in vRtrMplsXCTable when a RSVP session
is created or deleted on this ingress, transit or egress router
instance causing creation or deletion of an entry in
TIMETRA-RSVP-MIB::vRtrRsvpSessionTable.
A vRtrMplsXCBundleChange notification is generated after every quiet
interval of 2 minutes if one or more RSVP session changed state and
retained that state during the quiet interval. However if the state of
the RSVP sessions does not remain stable for an entire quiet interval,
the notification is generated after the maximum interval period of 10
minutes has elapsed."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 34 }
vRtrMplsGenIssuMplsLockdown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenIssuMplsLockdown indicates if MPLS has entered
the state of not accepting new requests for creation of LSPs
(local/transit) during the minor ISSU(In Service Software Update)
operation."
::= { vRtrMplsGeneralEntry 39 }
vRtrMplsGenFRAdminGroup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenFRAdminGroup specifies whether or not the use
of administrative group constraints on a FRR backup LSP at a
Point-of-Local Repair(PLR) node is enabled.
When the value of vRtrMplsGenFRAdminGroup is set to 'true', each PLR
node reads the admin group constraints in the FAST_REROUTE object in
the Path message of the LSP primary path.
If the FAST_REROUTE object is not included in the Path message, then
the PLR will read the admin group constraints from the Session
Attribute object in the Path message."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 40 }
vRtrMplsGenRetryOnIgpOverload OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenRetryOnIgpOverload specifies whether or not to
teardown LSPs transiting through nodes that are in IGP overload state.
When the value of vRtrMplsGenRetryOnIgpOverload is set to 'true' and a
node is reporting that it is in IGP overload state, MPLS will tear-
down and retry LSP paths that are transiting through the overloaded
node.
When the value of vRtrMplsGenRetryOnIgpOverload is set to 'false' and
a node is reporting that it is in IGP overload state, MPLS will not
tear down LSP paths that are transiting through the overloaded node."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 41 }
vRtrMplsGenMbbPrefCurrentHops OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMbbPrefCurrentHops specifies whether or not
Constrained Shortest Path First (CSPF) for a Make-before-break (MBB)
path should give preference to hops/links used by the current Labeled
Switch Path (LSP)."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 42 }
vRtrMplsGeneralBypassResigTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..10080)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralBypassResigTimer specifies the value for
the Bypass LSP resignal timer, that is the time, in minutes, the
software will wait before attempting to resignal Bypass LSPs.
When the resignal timer expires, if the new CSPF path for a Bypass LSP
has a better metric than the current CSPF path, an attempt will be
made to resignal that Bypass LSP. If the attempt to resignal the
Bypass LSP fails, the FRR LSPs protected by that Bypass LSP will
continue to use that Bypass LSP and a resignal will be attempted the
next time the timer expires.
A value of 0 for the resignal timer indicates that timer-based Bypass
LSP resignalling has been disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 43 }
vRtrMplsGenBypassNextResignal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenBypassNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralBypassResigTimer to
expire."
::= { vRtrMplsGeneralEntry 44 }
vRtrMplsGeneralNewLspSRIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralNewLspSRIndex is used to specify values
assigned to vRtrMplsLspIndex for Segment Routing LSPs.
The network manager reads the object, and then writes the value back
in the SET request that creates a new instance of vRtrMplsLspEntry.
If the SET fails with the code 'inconsistentValue', then the process
must be repeated. If the the SET succeeds, then the object is incremented
and the new instance is created according to the manager's
directions.
The range for Segment Routing LSPs is as specified in the textual
convention for vRtrMplsLspIndex."
::= { vRtrMplsGeneralEntry 45 }
vRtrMplsGeneralPceReport OBJECT-TYPE
SYNTAX BITS {
srTe (0),
rsvpTe (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of configured TE properties for this LSP expressed as a bit
map."
DEFVAL { {} }
::= { vRtrMplsGeneralEntry 46 }
vRtrMplsGeneralEntropyLblRsvpTe OBJECT-TYPE
SYNTAX INTEGER {
forceDisable (1),
enable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralEntropyLblRsvpTe specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for RSVP-TE LSPs.
When the value of vRtrMplsGeneralEntropyLblRsvpTe is set to 'enable',
the application will account for EL/ELC in the label stack without
taking into consideration the value of the enabled ELC.
When the value of vRtrMplsGeneralEntropyLblRsvpTe is set to
'force-disable', the application will ignore the value of enabled ELC.
When the value of vRtrMplsGeneralEntropyLblRsvpTe is modified, Entropy
Label will become operational when this LSP is resignalled.
The default value of vRtrMplsGeneralEntropyLblRsvpTe is set to
'enable'."
DEFVAL { enable }
::= { vRtrMplsGeneralEntry 47 }
vRtrMplsGeneralEntropyLblSrTe OBJECT-TYPE
SYNTAX INTEGER {
forceDisable (1),
enable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralEntropyLblSrTe specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for SR-TE LSPs.
When the value of vRtrMplsGeneralEntropyLblSrTe is set to 'enable',
the application will account for EL/ELC in the label stack without
taking into consideration the value of the enabled ELC.
When the value of vRtrMplsGeneralEntropyLblSrTe is set to
'force-disable', the application will ignore the value of enabled ELC.
When the value of vRtrMplsGeneralEntropyLblSrTe is modified, Entropy
Label will become operational when this LSP is resignalled.
The default value of vRtrMplsGeneralEntropyLblSrTe is set to 'enable'."
DEFVAL { enable }
::= { vRtrMplsGeneralEntry 48 }
vRtrMplsGeneralAuxStats OBJECT-TYPE
SYNTAX BITS {
sr (0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralAuxStats specifies which types of labeled
traffic are counted in the MPLS auxiliary statistics table.
By default, all labeled traffic is counted in the default MPLS
statistics table.
If the 'sr' bit is set, Segment Routing traffic is counted in the
MPLS auxiliary statistics table."
DEFVAL { {} }
::= { vRtrMplsGeneralEntry 49 }
vRtrMplsGenSrTeResignalTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 30..10080)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrTeResignalTimer specifies the value for the
SR-TE LSPs resignal timer, that is the time, in minutes, the software
will wait before attempting to resignal the SR-TE LSPs.
When the resignal timer expires, if the new recorded hop list (RRO)
for an SR-TE LSP has a better metric than the current recorded hop
list, an attempt will be made to resignal that LSP using the
make-before-break mechanism. If the attempt to resignal an SR-TE LSP
fails, the LSP will continue to use the existing path and a resignal
will be attempted the next time the timer expires.
A value of 0 for the resignal timer indicates that timer-based SR-TE
LSP resignalling has been disabled."
DEFVAL { 0 }
::= { vRtrMplsGeneralEntry 50 }
vRtrMplsGenMaxBypassPlrAssoc OBJECT-TYPE
SYNTAX Unsigned32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMaxBypassPlrAssoc specifies the maxiumum
bypass PLR assocations."
DEFVAL { 16 }
::= { vRtrMplsGeneralEntry 51 }
vRtrMplsGenLspSelfPingInterval OBJECT-TYPE
SYNTAX TimeInterval (1..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLspSelfPingInterval specifies the interval
duration at which LSP self ping packets are sent until a reply is
received from the far end of the session ID."
DEFVAL { 1 }
::= { vRtrMplsGeneralEntry 52 }
vRtrMplsGenLspSelfPingTimeout OBJECT-TYPE
SYNTAX TimeInterval (3..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLspSelfPingTimeout specifies the value of
timeout expiry duration up to which the lsp-self-ping packets will be
sent. If the timeout expires before an LSP self ping has been
received, then the system should tear down the path and go back to
CSPF for a new path"
DEFVAL { 300 }
::= { vRtrMplsGeneralEntry 53 }
vRtrMplsGenLspSelfPingRsvpTe OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLspSelfPingRsvpTe specifies whether the
application takes into account the value of Self Ping in the label
stack of RSVP-TE LSPs.
When the value of vRtrMplsGenLspSelfPingRsvpTe is set to 'enable', the
application will take into consideration the values of
vRtrMplsGenLspSelfPingInterval and vRtrMplsGenLspSelfPingTimeout.
When the value of vRtrMplsGenLspSelfPingRsvpTe is set to 'disable',
the application will not take into consideration the values of
vRtrMplsGenLspSelfPingInterval and vRtrMplsGenLspSelfPingTimeout."
DEFVAL { disable }
::= { vRtrMplsGeneralEntry 54 }
vRtrMplsGenSrTeResigOnIgpEvent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrTeResigOnIgpEvent specifies re-optimization
of SR-TE LSPs triggered by IGP events is enabled or disabled."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 55 }
vRtrMplsGeneralV6OperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrMplsGeneralV6OperState indicates the current operating state of
MPLS protocol instance on this router for srte ipv6."
::= { vRtrMplsGeneralEntry 56 }
vRtrMplsGeneralV6OperDownReason OBJECT-TYPE
SYNTAX TmnxMplsOperDownReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralV6OperDownReason indicates the reason due
to which the MPLS instance is operationally down for srte ipv6."
::= { vRtrMplsGeneralEntry 57 }
vRtrMplsGenSrteNextResignal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrteNextResignal indicates the time remaining,
in minutes, for the vRtrMplsGenSrTeResignalTimer to expire."
::= { vRtrMplsGeneralEntry 58 }
vRtrMplsLspSelfPingTimeoutAction OBJECT-TYPE
SYNTAX INTEGER {
retry (1),
switch (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSelfPingTimeoutAction specifies the timeout
action of Self Ping for RSVP-TE LSPs.
When the value of vRtrMplsLspSelfPingTimeoutAction is set to retry,
the application tears down the LSP path, and starts resignaling the
LSP path after the resignal timer expiry.
When the value of vRtrMplsLspSelfPingTimeoutAction is set to switch,
the application switches over to the candidate LSP path."
DEFVAL { retry }
::= { vRtrMplsGeneralEntry 59 }
vRtrMplsGenResignalOnIgpOverload OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenResignalOnIgpOverload specifies whether or not
RSVP-TE LSPs will be resignaled when IGP overload bit is received.
When the value of vRtrMplsGenResignalOnIgpOverload is set to 'true'
and a node reports that it is in IGP overload state, MPLS will force
the expiry of P2P and/or P2MP resignal timers for RSVP-TE LSPs.
When the value of vRtrMplsGenResignalOnIgpOverload is set to 'false'
and a node reports that it is in IGP overload state, MPLS will not
force the expiry of P2P and/or P2MP resignal timers for RSVP-TE LSPs."
DEFVAL { false }
::= { vRtrMplsGeneralEntry 60 }
vRtrMplsGenTunnelTablePrefRsvpTe OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenTunnelTablePrefRsvpTe specifies the tunnel
table preference in RSVP-TE LSPs."
DEFVAL { 7 }
::= { vRtrMplsGeneralEntry 61 }
vRtrMplsGenTunnelTablePrefSrTe OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsGenTunnelTablePrefSrTe specifies the tunnel table
preference in SR-TE LSPs."
DEFVAL { 8 }
::= { vRtrMplsGeneralEntry 62 }
vRtrMplsGenRsvpPccOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenRsvpPccOperState indicates operational state
for PCC in relation to RSVP LSPs.
A value of 'unknown' indicates that MPLS has no information regarding
RSVP related PCC operational state.
A value of 'inService' indicates that RSVP related PCC is
operationally up.
A value of 'outOfService' indicates that RSVP related PCC is
operationally down.
A value of 'transition' indicates that RSVP related PCC is in the
process of becoming operationally up."
::= { vRtrMplsGeneralEntry 63 }
vRtrMplsGenRsvpPceOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenRsvpPceOperState indicates operational state
for PCE in relation to RSVP LSPs.
A value of 'unknown' indicates that MPLS has no information regarding
RSVP related PCE operational state.
A value of 'inService' indicates that RSVP related PCE is
operationally up.
A value of 'outOfService' indicates that RSVP related PCE is
operationally down."
::= { vRtrMplsGeneralEntry 64 }
vRtrMplsGenSrTePccOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrTePccOperState indicates operational state
for PCC in relation to SR-TE LSPs.
A value of 'unknown' indicates that MPLS has no information regarding
SR-TE related PCC operational state.
A value of 'inService' indicates that SR-TE related PCC is
operationally up.
A value of 'outOfService' indicates that SR-TE related PCC is
operationally down.
A value of 'transition' indicates that SR-TE related PCC is in the
process of becoming operationally up."
::= { vRtrMplsGeneralEntry 65 }
vRtrMplsGenSrTePceOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrTePceOperState indicates operational state
for PCE in relation to SR-TE LSPs.
A value of 'unknown' indicates that MPLS has no information regarding
SR-TE related PCE operational state.
A value of 'inService' indicates that SR-TE related PCE is
operationally up.
A value of 'outOfService' indicates that SR-TE related PCE is
operationally down."
::= { vRtrMplsGeneralEntry 66 }
vRtrMplsGeneralStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsGeneralStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsGeneralStatTable contains statistics for an MPLS protocol
instance within a virtual router."
::= { tmnxMplsObjs 8 }
vRtrMplsGeneralStatEntry OBJECT-TYPE
SYNTAX VRtrMplsGeneralStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for an instance
of the MPLS protocol running within a virtual router.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsGeneralEntry }
::= { vRtrMplsGeneralStatTable 1 }
VRtrMplsGeneralStatEntry ::= SEQUENCE
{
vRtrMplsGeneralStaticLspOriginate Gauge32,
vRtrMplsGeneralStaticLspTransit Gauge32,
vRtrMplsGeneralStaticLspTerminate Gauge32,
vRtrMplsGeneralDynamicLspOriginate Gauge32,
vRtrMplsGeneralDynamicLspTransit Gauge32,
vRtrMplsGeneralDynamicLspTerminate Gauge32,
vRtrMplsGeneralDetourLspOriginate Gauge32,
vRtrMplsGeneralDetourLspTransit Gauge32,
vRtrMplsGeneralDetourLspTerminate Gauge32,
vRtrMplsGeneralS2lOriginate Gauge32,
vRtrMplsGeneralS2lTransit Gauge32,
vRtrMplsGeneralS2lTerminate Gauge32,
vRtrMplsGeneralLspEgrStatCount Counter32,
vRtrMplsGeneralLspIgrStatCount Counter32,
vRtrMplsGenMplsTpLspOriginate Gauge32,
vRtrMplsGenMplsTpLspTransit Gauge32,
vRtrMplsGenMplsTpLspTerminate Gauge32,
vRtrMplsGenMplsTpOrigPathInst Gauge32,
vRtrMplsGenMplsTpTranPathInst Gauge32,
vRtrMplsGenMplsTpTermPathInst Gauge32,
vRtrMplsGeneralMeshP2pOriginate Gauge32,
vRtrMplsGeneralOneHopP2pOrigin Gauge32,
vRtrMplsGeneralSrTeLspOriginate Gauge32,
vRtrMplsGenMeshP2PSrTeLspOrig Gauge32,
vRtrMplsGenOneHopP2PSrTeLspOrig Gauge32,
vRtrMplsGenPceInitP2PSrTeLspOrig Gauge32,
vRtrMplsGenLspSelfPingTimeouts Counter32,
vRtrMplsGenLspSelfPingOamNoRsc Counter32,
vRtrMplsGenDynP2pLspUp Gauge32,
vRtrMplsGenSrTeIpv4LspUp Gauge32,
vRtrMplsGenSrTeIpv6LspUp Gauge32,
vRtrMplsGenMeshSrTeIpv4LspUp Gauge32,
vRtrMplsGenMeshSrTeIpv6LspUp Gauge32,
vRtrMplsGenOneHopSrTeIpv4LspUp Gauge32,
vRtrMplsGenOneHopSrTeIpv6LspUp Gauge32,
vRtrMplsGenPceInitSrTeIpv4LspUp Gauge32,
vRtrMplsGenPceInitSrTeIpv6LspUp Gauge32,
vRtrMplsGenOnDemandSrTeLspOrig Gauge32,
vRtrMplsGenOnDemandSrTeIpv4LspUp Gauge32,
vRtrMplsGenOnDemandSrTeIpv6LspUp Gauge32
}
vRtrMplsGeneralStaticLspOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralStaticLspOriginate indicates the number of
static LSPs that originate at this virtual router."
::= { vRtrMplsGeneralStatEntry 1 }
vRtrMplsGeneralStaticLspTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralStaticLspTransit indicates the number of
static LSPs that transit through this virtual router."
::= { vRtrMplsGeneralStatEntry 2 }
vRtrMplsGeneralStaticLspTerminate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralStaticLspTerminate indicates the number of
static LSPs that terminate at this virtual router."
::= { vRtrMplsGeneralStatEntry 3 }
vRtrMplsGeneralDynamicLspOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDynamicLspOriginate indicates the number
of dynamic LSP paths that originate at this virtual router."
::= { vRtrMplsGeneralStatEntry 4 }
vRtrMplsGeneralDynamicLspTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDynamicLspTransit indicates the number of dynamic LSPs
that transit through this virtual router."
::= { vRtrMplsGeneralStatEntry 5 }
vRtrMplsGeneralDynamicLspTerminate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDynamicLspTerminate indicates the number
of dynamic LSPs that terminate at this virtual router."
::= { vRtrMplsGeneralStatEntry 6 }
vRtrMplsGeneralDetourLspOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDetourLspOriginate indicates the number of
detour LSPs that originate at this virtual router."
::= { vRtrMplsGeneralStatEntry 7 }
vRtrMplsGeneralDetourLspTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDetourLspTransit indicates the number of
detour LSPs that transit through this virtual router."
::= { vRtrMplsGeneralStatEntry 8 }
vRtrMplsGeneralDetourLspTerminate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralDetourLspTerminate indicates the number of
detour LSPs that terminate at this virtual router."
::= { vRtrMplsGeneralStatEntry 9 }
vRtrMplsGeneralS2lOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralS2lOriginate indicates the number of
source to leaf (S2L) sub LSP path called as S2L here that originate at
this virtual router."
::= { vRtrMplsGeneralStatEntry 10 }
vRtrMplsGeneralS2lTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralS2lTransit indicates the number of S2Ls
that transit through this virtual router."
::= { vRtrMplsGeneralStatEntry 11 }
vRtrMplsGeneralS2lTerminate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralS2lTerminate indicates the number of S2Ls
that terminate at this virtual router."
::= { vRtrMplsGeneralStatEntry 12 }
vRtrMplsGeneralLspEgrStatCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralLspEgrStatCount indicates the number of
LSP egress statistics configured on this virtual router."
::= { vRtrMplsGeneralStatEntry 13 }
vRtrMplsGeneralLspIgrStatCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralLspIgrStatCount indicates the number of
LSP ingress statistics configured on this virtual router."
::= { vRtrMplsGeneralStatEntry 14 }
vRtrMplsGenMplsTpLspOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMplsTpLspOriginate indicates the number of
MPLS TP LSPs that originate at this virtual router."
::= { vRtrMplsGeneralStatEntry 15 }
vRtrMplsGenMplsTpLspTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMplsTpLspTransit indicates the number of MPLS
TP LSPs that transit through this virtual router."
::= { vRtrMplsGeneralStatEntry 16 }
vRtrMplsGenMplsTpLspTerminate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMplsTpLspTerminate indicates the number of
MPLS TP LSPs that terminate at this virtual router."
::= { vRtrMplsGeneralStatEntry 17 }
vRtrMplsGenMplsTpOrigPathInst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMplsTpOrigPathInst indicates the number of
MPLS TP LSPs originate path instances."
::= { vRtrMplsGeneralStatEntry 18 }
vRtrMplsGenMplsTpTranPathInst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMplsTpTranPathInst indicates the number of
MPLS TP LSPs transit path instances."
::= { vRtrMplsGeneralStatEntry 19 }
vRtrMplsGenMplsTpTermPathInst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMplsTpTermPathInst indicates the number of
MPLS TP LSPs terminated path instances."
::= { vRtrMplsGeneralStatEntry 20 }
vRtrMplsGeneralMeshP2pOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralMeshP2pOriginate indicates the number of
Mesh P2P LSPs originating at this virtual router."
::= { vRtrMplsGeneralStatEntry 21 }
vRtrMplsGeneralOneHopP2pOrigin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralOneHopP2pOrigin indicates the number of
One Hop P2P LSPs originating at this virtual router."
::= { vRtrMplsGeneralStatEntry 22 }
vRtrMplsGeneralSrTeLspOriginate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGeneralSrTeLspOriginate indicates the number of
Segment Routing TE LSPs that are originating at this virtual router."
::= { vRtrMplsGeneralStatEntry 23 }
vRtrMplsGenMeshP2PSrTeLspOrig OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMeshP2PSrTeLspOrig indicates the number of
Mesh P2P Segment Routing TE LSPs that are originating at this virtual
router."
::= { vRtrMplsGeneralStatEntry 24 }
vRtrMplsGenOneHopP2PSrTeLspOrig OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenOneHopP2PSrTeLspOrig indicates the number of
One-Hop P2P Segment Routing TE LSPs that are originating at this
virtual router."
::= { vRtrMplsGeneralStatEntry 25 }
vRtrMplsGenPceInitP2PSrTeLspOrig OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenPceInitP2PSrTeLspOrig indicates the number of
PCE Init P2P Segment Routing TE LSPs that are originating at this
virtual router."
::= { vRtrMplsGeneralStatEntry 26 }
vRtrMplsGenLspSelfPingTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLspSelfPingTimeouts indicate the number of LSP
self-ping timeouts for LSPs originating at this virtual router."
::= { vRtrMplsGeneralStatEntry 27 }
vRtrMplsGenLspSelfPingOamNoRsc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenLspSelfPingOamNoRsc indicates the number of
failed LSP self-ping due to oam resource limitations."
::= { vRtrMplsGeneralStatEntry 28 }
vRtrMplsGenDynP2pLspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenDynP2pLspUp indicates the number of LSPS of
vRtrMplsLspType 'dynamic' that are operationally up on this virtual
router."
::= { vRtrMplsGeneralStatEntry 29 }
vRtrMplsGenSrTeIpv4LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrTeIpv4LspUp indicates the number of IPv4
LSPs of vRtrMplsLspType 'srTe' that are operationally up on this
virtual router."
::= { vRtrMplsGeneralStatEntry 30 }
vRtrMplsGenSrTeIpv6LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenSrTeIpv6LspUp indicates the number of IPv6
LSPs of vRtrMplsLspType 'srTe' that are operationally up on this
virtual router."
::= { vRtrMplsGeneralStatEntry 31 }
vRtrMplsGenMeshSrTeIpv4LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMeshSrTeIpv4LspUp indicates the number of IPv4
LSPs of vRtrMplsLspType 'meshP2pSrTe' that are operationally up on
this virtual router."
::= { vRtrMplsGeneralStatEntry 32 }
vRtrMplsGenMeshSrTeIpv6LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenMeshSrTeIpv6LspUp indicates the number of IPv6
LSPs of vRtrMplsLspType 'meshP2pSrTe' that are operationally up on
this virtual router."
::= { vRtrMplsGeneralStatEntry 33 }
vRtrMplsGenOneHopSrTeIpv4LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenOneHopSrTeIpv4LspUp indicates the number of
IPv4 LSPs of vRtrMplsLspType 'oneHopP2pSrTe' that are operationally up
on this virtual router."
::= { vRtrMplsGeneralStatEntry 34 }
vRtrMplsGenOneHopSrTeIpv6LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenOneHopSrTeIpv6LspUp indicates the number of
IPv6 LSPs of vRtrMplsLspType 'oneHopP2pSrTe' that are operationally up
on this virtual router."
::= { vRtrMplsGeneralStatEntry 35 }
vRtrMplsGenPceInitSrTeIpv4LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenPceInitSrTeIpv4LspUp indicates the number of
IPv4 LSPs of vRtrMplsLspType 'pceInitP2pSrTe' that are operationally
up on this virtual router."
::= { vRtrMplsGeneralStatEntry 36 }
vRtrMplsGenPceInitSrTeIpv6LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenPceInitSrTeIpv6LspUp indicates the number of
IPv6 LSPs of vRtrMplsLspType 'pceInitP2pSrTe' that are operationally
up this virtual router."
::= { vRtrMplsGeneralStatEntry 37 }
vRtrMplsGenOnDemandSrTeLspOrig OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenOnDemandSrTeLspOrig indicates the number of
LSPs of vRtrMplsLspType 'onDemandP2pSrTe' that are operationally up
in this virtual router."
::= { vRtrMplsGeneralStatEntry 38 }
vRtrMplsGenOnDemandSrTeIpv4LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenOnDemandSrTeIpv4LspUp indicates the number of
IPv4 LSPs of vRtrMplsLspType 'onDemandP2pSrTe' that are operationally
up in this virtual router."
::= { vRtrMplsGeneralStatEntry 39 }
vRtrMplsGenOnDemandSrTeIpv6LspUp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsGenOnDemandSrTeIpv6LspUp indicates the number of
IPv6 LSPs of vRtrMplsLspType 'onDemandP2pSrTe' that are operationally
up in this virtual router."
::= { vRtrMplsGeneralStatEntry 40 }
vRtrMplsIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsIfTable has an entry for each router interface configured
for MPLS in the system."
::= { tmnxMplsObjs 9 }
vRtrMplsIfEntry OBJECT-TYPE
SYNTAX VRtrMplsIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an interface on this virtual router
that participates in the MPLS protocol. A row cannot be created
or deleted via SNMP SET requests. A row with default attribute
values is created by setting the vRtrIfEntry attribute,
vRtrIfMplsStatus, to 'create'. A row is removed if
vRtrIfMplsStatus is set to 'delete'. However, an attempt to
destroy a row will fail if vRtrMplsIfAdminState has
not first been set to 'outOfService'."
INDEX {
vRtrID,
vRtrIfIndex
}
::= { vRtrMplsIfTable 1 }
VRtrMplsIfEntry ::= SEQUENCE
{
vRtrMplsIfAdminState TmnxAdminState,
vRtrMplsIfOperState TmnxOperState,
vRtrMplsIfAdminGroup Unsigned32,
vRtrMplsIfTeMetric Unsigned32,
vRtrMplsIfV6OperState TmnxOperState
}
vRtrMplsIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state for the MPLS protocol running on this
MPLS interface."
DEFVAL { outOfService }
::= { vRtrMplsIfEntry 1 }
vRtrMplsIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the current status of the MPLS protocol
running on this MPLS interface. When the
TIMETRA-VRTR-MIB::vRtrIfPortID object of this interface is set to a
loopback port identifier, the operational state is not relevant and an
SNMP GET request on this object will return 'unknown'."
::= { vRtrMplsIfEntry 2 }
vRtrMplsIfAdminGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsIfAdminGroup is a bit-map that identifies the
admin groups to which the interface belongs. If bit 'n' is set, then
the interface belongs to the admin group with value 'n'.
By default, the interface does not belong to any admin groups."
DEFVAL { '00000000'H }
::= { vRtrMplsIfEntry 3 }
vRtrMplsIfTeMetric OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsIfTeMetric specifies the traffic engineering
metric for this interface. The TE metric is exchanged in addition to
the IGP metric by the IGPs. Depending on the value configured for
vRtrMplsLspCspfTeMetricEnabled, either the TE metric or the native IGP
metric is used in CSPF computations of the LSP paths. The maximum
value that can be configured is a 24 bit value."
DEFVAL { 0 }
::= { vRtrMplsIfEntry 4 }
vRtrMplsIfV6OperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the current status of the MPLS protocol
running on this MPLS interface for srte ipv6. When the
TIMETRA-VRTR-MIB::vRtrIfPortID object of this interface is set to a
loopback port identifier, the operational state is not relevant and an
SNMP GET request on this object will return 'unknown'."
::= { vRtrMplsIfEntry 5 }
vRtrMplsIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsIfStatTable has an entry for each router interface
configured for MPLS in the system."
::= { tmnxMplsObjs 10 }
vRtrMplsIfStatEntry OBJECT-TYPE
SYNTAX VRtrMplsIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for an interface
on this virtual router that participates in the MPLS protocol.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsIfEntry }
::= { vRtrMplsIfStatTable 1 }
VRtrMplsIfStatEntry ::= SEQUENCE
{
vRtrMplsIfTxPktCount Counter64,
vRtrMplsIfRxPktCount Counter64,
vRtrMplsIfTxOctetCount Counter64,
vRtrMplsIfRxOctetCount Counter64,
vRtrMplsIfAltTxPktCount Counter64,
vRtrMplsIfAltRxPktCount Counter64,
vRtrMplsIfAltTxOctetCount Counter64,
vRtrMplsIfAltRxOctetCount Counter64
}
vRtrMplsIfTxPktCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MPLS labeled packets transmitted from this
interface."
::= { vRtrMplsIfStatEntry 1 }
vRtrMplsIfRxPktCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MPLS labeled packets received on this interface."
::= { vRtrMplsIfStatEntry 2 }
vRtrMplsIfTxOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes in MPLS labeled packets transmitted on this
interface."
::= { vRtrMplsIfStatEntry 3 }
vRtrMplsIfRxOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes in MPLS labeled packets received on this
interface."
::= { vRtrMplsIfStatEntry 4 }
vRtrMplsIfAltTxPktCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SR-MPLS labeled packets transmitted from this
interface."
::= { vRtrMplsIfStatEntry 5 }
vRtrMplsIfAltRxPktCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SR-MPLS labeled packets received on this
interface."
::= { vRtrMplsIfStatEntry 6 }
vRtrMplsIfAltTxOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes in SR-MPLS labeled packets transmitted on
this interface."
::= { vRtrMplsIfStatEntry 7 }
vRtrMplsIfAltRxOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes in SR-MPLS labeled packets received on this
interface."
::= { vRtrMplsIfStatEntry 8 }
vRtrMplsTunnelARHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry in the
MPLS-TE-MIB."
::= { tmnxMplsObjs 11 }
vRtrMplsTunnelARHopEntry OBJECT-TYPE
SYNTAX VRtrMplsTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry in this table corresponds to a row entry in the
mplsTunnelARHopTable and adds to the information contained in that
table"
AUGMENTS { mplsTunnelARHopEntry }
::= { vRtrMplsTunnelARHopTable 1 }
VRtrMplsTunnelARHopEntry ::= SEQUENCE
{
vRtrMplsTunnelARHopProtection BITS,
vRtrMplsTunnelARHopRecordLabel MplsLabel,
vRtrMplsTunnelARHopRouterId IpAddress,
vRtrMplsTunnelARHopUnnumIfID Unsigned32,
vRtrMplsTunnelARHopSIDType INTEGER,
vRtrMplsTunnelARHopNgRouterId InetAddress,
vRtrMplsTunnelARHopNgRtrIdType InetAddressType
}
vRtrMplsTunnelARHopProtection OBJECT-TYPE
SYNTAX BITS {
localAvailable (0),
localInUse (1),
bandwidthProtected (2),
nodeProtected (3),
preemptionPending (4),
nodeId (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the 'localAvailable' bit is set, it indicates that the link
downstream of this node has been protected by means of a local repair
mechanism. This mechanism can be either the one-to-one backup method
or the facility backup method.
If the 'localInUse' bit is set, then it indicates that the local
protection mechanism is being used to maintain this tunnel.
If the 'bandwidthProtected' bit is set, then it indicates that the
backup path is guaranteed to provide the desired bandwidth.
If the 'nodeProtected' bit is set, then it indicates that the backup
path provides protection against the failure of the next LSR along the
LSP.
If the 'nodeId' bit is set, it indicates that the address specified in
the Record Route Object's IPv4 or IPv6 sub-object is a nodeId address."
::= { vRtrMplsTunnelARHopEntry 1 }
vRtrMplsTunnelARHopRecordLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If label recording is enabled, vRtrMplsTunnelARHopRecordLabel
specifies the label that is advertised to the previous hop in the hop
list. If label recording is disabled, vRtrMplsTunnelARHopRecordLabel
will have a value of 4294967295"
::= { vRtrMplsTunnelARHopEntry 2 }
vRtrMplsTunnelARHopRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"vRtrMplsTunnelARHopRouterId indicates the router ID of the node
corresponding to this hop.
vRtrMplsTunnelARHopRouterId is obsoleted in 20.0, replaced by
vRtrMplsTunnelARHopNgRouterId"
::= { vRtrMplsTunnelARHopEntry 3 }
vRtrMplsTunnelARHopUnnumIfID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelARHopUnnumIfID indicates the unnumbered
interface identifier of this hop.
This object should be used in conjunction with
vRtrMplsTunnelARHopNgRouterId which would contain the LSR Router ID
for the unnumbered interface.
If mplsTunnelARHopAddrType is set to unnum(100), then this entry is
valid."
::= { vRtrMplsTunnelARHopEntry 4 }
vRtrMplsTunnelARHopSIDType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
nodeSid (2),
adjacencySid (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelARHopSIDType indicates the type of SID for
this hop.
When the value of vRtrMplsTunnelARHopSIDType is 'notApplicable', it
indicates that this hop is not associated with an SR-TE LSP and hence
SID type does not apply for this hop.
When the value of vRtrMplsTunnelARHopSIDType is 'nodeSid', it
indicates that this hop is associated with an SR-TE LSP and represents
a Node SID.
When the value of vRtrMplsTunnelARHopSIDType is 'adjacencySid', it
indicates that this hop is associated with an SR-TE LSP and represents
an Adjacency SID."
::= { vRtrMplsTunnelARHopEntry 5 }
vRtrMplsTunnelARHopNgRouterId OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelARHopNgRouterId indicates the Router ID of
the node corresponding to this hop. Currently IPV6 Router ID is
supported by this object.
The IP address type of vRtrMplsTunnelARHopNgRouterId is specified by
the value of mplsTunnelARHopAddrType. Currently value of 'ipv6' is
supported."
::= { vRtrMplsTunnelARHopEntry 6 }
vRtrMplsTunnelARHopNgRtrIdType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelARHopNgRtrIdType indicates the type of
address for this router-id.
When the value of vRtrMplsTunnelARHopNgRtrIdType is 'ipv4', it
indicates that vRtrMplsTunnelARHopNgRouterId of this hop is of ipv4
type.
When the value of vRtrMplsTunnelARHopNgRtrIdType is 'ipv6', it
indicates that vRtrMplsTunnelARHopNgRouterId of this hop is of ipv6
type."
::= { vRtrMplsTunnelARHopEntry 7 }
vRtrMplsTunnelCHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsTunnelCHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsTunnelCHopTable is used to hold the CSPF path for a detour
LSP. Each entry indicates a single hop.
Primary index is the vRtrMplsTunnelCHopListIndex which associates
multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single
mplsTunnelEntry specified in the mplsTunnelTable.
The first row in the table is the first hop after the origination
point of the tunnel."
::= { tmnxMplsObjs 12 }
vRtrMplsTunnelCHopEntry OBJECT-TYPE
SYNTAX VRtrMplsTunnelCHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a CSPF tunnel hop. Entries are
created and deleted by the system."
INDEX {
vRtrMplsTunnelCHopListIndex,
vRtrMplsTunnelCHopIndex
}
::= { vRtrMplsTunnelCHopTable 1 }
VRtrMplsTunnelCHopEntry ::= SEQUENCE
{
vRtrMplsTunnelCHopListIndex Integer32,
vRtrMplsTunnelCHopIndex Integer32,
vRtrMplsTunnelCHopAddrType INTEGER,
vRtrMplsTunnelCHopIpv4Addr IpAddress,
vRtrMplsTunnelCHopIpv4PrefixLen Integer32,
vRtrMplsTunnelCHopIpv6Addr InetAddressIPv6,
vRtrMplsTunnelCHopIpv6PrefixLen Integer32,
vRtrMplsTunnelCHopAsNumber Integer32,
vRtrMplsTunnelCHopLspId MplsLSPID,
vRtrMplsTunnelCHopStrictOrLoose INTEGER,
vRtrMplsTunnelCHopEgressAdmGrp Unsigned32,
vRtrMplsTunnelCHopUnnumIfID Unsigned32,
vRtrMplsTunnelCHopRtrID IpAddress,
vRtrMplsTunnelCHopIsABR TruthValue
}
vRtrMplsTunnelCHopListIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index into this table identifying a particular explicit route
object."
::= { vRtrMplsTunnelCHopEntry 1 }
vRtrMplsTunnelCHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying a particular hop."
::= { vRtrMplsTunnelCHopEntry 2 }
vRtrMplsTunnelCHopAddrType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
ipV4 (1),
ipV6 (2),
asNumber (3),
lspid (4),
unnum (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelCHopAddrType specifies the address type of
this tunnel hop.
When the value of vRtrMplsTunnelCHopAddrType is 'ipv4', it specifies
an IPv4 address type and vRtrMplsTunnelCHopIpv4Addr should be
configured.
When the value of vRtrMplsTunnelCHopAddrType is 'ipv6', it specifies
an IPv6 address type and vRtrMplsTunnelCHopIpv6Addr should be
configured.
When the value of vRtrMplsTunnelCHopAddrType is 'asNumber', it
specifies an AS number and vRtrMplsTunnelCHopAsNumber should be
configured.
When the value of vRtrMplsTunnelCHopAddrType is 'lspid', it specifies
an LSP ID and vRtrMplsTunnelCHopLspId should be configured.
When the value of vRtrMplsTunnelCHopAddrType is 'unnum', it specifies
an unnumbered interface identifier and vRtrMplsTunnelCHopUnnumIfID
should be configured."
DEFVAL { ipV4 }
::= { vRtrMplsTunnelCHopEntry 3 }
vRtrMplsTunnelCHopIpv4Addr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will
contain the IPv4 address of this hop. This object is otherwise
insignificant and should contain a value of 0."
::= { vRtrMplsTunnelCHopEntry 4 }
vRtrMplsTunnelCHopIpv4PrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for
this hop's IPv4 address is contained herein. This object is otherwise
insignificant and should contain a value of 0."
::= { vRtrMplsTunnelCHopEntry 5 }
vRtrMplsTunnelCHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this
variable contains the IPv6 address of this hop. This object is
otherwise insignificant and should contain a value of 0."
::= { vRtrMplsTunnelCHopEntry 6 }
vRtrMplsTunnelCHopIpv6PrefixLen OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will
contain the prefix length for this hop's IPv6 address. This object is
otherwise insignificant and should contain a value of 0."
::= { vRtrMplsTunnelCHopEntry 7 }
vRtrMplsTunnelCHopAsNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value
will contain the AS number of this hop. This object is otherwise
insignificant and should contain a value of 0 to indicate this fact."
::= { vRtrMplsTunnelCHopEntry 8 }
vRtrMplsTunnelCHopLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will
contain the LSPID of a tunnel of this hop. The present tunnel being
configured is tunneled through this hop (using label stacking). This
object is otherwise insignificant and should contain a value of 0 to
indicate this fact."
::= { vRtrMplsTunnelCHopEntry 9 }
vRtrMplsTunnelCHopStrictOrLoose OBJECT-TYPE
SYNTAX INTEGER {
strict (1),
loose (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes whether this tunnel hop is routed in a strict or loose
fashion."
::= { vRtrMplsTunnelCHopEntry 10 }
vRtrMplsTunnelCHopEgressAdmGrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelCHopEgressAdmGrp indicates administrative
groups on the egressing interface at the current hop."
::= { vRtrMplsTunnelCHopEntry 11 }
vRtrMplsTunnelCHopUnnumIfID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelCHopUnnumIfID indicates the unnumbered
interface identifier of this hop.
This object should be used in conjunction with vRtrMplsTunnelCHopRtrID
which would contain the LSR Router ID for the unnumbered interface.
If vRtrMplsTunnelCHopAddrType is set to unnum(5), then this entry is
valid.
This object is otherwise insignificant and should contain a value of 0
to indicate this fact."
::= { vRtrMplsTunnelCHopEntry 12 }
vRtrMplsTunnelCHopRtrID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelCHopRtrID indicates value of the Router ID
for the node when vRtrMplsTunnelCHopAddrType is set to ipV4(1) or
unnum(5)."
::= { vRtrMplsTunnelCHopEntry 13 }
vRtrMplsTunnelCHopIsABR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTunnelCHopIsABR indicates whether the current hop
is an Area Border Router (ABR) or not."
::= { vRtrMplsTunnelCHopEntry 14 }
vRtrMplsAdminGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsAdminGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The vRtrMplsAdminGroupTable has an entry for each administrative group
configured for the virtual router in the system.
Administrative groups are resource constructs that define a link color
or resource class. They provide the ability to classify network
resources (links) into groups or colors based on zones, geographic
location, link location, etc. By doing so, network administrators are
able to do more granular traffic engineering of LSPs."
::= { tmnxMplsObjs 13 }
vRtrMplsAdminGroupEntry OBJECT-TYPE
SYNTAX VRtrMplsAdminGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry in the vRtrMplsAdminGroupTable represents an
administrative group which is simply a mapping between a group name
(an ASCII string) and a group value (a number in the range 0 to 31).
Entries in this table are created and deleted via SNMP SET operations.
An entry is created by setting the value of
vRtrMplsAdminGroupRowStatus to 'createAndWait'. The row status for
this entry can be set to active only once the value of
vRtrMplsAdminGroupValue has been set to a valid number in the range 0
to 31. The entry is destroyed when vRtrMplsAdminGroupRowStatus is set
to 'destroy'."
INDEX {
vRtrID,
IMPLIED vRtrMplsAdminGroupName
}
::= { vRtrMplsAdminGroupTable 1 }
VRtrMplsAdminGroupEntry ::= SEQUENCE
{
vRtrMplsAdminGroupName TNamedItem,
vRtrMplsAdminGroupRowStatus RowStatus,
vRtrMplsAdminGroupValue Integer32
}
vRtrMplsAdminGroupName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsAdminGroupName uniquely identifies the name of
the administrative group within a virtual router instance."
::= { vRtrMplsAdminGroupEntry 1 }
vRtrMplsAdminGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrMplsAdminGroupRowStatus is used to create, delete or control
entries in the vRtrMplsAdminGroupTable. To create a row entry, the row
status should be set to 'createAndWait'. Before the row can be placed
into the 'active' state, vRtrMplsAdminGroupValue must be set to a
value between 0 and 31. To delete a row entry, the row status should
be set to 'destroy'"
::= { vRtrMplsAdminGroupEntry 2 }
vRtrMplsAdminGroupValue OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..31)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsAdminGroupValue specifies the group value
associated with this administrative group. This value is unique within
a virtual router instance.
A value of -1 indicates that the group value for this entry has not
been set."
::= { vRtrMplsAdminGroupEntry 3 }
vRtrMplsFSGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFSGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The vRtrMplsFSGroupTable has an entry for each group that is a part of
the fate sharing database configured for the virtual router in the
system.
A fate sharing group is used to define a group of links and nodes in
the network that share common risk attributes. To minimize a single
point of failure, backup paths can be created that not only avoid the
nodes and links of the primary path but also any other nodes and links
that share risk with the nodes and links of the primary path."
::= { tmnxMplsObjs 14 }
vRtrMplsFSGroupEntry OBJECT-TYPE
SYNTAX VRtrMplsFSGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry in the vRtrMplsFSGroupTable represents a fate sharing
group which is a database of nodes and links that share common risk
attributes.
Entries in this table are created and deleted via SNMP SET operations.
An entry is created by setting the value of vRtrMplsFSGroupRowStatus
to 'createAndGo'. An entry can be deleted by setting
vRtrMplsFSGroupRowStatus to 'destroy'."
INDEX {
vRtrID,
vRtrMplsFSGroupName
}
::= { vRtrMplsFSGroupTable 1 }
VRtrMplsFSGroupEntry ::= SEQUENCE
{
vRtrMplsFSGroupName TNamedItem,
vRtrMplsFSGroupRowStatus RowStatus,
vRtrMplsFSGroupCost Unsigned32
}
vRtrMplsFSGroupName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsFSGroupName uniquely identifies the name of the
fate sharing group within a virtual router instance."
::= { vRtrMplsFSGroupEntry 1 }
vRtrMplsFSGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrMplsFSGroupRowStatus is used to create, delete or control entries
in the vRtrMplsFSGroupTable. To create a row entry, the row status
should be set to 'createAndGo'. To delete a row entry, the row status
should be set to 'destroy'"
::= { vRtrMplsFSGroupEntry 2 }
vRtrMplsFSGroupCost OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsFSGroupCost specifies the cost assigned to the
fate sharing group. This cost is applied to all nodes and links that
are part of this group and used for CSPF calculations. The higher the
cost of the node or link, the lesser its chance of being selected as
part of the path."
DEFVAL { 1 }
::= { vRtrMplsFSGroupEntry 3 }
vRtrMplsFSGroupParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFSGroupParamsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The vRtrMplsFSGroupParamsTable has an entry for each node or link that
is part of a fate sharing group on this virtual router."
::= { tmnxMplsObjs 15 }
vRtrMplsFSGroupParamsEntry OBJECT-TYPE
SYNTAX VRtrMplsFSGroupParamsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry in the vRtrMplsFSGroupParamsTable represents either a
node or a link that is a part of a fate sharing group defined in the
vRtrMplsFSGroupTable.
Entries in this table are created and deleted via SNMP SET operations.
An entry is created by setting the value of
vRtrMplsFSGroupParamsRowStatus to 'createAndGo'. An entry can be
deleted by setting vRtrMplsFSGroupParamsRowStatus to 'destroy'.
To configure a node to be part of the group, create an entry in this
table with vRtrMplsFSGroupParamsFromAddr set to a valid non-zero IP
address and vRtrMplsFSGroupParamsToAddr set to 0. To configure a link
to be part of the group, create an entry in this table with both
vRtrMplsFSGroupParamsFromAddr and vRtrMplsFSGroupParamsToAddr set to
valid non-zero IP addresses."
INDEX {
vRtrID,
vRtrMplsFSGroupName,
vRtrMplsFSGroupParamsFromAddr,
vRtrMplsFSGroupParamsToAddr
}
::= { vRtrMplsFSGroupParamsTable 1 }
VRtrMplsFSGroupParamsEntry ::= SEQUENCE
{
vRtrMplsFSGroupParamsFromAddr IpAddress,
vRtrMplsFSGroupParamsToAddr IpAddress,
vRtrMplsFSGroupParamsRowStatus RowStatus
}
vRtrMplsFSGroupParamsFromAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsFSGroupParamsFromAddr along with the value of
vRtrMplsFSGroupParamsToAddr uniquely identifies a link or node within
a fate sharing group.
This value must be non-zero for all row entries whether it represents
a node or a link."
::= { vRtrMplsFSGroupParamsEntry 1 }
vRtrMplsFSGroupParamsToAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsFSGroupParamsToAddr along with the value of
vRtrMplsFSGroupParamsFromAddr uniquely identifies a link or node
within a fate sharing group.
This value must be 0 for row entries that represent a node and must be
non-zero for row entries that represent a link."
::= { vRtrMplsFSGroupParamsEntry 2 }
vRtrMplsFSGroupParamsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrMplsFSGroupParamsRowStatus is used to create, delete or control
entries in the vRtrMplsFSGroupParamsTable. To create a row entry, the
row status should be set to 'createAndGo'. To delete a row entry, the
row status should be set to 'destroy'"
::= { vRtrMplsFSGroupParamsEntry 3 }
tmnxMplsNotificationObjects OBJECT IDENTIFIER ::= { tmnxMplsObjs 16 }
vRtrMplsLspNotificationReasonCode OBJECT-TYPE
SYNTAX INTEGER {
noError (0),
noPathIsOperational (1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by vRtrMplsLspDown, the value indicates the reason for the LSP
going down."
::= { tmnxMplsNotificationObjects 1 }
vRtrMplsLspPathNotificationReasonCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by vRtrMplsLspPathDown, the value indicates the reason for the
LSP path going down."
::= { tmnxMplsNotificationObjects 2 }
vRtrMplsNotifyRow OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"used by Nokia SROS series MPLS Configuration change Notifications, the
object ID indicates the MPLS table and entry."
::= { tmnxMplsNotificationObjects 3 }
vRtrMplsP2mpInstNotifIndex OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique value which identifies this Point to Multipoint Labeled
Switch Path (P2MP LSP) for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same value of vRtrID."
::= { tmnxMplsNotificationObjects 4 }
vRtrMplsP2mpInstNotifReasonCode OBJECT-TYPE
SYNTAX TmnxMplsP2mpInstFailCode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by vRtrMplsP2mpInstanceDown, the value indicates the reason for
the P2MP instance going down."
::= { tmnxMplsNotificationObjects 5 }
vRtrMplsS2lSubLspNtDstAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspNtDstAddrType indicates the type of
vRtrMplsS2lSubLspNtDstAddr."
::= { tmnxMplsNotificationObjects 6 }
vRtrMplsS2lSubLspNtDstAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspNtDstAddr indicates the IP address of
the destination address of the S2L sub LSP. "
::= { tmnxMplsNotificationObjects 7 }
vRtrMplsLspPathCongChgPercent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathCongChgPercent indicates the percentage
change in congestion. "
::= { tmnxMplsNotificationObjects 8 }
vRtrMplsLspPathMbbStatus OBJECT-TYPE
SYNTAX INTEGER {
successful (0),
failed (1),
aborted (2),
ignored (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMbbStatus indicates the status of the
make-before-break (MBB) operation for the LSP path."
::= { tmnxMplsNotificationObjects 9 }
vRtrMplsLspPathMbbReasonCode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
mbbRetryExceeded (1),
lspPathGoingDown (2),
startingHighPriMbb (3),
restartingMbb (4),
mbbAlreadyInProg (5),
lspPceControlled (6),
lspNotPceControlled (7),
lspTypeNotSupported (8)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathMbbReasonCode indicates the reason code
for the make-before-break (MBB) operation of the LSP path. It
indicates whether the operation is failed, aborted or ignored."
::= { tmnxMplsNotificationObjects 10 }
vRtrMplsLspSwitchStbyReasonCode OBJECT-TYPE
SYNTAX INTEGER {
none (0),
lspIsDown (1),
lspIsNotDynamic (2),
lspHasNoActivePath (3),
lspActivePathIsNotStandby (4),
pathSpecifiedIsNotLspPath (5),
pathSpecifiedIsNotStandby (6),
pathSpecifiedIsDown (7),
pathHasDiffPrefThanActLspPath (8),
lspHoldTimerIsRunning (9),
currentLspPathActiveByForce (10),
lspPathInPreemption (11),
lspActivePathIsPrimary (12),
currentActivePathIsBest (13),
betterPathFound (14),
currentActivePathWentDown (15),
lspPathIsDegraded (16),
lspAlreadyManuallySwitched (17)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspSwitchStbyReasonCode indicates the reason for
the failure of switch to a new standby path from the current active
standby path."
::= { tmnxMplsNotificationObjects 13 }
vRtrMplsLspOldTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspOldTunnelIndex indicates the tunnel index of
of the old LSP path."
::= { tmnxMplsNotificationObjects 14 }
vRtrMplsXCNotifRednIndicesBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1000))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsXCNotifRednIndicesBitMap indicates the RSVP
sessions that either changed state and retained the changed state for
the entire quiet interval of 2 minutes or the RSVP sessions that
changed state during multiple intervals until a maximum interval of 10
minutes has elapsed.
Each bit location in vRtrMplsXCNotifRednIndicesBitMap corresponds to a
created or deleted row entry in vRtrMplsXCTable as identified by the
value of vRtrMplsXCIndex. This index is same as the value of
TIMETRA-RSVP-MIB::vRtrRsvpSessionIndex which corresponds to a created
or deleted RSVP session entry in
TIMETRA-RSVP-MIB::vRtrRsvpSessionTable.
The value of vRtrMplsXCNotifyRednStartIndex indicates the index value
of the first affected row entry represented by bit 0, the most
significant bit.
If the value of vRtrMplsXCNotifyRednBundlingType is set to 'create
(2)', all the bits set in vRtrMplsXCNotifRednIndicesBitMap represent
created RSVP sessions. If the value of
vRtrMplsXCNotifyRednBundlingType is set to 'delete (1)', all the bits
set in vRtrMplsXCNotifRednIndicesBitMap represent deleted RSVP
sessions."
::= { tmnxMplsNotificationObjects 15 }
vRtrMplsXCNotifyRednBundlingType OBJECT-TYPE
SYNTAX INTEGER {
delete (1),
create (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsXCNotifyRednBundlingType indicates whether this
notification is generated for deletion or creation of RSVP sessions on
this ingress, transit or egress router instance."
::= { tmnxMplsNotificationObjects 16 }
vRtrMplsXCNotifyRednNumOfBitsSet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsXCNotifyRednNumOfBitsSet indicates the total
number of bits set in vRtrMplsXCNotifRednIndicesBitMap."
::= { tmnxMplsNotificationObjects 17 }
vRtrMplsXCNotifyRednStartIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsXCNotifyRednStartIndex indicates which
vRtrMplsXCIndex is represented by the first bit in
vRtrMplsXCNotifRednIndicesBitMap."
::= { tmnxMplsNotificationObjects 18 }
vRtrMplsXCNotifyRednEndIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsXCNotifyRednEndIndex indicates which
vRtrMplsXCIndex is represented by the last bit in
vRtrMplsXCNotifRednIndicesBitMap.
The value vRtrMplsXCNotifyRednEndIndex can be useful for a sanity
check of vRtrMplsXCNotifyRednNumOfBitsSet.
vRtrMplsXCNotifyRednNumOfBitsSet. = (vRtrMplsXCNotifyRednEndIndex -
vRtrMplsXCNotifyRednStartIndex + 1)."
::= { tmnxMplsNotificationObjects 19 }
vRtrMplsIgpOverloadRtrAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsIgpOverloadRtrAddrType indicates the address type
of vRtrMplsIgpOverloadRtrAddr."
::= { tmnxMplsNotificationObjects 20 }
vRtrMplsIgpOverloadRtrAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsIgpOverloadRtrAddr indicates the IP address of
the router that is in IGP overload state."
::= { tmnxMplsNotificationObjects 21 }
vRtrMplsIgpOverloadIgpType OBJECT-TYPE
SYNTAX INTEGER {
isis (1),
ospf (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsIgpOverloadIgpType indicates IGP which is
notifying MPLS that a node is in the overload state."
::= { tmnxMplsNotificationObjects 22 }
vRtrMplsResourceType OBJECT-TYPE
SYNTAX INTEGER {
egressStatistics (1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsResourceType indicates various CPM/IOM resource
used by MPLS."
::= { tmnxMplsNotificationObjects 23 }
vRtrMplsLspManualSwFailReason OBJECT-TYPE
SYNTAX INTEGER {
none (0),
lspIsDown (1),
lspActivePathChanged (2),
lspRevertOrHoldTimerIsRunning (3),
lspIsAlreadyManuallySwitched (4),
lspIsNotManuallySwitched (5),
lspHasInsufficientPaths (6),
lspActivePathIsSecondary (7),
lspActivePathIsActiveByForce (8)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspManualSwFailReason indicates the reason for
the failure of manually triggered active path switch."
::= { tmnxMplsNotificationObjects 24 }
vRtrMplsLspPathManDegState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathManDegState indicates whether the LSP path
manually degraded or not. When value of vRtrMplsLspPathManDegState is
'true', the LSP path is manually degraded. When value of
vRtrMplsLspPathDegraded is 'false', the LSP path is not manually
degraded."
::= { tmnxMplsNotificationObjects 25 }
vRtrMplsLabelRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLabelRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLabelRangeTable has an entry for each type of label, the
minimum and maximum value in the label range and information on total
available and aging labels in each range.
This is a read-only table."
::= { tmnxMplsObjs 17 }
vRtrMplsLabelRangeEntry OBJECT-TYPE
SYNTAX VRtrMplsLabelRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrMplsLabelRangeTable represents a type of
label. Each entry contains the label range used by that label type and
the number of aging and allocated labels in the range."
INDEX { vRtrMplsLabelType }
::= { vRtrMplsLabelRangeTable 1 }
VRtrMplsLabelRangeEntry ::= SEQUENCE
{
vRtrMplsLabelType INTEGER,
vRtrMplsLabelRangeMin Unsigned32,
vRtrMplsLabelRangeMax Unsigned32,
vRtrMplsLabelRangeAging Unsigned32,
vRtrMplsLabelRangeAvailable Unsigned32
}
vRtrMplsLabelType OBJECT-TYPE
SYNTAX INTEGER {
staticLsp (1),
staticSvc (2),
dynamic (3),
segmentRoute (4),
static (5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelType specifies the type of label and is the
index for this table."
::= { vRtrMplsLabelRangeEntry 1 }
vRtrMplsLabelRangeMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelRangeMin indicates the minimum label value
in the range for a particular label type."
::= { vRtrMplsLabelRangeEntry 2 }
vRtrMplsLabelRangeMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelRangeMax indicates the maximum label value
in the range for a particular label type."
::= { vRtrMplsLabelRangeEntry 3 }
vRtrMplsLabelRangeAging OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelRangeAging represents the number of labels
that are currently allocated and aging."
::= { vRtrMplsLabelRangeEntry 4 }
vRtrMplsLabelRangeAvailable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelRangeAvailable represents the number of
labels that are currently available for each label type."
::= { vRtrMplsLabelRangeEntry 5 }
vRtrMplsStaticLSPLabelTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsStaticLSPLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsStaticLSPLabelTable has an entry for each allocated label
that is part of the static LSP label range. This is a read-only table."
::= { tmnxMplsObjs 18 }
vRtrMplsStaticLSPLabelEntry OBJECT-TYPE
SYNTAX VRtrMplsStaticLSPLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrMplsStaticLSPLabelTable represents a label
of type static LSP that is currently allocated. The entry includes
information about the current owner for that label."
INDEX { vRtrMplsStaticLSPLabel }
::= { vRtrMplsStaticLSPLabelTable 1 }
VRtrMplsStaticLSPLabelEntry ::= SEQUENCE
{
vRtrMplsStaticLSPLabel MplsLabel,
vRtrMplsStaticLSPLabelOwner TmnxMplsLabelOwner
}
vRtrMplsStaticLSPLabel OBJECT-TYPE
SYNTAX MplsLabel (32..262112)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsStaticLSPLabel specifies the label value for a
static LSP.
The range of vRtrMplsStaticLSPLabel is dynamic and depends on the
value of vRtrMplsLabelStaticLabelRange.
The normal range of vRtrMplsStaticLSPLabel starts at 32 and ends at
the value of vRtrMplsLabelStaticLabelRange + 32."
::= { vRtrMplsStaticLSPLabelEntry 1 }
vRtrMplsStaticLSPLabelOwner OBJECT-TYPE
SYNTAX TmnxMplsLabelOwner
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsStaticLSPLabelOwner indicates the owner for the
label value vRtrMplsStaticLSPLabel."
::= { vRtrMplsStaticLSPLabelEntry 2 }
vRtrMplsStaticSvcLabelTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsStaticSvcLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsStaticSvcLabelTable has an entry for each allocated label
that is part of the static service label range. This is a read-only
table."
::= { tmnxMplsObjs 19 }
vRtrMplsStaticSvcLabelEntry OBJECT-TYPE
SYNTAX VRtrMplsStaticSvcLabelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrMplsStaticSvcLabelTable represents a label
of type static-svc that is currently allocated. The entry includes
information about the current owner for that label."
INDEX { vRtrMplsStaticSvcLabel }
::= { vRtrMplsStaticSvcLabelTable 1 }
VRtrMplsStaticSvcLabelEntry ::= SEQUENCE
{
vRtrMplsStaticSvcLabel MplsLabel,
vRtrMplsStaticSvcLabelOwner TmnxMplsLabelOwner
}
vRtrMplsStaticSvcLabel OBJECT-TYPE
SYNTAX MplsLabel (32..262112)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsStaticSvcLabel specifies the label value for a
static SVC.
The range of vRtrMplsStaticSvcLabel is dynamic and depends on the
value of vRtrMplsLabelStaticLabelRange.
The range for vRtrMplsStaticSvcLabel starts at 32 and ends at 32 +
vRtrMplsLabelStaticLabelRange."
::= { vRtrMplsStaticSvcLabelEntry 1 }
vRtrMplsStaticSvcLabelOwner OBJECT-TYPE
SYNTAX TmnxMplsLabelOwner
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsStaticSvcLabelOwner specifies the owner for the
label value vRtrMplsStaticSvcLabel."
DEFVAL { none }
::= { vRtrMplsStaticSvcLabelEntry 2 }
vRtrMplsSrlgGrpTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsSrlgGrpTableLastChanged indicates the sysUpTime
at the time of the last modification to vRtrMplsSrlgGrpTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 20 }
vRtrMplsSrlgGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsSrlgGrpEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link Groups
(SRLG) group configured for MPLS in the system."
::= { tmnxMplsObjs 21 }
vRtrMplsSrlgGrpEntry OBJECT-TYPE
SYNTAX VRtrMplsSrlgGrpEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry represents a SRLG group on this virtual router
that participates in the MPLS protocol. A row can be created
or deleted via SNMP SET requests."
INDEX {
vRtrID,
IMPLIED vRtrMplsSrlgGrpName
}
::= { vRtrMplsSrlgGrpTable 1 }
VRtrMplsSrlgGrpEntry ::= SEQUENCE
{
vRtrMplsSrlgGrpName TNamedItem,
vRtrMplsSrlgGrpRowStatus RowStatus,
vRtrMplsSrlgGrpLastChanged TimeStamp,
vRtrMplsSrlgGrpValue Unsigned32
}
vRtrMplsSrlgGrpName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsSrlgGrpName indicates the SRLG group name."
::= { vRtrMplsSrlgGrpEntry 1 }
vRtrMplsSrlgGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrMplsSrlgGrpRowStatus is used to create, delete or
control entries in the vRtrMplsSrlgGrpTable. A value must
also be set for vRtrMplsSrlgGrpValue before the row entry can
transition to the 'active' state."
::= { vRtrMplsSrlgGrpEntry 2 }
vRtrMplsSrlgGrpLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgGrpTable."
::= { vRtrMplsSrlgGrpEntry 3 }
vRtrMplsSrlgGrpValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsSrlgGrpValue specifies the group value
associated with vRtrMplsSrlgGrpName. This value is unique
within a virtual router instance.
At the time of row creation, a value for vRtrMplsSrlgGrpValue must be
specified or else row creation would fail."
::= { vRtrMplsSrlgGrpEntry 4 }
vRtrMplsIfSrlgGrpTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsIfSrlgGrpTblLastChanged indicates the sysUpTime
at the time of the last modification to vRtrMplsIfSrlgGrpTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 22 }
vRtrMplsIfSrlgGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsIfSrlgGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk Link
Group (SRLG) groups associated with a router interface configured for
MPLS in the system."
::= { tmnxMplsObjs 23 }
vRtrMplsIfSrlgGrpEntry OBJECT-TYPE
SYNTAX VRtrMplsIfSrlgGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an SRLG group associated with a interface on
this virtual router that participates in the MPLS protocol.
A row can be created or deleted via SNMP SET requests."
INDEX {
vRtrID,
vRtrIfIndex,
IMPLIED vRtrMplsIfSrlgGrpName
}
::= { vRtrMplsIfSrlgGrpTable 1 }
VRtrMplsIfSrlgGrpEntry ::= SEQUENCE
{
vRtrMplsIfSrlgGrpName TNamedItem,
vRtrMplsIfSrlgGrpRowStatus RowStatus,
vRtrMplsIfSrlgGrpLastChanged TimeStamp
}
vRtrMplsIfSrlgGrpName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsIfSrlgGrpName indicates the SRLG group name."
::= { vRtrMplsIfSrlgGrpEntry 1 }
vRtrMplsIfSrlgGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrMplsIfSrlgGrpRowStatus is used to create, delete or control
entries in the vRtrMplsIfSrlgGrpTable."
::= { vRtrMplsIfSrlgGrpEntry 2 }
vRtrMplsIfSrlgGrpLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp of
last change to this row in vRtrMplsIfSrlgGrpTable."
::= { vRtrMplsIfSrlgGrpEntry 3 }
vRtrMplsP2mpInstTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstTblLastChanged indicates the sysUpTime at
the time of the last modification to vRtrMplsP2mpInstTable by adding,
deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 24 }
vRtrMplsP2mpInstTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsP2mpInstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrMplsP2mpInstTable contains configuration information for the Mpls
Point to Multipoint (P2MP) Instance on a virtual router."
::= { tmnxMplsObjs 25 }
vRtrMplsP2mpInstEntry OBJECT-TYPE
SYNTAX VRtrMplsP2mpInstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrMplsP2mpInstEntry is an entry (conceptual row) in the
vRtrMplsP2mpInstTable. Each entry represents the configuration for a
Mpls Point to Multipoint (P2MP) Instance.
Entries in this table can be created and deleted via SNMP SET
operations. "
INDEX {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstIndex
}
::= { vRtrMplsP2mpInstTable 1 }
VRtrMplsP2mpInstEntry ::= SEQUENCE
{
vRtrMplsP2mpInstIndex TmnxVRtrMplsLspID,
vRtrMplsP2mpInstRowStatus RowStatus,
vRtrMplsP2mpInstLastChange TimeStamp,
vRtrMplsP2mpInstName TNamedItemOrEmpty,
vRtrMplsP2mpInstType INTEGER,
vRtrMplsP2mpInstProperties BITS,
vRtrMplsP2mpInstBandwidth TmnxMplsLspBandwidth,
vRtrMplsP2mpInstState INTEGER,
vRtrMplsP2mpInstSetupPriority Unsigned32,
vRtrMplsP2mpInstHoldPriority Unsigned32,
vRtrMplsP2mpInstRecord TruthValue,
vRtrMplsP2mpInstHopLimit Unsigned32,
vRtrMplsP2mpInstAdminState TmnxAdminState,
vRtrMplsP2mpInstOperState TmnxOperState,
vRtrMplsP2mpInstInheritance Unsigned32,
vRtrMplsP2mpInstLspId MplsLSPID,
vRtrMplsP2mpInstNegotiatedMTU Unsigned32,
vRtrMplsP2mpInstFailCode TmnxMplsLspFailCode,
vRtrMplsP2mpInstFailNodeArType InetAddressType,
vRtrMplsP2mpInstFailNodeAddr InetAddress,
vRtrMplsP2mpInstAdminGrpInclude Unsigned32,
vRtrMplsP2mpInstAdminGrpExclude Unsigned32,
vRtrMplsP2mpInstAdaptive TruthValue,
vRtrMplsP2mpInstOperBandwidth Integer32,
vRtrMplsP2mpInstResignal TmnxActionType,
vRtrMplsP2mpInstOperMTU Unsigned32,
vRtrMplsP2mpInstRecordLabel INTEGER,
vRtrMplsP2mpInstLastResigAttpt TimeStamp,
vRtrMplsP2mpInstMetric Unsigned32,
vRtrMplsP2mpInstLastMBBType TmnxMplsMBBType,
vRtrMplsP2mpInstLastMBBEnd TimeStamp,
vRtrMplsP2mpInstLastMBBMetric Unsigned32,
vRtrMplsP2mpInstLastMBBState INTEGER,
vRtrMplsP2mpInstMBBTypeInProg TmnxMplsMBBType,
vRtrMplsP2mpInstMBBStarted TimeStamp,
vRtrMplsP2mpInstMBBNextRetry Unsigned32,
vRtrMplsP2mpInstMBBRetryAttpts Unsigned32,
vRtrMplsP2mpInstMBBFailCode TmnxMplsLspFailCode,
vRtrMplsP2mpInstMBBFailNodeType InetAddressType,
vRtrMplsP2mpInstMBBFailNodeAddr InetAddress
}
vRtrMplsP2mpInstIndex OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique value which identifies this Point to Multipoint Labeled
Switch Path (P2MP LSP) for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same value of vRtrID."
::= { vRtrMplsP2mpInstEntry 1 }
vRtrMplsP2mpInstRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrMplsP2mpInstRowStatus is used to create, delete or control entries
in the vRtrMplsP2mpInstTable."
::= { vRtrMplsP2mpInstEntry 2 }
vRtrMplsP2mpInstLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLastChange indicates the timestamp of
last change to this row in vRtrMplsP2mpInstTable."
::= { vRtrMplsP2mpInstEntry 3 }
vRtrMplsP2mpInstName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstName specifies the administrative name
for the P2MP instance which must be unique within a virtual router
instance."
::= { vRtrMplsP2mpInstEntry 4 }
vRtrMplsP2mpInstType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
primary (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstType specifies the type of P2MP LSP
instance."
DEFVAL { primary }
::= { vRtrMplsP2mpInstEntry 5 }
vRtrMplsP2mpInstProperties OBJECT-TYPE
SYNTAX BITS {
recordRoute (0),
adaptive (1),
cspf (2),
mergeable (3),
fastReroute (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstProperties indicates the set of configured
properties for this path expressed as a bit map. For example, if the
path is an adaptive path, the bit corresponding to bit value 1 is set."
::= { vRtrMplsP2mpInstEntry 6 }
vRtrMplsP2mpInstBandwidth OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstBandwidth specifies the amount of
bandwidth in megabits per second (Mbps) to be reserved for the P2MP
LSP."
DEFVAL { 0 }
::= { vRtrMplsP2mpInstEntry 7 }
vRtrMplsP2mpInstState OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
active (2),
inactive (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstState indicates the current working state
of this path within this P2MP LSP."
::= { vRtrMplsP2mpInstEntry 8 }
vRtrMplsP2mpInstSetupPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstSetupPriority indicates the setup
priority to use when insufficient bandwidth is available to setup a
P2MP LSP. The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold priority
of the established LSPs, this P2MP LSP may preempt the other LSPs. A
value of zero (0) is the highest priority and a value of seven (7) is
the lowest priority."
DEFVAL { 7 }
::= { vRtrMplsP2mpInstEntry 9 }
vRtrMplsP2mpInstHoldPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstHoldPriority indicates the hold
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared against the hold priority
of existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this P2MP LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority."
DEFVAL { 0 }
::= { vRtrMplsP2mpInstEntry 10 }
vRtrMplsP2mpInstRecord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstRecord specifies whether recording of all
hops that a P2MP LSP traverses is enabled. When the value of
vRtrMplsP2mpInstRecord is 'true', recording of all the hops that a
P2MP LSP traverses is enabled.
When the value of vRtrMplsP2mpInstRecord is 'false, recording of all
the hops that a P2MP LSP traverses is disabled."
DEFVAL { true }
::= { vRtrMplsP2mpInstEntry 11 }
vRtrMplsP2mpInstHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (2..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstHopLimit specifies the maximum number
of hops that a P2MP LSP will traverse including the ingress and
egress ESRs. A P2MP LSP will not be setup if the hop limit is
exceeded.
When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance
is cleared (0), the value returned to a GET request is inherited from
vRtrMplsLspHopLimit."
DEFVAL { 255 }
::= { vRtrMplsP2mpInstEntry 12 }
vRtrMplsP2mpInstAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstAdminState specifies desired
administrative state for this P2MP LSP."
DEFVAL { inService }
::= { vRtrMplsP2mpInstEntry 13 }
vRtrMplsP2mpInstOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstOperState indicates the current
operational state of this P2MP LSP."
::= { vRtrMplsP2mpInstEntry 14 }
vRtrMplsP2mpInstInheritance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstInheritance specifies whether or not
each writable object in this row inherits its value from its
corresponding object in the vRtrMplsLspTable. This object controls
whether to inherit the operational value of that associated object,
or use the administrative value configured in this row.
Non mask bits will always have value of zero, and any attempt to
change the value will be silently discarded.
This object is a bit-mask, with the following positions:
vRtrMplsP2mpInstHopLimit 0x40
vRtrMplsP2mpInstAdminGrpInclude 0x200
vRtrMplsP2mpInstAdminGrpExclude 0x400
vRtrMplsP2mpInstAdaptive 0x800
When the bit for an object is set to one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value is. The corresponding mask bit will be changed to
one when SNMP SET is performed on any of the inherited objects
(vRtrMplsP2mpInstHopLimit, vRtrMplsP2mpInstAdminGrpInclude, etc).
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrMplsLspTable."
DEFVAL { 0 }
::= { vRtrMplsP2mpInstEntry 15 }
vRtrMplsP2mpInstLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLspId indicates the value which
identifies the label switched path that is signaled for this entry."
::= { vRtrMplsP2mpInstEntry 16 }
vRtrMplsP2mpInstNegotiatedMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP path."
::= { vRtrMplsP2mpInstEntry 17 }
vRtrMplsP2mpInstFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred."
::= { vRtrMplsP2mpInstEntry 18 }
vRtrMplsP2mpInstFailNodeArType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstFailNodeArType indicates the type of
vRtrMplsP2mpInstFailNodeAddr. When no failure has occurred,
vRtrMplsP2mpInstFailNodeArType is 0."
::= { vRtrMplsP2mpInstEntry 19 }
vRtrMplsP2mpInstFailNodeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstFailNodeAddr indicates the IP address of
the node in the P2MP LSP path at which the P2MP LSP path failed."
::= { vRtrMplsP2mpInstEntry 20 }
vRtrMplsP2mpInstAdminGrpInclude OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstAdminGrpInclude is a bit-map that
specifies a list of admin groups that should be included when this
P2MP LSP is setup. If bit 'n' is set, then the admin group with value
'n' is included for this P2MP LSP. This implies that each link that
this P2MP LSP goes through must be associated with at least one of the
admin groups in the include list.
By default, all admin groups are in the include list."
DEFVAL { '00000000'H }
::= { vRtrMplsP2mpInstEntry 21 }
vRtrMplsP2mpInstAdminGrpExclude OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstAdminGrpExclude is a bit-map that
specifies a list of admin groups that should be excluded when this
P2MP LSP is setup. If bit 'n' is set, then the admin group with value
'n' is excluded for this P2MP LSP. This implies that each link that
this P2MP LSP goes through must not be associated with any of the
admin groups in the exclude list.
By default, no admin groups are in the exclude list."
DEFVAL { '00000000'H }
::= { vRtrMplsP2mpInstEntry 22 }
vRtrMplsP2mpInstAdaptive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstAdaptive specifies whether
make-before-break functionality is enabled. If the value of
vRtrMplsP2mpInstAdaptive is set to 'true', it enables
make-before-break functionality for the P2MP LSP.
When the attributes of an already established P2MP LSP are changed,
either through manual configuration or due to a change in network
topology, make-before-break functionality ensures that the resources
of the existing P2MP LSP will not be released until a new path (with
the same P2MP LSP Id) has been established and traffic flowing over
the existing path is seamlessly transferred to the new path.
If the value of vRtrMplsP2mpInstAdaptive is set to 'false', it
disables make-before-break functionality."
DEFVAL { true }
::= { vRtrMplsP2mpInstEntry 23 }
vRtrMplsP2mpInstOperBandwidth OBJECT-TYPE
SYNTAX Integer32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP LSP path.
When make-before-break functionality for the P2MP LSP is enabled and
if the path bandwidth is changed, the resources allocated to the
existing P2MP LSP paths will not be released until a new path with the
new bandwidth settings has been established. While a new path is being
signaled, the administrative value and the operational values of the
path bandwidth may differ. The value of vRtrMplsP2mpInstBandwidth
specifies the bandwidth requirements for the new P2MP LSP path trying
to be established whereas the value of vRtrMplsP2mpInstOperBandwidth
specifies the bandwidth reserved for the existing P2MP LSP path."
::= { vRtrMplsP2mpInstEntry 24 }
vRtrMplsP2mpInstResignal OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value of vRtrMplsP2mpInstResignal to 'doAction' triggers
the resignaling of the P2MP LSP path.
If the P2MP LSP path is operationally down either due to network
failure or due to the retry attempts count being exceeded, setting
this variable to 'doAction' will initiate the signaling for the path.
A make-before-break signaling for the path will be initiated if the
P2MP LSP is operationally up but the make-before-break retry attempts
count was exceeded. Make-before-break signaling will also be initiated
for any P2MP LSP that is operationally up. This may be used to cause a
loose-hop P2MP LSP to be optimized.
If a resignal is triggered while a resignaling is already in progress,
the old transient state will be destroyed and a new transaction being
triggered.
An SNMP GET request on this object should return 'notApplicable'."
DEFVAL { notApplicable }
::= { vRtrMplsP2mpInstEntry 25 }
vRtrMplsP2mpInstOperMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstOperMTU indicates the size for the
Maximum transmission unit (MTU) that is currently in operation for
this P2MP LSP Path."
::= { vRtrMplsP2mpInstEntry 26 }
vRtrMplsP2mpInstRecordLabel OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstRecordLabel specifies when the value of
vRtrMplsP2mpInstRecordLabel is 'record', recording of labels at each
node that a P2MP LSP traverses is enabled.
When the value of vRtrMplsP2mpInstRecordLabel is 'noRecord', recording
of labels at each node that a P2MP LSP traverses is disabled."
DEFVAL { record }
::= { vRtrMplsP2mpInstEntry 27 }
vRtrMplsP2mpInstLastResigAttpt OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this P2MP LSP was made."
::= { vRtrMplsP2mpInstEntry 28 }
vRtrMplsP2mpInstMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMetric indicates the cost of the traffic
engineered path returned by the IGP."
::= { vRtrMplsP2mpInstEntry 29 }
vRtrMplsP2mpInstLastMBBType OBJECT-TYPE
SYNTAX TmnxMplsMBBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted."
::= { vRtrMplsP2mpInstEntry 30 }
vRtrMplsP2mpInstLastMBBEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLastMBBEnd indicates the sysUpTime when
the last MBB ended."
::= { vRtrMplsP2mpInstEntry 31 }
vRtrMplsP2mpInstLastMBBMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLastMBBMetric indicates the
cost of the traffic engineered path for the P2MP LSP path prior to
MBB."
::= { vRtrMplsP2mpInstEntry 32 }
vRtrMplsP2mpInstLastMBBState OBJECT-TYPE
SYNTAX INTEGER {
none (1),
success (2),
fail (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break successful
fail (3) - make-before-break failed."
::= { vRtrMplsP2mpInstEntry 33 }
vRtrMplsP2mpInstMBBTypeInProg OBJECT-TYPE
SYNTAX TmnxMplsMBBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress."
::= { vRtrMplsP2mpInstEntry 34 }
vRtrMplsP2mpInstMBBStarted OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBStarted indicates the sysUpTime when
the in-progress MBB started."
::= { vRtrMplsP2mpInstEntry 35 }
vRtrMplsP2mpInstMBBNextRetry OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB."
::= { vRtrMplsP2mpInstEntry 36 }
vRtrMplsP2mpInstMBBRetryAttpts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress."
::= { vRtrMplsP2mpInstEntry 37 }
vRtrMplsP2mpInstMBBFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred."
::= { vRtrMplsP2mpInstEntry 38 }
vRtrMplsP2mpInstMBBFailNodeType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBFailNodeType indicates the type of
vRtrMplsP2mpInstMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred."
::= { vRtrMplsP2mpInstEntry 39 }
vRtrMplsP2mpInstMBBFailNodeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstMBBFailNodeAddr indicates the IP address
of the node in the P2MP LSP path at which the in-progress MBB failed.
A value of 'unknown' for vRtrMplsP2mpInstMBBFailNodeType and empty
string for vRtrMplsP2mpInstMBBFailNodeAddr indicates that no failure
has occurred."
::= { vRtrMplsP2mpInstEntry 40 }
vRtrMplsP2mpInstStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsP2mpInstStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsP2mpInstStatTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system."
::= { tmnxMplsObjs 26 }
vRtrMplsP2mpInstStatEntry OBJECT-TYPE
SYNTAX VRtrMplsP2mpInstStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for a P2MP
Labeled Switch Path (LSP) configured for a virtual router in the
system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsP2mpInstEntry }
::= { vRtrMplsP2mpInstStatTable 1 }
VRtrMplsP2mpInstStatEntry ::= SEQUENCE
{
vRtrMplsP2mpInstStatS2lChanges Counter32,
vRtrMplsP2mpInstStatLastS2lChange TmnxTimeInterval,
vRtrMplsP2mpInstStatConfiguredS2ls Gauge32,
vRtrMplsP2mpInstStatOperationalS2ls Gauge32,
vRtrMplsP2mpInstStatLastS2lTimeUp TmnxTimeInterval,
vRtrMplsP2mpInstStatLastS2lTimeDown TmnxTimeInterval,
vRtrMplsP2mpInstStatTimeUp TmnxTimeInterval,
vRtrMplsP2mpInstStatTimeDown TmnxTimeInterval,
vRtrMplsP2mpInstStatTransitions Counter32,
vRtrMplsP2mpInstStatLastTrans TmnxTimeInterval
}
vRtrMplsP2mpInstStatS2lChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatS2lChanges indicates the number of
S2l changes this P2MP LSP has had. For every S2l change (S2l down, S2l
up, S2l change), a corresponding syslog/trap (if enabled) is generated
for it."
::= { vRtrMplsP2mpInstStatEntry 1 }
vRtrMplsP2mpInstStatLastS2lChange OBJECT-TYPE
SYNTAX TmnxTimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatLastS2lChange indicates the time
since the last change occurred on this P2MP LSP."
::= { vRtrMplsP2mpInstStatEntry 2 }
vRtrMplsP2mpInstStatConfiguredS2ls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatConfiguredS2ls indicates the number
of S2ls configured for this P2MP LSP."
::= { vRtrMplsP2mpInstStatEntry 3 }
vRtrMplsP2mpInstStatOperationalS2ls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatOperationalS2ls indicates the number
of operational S2ls for this P2MP LSP. This includes the S2ls
currently active."
::= { vRtrMplsP2mpInstStatEntry 4 }
vRtrMplsP2mpInstStatLastS2lTimeUp OBJECT-TYPE
SYNTAX TmnxTimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatLastS2lTimeUp indicates the total
time that this S2l has been operational."
::= { vRtrMplsP2mpInstStatEntry 5 }
vRtrMplsP2mpInstStatLastS2lTimeDown OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatLastS2lTimeDown indicates the total
time that this S2l has not been operational."
::= { vRtrMplsP2mpInstStatEntry 6 }
vRtrMplsP2mpInstStatTimeUp OBJECT-TYPE
SYNTAX TmnxTimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatTimeUp indicates the total time that
this P2MP instance has been operational."
::= { vRtrMplsP2mpInstStatEntry 7 }
vRtrMplsP2mpInstStatTimeDown OBJECT-TYPE
SYNTAX TmnxTimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatTimeDown indicates the total time
that this P2MP instance has not been operational."
::= { vRtrMplsP2mpInstStatEntry 8 }
vRtrMplsP2mpInstStatTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The The value of vRtrMplsP2mpInstStatTransitions indicates the number
of state transitions (up -> down and down -> up) this P2mp instance
has undergone."
::= { vRtrMplsP2mpInstStatEntry 9 }
vRtrMplsP2mpInstStatLastTrans OBJECT-TYPE
SYNTAX TmnxTimeInterval
UNITS "ten-milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsP2mpInstStatLastTrans indicates the time since
the last transition occurred on this P2mp instance."
::= { vRtrMplsP2mpInstStatEntry 10 }
vRtrMplsS2lSubLspTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTblLastChanged indicates the sysUpTime
at the time of the last modification to vRtrMplsS2lSubLspTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 27 }
vRtrMplsS2lSubLspTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsS2lSubLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsS2lSubLspTable provides an association between an P2MP LSP
and a source to leaf (S2L) sub LSP path called as S2L here. A P2MP LSP
can have more than one S2L sub LSP association."
::= { tmnxMplsObjs 28 }
vRtrMplsS2lSubLspEntry OBJECT-TYPE
SYNTAX VRtrMplsS2lSubLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an association between a Labeled Switch
Path (P2MP LSP) in the vRtrMplsP2mpInstTable and a S2L sub LSP entry in
the vRtrMplsS2lSubLspTable. Entries in this table can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsS2lSubLspType to have been assigned a valid value."
INDEX {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
vRtrMplsS2lSubLspDstAddrType,
vRtrMplsS2lSubLspDstAddr
}
::= { vRtrMplsS2lSubLspTable 1 }
VRtrMplsS2lSubLspEntry ::= SEQUENCE
{
vRtrMplsS2lSubLspDstAddrType InetAddressType,
vRtrMplsS2lSubLspDstAddr InetAddress,
vRtrMplsS2lSubLspRowStatus RowStatus,
vRtrMplsS2lSubLspLastChange TimeStamp,
vRtrMplsS2lSubLspType INTEGER,
vRtrMplsS2lSubLspProperties BITS,
vRtrMplsS2lSubLspState INTEGER,
vRtrMplsS2lSubLspAdminState TmnxAdminState,
vRtrMplsS2lSubLspOperState TmnxOperState,
vRtrMplsS2lSubGroupId Unsigned32,
vRtrMplsS2lSubLspId MplsLSPID,
vRtrMplsS2lSubLspRetryTimeRemain Unsigned32,
vRtrMplsS2lSubLspTunARHopLtIndex Integer32,
vRtrMplsS2lSubLspNegotiatedMTU Unsigned32,
vRtrMplsS2lSubLspFailCode TmnxMplsLspFailCode,
vRtrMplsS2lSubLspFailNodeArType InetAddressType,
vRtrMplsS2lSubLspFailNodeAddr InetAddress,
vRtrMplsS2lSubLspOperBandwidth Integer32,
vRtrMplsS2lSubLspTunCRHopLtIndex Integer32,
vRtrMplsS2lSubLspOperMTU Unsigned32,
vRtrMplsS2lSubLspLastResigAttpt TimeStamp,
vRtrMplsS2lSubLspLastMBBType TmnxMplsMBBType,
vRtrMplsS2lSubLspLastMBBEnd TimeStamp,
vRtrMplsS2lSubLspLastMBBMetric Unsigned32,
vRtrMplsS2lSubLspLastMBBState INTEGER,
vRtrMplsS2lSubLspMBBTypeInProg TmnxMplsMBBType,
vRtrMplsS2lSubLspMBBStarted TimeStamp,
vRtrMplsS2lSubLspMBBNextRetry Unsigned32,
vRtrMplsS2lSubLspMBBRetryAttpts Unsigned32,
vRtrMplsS2lSubLspMBBFailCode TmnxMplsLspFailCode,
vRtrMplsS2lSubLspMBBFailNodeType InetAddressType,
vRtrMplsS2lSubLspMBBFailNodeAddr InetAddress,
vRtrMplsS2lSubLspUpTime TimeStamp,
vRtrMplsS2lSubLspDownTime TimeStamp,
vRtrMplsS2lSubLspIsFastRetry TruthValue,
vRtrMplsS2lSubLspTimeoutIn Unsigned32,
vRtrMplsS2lSubLspMBBTimeoutIn Unsigned32,
vRtrMplsS2lSubLspInterArea TruthValue
}
vRtrMplsS2lSubLspDstAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspDstAddrType indicates the type of
vRtrMplsS2lSubLspDstAddr."
::= { vRtrMplsS2lSubLspEntry 1 }
vRtrMplsS2lSubLspDstAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the
destination address of the S2L sub LSP. "
::= { vRtrMplsS2lSubLspEntry 2 }
vRtrMplsS2lSubLspRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspRowStatus specifies row status used for
creation, deletion, or control of vRtrMplsLspPathTable entries. Before
the row can be placed into the 'active' state vRtrMplsS2lSubLspType must
have been assigned a valid value."
::= { vRtrMplsS2lSubLspEntry 3 }
vRtrMplsS2lSubLspLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspLastChange indicates the sysUpTime when
this row was last modified."
::= { vRtrMplsS2lSubLspEntry 4 }
vRtrMplsS2lSubLspType OBJECT-TYPE
SYNTAX INTEGER {
s2lPath (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspType indicates the value that represents
the role this S2L sub LSP is taking within this P2MP LSP."
::= { vRtrMplsS2lSubLspEntry 5 }
vRtrMplsS2lSubLspProperties OBJECT-TYPE
SYNTAX BITS {
recordRoute (0),
adaptive (1),
cspf (2),
mergeable (3),
fastReroute (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspProperties indicates the set of
configured properties. For example, if the S2L sub LSP is an adaptive
S2L sub LSP, the bit corresponding to bit value 1 is set."
::= { vRtrMplsS2lSubLspEntry 6 }
vRtrMplsS2lSubLspState OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
active (2),
inactive (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspState indicates the current working
state of this S2L sub LSP within this LSP."
DEFVAL { unknown }
::= { vRtrMplsS2lSubLspEntry 7 }
vRtrMplsS2lSubLspAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspAdminState specifies the desired
administrative state for this P2MP S2L sub LSP."
DEFVAL { inService }
::= { vRtrMplsS2lSubLspEntry 8 }
vRtrMplsS2lSubLspOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspOperState indicates the current
operational state of this P2MP S2L sub LSP."
::= { vRtrMplsS2lSubLspEntry 9 }
vRtrMplsS2lSubGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubGroupId indicates the value which
identifies the group for this entry."
::= { vRtrMplsS2lSubLspEntry 10 }
vRtrMplsS2lSubLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspId indicates the value which identifies
the label switched path that is signaled for this entry."
::= { vRtrMplsS2lSubLspEntry 11 }
vRtrMplsS2lSubLspRetryTimeRemain OBJECT-TYPE
SYNTAX Unsigned32
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspRetryTimeRemain indicates the time to
signal this S2L sub LSP."
::= { vRtrMplsS2lSubLspEntry 12 }
vRtrMplsS2lSubLspTunARHopLtIndex OBJECT-TYPE
SYNTAX Integer32 (0 | 1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTunARHopLtIndex indicates Primary index
into the mplsTunnelARHopTable identifying a particular recorded hop
list. A value of 0 implies that there is no recorded hop list
associated with this P2MP LSP path."
::= { vRtrMplsS2lSubLspEntry 13 }
vRtrMplsS2lSubLspNegotiatedMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP Path."
DEFVAL { 0 }
::= { vRtrMplsS2lSubLspEntry 14 }
vRtrMplsS2lSubLspFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred."
::= { vRtrMplsS2lSubLspEntry 15 }
vRtrMplsS2lSubLspFailNodeArType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspFailNodeArType indicates type of
vRtrMplsS2lSubLspFailNodeAddr. When no failure has occurred, this
value is 0."
::= { vRtrMplsS2lSubLspEntry 16 }
vRtrMplsS2lSubLspFailNodeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspFailNodeAddr indicates the IP address of
the node in the P2MP S2L sub LSP at which the P2MP S2L sub LSP failed."
::= { vRtrMplsS2lSubLspEntry 17 }
vRtrMplsS2lSubLspOperBandwidth OBJECT-TYPE
SYNTAX Integer32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP S2L sub LSP.
When make-before-break functionality for the P2MP LSP is enabled and
if the S2L sub LSP bandwidth is changed, the resources allocated to
the existing P2MP LSP paths will not be released until a new S2L sub
LSP with the new bandwidth settings has been established. While a new
S2L sub LSP is being signaled, the administrative value and the
operational values of the S2L sub LSP bandwidth may differ. The value
of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth requirements
for the new P2MP S2L sub LSP trying to be established whereas the
value of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth
reserved for the existing P2MP S2L sub LSP."
::= { vRtrMplsS2lSubLspEntry 18 }
vRtrMplsS2lSubLspTunCRHopLtIndex OBJECT-TYPE
SYNTAX Integer32 (0 | 1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTunCRHopLtIndex indicates primary index
into the vRtrMplsTunnelCHopTable identifying a particular computed hop
list. A value of 0 implies that there is no computed hop list
associated with this LSP path."
::= { vRtrMplsS2lSubLspEntry 19 }
vRtrMplsS2lSubLspOperMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspOperMTU indicates the size for the
Maximum transmission unit (MTU) that is currently operation for this
P2MP LSP Path."
::= { vRtrMplsS2lSubLspEntry 20 }
vRtrMplsS2lSubLspLastResigAttpt OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this LSP was made."
::= { vRtrMplsS2lSubLspEntry 21 }
vRtrMplsS2lSubLspLastMBBType OBJECT-TYPE
SYNTAX TmnxMplsMBBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted."
::= { vRtrMplsS2lSubLspEntry 22 }
vRtrMplsS2lSubLspLastMBBEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspLastMBBEnd indicates the sysUpTime when
the last MBB ended."
::= { vRtrMplsS2lSubLspEntry 23 }
vRtrMplsS2lSubLspLastMBBMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspLastMBBMetric indicates the
cost of the traffic engineered S2L sub LSP for the S2L sub LSP
prior to MBB."
::= { vRtrMplsS2lSubLspEntry 24 }
vRtrMplsS2lSubLspLastMBBState OBJECT-TYPE
SYNTAX INTEGER {
none (1),
success (2),
fail (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break successful
fail (3) - make-before-break failed."
::= { vRtrMplsS2lSubLspEntry 25 }
vRtrMplsS2lSubLspMBBTypeInProg OBJECT-TYPE
SYNTAX TmnxMplsMBBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress."
::= { vRtrMplsS2lSubLspEntry 26 }
vRtrMplsS2lSubLspMBBStarted OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBStarted indicates the sysUpTime when
the in-progress MBB started."
::= { vRtrMplsS2lSubLspEntry 27 }
vRtrMplsS2lSubLspMBBNextRetry OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBNextRetry indicates the amount of
time remaining in seconds before the next attempt is made to retry the
in-progress MBB."
::= { vRtrMplsS2lSubLspEntry 28 }
vRtrMplsS2lSubLspMBBRetryAttpts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress."
::= { vRtrMplsS2lSubLspEntry 29 }
vRtrMplsS2lSubLspMBBFailCode OBJECT-TYPE
SYNTAX TmnxMplsLspFailCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBFailCode indicates the reason code
for in-progress MBB failure. A value of 'none' indicates that no
failure has occurred."
::= { vRtrMplsS2lSubLspEntry 30 }
vRtrMplsS2lSubLspMBBFailNodeType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBFailNodeType indicates the type of
vRtrMplsS2lSubLspMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred."
::= { vRtrMplsS2lSubLspEntry 31 }
vRtrMplsS2lSubLspMBBFailNodeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBFailNodeAddr indicates the IP address
of the node in the S2L sub LSP at which the in-progress MBB failed. A
value of 'unknown' for vRtrMplsS2lSubLspMBBFailNodeType and empty
string for vRtrMplsS2lSubLspMBBFailNodeAddr indicates that no failure
has occurred."
::= { vRtrMplsS2lSubLspEntry 32 }
vRtrMplsS2lSubLspUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspUpTime indicates the timestamp when the
S2l came up."
::= { vRtrMplsS2lSubLspEntry 33 }
vRtrMplsS2lSubLspDownTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspDownTime indicates the timestamp when
the S2l went down."
::= { vRtrMplsS2lSubLspEntry 34 }
vRtrMplsS2lSubLspIsFastRetry OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspIsFastRetry indicates which retry timer
is being referred to by vRtrMplsS2lSubLspRetryTimeRemain.
When the value of vRtrMplsLspPathIsFastRetry is set to 'true',
vRtrMplsLspPathRetryTimeRemaining is referring to the P2MP S2L path
fast timer, vRtrMplsGenP2mpS2lFastRetry.
When the value of vRtrMplsLspPathIsFastRetry is set to 'false',
vRtrMplsS2lSubLspRetryTimeRemain is referring to the LSP retry timer,
vRtrMplsLspRetryTimer."
::= { vRtrMplsS2lSubLspEntry 35 }
vRtrMplsS2lSubLspTimeoutIn OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTimeoutIn indicates the amount of time
remaining, in seconds, for the S2L path state to time out after the
initial PATH message has been sent. If the timer expires and the S2L
path has not become operationally up, the S2L path is torn down and
the retry timer is started to schedule a new retry cycle."
::= { vRtrMplsS2lSubLspEntry 36 }
vRtrMplsS2lSubLspMBBTimeoutIn OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspMBBTimeoutIn indicates the amount of
time remaining, in seconds, for the in-progress S2L MBB path state to
time out after the initial PATH message has been sent. If the timer
expires and the in-progress S2L MBB path has not become operationally
up, the S2L MBB path is torn down and the retry timer is started to
schedule a new retry cycle."
::= { vRtrMplsS2lSubLspEntry 37 }
vRtrMplsS2lSubLspInterArea OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspInterArea indicates whether the LSP path
is either inter-area or intra-area."
::= { vRtrMplsS2lSubLspEntry 38 }
vRtrMplsS2lSubLspStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsS2lSubLspStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsS2lSubLspStatTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system."
::= { tmnxMplsObjs 29 }
vRtrMplsS2lSubLspStatEntry OBJECT-TYPE
SYNTAX VRtrMplsS2lSubLspStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for a P2MP Source
to Leaf (S2L) Sub Labeled Switch Path (LSP) configured for a i virtual
router in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsS2lSubLspEntry }
::= { vRtrMplsS2lSubLspStatTable 1 }
VRtrMplsS2lSubLspStatEntry ::= SEQUENCE
{
vRtrMplsS2lSubLspTimeUp TimeInterval,
vRtrMplsS2lSubLspTimeDown TimeInterval,
vRtrMplsS2lSubLspRetryAttempts Counter32,
vRtrMplsS2lSubLspTransitionCount Counter32,
vRtrMplsS2lSubLspCspfQueries Counter32
}
vRtrMplsS2lSubLspTimeUp OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTimeUp indicates the total time that
this LSP S2l has been operational. For example, the percentage up
time can be determined by computing
(vRtrMplsS2lSubLspTimeUp/vRtrMplsLspAge * 100 %)."
::= { vRtrMplsS2lSubLspStatEntry 1 }
vRtrMplsS2lSubLspTimeDown OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTimeDown indicates the total time that
this LSP S2l has not been operational."
::= { vRtrMplsS2lSubLspStatEntry 2 }
vRtrMplsS2lSubLspRetryAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspRetryAttempts indicates the number of
unsuccessful attempts which have been made to signal this S2l. As soon
as the S2l gets signalled, this is set to 0."
::= { vRtrMplsS2lSubLspStatEntry 3 }
vRtrMplsS2lSubLspTransitionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspTransitionCount indicates the number of
transitions that have occurred for this LSP."
::= { vRtrMplsS2lSubLspStatEntry 4 }
vRtrMplsS2lSubLspCspfQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsS2lSubLspCspfQueries indicates the number of CSPF
queries that have been made for this LSP S2l."
::= { vRtrMplsS2lSubLspStatEntry 5 }
vRtrMplsSrlgDBRtrIdTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBRtrIdTblLastChg indicates the sysUpTime at
the time of the last modification to vRtrMplsSrlgDBRtrIdTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 30 }
vRtrMplsSrlgDBRtrIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsSrlgDBRtrIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsSrlgDBRtrIdTable has an entry for each router-id
configured under user Shared Risk Link Group (SRLG) database. The user
manually enters the SRLG membership information for any link
in the network, into the user SRLG database."
::= { tmnxMplsObjs 31 }
vRtrMplsSrlgDBRtrIdEntry OBJECT-TYPE
SYNTAX VRtrMplsSrlgDBRtrIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a router ID under which interface entries
would be configured for the SRLG database table.
A row can be created or deleted via SNMP SET requests."
INDEX {
vRtrID,
vRtrMplsSrlgDBRtrIdRouterID
}
::= { vRtrMplsSrlgDBRtrIdTable 1 }
VRtrMplsSrlgDBRtrIdEntry ::= SEQUENCE
{
vRtrMplsSrlgDBRtrIdRouterID TmnxMplsRouterId,
vRtrMplsSrlgDBRtrIdRowStatus RowStatus,
vRtrMplsSrlgDBRtrIdAdminState TmnxAdminState,
vRtrMplsSrlgDBRtrIdLastChanged TimeStamp
}
vRtrMplsSrlgDBRtrIdRouterID OBJECT-TYPE
SYNTAX TmnxMplsRouterId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBRtrIdRouterID specifies a 32-bit integer uniquely
identifying the router in the Autonomous System. By convention
to ensure uniqueness, this may default to the value of one of the
router's IPv4 host addresses, represented as a 32-bit unsigned
integer, if IPv4 is configured on the router. The router-id can be
either the local one or some remote router."
::= { vRtrMplsSrlgDBRtrIdEntry 1 }
vRtrMplsSrlgDBRtrIdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrMplsSrlgDBRtrIdRowStatus is used to create, delete or control
entries in the vRtrMplsSrlgDBRtrIdTable."
::= { vRtrMplsSrlgDBRtrIdEntry 2 }
vRtrMplsSrlgDBRtrIdAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBRtrIdAdminState specifies the desired
administrative state for the router-id entry in the
vRtrMplsSrlgDBRtrIdTable."
DEFVAL { outOfService }
::= { vRtrMplsSrlgDBRtrIdEntry 3 }
vRtrMplsSrlgDBRtrIdLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBRtrIdLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgDBRtrIdTable."
::= { vRtrMplsSrlgDBRtrIdEntry 4 }
vRtrMplsSrlgDBIfTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBIfTblLastChanged indicates the sysUpTime at
the time of the last modification to vRtrMplsSrlgDBIfTable by adding,
deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 32 }
vRtrMplsSrlgDBIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsSrlgDBIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsSrlgDBIfTable has an entry for each Shared Risk Link Group
(SRLG) groups associated with a interface which is validated as part
of a router ID in the routing table. The user manually enters the SRLG
membership information for any link in the network, into the user SRLG
database."
::= { tmnxMplsObjs 33 }
vRtrMplsSrlgDBIfEntry OBJECT-TYPE
SYNTAX VRtrMplsSrlgDBIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an SRLG group associated with a interface
which is validated as part of a router ID in the routing table.
A row can be created or deleted via SNMP SET requests."
INDEX {
vRtrID,
vRtrMplsSrlgDBRtrIdRouterID,
vRtrMplsSrlgDBIfIntIpAddrType,
vRtrMplsSrlgDBIfIntIpAddr,
IMPLIED vRtrMplsSrlgDBIfSrlgGroupName
}
::= { vRtrMplsSrlgDBIfTable 1 }
VRtrMplsSrlgDBIfEntry ::= SEQUENCE
{
vRtrMplsSrlgDBIfIntIpAddrType InetAddressType,
vRtrMplsSrlgDBIfIntIpAddr InetAddress,
vRtrMplsSrlgDBIfSrlgGroupName TNamedItem,
vRtrMplsSrlgDBIfRowStatus RowStatus,
vRtrMplsSrlgDBIfLastChanged TimeStamp
}
vRtrMplsSrlgDBIfIntIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBIfIntIpAddrType indicates the type of
vRtrMplsSrlgDBIfIntIpAddr."
::= { vRtrMplsSrlgDBIfEntry 1 }
vRtrMplsSrlgDBIfIntIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBIfIntIpAddr indicates the IP address of the
interface."
::= { vRtrMplsSrlgDBIfEntry 2 }
vRtrMplsSrlgDBIfSrlgGroupName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBIfSrlgGroupName indicates the SRLG group
name."
::= { vRtrMplsSrlgDBIfEntry 3 }
vRtrMplsSrlgDBIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrMplsSrlgDBIfRowStatus is used to create, delete or control entries
in the vRtrMplsSrlgDBIfTable."
::= { vRtrMplsSrlgDBIfEntry 4 }
vRtrMplsSrlgDBIfLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsSrlgDBIfLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgDBIfTable."
::= { vRtrMplsSrlgDBIfEntry 5 }
vRtrMplsInSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsInSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsInSegmentTable augments the mplsInSegmentTable in the
MPLS-LSR-MIB."
::= { tmnxMplsObjs 34 }
vRtrMplsInSegmentEntry OBJECT-TYPE
SYNTAX VRtrMplsInSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry in this table corresponds to a row entry in the
mplsInSegmentTable and adds to the information contained in that
table."
AUGMENTS { mplsInSegmentEntry }
::= { vRtrMplsInSegmentTable 1 }
VRtrMplsInSegmentEntry ::= SEQUENCE
{ vRtrMplsInSegmentNumS2ls Unsigned32 }
vRtrMplsInSegmentNumS2ls OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInSegmentNumS2ls indicates number of S2Ls on the
insegment."
::= { vRtrMplsInSegmentEntry 1 }
vRtrMplsOutSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsOutSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsOutSegmentTable augments the mplsOutSegmentTable in the
MPLS-LSR-MIB."
::= { tmnxMplsObjs 35 }
vRtrMplsOutSegmentEntry OBJECT-TYPE
SYNTAX VRtrMplsOutSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry in this table corresponds to a row entry in the
mplsOutSegmentTable and adds to the information contained in that
table."
AUGMENTS { mplsOutSegmentEntry }
::= { vRtrMplsOutSegmentTable 1 }
VRtrMplsOutSegmentEntry ::= SEQUENCE
{ vRtrMplsOutSegmentNumS2ls Unsigned32 }
vRtrMplsOutSegmentNumS2ls OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutSegmentNumS2ls indicates number of S2Ls on the
outsegment."
::= { vRtrMplsOutSegmentEntry 1 }
vRtrMplsLspStatsTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last change to the vRtrMplsLspStatsTable either from
adding a row or removing a row."
::= { tmnxMplsObjs 37 }
vRtrMplsLspStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrMplsLspStatsTable controls Statistics in the ess data path at the
ingress Label Switched Path (LSP) for an Mpls-Lsp FEC."
::= { tmnxMplsObjs 38 }
vRtrMplsLspStatsEntry OBJECT-TYPE
SYNTAX VRtrMplsLspStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information about the Statistics
collection per MPLS LSP."
INDEX {
vRtrID,
vRtrMplsLspStatsType,
vRtrMplsLspStatsSenderAddrType,
vRtrMplsLspStatsSenderAddr,
vRtrMplsLspStatsLspName
}
::= { vRtrMplsLspStatsTable 1 }
VRtrMplsLspStatsEntry ::= SEQUENCE
{
vRtrMplsLspStatsType INTEGER,
vRtrMplsLspStatsSenderAddrType InetAddressType,
vRtrMplsLspStatsSenderAddr InetAddress,
vRtrMplsLspStatsLspName TLNamedItem,
vRtrMplsLspStatsRowStatus RowStatus,
vRtrMplsLspStatsLastChanged TimeStamp,
vRtrMplsLspStatsCollectStats TruthValue,
vRtrMplsLspStatsAccntingPolicy Unsigned32,
vRtrMplsLspStatsAdminState TmnxAdminState,
vRtrMplsLspStatsMode INTEGER
}
vRtrMplsLspStatsType OBJECT-TYPE
SYNTAX INTEGER {
egress (0),
ingress (1),
srTeEgress (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsType indicates the type of statistics."
::= { vRtrMplsLspStatsEntry 1 }
vRtrMplsLspStatsSenderAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsSenderAddrType indicates address type of
vRtrMplsLspStatsSenderAddr."
::= { vRtrMplsLspStatsEntry 2 }
vRtrMplsLspStatsSenderAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsSenderAddr indicates the sender address."
::= { vRtrMplsLspStatsEntry 3 }
vRtrMplsLspStatsLspName OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsLspName indicates the lsp name.
If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p',
vRtrMplsLspStatsLspName can have a maximum of 32 characters."
::= { vRtrMplsLspStatsEntry 4 }
vRtrMplsLspStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrMplsLspStatsRowStatus is used for the creation or deletion of
entries in the vRtrMplsLspStatsTable."
::= { vRtrMplsLspStatsEntry 5 }
vRtrMplsLspStatsLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsLastChanged indicates the time stamp of
the last change to this row of this table."
::= { vRtrMplsLspStatsEntry 6 }
vRtrMplsLspStatsCollectStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsCollectStats specifies whether to collect
statistics for this prefix."
DEFVAL { false }
::= { vRtrMplsLspStatsEntry 7 }
vRtrMplsLspStatsAccntingPolicy OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsAccntingPolicy specifies the accounting
policy to be used for this entry.
A value of zero indicates that the default accounting policy should be
used."
DEFVAL { 0 }
::= { vRtrMplsLspStatsEntry 8 }
vRtrMplsLspStatsAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsAdminState specifies whether egress
statistics are enabled for this lsp."
DEFVAL { outOfService }
::= { vRtrMplsLspStatsEntry 9 }
vRtrMplsLspStatsMode OBJECT-TYPE
SYNTAX INTEGER {
per-fc (0),
aggregate (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsMode specifies whether statistics are
per-fc or aggregate.
If the value of vRtrMplsLspStatsMode is 'per-fc' means collected stats
will be per forwarding class.
If the value of vRtrMplsLspStatsMode is 'aggregate' means collected
stats will be aggregated."
DEFVAL { per-fc }
::= { vRtrMplsLspStatsEntry 10 }
vRtrMplsLspStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspStatisticsTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system."
::= { tmnxMplsObjs 39 }
vRtrMplsLspStatisticsEntry OBJECT-TYPE
SYNTAX VRtrMplsLspStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for a Labeled
Switch Path (LSP) configured for a virtual router in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsLspStatsEntry }
::= { vRtrMplsLspStatisticsTable 1 }
VRtrMplsLspStatisticsEntry ::= SEQUENCE
{
vRtrMplsInProfilePktsFc0 Counter64,
vRtrMplsInProfilePktsFc0Low32 Counter32,
vRtrMplsInProfilePktsFc0High32 Counter32,
vRtrMplsInProfilePktsFc1 Counter64,
vRtrMplsInProfilePktsFc1Low32 Counter32,
vRtrMplsInProfilePktsFc1High32 Counter32,
vRtrMplsInProfilePktsFc2 Counter64,
vRtrMplsInProfilePktsFc2Low32 Counter32,
vRtrMplsInProfilePktsFc2High32 Counter32,
vRtrMplsInProfilePktsFc3 Counter64,
vRtrMplsInProfilePktsFc3Low32 Counter32,
vRtrMplsInProfilePktsFc3High32 Counter32,
vRtrMplsInProfilePktsFc4 Counter64,
vRtrMplsInProfilePktsFc4Low32 Counter32,
vRtrMplsInProfilePktsFc4High32 Counter32,
vRtrMplsInProfilePktsFc5 Counter64,
vRtrMplsInProfilePktsFc5Low32 Counter32,
vRtrMplsInProfilePktsFc5High32 Counter32,
vRtrMplsInProfilePktsFc6 Counter64,
vRtrMplsInProfilePktsFc6Low32 Counter32,
vRtrMplsInProfilePktsFc6High32 Counter32,
vRtrMplsInProfilePktsFc7 Counter64,
vRtrMplsInProfilePktsFc7Low32 Counter32,
vRtrMplsInProfilePktsFc7High32 Counter32,
vRtrMplsInProfileOctetsFc0 Counter64,
vRtrMplsInProfileOctetsFc0Low32 Counter32,
vRtrMplsInProfileOctetsFc0High32 Counter32,
vRtrMplsInProfileOctetsFc1 Counter64,
vRtrMplsInProfileOctetsFc1Low32 Counter32,
vRtrMplsInProfileOctetsFc1High32 Counter32,
vRtrMplsInProfileOctetsFc2 Counter64,
vRtrMplsInProfileOctetsFc2Low32 Counter32,
vRtrMplsInProfileOctetsFc2High32 Counter32,
vRtrMplsInProfileOctetsFc3 Counter64,
vRtrMplsInProfileOctetsFc3Low32 Counter32,
vRtrMplsInProfileOctetsFc3High32 Counter32,
vRtrMplsInProfileOctetsFc4 Counter64,
vRtrMplsInProfileOctetsFc4Low32 Counter32,
vRtrMplsInProfileOctetsFc4High32 Counter32,
vRtrMplsInProfileOctetsFc5 Counter64,
vRtrMplsInProfileOctetsFc5Low32 Counter32,
vRtrMplsInProfileOctetsFc5High32 Counter32,
vRtrMplsInProfileOctetsFc6 Counter64,
vRtrMplsInProfileOctetsFc6Low32 Counter32,
vRtrMplsInProfileOctetsFc6High32 Counter32,
vRtrMplsInProfileOctetsFc7 Counter64,
vRtrMplsInProfileOctetsFc7Low32 Counter32,
vRtrMplsInProfileOctetsFc7High32 Counter32,
vRtrMplsOutOfProfPktsFc0 Counter64,
vRtrMplsOutOfProfPktsFc0Low32 Counter32,
vRtrMplsOutOfProfPktsFc0High32 Counter32,
vRtrMplsOutOfProfPktsFc1 Counter64,
vRtrMplsOutOfProfPktsFc1Low32 Counter32,
vRtrMplsOutOfProfPktsFc1High32 Counter32,
vRtrMplsOutOfProfPktsFc2 Counter64,
vRtrMplsOutOfProfPktsFc2Low32 Counter32,
vRtrMplsOutOfProfPktsFc2High32 Counter32,
vRtrMplsOutOfProfPktsFc3 Counter64,
vRtrMplsOutOfProfPktsFc3Low32 Counter32,
vRtrMplsOutOfProfPktsFc3High32 Counter32,
vRtrMplsOutOfProfPktsFc4 Counter64,
vRtrMplsOutOfProfPktsFc4Low32 Counter32,
vRtrMplsOutOfProfPktsFc4High32 Counter32,
vRtrMplsOutOfProfPktsFc5 Counter64,
vRtrMplsOutOfProfPktsFc5Low32 Counter32,
vRtrMplsOutOfProfPktsFc5High32 Counter32,
vRtrMplsOutOfProfPktsFc6 Counter64,
vRtrMplsOutOfProfPktsFc6Low32 Counter32,
vRtrMplsOutOfProfPktsFc6High32 Counter32,
vRtrMplsOutOfProfPktsFc7 Counter64,
vRtrMplsOutOfProfPktsFc7Low32 Counter32,
vRtrMplsOutOfProfPktsFc7High32 Counter32,
vRtrMplsOutOfProfOctetsFc0 Counter64,
vRtrMplsOutOfProfOctetsFc0Low32 Counter32,
vRtrMplsOutOfProfOctetsFc0High32 Counter32,
vRtrMplsOutOfProfOctetsFc1 Counter64,
vRtrMplsOutOfProfOctetsFc1Low32 Counter32,
vRtrMplsOutOfProfOctetsFc1High32 Counter32,
vRtrMplsOutOfProfOctetsFc2 Counter64,
vRtrMplsOutOfProfOctetsFc2Low32 Counter32,
vRtrMplsOutOfProfOctetsFc2High32 Counter32,
vRtrMplsOutOfProfOctetsFc3 Counter64,
vRtrMplsOutOfProfOctetsFc3Low32 Counter32,
vRtrMplsOutOfProfOctetsFc3High32 Counter32,
vRtrMplsOutOfProfOctetsFc4 Counter64,
vRtrMplsOutOfProfOctetsFc4Low32 Counter32,
vRtrMplsOutOfProfOctetsFc4High32 Counter32,
vRtrMplsOutOfProfOctetsFc5 Counter64,
vRtrMplsOutOfProfOctetsFc5Low32 Counter32,
vRtrMplsOutOfProfOctetsFc5High32 Counter32,
vRtrMplsOutOfProfOctetsFc6 Counter64,
vRtrMplsOutOfProfOctetsFc6Low32 Counter32,
vRtrMplsOutOfProfOctetsFc6High32 Counter32,
vRtrMplsOutOfProfOctetsFc7 Counter64,
vRtrMplsOutOfProfOctetsFc7Low32 Counter32,
vRtrMplsOutOfProfOctetsFc7High32 Counter32,
vRtrMplsLspStatsPSBMatch TruthValue,
vRtrMplsLspStatsTpOnly TruthValue,
vRtrMplsLspStatsLspType INTEGER,
vRtrMplsLspAggregatePkts Counter64,
vRtrMplsLspAggregateOctets Counter64,
vRtrMplsLspStatsAggregateOnly TruthValue,
vRtrMplsLspStatsRateEnabled TruthValue,
vRtrMplsLspStatsRatePkts Unsigned32,
vRtrMplsLspStatsRateMbps Unsigned32
}
vRtrMplsInProfilePktsFc0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc0 indicates the number of in
profile packets received for Forwarding Class 0."
::= { vRtrMplsLspStatisticsEntry 1 }
vRtrMplsInProfilePktsFc0Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc0Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc0."
::= { vRtrMplsLspStatisticsEntry 2 }
vRtrMplsInProfilePktsFc0High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc0High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc0."
::= { vRtrMplsLspStatisticsEntry 3 }
vRtrMplsInProfilePktsFc1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc1 indicates the number of in
profile packets received for Forwarding Class 1."
::= { vRtrMplsLspStatisticsEntry 4 }
vRtrMplsInProfilePktsFc1Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc1Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc1."
::= { vRtrMplsLspStatisticsEntry 5 }
vRtrMplsInProfilePktsFc1High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc1High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc1."
::= { vRtrMplsLspStatisticsEntry 6 }
vRtrMplsInProfilePktsFc2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc2 indicates the number of in
profile packets received for Forwarding Class 2."
::= { vRtrMplsLspStatisticsEntry 7 }
vRtrMplsInProfilePktsFc2Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc2Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc2."
::= { vRtrMplsLspStatisticsEntry 8 }
vRtrMplsInProfilePktsFc2High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc2High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc2."
::= { vRtrMplsLspStatisticsEntry 9 }
vRtrMplsInProfilePktsFc3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc3 indicates the number of in
profile packets received for Forwarding Class 3."
::= { vRtrMplsLspStatisticsEntry 10 }
vRtrMplsInProfilePktsFc3Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc3Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc3."
::= { vRtrMplsLspStatisticsEntry 11 }
vRtrMplsInProfilePktsFc3High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc3High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc3."
::= { vRtrMplsLspStatisticsEntry 12 }
vRtrMplsInProfilePktsFc4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc4 indicates the number of in
profile packets received for Forwarding Class 4."
::= { vRtrMplsLspStatisticsEntry 13 }
vRtrMplsInProfilePktsFc4Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc4Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc4."
::= { vRtrMplsLspStatisticsEntry 14 }
vRtrMplsInProfilePktsFc4High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc4High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc4."
::= { vRtrMplsLspStatisticsEntry 15 }
vRtrMplsInProfilePktsFc5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc5 indicates the number of in
profile packets received for Forwarding Class 5."
::= { vRtrMplsLspStatisticsEntry 16 }
vRtrMplsInProfilePktsFc5Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc5Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc5."
::= { vRtrMplsLspStatisticsEntry 17 }
vRtrMplsInProfilePktsFc5High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc5High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc5."
::= { vRtrMplsLspStatisticsEntry 18 }
vRtrMplsInProfilePktsFc6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc6 indicates the number of in
profile packets received for Forwarding Class 6."
::= { vRtrMplsLspStatisticsEntry 19 }
vRtrMplsInProfilePktsFc6Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc6Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc6."
::= { vRtrMplsLspStatisticsEntry 20 }
vRtrMplsInProfilePktsFc6High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc6High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc6."
::= { vRtrMplsLspStatisticsEntry 21 }
vRtrMplsInProfilePktsFc7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc7 indicates the number of in
profile packets received for Forwarding Class 7."
::= { vRtrMplsLspStatisticsEntry 22 }
vRtrMplsInProfilePktsFc7Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc7Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc7."
::= { vRtrMplsLspStatisticsEntry 23 }
vRtrMplsInProfilePktsFc7High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfilePktsFc7High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc7."
::= { vRtrMplsLspStatisticsEntry 24 }
vRtrMplsInProfileOctetsFc0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc0 indicates the number of in
profile octets received for Forwarding Class 0."
::= { vRtrMplsLspStatisticsEntry 25 }
vRtrMplsInProfileOctetsFc0Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc0Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc0."
::= { vRtrMplsLspStatisticsEntry 26 }
vRtrMplsInProfileOctetsFc0High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc0High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc0."
::= { vRtrMplsLspStatisticsEntry 27 }
vRtrMplsInProfileOctetsFc1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc1 indicates the number of in
profile octets received for Forwarding Class 1."
::= { vRtrMplsLspStatisticsEntry 28 }
vRtrMplsInProfileOctetsFc1Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc1Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc1."
::= { vRtrMplsLspStatisticsEntry 29 }
vRtrMplsInProfileOctetsFc1High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc1High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc1."
::= { vRtrMplsLspStatisticsEntry 30 }
vRtrMplsInProfileOctetsFc2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc2 indicates the number of in
profile octets received for Forwarding Class 2."
::= { vRtrMplsLspStatisticsEntry 31 }
vRtrMplsInProfileOctetsFc2Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc2Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc2."
::= { vRtrMplsLspStatisticsEntry 32 }
vRtrMplsInProfileOctetsFc2High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc2High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc2."
::= { vRtrMplsLspStatisticsEntry 33 }
vRtrMplsInProfileOctetsFc3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc3 indicates the number of in
profile octets received for Forwarding Class 3."
::= { vRtrMplsLspStatisticsEntry 34 }
vRtrMplsInProfileOctetsFc3Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc3Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc3."
::= { vRtrMplsLspStatisticsEntry 35 }
vRtrMplsInProfileOctetsFc3High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc3High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc3."
::= { vRtrMplsLspStatisticsEntry 36 }
vRtrMplsInProfileOctetsFc4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc4 indicates the number of in
profile octets received for Forwarding Class 4."
::= { vRtrMplsLspStatisticsEntry 37 }
vRtrMplsInProfileOctetsFc4Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc4Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc4."
::= { vRtrMplsLspStatisticsEntry 38 }
vRtrMplsInProfileOctetsFc4High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc4High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc4."
::= { vRtrMplsLspStatisticsEntry 39 }
vRtrMplsInProfileOctetsFc5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc5 indicates the number of in
profile octets received for Forwarding Class 5."
::= { vRtrMplsLspStatisticsEntry 40 }
vRtrMplsInProfileOctetsFc5Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc5Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc5."
::= { vRtrMplsLspStatisticsEntry 41 }
vRtrMplsInProfileOctetsFc5High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc5High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc5."
::= { vRtrMplsLspStatisticsEntry 42 }
vRtrMplsInProfileOctetsFc6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc6 indicates the number of in
profile octets received for Forwarding Class 6."
::= { vRtrMplsLspStatisticsEntry 43 }
vRtrMplsInProfileOctetsFc6Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc6Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc6."
::= { vRtrMplsLspStatisticsEntry 44 }
vRtrMplsInProfileOctetsFc6High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc6High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc6."
::= { vRtrMplsLspStatisticsEntry 45 }
vRtrMplsInProfileOctetsFc7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc7 indicates the number of in
profile octets received for Forwarding Class 7."
::= { vRtrMplsLspStatisticsEntry 46 }
vRtrMplsInProfileOctetsFc7Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc7Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc7."
::= { vRtrMplsLspStatisticsEntry 47 }
vRtrMplsInProfileOctetsFc7High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsInProfileOctetsFc7High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc7."
::= { vRtrMplsLspStatisticsEntry 48 }
vRtrMplsOutOfProfPktsFc0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc0 indicates the number of out of
profile packets received for Forwarding Class 0."
::= { vRtrMplsLspStatisticsEntry 49 }
vRtrMplsOutOfProfPktsFc0Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc0Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc0."
::= { vRtrMplsLspStatisticsEntry 50 }
vRtrMplsOutOfProfPktsFc0High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc0High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc0."
::= { vRtrMplsLspStatisticsEntry 51 }
vRtrMplsOutOfProfPktsFc1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc1 indicates the number of out of
profile packets received for Forwarding Class 1."
::= { vRtrMplsLspStatisticsEntry 52 }
vRtrMplsOutOfProfPktsFc1Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc1Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc1."
::= { vRtrMplsLspStatisticsEntry 53 }
vRtrMplsOutOfProfPktsFc1High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc1High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc1."
::= { vRtrMplsLspStatisticsEntry 54 }
vRtrMplsOutOfProfPktsFc2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc2 indicates the number of out of
profile packets received for Forwarding Class 2."
::= { vRtrMplsLspStatisticsEntry 55 }
vRtrMplsOutOfProfPktsFc2Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc2Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc2."
::= { vRtrMplsLspStatisticsEntry 56 }
vRtrMplsOutOfProfPktsFc2High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc2High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc2."
::= { vRtrMplsLspStatisticsEntry 57 }
vRtrMplsOutOfProfPktsFc3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc3 indicates the number of out of
profile packets received for Forwarding Class 3."
::= { vRtrMplsLspStatisticsEntry 58 }
vRtrMplsOutOfProfPktsFc3Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc3Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc3."
::= { vRtrMplsLspStatisticsEntry 59 }
vRtrMplsOutOfProfPktsFc3High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc3High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc3."
::= { vRtrMplsLspStatisticsEntry 60 }
vRtrMplsOutOfProfPktsFc4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc4 indicates the number of out of
profile packets received for Forwarding Class 4."
::= { vRtrMplsLspStatisticsEntry 61 }
vRtrMplsOutOfProfPktsFc4Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc4Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc4."
::= { vRtrMplsLspStatisticsEntry 62 }
vRtrMplsOutOfProfPktsFc4High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc4High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc4."
::= { vRtrMplsLspStatisticsEntry 63 }
vRtrMplsOutOfProfPktsFc5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc5 indicates the number of out of
profile packets received for Forwarding Class 5."
::= { vRtrMplsLspStatisticsEntry 64 }
vRtrMplsOutOfProfPktsFc5Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc5Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc5."
::= { vRtrMplsLspStatisticsEntry 65 }
vRtrMplsOutOfProfPktsFc5High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc5High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc5."
::= { vRtrMplsLspStatisticsEntry 66 }
vRtrMplsOutOfProfPktsFc6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc6 indicates the number of out of
profile packets received for Forwarding Class 6."
::= { vRtrMplsLspStatisticsEntry 67 }
vRtrMplsOutOfProfPktsFc6Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc6Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc6."
::= { vRtrMplsLspStatisticsEntry 68 }
vRtrMplsOutOfProfPktsFc6High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc6High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc6."
::= { vRtrMplsLspStatisticsEntry 69 }
vRtrMplsOutOfProfPktsFc7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc7 indicates the number of out of
profile packets received for Forwarding Class 7."
::= { vRtrMplsLspStatisticsEntry 70 }
vRtrMplsOutOfProfPktsFc7Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc7Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc7."
::= { vRtrMplsLspStatisticsEntry 71 }
vRtrMplsOutOfProfPktsFc7High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfPktsFc7High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc7."
::= { vRtrMplsLspStatisticsEntry 72 }
vRtrMplsOutOfProfOctetsFc0 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc0 indicates the number of out of
profile octets received for Forwarding Class 0."
::= { vRtrMplsLspStatisticsEntry 73 }
vRtrMplsOutOfProfOctetsFc0Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc0Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc0."
::= { vRtrMplsLspStatisticsEntry 74 }
vRtrMplsOutOfProfOctetsFc0High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc0High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc0."
::= { vRtrMplsLspStatisticsEntry 75 }
vRtrMplsOutOfProfOctetsFc1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc1 indicates the number of out of
profile octets received for Forwarding Class 1."
::= { vRtrMplsLspStatisticsEntry 76 }
vRtrMplsOutOfProfOctetsFc1Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc1Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc1."
::= { vRtrMplsLspStatisticsEntry 77 }
vRtrMplsOutOfProfOctetsFc1High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc1High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc1."
::= { vRtrMplsLspStatisticsEntry 78 }
vRtrMplsOutOfProfOctetsFc2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc2 indicates the number of out of
profile octets received for Forwarding Class 2."
::= { vRtrMplsLspStatisticsEntry 79 }
vRtrMplsOutOfProfOctetsFc2Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc2Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc2."
::= { vRtrMplsLspStatisticsEntry 80 }
vRtrMplsOutOfProfOctetsFc2High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc2High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc2."
::= { vRtrMplsLspStatisticsEntry 81 }
vRtrMplsOutOfProfOctetsFc3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc3 indicates the number of out of
profile octets received for Forwarding Class 3."
::= { vRtrMplsLspStatisticsEntry 82 }
vRtrMplsOutOfProfOctetsFc3Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc3Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc3."
::= { vRtrMplsLspStatisticsEntry 83 }
vRtrMplsOutOfProfOctetsFc3High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc3High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc3."
::= { vRtrMplsLspStatisticsEntry 84 }
vRtrMplsOutOfProfOctetsFc4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc4 indicates the number of out of
profile octets received for Forwarding Class 4."
::= { vRtrMplsLspStatisticsEntry 85 }
vRtrMplsOutOfProfOctetsFc4Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc4Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc4."
::= { vRtrMplsLspStatisticsEntry 86 }
vRtrMplsOutOfProfOctetsFc4High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc4High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc4."
::= { vRtrMplsLspStatisticsEntry 87 }
vRtrMplsOutOfProfOctetsFc5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc5 indicates the number of out of
profile octets received for Forwarding Class 5."
::= { vRtrMplsLspStatisticsEntry 88 }
vRtrMplsOutOfProfOctetsFc5Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc5Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc5."
::= { vRtrMplsLspStatisticsEntry 89 }
vRtrMplsOutOfProfOctetsFc5High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc5High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc5."
::= { vRtrMplsLspStatisticsEntry 90 }
vRtrMplsOutOfProfOctetsFc6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc6 indicates the number of out of
profile octets received for Forwarding Class 6."
::= { vRtrMplsLspStatisticsEntry 91 }
vRtrMplsOutOfProfOctetsFc6Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc6Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc6."
::= { vRtrMplsLspStatisticsEntry 92 }
vRtrMplsOutOfProfOctetsFc6High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc6High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc6."
::= { vRtrMplsLspStatisticsEntry 93 }
vRtrMplsOutOfProfOctetsFc7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc7 indicates the number of out of
profile octets received for Forwarding Class 7."
::= { vRtrMplsLspStatisticsEntry 94 }
vRtrMplsOutOfProfOctetsFc7Low32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc7Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc7."
::= { vRtrMplsLspStatisticsEntry 95 }
vRtrMplsOutOfProfOctetsFc7High32 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsOutOfProfOctetsFc7High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc7."
::= { vRtrMplsLspStatisticsEntry 96 }
vRtrMplsLspStatsPSBMatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsPSBMatch indicates if a path state block
(PSB) match was made against this LSP name."
::= { vRtrMplsLspStatisticsEntry 97 }
vRtrMplsLspStatsTpOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsTpOnly indicates whether the statistics
apply to mpls-tp lsp or for regular rsvp-te signalled terminating LSP.
The value of 'true' indicates the statistics apply to mpls-tp LSP
only.
The value of 'false' indicates the statistics apply for regular
rsvp-te signalled terminating LSP."
::= { vRtrMplsLspStatisticsEntry 98 }
vRtrMplsLspStatsLspType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
p2p (1),
p2mp (2),
autoP2p (3),
autoP2mp (4),
tpLsp (5),
srTe (6),
autoSrTe (7),
pceInitSrTe (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsLspType indicates whether the statistics
apply to MPLS-TP, P2P, P2MP, SR-TE, PCE-INIT SR-TE, Auto P2P, Auto
SR-TE or Auto P2MP LSP.
When the value of vRtrMplsLspStatsTpOnly is 'true', the statistics
apply for MPLS-TP LSP only and vRtrMplsLspStatsLspType is set to
'tpLsp'.
When the value of vRtrMplsLspStatsTpOnly is 'false', the statistics
apply for regular RSVP-TE signalled terminating LSP and the value of
vRtrMplsLspStatsLspType can be set to either p2p, p2mp, srTE,
pceInitSrTe, autoP2p, autoSrTe or autoP2mp."
::= { vRtrMplsLspStatisticsEntry 99 }
vRtrMplsLspAggregatePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAggregatePkts indicates the sum total of all
in profile and out profile packets received for all Forwarding
Classes."
::= { vRtrMplsLspStatisticsEntry 100 }
vRtrMplsLspAggregateOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAggregateOctets indicates the sum total of all
in profile and out profile octets received for all Forwarding
Classes."
::= { vRtrMplsLspStatisticsEntry 101 }
vRtrMplsLspStatsAggregateOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsAggregateOnly indicates whether or not
only aggregate statistics are available. If value of
vRtrMplsLspStatsAggregateOnly is 'true', then only aggregate
statistics are available and per fc statistics are not available. If
value of vRtrMplsLspStatsAggregateOnly is 'false', then per fc and
aggregate statistics are available."
::= { vRtrMplsLspStatisticsEntry 102 }
vRtrMplsLspStatsRateEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsRateEnabled indicates whether rate
collection is enabled for the statistics. If the value of
vRtrMplsLspStatsRateEnabled is 'true', rate in megabits per second and
packets per second is being collected for these statistics. If the
value of vRtrMplsLspStatsRateEnabled is 'false', rate is not being
collected."
::= { vRtrMplsLspStatisticsEntry 103 }
vRtrMplsLspStatsRatePkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsRatePkts indicates the average rate in
packets per second for the collection interval that ended most
recently."
::= { vRtrMplsLspStatisticsEntry 104 }
vRtrMplsLspStatsRateMbps OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspStatsRateMbps indicates the average rate in
megabits per second (Mbps) for the collection interval that ended most
recently."
::= { vRtrMplsLspStatisticsEntry 105 }
vRtrMplsLspTemplateTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateTblLastChgd indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsLspTemplateTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 40 }
vRtrMplsLspTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTemplateTable has an entry for each Labeled Switch Path
Template(LSP Template) configured for a virtual router in the system.
The table contains a list of LSP Templates that are referenced when
dynamic LSP creation is required."
::= { tmnxMplsObjs 41 }
vRtrMplsLspTemplateEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Labeled Switch Path Template (LSP
Template) configured for a virtual router in the system.
Entries in this table can be created and deleted via SNMP SET
operations."
INDEX {
vRtrID,
vRtrMplsLspTemplateName
}
::= { vRtrMplsLspTemplateTable 1 }
VRtrMplsLspTemplateEntry ::= SEQUENCE
{
vRtrMplsLspTemplateName TNamedItem,
vRtrMplsLspTemplateRowStatus RowStatus,
vRtrMplsLspTemplateLastChanged TimeStamp,
vRtrMplsLspTemplateAdminState TmnxAdminState,
vRtrMplsLspTemplateType INTEGER,
vRtrMplsLspTemplateAdaptive TruthValue,
vRtrMplsLspTemplateBandwidth Integer32,
vRtrMplsLspTemplateCspf TruthValue,
vRtrMplsLspTemplateDefaultPath MplsTunnelIndex,
vRtrMplsLspTemplateAdmGrpIncl Unsigned32,
vRtrMplsLspTemplateAdmGrpExcl Unsigned32,
vRtrMplsLspTemplateFastReroute TruthValue,
vRtrMplsLspTemplateFRMethod INTEGER,
vRtrMplsLspTemplateFRHopLimit Unsigned32,
vRtrMplsLspTemplateHopLimit Unsigned32,
vRtrMplsLspTemplateRecord INTEGER,
vRtrMplsLspTemplateRecordLabel INTEGER,
vRtrMplsLspTemplateRetryLimit Unsigned32,
vRtrMplsLspTemplateRetryTimer Unsigned32,
vRtrMplsLspTemplateCspfTeMetric TruthValue,
vRtrMplsLspTemplateLspCount Gauge32,
vRtrMplsLspTemplateMvpnRefCount Gauge32,
vRtrMplsLspTemplateFRPropAdmGrp TruthValue,
vRtrMplsLspTemplatePropAdmGrp TruthValue,
vRtrMplsLspTemplateBgpShortcut TruthValue,
vRtrMplsLspTemplateIgpShortcut TruthValue,
vRtrMplsLspTemplateLdpOverRsvp TruthValue,
vRtrMplsLspTemplateLeastFill TruthValue,
vRtrMplsLspTemplateMetric Unsigned32,
vRtrMplsLspTemplateSetupPriority Unsigned32,
vRtrMplsLspTemplateHoldPriority Unsigned32,
vRtrMplsLspTemplateVprnAutoBind TruthValue,
vRtrMplsLspTempIgpSCutLfaType INTEGER,
vRtrMplsLspTempIgpSCutRelOffset Integer32,
vRtrMplsLspTempAutoBandwidth TruthValue,
vRtrMplsLspTempFRNodeProtect TruthValue,
vRtrMplsLspTemplateEgrStats TruthValue,
vRtrMplsLspTempCollectStats TruthValue,
vRtrMplsLspTempAccntingPolicy Unsigned32,
vRtrMplsLspTemplateFromAddrType InetAddressType,
vRtrMplsLspTemplateFromAddr InetAddress,
vRtrMplsLspTemplateClassType TmnxRsvpDSTEClassType,
vRtrMplsLspTempBkupClassType TmnxRsvpDSTEClassType,
vRtrMplsLspTempBgpTransportTunn TmnxMplsLspBgpRSVPLSPTunState,
vRtrMplsLspTempMainCTRetryLimit Unsigned32,
vRtrMplsLspTemplateRsvpAdspec TruthValue,
vRtrMplsLspTempLoadBalancingWt Unsigned32,
vRtrMplsLspTempClassFwdEnabled TruthValue,
vRtrMplsLspTempFC TmnxCBFClasses,
vRtrMplsLspTempBfdTemplateName TNamedItemOrEmpty,
vRtrMplsLspTempBfdEnable TruthValue,
vRtrMplsLspTempBfdPingIntvl Unsigned32,
vRtrMplsLspTempEntropyLabel INTEGER,
vRtrMplsLspTemplatePceReport INTEGER,
vRtrMplsLspTempMaxSrLabels Unsigned32,
vRtrMplsLspTempFrrOverheadLabel Unsigned32,
vRtrMplsLspTempBfdFailureAction INTEGER,
vRtrMplsLspTempCbfFwdingPlcy TNamedItemOrEmpty,
vRtrMplsLspTempCbfFwdingSet Unsigned32,
vRtrMplsLspTemplateId Unsigned32,
vRtrMplsLspTempPathCompMeth INTEGER,
vRtrMplsLspTempMetricType INTEGER,
vRtrMplsLspTempLocalSrProt INTEGER,
vRtrMplsLspTempLabelStackRed TruthValue,
vRtrMplsLspTempBfdUpWaitTimer Unsigned32,
vRtrMplsLspTempSelfPing INTEGER,
vRtrMplsLspTempAddrFamily INTEGER,
vRtrMplsLspTemplateEgrStatsMode INTEGER
}
vRtrMplsLspTemplateName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object vRtrMplsLspTemplateName specifies the name of
the LSP Template which is used as a guideline to create and signal
multiple LSP instances when dynamic LSP creation is required."
::= { vRtrMplsLspTemplateEntry 1 }
vRtrMplsLspTemplateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateRowStatus specifies the Row Status for
this entry."
::= { vRtrMplsLspTemplateEntry 2 }
vRtrMplsLspTemplateLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateLastChanged indicates the timestamp of
last change to this row in vRtrMplsLspTemplateTable."
::= { vRtrMplsLspTemplateEntry 3 }
vRtrMplsLspTemplateAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateAdminState specifies the current
administrative state of the LSP Template."
DEFVAL { outOfService }
::= { vRtrMplsLspTemplateEntry 4 }
vRtrMplsLspTemplateType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
p2mp (1),
onehopP2P (2),
meshP2P (3),
onehopP2PSrTe (4),
meshP2PSrTe (5),
pceInitP2PSrTe (6),
onDemandP2pSrTe (8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateType specifies the type of the LSP
template.
The value of vRtrMplsLspTemplateType means:
'p2mp (1)' - auto creation of P2MP LSPs.
'onehopP2P (2)' - auto creation of one-Hop P2P LSPs.
'meshP2P (3)' - auto creation of mesh P2P LSPs.
'onehopP2PSrTe (4)'- auto creation of one-Hop P2P SrTe LSPs.
'meshP2PSrTe (5)' - auto creation of mesh P2P SrTe LSPs.
'pceInitP2PSrTe (6)'- auto creation of PCE-Initiated P2P SR-Te LSPs.
'onDemandP2pSrTe (8)' - auto creation of On-demand P2P SR-TE LSPs."
DEFVAL { unknown }
::= { vRtrMplsLspTemplateEntry 5 }
vRtrMplsLspTemplateAdaptive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateAdaptive specifies whether the
make-before-break functionality is enabled for the LSPs that are
dynamically created using this LSP template.
When the value of vRtrMplsLspTemplateAdaptive is set to 'true',
make-before-break functionality is enabled. When the value is set to
'false' make-before-break functionality is disabled."
DEFVAL { true }
::= { vRtrMplsLspTemplateEntry 6 }
vRtrMplsLspTemplateBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..6400000)
UNITS "megabps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateBandwidth specifies the amount of
bandwidth in megabits per seconds (Mbps) to be reserved for the LSPs
that are dynamically created using this LSP template. A value of zero
(0) indicates that no bandwidth is reserved."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 7 }
vRtrMplsLspTemplateCspf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspTemplateCspf specifies whether the CSPF
computation for constrained-path LSP is enabled for the LSPs that are
dynamically created using this LSP template.
When the value of vRtrMplsLspTemplateCspf is set to 'true', CSPF
computation for constrained-path is enabled. When the value is set to
'false', CSPF computation for constrained-path is disabled."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 8 }
vRtrMplsLspTemplateDefaultPath OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateDefaultPath specifies the default path
used to signal LSPs that are dynamically created using this LSP
template.
If a corresponding index does not exist in
MPLS-TE-MIB::mplsTunnelTable, an 'inconsistentValue' error will be
returned. "
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 9 }
vRtrMplsLspTemplateAdmGrpIncl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateAdmGrpIncl specifies a bit-map of
admin groups that are included when the dynamically created LSPs using
this template are setup .
If bit 'n' is set, then the admin group with value 'n' is included.
This implies that each link that the LSP goes through must be
associated with at least one of the admin groups in the include list.
By default, all admin groups are in the include list."
DEFVAL { '00000000'H }
::= { vRtrMplsLspTemplateEntry 10 }
vRtrMplsLspTemplateAdmGrpExcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateAdmGrpExcl specifies a bit-map of
admin groups that are excluded when the dynamically created LSPs using
this template are setup.
If bit 'n' is set, then the admin group with value 'n' is excluded.
This implies that each link that the LSP goes through must not be
associated with any of the admin groups in the exclude list.
By default, no admin groups are in the exclude list."
DEFVAL { '00000000'H }
::= { vRtrMplsLspTemplateEntry 11 }
vRtrMplsLspTemplateFastReroute OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateFastReroute specifies whether fast
reroute is enabled for the LSPs that are dynamically created using
this LSP template.
When the value of vRtrMplsLspTemplateFastReroute is set to 'true',
fast reroute is enabled for the LSP. When the value of
vRtrMplsLspTemplateFastReroute is set to 'false', fast reroute is
disabled."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 12 }
vRtrMplsLspTemplateFRMethod OBJECT-TYPE
SYNTAX INTEGER {
oneToOneBackup (1),
facilityBackup (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateFRMethod specifies the fast reroute
method used for the LSPs that are dynamically created using this LSP
template.
When the value of vRtrMplsLspTemplateFRMethod is set to
'oneToOneBackup', a backup LSP is established which will intersect the
original LSP somewhere downstream of the point of link or node
failure. For each LSP that is backed up, a separate backup LSP is
established.
When the value of vRtrMplsLspTemplateFRMethod is set to
'facilityBackup', Instead of creating a separate LSP for every LSP
that is to be backed up, a single LSP is created which serves as a
backup for a set of LSPs.
For LSP templates of type P2MP, oneToOneBackup is not supported."
DEFVAL { facilityBackup }
::= { vRtrMplsLspTemplateEntry 13 }
vRtrMplsLspTemplateFRHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateFRHopLimit specifies the total number
of hops a detour or backup LSP can take before merging back onto the
main LSP path."
DEFVAL { 16 }
::= { vRtrMplsLspTemplateEntry 14 }
vRtrMplsLspTemplateHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (2..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateHopLimit specifies the maximum number
of hops that a dynamically created LSP will traverse including the
ingress and egress ESRs. A LSP will not be set up if the hop limit is
exceeded."
DEFVAL { 255 }
::= { vRtrMplsLspTemplateEntry 15 }
vRtrMplsLspTemplateRecord OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateRecord specifies whether the
recording of all the hops is enabled for LSPs that are dynamically
created using this template.
When the value of vRtrMplsLspTemplateRecord is set to 'record',
recording of all the hops that a LSP traverses is enabled. When the
value of vRtrMplsLspTemplateRecord is set to 'noRecord', recording of
all the hops that a LSP traverses is disabled."
DEFVAL { record }
::= { vRtrMplsLspTemplateEntry 16 }
vRtrMplsLspTemplateRecordLabel OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateRecordLabel specifies whether the
recording of labels is enabled for LSPs that are dynamically created
using this LSP template .
When the value of vRtrMplsLspTemplateRecordLabel is set to 'record',
recording of labels at each node that a LSP traverses is enabled. When
the value of vRtrMplsLspTemplateRecordLabel is set to 'noRecord',
recording of labels at each node that a LSP traverses is disabled."
DEFVAL { record }
::= { vRtrMplsLspTemplateEntry 17 }
vRtrMplsLspTemplateRetryLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateRetryLimit specifies the maximum
number of attempts made to establish an LSP that is dynamically
created using this template. A value of zero(0) specifies that an
infinite number of retry attempts should be made."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 18 }
vRtrMplsLspTemplateRetryTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateRetryTimer specifies the time in
seconds a dynamically created Lsp waits before it attempts to
re-establish itself."
DEFVAL { 30 }
::= { vRtrMplsLspTemplateEntry 19 }
vRtrMplsLspTemplateCspfTeMetric OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspTemplateCspfTeMetric specifies whether the TE
metric is used for the purpose of the LSP path computation by CSPF
(Constrained Shortest Path First).
When the value of vRtrMplsLspTemplateCspfTeMetric is set to 'true', the
TE metric is used to compute the path of the LSP by CSPF. When the value of
vRtrMplsLspTemplateCspfTeMetric is set to 'false', IGP metric is used to
compute the path of the LSP by CSPF."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 20 }
vRtrMplsLspTemplateLspCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateLspCount indicates the number of LSPs
of type 'p2mpAuto' that are created using this template."
::= { vRtrMplsLspTemplateEntry 21 }
vRtrMplsLspTemplateMvpnRefCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateMvpnRefCount indicates the number of
MVPNs as well as number of P2MP LSP users associated to this template."
::= { vRtrMplsLspTemplateEntry 22 }
vRtrMplsLspTemplateFRPropAdmGrp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateFRPropAdmGrp specifies whether or not
the use of administrative group constraints on a FRR backup LSP is
enabled.
If vRtrMplsLspTemplateFastReroute is set to 'true', the value of
vRtrMplsLspTemplateFRPropAdmGrp specifies whether or not the
administrative group constraints are signaled in the
vRtrMplsLspTemplateFastReroute object.
If vRtrMplsLspTemplateFastReroute is set to 'false', the value of
vRtrMplsLspTemplateFRPropAdmGrp is insignificant."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 23 }
vRtrMplsLspTemplatePropAdmGrp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplatePropAdmGrp specifies whether the
propagation of session attribute object with resource affinity
(C-type 1) in PATH message is enabled for the LSPs that
are dynamically created using this LSP template.
By default, the value of vRtrMplsLspTemplatePropAdmGrp is 'false'
which specifies the session attribute object without resource affinity
(C-Type 7) is propagated in PATH message and the admin groups are
ignored on Label Switched Router(LSR) while doing CSPF calculation."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 24 }
vRtrMplsLspTemplateBgpShortcut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateBgpShortcut specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving BGP routes.
When the value of vRtrMplsLspTemplateBgpShortcut is set to 'true' the
RSVP LSP is used as a shortcut while resolving BGP routes.
When the value of vRtrMplsLspTemplateBgpShortcut is set to 'false' the
RSVP LSP is not used as a shortcut while resolving BGP routes."
DEFVAL { true }
::= { vRtrMplsLspTemplateEntry 25 }
vRtrMplsLspTemplateIgpShortcut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateIgpShortcut specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes.
When the value of vRtrMplsLspTemplateIgpShortcut is set to 'true' the
RSVP LSP is used as a shortcut while resolving IGP routes.
When the value of vRtrMplsLspTemplateIgpShortcut is set to 'false' the
RSVP LSP is not used as a shortcut while resolving IGP routes."
DEFVAL { true }
::= { vRtrMplsLspTemplateEntry 26 }
vRtrMplsLspTemplateLdpOverRsvp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateLdpOverRsvp specifies that this LSP can
be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS)
will subsequently provide LDP with all ECMP IGP next-hops and tunnel
endpoints that it considers to be the lowest cost path to the
destination. If an IGP calculation and an LDP over RSVP produce the
same cost then LDP will always prefer an LDP over RSVP tunnel over an
IGP route.
By default, static and dynamic LSPs will be included when they are
created. The default value for p2mp and bypass-only LSPs will be
'false'."
DEFVAL { true }
::= { vRtrMplsLspTemplateEntry 27 }
vRtrMplsLspTemplateLeastFill OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateLeastFill specifies whether the use of
the least-fill path selection method for the computation of the path
of this LSP template is enabled.
By default, the path of an LSP is randomly chosen among a set of equal
cost paths."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 28 }
vRtrMplsLspTemplateMetric OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP with the lowest
metric will be selected.
In LDP-over-RSVP, LDP performs a lookup in the Routing Table
Manager (RTM) which provides the next hop to the destination PE
and the advertising router (ABR or destination PE itself). If the
advertising router matches the targeted LDP peer, LDP then
performs a second lookup for the advertising router in the Tunnel
Table Manager (TTM). This lookup returns the best RSVP LSP to use
to forward packets for an LDP FEC learned through the targeted
LDP session. The lookup returns the LSP with the lowest metric.
If multiple LSPs have the same metric, then the result of the
lookup will be to select the first one available in the TTM.
A value of '0' indicates metric is not to be used."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 29 }
vRtrMplsLspTemplateSetupPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority."
DEFVAL { 7 }
::= { vRtrMplsLspTemplateEntry 30 }
vRtrMplsLspTemplateHoldPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup a
LSP. The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 31 }
vRtrMplsLspTemplateVprnAutoBind OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateVprnAutoBind specifies whether the LSP
can be used as part of the auto-bind feature for VPRN services. By
default a LSP is available for inclusion to be used for the auto-bind
feature.
By default, static and dynamic LSPs will be included when they are
created. The default value for p2mp and bypass-only LSPs will
be 'false'."
DEFVAL { true }
::= { vRtrMplsLspTemplateEntry 32 }
vRtrMplsLspTempIgpSCutLfaType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
lfaProtect (1),
lfaOnly (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempIgpSCutLfaType specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes in LFA SPF or whether to exclude or include a
RSVP LSP from being used as a LFA SPF.
When the value of vRtrMplsLspTempIgpSCutLfaType is set to 'lfaProtect'
the RSVP LSP is used as a shortcut while resolving IGP routes in LFA
SPF as well.
When the value of vRtrMplsLspTempIgpSCutLfaType is set to 'lfaOnly'
the RSVP LSP is used as a LFA SPF and not used as igp shortcut in
regular SPF.
An 'inconsistentValue' error is returned if an attempt is made to set
this object to a non-default value when the value of the object
vRtrMplsLspTemplateIgpShortcut is not set to 'true'."
DEFVAL { none }
::= { vRtrMplsLspTemplateEntry 33 }
vRtrMplsLspTempIgpSCutRelOffset OBJECT-TYPE
SYNTAX Integer32 (-10..10 | 2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempIgpSCutRelOffset specifies the the
relative offset to the IGP metric on the SPF tree.
The SPF tree is updated with the current IGP metric of the path
between the endpoints of the LSP minus the value of
vRtrMplsLspTempIgpSCutRelOffset.
The default value of 2147483647 indicates the relative metric offset
is not to be considered."
DEFVAL { 2147483647 }
::= { vRtrMplsLspTemplateEntry 34 }
vRtrMplsLspTempAutoBandwidth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the vRtrMplsLspTempAutoBandwidth specifies whether
automatic bandwidth adjustment has been enabled or disabled for this
LSP template.
A value of 'true' specifies that automatic bandwidth adjustment has
been enabled for this LSP template and a value of 'false' specifies
that automatic bandwidth adjustment has been disabled for this LSP
template."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 35 }
vRtrMplsLspTempFRNodeProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempFRNodeProtect specifies whether node
protect has been enabled or disabled for this LSP template.
A value of 'true' specifies that node protection i.e. protection
against the failure of a node on the LSP template is enabled.
A value of 'false' specifies that node protection is disabled."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 36 }
vRtrMplsLspTemplateEgrStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateEgrStats specifies whether egress
statistics has been enabled or disabled for this LSP template.
A value of 'true' specifies egress statistics is enabled on this LSP
template.
A value of 'false' specifies that egress statistics is disabled on
this LSP template."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 37 }
vRtrMplsLspTempCollectStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempCollectStats specifies whether to collect
statistics for this prefix."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 38 }
vRtrMplsLspTempAccntingPolicy OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAccntingPolicy specifies the accounting
policy to be used for this entry.
A value of zero indicates that the default accounting policy should be
used."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 39 }
vRtrMplsLspTemplateFromAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateFromAddrType specifies the IP address
type of vRtrMplsLspTemplateFromAddr."
DEFVAL { unknown }
::= { vRtrMplsLspTemplateEntry 40 }
vRtrMplsLspTemplateFromAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vRtrMplsLspTemplateFromAddr specifies the source address of this
LSP template.
The address type of vRtrMplsLspTemplateFromAddr is specified by
vRtrMplsLspTemplateFromAddrType.
When vRtrMplsLspTemplateFromAddr has not been explicitly set, the
system IP address will be used."
DEFVAL { ''H }
::= { vRtrMplsLspTemplateEntry 41 }
vRtrMplsLspTemplateClassType OBJECT-TYPE
SYNTAX TmnxRsvpDSTEClassType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateClassType specifies the class type
(CT) associated with this LSP template."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 42 }
vRtrMplsLspTempBkupClassType OBJECT-TYPE
SYNTAX TmnxRsvpDSTEClassType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBkupClassType specifies the backup class
type (CT) associated with this LSP template."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 43 }
vRtrMplsLspTempBgpTransportTunn OBJECT-TYPE
SYNTAX TmnxMplsLspBgpRSVPLSPTunState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBgpTransportTunn specifies whether an RSVP
LSP is allowed or blocked in its usage as a transport LSP for BGP
tunnel routes.
When the value of vRtrMplsLspTempBgpTransportTunn is set to 'include'
an RSVP LSP is allowed to be used as a transport LSP for BGP tunnel
routes. When the value of vRtrMplsLspTempBgpTransportTunn is set to
'exclude' an RSVP LSP is not allowed to be used as a transport LSP for
BGP tunnel routes."
DEFVAL { include }
::= { vRtrMplsLspTemplateEntry 44 }
vRtrMplsLspTempMainCTRetryLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempMainCTRetryLimit specifies the number of
attempts the software should make before it can start using the backup
class type."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 45 }
vRtrMplsLspTemplateRsvpAdspec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateRsvpAdspec specifies whether or not
the ADSPEC object will be included in RSVP messages.
When the value of vRtrMplsLspTemplateRsvpAdspec is 'true', the ADSPEC
object will be included in RSVP messages.
When the value of vRtrMplsLspTemplateRsvpAdspec is 'false', the ADSPEC
object will not be included in RSVP messages."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 46 }
vRtrMplsLspTempLoadBalancingWt OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempLoadBalancingWt specifies the load
balancing weight applied to this Labeled Switch Path(LSP) template.
When a system level load-balancing command is enabled, packets
forwarded to a set of ECMP tunnel next-hops will be sprayed using this
weight configured for this LSP template."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 47 }
vRtrMplsLspTempClassFwdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempClassFwdEnabled specifies whether class
based forwarding over this MPLS LSP template is enabled or not."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 48 }
vRtrMplsLspTempFC OBJECT-TYPE
SYNTAX TmnxCBFClasses
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspTempFC specifies a set of forwarding classes
configured for this LSP template expressed as a bit map. If a bit from
0 through 7 is set, then the corresponding forwarding class has been
configured for this LSP template. If bit 8 is set, this LSP template
has been designated as the default forwarding LSP."
DEFVAL { {} }
::= { vRtrMplsLspTemplateEntry 49 }
vRtrMplsLspTempBfdTemplateName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP template."
::= { vRtrMplsLspTemplateEntry 50 }
vRtrMplsLspTempBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBfdEnable specifies whether BFD is enabled
or not for this LSP template."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 51 }
vRtrMplsLspTempBfdPingIntvl OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBfdPingIntvl specifies the time interval
for periodic LSP ping for BFD bootstrapping.
The object vRtrMplsLspTempBfdPingIntvl is applicable to LSP templates
with vRtrMplsLspTemplateType set to 'oneHopP2P' or 'meshP2P'.
When the value of vRtrMplsLspTempBfdPingIntvl is set to '0', it
disables LSP pings for BFD bootstrapping."
DEFVAL { 60 }
::= { vRtrMplsLspTemplateEntry 52 }
vRtrMplsLspTempEntropyLabel OBJECT-TYPE
SYNTAX INTEGER {
forceDisable (1),
enable (2),
inherit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempEntropyLabel specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for this LSP template.
When the value of vRtrMplsLspTempEntropyLabel is set to 'enable', the
application will account for EL/ELC in the label stack without taking
into consideration the value of the enabled ELC.
When the value of vRtrMplsLspTempEntropyLabel is set to
'force-disable' , the application will ignore the value of enabled
ELC.
When the value of vRtrMplsLspTempEntropyLabel is modified, Entropy
Label will become operational when this LSP template is resignalled.
By default, if this LSP template is of type RSVP-TE it will inherit
the behavior as set by vRtrMplsGeneralEntropyLblRsvpTe, or if the LSP
template is of type SR-TE it will inherit from
vRtrMplsGeneralEntropyLblSrTe."
DEFVAL { inherit }
::= { vRtrMplsLspTemplateEntry 53 }
vRtrMplsLspTemplatePceReport OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
inherit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplatePceReport specifies whether to
override the global configuration of reporting of LSP Template to PCE.
If the value of vRtrMplsLspTemplatePceReport is 'disabled' for an LSP
Template either due to inheritance or due to LSP template level
configuration, the value of vRtrMplsLspTemplatePceReport has no
effect. "
DEFVAL { inherit }
::= { vRtrMplsLspTemplateEntry 54 }
vRtrMplsLspTempMaxSrLabels OBJECT-TYPE
SYNTAX Unsigned32 (1..11)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempMaxSrLabels specifies maximum segment
routing label stack size for this LSP template.
The default IXR platform is 3 and maximum value supported is 5."
DEFVAL { 6 }
::= { vRtrMplsLspTemplateEntry 55 }
vRtrMplsLspTempFrrOverheadLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempFrrOverheadLabel specifies maximum
additional overhead labels for this LSP template."
DEFVAL { 1 }
::= { vRtrMplsLspTemplateEntry 56 }
vRtrMplsLspTempBfdFailureAction OBJECT-TYPE
SYNTAX INTEGER {
none (0),
down (1),
failoverOrDown (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBfdFailureAction specifies the actions to
be taken when this LSP template session fails.
When vRtrMplsLspTempBfdFailureAction is set to down, it prevents the
LSP template from being made available as a transport for any user.
When vRtrMplsLspTempBfdFailureAction is set to failoverOrDown, and the
BFD session associated with the active-path of a related LSP goes
down, the LSP will switch to the standby-path if applicable. When the
LSP cannot switchover, the LSP will go operationally down."
DEFVAL { none }
::= { vRtrMplsLspTemplateEntry 57 }
vRtrMplsLspTempCbfFwdingPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempCbfFwdingPlcy specifies the name of the
Class Forwarding Policy for this LSP Template instance."
DEFVAL { "" }
::= { vRtrMplsLspTemplateEntry 58 }
vRtrMplsLspTempCbfFwdingSet OBJECT-TYPE
SYNTAX Unsigned32 (0..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempCbfFwdingSet specifies the Class
Forwarding Set ID for this LSP Template instance. If system profile is
profile-b then valid range is 0..6 else 0..4"
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 59 }
vRtrMplsLspTemplateId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateId specifies the identifier
for pce-init LSPs using this template are setup."
DEFVAL { 0 }
::= { vRtrMplsLspTemplateEntry 60 }
vRtrMplsLspTempPathCompMeth OBJECT-TYPE
SYNTAX INTEGER {
none (1),
localCspf (2),
pce (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempPathCompMeth specifies LSP path
computation method.
If the value of vRtrMplsLspTempPathCompMeth is 'localCspf', local CSPF
will be used to compute the path for LSPs using this template.
If the value of vRtrMplsLspTempPathCompMeth is 'pce', Path Computation
Engine (PCE) will be used to compute the path for LSPs using this
template.
The default value for vRtrMplsLspTempPathCompMeth is 'none'."
DEFVAL { none }
::= { vRtrMplsLspTemplateEntry 61 }
vRtrMplsLspTempMetricType OBJECT-TYPE
SYNTAX INTEGER {
igp (1),
te (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempMetricType specifies metric type.
If the value of vRtrMplsLspTempMetricType is 'igp', the metric used is
IGP.
If the value of vRtrMplsLspTempMetricType is 'te', the metric used is
TE.
The default value for vRtrMplsLspTempMetricType is 'igp'."
DEFVAL { igp }
::= { vRtrMplsLspTemplateEntry 62 }
vRtrMplsLspTempLocalSrProt OBJECT-TYPE
SYNTAX INTEGER {
none (1),
preferred (2),
mandatory (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempLocalSrProt specifies the local SR
protection.
If the value of vRtrMplsLspTempLocalSrProt is 'none', there is no
protection.
If the value of vRtrMplsLspTempLocalSrProt is 'preferred', the
protection is preferred.
If the value of vRtrMplsLspTempLocalSrProt is 'mandatory', the
protection is mandatory.
The default value for vRtrMplsLspTempLocalSrProt is 'none'."
DEFVAL { preferred }
::= { vRtrMplsLspTemplateEntry 63 }
vRtrMplsLspTempLabelStackRed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempLabelStackRed specifies whether label
stack reduction is enabled."
DEFVAL { false }
::= { vRtrMplsLspTemplateEntry 64 }
vRtrMplsLspTempBfdUpWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempBfdUpWaitTimer specifies the time in
seconds the software will wait for BFD to come up.
The timer object is applicable only when
vRtrMplsLspTempBfdFailureAction is set to 'failoverOrDown'.
The timer object is applicable for LSP templates with
vRtrMplsLspTemplateType set to 'oneHopP2PSrTe', 'meshP2PSrTe' or
pceInitP2PSrte'.
The timer is started when BFD is first enabled on a path or BFD
transitions from up to down. When this timer expires and if BFD has
not yet come up, the path is torn down by removing it from TTM and
the IOM and the retry timer is started."
DEFVAL { 4 }
::= { vRtrMplsLspTemplateEntry 65 }
vRtrMplsLspTempSelfPing OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
inherit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempSelfPing specifies whether to override the
global configuration of Self Ping.
If the value of vRtrMplsLspTempSelfPing is 'disabled' for an LSP
template entry either due to inheritance or due to lsp template level
configuration, the value of vRtrMplsLspTempSelfPing has no affect.
The default value for vRtrMplsLspTempSelfPing is 'inherit'."
DEFVAL { inherit }
::= { vRtrMplsLspTemplateEntry 66 }
vRtrMplsLspTempAddrFamily OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAddrFamily specifies the address family
type used for SR-TE LSP templates.
If the value of vRtrMplsLspTempAddrFamily is 'ipv4' for an LSP
template entry is using an ipv4 address.
If the value of vRtrMplsLspTempAddrFamily is 'ipv6' for an LSP
template entry is using an ipv6 address."
DEFVAL { ipv4 }
::= { vRtrMplsLspTemplateEntry 67 }
vRtrMplsLspTemplateEgrStatsMode OBJECT-TYPE
SYNTAX INTEGER {
per-fc (0),
aggregate (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplateEgrStatsMode specifies whether
statistics are per-fc or aggregate.
If the value of vRtrMplsLspTemplateEgrStatsMode is 'per-fc' means
collected stats will be per forwarding class.
If the value of vRtrMplsLspTemplateEgrStatsMode is 'aggregate' means
collected stats will be aggregated."
DEFVAL { per-fc }
::= { vRtrMplsLspTemplateEntry 68 }
vRtrMplsLspAutoBWTableLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWTableLastChg indicates the sysUpTime at
the time of the last modification to vRtrMplsLspAutoBandwidthTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 42 }
vRtrMplsLspAutoBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspAutoBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspAutoBandwidthTable has an entry for auto bandwidth
configuration for each Labeled Switch Path (LSP) configured for a
virtual router in the system."
::= { tmnxMplsObjs 43 }
vRtrMplsLspAutoBandwidthEntry OBJECT-TYPE
SYNTAX VRtrMplsLspAutoBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents auto bandwidth configuration for a Labeled
Switch Path (LSP) configured for a virtual router in the system."
INDEX {
vRtrID,
vRtrMplsLspAutoBWLspName
}
::= { vRtrMplsLspAutoBandwidthTable 1 }
VRtrMplsLspAutoBandwidthEntry ::= SEQUENCE
{
vRtrMplsLspAutoBWLspName TLNamedItem,
vRtrMplsLspAutoBWLastChange TimeStamp,
vRtrMplsLspAutoBWAdjDNPercent Unsigned32,
vRtrMplsLspAutoBWAdjDNMbps TmnxMplsLspBandwidth,
vRtrMplsLspAutoBWAdjMultiplier Unsigned32,
vRtrMplsLspAutoBWAdjUPPercent Unsigned32,
vRtrMplsLspAutoBWAdjUPMbps TmnxMplsLspBandwidth,
vRtrMplsLspAutoBWMaxBW TmnxMplsLspBandwidth,
vRtrMplsLspAutoBWMinBW TmnxMplsLspBandwidth,
vRtrMplsLspAutoBWMonitorBW TruthValue,
vRtrMplsLspAutoBWOverFlow Unsigned32,
vRtrMplsLspAutoBWOvrFlwThreshold Unsigned32,
vRtrMplsLspAutoBWOvrFlwBW TmnxMplsLspBandwidth,
vRtrMplsLspAutoBWSampMultiplier Unsigned32,
vRtrMplsLspAutoBWSampTime Unsigned32,
vRtrMplsLspAutoBWLastAdj TimeStamp,
vRtrMplsLspAutoBWLastAdjCause TmnxMplsLspAutoBWLastAdjCause,
vRtrMplsLspAutoBWNextAdj Unsigned32,
vRtrMplsLspAutoBWMaxAvgRate Unsigned32,
vRtrMplsLspAutoBWLastAvgRate Unsigned32,
vRtrMplsLspAutoBWInheritance Unsigned32,
vRtrMplsLspAutoBWCurrentBW Unsigned32,
vRtrMplsLspAutoBWAdjTime Unsigned32,
vRtrMplsLspAutoBWOvrFlwCount Unsigned32,
vRtrMplsLspAutoBWSampCount Unsigned32,
vRtrMplsLspAutoBWAdjCount Unsigned32,
vRtrMplsLspAutoBWOperState TmnxEnabledDisabled,
vRtrMplsLspAutoBWSampInterval Unsigned32,
vRtrMplsLspAutoBWBeWeight Unsigned32,
vRtrMplsLspAutoBWL2Weight Unsigned32,
vRtrMplsLspAutoBWAfWeight Unsigned32,
vRtrMplsLspAutoBWL1Weight Unsigned32,
vRtrMplsLspAutoBWH2Weight Unsigned32,
vRtrMplsLspAutoBWEfWeight Unsigned32,
vRtrMplsLspAutoBWH1Weight Unsigned32,
vRtrMplsLspAutoBWNcWeight Unsigned32,
vRtrMplsLspAutoBWUnderFlow Unsigned32,
vRtrMplsLspAutoBWUndFlwThreshold Unsigned32,
vRtrMplsLspAutoBWUndFlwBW TmnxMplsLspBandwidth,
vRtrMplsLspAutoBWUndFlwCount Counter32,
vRtrMplsLspAutoBWMaxUndFlwBw Unsigned32,
vRtrMplsLspAutoBWUseLastAdjBW TruthValue,
vRtrMplsLspAutoBWSecRetryLimit Unsigned32,
vRtrMplsLspAutoBWLastAdjBW Integer32
}
vRtrMplsLspAutoBWLspName OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWLspName uniquely identifies a row in the
vRtrMplsLspAutoBandwidthTable.
If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p',
vRtrMplsLspAutoBWLspName can have a maximum of 32 characters."
::= { vRtrMplsLspAutoBandwidthEntry 1 }
vRtrMplsLspAutoBWLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsLspAutoBandwidthEntry 2 }
vRtrMplsLspAutoBWAdjDNPercent OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjDNPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as a percentage of
the current bandwidth, for decreasing the bandwidth of the LSP. At the
adjust interval expiry, if the measured bandwidth falls below the
current bandwidth by the value of vRtrMplsLspAutoBWAdjDNPercent it can
cause a resignaling attempt for the LSP
When the value of vRtrMplsLspAutoBWAdjDNPercent is 0 it means that
this threshold check is always true for any measured bandwidth less
than current bandwidth"
DEFVAL { 5 }
::= { vRtrMplsLspAutoBandwidthEntry 3 }
vRtrMplsLspAutoBWAdjDNMbps OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as an absolute
bandwidth (Mbps), for decreasing the bandwidth of the LSP."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 4 }
vRtrMplsLspAutoBWAdjMultiplier OBJECT-TYPE
SYNTAX Unsigned32 (1..16383)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjMultiplier specifies the number of
collection intervals in the adjust interval.
The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and
vRtrMplsLspAutoBWAdjCount."
DEFVAL { 288 }
::= { vRtrMplsLspAutoBandwidthEntry 5 }
vRtrMplsLspAutoBWAdjUPPercent OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjUPPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as a percentage of
the current bandwidth, for increasing the bandwidth of the LSP. At the
adjust interval expiry, if the measured bandwidth exceeds the current
bandwidth by the value of vRtrMplsLspAutoBWAdjUPPercent it can cause a
resignaling attempt for the LSP
When the value of vRtrMplsLspAutoBWAdjUPPercent is 0 it means that
this threshold check is always true for any measured bandwidth greater
than current bandwidth"
DEFVAL { 5 }
::= { vRtrMplsLspAutoBandwidthEntry 6 }
vRtrMplsLspAutoBWAdjUPMbps OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjUPMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as an absolute
bandwidth (Mbps), for increasing the bandwidth of the LSP."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 7 }
vRtrMplsLspAutoBWMaxBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWMaxBW specifies the maximum that
auto-bandwidth allocation is allowed to request for a LSP."
DEFVAL { 100000 }
::= { vRtrMplsLspAutoBandwidthEntry 8 }
vRtrMplsLspAutoBWMinBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWMinBW specifies the minimum that
auto-bandwidth allocation is allowed to request for a LSP."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 9 }
vRtrMplsLspAutoBWMonitorBW OBJECT-TYPE
SYNTAX TruthValue
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWMonitorBW specifies whether the
collection and display of auto-bandwidth measurements is enabled or
disabled for the LSP.
When the value of vRtrMplsLspAutoBWMonitorBW is 'true' the collection
and display of auto-bandwidth measurements is enabled and when the
value is 'false' it is disabled."
DEFVAL { false }
::= { vRtrMplsLspAutoBandwidthEntry 10 }
vRtrMplsLspAutoBWOverFlow OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWOverFlow specifies number of overflow
samples that triggers an overflow auto-bandwidth adjustment attempt."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 11 }
vRtrMplsLspAutoBWOvrFlwThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWOvrFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an overflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 12 }
vRtrMplsLspAutoBWOvrFlwBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWOvrFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbps), for counting an
overflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 13 }
vRtrMplsLspAutoBWSampMultiplier OBJECT-TYPE
SYNTAX Unsigned32 (1..511)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWSampMultiplier specifies the multiplier
for collection intervals in a sample interval."
DEFVAL { 1 }
::= { vRtrMplsLspAutoBandwidthEntry 14 }
vRtrMplsLspAutoBWSampTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWSampTime indicates the sample multiplier
times the collection interval."
::= { vRtrMplsLspAutoBandwidthEntry 15 }
vRtrMplsLspAutoBWLastAdj OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWLastAdj indicates the system time for
the last auto-bandwidth adjustment."
::= { vRtrMplsLspAutoBandwidthEntry 16 }
vRtrMplsLspAutoBWLastAdjCause OBJECT-TYPE
SYNTAX TmnxMplsLspAutoBWLastAdjCause
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWLastAdjCause indicates the cause for the
last auto-bandwidth adjustment."
::= { vRtrMplsLspAutoBandwidthEntry 17 }
vRtrMplsLspAutoBWNextAdj OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWNextAdj indicates the system time when
then adjust-timer will expire."
::= { vRtrMplsLspAutoBandwidthEntry 18 }
vRtrMplsLspAutoBWMaxAvgRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWMaxAvgRate indicates the maximum average
data rate in any sample interval of the current adjust interval."
::= { vRtrMplsLspAutoBandwidthEntry 19 }
vRtrMplsLspAutoBWLastAvgRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWLastAvgRate indicates the average data
rate in the sample interval that ended most recently."
::= { vRtrMplsLspAutoBandwidthEntry 20 }
vRtrMplsLspAutoBWInheritance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspAutoBWInheritance that controls whether
to inherit the operational value of the object or use the
administratively set value.
This object is a bit-mask, with the following positions:
vRtrMplsLspAutoBWAdjMultiplier 0x1
vRtrMplsLspAutoBWSampMultiplier 0x2
When the bit for an object is set to one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value is.
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrMplsGeneralTable."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 21 }
vRtrMplsLspAutoBWCurrentBW OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWCurrentBW indicates the current
bandwidth reserved along the primary path."
::= { vRtrMplsLspAutoBandwidthEntry 22 }
vRtrMplsLspAutoBWAdjTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjTime indicates the adjust multiplier
times the collection interval."
::= { vRtrMplsLspAutoBandwidthEntry 23 }
vRtrMplsLspAutoBWOvrFlwCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWOvrFlwCount indicates the number of
overflow samples since the last reset."
::= { vRtrMplsLspAutoBandwidthEntry 24 }
vRtrMplsLspAutoBWSampCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWSampCount indicates the count in the
sample interval."
::= { vRtrMplsLspAutoBandwidthEntry 25 }
vRtrMplsLspAutoBWAdjCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAdjCount indicates the count in the
adjust interval."
::= { vRtrMplsLspAutoBandwidthEntry 26 }
vRtrMplsLspAutoBWOperState OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWOperState indicates the operational
status for the LSP."
::= { vRtrMplsLspAutoBandwidthEntry 27 }
vRtrMplsLspAutoBWSampInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWSampInterval indicates the number of
sample intervals."
::= { vRtrMplsLspAutoBandwidthEntry 28 }
vRtrMplsLspAutoBWBeWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWBeWeight specifies the weight in percent
for forwarding class 'BE' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 29 }
vRtrMplsLspAutoBWL2Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWL2Weight specifies the weight in percent
for forwarding class 'L2' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 30 }
vRtrMplsLspAutoBWAfWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWAfWeight specifies the weight in percent
for forwarding class 'AF' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 31 }
vRtrMplsLspAutoBWL1Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWL1Weight specifies the weight in percent
for forwarding class 'L1' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 32 }
vRtrMplsLspAutoBWH2Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWH2Weight specifies the weight in percent
for forwarding class 'H2' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 33 }
vRtrMplsLspAutoBWEfWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWEfWeight specifies the weight in percent
for forwarding class 'EF' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 34 }
vRtrMplsLspAutoBWH1Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWH1Weight specifies the weight in percent
for forwarding class 'H1' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 35 }
vRtrMplsLspAutoBWNcWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWNcWeight specifies the weight in percent
for forwarding class 'NC' for the LSP."
DEFVAL { 100 }
::= { vRtrMplsLspAutoBandwidthEntry 36 }
vRtrMplsLspAutoBWUnderFlow OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWUnderFlow specifies the number of
underflow samples that triggers an underflow auto-bandwidth adjustment
attempt."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 37 }
vRtrMplsLspAutoBWUndFlwThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWUndFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an underflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 38 }
vRtrMplsLspAutoBWUndFlwBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWUndFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbps), for counting an
underflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspAutoBandwidthEntry 39 }
vRtrMplsLspAutoBWUndFlwCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWUndFlwCount indicates the number of
underflow samples since the last reset."
::= { vRtrMplsLspAutoBandwidthEntry 40 }
vRtrMplsLspAutoBWMaxUndFlwBw OBJECT-TYPE
SYNTAX Unsigned32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWMaxUndFlwBw indicates the maximum
sampled bandwidth in the most recent consecutive underflow samples."
::= { vRtrMplsLspAutoBandwidthEntry 41 }
vRtrMplsLspAutoBWUseLastAdjBW OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWUseLastAdjBW specifies whether use of
last adjusted bandwidth is enabled or diabled.
When the value is 'true' the use of last adjusted bandwidth is
enabled, and LSP paths will be signalled with the last adjusted
bandwidth of the LSP and not the configured bandwidth."
DEFVAL { false }
::= { vRtrMplsLspAutoBandwidthEntry 42 }
vRtrMplsLspAutoBWSecRetryLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWSecRetryLimit specifies the max number
of retry attempts that will be made to signal the secondary path with
the last adjusted bandwidth. After the number of retry attempts is
exceeded, no more attempts will be made to resignal the secondary path
and the path will remain operationally down. A value of zero(0)
specifies that the retry limit is infinite.
This variable is valid only if vRtrMplsLspAutoBWUseLastAdjBW is set to
'enabled'."
DEFVAL { 5 }
::= { vRtrMplsLspAutoBandwidthEntry 43 }
vRtrMplsLspAutoBWLastAdjBW OBJECT-TYPE
SYNTAX Integer32
UNITS "megabps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAutoBWLastAdjBW indicates the last adjusted
bandwidth for the LSP. A value of -1 indicates that this value is
invalid"
::= { vRtrMplsLspAutoBandwidthEntry 44 }
vRtrMplsLspPathOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspPathOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspPathOperTable has an entry for an association between a
Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or
tunnel) entry in the mplsTunnelTable."
::= { tmnxMplsObjs 44 }
vRtrMplsLspPathOperEntry OBJECT-TYPE
SYNTAX VRtrMplsLspPathOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an operational status for an association
between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path
(or tunnel) entry in the mplsTunnelTable.
Entries cannot be created and deleted via SNMP SET operations.
A row entry will have valid operational status info when
vRtrMplsLspPathOperState is set to inService."
AUGMENTS { vRtrMplsLspPathEntry }
::= { vRtrMplsLspPathOperTable 1 }
VRtrMplsLspPathOperEntry ::= SEQUENCE
{
vRtrMplsLspPathOperSetupPriority Unsigned32,
vRtrMplsLspPathOperHoldPriority Unsigned32,
vRtrMplsLspPathOperRecord INTEGER,
vRtrMplsLspPathOperRecordLabel INTEGER,
vRtrMplsLspPathOperHopLimit Unsigned32,
vRtrMplsLspPathOperAdminGrpIncl Unsigned32,
vRtrMplsLspPathOperAdminGrExcld Unsigned32,
vRtrMplsLspPathOperCspf TruthValue,
vRtrMplsLspPathOperCspfToFrstLs TruthValue,
vRtrMplsLspPathOperLeastFill TruthValue,
vRtrMplsLspPathOperRsvpAdspec TruthValue,
vRtrMplsLspPathOperFRNodeProtect TruthValue,
vRtrMplsLspPathOperPropAdminGrp TruthValue,
vRtrMplsLspPathOperFRHopLimit Unsigned32,
vRtrMplsLspPathOperFRPropAdmGrp TruthValue,
vRtrMplsLspPathOperInterArea TruthValue,
vRtrMplsLspPathOperCompMeth INTEGER,
vRtrMplsLspPathOperMetricType INTEGER,
vRtrMplsLspPathOperLocalSrProt INTEGER,
vRtrMplsLspPathOperLabelStackRed INTEGER,
vRtrMplsLspPathNgFNAddrType InetAddressType,
vRtrMplsLspPathNgFNAddr InetAddress
}
vRtrMplsLspPathOperSetupPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperSetupPriority indicates the setup
priority used by the operational LSP path.
When make-before-break functionality for the LSP is enabled and if the
path setup priority is changed, the resources allocated to the
existing LSP paths will not be released until a new path with the new
setup priority settings has been established. While a new path is
being signaled, the administrative value and the operational values of
the path setup priority may differ. The value of
vRtrMplsLspPathSetupPriority specifies the setup priority for the new
LSP path trying to be established whereas the value of
vRtrMplsLspPathOperSetupPriority specifies the setup priority for the
existing LSP path."
::= { vRtrMplsLspPathOperEntry 1 }
vRtrMplsLspPathOperHoldPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperHoldPriority indicates the hold
priority used by the operational LSP path.
When make-before-break functionality for the LSP is enabled and if the
path hold priority is changed, the resources allocated to the existing
LSP paths will not be released until a new path with the new hold
priority settings has been established. While a new path is being
signaled, the administrative value and the operational values of the
path hold priority may differ. The value of
vRtrMplsLspPathHoldPriority specifies the hold priority for the new
LSP path trying to be established whereas the value of
vRtrMplsLspPathOperHoldPriority specifies the hold priority for the
existing LSP path."
::= { vRtrMplsLspPathOperEntry 2 }
vRtrMplsLspPathOperRecord OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperRecord indicates whether the
operational LSP path is recording or not recording all the traversed
hops.
When make-before-break functionality for the LSP is enabled and if the
path hops recording setting is changed, the resources allocated to the
existing LSP paths will not be released until a new path with the new
settings has been established. While a new path is being signaled, the
administrative value and the operational values of hops recording
setting of the path may differ. The value of vRtrMplsLspPathRecord
specifies the hops recording setting for the new LSP path trying to be
established whereas the value of vRtrMplsLspPathOperRecord specifies
the hops recording setting for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 3 }
vRtrMplsLspPathOperRecordLabel OBJECT-TYPE
SYNTAX INTEGER {
record (1),
noRecord (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperRecordLabel indicates whether the
currently operational LSP path is recording or not recording the label
allocated at each traversed node.
When make-before-break functionality for the LSP is enabled and if the
path label recording setting is changed, the resources allocated to
the existing LSP paths will not be released until a new path with the
new settings has been established. While a new path is being signaled,
the administrative value and the operational values of label recording
setting of the path may differ. The value of
vRtrMplsLspPathRecordLabel specifies the label recording setting for
the new LSP path trying to be established whereas the value of
vRtrMplsLspPathOperRecordLabel specifies the label recording setting
for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 4 }
vRtrMplsLspPathOperHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (2..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperHopLimit indicates the maximum hops
limit used by the currently operational LSP path.
When make-before-break functionality for the LSP is enabled and if the
hop limit is changed at either LSP or LSP path level, the resources
allocated to the existing LSP paths will not be released until a new
path with the new settings has been established. While a new path is
being signaled, the administrative value and the operational values of
the path hop limit may differ. The value of either vRtrMplsLspHopLimit
or vRtrMplsLspPathHopLimit specifies the hop limit for the new LSP
path trying to be established whereas the value of
vRtrMplsLspPathOperHopLimit specifies the hop limit for the existing
LSP path."
::= { vRtrMplsLspPathOperEntry 5 }
vRtrMplsLspPathOperAdminGrpIncl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperAdminGrpIncl is a bit-map which
indicates a list of admin groups included by the currently operational
LSP path.
When make-before-break functionality for the LSP is enabled and if
the list of included admin groups is changed at either LSP or LSP
path level, the resources allocated to the existing LSP paths will
not be released until a new path with the new settings has been
established. While a new path is being signaled, the
administrative value and the operational values of the path may
differ. The value of either vRtrMplsLspAdminGroupInclude or
vRtrMplsLspPathAdminGroupInclude specifies the include admin groups
bit-map for the new LSP path trying to be established whereas the
value of vRtrMplsLspPathOperAdminGrpIncl specifies the include admin
groups bit-map for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 6 }
vRtrMplsLspPathOperAdminGrExcld OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperAdminGrExcld is a bit-map which
indicates a list of admin groups excluded by the currently operational
LSP path.
When make-before-break functionality for the LSP is enabled and if the
list of excluded admin groups is changed at either LSP or LSP path
level, the resources allocated to the existing LSP paths will not be
released until a new path with the new settings has been established.
While a new path is being signaled, the administrative value and the
operational values of the path may differ. The value of either
vRtrMplsLspAdminGroupExclude or vRtrMplsLspPathAdminGroupExclude
specifies the exclude admin groups bit-map for the new LSP path trying
to be established whereas the value of vRtrMplsLspPathOperAdminGrExcld
specifies the exclude admin groups bit-map for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 7 }
vRtrMplsLspPathOperCspf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspPathOperCspf indicates whether the currently
operational LSP path has used CSPF computation for constrained-path
enabled or disabled.
When make-before-break functionality for the LSP is enabled and if the
LSP CSPF setting is changed, the resources allocated to the existing
LSP paths will not be released until a new path with the new settings
has been established. While a new path is being signaled, the
administrative value and the operational values of the path may
differ. The value of vRtrMplsLspCspf specifies the CSPF setting for
the new LSP path trying to be established whereas the value of
vRtrMplsLspPathOperCspf specifies the CSPF setting for the existing
LSP path."
::= { vRtrMplsLspPathOperEntry 8 }
vRtrMplsLspPathOperCspfToFrstLs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspPathOperCspfToFrstLs indicates whether the
currently operational LSP path had CSPF to first loose hop enabled or
disabled.
When make-before-break functionality for the LSP is enabled and if the
LSP CSPF to First Loose Hop setting is changed, the resources
allocated to the existing LSP paths will not be released until a new
path with the new settings has been established. While a new path is
being signaled, the administrative value and the operational values of
the path may differ. The value of vRtrMplsLspCspfToFirstLoose
specifies the CSPF to First Loose Hop setting for the new LSP path
trying to be established whereas the value of
vRtrMplsLspPathOperCspfToFrstLs specifies the CSPF to First Loose Hop
setting for the existing LSP path.
This object was deprecated in the 11.0 release."
::= { vRtrMplsLspPathOperEntry 9 }
vRtrMplsLspPathOperLeastFill OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperLeastFill indicates whether the
currently operational LSP path was computed with the least-fill path
selection method.
When make-before-break functionality for the LSP is enabled and if the
LSP least-fill setting is changed, the resources allocated to the
existing LSP paths will not be released until a new path with the new
settings has been established. While a new path is being signaled, the
administrative value and the operational values of the path may
differ. The value of vRtrMplsLspLeastFill specifies the least-fill
setting for the new LSP path trying to be established whereas the
value of vRtrMplsLspPathOperLeastFill specifies the least-fill setting
for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 10 }
vRtrMplsLspPathOperRsvpAdspec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperRsvpAdspec indicates whether the
currently operational LSP path has ADSPEC object included in RSVP
messages or not.
When make-before-break functionality for the LSP is enabled and if the
LSP adspec setting is changed, the resources allocated to the existing
LSP paths will not be released until a new path with the new settings
has been established. While a new path is being signaled, the
administrative value and the operational values of the path may
differ. The value of vRtrMplsLspRsvpAdspec specifies the adspec
setting for the new LSP path trying to be established whereas the
value of vRtrMplsLspPathOperRsvpAdspec specifies the adspec setting
for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 11 }
vRtrMplsLspPathOperFRNodeProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperFRNodeProtect indicates whether the
currently operational LSP path has node protection enabled or
disabled.
When make-before-break functionality for the LSP is enabled and if the
LSP node protection setting is changed, the resources allocated to the
existing LSP paths will not be released until a new path with the new
settings has been established. While a new path is being signaled, the
administrative value and the operational values of the path may
differ. The value of vRtrMplsLspFRNodeProtect specifies the node
protection setting for the new LSP path trying to be established
whereas the value of vRtrMplsLspPathOperFRNodeProtect specifies the
node protection setting for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 12 }
vRtrMplsLspPathOperPropAdminGrp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperPropAdminGrp indicates whether the
currently operational LSP path has propagation admin groups enabled or
disabled.
When make-before-break functionality for the LSP is enabled and if the
LSP propagate admin groups setting is changed, the resources allocated
to the existing LSP paths will not be released until a new path with
the new settings has been established. While a new path is being
signaled, the administrative value and the operational values of the
path may differ. The value of vRtrMplsLspPropAdminGroup specifies the
propagate admin groups setting for the new LSP path trying to be
established whereas the value of vRtrMplsLspPathOperPropAdminGrp
specifies the propagate admin groups setting for the existing LSP
path."
::= { vRtrMplsLspPathOperEntry 13 }
vRtrMplsLspPathOperFRHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperFRHopLimit indicates the total number
of hops to be used by detour LSP before merging to currently
operational LSP path.
When make-before-break functionality for the LSP is enabled and if the
LSP FR Hop Limit setting is changed, the resources allocated to the
existing LSP paths will not be released until a new path with the new
settings has been established. While a new path is being signaled, the
administrative value and the operational values of the path may
differ. The value of vRtrMplsLspFRHopLimit specifies the FR Hop Limit
setting for the new LSP path trying to be established whereas the
value of vRtrMplsLspPathOperFRHopLimit specifies the FR Hop Limit
setting for the existing LSP path."
::= { vRtrMplsLspPathOperEntry 14 }
vRtrMplsLspPathOperFRPropAdmGrp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperFRPropAdmGrp indicates whether the
currently operational LSP path has propagation of admin groups in the
FAST_REROUTE object enabled or disabled.
When make-before-break functionality for the LSP is enabled and if the
LSP FR propagate admin groups is changed, the resources allocated to
the existing LSP paths will not be released until a new path with the
new settings has been established. While a new path is being signaled,
the administrative value and the operational values of the path may
differ. The value of vRtrMplsLspFRPropAdminGroup specifies the FR
propagate admin group setting for the new LSP path trying to be
established whereas the value of vRtrMplsLspPathOperFRPropAdmGrp
specifies the FR propagate admin group setting for the existing LSP
path."
::= { vRtrMplsLspPathOperEntry 15 }
vRtrMplsLspPathOperInterArea OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperInterArea indicates whether the
operational LSP path is either inter-area or intra-area."
::= { vRtrMplsLspPathOperEntry 16 }
vRtrMplsLspPathOperCompMeth OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
none (1),
localCspf (2),
pce (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperCompMeth indicates the path
computation method that was used for the currently operational LSP
path.
A value of 'notApplicable' indicates that the LSP path is
operationally down or path list is SID."
::= { vRtrMplsLspPathOperEntry 17 }
vRtrMplsLspPathOperMetricType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
igp (1),
te (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperMetricType indicates the metric type
used for the currently operational LSP path.
A value of 'notApplicable' indicates that the LSP path is
operationally down."
::= { vRtrMplsLspPathOperEntry 18 }
vRtrMplsLspPathOperLocalSrProt OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
none (1),
preferred (2),
mandatory (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperLocalSrProt indicates the local SR
protection used for the currently operational LSP path.
A value of 'notApplicable' indicates that the LSP path is
operationally down."
::= { vRtrMplsLspPathOperEntry 19 }
vRtrMplsLspPathOperLabelStackRed OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
true (1),
false (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathOperLabelStackRed indicates whether label
stack reduction is used for the currently operational LSP path.
A value of 'notApplicable' indicates that the LSP path is
operationally down."
::= { vRtrMplsLspPathOperEntry 20 }
vRtrMplsLspPathNgFNAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vRtrMplsLspPathNgFNAddrType object is an enumerated value that
specifies the destination address type of the node in the LSP path at
which the LSP path failed."
::= { vRtrMplsLspPathOperEntry 21 }
vRtrMplsLspPathNgFNAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathNgFNAddr indicates the IP address of the
node in the LSP path at which the LSP path failed."
::= { vRtrMplsLspPathOperEntry 22 }
vRtrMplsLabelObjs OBJECT IDENTIFIER ::= { tmnxMplsObjs 45 }
vRtrMplsLabelMaxStaticLspLabels OBJECT-TYPE
SYNTAX Unsigned32 (0..262112)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLabelMaxStaticLspLabels specifies the maximum
number of Static LSP labels available on the system.
vRtrMplsLabelMaxStaticLspLabels must be set along with
vRtrMplsLabelMaxStaticSvcLabels. The total of both values should equal
the maximum value allowed of 131040 or 262112 depending on the system.
The maximum value of vRtrMplsLabelMaxStaticLspLabels value for most
systems is 113040 labels (128 * 1024 less 32 reserved labels).
The maximum value of vRtrMplsLabelMaxStaticLspLabels value for chassis
mode D systems is 262112 labels (256 * 1024 less 32 reserved labels).
vRtrMplsLabelMaxStaticLspLabels is obsoleted in 13.0, replaced by
vRtrMplsLabelStaticLabelRange."
DEFVAL { 2016 }
::= { vRtrMplsLabelObjs 1 }
vRtrMplsLabelMaxStaticSvcLabels OBJECT-TYPE
SYNTAX Unsigned32 (0..262112)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLabelMaxStaticSvcLabels specifies the maximum
number of Static SVC labels available on the system.
vRtrMplsLabelMaxStaticSvcLabels must be set along with
vRtrMplsLabelMaxStaticLspLabels. The total of both values should equal
the maximum value allowed of 113040 or 262112 depending on the system.
The maximum value of vRtrMplsLabelMaxStaticLspLabels value for most
systems is 113040 labels (128 * 1024 less 32 reserved labels).
The maximum value of vRtrMplsLabelMaxStaticLspLabels value for chassis
mode D systems is 262112 labels (256 * 1024 less 32 reserved labels).
vRtrMplsLabelMaxStaticSvcLabels is obsoleted in 13.0, replaced by
vRtrMplsLabelStaticLabelRange."
DEFVAL { 16384 }
::= { vRtrMplsLabelObjs 2 }
vRtrMplsLabelBgpLabelsHoldTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelBgpLabelsHoldTimer specifies the number of
seconds to wait before deleting a BGP label entry based on the
next-hop from IOM."
DEFVAL { 0 }
::= { vRtrMplsLabelObjs 3 }
vRtrMplsLabelSegRouteStartLabel OBJECT-TYPE
SYNTAX TmnxMplsLabelOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelSegRouteStartLabel specifies the start value
label available for Segment Routing on the system.
vRtrMplsLabelSegRouteStartLabel must be set along with
vRtrMplsLabelSegRouteEndLabel."
DEFVAL { 0 }
::= { vRtrMplsLabelObjs 4 }
vRtrMplsLabelSegRouteEndLabel OBJECT-TYPE
SYNTAX TmnxMplsLabelOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelSegRouteEndLabel specifies the end value
label available for Segment Routing on the system.
vRtrMplsLabelSegRouteStartLabel must be set along with
vRtrMplsLabelSegRouteEndLabel."
DEFVAL { 0 }
::= { vRtrMplsLabelObjs 5 }
vRtrMplsLabelStaticLabelRange OBJECT-TYPE
SYNTAX Unsigned32 (0..1048544)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLabelStaticLabelRange specifies the range of the
Static labels available on the system.
vRtrMplsLabelStaticLabelRange maximum value can be 524256 or 1048544
depending on the system profile value (tmnxChassisSystemProfile).
For a system configured with system profile as 'profileB', the maximum
value of vRtrMplsLabelStaticLabelRange is 1048544 labels (1024 * 1024
less 32 reserved labels).
Otherwise, the maximum value of vRtrMplsLabelStaticLabelRange
is 524256 labels (512 * 1024 less 32 reserved labels). "
DEFVAL { 18400 }
::= { vRtrMplsLabelObjs 6 }
vRtrMplsLspTempAutoBWTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWTblLastChg indicates the sysUpTime
at the time of the last modification to vRtrMplsLspTempAutoBWTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 46 }
vRtrMplsLspTempAutoBWTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTempAutoBWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTempAutoBWTable has an entry for auto bandwidth
configuration for each Labeled Switch Path (LSP) template configured
for a virtual router in the system."
::= { tmnxMplsObjs 47 }
vRtrMplsLspTempAutoBWEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTempAutoBWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents auto bandwidth configuration for a Labeled
Switch Path (LSP) Template configured for a virtual router in the
system."
INDEX {
vRtrID,
vRtrMplsLspTemplateName
}
::= { vRtrMplsLspTempAutoBWTable 1 }
VRtrMplsLspTempAutoBWEntry ::= SEQUENCE
{
vRtrMplsLspTempAutoBWLastChg TimeStamp,
vRtrMplsLspTempAutoBWAdjDNPer Unsigned32,
vRtrMplsLspTempAutoBWAdjDNMbps TmnxMplsLspBandwidth,
vRtrMplsLspTempAutoBWAdjUPPer Unsigned32,
vRtrMplsLspTempAutoBWAdjUPMbps TmnxMplsLspBandwidth,
vRtrMplsLspTempAutoBWMaxBW TmnxMplsLspBandwidth,
vRtrMplsLspTempAutoBWMinBW TmnxMplsLspBandwidth,
vRtrMplsLspTempAutoBWMntrBW TruthValue,
vRtrMplsLspTempAutoBWAdjMult Unsigned32,
vRtrMplsLspTempAutoBWOverFlow Unsigned32,
vRtrMplsLspTempAutoBWOvrFlwThr Unsigned32,
vRtrMplsLspTempAutoBWOvrFlwBW TmnxMplsLspBandwidth,
vRtrMplsLspTempAutoBWSampMult Unsigned32,
vRtrMplsLspTempAutoBWSampTime Unsigned32,
vRtrMplsLspTempAutoBWInherit Unsigned32,
vRtrMplsLspTempAutoBWBeWeight Unsigned32,
vRtrMplsLspTempAutoBWL2Weight Unsigned32,
vRtrMplsLspTempAutoBWAfWeight Unsigned32,
vRtrMplsLspTempAutoBWL1Weight Unsigned32,
vRtrMplsLspTempAutoBWH2Weight Unsigned32,
vRtrMplsLspTempAutoBWEfWeight Unsigned32,
vRtrMplsLspTempAutoBWH1Weight Unsigned32,
vRtrMplsLspTempAutoBWNcWeight Unsigned32,
vRtrMplsLspTempAutoBWUnderFlow Unsigned32,
vRtrMplsLspTempAutoBWUndFlwThr Unsigned32,
vRtrMplsLspTempAutoBWUndFlwBW TmnxMplsLspBandwidth
}
vRtrMplsLspTempAutoBWLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWLastChg indicates the sysUpTime when
this row was last modified."
::= { vRtrMplsLspTempAutoBWEntry 1 }
vRtrMplsLspTempAutoBWAdjDNPer OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWAdjDNPer specifies minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as a
percentage of the current bandwidth, for decreasing the bandwidth of
the LSP template. At the adjust interval expiry, if the measured
bandwidth falls below the current bandwidth by the value of
vRtrMplsLspTempAutoBWAdjDNPer it can cause a resignaling attempt for
the LSP template.
A value of zero for this object indicates that the threshold check is
always true for any measured bandwidth less than current bandwidth."
DEFVAL { 5 }
::= { vRtrMplsLspTempAutoBWEntry 2 }
vRtrMplsLspTempAutoBWAdjDNMbps OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWAdjDNMbps specifies the minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as an
absolute bandwidth (Mbps), for decreasing the bandwidth of the LSP
template."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 3 }
vRtrMplsLspTempAutoBWAdjUPPer OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as a
percentage of the current bandwidth, for increasing the bandwidth of
the LSP template. At the adjust interval expiry, if the measured
bandwidth exceeds the current bandwidth by the value of
vRtrMplsLspTempAutoBWAdjUPPer it can cause a resignaling attempt for
the LSP template.
When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that
this threshold check is always true for any measured bandwidth greater
than current bandwidth"
DEFVAL { 5 }
::= { vRtrMplsLspTempAutoBWEntry 4 }
vRtrMplsLspTempAutoBWAdjUPMbps OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWAdjUPMbps specifies the minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as an
absolute bandwidth (Mbps), for increasing the bandwidth of the LSP
template."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 5 }
vRtrMplsLspTempAutoBWMaxBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWMaxBW specifies the maximum that
auto-bandwidth allocation is allowed to request for a LSP template."
DEFVAL { 100000 }
::= { vRtrMplsLspTempAutoBWEntry 6 }
vRtrMplsLspTempAutoBWMinBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWMinBW specifies the minimum that
auto-bandwidth allocation is allowed to request for a LSP template."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 7 }
vRtrMplsLspTempAutoBWMntrBW OBJECT-TYPE
SYNTAX TruthValue
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWMntrBW specifies whether the
collection and display of auto-bandwidth measurements is enabled or
disabled for the LSP template.
When the value of vRtrMplsLspTempAutoBWMntrBW is 'true' the collection
and display of auto-bandwidth measurements is enabled and when the
value is 'false' it is disabled."
DEFVAL { false }
::= { vRtrMplsLspTempAutoBWEntry 8 }
vRtrMplsLspTempAutoBWAdjMult OBJECT-TYPE
SYNTAX Unsigned32 (1..16383)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWAdjMult specifies the number of
collection intervals in the adjust interval.
The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and
vRtrMplsLspAutoBWAdjCount."
DEFVAL { 288 }
::= { vRtrMplsLspTempAutoBWEntry 9 }
vRtrMplsLspTempAutoBWOverFlow OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWOverFlow specifies number of
overflow samples that triggers an overflow auto-bandwidth adjustment
attempt."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 10 }
vRtrMplsLspTempAutoBWOvrFlwThr OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWOvrFlwThr specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an overflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 11 }
vRtrMplsLspTempAutoBWOvrFlwBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWOvrFlwBW specifies the minimum
difference between the current bandwidth of the LSP template and the
sampled data rate, expressed as an absolute bandwidth (Mbps), for
counting an overflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 12 }
vRtrMplsLspTempAutoBWSampMult OBJECT-TYPE
SYNTAX Unsigned32 (1..511)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWSampMult specifies the multiplier
for collection intervals in a sample interval."
DEFVAL { 1 }
::= { vRtrMplsLspTempAutoBWEntry 13 }
vRtrMplsLspTempAutoBWSampTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWSampTime indicates the sample
multiplier times the collection interval."
::= { vRtrMplsLspTempAutoBWEntry 14 }
vRtrMplsLspTempAutoBWInherit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspTempAutoBWInherit that controls whether
to inherit the operational value of the object or use the
administratively set value.
This object is a bit-mask, with the following positions:
vRtrMplsLspTempAutoBWAdjMult 0x1
vRtrMplsLspTempAutoBWSampMult 0x2
When the bit for an object is set to one, then the object's
administrative and operational value are whatever the DEFVAL or most
recently SET value is.
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrMplsGeneralTable."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 15 }
vRtrMplsLspTempAutoBWBeWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWBeWeight specifies the weight in
percent for forwarding class 'BE' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 16 }
vRtrMplsLspTempAutoBWL2Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWL2Weight specifies the weight in
percent for forwarding class 'L2' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 17 }
vRtrMplsLspTempAutoBWAfWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWAfWeight specifies the weight in
percent for forwarding class 'AF' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 18 }
vRtrMplsLspTempAutoBWL1Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWL1Weight specifies the weight in
percent for forwarding class 'L1' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 19 }
vRtrMplsLspTempAutoBWH2Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWH2Weight specifies the weight in
percent for forwarding class 'H2' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 20 }
vRtrMplsLspTempAutoBWEfWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWEfWeight specifies the weight in
percent for forwarding class 'EF' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 21 }
vRtrMplsLspTempAutoBWH1Weight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWH1Weight specifies the weight in
percent for forwarding class 'H1' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 22 }
vRtrMplsLspTempAutoBWNcWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWNcWeight specifies the weight in
percent for forwarding class 'NC' for the LSP template."
DEFVAL { 100 }
::= { vRtrMplsLspTempAutoBWEntry 23 }
vRtrMplsLspTempAutoBWUnderFlow OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWUnderFlow specifies the number of
underflow samples that trigger an underflow auto-bandwidth adjustment
attempt."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 24 }
vRtrMplsLspTempAutoBWUndFlwThr OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWUndFlwThr specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an underflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 25 }
vRtrMplsLspTempAutoBWUndFlwBW OBJECT-TYPE
SYNTAX TmnxMplsLspBandwidth
UNITS "megabps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAutoBWUndFlwBW specifies the minimum
difference between the current bandwidth of the LSP template and the
sampled data rate, expressed as an absolute bandwidth (Mbps), for
counting an underflow sample."
DEFVAL { 0 }
::= { vRtrMplsLspTempAutoBWEntry 26 }
vRtrMplsTemplPlcyBindTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsTemplPlcyBindTblLastChg indicates the sysUpTime
at the time of the last modification to vRtrMplsLspTemplPlcyBindTable
by adding, deleting an entry or change to a writable object in the
table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxMplsObjs 48 }
vRtrMplsLspTemplPlcyBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTemplPlcyBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTemplPlcyBindTable has an entry for each policy bound
to each Labeled Switch Path (LSP) template configured for a virtual
router in the system."
::= { tmnxMplsObjs 49 }
vRtrMplsLspTemplPlcyBindEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTemplPlcyBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a policy bound to a Labeled Switch Path
(LSP) Template configured for a virtual router in the system."
INDEX {
vRtrID,
vRtrMplsLspTemplateName
}
::= { vRtrMplsLspTemplPlcyBindTable 1 }
VRtrMplsLspTemplPlcyBindEntry ::= SEQUENCE
{
vRtrMplsLspTemplPlcyBindLastChg TimeStamp,
vRtrMplsLspTemplPlcyBindRowStat RowStatus,
vRtrMplsLspTemplPlcyBind1 TPolicyStatementNameOrEmpty,
vRtrMplsLspTemplPlcyBind2 TPolicyStatementNameOrEmpty,
vRtrMplsLspTemplPlcyBind3 TPolicyStatementNameOrEmpty,
vRtrMplsLspTemplPlcyBind4 TPolicyStatementNameOrEmpty,
vRtrMplsLspTemplPlcyBind5 TPolicyStatementNameOrEmpty,
vRtrMplsLspTemplPlcyBindOneHop TruthValue
}
vRtrMplsLspTemplPlcyBindLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrMplsLspTemplPlcyBindLastChg indicates the
value of the sysUpTime when this entry was last modified."
::= { vRtrMplsLspTemplPlcyBindEntry 1 }
vRtrMplsLspTemplPlcyBindRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrMplsLspTemplPlcyBindRowStat specifies the
RowStatus for Policy bound entry."
::= { vRtrMplsLspTemplPlcyBindEntry 2 }
vRtrMplsLspTemplPlcyBind1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplPlcyBind1 specifies the name of the first
mpls lsp template policy.
This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true."
DEFVAL { ''H }
::= { vRtrMplsLspTemplPlcyBindEntry 3 }
vRtrMplsLspTemplPlcyBind2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplPlcyBind2 specifies the name of the
second mpls lsp template policy.
This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true."
DEFVAL { ''H }
::= { vRtrMplsLspTemplPlcyBindEntry 4 }
vRtrMplsLspTemplPlcyBind3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplPlcyBind3 specifies the name of the third
mpls lsp template policy.
This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true."
DEFVAL { ''H }
::= { vRtrMplsLspTemplPlcyBindEntry 5 }
vRtrMplsLspTemplPlcyBind4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplPlcyBind4 specifies the name of the
fourth mpls lsp template policy.
This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true."
DEFVAL { ''H }
::= { vRtrMplsLspTemplPlcyBindEntry 6 }
vRtrMplsLspTemplPlcyBind5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplPlcyBind5 specifies the name of the fifth
mpls lsp template policy.
This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true."
DEFVAL { ''H }
::= { vRtrMplsLspTemplPlcyBindEntry 7 }
vRtrMplsLspTemplPlcyBindOneHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTemplPlcyBindOneHop specifies whether the
one-hop-p2p has been enabled for auto-lsp or not.
This object will be set to false when any one of the policy for mpls
lsp template is set to its non-default value."
DEFVAL { false }
::= { vRtrMplsLspTemplPlcyBindEntry 8 }
vRtrMplsLspTempInStatTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last change to the vRtrMplsLspTempInStatTblLstChg
either from adding a row or removing a row."
::= { tmnxMplsObjs 50 }
vRtrMplsLspTempInStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTempInStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrMplsLspTempInStatTable controls Ingress Statistics for Template
based Label Switched Path (LSP)."
::= { tmnxMplsObjs 51 }
vRtrMplsLspTempInStatEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTempInStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information about the ingress
statistics collection for Template based LSP."
INDEX {
vRtrID,
vRtrMplsLspTempInStatType,
vRtrMplsLspTempInStatSndrAddrTyp,
vRtrMplsLspTempInStatSndrAddr,
vRtrMplsLspTempInStatLspNamePref
}
::= { vRtrMplsLspTempInStatTable 1 }
VRtrMplsLspTempInStatEntry ::= SEQUENCE
{
vRtrMplsLspTempInStatType INTEGER,
vRtrMplsLspTempInStatSndrAddrTyp InetAddressType,
vRtrMplsLspTempInStatSndrAddr InetAddress,
vRtrMplsLspTempInStatLspNamePref TLNamedItem,
vRtrMplsLspTempInStatRowStatus RowStatus,
vRtrMplsLspTempInStatLastChanged TimeStamp,
vRtrMplsLspTempInStatCollectStat TruthValue,
vRtrMplsLspTempInStatAccntPolicy Unsigned32,
vRtrMplsLspTempInStatAdminState TmnxAdminState,
vRtrMplsLspTempInStatMaxStats Unsigned32,
vRtrMplsLspTempInStatTotlSession Unsigned32,
vRtrMplsLspTempInStatsMode INTEGER
}
vRtrMplsLspTempInStatType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
p2p (1),
p2mp (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatType indicates the type of template
based Label Switched Path (LSP)."
::= { vRtrMplsLspTempInStatEntry 1 }
vRtrMplsLspTempInStatSndrAddrTyp OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatSndrAddrTyp indicates address type
of vRtrMplsLspTempInStatSndrAddr."
::= { vRtrMplsLspTempInStatEntry 2 }
vRtrMplsLspTempInStatSndrAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatSndrAddr indicates the sender
address."
::= { vRtrMplsLspTempInStatEntry 3 }
vRtrMplsLspTempInStatLspNamePref OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatLspNamePref indicates the prefix
against which to match the LSP name."
::= { vRtrMplsLspTempInStatEntry 4 }
vRtrMplsLspTempInStatRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrMplsLspTempInStatRowStatus is used for the creation or deletion of
entries in the vRtrMplsLspTempInStatTable."
::= { vRtrMplsLspTempInStatEntry 5 }
vRtrMplsLspTempInStatLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatLastChanged indicates the time stamp
of the last change to this row of this table."
::= { vRtrMplsLspTempInStatEntry 6 }
vRtrMplsLspTempInStatCollectStat OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatCollectStat specifies whether to
collect statistics for this prefix."
DEFVAL { false }
::= { vRtrMplsLspTempInStatEntry 7 }
vRtrMplsLspTempInStatAccntPolicy OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatAccntPolicy specifies the accounting
policy to be used for this entry.
A value of zero indicates that the default accounting policy should be
used."
DEFVAL { 0 }
::= { vRtrMplsLspTempInStatEntry 8 }
vRtrMplsLspTempInStatAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatAdminState specifies whether ingress
statistics is enabled for this Label Switched Path (LSP) template."
DEFVAL { outOfService }
::= { vRtrMplsLspTempInStatEntry 9 }
vRtrMplsLspTempInStatMaxStats OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatMaxStats specifies the maximum
number of stat indices assigned to this Label Switched Path (LSP)
template session."
DEFVAL { 8191 }
::= { vRtrMplsLspTempInStatEntry 10 }
vRtrMplsLspTempInStatTotlSession OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatTotlSession indicates the total
number of sessions associated with this Label Switched Path (LSP)
template statistics."
::= { vRtrMplsLspTempInStatEntry 11 }
vRtrMplsLspTempInStatsMode OBJECT-TYPE
SYNTAX INTEGER {
per-fc (0),
aggregate (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempInStatsMode specifies whether statistics
are per-fc or aggregate.
If the value of vRtrMplsLspTempInStatsMode is 'per-fc' means collected
stats will be per forwarding class.
If the value of vRtrMplsLspTempInStatsMode is 'aggregate' means
collected stats will be aggregated."
DEFVAL { per-fc }
::= { vRtrMplsLspTempInStatEntry 12 }
vRtrMplsLspExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP)
configured for a virtual router in the system. This table augments the
vRtrMplsLspTable."
::= { tmnxMplsObjs 52 }
vRtrMplsLspExtEntry OBJECT-TYPE
SYNTAX VRtrMplsLspExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Each row entry represents a Labeled
Switch Path (LSP) configured for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations using the
vRtrMplsLspRowStatus variable."
AUGMENTS { vRtrMplsLspEntry }
::= { vRtrMplsLspExtTable 1 }
VRtrMplsLspExtEntry ::= SEQUENCE
{
vRtrMplsLspExtPceCompute TruthValue,
vRtrMplsLspExtPceControl TruthValue,
vRtrMplsLspExtPceReport INTEGER,
vRtrMplsLspExtTtmTunnelId Unsigned32,
vRtrMplsLspExtMaxSrLabels Unsigned32,
vRtrMplsLspExtTunnelId Unsigned32,
vRtrMplsLspExtEntropyLabel INTEGER,
vRtrMplsLspExtOperEntropyLabel INTEGER,
vRtrMplsLspExtFrrOverheadLabel Unsigned32,
vRtrMplsLspExtNegEntropyLbl INTEGER,
vRtrMplsLspExtBfdFailureAction INTEGER,
vRtrMplsLspExtCbfFwdingPlcy TNamedItemOrEmpty,
vRtrMplsLspExtCbfFwdingSet Unsigned32,
vRtrMplsLspExtPathCompMeth INTEGER,
vRtrMplsLspExtMetricType INTEGER,
vRtrMplsLspExtLocalSrProt INTEGER,
vRtrMplsLspExtLabelStackRed TruthValue,
vRtrMplsLspExtBfdUpWaitTimer Unsigned32,
vRtrMplsLspExtSelfPing INTEGER,
vRtrMplsLspExtFallbkPathComp INTEGER,
vRtrMplsLspExtTriggerManualSw INTEGER,
vRtrMplsLspExtActivePathIndex MplsTunnelIndex,
vRtrMplsLspExtOverrideTunElc TruthValue,
vRtrMplsLspExtPrefTransFrr TruthValue,
vRtrMplsLspExtBfdReturnPathLabel Unsigned32,
vRtrMplsLspExtSoftPreemption TruthValue
}
vRtrMplsLspExtPceCompute OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of vRtrMplsLspExtPceCompute specifies whether the LSP path
computation request is sent to local CSPF or to PCE. When the value of
this object is 'true', the LSP makes a request to PCE to compute the
path. When the value of this object is 'false', the path for this LSP
is computed locally using CSPF."
DEFVAL { false }
::= { vRtrMplsLspExtEntry 1 }
vRtrMplsLspExtPceControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtPceControl specifies whether the control of
the LSP path will be delegated to Path Computation Engine (PCE). Path
delegation can be done on computed paths and paths computed using PCE."
DEFVAL { false }
::= { vRtrMplsLspExtEntry 2 }
vRtrMplsLspExtPceReport OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
inherit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtPceReport specifies whether to override the
global configuration of reporting of LSP to PCE.
If the value of vRtrMplsLspExtPceReport is 'disabled' for an LSP
either due to inheritance or due to LSP level configuration, the value
of vRtrMplsLspExtPceControl has no affect.
The default value for vRtrMplsLspExtPceReport is 'inherit'."
DEFVAL { inherit }
::= { vRtrMplsLspExtEntry 3 }
vRtrMplsLspExtTtmTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtTtmTunnelId indicates the tunnel id sent to
TTM for Segment Routing Tunnels on this SROS system."
::= { vRtrMplsLspExtEntry 4 }
vRtrMplsLspExtMaxSrLabels OBJECT-TYPE
SYNTAX Unsigned32 (1..11)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtMaxSrLabels specifies maximum segment
routing label stack size for this LSP.
The default IXR platform is 3 and maximum value supported is 5."
DEFVAL { 6 }
::= { vRtrMplsLspExtEntry 5 }
vRtrMplsLspExtTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtTunnelId indicates the tunnel id used to
uniquely identify tunnels on this SROS system."
::= { vRtrMplsLspExtEntry 6 }
vRtrMplsLspExtEntropyLabel OBJECT-TYPE
SYNTAX INTEGER {
forceDisable (1),
enable (2),
inherit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtEntropyLabel specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for this LSP.
When the value of vRtrMplsLspExtEntropyLabel is set to 'enable', the
application will account for EL/ELC in the label stack without taking
into consideration the value of the enabled ELC.
When the value of vRtrMplsLspExtEntropyLabel is set to
'force-disable', the application will ignore the value of enabled ELC.
When the value of vRtrMplsLspExtEntropyLabel is modified, Entropy
Label will become operational when this LSP is resignalled.
By default, if this LSP is of type RSVP-TE it will inherit the
behavior as set by vRtrMplsGeneralEntropyLblRsvpTe, or if the LSP is
of type SR-TE it will inherit from vRtrMplsGeneralEntropyLblSrTe."
DEFVAL { inherit }
::= { vRtrMplsLspExtEntry 7 }
vRtrMplsLspExtOperEntropyLabel OBJECT-TYPE
SYNTAX INTEGER {
forceDisable (1),
enable (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtOperEntropyLabel indicates the operational
value of Entropy Label for this LSP.
When the value of vRtrMplsLspExtOperEntropyLabel is modified, Entropy
Label will become operational when this LSP is resignalled.
By default, this LSP will have Entropy Label set to 'force-disable'."
::= { vRtrMplsLspExtEntry 8 }
vRtrMplsLspExtFrrOverheadLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtFrrOverheadLabel specifies maximum
additional overhead labels for this LSP."
DEFVAL { 1 }
::= { vRtrMplsLspExtEntry 9 }
vRtrMplsLspExtNegEntropyLbl OBJECT-TYPE
SYNTAX INTEGER {
forceDisable (1),
enable (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtNegEntropyLbl indicates the combination of
Entropy Label configured at head end for this LSP and the Entropy
Label Capability signalled from the far end."
::= { vRtrMplsLspExtEntry 10 }
vRtrMplsLspExtBfdFailureAction OBJECT-TYPE
SYNTAX INTEGER {
none (0),
down (1),
failover (2),
failoverOrDown (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtBfdFailureAction specifies the actions to
be taken when this LSP BFD session fails.
When vRtrMplsLspExtBfdFailureAction is set to down, it prevents the
LSP from being made available as a transport for any user.
When vRtrMplsLspExtBfdFailureAction is set to failover, the Lsp is
always marked as usable, regardless of the BFD session state.
When vRtrMplsLspExtBfdFailureAction is set to failoverOrDown and the
BFD session associated with the active-path of the LSP goes down, the
LSP will switch to the standby-path if applicable. When the LSP
cannot switchover, the LSP will go operationally down."
DEFVAL { none }
::= { vRtrMplsLspExtEntry 11 }
vRtrMplsLspExtCbfFwdingPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtCbfFwdingPlcy specifies the name of the
Class Forwarding Policy for this LSP instance."
DEFVAL { "" }
::= { vRtrMplsLspExtEntry 12 }
vRtrMplsLspExtCbfFwdingSet OBJECT-TYPE
SYNTAX Unsigned32 (0..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtCbfFwdingSet specifies the Class Forwarding
Set ID for this LSP instance. If system profile is profile-b then
valid range is 0..6 else 0..4"
DEFVAL { 0 }
::= { vRtrMplsLspExtEntry 13 }
vRtrMplsLspExtPathCompMeth OBJECT-TYPE
SYNTAX INTEGER {
none (1),
localCspf (2),
pce (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtPathCompMeth specifies LSP path
computation method.
If the value of vRtrMplsLspExtPathCompMeth is 'localCspf' for an LSP
the path uses local CSPF.
If the value of vRtrMplsLspExtPathCompMeth is 'pce' for an LSP the
path uses PCE;
The default value for vRtrMplsLspExtPathCompMeth is 'none'."
DEFVAL { none }
::= { vRtrMplsLspExtEntry 14 }
vRtrMplsLspExtMetricType OBJECT-TYPE
SYNTAX INTEGER {
igp (1),
te (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtMetricType specifies metric type.
If the value of vRtrMplsLspExtMetricType is 'igp', the metric used is
IGP.
If the value of vRtrMplsLspExtMetricType is 'te', the metric used is
TE.
The default value for vRtrMplsLspExtPceReport is 'igp'."
DEFVAL { igp }
::= { vRtrMplsLspExtEntry 15 }
vRtrMplsLspExtLocalSrProt OBJECT-TYPE
SYNTAX INTEGER {
none (1),
preferred (2),
mandatory (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtLocalSrProt specifies the local SR
protection.
If the value of vRtrMplsLspExtLocalSrProt is 'none', there is no
protection.
If the value of vRtrMplsLspExtLocalSrProt is 'preferred', the
protection is preferred.
If the value of vRtrMplsLspExtLocalSrProt is 'mandatory', the
protection is mandatory.
The default value for vRtrMplsLspExtLocalSrProt is 'none'."
DEFVAL { preferred }
::= { vRtrMplsLspExtEntry 16 }
vRtrMplsLspExtLabelStackRed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtLabelStackRed specifies whether label stack
reduction is enabled."
DEFVAL { false }
::= { vRtrMplsLspExtEntry 17 }
vRtrMplsLspExtBfdUpWaitTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtBfdUpWaitTimer specifies the time in
seconds the software will wait for BFD to come up.
The timer object is applicable only when
vRtrMplsLspExtBfdFailureAction is set to 'failoverOrDown'.
The timer object is applicable for LSPs with vRtrMplsLspType set to
'srTe' or 'dynamic'.
The timer is started when BFD is first enabled on a path or BFD
transitions from up to down. When this timer expires and if BFD has
not yet come up, the path is torn down by removing it from TTM and
the IOM and the retry timer is started."
DEFVAL { 4 }
::= { vRtrMplsLspExtEntry 18 }
vRtrMplsLspExtSelfPing OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
inherit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtSelfPing specifies whether to override the
global configuration of Self Ping.
If the value of vRtrMplsLspExtSelfPing is 'disabled' for an LSP either
due to inheritance or due to LSP level configuration, the value of
vRtrMplsLspExtSelfPing has no affect.
The default value for vRtrMplsLspExtSelfPing is 'inherit'."
DEFVAL { inherit }
::= { vRtrMplsLspExtEntry 19 }
vRtrMplsLspExtFallbkPathComp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
none (1),
localCspf (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtFallbkPathComp specifies fallback path
computation method used for the LSP.
If the value of vRtrMplsLspExtFallbkPathComp is 'localCspf' the
fallback path computation method used for the LSP is local CSPF.
If the value of vRtrMplsLspExtFallbkPathComp is 'notApplicable'
fallback the path computation method is not applicable to the LSP.
The default value for vRtrMplsLspExtFallbkPathComp is 'none'."
DEFVAL { notApplicable }
::= { vRtrMplsLspExtEntry 20 }
vRtrMplsLspExtTriggerManualSw OBJECT-TYPE
SYNTAX INTEGER {
noAction (0),
switchAway (1),
switchBack (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtTriggerManualSw specifies manual switching
from current active LSP path to a new path which could be
primary/standby/secondary path.
If the value of vRtrMplsLspExtTriggerManualSw is 'switchAway' then
current active path is degraded and another path is brought up as an
active path.
If the value of vRtrMplsLspExtTriggerManualSw is 'switchBack' then
clear the degrade state of path and switch to best path.
The default value for vRtrMplsLspExtTriggerManualSw is 'noAction'."
DEFVAL { noAction }
::= { vRtrMplsLspExtEntry 21 }
vRtrMplsLspExtActivePathIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtActivePathIndex indicates the
MplsTunnelIndex of the active path of this LSP. A value of 0 indicates
that the LSP has no active path."
::= { vRtrMplsLspExtEntry 22 }
vRtrMplsLspExtOverrideTunElc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtOverrideTunElc specifies whether to
override the entropy label capability (ELC) for SR-TE LSPs for which
the path has been computed by PCE or for SR-TE LSPs that are using
paths consisting of static SID labels."
DEFVAL { false }
::= { vRtrMplsLspExtEntry 23 }
vRtrMplsLspExtPrefTransFrr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtPrefTransFrr specifies whether to defer
hardware fast-reroute protection to the SR tunnel for SR-TE LSPs."
DEFVAL { false }
::= { vRtrMplsLspExtEntry 24 }
vRtrMplsLspExtBfdReturnPathLabel OBJECT-TYPE
SYNTAX Unsigned32 (32..1048512 | 4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtBfdReturnPathLabel indicates the return
path label for the LSP."
DEFVAL { 4294967295 }
::= { vRtrMplsLspExtEntry 25 }
vRtrMplsLspExtSoftPreemption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspExtSoftPreemption specifies whether soft
preemption is enabled or disabled for P2MP RSVP LSPs."
DEFVAL { false }
::= { vRtrMplsLspExtEntry 26 }
vRtrMplsLspPathProfTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last change to the vRtrMplsLspPathProfTblLstChg
either from adding a row or removing a row."
::= { tmnxMplsObjs 53 }
vRtrMplsLspPathProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspPathProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspPathProfTable has an entry for each Labeled Switch Path
(LSP) configured for a virtual router in the system."
::= { tmnxMplsObjs 54 }
vRtrMplsLspPathProfEntry OBJECT-TYPE
SYNTAX VRtrMplsLspPathProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspPathProfId to have been assigned a valid value."
INDEX {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspPathProfId
}
::= { vRtrMplsLspPathProfTable 1 }
VRtrMplsLspPathProfEntry ::= SEQUENCE
{
vRtrMplsLspPathProfId Unsigned32,
vRtrMplsLspPathProfRowStatus RowStatus,
vRtrMplsLspPathProfLastChange TimeStamp,
vRtrMplsLspPathProfGroupId Unsigned32
}
vRtrMplsLspPathProfId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathProfId specifies the profile id of for the
specified LSP."
DEFVAL { 0 }
::= { vRtrMplsLspPathProfEntry 1 }
vRtrMplsLspPathProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control
of vRtrMplsLspPathProfTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a valid value."
::= { vRtrMplsLspPathProfEntry 2 }
vRtrMplsLspPathProfLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsLspPathProfEntry 3 }
vRtrMplsLspPathProfGroupId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathProfGroupId specifies the group id used by
the path profile for the specified LSP."
DEFVAL { 0 }
::= { vRtrMplsLspPathProfEntry 4 }
vRtrMplsClassFwdPlcyTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyTblLstChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsClassFwdPlcyTable."
::= { tmnxMplsObjs 55 }
vRtrMplsClassFwdPlcyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsClassFwdPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsClassFwdPlcyTable has an entry for each Forwarding Class
Policy configured for a virtual router in the system."
::= { tmnxMplsObjs 56 }
vRtrMplsClassFwdPlcyEntry OBJECT-TYPE
SYNTAX VRtrMplsClassFwdPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of a Forwarding Class Policy
in the MPLS protocol for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsClassFwdPlcyName
}
::= { vRtrMplsClassFwdPlcyTable 1 }
VRtrMplsClassFwdPlcyEntry ::= SEQUENCE
{
vRtrMplsClassFwdPlcyName TNamedItem,
vRtrMplsClassFwdPlcyRowStatus RowStatus,
vRtrMplsClassFwdPlcyLastChanged TimeStamp,
vRtrMplsClassFwdPlcyDefSetId Unsigned32,
vRtrMplsClassFwdPlcyRefCount Gauge32
}
vRtrMplsClassFwdPlcyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyName specifies the name for the class
forwarding policy."
::= { vRtrMplsClassFwdPlcyEntry 1 }
vRtrMplsClassFwdPlcyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyRowStatus controls the creation and
deletion of rows in the table."
::= { vRtrMplsClassFwdPlcyEntry 2 }
vRtrMplsClassFwdPlcyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsClassFwdPlcyEntry 3 }
vRtrMplsClassFwdPlcyDefSetId OBJECT-TYPE
SYNTAX Unsigned32 (1..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyDefSetId specifies default forwarding
set ID when no forwarding class is specified for Lsp or Lsp Template
instance. If system profile is profile-b then valid range is 1..6 else
1..4"
DEFVAL { 1 }
::= { vRtrMplsClassFwdPlcyEntry 4 }
vRtrMplsClassFwdPlcyRefCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyRefCount indicates the number of LSPs
or LSP templates that are referencing this class forwarding policy."
::= { vRtrMplsClassFwdPlcyEntry 5 }
vRtrMplsClassFwdPlcyFCTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyFCTblLstChg indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrMplsClassFwdPlcyFCTable."
::= { tmnxMplsObjs 57 }
vRtrMplsClassFwdPlcyFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsClassFwdPlcyFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsClassFwdPlcyFCTable has an entry for each type of
Forwarding Class and its corresponding forwarding set id."
::= { tmnxMplsObjs 58 }
vRtrMplsClassFwdPlcyFCEntry OBJECT-TYPE
SYNTAX VRtrMplsClassFwdPlcyFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of a Forwarding Class and
forwarding set id in the MPLS protocol for a virtual router in the
system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsClassFwdPlcyName,
vRtrMplsClassFwdPlcyFC
}
::= { vRtrMplsClassFwdPlcyFCTable 1 }
VRtrMplsClassFwdPlcyFCEntry ::= SEQUENCE
{
vRtrMplsClassFwdPlcyFC TFCType,
vRtrMplsClassFwdPlcyFCSetId Unsigned32
}
vRtrMplsClassFwdPlcyFC OBJECT-TYPE
SYNTAX TFCType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyFC specifies the name of the
forwarding class assigned to the policy name specified by
vRtrMplsClassFwdPlcyName."
::= { vRtrMplsClassFwdPlcyFCEntry 1 }
vRtrMplsClassFwdPlcyFCSetId OBJECT-TYPE
SYNTAX Unsigned32 (1..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsClassFwdPlcyFCSetId specifies the forwarding set
ID to which forwarding class specified by vRtrMplsClassFwdPlcyFC is
mapped to. If system profile is profile-b then valid range is 1..6
else 1..4"
DEFVAL { 1 }
::= { vRtrMplsClassFwdPlcyFCEntry 2 }
vRtrMplsReservedLblBlkTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsReservedLblBlkTblLastChg indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrMplsReservedLblBlkTable."
::= { tmnxMplsObjs 59 }
vRtrMplsReservedLblBlkTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsReservedLblBlkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsReservedLblBlkTable has an entry for each reserved label
block."
::= { tmnxMplsObjs 60 }
vRtrMplsReservedLblBlkEntry OBJECT-TYPE
SYNTAX VRtrMplsReservedLblBlkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of a reserved label block in
the MPLS protocol for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX { vRtrMplsReservedLblBlkName }
::= { vRtrMplsReservedLblBlkTable 1 }
VRtrMplsReservedLblBlkEntry ::= SEQUENCE
{
vRtrMplsReservedLblBlkName TLNamedItem,
vRtrMplsReservedLblBlkRowStatus RowStatus,
vRtrMplsReservedLblBlkLastChg TimeStamp,
vRtrMplsReservedLblBlkStartLbl TmnxMplsLabelOrZero,
vRtrMplsReservedLblBlkEndLbl TmnxMplsLabelOrZero
}
vRtrMplsReservedLblBlkName OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsReservedLblBlkName specifies the name identifying
the reserved label block."
::= { vRtrMplsReservedLblBlkEntry 1 }
vRtrMplsReservedLblBlkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control of
vRtrMplsReservedLblBlkTable entries."
::= { vRtrMplsReservedLblBlkEntry 2 }
vRtrMplsReservedLblBlkLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsReservedLblBlkLastChg indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsReservedLblBlkEntry 3 }
vRtrMplsReservedLblBlkStartLbl OBJECT-TYPE
SYNTAX TmnxMplsLabelOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsReservedLblBlkStartLbl specifies the start value
of the reserved label available on the system.
vRtrMplsReservedLblBlkStartLbl must be set along with
vRtrMplsReservedLblBlkEndLbl."
::= { vRtrMplsReservedLblBlkEntry 4 }
vRtrMplsReservedLblBlkEndLbl OBJECT-TYPE
SYNTAX TmnxMplsLabelOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsReservedLblBlkEndLbl specifies the end value of
the reserved label available on the system.
vRtrMplsReservedLblBlkEndLbl must be set along with
vRtrMplsReservedLblBlkStartLbl."
::= { vRtrMplsReservedLblBlkEntry 5 }
vRtrMplsLspAdminTagTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAdminTagTblLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsLspAdminTagTable."
::= { tmnxMplsObjs 61 }
vRtrMplsLspAdminTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspAdminTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspAdminTagTable has an entry for each admin-tag
configured in the system."
::= { tmnxMplsObjs 62 }
vRtrMplsLspAdminTagEntry OBJECT-TYPE
SYNTAX VRtrMplsLspAdminTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of an admin-tag name in LSP
for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspAdminTagName
}
::= { vRtrMplsLspAdminTagTable 1 }
VRtrMplsLspAdminTagEntry ::= SEQUENCE
{
vRtrMplsLspAdminTagName TNamedItem,
vRtrMplsLspAdminTagRowStatus RowStatus,
vRtrMplsLspAdminTagLastChanged TimeStamp
}
vRtrMplsLspAdminTagName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAdminTagName specifies the name of the admin
tag."
::= { vRtrMplsLspAdminTagEntry 1 }
vRtrMplsLspAdminTagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control of
vRtrMplsLspAdminTagTable entries."
::= { vRtrMplsLspAdminTagEntry 2 }
vRtrMplsLspAdminTagLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspAdminTagLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsLspAdminTagEntry 3 }
vRtrMplsLspTempAdminTagTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAdminTagTblLstChg indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrMplsLspTempAdminTagTable."
::= { tmnxMplsObjs 63 }
vRtrMplsLspTempAdminTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTempAdminTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTempAdminTagTable has an entry for each admin-tag
configured in the system."
::= { tmnxMplsObjs 64 }
vRtrMplsLspTempAdminTagEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTempAdminTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of an admin-tag name in LSP
for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsLspTemplateName,
vRtrMplsLspTempAdminTagName
}
::= { vRtrMplsLspTempAdminTagTable 1 }
VRtrMplsLspTempAdminTagEntry ::= SEQUENCE
{
vRtrMplsLspTempAdminTagName TNamedItem,
vRtrMplsLspTempAdminTagRowStatus RowStatus,
vRtrMplsLspTempAdminTagLastChg TimeStamp
}
vRtrMplsLspTempAdminTagName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAdminTagName specifies the name of the
admin tag."
::= { vRtrMplsLspTempAdminTagEntry 1 }
vRtrMplsLspTempAdminTagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control of
vRtrMplsLspTempAdminTagTable entries."
::= { vRtrMplsLspTempAdminTagEntry 2 }
vRtrMplsLspTempAdminTagLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempAdminTagLastChg indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsLspTempAdminTagEntry 3 }
vRtrMplsFwdPlcyTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyTblLastChg indicates the sysUpTime at the
time of the last modification of an entry in the vRtrMplsFwdPlcyTable."
::= { tmnxMplsObjs 65 }
vRtrMplsFwdPlcyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFwdPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsFwdPlcyTable has an entry for each Forwarding Policy
configured for a virtual router in the system."
::= { tmnxMplsObjs 66 }
vRtrMplsFwdPlcyEntry OBJECT-TYPE
SYNTAX VRtrMplsFwdPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of a Forwarding Policy in
the MPLS protocol for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsFwdPlcyName
}
::= { vRtrMplsFwdPlcyTable 1 }
VRtrMplsFwdPlcyEntry ::= SEQUENCE
{
vRtrMplsFwdPlcyName TLNamedItem,
vRtrMplsFwdPlcyRowStatus RowStatus,
vRtrMplsFwdPlcyLastChanged TimeStamp,
vRtrMplsFwdPlcyAdminState TmnxAdminState,
vRtrMplsFwdPlcyOperState TmnxOperState,
vRtrMplsFwdPlcyBindingLabel TmnxMplsLabelOrZero,
vRtrMplsFwdPlcyEndpointAddrType InetAddressType,
vRtrMplsFwdPlcyEndpointAddr InetAddress,
vRtrMplsFwdPlcyRevertTimer Unsigned32,
vRtrMplsFwdPlcyPreference Unsigned32,
vRtrMplsFwdPlcyMetric Unsigned32,
vRtrMplsFwdPlcyTtmPreference Unsigned32
}
vRtrMplsFwdPlcyName OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the vRtrMplsFwdPlcyName specifies the name for the
forwarding policy."
::= { vRtrMplsFwdPlcyEntry 1 }
vRtrMplsFwdPlcyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyRowStatus controls the creation and
deletion of rows in the table."
::= { vRtrMplsFwdPlcyEntry 2 }
vRtrMplsFwdPlcyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyLastChanged indicates the sysUpTime when
this row was last modified."
::= { vRtrMplsFwdPlcyEntry 3 }
vRtrMplsFwdPlcyAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyAdminState specifies the current
administrative state of the forwarding policy."
DEFVAL { outOfService }
::= { vRtrMplsFwdPlcyEntry 4 }
vRtrMplsFwdPlcyOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyOperState indicates the current
operational state of the forwarding policy."
::= { vRtrMplsFwdPlcyEntry 5 }
vRtrMplsFwdPlcyBindingLabel OBJECT-TYPE
SYNTAX TmnxMplsLabelOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyBindingLabel specifies the binding label
for the forwarding policy."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyEntry 6 }
vRtrMplsFwdPlcyEndpointAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyEndpointAddrType specifies the type of
vRtrMplsFwdPlcyEndpointAddr."
DEFVAL { unknown }
::= { vRtrMplsFwdPlcyEntry 7 }
vRtrMplsFwdPlcyEndpointAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyEndpointAddr specifies the endpoint
address for the forwarding policy."
DEFVAL { ''H }
::= { vRtrMplsFwdPlcyEntry 8 }
vRtrMplsFwdPlcyRevertTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyRevertTimer specifies the revert timer for
the forwarding policy."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyEntry 9 }
vRtrMplsFwdPlcyPreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyPreference specifies the forwarding policy
preference number."
DEFVAL { 255 }
::= { vRtrMplsFwdPlcyEntry 10 }
vRtrMplsFwdPlcyMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of vRtrMplsFwdPlcyMetric specifies the metric of this
tunnel in the tunnel table."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyEntry 11 }
vRtrMplsFwdPlcyTtmPreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of vRtrMplsFwdPlcyTtmPreference specifies the preference of
this tunnel in the tunnel table."
DEFVAL { 255 }
::= { vRtrMplsFwdPlcyEntry 12 }
vRtrMplsFwdPlcyNHGrpTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpTblLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsFwdPlcyNHGrpTable."
::= { tmnxMplsObjs 67 }
vRtrMplsFwdPlcyNHGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFwdPlcyNHGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsFwdPlcyNHGrpTable has an entry for each Forwarding Policy
next-hop group configured for a virtual router in the system."
::= { tmnxMplsObjs 68 }
vRtrMplsFwdPlcyNHGrpEntry OBJECT-TYPE
SYNTAX VRtrMplsFwdPlcyNHGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of a Forwarding Policy
next-hop group in the MPLS protocol for a virtual router in the
system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsFwdPlcyName,
vRtrMplsFwdPlcyNHGrpIdx
}
::= { vRtrMplsFwdPlcyNHGrpTable 1 }
VRtrMplsFwdPlcyNHGrpEntry ::= SEQUENCE
{
vRtrMplsFwdPlcyNHGrpIdx Unsigned32,
vRtrMplsFwdPlcyNHGrpRowStatus RowStatus,
vRtrMplsFwdPlcyNHGrpLastChanged TimeStamp,
vRtrMplsFwdPlcyNHGrpAdminState TmnxAdminState,
vRtrMplsFwdPlcyNHGrpOperState TmnxOperState,
vRtrMplsFwdPlcyNHGrpResType INTEGER,
vRtrMplsFwdPlcyNHGrpLoadBalWt Unsigned32
}
vRtrMplsFwdPlcyNHGrpIdx OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the vRtrMplsFwdPlcyNHGrpIdx specifies the index for the
next-hop group."
::= { vRtrMplsFwdPlcyNHGrpEntry 1 }
vRtrMplsFwdPlcyNHGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpRowStatus controls the creation and
deletion of rows in the table."
::= { vRtrMplsFwdPlcyNHGrpEntry 2 }
vRtrMplsFwdPlcyNHGrpLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsFwdPlcyNHGrpEntry 3 }
vRtrMplsFwdPlcyNHGrpAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpAdminState specifies the current
administrative state of the next-hop group."
DEFVAL { outOfService }
::= { vRtrMplsFwdPlcyNHGrpEntry 4 }
vRtrMplsFwdPlcyNHGrpOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpOperState indicates the current
operational state of the next-hop group."
::= { vRtrMplsFwdPlcyNHGrpEntry 5 }
vRtrMplsFwdPlcyNHGrpResType OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
indirect (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpResType specifies the resolution
type of the next-hop group.
When the value of vRtrMplsFwdPlcyNHGrpResType is set to 'direct', the
next-hops in this group must resolve to direct routes for for them to
be operational.
When the value of vRtrMplsFwdPlcyNHGrpResType is set to 'indirect',
the next-hops in this group must resolve to indirect routes for for
them to be operational."
::= { vRtrMplsFwdPlcyNHGrpEntry 6 }
vRtrMplsFwdPlcyNHGrpLoadBalWt OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNHGrpLoadBalWt specifies the load
balancing weight for this next-hop group."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNHGrpEntry 7 }
vRtrMplsFwdPlcyNhgNHTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHTblLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsFwdPlcyNhgNHTable."
::= { tmnxMplsObjs 69 }
vRtrMplsFwdPlcyNhgNHTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFwdPlcyNhgNHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsFwdPlcyNhgNHTable has an entry for each next-hop
configured in a Forwarding Policy next-hop group."
::= { tmnxMplsObjs 70 }
vRtrMplsFwdPlcyNhgNHEntry OBJECT-TYPE
SYNTAX VRtrMplsFwdPlcyNhgNHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configuration of a next-hop in a
Forwarding Policy next-hop group.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsFwdPlcyName,
vRtrMplsFwdPlcyNHGrpIdx,
vRtrMplsFwdPlcyNhgNHType
}
::= { vRtrMplsFwdPlcyNhgNHTable 1 }
VRtrMplsFwdPlcyNhgNHEntry ::= SEQUENCE
{
vRtrMplsFwdPlcyNhgNHType INTEGER,
vRtrMplsFwdPlcyNhgNHRowStatus RowStatus,
vRtrMplsFwdPlcyNhgNHLastChanged TimeStamp,
vRtrMplsFwdPlcyNhgNHOperState TmnxOperState,
vRtrMplsFwdPlcyNhgNHAddrType InetAddressType,
vRtrMplsFwdPlcyNhgNHAddr InetAddress
}
vRtrMplsFwdPlcyNhgNHType OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
backup (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHType specifies the type of next-hop.
When the value of vRtrMplsFwdPlcyNhgNHType is set to 'primary', this
next-hop will be the primary next-hop in the next-hop group.
When the value of vRtrMplsFwdPlcyNhgNHType is set to 'backup', this
next-hop will be the backup next-hop in the next-hop group."
::= { vRtrMplsFwdPlcyNhgNHEntry 1 }
vRtrMplsFwdPlcyNhgNHRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHRowStatus controls the creation and
deletion of rows in the table."
::= { vRtrMplsFwdPlcyNhgNHEntry 2 }
vRtrMplsFwdPlcyNhgNHLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsFwdPlcyNhgNHEntry 3 }
vRtrMplsFwdPlcyNhgNHOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHOperState indicates the current
operational state of the next-hop."
::= { vRtrMplsFwdPlcyNhgNHEntry 4 }
vRtrMplsFwdPlcyNhgNHAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHAddrType specifies the type of
vRtrMplsFwdPlcyNhgNHAddr."
DEFVAL { unknown }
::= { vRtrMplsFwdPlcyNhgNHEntry 5 }
vRtrMplsFwdPlcyNhgNHAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHAddr specifies the next-hop address."
DEFVAL { ''H }
::= { vRtrMplsFwdPlcyNhgNHEntry 6 }
vRtrMplsFwdPlcyGenTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenTblLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsFwdPlcyGenTable."
::= { tmnxMplsObjs 71 }
vRtrMplsFwdPlcyGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFwdPlcyGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsFwdPlcyGenTable contains objects for general control and
management of MPLS Forwarding Policies within a virtual router."
::= { tmnxMplsObjs 72 }
vRtrMplsFwdPlcyGenEntry OBJECT-TYPE
SYNTAX VRtrMplsFwdPlcyGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains objects for general control and management of
MPLS Forwarding Policies within a virtual router.
Entries can be created and deleted via SNMP SET operations."
INDEX { vRtrID }
::= { vRtrMplsFwdPlcyGenTable 1 }
VRtrMplsFwdPlcyGenEntry ::= SEQUENCE
{
vRtrMplsFwdPlcyGenRowStatus RowStatus,
vRtrMplsFwdPlcyGenLastChanged TimeStamp,
vRtrMplsFwdPlcyGenAdminState TmnxAdminState,
vRtrMplsFwdPlcyGenOperState TmnxOperState,
vRtrMplsFwdPlcyGenOperDownReason INTEGER,
vRtrMplsFwdPlcyGenReservedLblBlk TLNamedItemOrEmpty
}
vRtrMplsFwdPlcyGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenRowStatus controls the creation and
deletion of rows in the table."
::= { vRtrMplsFwdPlcyGenEntry 1 }
vRtrMplsFwdPlcyGenLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsFwdPlcyGenEntry 2 }
vRtrMplsFwdPlcyGenAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenAdminState specifies the current
administrative state for Forwarding Policies configuration."
DEFVAL { outOfService }
::= { vRtrMplsFwdPlcyGenEntry 3 }
vRtrMplsFwdPlcyGenOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenOperState indicates the current
operational state of Forwarding Policies."
::= { vRtrMplsFwdPlcyGenEntry 4 }
vRtrMplsFwdPlcyGenOperDownReason OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
adminDown (1),
mplsOperDown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenOperDownReason indicates the reason due
to which Forwarding Policies is operationally down."
::= { vRtrMplsFwdPlcyGenEntry 5 }
vRtrMplsFwdPlcyGenReservedLblBlk OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyGenReservedLblBlk identifies the reserved
label block used by Forwarding Policies."
DEFVAL { "" }
::= { vRtrMplsFwdPlcyGenEntry 6 }
vRtrMplsFwdPlcyStatsTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyStatsTblLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsFwdPlcyStatsTable."
::= { tmnxMplsObjs 73 }
vRtrMplsFwdPlcyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFwdPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsFwdPlcyStatsTable contains objects for general control and
management of Statistics for MPLS Forwarding Policies within a
virtual router."
::= { tmnxMplsObjs 74 }
vRtrMplsFwdPlcyStatsEntry OBJECT-TYPE
SYNTAX VRtrMplsFwdPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains objects for general control and management of
Statistics for MPLS Forwarding Policies within a virtual router.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsFwdPlcyName,
vRtrMplsFwdPlcyStatsType
}
::= { vRtrMplsFwdPlcyStatsTable 1 }
VRtrMplsFwdPlcyStatsEntry ::= SEQUENCE
{
vRtrMplsFwdPlcyStatsType INTEGER,
vRtrMplsFwdPlcyStatsRowStatus RowStatus,
vRtrMplsFwdPlcyStatsLastChanged TimeStamp,
vRtrMplsFwdPlcyStatsAdminState TmnxAdminState
}
vRtrMplsFwdPlcyStatsType OBJECT-TYPE
SYNTAX INTEGER {
ingress (1),
egress (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyStatsType specifies whether the type of
statistics is ingress or egress."
::= { vRtrMplsFwdPlcyStatsEntry 1 }
vRtrMplsFwdPlcyStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyStatsRowStatus controls the creation and
deletion of rows in the table."
::= { vRtrMplsFwdPlcyStatsEntry 2 }
vRtrMplsFwdPlcyStatsLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyStatsLastChanged indicates the sysUpTime
when this row was last modified."
::= { vRtrMplsFwdPlcyStatsEntry 3 }
vRtrMplsFwdPlcyStatsAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyStatsAdminState specifies the current
administrative state for Forwarding Policy statistics configuration."
DEFVAL { outOfService }
::= { vRtrMplsFwdPlcyStatsEntry 4 }
vRtrMplsBindLblPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsBindLblPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsBindLblPathTable has an entry for each forwarding path
associated with a binding label for a virtual router in the system."
::= { tmnxMplsObjs 75 }
vRtrMplsBindLblPathEntry OBJECT-TYPE
SYNTAX VRtrMplsBindLblPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a forwarding path associated with a binding
label.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrMplsBindLblPathOwner,
vRtrID,
vRtrMplsBindLbl,
vRtrMplsBindLblPathId
}
::= { vRtrMplsBindLblPathTable 1 }
VRtrMplsBindLblPathEntry ::= SEQUENCE
{
vRtrMplsBindLbl TmnxMplsLabel,
vRtrMplsBindLblPathId Unsigned32,
vRtrMplsBindLblPathOwner INTEGER,
vRtrMplsBindLblPathName TLNamedItem,
vRtrMplsBindLblPathOperState TmnxOperState,
vRtrMplsBindLblPathLastOperChg TimeStamp,
vRtrMplsBindLblOperDownReason INTEGER,
vRtrMplsBindLblPathNumNHGrpCnt Unsigned32,
vRtrMplsBindLblPathRetryCount Counter32,
vRtrMplsBindLblPathRetryTimeRem Unsigned32,
vRtrMplsBindLblPathRevertTimer Unsigned32,
vRtrMplsBindLblPathIngStatsEnabl TruthValue,
vRtrMplsBindLblPathPref Unsigned32,
vRtrMplsBLPathIngStatOperState TmnxOperState,
vRtrMplsBindLblPathEgrStatsEnabl TruthValue,
vRtrMplsBLPathEgrStatOperState TmnxOperState
}
vRtrMplsBindLbl OBJECT-TYPE
SYNTAX TmnxMplsLabel
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLbl specifies the binding label for the
forwarding path."
::= { vRtrMplsBindLblPathEntry 1 }
vRtrMplsBindLblPathId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathId specifies the path ID for the
forwarding path. Path ID will be unique amongst path associated with
the same binding label."
::= { vRtrMplsBindLblPathEntry 2 }
vRtrMplsBindLblPathOwner OBJECT-TYPE
SYNTAX INTEGER {
mplsFwdPlcy (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathOwner indicates the owner for this
path."
::= { vRtrMplsBindLblPathEntry 3 }
vRtrMplsBindLblPathName OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathName indicates the name for this path."
::= { vRtrMplsBindLblPathEntry 4 }
vRtrMplsBindLblPathOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathOperState indicates the operational
state for this path."
::= { vRtrMplsBindLblPathEntry 5 }
vRtrMplsBindLblPathLastOperChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathLastOperChg indicates the timestamp
when the operational state last changed."
::= { vRtrMplsBindLblPathEntry 6 }
vRtrMplsBindLblOperDownReason OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
memAllocFailed (1),
invEndPointAddr (2),
invBindingLbl (3),
duplicatePlcy (4),
invalidNextHop (5),
iomPgmFailed (6),
backpressured (7),
higherPrefPlcyPgmed (8),
lblNotAvailable (9),
statsAllocFailed (10),
maxPlcyExceeded (11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblOperDownReason indicates the reason for
the path being operationally down."
::= { vRtrMplsBindLblPathEntry 7 }
vRtrMplsBindLblPathNumNHGrpCnt OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNumNHGrpCnt indicates the number of
next-hop groups for this path."
::= { vRtrMplsBindLblPathEntry 8 }
vRtrMplsBindLblPathRetryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathRetryCount indicates the number of
retry attempts to bring up this path."
::= { vRtrMplsBindLblPathEntry 9 }
vRtrMplsBindLblPathRetryTimeRem OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathRetryTimeRem indicates the time
remaining till the next retry to bring up this path."
::= { vRtrMplsBindLblPathEntry 10 }
vRtrMplsBindLblPathRevertTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathRevertTimer indicates the revert timer
for the path."
::= { vRtrMplsBindLblPathEntry 11 }
vRtrMplsBindLblPathIngStatsEnabl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathIngStatsEnabl indicates whether
ingress statistics are enabled for this path."
::= { vRtrMplsBindLblPathEntry 12 }
vRtrMplsBindLblPathPref OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathPref indicates the preference for this
path."
::= { vRtrMplsBindLblPathEntry 13 }
vRtrMplsBLPathIngStatOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBLPathIngStatOperState indicates the operational
state of ingress statistics for this path."
::= { vRtrMplsBindLblPathEntry 14 }
vRtrMplsBindLblPathEgrStatsEnabl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathEgrStatsEnabl indicates whether egress
statistics are enabled for this path."
::= { vRtrMplsBindLblPathEntry 15 }
vRtrMplsBLPathEgrStatOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBLPathEgrStatOperState indicates the operational
state of egress statistics for this path."
::= { vRtrMplsBindLblPathEntry 16 }
vRtrMplsBindLblPathNhgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsBindLblPathNhgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsBindLblPathNhgTable has an entry for each next-hop group
associated with a binding label path."
::= { tmnxMplsObjs 76 }
vRtrMplsBindLblPathNhgEntry OBJECT-TYPE
SYNTAX VRtrMplsBindLblPathNhgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a next-hop group associated with a binding
label path.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrMplsBindLblPathOwner,
vRtrID,
vRtrMplsBindLbl,
vRtrMplsBindLblPathId,
vRtrMplsBindLblPathNhgIndex
}
::= { vRtrMplsBindLblPathNhgTable 1 }
VRtrMplsBindLblPathNhgEntry ::= SEQUENCE
{
vRtrMplsBindLblPathNhgIndex Unsigned32,
vRtrMplsBindLblPathNhgOperState TmnxOperState,
vRtrMplsBindLblPathNHgResType INTEGER,
vRtrMplsBindLblPathNhgLoadBalWt Unsigned32,
vRtrMplsBindLblPathNhgFailovrCnt Counter32,
vRtrMplsBindLblPathNhgRevertCnt Counter32,
vRtrMplsBindLblPathNhgRevTimeRem Counter32,
vRtrMplsBindLblPathNhgDownReason INTEGER,
vRtrMplsBindLblPathNhgWeights Unsigned32
}
vRtrMplsBindLblPathNhgIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgIndex indicates the next-hop group
index."
::= { vRtrMplsBindLblPathNhgEntry 1 }
vRtrMplsBindLblPathNhgOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgOperState indicates the operational
state of this next-hop group."
::= { vRtrMplsBindLblPathNhgEntry 2 }
vRtrMplsBindLblPathNHgResType OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
indirect (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNHgResType indicates the resolution
type of next-hop group.
When the value of vRtrMplsBindLblPathNHgResType is 'direct', the
next-hops in this group must resolve to direct routes for for them to
be operational.
When the value of vRtrMplsBindLblPathNHgResType is 'indirect', the
next-hops in this group must resolve to indirect routes for for them
to be operational."
::= { vRtrMplsBindLblPathNhgEntry 3 }
vRtrMplsBindLblPathNhgLoadBalWt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgLoadBalWt indicates the
load-balancing weight for this next-hop group."
::= { vRtrMplsBindLblPathNhgEntry 4 }
vRtrMplsBindLblPathNhgFailovrCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgFailovrCnt indicates the number of
failovers from primary to backup next-hop for this next-hop group"
::= { vRtrMplsBindLblPathNhgEntry 5 }
vRtrMplsBindLblPathNhgRevertCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgRevertCnt indicates the number of
reverts from backup to primary next-hop for this next-hop group."
::= { vRtrMplsBindLblPathNhgEntry 6 }
vRtrMplsBindLblPathNhgRevTimeRem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgRevTimeRem indicates the time
remaining to revert from backup to primary next-hop."
::= { vRtrMplsBindLblPathNhgEntry 7 }
vRtrMplsBindLblPathNhgDownReason OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
nextHopNotResolved (1),
nextHopIsLocal (3),
nextHopIsMcast (4),
resTypeMismatch (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgDownReason indicates the reason for
the path NHG being operationally down."
::= { vRtrMplsBindLblPathNhgEntry 8 }
vRtrMplsBindLblPathNhgWeights OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgWeights indicates the weights for
the path next hop group."
::= { vRtrMplsBindLblPathNhgEntry 9 }
vRtrMplsBindLblPathNhgNHTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsBindLblPathNhgNHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsBindLblPathNhgNHTable has an entry for each next-hop in a
next-hop group associated with a binding label path."
::= { tmnxMplsObjs 77 }
vRtrMplsBindLblPathNhgNHEntry OBJECT-TYPE
SYNTAX VRtrMplsBindLblPathNhgNHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a next-hop for a next-hop group associated
with a binding label path.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrMplsBindLblPathOwner,
vRtrID,
vRtrMplsBindLbl,
vRtrMplsBindLblPathId,
vRtrMplsBindLblPathNhgIndex,
vRtrMplsBindLblPathNhgNHType
}
::= { vRtrMplsBindLblPathNhgNHTable 1 }
VRtrMplsBindLblPathNhgNHEntry ::= SEQUENCE
{
vRtrMplsBindLblPathNhgNHType INTEGER,
vRtrMplsBindLblPathNhgNHAddrType InetAddressType,
vRtrMplsBindLblPathNhgNHAddr InetAddress,
vRtrMplsBindLblPathNhgNHResolved TruthValue,
vRtrMplsBindLblPathNhgNHOutIf InterfaceIndexOrZero,
vRtrMplsBindLblPathNhgNHDownCode INTEGER,
vRtrMplsBindLblPathNhgNHEgrOper TmnxOperState
}
vRtrMplsBindLblPathNhgNHType OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
backup (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHType specifies the type of
next-hop.
When the value of vRtrMplsBindLblPathNhgNHType is set to 'primary',
this next-hop will be the primary next-hop in the next-hop group.
When the value of vRtrMplsBindLblPathNhgNHType is set to 'backup',
this next-hop will be the backup next-hop in the next-hop group."
::= { vRtrMplsBindLblPathNhgNHEntry 1 }
vRtrMplsBindLblPathNhgNHAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHAddrType indicates the address
type of the next-hop."
::= { vRtrMplsBindLblPathNhgNHEntry 2 }
vRtrMplsBindLblPathNhgNHAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHAddr indicates the address of the
next-hop."
::= { vRtrMplsBindLblPathNhgNHEntry 3 }
vRtrMplsBindLblPathNhgNHResolved OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHResolved indicates if next-hop is
resolved or not."
::= { vRtrMplsBindLblPathNhgNHEntry 4 }
vRtrMplsBindLblPathNhgNHOutIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHOutIf indicates the index of the
outgoing interface that the next-hop resolved to if it is a direct
next-hop.
A value of 0 indicates that either the next-hop is not resolved or
that the next-hop is indirect."
::= { vRtrMplsBindLblPathNhgNHEntry 5 }
vRtrMplsBindLblPathNhgNHDownCode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
nextHopNotResolved (1),
nextHopIsLocal (3),
nextHopIsMcast (4),
resTypeMismatch (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHDownCode indicates the reason for
the path NHG NH being not resolved."
::= { vRtrMplsBindLblPathNhgNHEntry 6 }
vRtrMplsBindLblPathNhgNHEgrOper OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNhgNHEgrOper indicates the operational
state of the egress stats in this next-hop group next hop."
::= { vRtrMplsBindLblPathNhgNHEntry 7 }
vRtrMplsBindLblIngrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsBindLblIngrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsBindLblIngrStatsTable has an entry for ingress statistics
associated with a binding label path."
::= { tmnxMplsObjs 78 }
vRtrMplsBindLblIngrStatsEntry OBJECT-TYPE
SYNTAX VRtrMplsBindLblIngrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents ingress statistics collected for a binding
label path.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsBindLblPathOwner,
vRtrMplsBindLbl
}
::= { vRtrMplsBindLblIngrStatsTable 1 }
VRtrMplsBindLblIngrStatsEntry ::= SEQUENCE
{
vRtrMplsBindLblIngrAggPkts Counter64,
vRtrMplsBindLblIngrAggOctets Counter64
}
vRtrMplsBindLblIngrAggPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total of number of ingress packets for this binding label path."
::= { vRtrMplsBindLblIngrStatsEntry 1 }
vRtrMplsBindLblIngrAggOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total of number of ingress octets for this binding label path.."
::= { vRtrMplsBindLblIngrStatsEntry 2 }
vRtrMplsEndptPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsEndptPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsEndptPathTable has an entry for each forwarding path
associated with an endpoint address for a virtual router in the
system."
::= { tmnxMplsObjs 79 }
vRtrMplsEndptPathEntry OBJECT-TYPE
SYNTAX VRtrMplsEndptPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a forwarding path associated with an
endpoint path.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrMplsEndptPathOwner,
vRtrID,
vRtrMplsEndptAddrType,
vRtrMplsEndptAddress,
vRtrMplsEndptPathId
}
::= { vRtrMplsEndptPathTable 1 }
VRtrMplsEndptPathEntry ::= SEQUENCE
{
vRtrMplsEndptAddrType InetAddressType,
vRtrMplsEndptAddress InetAddress,
vRtrMplsEndptPathId Unsigned32,
vRtrMplsEndptPathOwner INTEGER,
vRtrMplsEndptPathName TLNamedItem,
vRtrMplsEndptPathOperState TmnxOperState,
vRtrMplsEndptPathLastOperChg TimeStamp,
vRtrMplsEndptPathOperDownReason INTEGER,
vRtrMplsEndptPathNHGrpCnt Unsigned32,
vRtrMplsEndptPathRetryCount Counter32,
vRtrMplsEndptPathRetryTimeRem Unsigned32,
vRtrMplsEndptPathRevertTimer Unsigned32,
vRtrMplsEndptPathPref Unsigned32,
vRtrMplsEndptPathTTMPref Unsigned32,
vRtrMplsEndptPathMetric Unsigned32,
vRtrMplsEndptPathEgrStatsEnabl TruthValue,
vRtrMplsEndptPathEgrStatsOper TmnxOperState
}
vRtrMplsEndptAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptAddrType indicates the address type of the
endpoint."
::= { vRtrMplsEndptPathEntry 1 }
vRtrMplsEndptAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptAddress indicates the address of the
endpoint."
::= { vRtrMplsEndptPathEntry 2 }
vRtrMplsEndptPathId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathId indicates the path ID for the
forwarding path. Path ID will be unique amongst path associated with
the same endpoint address."
::= { vRtrMplsEndptPathEntry 3 }
vRtrMplsEndptPathOwner OBJECT-TYPE
SYNTAX INTEGER {
mplsFwdPlcy (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathOwner indicates the owner for this path."
::= { vRtrMplsEndptPathEntry 4 }
vRtrMplsEndptPathName OBJECT-TYPE
SYNTAX TLNamedItem
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathName indicates the name for this path."
::= { vRtrMplsEndptPathEntry 5 }
vRtrMplsEndptPathOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathOperState indicates the operational
state for this path."
::= { vRtrMplsEndptPathEntry 6 }
vRtrMplsEndptPathLastOperChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathLastOperChg indicates the timestamp when
the operational state last changed."
::= { vRtrMplsEndptPathEntry 7 }
vRtrMplsEndptPathOperDownReason OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
memAllocFailed (1),
invEndPointAddr (2),
duplicatePlcy (3),
invalidNextHop (4),
iomPgmFailed (5),
backpressured (6),
higherPrefPlcyPgmed (7),
statsAllocFailed (8),
maxPlcyExceeded (9),
noNextHops (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathOperDownReason indicates the reason for
the path being operationally down."
::= { vRtrMplsEndptPathEntry 8 }
vRtrMplsEndptPathNHGrpCnt OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNHGrpCnt indicates the number of
next-hop groups for this path."
::= { vRtrMplsEndptPathEntry 9 }
vRtrMplsEndptPathRetryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathRetryCount indicates the number of retry
attempts to bring up this path."
::= { vRtrMplsEndptPathEntry 10 }
vRtrMplsEndptPathRetryTimeRem OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathRetryTimeRem indicates the time
remaining till the next retry to bring up this path."
::= { vRtrMplsEndptPathEntry 11 }
vRtrMplsEndptPathRevertTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathRevertTimer indicates the revert timer
for the path."
::= { vRtrMplsEndptPathEntry 12 }
vRtrMplsEndptPathPref OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathPref indicates the preference for this
path."
::= { vRtrMplsEndptPathEntry 13 }
vRtrMplsEndptPathTTMPref OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathTTMPref indicates the TTM preference for
endpoint config."
::= { vRtrMplsEndptPathEntry 14 }
vRtrMplsEndptPathMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value of vRtrMplsEndptPathMetric indicates the metric for
endpoint config."
::= { vRtrMplsEndptPathEntry 15 }
vRtrMplsEndptPathEgrStatsEnabl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathEgrStatsEnabl indicates whether egress
statistics are enabled for endpoint config."
::= { vRtrMplsEndptPathEntry 16 }
vRtrMplsEndptPathEgrStatsOper OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathEgrStatsOper indicates the operational
state of egress statistics for endpoint config."
::= { vRtrMplsEndptPathEntry 17 }
vRtrMplsEndptPathNhgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsEndptPathNhgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsEndptPathNhgTable has an entry for each next-hop group
associated with an endpoint path."
::= { tmnxMplsObjs 80 }
vRtrMplsEndptPathNhgEntry OBJECT-TYPE
SYNTAX VRtrMplsEndptPathNhgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a next-hop group associated with an endpoint
path.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrMplsEndptPathOwner,
vRtrID,
vRtrMplsEndptAddrType,
vRtrMplsEndptAddress,
vRtrMplsEndptPathId,
vRtrMplsEndptPathNhgIndex
}
::= { vRtrMplsEndptPathNhgTable 1 }
VRtrMplsEndptPathNhgEntry ::= SEQUENCE
{
vRtrMplsEndptPathNhgIndex Unsigned32,
vRtrMplsEndptPathNhgOperState TmnxOperState,
vRtrMplsEndptPathNhgResType INTEGER,
vRtrMplsEndptPathNhgLoadBalWt Unsigned32,
vRtrMplsEndptPathNhgFailovrCnt Counter32,
vRtrMplsEndptPathNhgRevertCnt Counter32,
vRtrMplsEndptPathNhgRevTimeRem Counter32,
vRtrMplsEndptPathNhgDownReason TmnxNhgDownReason,
vRtrMplsEndptPathNhgWeights Unsigned32
}
vRtrMplsEndptPathNhgIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgIndex indicates the next-hop group
index."
::= { vRtrMplsEndptPathNhgEntry 1 }
vRtrMplsEndptPathNhgOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgOperState indicates the operational
state of this next-hop group."
::= { vRtrMplsEndptPathNhgEntry 2 }
vRtrMplsEndptPathNhgResType OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
indirect (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgResType indicates the resolution type
of next-hop group.
When the value of vRtrMplsEndptPathNhgResType is 'direct', the
next-hops in this group must resolve to direct routes for for them to
be operational.
When the value of vRtrMplsEndptPathNhgResType is 'indirect', the
next-hops in this group must resolve to indirect routes for for them
to be operational."
::= { vRtrMplsEndptPathNhgEntry 3 }
vRtrMplsEndptPathNhgLoadBalWt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgLoadBalWt indicates the
load-balancing weight for this next-hop group."
::= { vRtrMplsEndptPathNhgEntry 4 }
vRtrMplsEndptPathNhgFailovrCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgFailovrCnt indicates the number of
failovers from primary to backup next-hop for this next-hop group"
::= { vRtrMplsEndptPathNhgEntry 5 }
vRtrMplsEndptPathNhgRevertCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgRevertCnt indicates the number of
reverts from backup to primary next-hop for this next-hop group."
::= { vRtrMplsEndptPathNhgEntry 6 }
vRtrMplsEndptPathNhgRevTimeRem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgRevTimeRem indicates the time
remaining to revert from backup to primary next-hop."
::= { vRtrMplsEndptPathNhgEntry 7 }
vRtrMplsEndptPathNhgDownReason OBJECT-TYPE
SYNTAX TmnxNhgDownReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgDownReason indicates the reason for
the path NHG being operationally down."
::= { vRtrMplsEndptPathNhgEntry 8 }
vRtrMplsEndptPathNhgWeights OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgWeights indicates the weights for the
path next hop group."
::= { vRtrMplsEndptPathNhgEntry 9 }
vRtrMplsEndptPathNhgNHTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsEndptPathNhgNHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsEndptPathNhgNHTable has an entry for each next-hop in a
next-hop group associated with an endpoint path."
::= { tmnxMplsObjs 81 }
vRtrMplsEndptPathNhgNHEntry OBJECT-TYPE
SYNTAX VRtrMplsEndptPathNhgNHEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a next-hop for a next-hop group associated
with an endpoint path.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrMplsEndptPathOwner,
vRtrID,
vRtrMplsEndptAddrType,
vRtrMplsEndptAddress,
vRtrMplsEndptPathId,
vRtrMplsEndptPathNhgIndex,
vRtrMplsEndptPathNhgNHType
}
::= { vRtrMplsEndptPathNhgNHTable 1 }
VRtrMplsEndptPathNhgNHEntry ::= SEQUENCE
{
vRtrMplsEndptPathNhgNHType INTEGER,
vRtrMplsEndptPathNhgNHAddrType InetAddressType,
vRtrMplsEndptPathNhgNHAddr InetAddress,
vRtrMplsEndptPathNhgNHResolved TruthValue,
vRtrMplsEndptPathNhgNHOutIf InterfaceIndexOrZero,
vRtrMplsEndptPathNhgNHDownCode TmnxNhgDownReason,
vRtrMplsEndptPathNhgNHEgrOper TmnxOperState
}
vRtrMplsEndptPathNhgNHType OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
backup (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHType specifies the type of
next-hop.
When the value of vRtrMplsEndptPathNhgNHType is set to 'primary', this
next-hop will be the primary next-hop in the next-hop group.
When the value of vRtrMplsEndptPathNhgNHType is set to 'backup', this
next-hop will be the backup next-hop in the next-hop group."
::= { vRtrMplsEndptPathNhgNHEntry 1 }
vRtrMplsEndptPathNhgNHAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHAddrType indicates the address type
of the next-hop."
::= { vRtrMplsEndptPathNhgNHEntry 2 }
vRtrMplsEndptPathNhgNHAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHAddr indicates the address of the
next-hop."
::= { vRtrMplsEndptPathNhgNHEntry 3 }
vRtrMplsEndptPathNhgNHResolved OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHResolved indicates if next-hop is
resolved or not."
::= { vRtrMplsEndptPathNhgNHEntry 4 }
vRtrMplsEndptPathNhgNHOutIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHOutIf indicates the index of the
outgoing interface that the next-hop resolved to if it is a direct
next-hop.
A value of 0 indicates that either the next-hop is not resolved or
that the next-hop is indirect."
::= { vRtrMplsEndptPathNhgNHEntry 5 }
vRtrMplsEndptPathNhgNHDownCode OBJECT-TYPE
SYNTAX TmnxNhgDownReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHDownCode indicates the reason for
the path NHG NH being not resolved."
::= { vRtrMplsEndptPathNhgNHEntry 6 }
vRtrMplsEndptPathNhgNHEgrOper OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHEgrOper indicates the operational
state of the egress stats in this next-hop group next hop."
::= { vRtrMplsEndptPathNhgNHEntry 7 }
vRtrMplsFwdPlcyNhgNHPushLblTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsFwdPlcyNhgNHPushLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsFwdPlcyNhgNHPushLblTable has an entry for each label to be
pushed onto the packet on the nexthop configured in the system. This
table augments the vRtrMplsFwdPlcyNhgNHTable."
::= { tmnxMplsObjs 82 }
vRtrMplsFwdPlcyNhgNHPushLblEntry OBJECT-TYPE
SYNTAX VRtrMplsFwdPlcyNhgNHPushLblEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a label to be pushed onto the packet on the
nexthop configured for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsFwdPlcyNhgNHEntry }
::= { vRtrMplsFwdPlcyNhgNHPushLblTable 1 }
VRtrMplsFwdPlcyNhgNHPushLblEntry ::= SEQUENCE
{
vRtrMplsFwdPlcyNhgNHPushLabel1 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel2 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel3 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel4 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel5 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel6 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel7 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel8 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel9 Unsigned32,
vRtrMplsFwdPlcyNhgNHPushLabel10 Unsigned32
}
vRtrMplsFwdPlcyNhgNHPushLabel1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel1 indicates the 10th label
to be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 1 }
vRtrMplsFwdPlcyNhgNHPushLabel2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel2 indicates the 9th label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 2 }
vRtrMplsFwdPlcyNhgNHPushLabel3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel3 indicates the 8th label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 3 }
vRtrMplsFwdPlcyNhgNHPushLabel4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel4 indicates the 7th label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 4 }
vRtrMplsFwdPlcyNhgNHPushLabel5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel5 indicates the 6th label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 5 }
vRtrMplsFwdPlcyNhgNHPushLabel6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel6 indicates the 5th label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 6 }
vRtrMplsFwdPlcyNhgNHPushLabel7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel7 indicates the 4th label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 7 }
vRtrMplsFwdPlcyNhgNHPushLabel8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel8 indicates the 3rd label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 8 }
vRtrMplsFwdPlcyNhgNHPushLabel9 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel9 indicates the 2nd label to
be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 9 }
vRtrMplsFwdPlcyNhgNHPushLabel10 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsFwdPlcyNhgNHPushLabel10 indicates the 1st label
to be pushed onto the packet on this nexthop."
DEFVAL { 0 }
::= { vRtrMplsFwdPlcyNhgNHPushLblEntry 10 }
vRtrMplsBindLblPathNhgNHPLTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsBindLblPathNhgNHPLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsBindLblPathNhgNHPLTable has an entry for each push label
for a next-hop type associated with next-hop group with a binding
label path configured in the system."
::= { tmnxMplsObjs 83 }
vRtrMplsBindLblPathNhgNHPLEntry OBJECT-TYPE
SYNTAX VRtrMplsBindLblPathNhgNHPLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a push label for a next-hop type associated
with next-hop group with a binding label path, configured for a
virtual router in the system."
INDEX {
vRtrMplsBindLblPathOwner,
vRtrID,
vRtrMplsBindLbl,
vRtrMplsBindLblPathId,
vRtrMplsBindLblPathNhgIndex,
vRtrMplsBindLblPathNhgNHType,
vRtrMplsBindLblPathNHgNHPLIndex
}
::= { vRtrMplsBindLblPathNhgNHPLTable 1 }
VRtrMplsBindLblPathNhgNHPLEntry ::= SEQUENCE
{
vRtrMplsBindLblPathNHgNHPLIndex Unsigned32,
vRtrMplsBindLblPathNHgNHPLabel Unsigned32
}
vRtrMplsBindLblPathNHgNHPLIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNHgNHPLIndex specifies the index
associated with the push label."
::= { vRtrMplsBindLblPathNhgNHPLEntry 1 }
vRtrMplsBindLblPathNHgNHPLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsBindLblPathNHgNHPLabel specifies the label
number for push label."
::= { vRtrMplsBindLblPathNhgNHPLEntry 2 }
vRtrMplsEndptPathNhgNHPLlbTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsEndptPathNhgNHPLlbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsEndptPathNhgNHPLlbTable has an entry for each push label
for a next-hop type associated with next-hop group with an endpoint
address configured in the system."
::= { tmnxMplsObjs 84 }
vRtrMplsEndptPathNhgNHPLlbEntry OBJECT-TYPE
SYNTAX VRtrMplsEndptPathNhgNHPLlbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a push label for a next-hop type associated
with next-hop group with an endpoint address, configured for a virtual
router in the system."
INDEX {
vRtrMplsEndptPathOwner,
vRtrID,
vRtrMplsEndptAddrType,
vRtrMplsEndptAddress,
vRtrMplsEndptPathId,
vRtrMplsEndptPathNhgIndex,
vRtrMplsEndptPathNhgNHType,
vRtrMplsEndptPathNhgNHPLblIndex
}
::= { vRtrMplsEndptPathNhgNHPLlbTable 1 }
VRtrMplsEndptPathNhgNHPLlbEntry ::= SEQUENCE
{
vRtrMplsEndptPathNhgNHPLblIndex Unsigned32,
vRtrMplsEndptPathNhgNHPLabel Unsigned32
}
vRtrMplsEndptPathNhgNHPLblIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHPLblIndex specifies the index
associated with the push label."
::= { vRtrMplsEndptPathNhgNHPLlbEntry 1 }
vRtrMplsEndptPathNhgNHPLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsEndptPathNhgNHPLabel specifies the label number
for push label."
::= { vRtrMplsEndptPathNhgNHPLlbEntry 2 }
vRtrMplsPceInitGenTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsPceInitGenTblLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsPceInitGenTable."
::= { tmnxMplsObjs 85 }
vRtrMplsPceInitGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsPceInitGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsPceInitGenTable has an entry for per router instance for
PCE initiated LSPs on the system."
::= { tmnxMplsObjs 86 }
vRtrMplsPceInitGenEntry OBJECT-TYPE
SYNTAX VRtrMplsPceInitGenEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents paramters for PCE initiated LSPs on the system.
Entries can be created and deleted via SNMP SET operations."
INDEX { vRtrID }
::= { vRtrMplsPceInitGenTable 1 }
VRtrMplsPceInitGenEntry ::= SEQUENCE
{
vRtrMplsPceInitGenRowStatus RowStatus,
vRtrMplsPceInitGenSrte TruthValue,
vRtrMplsPceInitGenSrteAdminState TmnxAdminState,
vRtrMplsPceInitGenSrteOperState TmnxOperState,
vRtrMplsPceInitGenSrteOperDnRsn INTEGER
}
vRtrMplsPceInitGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control of
vRtrMplsPceInitGenTable entries."
::= { vRtrMplsPceInitGenEntry 1 }
vRtrMplsPceInitGenSrte OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsPceInitGenSrte specifies if PCE initiated SR-TE
LSPs are supported on the system"
DEFVAL { false }
::= { vRtrMplsPceInitGenEntry 2 }
vRtrMplsPceInitGenSrteAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsPceInitGenSrteAdminState specifies the
administrative state of PCE initiated SR-TE LSPs on the system.
The value of vRtrMplsPceInitGenSrteAdminState is valid only if the
value of vRtrMplsPceInitGenSrte is set to 'true'."
DEFVAL { outOfService }
::= { vRtrMplsPceInitGenEntry 3 }
vRtrMplsPceInitGenSrteOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsPceInitGenSrteOperState indicates the
operational state of PCE initiated SR-TE LSPs on the system.
The value of vRtrMplsPceInitGenSrteOperState is valid only if the
value of vRtrMplsPceInitGenSrte is set to 'true'."
::= { vRtrMplsPceInitGenEntry 4 }
vRtrMplsPceInitGenSrteOperDnRsn OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
adminDown (1),
mplsOperDown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsPceInitGenSrteOperDnRsn indicates the reason due
to which PCE Init SRTE LSP are operationally down."
::= { vRtrMplsPceInitGenEntry 5 }
vRtrMplsBindLblNHEgrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsBindLblNHEgrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsBindLblNHEgrStatsTable has an entry for egress statistics
for each next-hop in a next-hop group associated with a binding label
path."
::= { tmnxMplsObjs 87 }
vRtrMplsBindLblNHEgrStatsEntry OBJECT-TYPE
SYNTAX VRtrMplsBindLblNHEgrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a next-hop for a next-hop group associated
with a binding label path.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsBindLblPathNhgNHEntry }
::= { vRtrMplsBindLblNHEgrStatsTable 1 }
VRtrMplsBindLblNHEgrStatsEntry ::= SEQUENCE
{
vRtrMplsBindLblEgrStatsAggPkts Counter64,
vRtrMplsBindLblEgrStatsAggOctets Counter64
}
vRtrMplsBindLblEgrStatsAggPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total of number of egress packets for this binding label path
next-hop group next-hop."
::= { vRtrMplsBindLblNHEgrStatsEntry 1 }
vRtrMplsBindLblEgrStatsAggOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total of number of egress octets for this binding label path
next-hop group next-hop"
::= { vRtrMplsBindLblNHEgrStatsEntry 2 }
vRtrMplsEndptNHEgrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsEndptNHEgrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsEndptNHEgrStatsTable has an entry for egress statistics
for each next-hop in a next-hop group associated with an endpoint
path."
::= { tmnxMplsObjs 88 }
vRtrMplsEndptNHEgrStatsEntry OBJECT-TYPE
SYNTAX VRtrMplsEndptNHEgrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a next-hop for a next-hop group associated
with an endpoint path.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrMplsEndptPathNhgNHEntry }
::= { vRtrMplsEndptNHEgrStatsTable 1 }
VRtrMplsEndptNHEgrStatsEntry ::= SEQUENCE
{
vRtrMplsEndptEgrStatsAggPkts Counter64,
vRtrMplsEndptEgrStatsAggOctets Counter64
}
vRtrMplsEndptEgrStatsAggPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total of number of egress packets for this endpoint path next-hop
group next-hop."
::= { vRtrMplsEndptNHEgrStatsEntry 1 }
vRtrMplsEndptEgrStatsAggOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total of number of egress octets for this endpoint path next-hop
group next-hop"
::= { vRtrMplsEndptNHEgrStatsEntry 2 }
vRtrMplsLspPathEgressStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspPathEgressStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspPathEgressStatsTable has an entry for egress statistics
associated with an LSP path."
::= { tmnxMplsObjs 89 }
vRtrMplsLspPathEgressStatsEntry OBJECT-TYPE
SYNTAX VRtrMplsLspPathEgressStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of egress statistics for an LSP
path.
Entries cannot be created and deleted via SNMP SET operations. Entries
in this table are created when egress statistics is enabled for an
LSP which supports per path egress statistics."
INDEX {
vRtrID,
vRtrMplsLspIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId
}
::= { vRtrMplsLspPathEgressStatsTable 1 }
VRtrMplsLspPathEgressStatsEntry ::= SEQUENCE
{
vRtrMplsLspPathEgrStatsOperState TmnxOperState,
vRtrMplsLspEgressStatsAggrPkts Counter64,
vRtrMplsLspEgressStatsAggrOctets Counter64
}
vRtrMplsLspPathEgrStatsOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspPathEgrStatsOperState indicates the
operational state of egress statistics for the LSP path."
::= { vRtrMplsLspPathEgressStatsEntry 1 }
vRtrMplsLspEgressStatsAggrPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspEgressStatsAggrPkts indicates the total number
of egress packets for this LSP path"
::= { vRtrMplsLspPathEgressStatsEntry 2 }
vRtrMplsLspEgressStatsAggrOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspEgressStatsAggrOctets indicates the total
number of egress octets for this LSP path"
::= { vRtrMplsLspPathEgressStatsEntry 3 }
vRtrMplsPathHopTableLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsPathHopTableLastChg indicates the sysUpTime at
the time of the last modification of an entry in the
vRtrMplsPathHopTable."
::= { tmnxMplsObjs 90 }
vRtrMplsPathHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsPathHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsPathHopTable has an entry to indicate the hops, strict or
loose, for an MPLS tunnel."
::= { tmnxMplsObjs 91 }
vRtrMplsPathHopEntry OBJECT-TYPE
SYNTAX VRtrMplsPathHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a hop, strict or loose, for an MPLS tunnel
configured for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsPathIndex,
vRtrMplsPathHopIndex
}
::= { vRtrMplsPathHopTable 1 }
VRtrMplsPathHopEntry ::= SEQUENCE
{
vRtrMplsPathIndex Unsigned32,
vRtrMplsPathHopIndex Unsigned32,
vRtrMplsPathHopRowStatus RowStatus,
vRtrMplsPathHopLastChange TimeStamp,
vRtrMplsPathHopAddrType InetAddressType,
vRtrMplsPathHopAddr InetAddress,
vRtrMplsPathHopStrictOrLoose INTEGER,
vRtrMplsPathHopSidLabel Unsigned32
}
vRtrMplsPathIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsPathIndex indicates the primary index to
identify a particular explicit route object."
::= { vRtrMplsPathHopEntry 1 }
vRtrMplsPathHopIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsPathHopIndex indicates the secondary index to
identify a particular hop."
::= { vRtrMplsPathHopEntry 2 }
vRtrMplsPathHopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control of
vRtrMplsPathHopTable entries."
::= { vRtrMplsPathHopEntry 3 }
vRtrMplsPathHopLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsPathHopEntry 4 }
vRtrMplsPathHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsPathHopAddrType specifies the type of
vRtrMplsPathHopAddr."
DEFVAL { unknown }
::= { vRtrMplsPathHopEntry 5 }
vRtrMplsPathHopAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsPathHopAddr specifies the hop address."
DEFVAL { ''H }
::= { vRtrMplsPathHopEntry 6 }
vRtrMplsPathHopStrictOrLoose OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
strict (1),
loose (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsPathHopStrictOrLoose indicates whether this
tunnel hop is routed in a strict or loose fashion."
DEFVAL { notApplicable }
::= { vRtrMplsPathHopEntry 7 }
vRtrMplsPathHopSidLabel OBJECT-TYPE
SYNTAX Unsigned32 (32..1048575 | 4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsPathHopSidLabel indicates the SID for this hop."
DEFVAL { 4294967295 }
::= { vRtrMplsPathHopEntry 8 }
vRtrMplsLspTemplateExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTemplateExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTemplateTable has an entry for each Labeled Switch Path
Template(LSP Template) configured for a virtual router in the system.
This table augments the vRtrMplsLspTemplateTable."
::= { tmnxMplsObjs 92 }
vRtrMplsLspTemplateExtEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTemplateExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Labeled Switch Path Template (LSP
Template) configured for a virtual router in the system.
Entries in this table can be created and deleted via SNMP SET
operations."
AUGMENTS { vRtrMplsLspTemplateEntry }
::= { vRtrMplsLspTemplateExtTable 1 }
VRtrMplsLspTemplateExtEntry ::= SEQUENCE
{
vRtrMplsLspTempExtFallbkPathComp INTEGER,
vRtrMplsLspTempExtPceControl TruthValue,
vRtrMplsLspTempExtOverrideTunElc TruthValue,
vRtrMplsLspTempExtPrefTransFrr TruthValue,
vRtrMplsLspTempExtReturnPathLbl Unsigned32,
vRtrMplsLspTempExtSoftPreemption TruthValue
}
vRtrMplsLspTempExtFallbkPathComp OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
none (1),
localCspf (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempExtFallbkPathComp specifies fallback path
computation method used for the LSP Template.
If the value of vRtrMplsLspTempExtFallbkPathComp is 'localCspf' the
fallback path computation method used for the LSP Template is local
CSPF.
If the value of vRtrMplsLspTempExtFallbkPathComp is 'notApplicable'
fallback path computation method is not applicable to the LSP
Template.
The default value for vRtrMplsLspTempExtFallbkPathComp is
'notApplicable'."
DEFVAL { notApplicable }
::= { vRtrMplsLspTemplateExtEntry 1 }
vRtrMplsLspTempExtPceControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempExtPceControl specifies whether the
control of the LSP path will be delegated to Path Computation Engine
(PCE). Path delegation can be done on computed paths and paths
computed using PCE."
DEFVAL { false }
::= { vRtrMplsLspTemplateExtEntry 2 }
vRtrMplsLspTempExtOverrideTunElc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempExtOverrideTunElc specifies whether to
override the entropy label capability (ELC) for SR-TE LSPs using this
template and for which the path has been computed by PCE. "
DEFVAL { false }
::= { vRtrMplsLspTemplateExtEntry 3 }
vRtrMplsLspTempExtPrefTransFrr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempExtPrefTransFrr specifies whether to defer
hardware fast-reroute protection to the SR tunnel for SR-TE LSPs
using this template."
DEFVAL { false }
::= { vRtrMplsLspTemplateExtEntry 4 }
vRtrMplsLspTempExtReturnPathLbl OBJECT-TYPE
SYNTAX Unsigned32 (32..1048512 | 4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempExtReturnPathLbl indicates the return path
label for the LSP Template."
DEFVAL { 4294967295 }
::= { vRtrMplsLspTemplateExtEntry 5 }
vRtrMplsLspTempExtSoftPreemption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempExtSoftPreemption specifies whether soft
preemption is enabled or disabled for P2MP RSVP LSP templates."
DEFVAL { false }
::= { vRtrMplsLspTemplateExtEntry 6 }
vRtrMplsLspTempPathProTblLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempPathProTblLastChg indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrMplsLspTempPathProfTable."
::= { tmnxMplsObjs 95 }
vRtrMplsLspTempPathProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrMplsLspTempPathProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrMplsLspTempPathProfTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system."
::= { tmnxMplsObjs 96 }
vRtrMplsLspTempPathProfEntry OBJECT-TYPE
SYNTAX VRtrMplsLspTempPathProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Labeled Switch Path Template (LSP Template)
configured for a virtual router in the system.
Entries can be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrMplsLspTemplateName,
vRtrMplsLspTempPathProfId
}
::= { vRtrMplsLspTempPathProfTable 1 }
VRtrMplsLspTempPathProfEntry ::= SEQUENCE
{
vRtrMplsLspTempPathProfId Unsigned32,
vRtrMplsLspTempPathProfRowStatus RowStatus,
vRtrMplsLspTempPathProfLastChg TimeStamp,
vRtrMplsLspTempPathProfGroupId Unsigned32
}
vRtrMplsLspTempPathProfId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempPathProfId specifies the profile id of for
the specified LSP Template."
::= { vRtrMplsLspTempPathProfEntry 1 }
vRtrMplsLspTempPathProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control
of vRtrMplsLspTempPathProfTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspTemplateName must
have been assigned a valid value."
::= { vRtrMplsLspTempPathProfEntry 2 }
vRtrMplsLspTempPathProfLastChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime when this row was last modified."
::= { vRtrMplsLspTempPathProfEntry 3 }
vRtrMplsLspTempPathProfGroupId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMplsLspTempPathProfGroupId specifies the group id
used by the path profile for the specified LSP Template."
DEFVAL { 0 }
::= { vRtrMplsLspTempPathProfEntry 4 }
tmnxMplsConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 6 }
tmnxMplsCompliances OBJECT IDENTIFIER ::= { tmnxMplsConformance 1 }
tmnxMplsV3v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 3.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalR2r1Group,
tmnxMplsLspR2r1Group,
tmnxMplsLspPathGroup,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup
}
::= { tmnxMplsCompliances 3 }
tmnxMplsV5v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 5.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV5v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathGroup,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup
}
::= { tmnxMplsCompliances 4 }
tmnxMplsV6v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 6.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV6v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathGroup,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsLspPathV6v0Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group
}
::= { tmnxMplsCompliances 5 }
tmnxMplsV6v1Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 6.1 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV6v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsLspPathV6v1Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group
}
::= { tmnxMplsCompliances 6 }
tmnxMplsV7v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 6.1 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV6v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsLspPathV6v1Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group
}
::= { tmnxMplsCompliances 7 }
tmnxMplsV8v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 8.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV6v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsLspPathV6v1Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group
}
::= { tmnxMplsCompliances 8 }
tmnxMplsV9v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 9.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV6v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsLspPathV6v1Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group
}
::= { tmnxMplsCompliances 9 }
tmnxMplsV10v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 10.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGlobalV6v0Group,
tmnxMplsLspV5v0Group,
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsLspPathV6v1Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsGlobalV10v0Group
}
::= { tmnxMplsCompliances 10 }
tmnxMplsV11v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 11.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsGlobalV11v0Group,
tmnxMplsLspTemplateGroup,
tmnxMplsNotifyV11v0Group,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify
}
::= { tmnxMplsCompliances 11 }
tmnxMplsV12v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 12.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsLspTemplateGroup,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify,
tmnxMplsLspTempInStatsGroup,
tmnxMplsAutoBwUnderflowGroup,
tmnxMplsBgpLabelRetentionGroup,
tmnxMplsGlobalV12v0Group,
tmnxMplsBypassOptGroup,
tmnxMplsGlobalV12v0Group,
tmnxMplsLSPPathV12v0Group,
tmnxMplsGenV12v0Group,
tmnxMplsLSPV12v0Group
}
::= { tmnxMplsCompliances 12 }
tmnxMplsV13v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 12.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsAdminGroupGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsSrlgV6v0Group,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsLspTemplateGroup,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify,
tmnxMplsLspTempInStatsGroup,
tmnxMplsAutoBwUnderflowGroup,
tmnxMplsBgpLabelRetentionGroup,
tmnxMplsBypassOptGroup,
tmnxMplsLSPPathV12v0Group,
tmnxMplsGenV12v0Group,
tmnxMplsLSPV12v0Group,
tmnxMplsLoadBalanceWtV13v0Group,
tmnxMplsLabelSegRouteV13v0Group,
tmnxMplsLabelStaticRgeV13v0Group,
tmnxMplsGlobalV13v0Group,
tmnxMplsClassBasedFwdV13v0Group,
tmnxMplsBfdOnLspV13v0Group
}
::= { tmnxMplsCompliances 13 }
tmnxMplsV14v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 14.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsLspTemplateGroup,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify,
tmnxMplsLspTempInStatsGroup,
tmnxMplsAutoBwUnderflowGroup,
tmnxMplsBgpLabelRetentionGroup,
tmnxMplsBypassOptGroup,
tmnxMplsLSPPathV12v0Group,
tmnxMplsGenV12v0Group,
tmnxMplsLSPV12v0Group,
tmnxMplsLoadBalanceWtV13v0Group,
tmnxMplsLabelSegRouteV13v0Group,
tmnxMplsLabelStaticRgeV13v0Group,
tmnxMplsGlobalV13v0Group,
tmnxMplsClassBasedFwdV13v0Group,
tmnxMplsIfSrlgV14v0Group,
tmnxMplsBfdOnLspV13v0Group,
tmnxMplsSegRouting14v0Group,
tmnxMplsEntropyLabel14v0Group,
tmnxMplsLspTemplEL14v4Group,
tmnxMplsSRLfaOvrhd14v4Group
}
::= { tmnxMplsCompliances 14 }
tmnxMplsV15v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 15.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelARHopGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsIfV6v0Group,
tmnxMplsLspV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsLspTemplateV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsLspTemplateGroup,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify,
tmnxMplsLspTempInStatsGroup,
tmnxMplsAutoBwUnderflowGroup,
tmnxMplsBgpLabelRetentionGroup,
tmnxMplsBypassOptGroup,
tmnxMplsLSPPathV12v0Group,
tmnxMplsGenV12v0Group,
tmnxMplsLoadBalanceWtV13v0Group,
tmnxMplsLabelSegRouteV13v0Group,
tmnxMplsLabelStaticRgeV13v0Group,
tmnxMplsGlobalV13v0Group,
tmnxMplsClassBasedFwdV13v0Group,
tmnxMplsIfSrlgV14v0Group,
tmnxMplsBfdOnLspV13v0Group,
tmnxMplsSegRouting14v0Group,
tmnxMplsEntropyLabel14v0Group,
tmnxMplsLspTemplEL14v4Group,
tmnxMplsSRLfaOvrhd14v4Group,
tmnxMplsLspTempPceReportGroup,
tmnxMplsLspTempSrLbl15v0Group,
tmnxMplsBfdFailureActionGroup,
tmnxMplsClassFwdPlcy15v0Group,
tmnxMplsP2PSrTe15v0Group,
tmnxMplsLspStatsGroup,
tmnxMplsTunnelARHopSIDGroup,
tmnxMplsLSPV15v0Group,
tmnxMplsEntropyLabelSrteGroup
}
::= { tmnxMplsCompliances 15 }
tmnxMplsV16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 16.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsReservedLblBlkGroup,
tmnxMplsIfAltStatsGroup,
vRtrMplsLspAdminTagGroup,
vRtrMplsFwdPlcyV16v0Group,
vRtrMplsFwdPlcyNhgNHPushLblGroup,
vRtrMplsPceInitSrteGroup,
vRtrMplsAutoBwUseLastAdjBWGroup
}
::= { tmnxMplsCompliances 16 }
tmnxMplsV19v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 19.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsGeneralSrTeLspGroup,
tmnxMplsFwdPlcyEgressStatsGroup,
tmnxMplsSrteSBfdGroup,
tmnxMplsGenMaxBypassPlrGroup,
tmnxMplsLspPathEgressStatsGroup,
tmnxMplsLspSelfPingGroup,
tmnxMplsLspNgAddrGroup,
tmnxMplsLspSrTeIpv6Group,
tmnxMplsPathHopGroup,
tmnxMplsLspSelfPingOperGroup,
tmnxMplsNotificationIPv6Group
}
::= { tmnxMplsCompliances 17 }
tmnxMplsV20v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 20.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsIfV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsLspTemplateGroup,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify,
tmnxMplsLspTempInStatsGroup,
tmnxMplsAutoBwUnderflowGroup,
tmnxMplsBgpLabelRetentionGroup,
tmnxMplsBypassOptGroup,
tmnxMplsGenV12v0Group,
tmnxMplsLoadBalanceWtV13v0Group,
tmnxMplsLabelSegRouteV13v0Group,
tmnxMplsLabelStaticRgeV13v0Group,
tmnxMplsGlobalV13v0Group,
tmnxMplsIfSrlgV14v0Group,
tmnxMplsBfdOnLspV13v0Group,
tmnxMplsEntropyLabel14v0Group,
tmnxMplsLspTemplEL14v4Group,
tmnxMplsSRLfaOvrhd14v4Group,
tmnxMplsLspTempPceReportGroup,
tmnxMplsLspTempSrLbl15v0Group,
tmnxMplsBfdFailureActionGroup,
tmnxMplsClassFwdPlcy15v0Group,
tmnxMplsP2PSrTe15v0Group,
tmnxMplsLspStatsGroup,
tmnxMplsTunnelARHopSIDGroup,
tmnxMplsEntropyLabelSrteGroup,
tmnxMplsNotifyObjsLspResource,
tmnxMplsNotifyV20v0Group,
tmnxMplsV20v0Group,
tmnxMplsLspSelfPingV20v0Group,
tmnxMplsSrTeIpv6LspTempGroup,
tmnxMplsTunnelARHopIdTypeGroup,
tmnxMplsLspPcepToLocalGroup,
tmnxMplsGenV20Group,
tmnxMplsGenLspSelfPingV20Group
}
::= { tmnxMplsCompliances 18 }
tmnxMplsV21v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 21.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspPathV6v0Group,
tmnxMplsXCGroup,
tmnxMplsIfGroup,
tmnxMplsTunnelCHopGroup,
tmnxMplsNotificationR2r1Group,
tmnxMplsLabelRangeGroup,
tmnxMplsIfV6v0Group,
tmnxMplsLspV7v0Group,
tmnxMplsGlobalV7v0Group,
tmnxMplsP2mpInstanceGroup,
tmnxMplsP2mpS2lGroup,
tmnxMplsNotificationV7v0Group,
tmnxMplsLspPathV7v0Group,
tmnxMplsSrlgV7v0Group,
tmnxMplsLspStatsV7v0Group,
tmnxMplsLspV8v0Group,
tmnxMplsLspPathV8v0Group,
tmnxMplsNotifyObjsV8v0Group,
tmnxMplsNotificationV8v0Group,
tmnxMplsGlobalV8v0Group,
tmnxMplsLspAutoBWV8v0Group,
tmnxMplsGlobalV9v0Group,
tmnxMplsLspV9v0R4Group,
tmnxMplsNotifV9v0R4Group,
tmnxMplsLspPathV9v0R4Group,
tmnxMplsTpGroup,
tmnxMplsNotifyObjsV10v0Group,
tmnxMplsNotifyV10v0Group,
tmnxMplsFRAdminGroup,
tmnxMplsLspTemplateGroup,
tmnxMplsLspAutoBWFcWtGroup,
tmnxMplsGlobalV11v0R4Group,
tmnxMplsNotifyObjsIgpOverload,
tmnxMplsIgpOverloadNotify,
tmnxMplsLspTempInStatsGroup,
tmnxMplsAutoBwUnderflowGroup,
tmnxMplsBgpLabelRetentionGroup,
tmnxMplsBypassOptGroup,
tmnxMplsGenV12v0Group,
tmnxMplsLoadBalanceWtV13v0Group,
tmnxMplsLabelSegRouteV13v0Group,
tmnxMplsLabelStaticRgeV13v0Group,
tmnxMplsGlobalV13v0Group,
tmnxMplsIfSrlgV14v0Group,
tmnxMplsBfdOnLspV13v0Group,
tmnxMplsEntropyLabel14v0Group,
tmnxMplsLspTemplEL14v4Group,
tmnxMplsSRLfaOvrhd14v4Group,
tmnxMplsLspTempPceReportGroup,
tmnxMplsLspTempSrLbl15v0Group,
tmnxMplsBfdFailureActionGroup,
tmnxMplsClassFwdPlcy15v0Group,
tmnxMplsP2PSrTe15v0Group,
tmnxMplsLspStatsGroup,
tmnxMplsTunnelARHopSIDGroup,
tmnxMplsEntropyLabelSrteGroup,
tmnxMplsNotifyObjsLspResource,
tmnxMplsNotifyV20v0Group,
tmnxMplsV20v0Group,
tmnxMplsLspSelfPingV20v0Group,
tmnxMplsSrTeIpv6LspTempGroup,
tmnxMplsTunnelARHopIdTypeGroup,
tmnxMplsLspPcepToLocalGroup,
tmnxMplsGenV20Group,
tmnxMplsGenLspSelfPingV20Group,
tmnxMplsGenSrTeLspCountV21Group,
tmnxMplsLspV21Group,
tmnxMplsGenTTMV21Group,
tmnxMplsLspPathDegradeV21Group,
tmnxMplsNotifyObjsLspPathFailure,
tmnxMplsNotifyLspPathV21v0Group,
tmnxMplsPccPceOperStateV21Group,
tmnxMplsLspTempExtV21Group,
tmnxMplsLspStatsModeV21Group,
tmnxMplsLspOvrTunnelElcGroup,
tmnxMplsLspTransportFrrGroup,
tmnxMplsLspTempPathProfGroup
}
::= { tmnxMplsCompliances 19 }
tmnxMplsV22v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of extended MPLS on Nokia SROS
series systems 22.0 Release."
MODULE
MANDATORY-GROUPS {
tmnxMplsLspExtBfdGroup,
tmnxMplsLspRateCountersGroup,
tmnxP2mpMplsLspSoftPreemptGroup,
tmnxMplsNotifyV22v0Group
}
::= { tmnxMplsCompliances 20 }
tmnxMplsGroups OBJECT IDENTIFIER ::= { tmnxMplsConformance 2 }
tmnxMplsLspPathGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathTableSpinlock,
vRtrMplsLspPathRowStatus,
vRtrMplsLspPathLastChange,
vRtrMplsLspPathType,
vRtrMplsLspPathCos,
vRtrMplsLspPathProperties,
vRtrMplsLspPathBandwidth,
vRtrMplsLspPathBwProtect,
vRtrMplsLspPathState,
vRtrMplsLspPathPreference,
vRtrMplsLspPathCosSource,
vRtrMplsLspPathClassOfService,
vRtrMplsLspPathSetupPriority,
vRtrMplsLspPathHoldPriority,
vRtrMplsLspPathRecord,
vRtrMplsLspPathHopLimit,
vRtrMplsLspPathSharing,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathInheritance,
vRtrMplsLspPathLspId,
vRtrMplsLspPathRetryTimeRemaining,
vRtrMplsLspPathTunnelARHopListIndex,
vRtrMplsLspPathNegotiatedMTU,
vRtrMplsLspPathFailCode,
vRtrMplsLspPathFailNodeAddr,
vRtrMplsLspPathAdminGroupInclude,
vRtrMplsLspPathAdminGroupExclude,
vRtrMplsLspPathAdaptive,
vRtrMplsLspPathOptimizeTimer,
vRtrMplsLspPathNextOptimize,
vRtrMplsLspPathOperBandwidth,
vRtrMplsLspPathMBBState,
vRtrMplsLspPathResignal,
vRtrMplsLspPathTunnelCRHopListIndex,
vRtrMplsLspPathOperMTU,
vRtrMplsLspPathRecordLabel,
vRtrMplsLspPathTimeUp,
vRtrMplsLspPathTimeDown,
vRtrMplsLspPathRetryAttempts,
vRtrMplsLspPathTransitionCount,
vRtrMplsLspPathCspfQueries
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
path mapping on Nokia SROS series systems."
::= { tmnxMplsGroups 3 }
tmnxMplsXCGroup OBJECT-GROUP
OBJECTS {
vRtrMplsXCIndex,
vRtrMplsInSegmentIfIndex,
vRtrMplsInSegmentLabel,
vRtrMplsOutSegmentIndex,
vRtrMplsERHopTunnelIndex,
vRtrMplsARHopTunnelIndex,
vRtrMplsRsvpSessionIndex,
vRtrMplsXCFailCode,
vRtrMplsXCCHopTableIndex
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
cross-connection mapping on Nokia SROS series systems."
::= { tmnxMplsGroups 4 }
tmnxMplsIfGroup OBJECT-GROUP
OBJECTS {
vRtrMplsIfAdminState,
vRtrMplsIfOperState,
vRtrMplsIfAdminGroup,
vRtrMplsIfTxPktCount,
vRtrMplsIfRxPktCount,
vRtrMplsIfTxOctetCount,
vRtrMplsIfRxOctetCount
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS interfaces
on Nokia SROS series systems."
::= { tmnxMplsGroups 5 }
tmnxMplsTunnelARHopGroup OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelARHopProtection,
vRtrMplsTunnelARHopRecordLabel,
vRtrMplsTunnelARHopRouterId
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS Tunnel AR
hops on Nokia SROS series systems."
::= { tmnxMplsGroups 6 }
tmnxMplsTunnelCHopGroup OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelCHopAddrType,
vRtrMplsTunnelCHopIpv4Addr,
vRtrMplsTunnelCHopIpv4PrefixLen,
vRtrMplsTunnelCHopIpv6Addr,
vRtrMplsTunnelCHopIpv6PrefixLen,
vRtrMplsTunnelCHopAsNumber,
vRtrMplsTunnelCHopLspId,
vRtrMplsTunnelCHopStrictOrLoose
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS CSPF
Tunnel hops on Nokia SROS series systems."
::= { tmnxMplsGroups 7 }
tmnxMplsAdminGroupGroup OBJECT-GROUP
OBJECTS {
vRtrMplsAdminGroupRowStatus,
vRtrMplsAdminGroupValue
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS
administrative groups on Nokia SROS series systems."
::= { tmnxMplsGroups 8 }
tmnxMplsFSGroupGroup OBJECT-GROUP
OBJECTS {
vRtrMplsFSGroupRowStatus,
vRtrMplsFSGroupCost,
vRtrMplsFSGroupParamsRowStatus
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS fate
sharing groups on Nokia SROS series systems."
::= { tmnxMplsGroups 9 }
tmnxMplsNotifyObjsGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspNotificationReasonCode,
vRtrMplsLspPathNotificationReasonCode,
vRtrMplsNotifyRow,
vRtrMplsLspIndex
}
STATUS current
DESCRIPTION
"The group of objects supporting extended MPLS notifications on Nokia
SROS series systems."
::= { tmnxMplsGroups 10 }
tmnxMplsGlobalR2r1Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralLastChange,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralOperState,
vRtrMplsGeneralPropagateTtl,
vRtrMplsGeneralTE,
vRtrMplsGeneralNewLspIndex,
vRtrMplsGeneralOptimizeTimer,
vRtrMplsGeneralFRObject,
vRtrMplsGeneralResignalTimer,
vRtrMplsGeneralStaticLspOriginate,
vRtrMplsGeneralStaticLspTransit,
vRtrMplsGeneralStaticLspTerminate,
vRtrMplsGeneralDynamicLspOriginate,
vRtrMplsGeneralDynamicLspTransit,
vRtrMplsGeneralDynamicLspTerminate,
vRtrMplsGeneralDetourLspOriginate,
vRtrMplsGeneralDetourLspTransit,
vRtrMplsGeneralDetourLspTerminate
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting general management of extended MPLS on
Nokia SROS series systems 2.1 Release."
::= { tmnxMplsGroups 12 }
tmnxMplsLspR2r1Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspRowStatus,
vRtrMplsLspLastChange,
vRtrMplsLspName,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspFromAddr,
vRtrMplsLspToAddr,
vRtrMplsLspType,
vRtrMplsLspOutSegIndx,
vRtrMplsLspRetryTimer,
vRtrMplsLspRetryLimit,
vRtrMplsLspMetric,
vRtrMplsLspDecrementTtl,
vRtrMplsLspCspf,
vRtrMplsLspFastReroute,
vRtrMplsLspFRHopLimit,
vRtrMplsLspFRBandwidth,
vRtrMplsLspClassOfService,
vRtrMplsLspSetupPriority,
vRtrMplsLspHoldPriority,
vRtrMplsLspRecord,
vRtrMplsLspPreference,
vRtrMplsLspBandwidth,
vRtrMplsLspBwProtect,
vRtrMplsLspHopLimit,
vRtrMplsLspNegotiatedMTU,
vRtrMplsLspRsvpResvStyle,
vRtrMplsLspRsvpAdspec,
vRtrMplsLspFRMethod,
vRtrMplsLspFRNodeProtect,
vRtrMplsLspAdminGroupInclude,
vRtrMplsLspAdminGroupExclude,
vRtrMplsLspAdaptive,
vRtrMplsLspInheritance,
vRtrMplsLspOptimizeTimer,
vRtrMplsLspOperFastReroute,
vRtrMplsLspFRObject,
vRtrMplsLspOctets,
vRtrMplsLspPackets,
vRtrMplsLspAge,
vRtrMplsLspTimeUp,
vRtrMplsLspTimeDown,
vRtrMplsLspPrimaryTimeUp,
vRtrMplsLspTransitions,
vRtrMplsLspLastTransition,
vRtrMplsLspPathChanges,
vRtrMplsLspLastPathChange,
vRtrMplsLspConfiguredPaths,
vRtrMplsLspStandbyPaths,
vRtrMplsLspOperationalPaths
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS LSPs on
Nokia SROS series systems 2.1 Release."
::= { tmnxMplsGroups 13 }
tmnxMplsNotificationR2r1Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsStateChange,
vRtrMplsIfStateChange,
vRtrMplsLspUp,
vRtrMplsLspDown,
vRtrMplsLspPathUp,
vRtrMplsLspPathDown,
vRtrMplsLspPathRerouted,
vRtrMplsLspPathResignaled
}
STATUS current
DESCRIPTION
"The group of notifications supporting the extended MPLS feature on
Nokia SROS series systems 2.1 Release."
::= { tmnxMplsGroups 14 }
tmnxMplsLabelRangeGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLabelRangeMin,
vRtrMplsLabelRangeMax,
vRtrMplsLabelRangeAging,
vRtrMplsLabelRangeAvailable,
vRtrMplsStaticLSPLabelOwner,
vRtrMplsStaticSvcLabelOwner
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS label
ranges on Nokia SROS series systems."
::= { tmnxMplsGroups 15 }
tmnxMplsGlobalV5v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralLastChange,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralOperState,
vRtrMplsGeneralPropagateTtl,
vRtrMplsGeneralTE,
vRtrMplsGeneralNewLspIndex,
vRtrMplsGeneralOptimizeTimer,
vRtrMplsGeneralFRObject,
vRtrMplsGeneralResignalTimer,
vRtrMplsGeneralStaticLspOriginate,
vRtrMplsGeneralStaticLspTransit,
vRtrMplsGeneralStaticLspTerminate,
vRtrMplsGeneralDynamicLspOriginate,
vRtrMplsGeneralDynamicLspTransit,
vRtrMplsGeneralDynamicLspTerminate,
vRtrMplsGeneralDetourLspOriginate,
vRtrMplsGeneralDetourLspTransit,
vRtrMplsGeneralDetourLspTerminate,
vRtrMplsGeneralHoldTimer,
vRtrMplsGeneralDynamicBypass
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting general management of extended MPLS on
Nokia SROS series systems 5.0 Release."
::= { tmnxMplsGroups 16 }
tmnxMplsLspV5v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspRowStatus,
vRtrMplsLspLastChange,
vRtrMplsLspName,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspFromAddr,
vRtrMplsLspToAddr,
vRtrMplsLspType,
vRtrMplsLspOutSegIndx,
vRtrMplsLspRetryTimer,
vRtrMplsLspRetryLimit,
vRtrMplsLspMetric,
vRtrMplsLspDecrementTtl,
vRtrMplsLspCspf,
vRtrMplsLspFastReroute,
vRtrMplsLspFRHopLimit,
vRtrMplsLspFRBandwidth,
vRtrMplsLspClassOfService,
vRtrMplsLspSetupPriority,
vRtrMplsLspHoldPriority,
vRtrMplsLspRecord,
vRtrMplsLspPreference,
vRtrMplsLspBandwidth,
vRtrMplsLspBwProtect,
vRtrMplsLspHopLimit,
vRtrMplsLspNegotiatedMTU,
vRtrMplsLspRsvpResvStyle,
vRtrMplsLspRsvpAdspec,
vRtrMplsLspFRMethod,
vRtrMplsLspFRNodeProtect,
vRtrMplsLspAdminGroupInclude,
vRtrMplsLspAdminGroupExclude,
vRtrMplsLspAdaptive,
vRtrMplsLspInheritance,
vRtrMplsLspOptimizeTimer,
vRtrMplsLspOperFastReroute,
vRtrMplsLspFRObject,
vRtrMplsLspOctets,
vRtrMplsLspPackets,
vRtrMplsLspAge,
vRtrMplsLspTimeUp,
vRtrMplsLspTimeDown,
vRtrMplsLspPrimaryTimeUp,
vRtrMplsLspTransitions,
vRtrMplsLspLastTransition,
vRtrMplsLspPathChanges,
vRtrMplsLspLastPathChange,
vRtrMplsLspConfiguredPaths,
vRtrMplsLspStandbyPaths,
vRtrMplsLspOperationalPaths,
vRtrMplsLspHoldTimer
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS LSPs on
Nokia SROS series systems 5.0 Release."
::= { tmnxMplsGroups 17 }
tmnxMplsGlobalV6v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralLastChange,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralOperState,
vRtrMplsGeneralPropagateTtl,
vRtrMplsGeneralTE,
vRtrMplsGeneralNewLspIndex,
vRtrMplsGeneralOptimizeTimer,
vRtrMplsGeneralFRObject,
vRtrMplsGeneralResignalTimer,
vRtrMplsGeneralStaticLspOriginate,
vRtrMplsGeneralStaticLspTransit,
vRtrMplsGeneralStaticLspTerminate,
vRtrMplsGeneralDynamicLspOriginate,
vRtrMplsGeneralDynamicLspTransit,
vRtrMplsGeneralDynamicLspTerminate,
vRtrMplsGeneralDetourLspOriginate,
vRtrMplsGeneralDetourLspTransit,
vRtrMplsGeneralDetourLspTerminate,
vRtrMplsGeneralHoldTimer,
vRtrMplsGeneralDynamicBypass,
vRtrMplsGeneralNextResignal,
vRtrMplsGeneralOperDownReason,
vRtrMplsGeneralSrlgFrr,
vRtrMplsGeneralSrlgFrrStrict
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting general management of extended MPLS on
Nokia SROS series systems 6.0 Release."
::= { tmnxMplsGroups 18 }
tmnxMplsSrlgV6v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsSrlgGrpTableLastChanged,
vRtrMplsSrlgGrpRowStatus,
vRtrMplsSrlgGrpLastChanged,
vRtrMplsSrlgGrpValue,
vRtrMplsIfSrlgGrpTblLastChanged,
vRtrMplsIfSrlgGrpRowStatus,
vRtrMplsIfSrlgGrpLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of SRLG on Nokia 7xxx SR
series systems release 6.0."
::= { tmnxMplsGroups 19 }
tmnxMplsLspPathV6v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathSrlg,
vRtrMplsLspPathSrlgDisjoint
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
path mapping on Nokia SROS series systems."
::= { tmnxMplsGroups 20 }
tmnxMplsIfV6v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsIfTeMetric
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Te metric feature on
extended MPLS interfaces on 6.0 release Nokia SROS series systems."
::= { tmnxMplsGroups 21 }
tmnxMplsLspV6v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspCspfTeMetricEnabled
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Te metric feature
extended MPLS LSPs on 6.0 release Nokia SROS series systems."
::= { tmnxMplsGroups 22 }
tmnxMplsLspPathV6v1Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathTableSpinlock,
vRtrMplsLspPathRowStatus,
vRtrMplsLspPathLastChange,
vRtrMplsLspPathType,
vRtrMplsLspPathCos,
vRtrMplsLspPathProperties,
vRtrMplsLspPathBandwidth,
vRtrMplsLspPathBwProtect,
vRtrMplsLspPathState,
vRtrMplsLspPathPreference,
vRtrMplsLspPathCosSource,
vRtrMplsLspPathClassOfService,
vRtrMplsLspPathSetupPriority,
vRtrMplsLspPathHoldPriority,
vRtrMplsLspPathRecord,
vRtrMplsLspPathHopLimit,
vRtrMplsLspPathSharing,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathInheritance,
vRtrMplsLspPathLspId,
vRtrMplsLspPathRetryTimeRemaining,
vRtrMplsLspPathTunnelARHopListIndex,
vRtrMplsLspPathNegotiatedMTU,
vRtrMplsLspPathFailCode,
vRtrMplsLspPathFailNodeAddr,
vRtrMplsLspPathAdminGroupInclude,
vRtrMplsLspPathAdminGroupExclude,
vRtrMplsLspPathAdaptive,
vRtrMplsLspPathOptimizeTimer,
vRtrMplsLspPathNextOptimize,
vRtrMplsLspPathOperBandwidth,
vRtrMplsLspPathResignal,
vRtrMplsLspPathTunnelCRHopListIndex,
vRtrMplsLspPathOperMTU,
vRtrMplsLspPathRecordLabel,
vRtrMplsLspPathTimeUp,
vRtrMplsLspPathTimeDown,
vRtrMplsLspPathRetryAttempts,
vRtrMplsLspPathTransitionCount,
vRtrMplsLspPathCspfQueries,
vRtrMplsLspPathLastResigAttempt,
vRtrMplsLspPathMetric,
vRtrMplsLspPathLastMBBType,
vRtrMplsLspPathLastMBBEnd,
vRtrMplsLspPathLastMBBMetric,
vRtrMplsLspPathLastMBBState,
vRtrMplsLspPathMBBTypeInProg,
vRtrMplsLspPathMBBStarted,
vRtrMplsLspPathMBBNextRetry,
vRtrMplsLspPathMBBRetryAttempts,
vRtrMplsLspPathMBBFailCode,
vRtrMplsLspPathMBBFailNodeArType,
vRtrMplsLspPathMBBFailNodeAddr
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
path mapping on Nokia SROS series systems."
::= { tmnxMplsGroups 23 }
tmnxMplsObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathMBBState,
vRtrMplsFSGroupCost,
vRtrMplsFSGroupParamsRowStatus,
vRtrMplsFSGroupRowStatus
}
STATUS current
DESCRIPTION
"The group of obsolete objects which are no longer supported in MPLS on
6.0R4 release onwards on Nokia SROS series systems."
::= { tmnxMplsGroups 24 }
tmnxMplsLspV7v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspP2mpId,
vRtrMplsLspClassType,
vRtrMplsLspOperMetric,
vRtrMplsLspLdpOverRsvpInclude,
vRtrMplsLspLeastFill,
vRtrMplsLspVprnAutoBindInclude,
vRtrMplsLspConfP2mpInstances
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LSP in MPLS on
on Nokia SROS series systems 7.0 release."
::= { tmnxMplsGroups 25 }
tmnxMplsGlobalV7v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralNewP2mpInstIndex,
vRtrMplsGeneralS2lOriginate,
vRtrMplsGeneralS2lTransit,
vRtrMplsGeneralS2lTerminate,
vRtrMplsGeneralLeastFillMinThd,
vRtrMplsGenLeastFillReoptiThd,
vRtrMplsGeneralUseSrlgDB,
vRtrMplsInSegmentNumS2ls,
vRtrMplsOutSegmentNumS2ls,
vRtrMplsGeneralP2mpResigTimer,
vRtrMplsGeneralP2mpNextResignal,
vRtrMplsGeneralSecFastRetryTimer,
vRtrMplsGeneralStaticLspFRTimer
}
STATUS current
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 7.0 release."
::= { tmnxMplsGroups 26 }
tmnxMplsP2mpInstanceGroup OBJECT-GROUP
OBJECTS {
vRtrMplsP2mpInstTblLastChanged,
vRtrMplsP2mpInstRowStatus,
vRtrMplsP2mpInstLastChange,
vRtrMplsP2mpInstName,
vRtrMplsP2mpInstType,
vRtrMplsP2mpInstProperties,
vRtrMplsP2mpInstBandwidth,
vRtrMplsP2mpInstState,
vRtrMplsP2mpInstSetupPriority,
vRtrMplsP2mpInstHoldPriority,
vRtrMplsP2mpInstRecord,
vRtrMplsP2mpInstHopLimit,
vRtrMplsP2mpInstAdminState,
vRtrMplsP2mpInstOperState,
vRtrMplsP2mpInstInheritance,
vRtrMplsP2mpInstLspId,
vRtrMplsP2mpInstNegotiatedMTU,
vRtrMplsP2mpInstFailCode,
vRtrMplsP2mpInstFailNodeArType,
vRtrMplsP2mpInstFailNodeAddr,
vRtrMplsP2mpInstAdminGrpInclude,
vRtrMplsP2mpInstAdminGrpExclude,
vRtrMplsP2mpInstAdaptive,
vRtrMplsP2mpInstOperBandwidth,
vRtrMplsP2mpInstResignal,
vRtrMplsP2mpInstOperMTU,
vRtrMplsP2mpInstRecordLabel,
vRtrMplsP2mpInstLastResigAttpt,
vRtrMplsP2mpInstMetric,
vRtrMplsP2mpInstLastMBBType,
vRtrMplsP2mpInstLastMBBEnd,
vRtrMplsP2mpInstLastMBBMetric,
vRtrMplsP2mpInstLastMBBState,
vRtrMplsP2mpInstMBBTypeInProg,
vRtrMplsP2mpInstMBBStarted,
vRtrMplsP2mpInstMBBNextRetry,
vRtrMplsP2mpInstMBBRetryAttpts,
vRtrMplsP2mpInstMBBFailCode,
vRtrMplsP2mpInstMBBFailNodeType,
vRtrMplsP2mpInstMBBFailNodeAddr,
vRtrMplsP2mpInstStatS2lChanges,
vRtrMplsP2mpInstStatLastS2lChange,
vRtrMplsP2mpInstStatConfiguredS2ls,
vRtrMplsP2mpInstStatOperationalS2ls,
vRtrMplsP2mpInstStatLastS2lTimeUp,
vRtrMplsP2mpInstStatLastS2lTimeDown,
vRtrMplsP2mpInstStatTimeUp,
vRtrMplsP2mpInstStatTimeDown,
vRtrMplsP2mpInstStatTransitions,
vRtrMplsP2mpInstStatLastTrans
}
STATUS current
DESCRIPTION
"The group of all P2MP instance related objects supporting management
of P2MP feature in MPLS on Nokia SROS series systems 7.0 release."
::= { tmnxMplsGroups 27 }
tmnxMplsP2mpS2lGroup OBJECT-GROUP
OBJECTS {
vRtrMplsS2lSubLspTblLastChanged,
vRtrMplsS2lSubLspRowStatus,
vRtrMplsS2lSubLspLastChange,
vRtrMplsS2lSubLspType,
vRtrMplsS2lSubLspProperties,
vRtrMplsS2lSubLspState,
vRtrMplsS2lSubLspAdminState,
vRtrMplsS2lSubLspOperState,
vRtrMplsS2lSubGroupId,
vRtrMplsS2lSubLspId,
vRtrMplsS2lSubLspRetryTimeRemain,
vRtrMplsS2lSubLspNegotiatedMTU,
vRtrMplsS2lSubLspFailCode,
vRtrMplsS2lSubLspFailNodeArType,
vRtrMplsS2lSubLspFailNodeAddr,
vRtrMplsS2lSubLspOperBandwidth,
vRtrMplsS2lSubLspOperMTU,
vRtrMplsS2lSubLspLastResigAttpt,
vRtrMplsS2lSubLspLastMBBType,
vRtrMplsS2lSubLspLastMBBEnd,
vRtrMplsS2lSubLspLastMBBMetric,
vRtrMplsS2lSubLspLastMBBState,
vRtrMplsS2lSubLspMBBTypeInProg,
vRtrMplsS2lSubLspMBBStarted,
vRtrMplsS2lSubLspMBBNextRetry,
vRtrMplsS2lSubLspMBBRetryAttpts,
vRtrMplsS2lSubLspMBBFailCode,
vRtrMplsS2lSubLspMBBFailNodeType,
vRtrMplsS2lSubLspMBBFailNodeAddr,
vRtrMplsS2lSubLspUpTime,
vRtrMplsS2lSubLspDownTime,
vRtrMplsS2lSubLspTimeUp,
vRtrMplsS2lSubLspTimeDown,
vRtrMplsS2lSubLspRetryAttempts,
vRtrMplsS2lSubLspTransitionCount,
vRtrMplsS2lSubLspCspfQueries,
vRtrMplsS2lSubLspTunARHopLtIndex,
vRtrMplsS2lSubLspTunCRHopLtIndex
}
STATUS current
DESCRIPTION
"The group of all S2L sub-LSP related objects supporting management of
P2MP feature in MPLS on Nokia SROS series systems 7.0 release."
::= { tmnxMplsGroups 28 }
tmnxMplsNotifyObjsV7v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsP2mpInstNotifIndex,
vRtrMplsS2lSubLspNtDstAddrType,
vRtrMplsS2lSubLspNtDstAddr,
vRtrMplsP2mpInstNotifReasonCode,
vRtrMplsLspPathCongChgPercent
}
STATUS current
DESCRIPTION
"The group of notification objects supporting extended MPLS
notifications on Nokia SROS series systems 7.0 release."
::= { tmnxMplsGroups 29 }
tmnxMplsNotificationV7v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsP2mpInstanceUp,
vRtrMplsP2mpInstanceDown,
vRtrMplsS2lSubLspUp,
vRtrMplsS2lSubLspDown,
vRtrMplsS2lSubLspRerouted,
vRtrMplsS2lSubLspResignaled,
vRtrMplsLspPathSoftPreempted,
vRtrMplsLspPathLstFillReoptElig,
vRtrMplsP2mpInstanceResignaled,
vRtrMplsResignalTimerExpired
}
STATUS current
DESCRIPTION
"The group of notifications supporting the extended MPLS feature on
Nokia SROS series systems 7.0 Release."
::= { tmnxMplsGroups 30 }
tmnxMplsLspPathV7v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathClassType,
vRtrMplsLspPathOperMetric,
vRtrMplsLspPathResignalEligible,
vRtrMplsLspPathIsFastRetry
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
path mapping on Nokia SROS series systems."
::= { tmnxMplsGroups 31 }
tmnxMplsSrlgV7v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsSrlgDBRtrIdRowStatus,
vRtrMplsSrlgDBRtrIdAdminState,
vRtrMplsSrlgDBRtrIdLastChanged,
vRtrMplsSrlgDBRtrIdTblLastChg,
vRtrMplsSrlgDBIfRowStatus,
vRtrMplsSrlgDBIfLastChanged,
vRtrMplsSrlgDBIfTblLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SRLG on Nokia SROS
series systems release 7.0."
::= { tmnxMplsGroups 32 }
tmnxMplsLspStatsV7v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspStatsAccntingPolicy,
vRtrMplsLspStatsCollectStats,
vRtrMplsLspStatsLastChanged,
vRtrMplsLspStatsRowStatus,
vRtrMplsLspStatsTblLastChgd,
vRtrMplsLspStatsAdminState,
vRtrMplsInProfileOctetsFc0,
vRtrMplsInProfileOctetsFc0High32,
vRtrMplsInProfileOctetsFc0Low32,
vRtrMplsInProfileOctetsFc1,
vRtrMplsInProfileOctetsFc1High32,
vRtrMplsInProfileOctetsFc1Low32,
vRtrMplsInProfileOctetsFc2,
vRtrMplsInProfileOctetsFc2High32,
vRtrMplsInProfileOctetsFc2Low32,
vRtrMplsInProfileOctetsFc3,
vRtrMplsInProfileOctetsFc3High32,
vRtrMplsInProfileOctetsFc3Low32,
vRtrMplsInProfileOctetsFc4,
vRtrMplsInProfileOctetsFc4High32,
vRtrMplsInProfileOctetsFc4Low32,
vRtrMplsInProfileOctetsFc5,
vRtrMplsInProfileOctetsFc5High32,
vRtrMplsInProfileOctetsFc5Low32,
vRtrMplsInProfileOctetsFc6,
vRtrMplsInProfileOctetsFc6High32,
vRtrMplsInProfileOctetsFc6Low32,
vRtrMplsInProfileOctetsFc7,
vRtrMplsInProfileOctetsFc7High32,
vRtrMplsInProfileOctetsFc7Low32,
vRtrMplsInProfilePktsFc0,
vRtrMplsInProfilePktsFc0High32,
vRtrMplsInProfilePktsFc0Low32,
vRtrMplsInProfilePktsFc1,
vRtrMplsInProfilePktsFc1High32,
vRtrMplsInProfilePktsFc1Low32,
vRtrMplsInProfilePktsFc2,
vRtrMplsInProfilePktsFc2High32,
vRtrMplsInProfilePktsFc2Low32,
vRtrMplsInProfilePktsFc3,
vRtrMplsInProfilePktsFc3High32,
vRtrMplsInProfilePktsFc3Low32,
vRtrMplsInProfilePktsFc4,
vRtrMplsInProfilePktsFc4High32,
vRtrMplsInProfilePktsFc4Low32,
vRtrMplsInProfilePktsFc5,
vRtrMplsInProfilePktsFc5High32,
vRtrMplsInProfilePktsFc5Low32,
vRtrMplsInProfilePktsFc6,
vRtrMplsInProfilePktsFc6High32,
vRtrMplsInProfilePktsFc6Low32,
vRtrMplsInProfilePktsFc7,
vRtrMplsInProfilePktsFc7High32,
vRtrMplsInProfilePktsFc7Low32,
vRtrMplsOutOfProfOctetsFc0,
vRtrMplsOutOfProfOctetsFc0High32,
vRtrMplsOutOfProfOctetsFc0Low32,
vRtrMplsOutOfProfOctetsFc1,
vRtrMplsOutOfProfOctetsFc1High32,
vRtrMplsOutOfProfOctetsFc1Low32,
vRtrMplsOutOfProfOctetsFc2,
vRtrMplsOutOfProfOctetsFc2High32,
vRtrMplsOutOfProfOctetsFc2Low32,
vRtrMplsOutOfProfOctetsFc3,
vRtrMplsOutOfProfOctetsFc3High32,
vRtrMplsOutOfProfOctetsFc3Low32,
vRtrMplsOutOfProfOctetsFc4,
vRtrMplsOutOfProfOctetsFc4High32,
vRtrMplsOutOfProfOctetsFc4Low32,
vRtrMplsOutOfProfOctetsFc5,
vRtrMplsOutOfProfOctetsFc5High32,
vRtrMplsOutOfProfOctetsFc5Low32,
vRtrMplsOutOfProfOctetsFc6,
vRtrMplsOutOfProfOctetsFc6High32,
vRtrMplsOutOfProfOctetsFc6Low32,
vRtrMplsOutOfProfOctetsFc7,
vRtrMplsOutOfProfOctetsFc7High32,
vRtrMplsOutOfProfOctetsFc7Low32,
vRtrMplsOutOfProfPktsFc0,
vRtrMplsOutOfProfPktsFc0High32,
vRtrMplsOutOfProfPktsFc0Low32,
vRtrMplsOutOfProfPktsFc1,
vRtrMplsOutOfProfPktsFc1High32,
vRtrMplsOutOfProfPktsFc1Low32,
vRtrMplsOutOfProfPktsFc2,
vRtrMplsOutOfProfPktsFc2High32,
vRtrMplsOutOfProfPktsFc2Low32,
vRtrMplsOutOfProfPktsFc3,
vRtrMplsOutOfProfPktsFc3High32,
vRtrMplsOutOfProfPktsFc3Low32,
vRtrMplsOutOfProfPktsFc4,
vRtrMplsOutOfProfPktsFc4High32,
vRtrMplsOutOfProfPktsFc4Low32,
vRtrMplsOutOfProfPktsFc5,
vRtrMplsOutOfProfPktsFc5High32,
vRtrMplsOutOfProfPktsFc5Low32,
vRtrMplsOutOfProfPktsFc6,
vRtrMplsOutOfProfPktsFc6High32,
vRtrMplsOutOfProfPktsFc6Low32,
vRtrMplsOutOfProfPktsFc7,
vRtrMplsOutOfProfPktsFc7High32,
vRtrMplsOutOfProfPktsFc7Low32,
vRtrMplsLspStatsPSBMatch,
vRtrMplsGeneralLspEgrStatCount,
vRtrMplsGeneralLspIgrStatCount
}
STATUS current
DESCRIPTION
"The group of objects supporting management of egress/ingress
statistics on Nokia SROS series systems release 7.0."
::= { tmnxMplsGroups 33 }
tmnxMplsLspV8v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspMainCTRetryLimit,
vRtrMplsLspIgpShortcut
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LSP in MPLS on
Nokia SROS series systems 8.0 release."
::= { tmnxMplsGroups 34 }
tmnxMplsLspPathV8v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathBackupCT,
vRtrMplsLspPathMainCTRetryRem,
vRtrMplsLspPathOperCT,
vRtrMplsLspPathNewPathIndex,
vRtrMplsLspPathMBBMainCTRetryRem
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
path mapping on Nokia SROS series systems 8.0 release."
::= { tmnxMplsGroups 35 }
tmnxMplsNotifyObjsV8v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathMbbStatus,
vRtrMplsLspPathMbbReasonCode
}
STATUS current
DESCRIPTION
"The group of notification objects supporting extended MPLS
notifications on Nokia SROS series systems 8.0 release."
::= { tmnxMplsGroups 36 }
tmnxMplsNotificationV8v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsLspPathMbbStatusEvent
}
STATUS current
DESCRIPTION
"The group of notifications supporting the extended MPLS feature on
Nokia SROS series systems 8.0 Release."
::= { tmnxMplsGroups 37 }
tmnxMplsGlobalV8v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralShortTTLPropLocal,
vRtrMplsGeneralShortTTLPropTrans,
vRtrMplsGeneralAutoBWDefSampMul,
vRtrMplsGeneralAutoBWDefAdjMul,
vRtrMplsGeneralExpBackoffRetry
}
STATUS current
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 8.0 release."
::= { tmnxMplsGroups 38 }
tmnxMplsLspTemplateV8v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspTemplateTblLastChgd,
vRtrMplsLspTemplateRowStatus,
vRtrMplsLspTemplateLastChanged,
vRtrMplsLspTemplateAdminState,
vRtrMplsLspTemplateType,
vRtrMplsLspTemplateAdaptive,
vRtrMplsLspTemplateBandwidth,
vRtrMplsLspTemplateCspf,
vRtrMplsLspTemplateDefaultPath,
vRtrMplsLspTemplateAdmGrpIncl,
vRtrMplsLspTemplateAdmGrpExcl,
vRtrMplsLspTemplateFastReroute,
vRtrMplsLspTemplateFRMethod,
vRtrMplsLspTemplateFRHopLimit,
vRtrMplsLspTemplateHopLimit,
vRtrMplsLspTemplateRecord,
vRtrMplsLspTemplateRecordLabel,
vRtrMplsLspTemplateRetryLimit,
vRtrMplsLspTemplateRetryTimer,
vRtrMplsLspTemplateCspfTeMetric,
vRtrMplsLspOriginTemplate,
vRtrMplsLspTemplateLspCount,
vRtrMplsLspTemplateMvpnRefCount
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of LSP Templates in MPLS on
Nokia SROS series systems 8.0 release."
::= { tmnxMplsGroups 39 }
tmnxMplsLspAutoBWV8v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspAutoBandwidth,
vRtrMplsLspAutoBWTableLastChg,
vRtrMplsLspAutoBWLastChange,
vRtrMplsLspAutoBWAdjDNPercent,
vRtrMplsLspAutoBWAdjDNMbps,
vRtrMplsLspAutoBWAdjMultiplier,
vRtrMplsLspAutoBWAdjUPPercent,
vRtrMplsLspAutoBWAdjUPMbps,
vRtrMplsLspAutoBWMaxBW,
vRtrMplsLspAutoBWMinBW,
vRtrMplsLspAutoBWMonitorBW,
vRtrMplsLspAutoBWOverFlow,
vRtrMplsLspAutoBWOvrFlwThreshold,
vRtrMplsLspAutoBWOvrFlwBW,
vRtrMplsLspAutoBWSampMultiplier,
vRtrMplsLspAutoBWSampTime,
vRtrMplsLspAutoBWLastAdj,
vRtrMplsLspAutoBWLastAdjCause,
vRtrMplsLspAutoBWNextAdj,
vRtrMplsLspAutoBWMaxAvgRate,
vRtrMplsLspAutoBWLastAvgRate,
vRtrMplsLspAutoBWInheritance,
vRtrMplsLspAutoBWCurrentBW,
vRtrMplsLspAutoBWAdjTime,
vRtrMplsLspAutoBWOvrFlwCount,
vRtrMplsLspAutoBWSampCount,
vRtrMplsLspAutoBWAdjCount,
vRtrMplsLspAutoBWOperState,
vRtrMplsLspAutoBWSampInterval,
vRtrMplsLspPathSigBWMBBInProg,
vRtrMplsLspPathSigBWLastMBB
}
STATUS current
DESCRIPTION
"The group of all objects supporting management of Auto-Bandwidth in
MPLS on Nokia SROS series systems 8.0 release."
::= { tmnxMplsGroups 40 }
tmnxMplsGlobalV9v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralCspfOnLooseHop
}
STATUS current
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 9.0 release."
::= { tmnxMplsGroups 41 }
tmnxMplsLspV9v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspCspfToFirstLoose,
vRtrMplsLspPropAdminGroup
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of extended LSP in MPLS on
Nokia SROS series systems 9.0 release."
::= { tmnxMplsGroups 42 }
tmnxMplsLspV9v0R4Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspBgpShortcut,
vRtrMplsLspBgpTransportTunnel,
vRtrMplsLspSwitchStbyPath,
vRtrMplsLspSwitchStbyPathIndex,
vRtrMplsLspSwitchStbyPathForce,
vRtrMplsGeneralP2PMaxByPassAssoc,
vRtrMplsLspExcludeNodeAddr,
vRtrMplsLspExcludeNodeAddrType
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended LSP in MPLS on
Nokia SROS series systems 9.0R4 release."
::= { tmnxMplsGroups 43 }
tmnxMplsNotifyObjsV9v0R4Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspSwitchStbyReasonCode,
vRtrMplsLspOldTunnelIndex
}
STATUS current
DESCRIPTION
"The group of notification objects supporting extended MPLS
notifications on Nokia SROS series systems 9.0.R4 release."
::= { tmnxMplsGroups 44 }
tmnxMplsNotifV9v0R4Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsLspSwitchStbyFailure,
vRtrMplsLspActivePathChanged
}
STATUS current
DESCRIPTION
"The group of notifications supporting the extended MPLS feature on
Nokia SROS series systems 9.0.R4 Release."
::= { tmnxMplsGroups 45 }
tmnxMplsLspPathV9v0R4Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathActiveByManual
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS LSP to
path mapping on Nokia SROS series systems 9.0.R4 release."
::= { tmnxMplsGroups 46 }
tmnxMplsGlobalV10v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGenP2pActPathFastRetry,
vRtrMplsGenP2mpS2lFastRetry,
vRtrMplsS2lSubLspIsFastRetry,
vRtrMplsLspPathTimeoutIn,
vRtrMplsLspPathMBBTimeoutIn,
vRtrMplsS2lSubLspTimeoutIn,
vRtrMplsS2lSubLspMBBTimeoutIn,
vRtrMplsLspPathOperSetupPriority,
vRtrMplsLspPathOperHoldPriority,
vRtrMplsLspPathOperRecord,
vRtrMplsLspPathOperRecordLabel,
vRtrMplsLspPathOperHopLimit,
vRtrMplsLspPathOperAdminGrpIncl,
vRtrMplsLspPathOperAdminGrExcld,
vRtrMplsLspPathOperCspf,
vRtrMplsLspPathOperCspfToFrstLs,
vRtrMplsLspPathOperLeastFill,
vRtrMplsLspPathOperRsvpAdspec,
vRtrMplsLspPathOperFRNodeProtect,
vRtrMplsLspPathOperPropAdminGrp,
vRtrMplsLspPathOperFRHopLimit,
vRtrMplsGenLspInitRetryTimeout,
vRtrMplsLspIgpShortcutLfaType,
vRtrMplsLoggerEventBundling,
vRtrMplsGenIssuMplsLockdown
}
STATUS obsolete
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 10.0 release."
::= { tmnxMplsGroups 47 }
tmnxMplsTpGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspToAddrType,
vRtrMplsLspFromAddrType,
vRtrMplsLspToNodeId,
vRtrMplsLspFromNodeId,
vRtrMplsLspDestGlobalId,
vRtrMplsLspDestTunnelNum,
vRtrMplsGenMplsTpLspOriginate,
vRtrMplsGenMplsTpLspTransit,
vRtrMplsGenMplsTpLspTerminate,
vRtrMplsGenMplsTpOrigPathInst,
vRtrMplsGenMplsTpTranPathInst,
vRtrMplsGenMplsTpTermPathInst
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the MPLS-TP feature on
Nokia SROS series systems."
::= { tmnxMplsGroups 48 }
tmnxMplsNotifyObjsV10v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsXCNotifRednIndicesBitMap,
vRtrMplsXCNotifyRednBundlingType,
vRtrMplsXCNotifyRednNumOfBitsSet,
vRtrMplsXCNotifyRednStartIndex,
vRtrMplsXCNotifyRednEndIndex
}
STATUS current
DESCRIPTION
"The group of notification objects supporting extended MPLS
notifications on Nokia SROS series systems 10.0 release."
::= { tmnxMplsGroups 49 }
tmnxMplsNotifyV10v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsXCBundleChange
}
STATUS current
DESCRIPTION
"The group of notifications supporting the extended MPLS feature on
Nokia SROS series systems 10.0 Release."
::= { tmnxMplsGroups 50 }
tmnxMplsFRAdminGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGenFRAdminGroup,
vRtrMplsLspTemplateFRPropAdmGrp,
vRtrMplsLspFRPropAdminGroup,
vRtrMplsTunnelCHopEgressAdmGrp,
vRtrMplsLspPathOperFRPropAdmGrp
}
STATUS current
DESCRIPTION
"The group of objects supporting administrative groups for Fast Reroute"
::= { tmnxMplsGroups 51 }
tmnxMplsGlobalV11v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathOperInterArea,
vRtrMplsTunnelCHopUnnumIfID,
vRtrMplsTunnelCHopRtrID,
vRtrMplsTunnelCHopIsABR,
vRtrMplsTunnelARHopUnnumIfID,
vRtrMplsLspRowStatus,
vRtrMplsLspLastChange,
vRtrMplsLspName,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspFromAddr,
vRtrMplsLspToAddr,
vRtrMplsLspType,
vRtrMplsLspOutSegIndx,
vRtrMplsLspRetryTimer,
vRtrMplsLspRetryLimit,
vRtrMplsLspMetric,
vRtrMplsLspCspf,
vRtrMplsLspFastReroute,
vRtrMplsLspFRHopLimit,
vRtrMplsLspFRBandwidth,
vRtrMplsLspSetupPriority,
vRtrMplsLspHoldPriority,
vRtrMplsLspRecord,
vRtrMplsLspBandwidth,
vRtrMplsLspHopLimit,
vRtrMplsLspNegotiatedMTU,
vRtrMplsLspRsvpResvStyle,
vRtrMplsLspRsvpAdspec,
vRtrMplsLspFRMethod,
vRtrMplsLspFRNodeProtect,
vRtrMplsLspAdminGroupInclude,
vRtrMplsLspAdminGroupExclude,
vRtrMplsLspAdaptive,
vRtrMplsLspInheritance,
vRtrMplsLspOptimizeTimer,
vRtrMplsLspOperFastReroute,
vRtrMplsLspFRObject,
vRtrMplsLspOctets,
vRtrMplsLspPackets,
vRtrMplsLspAge,
vRtrMplsLspTimeUp,
vRtrMplsLspTimeDown,
vRtrMplsLspPrimaryTimeUp,
vRtrMplsLspTransitions,
vRtrMplsLspLastTransition,
vRtrMplsLspPathChanges,
vRtrMplsLspLastPathChange,
vRtrMplsLspConfiguredPaths,
vRtrMplsLspStandbyPaths,
vRtrMplsLspOperationalPaths,
vRtrMplsLspHoldTimer,
vRtrMplsLspPathTableSpinlock,
vRtrMplsLspPathRowStatus,
vRtrMplsLspPathLastChange,
vRtrMplsLspPathType,
vRtrMplsLspPathProperties,
vRtrMplsLspPathBandwidth,
vRtrMplsLspPathState,
vRtrMplsLspPathPreference,
vRtrMplsLspPathSetupPriority,
vRtrMplsLspPathHoldPriority,
vRtrMplsLspPathRecord,
vRtrMplsLspPathHopLimit,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathInheritance,
vRtrMplsLspPathLspId,
vRtrMplsLspPathRetryTimeRemaining,
vRtrMplsLspPathTunnelARHopListIndex,
vRtrMplsLspPathNegotiatedMTU,
vRtrMplsLspPathFailCode,
vRtrMplsLspPathFailNodeAddr,
vRtrMplsLspPathAdminGroupInclude,
vRtrMplsLspPathAdminGroupExclude,
vRtrMplsLspPathAdaptive,
vRtrMplsLspPathOptimizeTimer,
vRtrMplsLspPathNextOptimize,
vRtrMplsLspPathOperBandwidth,
vRtrMplsLspPathResignal,
vRtrMplsLspPathTunnelCRHopListIndex,
vRtrMplsLspPathOperMTU,
vRtrMplsLspPathRecordLabel,
vRtrMplsLspPathTimeUp,
vRtrMplsLspPathTimeDown,
vRtrMplsLspPathRetryAttempts,
vRtrMplsLspPathTransitionCount,
vRtrMplsLspPathCspfQueries,
vRtrMplsLspPathLastResigAttempt,
vRtrMplsLspPathMetric,
vRtrMplsLspPathLastMBBType,
vRtrMplsLspPathLastMBBEnd,
vRtrMplsLspPathLastMBBMetric,
vRtrMplsLspPathLastMBBState,
vRtrMplsLspPathMBBTypeInProg,
vRtrMplsLspPathMBBStarted,
vRtrMplsLspPathMBBNextRetry,
vRtrMplsLspPathMBBRetryAttempts,
vRtrMplsLspPathMBBFailCode,
vRtrMplsLspPathMBBFailNodeArType,
vRtrMplsLspPathMBBFailNodeAddr,
vRtrMplsGeneralLastChange,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralOperState,
vRtrMplsGeneralNewLspIndex,
vRtrMplsGeneralOptimizeTimer,
vRtrMplsGeneralFRObject,
vRtrMplsGeneralResignalTimer,
vRtrMplsGeneralStaticLspOriginate,
vRtrMplsGeneralStaticLspTransit,
vRtrMplsGeneralStaticLspTerminate,
vRtrMplsGeneralDynamicLspOriginate,
vRtrMplsGeneralDynamicLspTransit,
vRtrMplsGeneralDynamicLspTerminate,
vRtrMplsGeneralDetourLspOriginate,
vRtrMplsGeneralDetourLspTransit,
vRtrMplsGeneralDetourLspTerminate,
vRtrMplsGeneralHoldTimer,
vRtrMplsGeneralDynamicBypass,
vRtrMplsGeneralNextResignal,
vRtrMplsGeneralOperDownReason,
vRtrMplsGeneralSrlgFrr,
vRtrMplsGeneralSrlgFrrStrict,
vRtrMplsLspTemplatePropAdmGrp,
vRtrMplsLabelMaxStaticLspLabels,
vRtrMplsLabelMaxStaticSvcLabels,
vRtrMplsS2lSubLspInterArea,
vRtrMplsGenP2pActPathFastRetry,
vRtrMplsGenP2mpS2lFastRetry,
vRtrMplsS2lSubLspIsFastRetry,
vRtrMplsLspPathTimeoutIn,
vRtrMplsLspPathMBBTimeoutIn,
vRtrMplsS2lSubLspTimeoutIn,
vRtrMplsS2lSubLspMBBTimeoutIn,
vRtrMplsLspPathOperSetupPriority,
vRtrMplsLspPathOperHoldPriority,
vRtrMplsLspPathOperRecord,
vRtrMplsLspPathOperRecordLabel,
vRtrMplsLspPathOperHopLimit,
vRtrMplsLspPathOperAdminGrpIncl,
vRtrMplsLspPathOperAdminGrExcld,
vRtrMplsLspPathOperCspf,
vRtrMplsLspPathOperLeastFill,
vRtrMplsLspPathOperRsvpAdspec,
vRtrMplsLspPathOperFRNodeProtect,
vRtrMplsLspPathOperPropAdminGrp,
vRtrMplsLspPathOperFRHopLimit,
vRtrMplsGenLspInitRetryTimeout,
vRtrMplsLspIgpShortcutLfaType,
vRtrMplsLoggerEventBundling,
vRtrMplsGenIssuMplsLockdown,
vRtrMplsLspPropAdminGroup,
vRtrMplsLspIgpShortcutRelOffset
}
STATUS obsolete
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 11.0 release."
::= { tmnxMplsGroups 52 }
tmnxMplsV11v0ObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspDecrementTtl,
vRtrMplsLspClassOfService,
vRtrMplsLspPathCos,
vRtrMplsLspPathCosSource,
vRtrMplsLspPathClassOfService,
vRtrMplsLspBwProtect,
vRtrMplsLspPathBwProtect,
vRtrMplsLspPreference,
vRtrMplsLspPathSharing,
vRtrMplsGeneralPropagateTtl,
vRtrMplsGeneralTE,
vRtrMplsLspPathOperCspfToFrstLs,
vRtrMplsLspCspfToFirstLoose
}
STATUS current
DESCRIPTION
"The group of obsolete objects which are no longer supported in MPLS
11.0R1 release onwards on Nokia SROS series systems."
::= { tmnxMplsGroups 53 }
tmnxMplsLspTemplateGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTemplateBgpShortcut,
vRtrMplsLspTemplateIgpShortcut,
vRtrMplsLspTemplateLdpOverRsvp,
vRtrMplsLspTemplateLeastFill,
vRtrMplsLspTemplateMetric,
vRtrMplsLspTemplateSetupPriority,
vRtrMplsLspTemplateHoldPriority,
vRtrMplsLspTemplateVprnAutoBind,
vRtrMplsLspTempIgpSCutLfaType,
vRtrMplsLspTempIgpSCutRelOffset,
vRtrMplsLspTempAutoBandwidth,
vRtrMplsLspTempFRNodeProtect,
vRtrMplsLspTempAutoBWTblLastChg,
vRtrMplsLspTempAutoBWLastChg,
vRtrMplsLspTempAutoBWAdjDNPer,
vRtrMplsLspTempAutoBWAdjDNMbps,
vRtrMplsLspTempAutoBWAdjUPPer,
vRtrMplsLspTempAutoBWAdjUPMbps,
vRtrMplsLspTempAutoBWMaxBW,
vRtrMplsLspTempAutoBWMinBW,
vRtrMplsLspTempAutoBWMntrBW,
vRtrMplsLspTempAutoBWAdjMult,
vRtrMplsLspTempAutoBWOverFlow,
vRtrMplsLspTempAutoBWOvrFlwThr,
vRtrMplsLspTempAutoBWOvrFlwBW,
vRtrMplsLspTempAutoBWSampMult,
vRtrMplsLspTempAutoBWSampTime,
vRtrMplsLspTempAutoBWInherit,
vRtrMplsLspTemplateEgrStats,
vRtrMplsLspTempCollectStats,
vRtrMplsLspTempAccntingPolicy,
vRtrMplsTemplPlcyBindTblLastChg,
vRtrMplsLspTemplPlcyBindLastChg,
vRtrMplsLspTemplPlcyBindRowStat,
vRtrMplsLspTemplPlcyBind1,
vRtrMplsLspTemplPlcyBind2,
vRtrMplsLspTemplPlcyBind3,
vRtrMplsLspTemplPlcyBind4,
vRtrMplsLspTemplPlcyBind5,
vRtrMplsLspTemplPlcyBindOneHop,
vRtrMplsLspTempAutoBWBeWeight,
vRtrMplsLspTempAutoBWL2Weight,
vRtrMplsLspTempAutoBWAfWeight,
vRtrMplsLspTempAutoBWL1Weight,
vRtrMplsLspTempAutoBWH2Weight,
vRtrMplsLspTempAutoBWEfWeight,
vRtrMplsLspTempAutoBWH1Weight,
vRtrMplsLspTempAutoBWNcWeight,
vRtrMplsLspTemplateFromAddrType,
vRtrMplsLspTemplateFromAddr,
vRtrMplsLspTemplateClassType,
vRtrMplsLspTempBkupClassType,
vRtrMplsLspTempBgpTransportTunn,
vRtrMplsLspTempMainCTRetryLimit,
vRtrMplsLspTemplateRsvpAdspec
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Lsp Template."
::= { tmnxMplsGroups 54 }
tmnxMplsNotifyV11v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsLblRangeModify
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the extended MPLS feature on
Nokia SROS series systems 11.0 Release."
::= { tmnxMplsGroups 55 }
tmnxMplsLspAutoBWFcWtGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspAutoBWBeWeight,
vRtrMplsLspAutoBWL2Weight,
vRtrMplsLspAutoBWAfWeight,
vRtrMplsLspAutoBWL1Weight,
vRtrMplsLspAutoBWH2Weight,
vRtrMplsLspAutoBWEfWeight,
vRtrMplsLspAutoBWH1Weight,
vRtrMplsLspAutoBWNcWeight
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Forwarding Class
Weights for Lsp Auto Bandwidth on Nokia SROS series systems."
::= { tmnxMplsGroups 56 }
tmnxMplsGlobalV11v0R4Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspStatsTpOnly,
vRtrMplsGeneralMeshP2pOriginate,
vRtrMplsGeneralOneHopP2pOrigin,
vRtrMplsGenRetryOnIgpOverload
}
STATUS current
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 11.0 R4 release."
::= { tmnxMplsGroups 57 }
tmnxMplsV12v0ObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspBandwidth
}
STATUS current
DESCRIPTION
"The group of obsolete objects which are no longer supported in MPLS
12.0R1 release onwards on Nokia SROS series systems."
::= { tmnxMplsGroups 58 }
tmnxMplsNotifyObjsIgpOverload OBJECT-GROUP
OBJECTS {
vRtrMplsIgpOverloadRtrAddrType,
vRtrMplsIgpOverloadRtrAddr,
vRtrMplsIgpOverloadIgpType
}
STATUS current
DESCRIPTION
"The group of notification objects supporting IGP shortcut notification
feature on Nokia SROS series systems 11.0 Release."
::= { tmnxMplsGroups 59 }
tmnxMplsIgpOverloadNotify NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsNodeInIgpOverload
}
STATUS current
DESCRIPTION
"The group of notifications supporting IGP shortcut notification
feature on Nokia SROS series systems 11.0 Release."
::= { tmnxMplsGroups 60 }
tmnxMplsLspTempInStatsGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempInStatTblLstChg,
vRtrMplsLspTempInStatRowStatus,
vRtrMplsLspTempInStatLastChanged,
vRtrMplsLspTempInStatCollectStat,
vRtrMplsLspTempInStatAccntPolicy,
vRtrMplsLspTempInStatAdminState,
vRtrMplsLspTempInStatMaxStats,
vRtrMplsLspStatsLspType,
vRtrMplsLspTempInStatTotlSession,
vRtrMplsLspStatsEgrIndexUnAvail
}
STATUS current
DESCRIPTION
"The group of notification supporting MPLS Ingress Statistics for
Template Based Label Switched Path (LSP) on Nokia SROS series systems
12.0 Release."
::= { tmnxMplsGroups 61 }
tmnxMplsAutoBwUnderflowGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspAutoBWUnderFlow,
vRtrMplsLspAutoBWUndFlwThreshold,
vRtrMplsLspAutoBWUndFlwBW,
vRtrMplsLspAutoBWUndFlwCount,
vRtrMplsLspAutoBWMaxUndFlwBw,
vRtrMplsLspTempAutoBWUnderFlow,
vRtrMplsLspTempAutoBWUndFlwThr,
vRtrMplsLspTempAutoBWUndFlwBW
}
STATUS current
DESCRIPTION
"The group of notification supporting MPLS Auto-Bandwidth underflow on
Nokia SROS series systems 12.0 Release."
::= { tmnxMplsGroups 62 }
tmnxMplsBgpLabelRetentionGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLabelBgpLabelsHoldTimer
}
STATUS current
DESCRIPTION
"The group of notification supporting MPLS BGP Label Retention on Nokia
SROS series systems 12.0 Release."
::= { tmnxMplsGroups 63 }
tmnxMplsGlobalV12v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelCHopUnnumIfID,
vRtrMplsTunnelCHopRtrID,
vRtrMplsTunnelCHopIsABR,
vRtrMplsTunnelARHopUnnumIfID,
vRtrMplsLspTemplatePropAdmGrp,
vRtrMplsLabelMaxStaticLspLabels,
vRtrMplsLabelMaxStaticSvcLabels,
vRtrMplsS2lSubLspInterArea,
vRtrMplsS2lSubLspIsFastRetry,
vRtrMplsS2lSubLspTimeoutIn,
vRtrMplsS2lSubLspMBBTimeoutIn,
vRtrMplsLoggerEventBundling,
vRtrMplsLspIgpShortcutRelOffset
}
STATUS obsolete
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 12.0 release."
::= { tmnxMplsGroups 64 }
tmnxMplsBypassOptGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralBypassResigTimer,
vRtrMplsGenBypassNextResignal
}
STATUS current
DESCRIPTION
"The group of objects supporting MPLS Bypass Optimization on Nokia SROS
series systems 12.0 Release."
::= { tmnxMplsGroups 65 }
tmnxMplsGenV12v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralLastChange,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralOperState,
vRtrMplsGeneralNewLspIndex,
vRtrMplsGeneralOptimizeTimer,
vRtrMplsGeneralFRObject,
vRtrMplsGeneralResignalTimer,
vRtrMplsGeneralStaticLspOriginate,
vRtrMplsGeneralStaticLspTransit,
vRtrMplsGeneralStaticLspTerminate,
vRtrMplsGeneralDynamicLspOriginate,
vRtrMplsGeneralDynamicLspTransit,
vRtrMplsGeneralDynamicLspTerminate,
vRtrMplsGeneralDetourLspOriginate,
vRtrMplsGeneralDetourLspTransit,
vRtrMplsGeneralDetourLspTerminate,
vRtrMplsGeneralHoldTimer,
vRtrMplsGeneralDynamicBypass,
vRtrMplsGeneralNextResignal,
vRtrMplsGeneralOperDownReason,
vRtrMplsGeneralSrlgFrr,
vRtrMplsGeneralSrlgFrrStrict,
vRtrMplsGenMbbPrefCurrentHops,
vRtrMplsGenP2pActPathFastRetry,
vRtrMplsGenP2mpS2lFastRetry,
vRtrMplsGenLspInitRetryTimeout,
vRtrMplsGenIssuMplsLockdown
}
STATUS current
DESCRIPTION
"The group of all general objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 12.0 release."
::= { tmnxMplsGroups 66 }
tmnxMplsLSPPathV12v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathTableSpinlock,
vRtrMplsLspPathRowStatus,
vRtrMplsLspPathLastChange,
vRtrMplsLspPathType,
vRtrMplsLspPathProperties,
vRtrMplsLspPathBandwidth,
vRtrMplsLspPathState,
vRtrMplsLspPathPreference,
vRtrMplsLspPathSetupPriority,
vRtrMplsLspPathHoldPriority,
vRtrMplsLspPathRecord,
vRtrMplsLspPathHopLimit,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathInheritance,
vRtrMplsLspPathLspId,
vRtrMplsLspPathRetryTimeRemaining,
vRtrMplsLspPathTunnelARHopListIndex,
vRtrMplsLspPathNegotiatedMTU,
vRtrMplsLspPathFailCode,
vRtrMplsLspPathFailNodeAddr,
vRtrMplsLspPathAdminGroupInclude,
vRtrMplsLspPathAdminGroupExclude,
vRtrMplsLspPathAdaptive,
vRtrMplsLspPathOptimizeTimer,
vRtrMplsLspPathNextOptimize,
vRtrMplsLspPathOperBandwidth,
vRtrMplsLspPathResignal,
vRtrMplsLspPathTunnelCRHopListIndex,
vRtrMplsLspPathOperMTU,
vRtrMplsLspPathRecordLabel,
vRtrMplsLspPathTimeUp,
vRtrMplsLspPathTimeDown,
vRtrMplsLspPathRetryAttempts,
vRtrMplsLspPathTransitionCount,
vRtrMplsLspPathCspfQueries,
vRtrMplsLspPathLastResigAttempt,
vRtrMplsLspPathMetric,
vRtrMplsLspPathLastMBBType,
vRtrMplsLspPathLastMBBEnd,
vRtrMplsLspPathLastMBBMetric,
vRtrMplsLspPathLastMBBState,
vRtrMplsLspPathMBBTypeInProg,
vRtrMplsLspPathMBBStarted,
vRtrMplsLspPathMBBNextRetry,
vRtrMplsLspPathMBBRetryAttempts,
vRtrMplsLspPathMBBFailCode,
vRtrMplsLspPathMBBFailNodeArType,
vRtrMplsLspPathMBBFailNodeAddr,
vRtrMplsLspPathOperInterArea,
vRtrMplsLspPathChanges,
vRtrMplsLspPathTimeoutIn,
vRtrMplsLspPathMBBTimeoutIn,
vRtrMplsLspPathOperSetupPriority,
vRtrMplsLspPathOperHoldPriority,
vRtrMplsLspPathOperRecord,
vRtrMplsLspPathOperRecordLabel,
vRtrMplsLspPathOperHopLimit,
vRtrMplsLspPathOperAdminGrpIncl,
vRtrMplsLspPathOperAdminGrExcld,
vRtrMplsLspPathOperCspf,
vRtrMplsLspPathOperLeastFill,
vRtrMplsLspPathOperRsvpAdspec,
vRtrMplsLspPathOperFRNodeProtect,
vRtrMplsLspPathOperPropAdminGrp,
vRtrMplsLspPathOperFRHopLimit
}
STATUS obsolete
DESCRIPTION
"The group of all LSP Path objects in MPLS supporting management of
MPLS features on Nokia SROS series systems 12.0 release."
::= { tmnxMplsGroups 67 }
tmnxMplsLSPV12v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspRowStatus,
vRtrMplsLspLastChange,
vRtrMplsLspName,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspFromAddr,
vRtrMplsLspToAddr,
vRtrMplsLspType,
vRtrMplsLspOutSegIndx,
vRtrMplsLspRetryTimer,
vRtrMplsLspRetryLimit,
vRtrMplsLspMetric,
vRtrMplsLspCspf,
vRtrMplsLspFastReroute,
vRtrMplsLspFRHopLimit,
vRtrMplsLspFRBandwidth,
vRtrMplsLspSetupPriority,
vRtrMplsLspHoldPriority,
vRtrMplsLspRecord,
vRtrMplsLspHopLimit,
vRtrMplsLspNegotiatedMTU,
vRtrMplsLspRsvpResvStyle,
vRtrMplsLspRsvpAdspec,
vRtrMplsLspFRMethod,
vRtrMplsLspFRNodeProtect,
vRtrMplsLspAdminGroupInclude,
vRtrMplsLspAdminGroupExclude,
vRtrMplsLspAdaptive,
vRtrMplsLspInheritance,
vRtrMplsLspOptimizeTimer,
vRtrMplsLspOperFastReroute,
vRtrMplsLspFRObject,
vRtrMplsLspOctets,
vRtrMplsLspPackets,
vRtrMplsLspAge,
vRtrMplsLspTimeUp,
vRtrMplsLspTimeDown,
vRtrMplsLspPrimaryTimeUp,
vRtrMplsLspTransitions,
vRtrMplsLspLastTransition,
vRtrMplsLspLastPathChange,
vRtrMplsLspConfiguredPaths,
vRtrMplsLspStandbyPaths,
vRtrMplsLspOperationalPaths,
vRtrMplsLspHoldTimer,
vRtrMplsLspIgpShortcutLfaType,
vRtrMplsLspPropAdminGroup,
vRtrMplsLspIgpShortcutRelOffset,
vRtrMplsLspRevertTimer,
vRtrMplsLspRevertTimeRemain
}
STATUS obsolete
DESCRIPTION
"The group of all LSP objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 12.0 release."
::= { tmnxMplsGroups 68 }
tmnxMplsObsoleteNotifyV12Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsLblRangeModify
}
STATUS current
DESCRIPTION
"The group of obsolete notifications supporting management of the MPLS
operations on Nokia 7xxx SR series systems."
::= { tmnxMplsGroups 69 }
tmnxMplsLoadBalanceWtV13v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspLoadBalancingWeight,
vRtrMplsLspTempLoadBalancingWt
}
STATUS current
DESCRIPTION
"The group of all objects in MPLS supporting management of load
balancing on Nokia SROS series systems 13.0 release."
::= { tmnxMplsGroups 70 }
tmnxMplsLabelSegRouteV13v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLabelSegRouteStartLabel,
vRtrMplsLabelSegRouteEndLabel
}
STATUS current
DESCRIPTION
"The group of all objects in MPLS supporting management of segment
routing labels on Nokia SROS series systems 13.0 release."
::= { tmnxMplsGroups 71 }
tmnxMplsLabelStaticRgeV13v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLabelStaticLabelRange
}
STATUS current
DESCRIPTION
"The group of all objects in MPLS supporting management of static label
range on Nokia SROS series systems 13.0 release."
::= { tmnxMplsGroups 72 }
tmnxMpls13v0ObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLabelMaxStaticLspLabels,
vRtrMplsLabelMaxStaticSvcLabels
}
STATUS current
DESCRIPTION
"The group of obsolete objects which are no longer supported in MPLS
13.0R1 release onwards on Nokia SROS series systems."
::= { tmnxMplsGroups 73 }
tmnxMplsGlobalV13v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelCHopUnnumIfID,
vRtrMplsTunnelCHopRtrID,
vRtrMplsTunnelCHopIsABR,
vRtrMplsTunnelARHopUnnumIfID,
vRtrMplsLspTemplatePropAdmGrp,
vRtrMplsS2lSubLspInterArea,
vRtrMplsS2lSubLspIsFastRetry,
vRtrMplsS2lSubLspTimeoutIn,
vRtrMplsS2lSubLspMBBTimeoutIn,
vRtrMplsLoggerEventBundling,
vRtrMplsLspIgpShortcutRelOffset
}
STATUS current
DESCRIPTION
"The group of all global objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 12.0 release."
::= { tmnxMplsGroups 74 }
tmnxMplsClassBasedFwdV13v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspClassFwdingEnabled,
vRtrMplsLspFC,
vRtrMplsLspTempClassFwdEnabled,
vRtrMplsLspTempFC
}
STATUS obsolete
DESCRIPTION
"The group of all objects in MPLS supporting class based forwarding on
Nokia SROS series systems 13.0 release."
::= { tmnxMplsGroups 75 }
tmnxMplsBfdOnLspV13v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspBfdTemplateName,
vRtrMplsLspBfdEnable,
vRtrMplsLspBfdPingIntvl,
vRtrMplsLspPathBfdTemplateName,
vRtrMplsLspPathBfdEnable,
vRtrMplsLspPathBfdPingIntvl,
vRtrMplsLspTempBfdTemplateName,
vRtrMplsLspTempBfdEnable,
vRtrMplsLspTempBfdPingIntvl
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of MPLS features on
Nokia SROS series systems 13.0 release."
::= { tmnxMplsGroups 76 }
tmnxMplsAdminGroupObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsAdminGroupRowStatus,
vRtrMplsAdminGroupValue
}
STATUS current
DESCRIPTION
"The group of obsolete objects which are no longer supported in MPLS
14.0R1 release onwards on Nokia SROS series systems."
::= { tmnxMplsGroups 77 }
tmnxMplsIfSrlgV14v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsIfSrlgGrpTblLastChanged,
vRtrMplsIfSrlgGrpRowStatus,
vRtrMplsIfSrlgGrpLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SRLG on Nokia 7xxx SR
series systems release 6.0."
::= { tmnxMplsGroups 78 }
tmnxMplsSrlgObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsSrlgGrpTableLastChanged,
vRtrMplsSrlgGrpRowStatus,
vRtrMplsSrlgGrpLastChanged,
vRtrMplsSrlgGrpValue
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SRLG on Nokia 7xxx SR
series systems release 6.0."
::= { tmnxMplsGroups 79 }
tmnxMplsSegRouting14v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralNewLspSRIndex,
vRtrMplsGeneralSrTeLspOriginate,
vRtrMplsGeneralPceReport,
vRtrMplsLspExtPceCompute,
vRtrMplsLspExtPceControl,
vRtrMplsLspExtPceReport,
vRtrMplsLspExtTtmTunnelId,
vRtrMplsLspExtMaxSrLabels,
vRtrMplsLspExtTunnelId,
vRtrMplsLspPathProfTblLstChg,
vRtrMplsLspPathProfRowStatus,
vRtrMplsLspPathProfLastChange,
vRtrMplsLspPathProfGroupId,
vRtrMplsLspPathLastUpdateTime,
vRtrMplsLspPathLastUpdateId,
vRtrMplsLspPathLastUpdateState,
vRtrMplsLspPathLastUpdFailCode
}
STATUS obsolete
DESCRIPTION
"The group of objects in MPLS supporting Segment Routing TE of MPLS
features on Nokia SROS series systems 14.0 release."
::= { tmnxMplsGroups 80 }
tmnxMplsEntropyLabel14v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralEntropyLblRsvpTe,
vRtrMplsLspExtEntropyLabel,
vRtrMplsLspExtOperEntropyLabel,
vRtrMplsLspExtNegEntropyLbl
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting entropy label of MPLS features
on Nokia SROS series systems 14.0 release."
::= { tmnxMplsGroups 81 }
tmnxMplsLspTemplEL14v4Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempEntropyLabel
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting entropy label of MPLS features
on Nokia SROS series systems 14.0 release."
::= { tmnxMplsGroups 82 }
tmnxMplsSRLfaOvrhd14v4Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtFrrOverheadLabel
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting segment routing MPLS features
on Nokia SROS series systems 14.0 release."
::= { tmnxMplsGroups 83 }
tmnxMplsLspTempPceReportGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTemplatePceReport
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of PCE Reporting
features on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 84 }
tmnxMplsLspTempSrLbl15v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempMaxSrLabels,
vRtrMplsLspTempFrrOverheadLabel
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting segment routing labels of MPLS
features on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 85 }
tmnxMplsBfdFailureActionGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtBfdFailureAction,
vRtrMplsLspTempBfdFailureAction
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of BFD Failure
Action features on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 86 }
tmnxMplsClassFwdPlcy15v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsClassFwdPlcyTblLstChg,
vRtrMplsClassFwdPlcyRowStatus,
vRtrMplsClassFwdPlcyLastChanged,
vRtrMplsClassFwdPlcyDefSetId,
vRtrMplsClassFwdPlcyRefCount,
vRtrMplsClassFwdPlcyFCTblLstChg,
vRtrMplsClassFwdPlcyFCSetId,
vRtrMplsLspExtCbfFwdingPlcy,
vRtrMplsLspExtCbfFwdingSet,
vRtrMplsLspTempCbfFwdingPlcy,
vRtrMplsLspTempCbfFwdingSet
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting Class Based Forwarding Policy
in LSP and LSP Template on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 87 }
tmnxMplsP2PSrTe15v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsGenMeshP2PSrTeLspOrig,
vRtrMplsGenOneHopP2PSrTeLspOrig
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting P2P Segment Routing TE of MPLS
features on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 88 }
tmnxMplsLspStatsGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspAggregatePkts,
vRtrMplsLspAggregateOctets
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of LSP Statistics
on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 89 }
tmnxMplsTunnelARHopSIDGroup OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelARHopSIDType
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Tunnel AR Hop
Statistics on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 90 }
tmnxMplsLSPV15v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspRowStatus,
vRtrMplsLspLastChange,
vRtrMplsLspName,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspFromAddr,
vRtrMplsLspToAddr,
vRtrMplsLspType,
vRtrMplsLspOutSegIndx,
vRtrMplsLspRetryTimer,
vRtrMplsLspRetryLimit,
vRtrMplsLspMetric,
vRtrMplsLspCspf,
vRtrMplsLspFastReroute,
vRtrMplsLspFRHopLimit,
vRtrMplsLspFRBandwidth,
vRtrMplsLspSetupPriority,
vRtrMplsLspHoldPriority,
vRtrMplsLspRecord,
vRtrMplsLspHopLimit,
vRtrMplsLspNegotiatedMTU,
vRtrMplsLspRsvpResvStyle,
vRtrMplsLspRsvpAdspec,
vRtrMplsLspFRMethod,
vRtrMplsLspFRNodeProtect,
vRtrMplsLspAdminGroupInclude,
vRtrMplsLspAdminGroupExclude,
vRtrMplsLspAdaptive,
vRtrMplsLspInheritance,
vRtrMplsLspOptimizeTimer,
vRtrMplsLspOperFastReroute,
vRtrMplsLspFRObject,
vRtrMplsLspAge,
vRtrMplsLspTimeUp,
vRtrMplsLspTimeDown,
vRtrMplsLspPrimaryTimeUp,
vRtrMplsLspTransitions,
vRtrMplsLspLastTransition,
vRtrMplsLspLastPathChange,
vRtrMplsLspConfiguredPaths,
vRtrMplsLspStandbyPaths,
vRtrMplsLspOperationalPaths,
vRtrMplsLspHoldTimer,
vRtrMplsLspIgpShortcutLfaType,
vRtrMplsLspPropAdminGroup,
vRtrMplsLspIgpShortcutRelOffset,
vRtrMplsLspRevertTimer,
vRtrMplsLspRevertTimeRemain
}
STATUS obsolete
DESCRIPTION
"The group of all LSP objects in MPLS supporting management of MPLS
features on Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 91 }
tmnxMplsLSPV15v0ObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspOctets,
vRtrMplsLspPackets
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SRLG on Nokia SROS
series systems obsoleted in release 15.0."
::= { tmnxMplsGroups 92 }
tmnxMplsEntropyLabelSrteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralEntropyLblSrTe
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Entropy Label on
Nokia SROS series systems 15.0 release."
::= { tmnxMplsGroups 93 }
tmnxMplsReservedLblBlkGroup OBJECT-GROUP
OBJECTS {
vRtrMplsReservedLblBlkTblLastChg,
vRtrMplsReservedLblBlkRowStatus,
vRtrMplsReservedLblBlkLastChg,
vRtrMplsReservedLblBlkStartLbl,
vRtrMplsReservedLblBlkEndLbl
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of reserved label
blocks on Nokia SROS series systems 16.0 release."
::= { tmnxMplsGroups 94 }
tmnxMplsIfAltStatsGroup OBJECT-GROUP
OBJECTS {
vRtrMplsIfAltTxPktCount,
vRtrMplsIfAltRxPktCount,
vRtrMplsIfAltTxOctetCount,
vRtrMplsIfAltRxOctetCount,
vRtrMplsGeneralAuxStats
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS
capabilities on Nokia SROS series systems release 16.0."
::= { tmnxMplsGroups 95 }
vRtrMplsLspAdminTagGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspAdminTagTblLastChg,
vRtrMplsLspAdminTagRowStatus,
vRtrMplsLspAdminTagLastChanged,
vRtrMplsLspTempAdminTagTblLstChg,
vRtrMplsLspTempAdminTagRowStatus,
vRtrMplsLspTempAdminTagLastChg
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of administrative
tags in LSP on Nokia SROS series systems 16.0 release."
::= { tmnxMplsGroups 96 }
vRtrMplsFwdPlcyV16v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsFwdPlcyTblLastChg,
vRtrMplsFwdPlcyRowStatus,
vRtrMplsFwdPlcyLastChanged,
vRtrMplsFwdPlcyAdminState,
vRtrMplsFwdPlcyOperState,
vRtrMplsFwdPlcyBindingLabel,
vRtrMplsFwdPlcyEndpointAddrType,
vRtrMplsFwdPlcyEndpointAddr,
vRtrMplsFwdPlcyRevertTimer,
vRtrMplsFwdPlcyPreference,
vRtrMplsFwdPlcyNHGrpTblLastChg,
vRtrMplsFwdPlcyNHGrpRowStatus,
vRtrMplsFwdPlcyNHGrpLastChanged,
vRtrMplsFwdPlcyNHGrpAdminState,
vRtrMplsFwdPlcyNHGrpOperState,
vRtrMplsFwdPlcyNHGrpResType,
vRtrMplsFwdPlcyNHGrpLoadBalWt,
vRtrMplsFwdPlcyNhgNHTblLastChg,
vRtrMplsFwdPlcyNhgNHRowStatus,
vRtrMplsFwdPlcyNhgNHLastChanged,
vRtrMplsFwdPlcyNhgNHOperState,
vRtrMplsFwdPlcyNhgNHAddrType,
vRtrMplsFwdPlcyNhgNHAddr,
vRtrMplsFwdPlcyGenTblLastChg,
vRtrMplsFwdPlcyGenRowStatus,
vRtrMplsFwdPlcyGenLastChanged,
vRtrMplsFwdPlcyGenAdminState,
vRtrMplsFwdPlcyGenOperState,
vRtrMplsFwdPlcyGenOperDownReason,
vRtrMplsFwdPlcyGenReservedLblBlk,
vRtrMplsFwdPlcyStatsTblLastChg,
vRtrMplsFwdPlcyStatsRowStatus,
vRtrMplsFwdPlcyStatsLastChanged,
vRtrMplsFwdPlcyStatsAdminState,
vRtrMplsBindLblPathName,
vRtrMplsBindLblPathOperState,
vRtrMplsBindLblPathLastOperChg,
vRtrMplsBindLblOperDownReason,
vRtrMplsBindLblPathNumNHGrpCnt,
vRtrMplsBindLblPathRetryCount,
vRtrMplsBindLblPathRetryTimeRem,
vRtrMplsBindLblPathRevertTimer,
vRtrMplsBindLblPathIngStatsEnabl,
vRtrMplsBindLblPathPref,
vRtrMplsBLPathIngStatOperState,
vRtrMplsBindLblPathNhgOperState,
vRtrMplsBindLblPathNHgResType,
vRtrMplsBindLblPathNhgLoadBalWt,
vRtrMplsBindLblPathNhgFailovrCnt,
vRtrMplsBindLblPathNhgRevertCnt,
vRtrMplsBindLblPathNhgRevTimeRem,
vRtrMplsBindLblPathNhgNHAddrType,
vRtrMplsBindLblPathNhgNHAddr,
vRtrMplsBindLblPathNhgNHResolved,
vRtrMplsBindLblPathNhgNHOutIf,
vRtrMplsBindLblPathNhgDownReason,
vRtrMplsBindLblPathNhgNHDownCode,
vRtrMplsBindLblIngrAggPkts,
vRtrMplsBindLblIngrAggOctets,
vRtrMplsEndptPathName,
vRtrMplsEndptPathOperState,
vRtrMplsEndptPathLastOperChg,
vRtrMplsEndptPathOperDownReason,
vRtrMplsEndptPathNHGrpCnt,
vRtrMplsEndptPathRetryCount,
vRtrMplsEndptPathRetryTimeRem,
vRtrMplsEndptPathRevertTimer,
vRtrMplsEndptPathPref,
vRtrMplsEndptPathTTMPref,
vRtrMplsEndptPathNhgOperState,
vRtrMplsEndptPathNhgResType,
vRtrMplsEndptPathNhgLoadBalWt,
vRtrMplsEndptPathNhgFailovrCnt,
vRtrMplsEndptPathNhgRevertCnt,
vRtrMplsEndptPathNhgRevTimeRem,
vRtrMplsEndptPathNhgDownReason,
vRtrMplsEndptPathNhgNHAddrType,
vRtrMplsEndptPathNhgNHAddr,
vRtrMplsEndptPathNhgNHResolved,
vRtrMplsEndptPathNhgNHOutIf,
vRtrMplsEndptPathNhgNHDownCode,
vRtrMplsEndptPathMetric,
vRtrMplsBindLblPathNHgNHPLabel,
vRtrMplsEndptPathNhgNHPLabel,
vRtrMplsBindLblPathNhgWeights,
vRtrMplsEndptPathNhgWeights
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Forwarding
Policies on Nokia SROS series systems 16.0 release."
::= { tmnxMplsGroups 97 }
vRtrMplsFwdPlcyNhgNHPushLblGroup OBJECT-GROUP
OBJECTS {
vRtrMplsFwdPlcyNhgNHPushLabel1,
vRtrMplsFwdPlcyNhgNHPushLabel2,
vRtrMplsFwdPlcyNhgNHPushLabel3,
vRtrMplsFwdPlcyNhgNHPushLabel4,
vRtrMplsFwdPlcyNhgNHPushLabel5,
vRtrMplsFwdPlcyNhgNHPushLabel6,
vRtrMplsFwdPlcyNhgNHPushLabel7,
vRtrMplsFwdPlcyNhgNHPushLabel8,
vRtrMplsFwdPlcyNhgNHPushLabel9,
vRtrMplsFwdPlcyNhgNHPushLabel10,
vRtrMplsFwdPlcyMetric,
vRtrMplsFwdPlcyTtmPreference
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of
Pushed-Labels on Nokia SROS series systems 16.0 release."
::= { tmnxMplsGroups 98 }
vRtrMplsPceInitSrteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTemplateId,
vRtrMplsPceInitGenTblLastChg,
vRtrMplsPceInitGenRowStatus,
vRtrMplsPceInitGenSrte,
vRtrMplsPceInitGenSrteAdminState,
vRtrMplsPceInitGenSrteOperState,
vRtrMplsGenPceInitP2PSrTeLspOrig,
vRtrMplsPceInitGenSrteOperDnRsn
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of PCE INIT LSPs on
Nokia SROS series systems 16.0 release."
::= { tmnxMplsGroups 99 }
vRtrMplsAutoBwUseLastAdjBWGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspAutoBWUseLastAdjBW,
vRtrMplsLspAutoBWSecRetryLimit,
vRtrMplsLspAutoBWLastAdjBW
}
STATUS current
DESCRIPTION
"The group of notification supporting MPLS Auto-Bandwidth last
adjusted use bandwidth on Nokia SROS series systems 16.0 Release."
::= { tmnxMplsGroups 100 }
tmnxMplsGeneralSrTeLspGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGenSrTeResignalTimer,
vRtrMplsLspExtPathCompMeth,
vRtrMplsLspExtMetricType,
vRtrMplsLspExtLocalSrProt,
vRtrMplsLspExtLabelStackRed,
vRtrMplsLspTempPathCompMeth,
vRtrMplsLspTempMetricType,
vRtrMplsLspTempLocalSrProt,
vRtrMplsLspTempLabelStackRed,
vRtrMplsLspPathOperCompMeth,
vRtrMplsLspPathOperMetricType,
vRtrMplsLspPathOperLocalSrProt,
vRtrMplsLspPathOperLabelStackRed,
vRtrMplsGenSrTeResigOnIgpEvent,
vRtrMplsGenSrteNextResignal
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of SR-TE LSP
resignal timers on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 101 }
tmnxMplsFwdPlcyEgressStatsGroup OBJECT-GROUP
OBJECTS {
vRtrMplsBindLblPathNhgNHEgrOper,
vRtrMplsBindLblEgrStatsAggPkts,
vRtrMplsBindLblEgrStatsAggOctets,
vRtrMplsBindLblPathEgrStatsEnabl,
vRtrMplsBLPathEgrStatOperState,
vRtrMplsEndptPathNhgNHEgrOper,
vRtrMplsEndptEgrStatsAggPkts,
vRtrMplsEndptEgrStatsAggOctets,
vRtrMplsEndptPathEgrStatsEnabl,
vRtrMplsEndptPathEgrStatsOper
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Forwarding
Policy Egress Statistics on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 102 }
tmnxMplsSrteSBfdGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtBfdUpWaitTimer,
vRtrMplsLspPathBfdUpWaitTimer,
vRtrMplsLspPathBfdUpWaitTmLeft,
vRtrMplsLspPathBfdState,
vRtrMplsLspPathBfdStartFailRsn,
vRtrMplsLspTempBfdUpWaitTimer,
vRtrMplsLspPathBfdOperUpWaitTmr
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of SR-TE SBFD on
Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 103 }
tmnxMplsGenMaxBypassPlrGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGenMaxBypassPlrAssoc
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Max Bypass PLR
Associations on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 104 }
tmnxMplsLspPathEgressStatsGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathEgrStatsOperState,
vRtrMplsLspEgressStatsAggrPkts,
vRtrMplsLspEgressStatsAggrOctets
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of LSP egress
statistics on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 105 }
tmnxMplsLspSelfPingGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGenLspSelfPingInterval,
vRtrMplsGenLspSelfPingTimeout,
vRtrMplsGenLspSelfPingRsvpTe,
vRtrMplsLspTempSelfPing,
vRtrMplsLspExtSelfPing
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of SR-TE SBFD on
Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 106 }
tmnxMplsLspSrTeIpv6Group OBJECT-GROUP
OBJECTS {
vRtrMplsGeneralV6OperState,
vRtrMplsGeneralV6OperDownReason,
vRtrMplsIfV6OperState
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of SR-TE IPV6
address on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 107 }
tmnxMplsPathHopGroup OBJECT-GROUP
OBJECTS {
vRtrMplsPathHopTableLastChg,
vRtrMplsPathHopRowStatus,
vRtrMplsPathHopLastChange,
vRtrMplsPathHopAddrType,
vRtrMplsPathHopAddr,
vRtrMplsPathHopStrictOrLoose,
vRtrMplsPathHopSidLabel
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of MPLS hops on
Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 108 }
tmnxMplsLspNgAddrGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspNgFromAddr,
vRtrMplsLspNgToAddr,
vRtrMplsTunnelARHopNgRouterId,
vRtrMplsLspPathNgFNAddrType,
vRtrMplsLspPathNgFNAddr
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of Ng to/from
address on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 109 }
tmnxMplsLspSelfPingOperGroup OBJECT-GROUP
OBJECTS {
vRtrMplsGenLspSelfPingTimeouts,
vRtrMplsLspSelfPingTimeouts,
vRtrMplsLspPathSelfPingOprState
}
STATUS current
DESCRIPTION
"The group of operational objects in MPLS supporting management of
SR-TE SBFD on Nokia SROS series systems 19.0 release."
::= { tmnxMplsGroups 110 }
tmnxMplsNotificationIPv6Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsIPv6StateChange,
vRtrMplsIfIPv6StateChange
}
STATUS current
DESCRIPTION
"The group of notifications supporting the MPLS IPv6 on Nokia SROS
series systems 19.10 Release."
::= { tmnxMplsGroups 111 }
tmnxMplsNotifyObjsLspResource OBJECT-GROUP
OBJECTS {
vRtrMplsResourceType
}
STATUS current
DESCRIPTION
"The group of notification objects supporting IGP shortcut notification
feature on Nokia SROS series systems 20.0 Release."
::= { tmnxMplsGroups 112 }
tmnxMplsNotifyV20v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsLspResourceExhaustion
}
STATUS current
DESCRIPTION
"The group of notifications supporting the MPLS on Nokia SROS series
systems 20.0 Release."
::= { tmnxMplsGroups 113 }
tmnxMplsV20v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelARHopProtection,
vRtrMplsTunnelARHopRecordLabel,
vRtrMplsLspRowStatus,
vRtrMplsLspLastChange,
vRtrMplsLspName,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspType,
vRtrMplsLspOutSegIndx,
vRtrMplsLspRetryTimer,
vRtrMplsLspRetryLimit,
vRtrMplsLspMetric,
vRtrMplsLspFastReroute,
vRtrMplsLspFRHopLimit,
vRtrMplsLspFRBandwidth,
vRtrMplsLspSetupPriority,
vRtrMplsLspHoldPriority,
vRtrMplsLspRecord,
vRtrMplsLspHopLimit,
vRtrMplsLspNegotiatedMTU,
vRtrMplsLspRsvpResvStyle,
vRtrMplsLspRsvpAdspec,
vRtrMplsLspFRMethod,
vRtrMplsLspFRNodeProtect,
vRtrMplsLspAdminGroupInclude,
vRtrMplsLspAdminGroupExclude,
vRtrMplsLspAdaptive,
vRtrMplsLspInheritance,
vRtrMplsLspOptimizeTimer,
vRtrMplsLspOperFastReroute,
vRtrMplsLspFRObject,
vRtrMplsLspAge,
vRtrMplsLspTimeUp,
vRtrMplsLspTimeDown,
vRtrMplsLspPrimaryTimeUp,
vRtrMplsLspTransitions,
vRtrMplsLspLastTransition,
vRtrMplsLspLastPathChange,
vRtrMplsLspConfiguredPaths,
vRtrMplsLspStandbyPaths,
vRtrMplsLspOperationalPaths,
vRtrMplsLspHoldTimer,
vRtrMplsLspIgpShortcutLfaType,
vRtrMplsLspPropAdminGroup,
vRtrMplsLspIgpShortcutRelOffset,
vRtrMplsLspRevertTimer,
vRtrMplsLspRevertTimeRemain,
vRtrMplsLspTemplateTblLastChgd,
vRtrMplsLspTemplateRowStatus,
vRtrMplsLspTemplateLastChanged,
vRtrMplsLspTemplateAdminState,
vRtrMplsLspTemplateType,
vRtrMplsLspTemplateAdaptive,
vRtrMplsLspTemplateBandwidth,
vRtrMplsLspTemplateCspf,
vRtrMplsLspTemplateDefaultPath,
vRtrMplsLspTemplateAdmGrpIncl,
vRtrMplsLspTemplateAdmGrpExcl,
vRtrMplsLspTemplateFastReroute,
vRtrMplsLspTemplateFRMethod,
vRtrMplsLspTemplateFRHopLimit,
vRtrMplsLspTemplateHopLimit,
vRtrMplsLspTemplateRecord,
vRtrMplsLspTemplateRecordLabel,
vRtrMplsLspTemplateRetryLimit,
vRtrMplsLspTemplateRetryTimer,
vRtrMplsLspTemplateCspfTeMetric,
vRtrMplsLspOriginTemplate,
vRtrMplsLspTemplateLspCount,
vRtrMplsLspTemplateMvpnRefCount,
vRtrMplsGeneralNewLspSRIndex,
vRtrMplsGeneralSrTeLspOriginate,
vRtrMplsGeneralPceReport,
vRtrMplsLspExtPceControl,
vRtrMplsLspExtPceReport,
vRtrMplsLspExtTtmTunnelId,
vRtrMplsLspExtMaxSrLabels,
vRtrMplsLspExtTunnelId,
vRtrMplsLspPathProfTblLstChg,
vRtrMplsLspPathProfRowStatus,
vRtrMplsLspPathProfLastChange,
vRtrMplsLspPathProfGroupId,
vRtrMplsLspPathLastUpdateTime,
vRtrMplsLspPathLastUpdateId,
vRtrMplsLspPathLastUpdateState,
vRtrMplsLspPathLastUpdFailCode,
vRtrMplsLspPathTableSpinlock,
vRtrMplsLspPathRowStatus,
vRtrMplsLspPathLastChange,
vRtrMplsLspPathType,
vRtrMplsLspPathProperties,
vRtrMplsLspPathBandwidth,
vRtrMplsLspPathState,
vRtrMplsLspPathPreference,
vRtrMplsLspPathSetupPriority,
vRtrMplsLspPathHoldPriority,
vRtrMplsLspPathRecord,
vRtrMplsLspPathHopLimit,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathInheritance,
vRtrMplsLspPathLspId,
vRtrMplsLspPathRetryTimeRemaining,
vRtrMplsLspPathTunnelARHopListIndex,
vRtrMplsLspPathNegotiatedMTU,
vRtrMplsLspPathFailCode,
vRtrMplsLspPathFailNodeAddr,
vRtrMplsLspPathAdminGroupInclude,
vRtrMplsLspPathAdminGroupExclude,
vRtrMplsLspPathAdaptive,
vRtrMplsLspPathOptimizeTimer,
vRtrMplsLspPathNextOptimize,
vRtrMplsLspPathOperBandwidth,
vRtrMplsLspPathResignal,
vRtrMplsLspPathTunnelCRHopListIndex,
vRtrMplsLspPathOperMTU,
vRtrMplsLspPathRecordLabel,
vRtrMplsLspPathTimeUp,
vRtrMplsLspPathTimeDown,
vRtrMplsLspPathRetryAttempts,
vRtrMplsLspPathTransitionCount,
vRtrMplsLspPathCspfQueries,
vRtrMplsLspPathLastResigAttempt,
vRtrMplsLspPathMetric,
vRtrMplsLspPathLastMBBType,
vRtrMplsLspPathLastMBBEnd,
vRtrMplsLspPathLastMBBMetric,
vRtrMplsLspPathLastMBBState,
vRtrMplsLspPathMBBTypeInProg,
vRtrMplsLspPathMBBStarted,
vRtrMplsLspPathMBBNextRetry,
vRtrMplsLspPathMBBRetryAttempts,
vRtrMplsLspPathMBBFailCode,
vRtrMplsLspPathMBBFailNodeArType,
vRtrMplsLspPathMBBFailNodeAddr,
vRtrMplsLspPathOperInterArea,
vRtrMplsLspPathChanges,
vRtrMplsLspPathTimeoutIn,
vRtrMplsLspPathMBBTimeoutIn,
vRtrMplsLspPathOperSetupPriority,
vRtrMplsLspPathOperHoldPriority,
vRtrMplsLspPathOperRecord,
vRtrMplsLspPathOperRecordLabel,
vRtrMplsLspPathOperHopLimit,
vRtrMplsLspPathOperAdminGrpIncl,
vRtrMplsLspPathOperAdminGrExcld,
vRtrMplsLspPathOperLeastFill,
vRtrMplsLspPathOperRsvpAdspec,
vRtrMplsLspPathOperFRNodeProtect,
vRtrMplsLspPathOperPropAdminGrp,
vRtrMplsLspPathOperFRHopLimit,
vRtrMplsLspClassFwdingEnabled,
vRtrMplsLspTempClassFwdEnabled,
vRtrMplsLspPathLastMBBFailCode
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS interfaces
on Nokia SROS series systems 20.0 Release."
::= { tmnxMplsGroups 114 }
tmnxMplsObsoletedV20v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelARHopRouterId,
vRtrMplsLspFromAddr,
vRtrMplsLspToAddr,
vRtrMplsLspCspf,
vRtrMplsLspTemplateCspf,
vRtrMplsLspCspfTeMetricEnabled,
vRtrMplsLspTemplateCspfTeMetric,
vRtrMplsLspExtPceCompute,
vRtrMplsLspPathOperCspf
}
STATUS current
DESCRIPTION
"The group of obsolete objects for MPLS on a Nokia SROS series systems
20.0 release."
::= { tmnxMplsGroups 115 }
tmnxMplsLspSelfPingV20v0Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspSelfPingTimeoutAction
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of SR-TE SBFD on
Nokia SROS series systems 20.0 release."
::= { tmnxMplsGroups 116 }
tmnxMplsClassFwdObsoleteGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspFC,
vRtrMplsLspTempFC
}
STATUS current
DESCRIPTION
"The group of objects supporting management of class forwarding on
Nokia SROS series systems obsoleted in release 20.0."
::= { tmnxMplsGroups 117 }
tmnxMplsSrTeIpv6LspTempGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempAddrFamily
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of LSP Template
Ipv6 on Nokia SROS series systems 20.0 release."
::= { tmnxMplsGroups 118 }
tmnxMplsTunnelARHopIdTypeGroup OBJECT-GROUP
OBJECTS {
vRtrMplsTunnelARHopNgRtrIdType
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of MPLS tunnel AR
Hop table on Nokia SROS series systems."
::= { tmnxMplsGroups 119 }
tmnxMplsLspPcepToLocalGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtFallbkPathComp
}
STATUS current
DESCRIPTION
"The group of objects in MPLS supporting management of LSP PCEP to
local cspf on Nokia SROS series systems."
::= { tmnxMplsGroups 120 }
tmnxMplsGenV20Group OBJECT-GROUP
OBJECTS {
vRtrMplsGenResignalOnIgpOverload
}
STATUS current
DESCRIPTION
"The group of objects supporting management of extended MPLS interfaces
on Nokia SROS series systems 20.0 Release."
::= { tmnxMplsGroups 121 }
tmnxMplsGenLspSelfPingV20Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspSelfPingOamNoRsc,
vRtrMplsGenLspSelfPingOamNoRsc
}
STATUS current
DESCRIPTION
"The group of operational objects in MPLS supporting management of LSP
self-ping on Nokia SROS series systems 20.0 Release."
::= { tmnxMplsGroups 122 }
tmnxMplsGenSrTeLspCountV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsGenDynP2pLspUp,
vRtrMplsGenSrTeIpv4LspUp,
vRtrMplsGenSrTeIpv6LspUp,
vRtrMplsGenMeshSrTeIpv4LspUp,
vRtrMplsGenMeshSrTeIpv6LspUp,
vRtrMplsGenOneHopSrTeIpv4LspUp,
vRtrMplsGenOneHopSrTeIpv6LspUp,
vRtrMplsGenPceInitSrTeIpv4LspUp,
vRtrMplsGenPceInitSrTeIpv6LspUp,
vRtrMplsGenOnDemandSrTeLspOrig,
vRtrMplsGenOnDemandSrTeIpv4LspUp,
vRtrMplsGenOnDemandSrTeIpv6LspUp
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP
counts on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 123 }
tmnxMplsLspV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtTriggerManualSw
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP
on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 124 }
tmnxMplsGenTTMV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsGenTunnelTablePrefRsvpTe,
vRtrMplsGenTunnelTablePrefSrTe
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS Tunnel Table
preference on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 125 }
tmnxMplsLspPathDegradeV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspPathDegraded,
vRtrMplsLspPathDegradedReason,
vRtrMplsLspExtActivePathIndex
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP Path
degradation information on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 126 }
tmnxMplsNotifyObjsLspPathFailure OBJECT-GROUP
OBJECTS {
vRtrMplsLspManualSwFailReason,
vRtrMplsLspPathManDegState
}
STATUS current
DESCRIPTION
"The group of notification objects supporting MPLS LSP Path failure on
Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 127 }
tmnxMplsNotifyLspPathV21v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsLspManualSwitchFailure,
vRtrMplsLspPathManualDegStateChg
}
STATUS current
DESCRIPTION
"The group of notifications supporting the MPLS LSP Path failure on
Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 128 }
tmnxMplsPccPceOperStateV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsGenRsvpPccOperState,
vRtrMplsGenRsvpPceOperState,
vRtrMplsGenSrTePccOperState,
vRtrMplsGenSrTePceOperState
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS
on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 129 }
tmnxMplsLspTempExtV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempExtFallbkPathComp,
vRtrMplsLspTempExtPceControl
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP Template on
Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 130 }
tmnxMplsLspStatsModeV21Group OBJECT-GROUP
OBJECTS {
vRtrMplsLspStatsMode,
vRtrMplsLspTemplateEgrStatsMode,
vRtrMplsLspTempInStatsMode
}
STATUS current
DESCRIPTION
"The group of notifications supporting the MPLS LSP Stat mode on Nokia
SROS series systems 21.0 Release."
::= { tmnxMplsGroups 131 }
tmnxMplsLspOvrTunnelElcGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtOverrideTunElc,
vRtrMplsLspTempExtOverrideTunElc
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP Override Tunnel
ELC on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 133 }
tmnxMplsLspTransportFrrGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempExtPrefTransFrr,
vRtrMplsLspExtPrefTransFrr
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP hardware
fast-reroute protection (FRR) on Nokia SROS series systems 21.0
Release."
::= { tmnxMplsGroups 134 }
tmnxMplsLspTempPathProfGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspTempPathProTblLastChg,
vRtrMplsLspTempPathProfRowStatus,
vRtrMplsLspTempPathProfLastChg,
vRtrMplsLspTempPathProfGroupId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP Template path
profile on Nokia SROS series systems 21.0 Release."
::= { tmnxMplsGroups 135 }
tmnxMplsLspExtBfdGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtBfdReturnPathLabel,
vRtrMplsLspPathReturnPathLabel,
vRtrMplsLspTempExtReturnPathLbl
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MPLS LSP 22.0 Release."
::= { tmnxMplsGroups 136 }
tmnxMplsLspRateCountersGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspStatsAggregateOnly,
vRtrMplsLspStatsRateEnabled,
vRtrMplsLspStatsRatePkts,
vRtrMplsLspStatsRateMbps
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Rate collection for MPLS
LSP Statistics in 22.0 Release."
::= { tmnxMplsGroups 137 }
tmnxP2mpMplsLspSoftPreemptGroup OBJECT-GROUP
OBJECTS {
vRtrMplsLspExtSoftPreemption,
vRtrMplsLspTempExtSoftPreemption
}
STATUS current
DESCRIPTION
"The group of objects supporting management of soft preemption in MPLS
LSP and LSP-Template in 22.0 Release."
::= { tmnxMplsGroups 138 }
tmnxMplsNotifyV22v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
vRtrMplsS2lSubLspPreempted
}
STATUS current
DESCRIPTION
"The group of notifications supporting MPLS on Nokia SROS series
systems 22.0 Release."
::= { tmnxMplsGroups 139 }
tmnxMplsNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 6 }
tmnxMplsNotifications OBJECT IDENTIFIER ::= { tmnxMplsNotifyPrefix 0 }
vRtrMplsStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralOperState
}
STATUS current
DESCRIPTION
"This Notification is generated when the MPLS module changes state"
::= { tmnxMplsNotifications 1 }
vRtrMplsIfStateChange NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrIfIndex,
vRtrMplsIfAdminState,
vRtrMplsIfOperState
}
STATUS current
DESCRIPTION
"This Notification is generated when the MPLS interface changes state"
::= { tmnxMplsNotifications 2 }
vRtrMplsLspUp NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspAdminState,
vRtrMplsLspOperState
}
STATUS current
DESCRIPTION
"This Notification is generated when a LSP transitions to the
'inService' state from any other state."
::= { tmnxMplsNotifications 3 }
vRtrMplsLspDown NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspNotificationReasonCode
}
STATUS current
DESCRIPTION
"This Notification is generated when an LSP transitions out of
'inService' state to any other state."
::= { tmnxMplsNotifications 4 }
vRtrMplsLspPathUp NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState
}
STATUS current
DESCRIPTION
"This Notification is generated when a LSP Path transitions to the
'inService' state from any other state."
::= { tmnxMplsNotifications 5 }
vRtrMplsLspPathDown NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathNotificationReasonCode
}
STATUS current
DESCRIPTION
"This Notification is generated when a LSP Path transitions out of
'inService' state to any other state."
::= { tmnxMplsNotifications 6 }
vRtrMplsLspPathRerouted NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState
}
STATUS current
DESCRIPTION
"The vRtrMplsLspPathRerouted notification is generated when an LSP Path
is rerouted."
::= { tmnxMplsNotifications 7 }
vRtrMplsLspPathResignaled NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathLastMBBType
}
STATUS current
DESCRIPTION
"The vRtrMplsLspPathResignaled notification is generated when an LSP
Path is resignalled. The vRtrMplsLspPathLastMBBType indicates the
reason why the LSP Path was resignalled."
::= { tmnxMplsNotifications 8 }
vRtrMplsP2mpInstanceUp NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstNotifIndex,
vRtrMplsP2mpInstAdminState,
vRtrMplsP2mpInstOperState
}
STATUS current
DESCRIPTION
"This Notification is generated when a P2MP instance transitions to the
'inService' state from any other state."
::= { tmnxMplsNotifications 9 }
vRtrMplsP2mpInstanceDown NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstNotifIndex,
vRtrMplsP2mpInstAdminState,
vRtrMplsP2mpInstOperState,
vRtrMplsP2mpInstNotifReasonCode
}
STATUS current
DESCRIPTION
"This Notification is generated when a P2MP instance transitions out of
'inService' state to any other state."
::= { tmnxMplsNotifications 10 }
vRtrMplsS2lSubLspUp NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstNotifIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
vRtrMplsS2lSubLspNtDstAddrType,
vRtrMplsS2lSubLspNtDstAddr,
vRtrMplsS2lSubLspAdminState,
vRtrMplsS2lSubLspOperState
}
STATUS current
DESCRIPTION
"This Notification is generated when a S2l sub LSP transitions to the
'inService' state from any other state."
::= { tmnxMplsNotifications 11 }
vRtrMplsS2lSubLspDown NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstNotifIndex,
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
vRtrMplsS2lSubLspNtDstAddrType,
vRtrMplsS2lSubLspNtDstAddr,
vRtrMplsS2lSubLspAdminState,
vRtrMplsS2lSubLspOperState,
vRtrMplsP2mpInstNotifReasonCode
}
STATUS current
DESCRIPTION
"This Notification is generated when a S2l sub LSP transitions out of
'inService' state to any other state."
::= { tmnxMplsNotifications 12 }
vRtrMplsS2lSubLspRerouted NOTIFICATION-TYPE
OBJECTS {
vRtrMplsS2lSubLspAdminState,
vRtrMplsS2lSubLspOperState
}
STATUS current
DESCRIPTION
"The vRtrMplsS2lSubLspRerouted notification is generated when an S2l
sub LSP is rerouted."
::= { tmnxMplsNotifications 13 }
vRtrMplsS2lSubLspResignaled NOTIFICATION-TYPE
OBJECTS {
vRtrMplsS2lSubLspAdminState,
vRtrMplsS2lSubLspOperState,
vRtrMplsS2lSubLspLastMBBType
}
STATUS current
DESCRIPTION
"The vRtrMplsS2lSubLspResignaled notification is generated when an S2l
sub LSP is resignalled. The vRtrMplsS2lSubLspLastMBBType indicates the
reason why the S2l sub LSP was resignalled."
::= { tmnxMplsNotifications 14 }
vRtrMplsLspPathSoftPreempted NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState
}
STATUS current
DESCRIPTION
"The vRtrMplsLspPathSoftPreempted notification is generated when an LSP
Path is soft-preempted."
::= { tmnxMplsNotifications 15 }
vRtrMplsLspPathLstFillReoptElig NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLspPathResignalEligible,
vRtrMplsLspPathCongChgPercent
}
STATUS current
DESCRIPTION
"The vRtrMplsLspPathLstFillReoptElig notification is set/reset based on
when a timer based resignal found/did not find a path with the same
cost but which has a better least-fill metric."
::= { tmnxMplsNotifications 16 }
vRtrMplsP2mpInstanceResignaled NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsP2mpInstNotifIndex,
vRtrMplsP2mpInstAdminState,
vRtrMplsP2mpInstOperState,
vRtrMplsP2mpInstLastMBBType
}
STATUS current
DESCRIPTION
"This Notification is generated when a P2MP instance is resignalled.
The vRtrMplsP2mpInstLastMBBType indicates the reason why the P2MP
instance was resignalled."
::= { tmnxMplsNotifications 17 }
vRtrMplsResignalTimerExpired NOTIFICATION-TYPE
OBJECTS {
vRtrMplsGeneralResignalTimer
}
STATUS current
DESCRIPTION
"The vRtrMplsResignalTimerExpired notification is generated when the
resignal timer expires for a MPLS instance. Make before break (MBB)
would be started only on those P2P LSP (Point to Point) paths that
need to be resignalled. vRtrMplsGeneralResignalTimer would be reset
once this notification is sent."
::= { tmnxMplsNotifications 18 }
vRtrMplsLspPathMbbStatusEvent NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLspPathAdminState,
vRtrMplsLspPathOperState,
vRtrMplsLspPathLastMBBType,
vRtrMplsLspPathMbbStatus,
vRtrMplsLspPathMbbReasonCode
}
STATUS current
DESCRIPTION
"The vRtrMplsLspPathMbbStatusEvent notification is generated to report
the status of the make-before-break(MBB) operation for the LSP path."
::= { tmnxMplsNotifications 19 }
vRtrMplsLspSwitchStbyFailure NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspSwitchStbyPathForce,
vRtrMplsLspSwitchStbyPathIndex,
vRtrMplsLspSwitchStbyReasonCode
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsLspSwitchStbyFailure notification is generated to
report an unsuccessful switchover from the current active secondary
LSP path of an LSP to another secondary standby LSP path. The reason
for the failure is specified by vRtrMplsLspSwitchStbyReasonCode.
[EFFECT] The switchover to the new standby path failed for the LSP.
[RECOVERY] The vRtrMplsLspSwitchStbyReasonCode will help the user
troubleshoot the failure. The user can attempt to switchover to
another standby LSP path again."
::= { tmnxMplsNotifications 20 }
vRtrMplsLspActivePathChanged NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLspPathState,
vRtrMplsLspPathActiveByManual,
vRtrMplsLspOldTunnelIndex
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsLspActivePathChanged notification is generated
when the active path of an LSP successfully switches to an new path.
This notification will also be sent when the active LSP path does not
change but only the switch method changes on the path.
The old LSP path index is specified by vRtrMplsLspOldTunnelIndex.
The state and switch method of the current active LSP path are
specified by vRtrMplsLspPathState and vRtrMplsLspPathActiveByManual
respectively.
[EFFECT] The switchover to the new LSP path was successful
and/or the switch method of the current active LSP path changed.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 21 }
vRtrMplsXCBundleChange NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsXCNotifRednIndicesBitMap,
vRtrMplsXCNotifyRednBundlingType,
vRtrMplsXCNotifyRednNumOfBitsSet,
vRtrMplsXCNotifyRednStartIndex,
vRtrMplsXCNotifyRednEndIndex
}
STATUS current
DESCRIPTION
"[CAUSE] vRtrMplsXCBundleChange is generated when one or more RSVP
sessions changed state and retained the changed state for an entire
quiet interval of 2 minutes or the maximum interval of 10 minutes if
the state of RSVP sessions kept on changing during this period of
multiple quiet intervals.
[EFFECT] RSVP sessions represented by bits in
vRtrMplsXCNotifRednIndicesBitMap changed state on this router
instance.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 22 }
vRtrMplsLblRangeModify NOTIFICATION-TYPE
OBJECTS {
vRtrMplsLabelMaxStaticLspLabels,
vRtrMplsLabelMaxStaticSvcLabels
}
STATUS obsolete
DESCRIPTION
"[CAUSE] vRtrMplsLblRangeModify is generated when the values of
vRtrMplsLabelMaxStaticLspLabels or vRtrMplsLabelMaxStaticSvcLabels
have been modified.
[EFFECT] The maximum static labels are modified.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 23 }
vRtrMplsNodeInIgpOverload NOTIFICATION-TYPE
OBJECTS {
vRtrMplsGenRetryOnIgpOverload,
vRtrMplsIgpOverloadRtrAddrType,
vRtrMplsIgpOverloadRtrAddr,
vRtrMplsIgpOverloadIgpType
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsNodeInIgpOverload notification is generated when
MPLS gets a notification that a node is in IGP overload state.
[EFFECT] The LSPs transiting through nodes that are in IGP overload
state are teardown.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 24 }
vRtrMplsIPv6StateChange NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsGeneralAdminState,
vRtrMplsGeneralV6OperState
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsIPv6StateChange notification is generated when
MPLS protocol instance changes state.
[EFFECT] The SR-TE LSPs with IPv6 addresses transition state.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 25 }
vRtrMplsIfIPv6StateChange NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrIfIndex,
vRtrMplsIfAdminState,
vRtrMplsIfV6OperState
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsIPv6StateChange notification is generated when
MPLS interface changes state.
[EFFECT] The SR-TE LSPs with IPv6 addresses transition state.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 26 }
vRtrMplsLspResourceExhaustion NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspType,
vRtrMplsLspName,
vRtrMplsResourceType
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsLspResourceExhaustion notification is generated
when CPM or data path resource specified by vRtrMplsResourceType is
exhausted.
[EFFECT] If vRtrMplsResourceType is 'egressStatistics', LSP path
egress statistics will not be collected.
[RECOVERY] Appropriate config changes in the system may be required to
free up the resources.
Once the resources are available and vRtrMplsResourceType is
'egressStatistics' and vRtrMplsLspType is 'srTe', lsp
egress-statistics admin down and up will be needed to bring up lsp
path egress-statistics."
::= { tmnxMplsNotifications 27 }
vRtrMplsLspManualSwitchFailure NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspIndex,
vRtrMplsLspAdminState,
vRtrMplsLspOperState,
vRtrMplsLspExtTriggerManualSw,
vRtrMplsLspManualSwFailReason
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsLspManualSwitchFailure notification is generated
to report an unsuccessful manually triggered active path switch for
the LSP. The reason for the failure is specified by
vRtrMplsLspManualSwFailReason.
[EFFECT] The manually triggered active path switch failed for the LSP.
[RECOVERY] vRtrMplsLspManualSwFailReason will help the user
troubleshoot the failure. The user can attempt to manually switch the
LSP again."
::= { tmnxMplsNotifications 28 }
vRtrMplsLspPathManualDegStateChg NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrMplsLspPathState,
vRtrMplsLspPathManDegState
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsLspPathManualDegStateChg notification is
generated when the manually degraded state of the LSP Path changes to
a manually triggered active path switch for the LSP.
[EFFECT] The manually degraded state changed for the LSP path.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 29 }
vRtrMplsS2lSubLspPreempted NOTIFICATION-TYPE
OBJECTS {
vRtrMplsS2lSubLspAdminState,
vRtrMplsS2lSubLspOperState
}
STATUS current
DESCRIPTION
"[CAUSE] The vRtrMplsS2lSubLspPreempted notification is generated when
an S2l sub LSP is soft-preempted.
[EFFECT] If applicable, soft-preemption MBB will be started to
resignal the S2l sub LSP. If the S2l sub LSP has not been resignaled
by the time the preemption timer expires, the S2l will be torn down.
[RECOVERY] There is no recovery required for this notification."
::= { tmnxMplsNotifications 30 }
END