mibs/nokia/aos7/ALCATEL-IND1-BFD-MIB
ALCATEL-IND1-BFD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
Unsigned32, Counter64,TimeTicks,
OBJECT-IDENTITY
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE,OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus
FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB -- [RFC2863]
InetAddress, InetAddressType, InetPortNumber
FROM INET-ADDRESS-MIB -- [RFC4001]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
softentIND1BFD
FROM ALCATEL-IND1-BASE;
alcatelIND1BfdMIB MODULE-IDENTITY
LAST-UPDATED "201005050000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This document describes the Management Information Base for
Bidirectional Forwarding Detection(BFD) Protocol.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201005050000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { softentIND1BFD 1}
alaBfdObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Bidirectional Forwarding Detection subsystem managed objects"
::= { alcatelIND1BfdMIB 1 }
alcatelIND1BfdMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Conformance"
::= { alcatelIND1BfdMIB 2 }
-- Textual Conventions
AlaBfdInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The BFD interval delay, in milliseconds."
SYNTAX Unsigned32 (0..4294967295)
AlaBfdDiag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A common BFD diagnostic code."
SYNTAX INTEGER {
noDiagnostic(0),
controlDetectionTimeExpired(1),
echoFunctionFailed(2),
neighborSignaledSessionDown(3),
forwardingPlaneReset(4),
pathDown(5),
concatenatedPathDown(6),
administrativelyDown(7),
reverseConcatenatedPathDown (8)
}
AlaBfdStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Administrative status"
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
-- BFD General Variables
alaBfdGlobalObjects OBJECT IDENTIFIER ::= { alaBfdObjects 1 }
alaBfdGlobalVersionNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the BFD protocol that is used by BFD sessions in this
router instance."
DEFVAL { 1 }
::= { alaBfdGlobalObjects 1 }
alaBfdGlobalAdminStatus OBJECT-TYPE
SYNTAX AlaBfdStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of BFD in this router instance."
DEFVAL { disabled }
::= { alaBfdGlobalObjects 2 }
alaBfdGlobalTxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Desired Tx interval, in milliseconds, at which packets should be
transmitted on BFD sessions in this router instance."
DEFVAL { 300 }
::= { alaBfdGlobalObjects 3 }
alaBfdGlobalRxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Minimum Rx interval, in milliseconds, at which packets can be
received on BFD sessions in this router instance."
DEFVAL { 300 }
::= { alaBfdGlobalObjects 4 }
alaBfdGlobalDetectMult OBJECT-TYPE
SYNTAX Integer32 (3..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Detection time multiplier. The negotiated transmit interval, multiplied by
the value of this object, provides the detection time for the receiving system."
DEFVAL { 3 }
::= { alaBfdGlobalObjects 5}
alaBfdGlobalEchoRxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Minimum Echo Rx interval, in milliseconds, at which packets can be
received on BFD sessions in this router instance."
DEFVAL { 300 }
::= { alaBfdGlobalObjects 6 }
alaBfdGlobalProtocolApps OBJECT-TYPE
SYNTAX BITS {
vrrp(0),
staticRtg(1),
ospf(2),
bgp(3),
isis(4),
pim(5),
dvmrp(6),
ospf3(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit map object to reflect BFD applications currently registered to
request BFD session state notifications. Bits 0 - 6 are currently in use, and
if set, indicate that the respective application is registered with BFD:
bit 0 - VRRP
bit 1 - STATIC ROUTING (i.e. IP Route Manager)
bit 2 - OSPF
bit 3 - BGP
bit 4 - ISIS
bit 5 - PIM
bit 6 - DVMRP
bit 7 - OSPF3 "
::= { alaBfdGlobalObjects 7}
-- BFD interface Table
-- BFD interface Table specifies the configured session parameters used over the IP interface.
alaBfdIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaBfdIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Interface Table describes the configured parameters used for
BFD sessions on this outgoing IP interface, identified by the interface index."
::= { alaBfdObjects 2 }
alaBfdIntfEntry OBJECT-TYPE
SYNTAX AlaBfdIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD interface Entry describes BFD session configuration for the IP
interface."
INDEX { alaBfdIntfIndex }
::= { alaBfdIntfTable 1 }
AlaBfdIntfEntry ::= SEQUENCE {
alaBfdIntfIndex InterfaceIndex,
alaBfdIntfAddrType InetAddressType,
alaBfdIntfAddr InetAddress,
alaBfdIntfAdminStatus AlaBfdStatus,
alaBfdIntfDesiredMinTxInterval AlaBfdInterval,
alaBfdIntfReqMinRxInterval AlaBfdInterval,
alaBfdIntfReqMinEchoRxInterval AlaBfdInterval,
alaBfdIntfDetectMult Integer32,
alaBfdIntfAuthPresFlag TruthValue,
alaBfdIntfAuthenticationType INTEGER,
alaBfdIntfIfName SnmpAdminString,
alaBfdIntfOperStatus INTEGER,
alaBfdIntfRowStatus RowStatus
}
alaBfdIntfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the IP Interface for which the BFD session configuration is applied"
::= { alaBfdIntfEntry 1}
alaBfdIntfAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies IP address type values - unknown(0), ipv4(1) or ipv6(2)."
::= { alaBfdIntfEntry 2}
alaBfdIntfAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the IP interface for which BFD session parameters are configured"
::= { alaBfdIntfEntry 3}
alaBfdIntfAdminStatus OBJECT-TYPE
SYNTAX AlaBfdStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative status of the BFD interface."
DEFVAL { disabled }
::= { alaBfdIntfEntry 4}
alaBfdIntfDesiredMinTxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Minimum Desired Tx interval at which packets should be transmitted for
BFD sessions on this interface. The default value for this object is derived
from the value of alaBfdGlobalTxInterval."
::= { alaBfdIntfEntry 5}
alaBfdIntfReqMinRxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Minimum Rx interval at which packets can be received for BFD sessions on
this interface. The default value for this object is derived from the value of
alaBfdGlobalRxInterval."
::= { alaBfdIntfEntry 6}
alaBfdIntfReqMinEchoRxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Minimum Echo Rx interval at which ECHO packets can be received for BFD
sessions on this interface. The default value for this object is derived from the
value of alaBfdGlobalEchoRxInterval."
::= { alaBfdIntfEntry 7}
alaBfdIntfDetectMult OBJECT-TYPE
SYNTAX Integer32 (3..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Detection time multiplier for BFD sessions on this interface. The default
value for this object is derived from the value of alaBfdGlobalDetectMult."
::= { alaBfdIntfEntry 8}
alaBfdIntfAuthPresFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the local system's desire to use authentication on BFD
sessions. If set to true(1), the local system wishes the session to be authenticated
and set to false(0) if not."
DEFVAL { false }
::= { alaBfdIntfEntry 9}
alaBfdIntfAuthenticationType OBJECT-TYPE
SYNTAX INTEGER {
none (1),
simplePassword(2),
keyedMD5(3),
meticulousKeyedMD5(4),
keyedSHA1(5),
meticulousKeyedSHA1(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Authentication Type used for BFD sessions on this interface. This field is valid
only when the Authentication Present bit is set."
DEFVAL { none }
::= { alaBfdIntfEntry 10}
alaBfdIntfIfName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user defined name used to identify the IP interface"
::= { alaBfdIntfEntry 11}
alaBfdIntfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operational status of this BFD IP interface, which is dependent on IP interface
status."
::= { alaBfdIntfEntry 12}
alaBfdIntfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Snmp row status variable for this interface entry."
::= { alaBfdIntfEntry 13}
-- BFD Session Table
-- The BFD Session Table describes BFD session specific information.
alaBfdSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaBfdSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Table describes the BFD sessions for this router instance."
::= { alaBfdObjects 3 }
alaBfdSessEntry OBJECT-TYPE
SYNTAX AlaBfdSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Entry describes the BFD session."
INDEX { alaBfdSessDiscriminator}
::= { alaBfdSessTable 1 }
AlaBfdSessEntry ::= SEQUENCE {
alaBfdSessDiscriminator Unsigned32,
alaBfdSessNeighborAddrType InetAddressType,
alaBfdSessNeighborAddr InetAddress,
alaBfdSessSessionType BITS,
alaBfdSessRemoteDiscr Unsigned32,
alaBfdSessUdpPort InetPortNumber,
alaBfdSessState INTEGER,
alaBfdSessDiag AlaBfdDiag,
alaBfdSessOperMode INTEGER,
alaBfdSessControlPlanIndepFlag TruthValue,
alaBfdSessIfIndex InterfaceIndexOrZero,
alaBfdSessNegotiatedTxInterval AlaBfdInterval,
alaBfdSessNegotiatedRxInterval AlaBfdInterval,
alaBfdSessEchoRxInterval AlaBfdInterval,
alaBfdSessProtocolApps BITS
}
alaBfdSessDiscriminator OBJECT-TYPE
SYNTAX Unsigned32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The systemwide-unique local discriminator that identifies this BFD session."
::= { alaBfdSessEntry 1}
alaBfdSessNeighborAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the IP address type of the neighbor or remote router."
::= { alaBfdSessEntry 2}
alaBfdSessNeighborAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the neighbor or remote router for this BFD session."
::= { alaBfdSessEntry 3}
alaBfdSessSessionType OBJECT-TYPE
SYNTAX BITS {
asynchronous(0),
echo(1),
demand(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bit map object specifies the session type(s) that have been requested by
BFD applications to this session's remote address. One or more applications can
request different types of sessions to the same remote address.
Bits 0 - 2 are currently in use, and if set, indicate that the respective
session type has been requested for this session:
bit 0 - Asynchronous
bit 1 - Echo Function
bit 2 - Demand "
::= { alaBfdSessEntry 4}
alaBfdSessRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The discriminator used by the remote router for this BFD session."
::= { alaBfdSessEntry 5}
alaBfdSessUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique source UDP Port for this BFD session in this router instance."
::= { alaBfdSessEntry 6}
alaBfdSessState OBJECT-TYPE
SYNTAX INTEGER {
adminDown(1),
down(2),
init(3),
up(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol state of the BFD session."
::= { alaBfdSessEntry 7}
alaBfdSessDiag OBJECT-TYPE
SYNTAX AlaBfdDiag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A diagnostic code specifying the local system's reason for the last transition
of the session from up(4)to some other state."
::= { alaBfdSessEntry 8}
alaBfdSessOperMode OBJECT-TYPE
SYNTAX INTEGER {
asyncModeWEchoFunction(1),
asynchModeWOEchoFunction(2),
demandModeWEchoFunction(3),
demandModeWOEchoFunction(4),
echoOnly(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current operating mode of the BFD session."
::= { alaBfdSessEntry 10}
alaBfdSessControlPlanIndepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local system's ability to continue to
function through a disruption of the control plane. Specifically, it is
set to true(1) if the local system's BFD implementation independent of the
control plane. Otherwise, the value is set to false(0)"
::= { alaBfdSessEntry 11}
alaBfdSessIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an ifIndex of the IP interface on which this
BFD session is running. This value can be zero if there are no interface associated
with this BFD session."
::= { alaBfdSessEntry 12}
alaBfdSessNegotiatedTxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in milliseconds, that the local system
will transmit BFD Control packets."
::= { alaBfdSessEntry 13}
alaBfdSessNegotiatedRxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in milliseconds, that the local system
will receive BFD Control packets."
::= { alaBfdSessEntry 14}
alaBfdSessEchoRxInterval OBJECT-TYPE
SYNTAX AlaBfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the minimum echo rx interval, in milliseconds, that the local system
will receive BFD Echo packets."
::= { alaBfdSessEntry 15}
alaBfdSessProtocolApps OBJECT-TYPE
SYNTAX BITS {
vrrp(0),
staticRtg(1),
ospf(2),
bgp(3),
isis(4),
pim(5),
dvmrp(6),
ospf3(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit map object to reflect BFD applications that have requested for detection to
this session's remote address. Bits 0 - 6 are currently in use, and if set,
indicate that the respective application has requested BFD session state event
notifications:
bit 0 - VRRP
bit 1 - STATIC ROUTING (i.e. IP Route Manager)
bit 2 - OSPF
bit 3 - BGP
bit 4 - ISIS
bit 5 - PIM
bit 6 - DVMRP
bit 7 - OSPF3 "
::= { alaBfdSessEntry 16}
-- BFD Session Performance Table
alaBfdSessPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaBfdSessPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies BFD Session performance and statistics."
::= { alaBfdObjects 4 }
alaBfdSessPerfEntry OBJECT-TYPE
SYNTAX AlaBfdSessPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for every BFD Session in this router
instance."
AUGMENTS { alaBfdSessEntry }
::= { alaBfdSessPerfTable 1 }
AlaBfdSessPerfEntry ::= SEQUENCE {
alaBfdSessPerfPktIn Counter64,
alaBfdSessPerfPktOut Counter64,
alaBfdSessPerfEchoOut Counter64,
alaBfdSessPerfEchoIn Counter64,
alaBfdSessPerfUpTime TimeTicks,
alaBfdSessPerfLastSessDownTime TimeTicks,
alaBfdSessPerfLastCommLostDiag AlaBfdDiag,
alaBfdSessPerfSessUpCount Counter64,
alaBfdSessPerfDiscTime TimeTicks
}
alaBfdSessPerfPktIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD packets received for this BFD session."
::= { alaBfdSessPerfEntry 1 }
alaBfdSessPerfPktOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD packets sent for this BFD session."
::= { alaBfdSessPerfEntry 2 }
alaBfdSessPerfEchoOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD Echo packets sent for this BFD session."
::= { alaBfdSessPerfEntry 3 }
alaBfdSessPerfEchoIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD Echo packets received for this BFD session."
::= { alaBfdSessPerfEntry 4 }
alaBfdSessPerfUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system time elapsed since the most recent occasion at which the session became up.
If no such event occured, this object contains a zero value."
::= { alaBfdSessPerfEntry 5 }
alaBfdSessPerfLastSessDownTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system time elapsed since the most recent occasion at which communication
was lost with the remote end (i.e. session was down). If no such event occured,
this object contains a zero value."
::= { alaBfdSessPerfEntry 6 }
alaBfdSessPerfLastCommLostDiag OBJECT-TYPE
SYNTAX AlaBfdDiag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BFD diagnostic code for the last time communication was lost with the remote
end. If no such event occured, this object contains a zero value."
::= { alaBfdSessPerfEntry 7 }
alaBfdSessPerfSessUpCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this session has gone into the Up state since the
router last rebooted."
::= { alaBfdSessPerfEntry 8 }
alaBfdSessPerfDiscTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of system time on the most recent occasion at which any one or more of the
session counters suffered a discontinuity.The relevant counters are the specific
instances associated with this BFD session of any Counter64 object contained in
the BfdSessPerfTable. If no such discontinuities have occurred since the last
re-initialization of the local management subsystem, then this object
contains a zero value."
::= { alaBfdSessPerfEntry 9 }
-- BFD Conformance
alcatelIND1BfdMIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1BfdMIBConformance 1}
alcatelIND1BfdMIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1BfdMIBConformance 2}
-- compliance statements
alcatelIND1BfdMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of BFD."
MODULE
MANDATORY-GROUPS {
alaBfdBasicGroup,
alaBfdIntfCfgGroup,
alaBfdSessGroup,
alaBfdSessPerfGroup
}
::= { alcatelIND1BfdMIBCompliances 1}
-- units of conformance
alaBfdBasicGroup OBJECT-GROUP
OBJECTS {
alaBfdGlobalVersionNumber,
alaBfdGlobalAdminStatus,
alaBfdGlobalTxInterval,
alaBfdGlobalRxInterval,
alaBfdGlobalDetectMult,
alaBfdGlobalEchoRxInterval,
alaBfdGlobalProtocolApps
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the
configuration done for BFD at global level."
::= { alcatelIND1BfdMIBGroups 1}
alaBfdIntfCfgGroup OBJECT-GROUP
OBJECTS {
-- alaBfdIntfIndex,
alaBfdIntfAddr,
alaBfdIntfAddrType,
alaBfdIntfAdminStatus,
alaBfdIntfDesiredMinTxInterval,
alaBfdIntfReqMinRxInterval,
alaBfdIntfReqMinEchoRxInterval,
alaBfdIntfDetectMult,
alaBfdIntfAuthPresFlag,
alaBfdIntfAuthenticationType,
alaBfdIntfIfName,
alaBfdIntfOperStatus,
alaBfdIntfRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the
configuration done for a BFD interface."
::= { alcatelIND1BfdMIBGroups 2}
alaBfdSessGroup OBJECT-GROUP
OBJECTS {
-- alaBfdSessDiscriminator,
alaBfdSessNeighborAddrType,
alaBfdSessNeighborAddr,
alaBfdSessSessionType,
alaBfdSessRemoteDiscr,
alaBfdSessUdpPort,
alaBfdSessState,
alaBfdSessDiag,
alaBfdSessOperMode,
alaBfdSessControlPlanIndepFlag,
alaBfdSessIfIndex,
alaBfdSessNegotiatedTxInterval,
alaBfdSessNegotiatedRxInterval,
alaBfdSessEchoRxInterval,
alaBfdSessProtocolApps
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the BFD session."
::= { alcatelIND1BfdMIBGroups 3}
alaBfdSessPerfGroup OBJECT-GROUP
OBJECTS {
alaBfdSessPerfPktIn,
alaBfdSessPerfPktOut,
alaBfdSessPerfEchoOut,
alaBfdSessPerfEchoIn,
alaBfdSessPerfUpTime,
alaBfdSessPerfLastSessDownTime,
alaBfdSessPerfLastCommLostDiag,
alaBfdSessPerfSessUpCount,
alaBfdSessPerfDiscTime
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the BFD session
performance counters."
::= { alcatelIND1BfdMIBGroups 4}
END