mibs/nokia/aos7/ALCATEL-IND1-CONFIG-MGR-MIB
ALCATEL-IND1-CONFIG-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY,
OBJECT-IDENTITY,
Integer32 FROM SNMPv2-SMI
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
softentIND1Confmgr FROM ALCATEL-IND1-BASE
VirtualOperChassisId FROM ALCATEL-IND1-VIRTUAL-CHASSIS-MIB
;
alcatelIND1ConfigMgrMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { softentIND1Confmgr 1}
alcatelIND1ConfigMgrMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Configuration Manager Subsystem Managed Objects."
::= { alcatelIND1ConfigMgrMIB 1 }
alcatelIND1ConfigMgrMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Configuration Manager Subsystem Conformance Information."
::= { alcatelIND1ConfigMgrMIB 2 }
alcatelIND1ConfigMgrMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Configuration Manager Subsystem Units Of Conformance."
::= { alcatelIND1ConfigMgrMIBConformance 1 }
alcatelIND1ConfigMgrMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Configuration Manager Subsystem Compliance Statements."
::= { alcatelIND1ConfigMgrMIBConformance 2 }
--
-- Configuration Manager
--
configManager OBJECT IDENTIFIER ::= { alcatelIND1ConfigMgrMIBObjects 1 }
configFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..45))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the configuration file to be
read by the device. The file specified
should be present on the device."
DEFVAL { "" }
::= { configManager 1 }
configFileAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
checkSyntaxOnly(2),
apply(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Triggers application of the configuration
file specified by the configInputFileName.
A value of checkSyntax causes configInputFile
to be checked for syntax, with no changes to
device configuration. A value of
checkSyntaxAndApply causes the configInputFile
to be applied to the device configuration.A value
of none indicates no action has been triggered."
DEFVAL { none }
::= { configManager 2 }
configErrorFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the file containing the error
messages generated by the device during file
configuration."
DEFVAL { "" }
::= { configManager 3 }
configFileStatus OBJECT-TYPE
SYNTAX INTEGER {
noneAvail(1),
inProgress(2),
completeNoErrors(3),
completeErrors(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of most recent application of configuration
file to the device."
DEFVAL { noneAvail }
::= { configManager 4 }
configFileMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
verbose(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The verbose mode displays all configuration commands
and errors when the file is applied on the console
screen. Ignored unless set from command line interface."
DEFVAL { none }
::= { configManager 5 }
configTimerFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..45))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the configuration file to be read later
by the device."
DEFVAL { "" }
::= { configManager 6 }
configTimerFileTime OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local time when the configuration file
will be read by the device. This object is
only set if the configInputFile must be applied
at a later time.
The following formats are valid:
MM/DD/YYYY hh:mm
MM/DD/YY hh:mm
MM/DD hh:mm - uses current year if
after current date and time,
next year otherwise.
hh:mm - uses today's date if later
than current time,
tommorow's date otherwise.
where
YY - year (0-38,99)
MM - month (1-12)
DD - day (1-31)
hh - hour (0-23)
mm - minute (0-59)"
DEFVAL { "" }
::= { configManager 7 }
configTimerFileStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
pending(2),
inProgress(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the ASCII configuration
timer."
DEFVAL { idle }
::= { configManager 8 }
configTimerClear OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes the ASCII
configuration timer to be cleared."
DEFVAL { 0 }
::= { configManager 9 }
configSnapshotFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..45))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the configuration snap-shot file
to be generated by the device."
DEFVAL { "" }
::= { configManager 10 }
configSnapshotAction OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes the configuration
snap-shot to be generated by the device."
DEFVAL { 0 }
::= { configManager 11 }
configSnapshotAllSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
all application configuration data to be
included in the snap-shot file generated by
the device."
DEFVAL { 0 }
::= { configManager 12 }
configSnapshotVlanSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Vlan configuration data to be
included in the snap-shot file generated by
the device."
DEFVAL { 0 }
::= { configManager 13 }
configSnapshotSpanningTreeSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Spanning Tree configuration data to be
included in the snap-shot file generated by
the device."
DEFVAL { 0 }
::= { configManager 14 }
configSnapshotQOSSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
QOS configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 15 }
configSnapshotIPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IP configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 16 }
configSnapshotIPXSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IPX configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 17 }
configSnapshotIPMSSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IPMS configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 18 }
configSnapshotAAASelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
AAA configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 19 }
configSnapshotSNMPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
SNMP configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 20 }
configSnapshot8021QSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
802.1Q configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 21 }
configSnapshotLinkAggregateSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
link aggregation configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 22 }
configSnapshotPortMirrorSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
port mirroring configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 23 }
configSnapshotXIPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
proprietary inter-switch protocol configuration
data to be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 24 }
configSnapshotHealthMonitorSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
health monitoring configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 25 }
configSnapshotBootPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
bootp configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 26 }
configSnapshotBridgeSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
source-learning configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 27 }
configSnapshotChassisSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
the chassis configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 28 }
configSnapshotInterfaceSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
ethernet interface configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 29 }
configSnapshotPolicySelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
policy manager configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 30 }
configSnapshotSessionSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
the user-session configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 31 }
configSnapshotServerLoadBalanceSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
server load balancing configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 32 }
configSnapshotSystemServiceSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
system services configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 33 }
configSnapshotVRRPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
VRRP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 34 }
configSnapshotWebSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
web manager configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 35 }
configSnapshotRIPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
RIP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 36 }
configSnapshotOSPFSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
OSPF configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 37 }
configSnapshotBGPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
BGP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 38 }
configSnapshotIPRMSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IPRM routing configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 39 }
configSnapshotIPMRSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IP multicast routing configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 40 }
configSnapshotModuleSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
module configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 41 }
configTechSupportLogAction OBJECT-TYPE
SYNTAX INTEGER {
notSignificant(0),
techSupportBasic(1),
techSupportL2(2),
techSupportL3(3),
techSupportL3Rip(4),
techSupportL3Ipx(5),
techSupportL3Ospf(6),
techSupportL3Bgp(7),
techSupportL3Pimsm(8),
techSupportL3Mroute(9),
techSupportL3Dvmrp(10),
techSupportL3IPv6(11),
techSupportL3RIPng(12),
techSupportL3OSPF3(13),
techSupportL3Isis(14),
techSupportL3Pim6(15),
techSupportL3IPsec(16),
techSupportL3Bfd(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
a tech_support.log file to be created
containing switch information useful to
a technical support group."
DEFVAL { techSupportBasic }
::= { configManager 42 }
configWriteMemory OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
the entire switch snap-shot configuration to
be stored in the boot.cfg file in the
current running directory."
DEFVAL { 0 }
::= { configManager 43 }
configErrorFileMaximum OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of error files which may be
present on a switch. Each time a new error file
is created, all but the newest configErrorFileMaxNum
error files are deleted."
DEFVAL { 1 }
::= { configManager 44 }
configChangeStatus OBJECT-TYPE
SYNTAX INTEGER {
identical(1),
different(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the running configuration with respect
to the saved configuration."
DEFVAL { identical }
::= { configManager 45 }
configSnapshotRDPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
RDP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 46 }
configSnapshotIPv6Select OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IPv6 configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 47 }
configSnapshotRIPngSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
RIPng configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 48 }
configSnapshotAtmSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
ATM configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED."
DEFVAL { 0 }
::= { configManager 49 }
configSnapshotSonetSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Sonet configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED."
DEFVAL { 0 }
::= { configManager 50 }
configSnapshotNTPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
NTP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 51 }
configSnapshotPortMappingSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Port Mapping configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 52 }
configSnapshotOSPF3Select OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
OSPF3 configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 53 }
configWriteMemoryStatus OBJECT-TYPE
SYNTAX INTEGER {
noneAvail(1),
inProgress(2),
completeNoErrors(3),
completeErrors(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of most recent wwrite memory action."
DEFVAL { noneAvail }
::= { configManager 54 }
configSnapshotStackSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
STack Manager configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 55 }
configSnapshotISISSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
ISIS configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 56 }
configSnapshotEOAMSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Ethernet OAM configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 57 }
configSnapshotUDLDSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
UDLD configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 58 }
configSnapshotNETSECSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
NETSEC configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 59 }
configSnapshotIPsecSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
IP Security configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 60 }
configSnapshotBFDSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
BFD configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 61 }
configSnapshotMultiChassisSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
MCM configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 62 }
configSnapshotErpSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
ERP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 63 }
configSnapshotMPLSSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
MPLS configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 64 }
configSnapshotEFMOAMSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
EFMOAM configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 65}
configSnapshotCapabilitySelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
capability manager configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 66 }
configSnapshotVfcSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
VFC configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 67 }
configSnapshotHaVlanSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
HA VLAN configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 68 }
configSnapshotDaUnpSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
DA UNP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 69 }
configSnapshotDHLSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
DHL configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 70 }
configSnapshotMVRPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
MVRP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 71 }
configSnapshotSAASelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
SAA configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 72 }
configSnapshotSPBSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
SPB configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 73 }
configSnapshotSPBIsisSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
SPB ISIS configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 74 }
configSnapshotVirtualChassisSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes VCM configuration
data to be included in the snap-shot file
generated by the device. A set of this object
is only valid in standalone mode"
DEFVAL { 0 }
::= { configManager 75 }
configSnapshotMplsLdpSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
MPLS LDP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 76 }
configSnapshotVCMSpecific OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
VCM configuration data for the chassis
specified by configSnapshotChassisId to
be included in the snap-shot file generated
by the device A set of this object is only
valid in virtual chassis mode."
DEFVAL { 0 }
::= { configManager 77 }
configSnapshotChassisId OBJECT-TYPE
SYNTAX VirtualOperChassisId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object in combination with
configSnapshotVCMSpecific causes
VCM configuration data for the specified
chassis to be included in the snap-shot
file generated by the device. A set of
this object is only valid in virtual
chassis mode."
DEFVAL { 0 }
::= { configManager 78 }
configSnapshotEvbSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
EVB configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 79 }
configConvertConfiguration OBJECT-TYPE
SYNTAX INTEGER {
notSignificant(0),
virtualChassis(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object to virtualChassis is only valid in
standalone mode and causes a virtual chassis snapshot to be
generated from the running configuration. The resulting
vcsetup.cfg and vcboot.cfg files are stored in the directory
specified by configConvertDestinationDirectory. If no directory
is specified the running directory will be used provided the
running directory is not the certified directory."
DEFVAL { notSignificant }
::= { configManager 80 }
configConvertConfigurationStatus OBJECT-TYPE
SYNTAX INTEGER {
noneAvail(1),
inProgress(2),
completeNoErrors(3),
completeErrors(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of most recent convert configuration action."
DEFVAL { noneAvail }
::= { configManager 81 }
configConvertDestinationDirectory OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..45))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination directory for the files created by the action
of setting the configConvertConfiguration object."
DEFVAL { "" }
::= { configManager 82 }
configConvertReload OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object will initiate a reboot of the
switch as part of the configConvertConfiguration
action."
DEFVAL { 0 }
::= { configManager 83 }
configSnapshotAppfpSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Application Finger Print configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 84 }
configSnapshotFipsSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
FIP Snooping configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 85 }
configSnapshotLFPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
LFP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 86 }
configSnapshotPmInterfaceSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Port Manager Interfaceconfiguration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 87 }
configSnapshotAutofabricSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 88 }
configSnapshotDhcpv6RelaySelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
DHCPv6 Relay configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 89 }
configSnapshotSIPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 90 }
configSnapshotOpenflowSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Openflow configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 91 }
configSnapshotWlanSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Wlan configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 92 }
configSnapshotDhcpSrvSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
DhcpSrv configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 93 }
configSnapshotDPISelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Dpi configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 94 }
configSnapshotMsgSrvSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
MsgSrv configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 95 }
configSnapshotAlSrvSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
ActiveLeaseSrv configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 96 }
configSnapshotDhcpv6SrvSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Dhcp6Srv configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 97 }
configSnapshotAGSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
AG configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 98 }
configSnapshotQMRSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
QMR configuration data to be included
in the snap-shot file generated by the
the device."
DEFVAL { 0 }
::= { configManager 99 }
configSnapshotVCSPSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
VCSP configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 100 }
configSnapshotDhcpSnoopingSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
DHCP SNOOPING configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 101 }
configSnapshotAppMonSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Application Monitoring configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 102 }
configSnapshotLbdSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Loopback Detection configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 103 }
configSnapshotVMSnoopSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
VM Snooping configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 104 }
configSnapshotPppoeIaSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
PPPoE-IA configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 105}
configSnapshotPmPortViolationSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Port Violation configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 106}
configSnapshotLanPowerSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Lan Power configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 107}
configSnapshotPVLANSelect OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object causes
Private VLAN(PVLAN) configuration data to
be included in the snap-shot file generated
by the device."
DEFVAL { 0 }
::= { configManager 108 }
--
-- Compliance Statements
--
alcatelIND1ConfigMgrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Configuration Manager Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
configFileGroup,
configTimerFileGroup,
configSnapshotGroup,
configTechSupportLogGroup,
configWriteMemoryGroup,
configConvertConfigurationGroup
}
::= { alcatelIND1ConfigMgrMIBCompliances 1 }
--
-- Units of Conformance
--
configFileGroup OBJECT-GROUP
OBJECTS
{
configFileName,
configFileAction,
configErrorFileName,
configFileStatus,
configFileMode,
configErrorFileMaximum,
configChangeStatus
}
STATUS current
DESCRIPTION
"Collection of objects for file configuration."
::= { alcatelIND1ConfigMgrMIBGroups 1}
configTimerFileGroup OBJECT-GROUP
OBJECTS
{
configTimerFileName,
configTimerFileTime,
configTimerFileStatus,
configTimerClear,
configSnapshotFileName
}
STATUS current
DESCRIPTION
"Collection of objects for timer file configuration."
::= { alcatelIND1ConfigMgrMIBGroups 2}
configSnapshotGroup OBJECT-GROUP
OBJECTS
{
configSnapshotAction,
configSnapshotAllSelect,
configSnapshotVCMSpecific,
configSnapshotChassisId,
configSnapshotVlanSelect,
configSnapshotSpanningTreeSelect,
configSnapshotQOSSelect,
configSnapshotIPSelect,
configSnapshotIPXSelect,
configSnapshotIPMSSelect,
configSnapshotAAASelect,
configSnapshotSNMPSelect,
configSnapshot8021QSelect,
configSnapshotLinkAggregateSelect,
configSnapshotPortMirrorSelect,
configSnapshotXIPSelect,
configSnapshotHealthMonitorSelect,
configSnapshotBootPSelect,
configSnapshotBridgeSelect,
configSnapshotChassisSelect,
configSnapshotInterfaceSelect,
configSnapshotPolicySelect,
configSnapshotSessionSelect,
configSnapshotServerLoadBalanceSelect,
configSnapshotSystemServiceSelect,
configSnapshotVRRPSelect,
configSnapshotWebSelect,
configSnapshotRIPSelect,
configSnapshotOSPFSelect,
configSnapshotBGPSelect,
configSnapshotIPRMSelect,
configSnapshotIPMRSelect,
configSnapshotModuleSelect,
configSnapshotRDPSelect,
configSnapshotIPv6Select,
configSnapshotRIPngSelect,
configSnapshotAtmSelect,
configSnapshotSonetSelect,
configSnapshotNTPSelect,
configSnapshotPortMappingSelect,
configSnapshotOSPF3Select,
configSnapshotStackSelect,
configWriteMemoryStatus,
configSnapshotISISSelect,
configSnapshotEOAMSelect,
configSnapshotUDLDSelect,
configSnapshotNETSECSelect,
configSnapshotIPsecSelect,
configSnapshotBFDSelect,
configSnapshotMultiChassisSelect,
configSnapshotEFMOAMSelect,
configSnapshotMPLSSelect,
configSnapshotErpSelect,
configSnapshotCapabilitySelect,
configSnapshotVfcSelect,
configSnapshotHaVlanSelect,
configSnapshotDaUnpSelect,
configSnapshotDHLSelect,
configSnapshotMVRPSelect,
configSnapshotSAASelect,
configSnapshotSPBSelect,
configSnapshotSPBIsisSelect,
configSnapshotVirtualChassisSelect,
configSnapshotMplsLdpSelect,
configSnapshotEvbSelect,
configSnapshotAppfpSelect,
configSnapshotFipsSelect,
configSnapshotLFPSelect,
configSnapshotPmInterfaceSelect,
configSnapshotAutofabricSelect,
configSnapshotDhcpv6RelaySelect,
configSnapshotSIPSelect,
configSnapshotOpenflowSelect,
configSnapshotWlanSelect,
configSnapshotDhcpSrvSelect,
configSnapshotDPISelect,
configSnapshotMsgSrvSelect,
configSnapshotAlSrvSelect,
configSnapshotDhcpv6SrvSelect,
configSnapshotAGSelect,
configSnapshotQMRSelect,
configSnapshotVCSPSelect,
configSnapshotDhcpSnoopingSelect,
configSnapshotAppMonSelect,
configSnapshotVMSnoopSelect,
configSnapshotLbdSelect,
configSnapshotPppoeIaSelect,
configSnapshotPmPortViolationSelect,
configSnapshotLanPowerSelect,
configSnapshotPVLANSelect
}
STATUS current
DESCRIPTION
"Collection of objects for snapshot configuration."
::= { alcatelIND1ConfigMgrMIBGroups 3}
configTechSupportLogGroup OBJECT-GROUP
OBJECTS
{
configTechSupportLogAction
}
STATUS current
DESCRIPTION
"Collection of objects for technical support log file."
::= { alcatelIND1ConfigMgrMIBGroups 4}
configWriteMemoryGroup OBJECT-GROUP
OBJECTS
{
configWriteMemory
}
STATUS current
DESCRIPTION
"Collection of objects for write memory."
::= { alcatelIND1ConfigMgrMIBGroups 5}
configConvertConfigurationGroup OBJECT-GROUP
OBJECTS
{
configConvertConfiguration,
configConvertConfigurationStatus,
configConvertDestinationDirectory,
configConvertReload
}
STATUS current
DESCRIPTION
"Collection of objects for write memory."
::= { alcatelIND1ConfigMgrMIBGroups 6}
END