mibs/nokia/aos7/ALCATEL-IND1-IPRMV6-MIB
ALCATEL-IND1-IPRMV6-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32
FROM SNMPv2-SMI
RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
IANAipRouteProtocol
FROM IANA-RTPROTO-MIB
Ipv6Address, Ipv6IfIndex, Ipv6IfIndexOrZero
FROM IPV6-TC
routingIND1Iprm
FROM ALCATEL-IND1-BASE
AlaIprmStaticRouteTypes, AlaIprmAdminStatus
FROM ALCATEL-IND1-IPRM-MIB;
alcatelIND1IPRMV6MIB MODULE-IDENTITY
LAST-UPDATED "201309230000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of IPRMv6 global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2010 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201002220000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Iprm 2 }
alcatelIND1IPRMV6MIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPRMV6MIB 1 }
alaIprmV6Config OBJECT IDENTIFIER ::= { alcatelIND1IPRMV6MIBObjects 1 }
-- Textual Conventions
AlaIprmV6RtPrefType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to define the various types of IPv6 routes along with their
route preference values"
SYNTAX INTEGER {
local(1),
static(2),
ospf(3),
rip(4),
bgpExternal(5),
bgpInternal(6),
isisl1(7),
isisl2(8),
import(9)
}
-- IPv6 Route Table
alaIprmV6RouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmV6RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPRM's IPv6 Routing table. This table contains
an entry for each valid IPv6 unicast route that
can be used for packet forwarding determination.
It is for display purposes only."
::= { alaIprmV6Config 1 }
alaIprmV6RouteEntry OBJECT-TYPE
SYNTAX AlaIprmV6RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A routing entry."
INDEX {
alaIprmV6RouteDest,
alaIprmV6RoutePfxLength,
alaIprmV6RouteNextHop,
alaIprmV6RouteProtocol,
alaIprmV6RouteIfIndex
}
::= { alaIprmV6RouteTable 1 }
AlaIprmV6RouteEntry ::=
SEQUENCE {
alaIprmV6RouteDest Ipv6Address,
alaIprmV6RoutePfxLength Integer32,
alaIprmV6RouteNextHop Ipv6Address,
alaIprmV6RouteProtocol IANAipRouteProtocol,
alaIprmV6RouteIfIndex Ipv6IfIndex,
alaIprmV6RouteMetric Unsigned32,
alaIprmV6RouteValid TruthValue
}
alaIprmV6RouteDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route."
::= { alaIprmV6RouteEntry 1 }
alaIprmV6RoutePfxLength OBJECT-TYPE
SYNTAX Integer32(0..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { alaIprmV6RouteEntry 2 }
alaIprmV6RouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next
system en route; otherwise, ::0
('00000000000000000000000000000000'H in ASN.1
string representation)."
::= { alaIprmV6RouteEntry 3 }
alaIprmV6RouteProtocol OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol that this route was learned from"
::= { alaIprmV6RouteEntry 4 }
alaIprmV6RouteIfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached."
::= { alaIprmV6RouteEntry 5 }
alaIprmV6RouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing metric for this route. The
semantics of this metric are determined by the
routing protocol specified in the route's
ipv6RouteProtocol value."
::= { alaIprmV6RouteEntry 6 }
alaIprmV6RouteValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this value is true(1) IPRM believes the
route is being used. If this value is false(2),
the route is currently not being used and is
considered a backup route."
::= { alaIprmV6RouteEntry 7 }
-- IPRM's IPv6 Static Routes Table
alaIprmV6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmV6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of IPv6 Static Routes."
::= { alaIprmV6Config 2 }
alaIprmV6StaticRouteEntry OBJECT-TYPE
SYNTAX AlaIprmV6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 static route entered by the user"
INDEX {
alaIprmV6StaticRouteDest,
alaIprmV6StaticRoutePfxLength,
alaIprmV6StaticRouteNextHop,
alaIprmV6StaticRouteIfIndex
}
::= { alaIprmV6StaticRouteTable 1 }
AlaIprmV6StaticRouteEntry ::=
SEQUENCE {
alaIprmV6StaticRouteDest Ipv6Address,
alaIprmV6StaticRoutePfxLength Integer32,
alaIprmV6StaticRouteNextHop Ipv6Address,
alaIprmV6StaticRouteIfIndex Ipv6IfIndexOrZero,
alaIprmV6StaticRouteMetric Unsigned32,
alaIprmV6StaticRouteStatus RowStatus,
alaIprmV6StaticRouteTag Unsigned32,
alaIprmV6StaticRouteName SnmpAdminString,
alaIprmV6StaticRouteBfdStatus AlaIprmAdminStatus,
alaIprmV6StaticRouteType AlaIprmStaticRouteTypes
}
alaIprmV6StaticRouteDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this static route.
This object may not take a multicast address value."
::= { alaIprmV6StaticRouteEntry 1 }
alaIprmV6StaticRoutePfxLength OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { alaIprmV6StaticRouteEntry 2 }
alaIprmV6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address of the next hop towards the
destination."
::= { alaIprmV6StaticRouteEntry 3 }
alaIprmV6StaticRouteIfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached."
::= { alaIprmV6StaticRouteEntry 4 }
alaIprmV6StaticRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing metric for this route. The lower the
value, the higher the priority for the static
route."
DEFVAL { 1 }
::= { alaIprmV6StaticRouteEntry 5 }
alaIprmV6StaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of static
routes."
::= { alaIprmV6StaticRouteEntry 6 }
alaIprmV6StaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Tag associated with route."
::= { alaIprmV6StaticRouteEntry 7 }
alaIprmV6StaticRouteName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A comment associated with the static route."
::= { alaIprmV6StaticRouteEntry 8 }
alaIprmV6StaticRouteBfdStatus OBJECT-TYPE
SYNTAX AlaIprmAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For enabling or disabling the BFD status on this static route."
::= { alaIprmV6StaticRouteEntry 9 }
alaIprmV6StaticRouteType OBJECT-TYPE
SYNTAX AlaIprmStaticRouteTypes
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of static route."
::= { alaIprmV6StaticRouteEntry 10 }
-- IPRM's IPV6 Route Preference Table
alaIprmV6RtPrefTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmV6RtPrefTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the route preference values for
various types of IPv6 routes handled by IPRM."
::= { alaIprmV6Config 3 }
alaIprmV6RtPrefTableEntry OBJECT-TYPE
SYNTAX AlaIprmV6RtPrefTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is in this table for each IPv6 route preference type."
INDEX {
alaIprmV6RtPrefEntryType
}
::= { alaIprmV6RtPrefTable 1 }
AlaIprmV6RtPrefTableEntry ::= SEQUENCE {
alaIprmV6RtPrefEntryType AlaIprmV6RtPrefType,
alaIprmV6RtPrefEntryValue Integer32
}
alaIprmV6RtPrefEntryType OBJECT-TYPE
SYNTAX AlaIprmV6RtPrefType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of route (associated with a route preference value)"
::= { alaIprmV6RtPrefTableEntry 1 }
alaIprmV6RtPrefEntryValue OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route preference value used for this type of route."
::= { alaIprmV6RtPrefTableEntry 2 }
-- Route Leaking Export route-map
alaIprmV6ExportRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A route-map index representing the route-map used to filter
IPv6 routes exported to the Global Route Table. A value of -1
indicates no routes should be exported. A value of 0 indicates
all routes should be exported. Otherwise, the value is the
route-map index to use for filtering."
::= { alaIprmV6Config 4 }
-- Route Leaking Export All route-map
alaIprmV6ExportToAllVrfsRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to export IPv6 routes to all other VRFs that don't already have
an entry in the Import Vrf Table. The object is a route-map index
representing the route-map used to filter the exported routes.
A value of -1 indicates no routes should be exported. A value of 0
indicates all routes should be exported. Otherwise, the value is
the route-map index to use for filtering."
::= { alaIprmV6Config 5 }
-- Route Leaking Import Vrf Table
alaIprmV6ImportVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmV6ImportVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies VRFs to import IPv6 routes from."
::= { alaIprmV6Config 6 }
alaIprmV6ImportVrfEntry OBJECT-TYPE
SYNTAX AlaIprmV6ImportVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for each VRF
to import IPv6 routes from."
INDEX {
alaIprmV6ImportVrfName
}
::= { alaIprmV6ImportVrfTable 1 }
AlaIprmV6ImportVrfEntry ::= SEQUENCE {
alaIprmV6ImportVrfName SnmpAdminString,
alaIprmV6ImportVrfRouteMap Integer32,
alaIprmV6ImportVrfRowStatus RowStatus
}
alaIprmV6ImportVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the VRF that IPv6 routes should be imported from. An
empty string indicates the default VRF."
::= { alaIprmV6ImportVrfEntry 1 }
alaIprmV6ImportVrfRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A route-map index representing the route-map used to filter
IPv6 imported routes. A value of 0 indicates all IPv6 routes
that have been exported by the specified VRF should be imported."
::= { alaIprmV6ImportVrfEntry 2 }
alaIprmV6ImportVrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { alaIprmV6ImportVrfEntry 3 }
-- BFD status for all static routes
alaIprmV6StaticAllBfd OBJECT-TYPE
SYNTAX AlaIprmAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable/disable the BFD state on all IPv6 static routes."
DEFVAL { disabled }
::= { alaIprmV6Config 7 }
-- conformance information
alcatelIND1IPRMV6MIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPRMV6MIB 2 }
alcatelIND1IPRMV6MIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1IPRMV6MIBConformance 1 }
alcatelIND1IPRMV6MIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1IPRMV6MIBConformance 2 }
-- compliance statements
alaIprmV6Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running IPRM
and implementing the ALCATEL-IND1-IPRMV6 MIB."
MODULE -- this module
MANDATORY-GROUPS { alaIprmV6ConfigMIBGroup }
::= { alcatelIND1IPRMV6MIBCompliances 1 }
-- units of conformance
alaIprmV6ConfigMIBGroup OBJECT-GROUP
OBJECTS { alaIprmV6RouteMetric, alaIprmV6RouteValid,
alaIprmV6StaticRouteMetric, alaIprmV6StaticRouteStatus,
alaIprmV6StaticRouteTag, alaIprmV6StaticRouteName,
alaIprmV6StaticRouteBfdStatus, alaIprmV6StaticRouteType,
alaIprmV6RtPrefEntryValue, alaIprmV6ExportRouteMap,
alaIprmV6ExportToAllVrfsRouteMap, alaIprmV6ImportVrfRouteMap,
alaIprmV6ImportVrfRowStatus, alaIprmV6StaticAllBfd
}
STATUS current
DESCRIPTION
"A collection of objects to support management of global
configuration parameters of the IPRM Module supporting IPv6 routes."
::= { alcatelIND1IPRMV6MIBGroups 1 }
END