mibs/nokia/aos7/ALCATEL-IND1-MAC-ADDRESS-MIB
ALCATEL-IND1-MAC-ADDRESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
OBJECT-IDENTITY,
NOTIFICATION-TYPE,
MODULE-IDENTITY,
Integer32, Unsigned32 FROM SNMPv2-SMI
ifIndex FROM IF-MIB
vlanNumber FROM ALCATEL-IND1-VLAN-MGR-MIB
MacAddress,
RowStatus,
TEXTUAL-CONVENTION FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
dot1qVlanIndex FROM Q-BRIDGE-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
softentIND1MacAddress FROM ALCATEL-IND1-BASE;
alcatelIND1MacAddressMIB MODULE-IDENTITY
LAST-UPDATED "201005130000Z"
ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the MIB module for
address learning mac addresses entity.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201005130000Z"
DESCRIPTION
"Fixed the Notifications to use MIB Module OID.0 as Notifications root."
REVISION "200704030000Z"
DESCRIPTION
"The MIB module for Source Learning Mac Address entity."
::= { softentIND1MacAddress 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Hook into the Alcatel Tree
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1MacAddressMIBNotifications OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For MacAddress MIB Subsystem Notifications."
::= { alcatelIND1MacAddressMIB 0 }
alcatelIND1MacAddressMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Source Learning Module MIB Subsystem Managed Objects."
::= { alcatelIND1MacAddressMIB 1 }
alcatelIND1MacAddressMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Source Learning Module MIB Subsystem Conformance Information."
::= { alcatelIND1MacAddressMIB 2 }
alcatelIND1MacAddressMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Source Learning Module MIB Subsystem Units of Conformance."
::= { alcatelIND1MacAddressMIBConformance 1 }
alcatelIND1MacAddressMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Source Learning Module MIB Subsystem Compliance Statements."
::= { alcatelIND1MacAddressMIBConformance 2 }
--
--textual conventions
--
MacAddressProtocolType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"Protocol value should be displayed in hex format"
SYNTAX Integer32 (0..2147483647)
--
-- Source Learning Common Definitions
--
-- Layer 2 Mac Address Aging Mib Table
slMacAddressAgingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlMacAddressAgingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of the timeout for those learned mac addresses and
configured as deleted_on_timeout addresses."
::= { alcatelIND1MacAddressMIBObjects 2 }
slMacAddressAgingEntry OBJECT-TYPE
SYNTAX SlMacAddressAgingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the aging time for some specific vlan.
For creation of the aging time, If the vlan Id is specified, then
the aging time value will be applied to those mac addresses in
that vlan. Otherwise, the aging time will be applied to all of
the mac addresses throughout the vlans."
INDEX { dot1qVlanIndex }
::= { slMacAddressAgingTable 1 }
SlMacAddressAgingEntry ::=
SEQUENCE {
slMacAgingValue
Integer32,
slMacAgingRowStatus
RowStatus
}
slMacAgingValue OBJECT-TYPE
SYNTAX Integer32 (10..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the value of mac address aging time."
DEFVAL { 300 }
::= { slMacAddressAgingEntry 1 }
slMacAgingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting the aging time."
::= { slMacAddressAgingEntry 2 }
-- Source Learning Global Configuration parameters
slDistributedMacMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Distributed MAC Mode.
When changed, the user must save the current
configuration and reboot the switch for change
to take effect."
DEFVAL { disable }
::= { alcatelIND1MacAddressMIBObjects 5 }
--layer 2 Mac Address Port Learning Table*********************
slMacLearningControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlMacLearningControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the control information about the mac learning on ports"
::= { alcatelIND1MacAddressMIBObjects 7}
slMacLearningControlEntry OBJECT-TYPE
SYNTAX SlMacLearningControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table provides the control information about the mac learning on ports"
INDEX { ifIndex }
::= { slMacLearningControlTable 1}
SlMacLearningControlEntry ::=
SEQUENCE {
slMacLearningControlStatus INTEGER
}
slMacLearningControlStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of mac learning on port."
DEFVAL { enabled }
::= { slMacLearningControlEntry 1}
--layer 2 Mac Address VLAN Learning Table*********************
slMacLearningVlanControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlMacLearningVlanControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the control information about the mac learning on ports"
::= { alcatelIND1MacAddressMIBObjects 10}
slMacLearningVlanControlEntry OBJECT-TYPE
SYNTAX SlMacLearningVlanControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table provides the control information about the mac learning on ports"
INDEX { vlanNumber }
::= { slMacLearningVlanControlTable 1}
SlMacLearningVlanControlEntry ::=
SEQUENCE {
slMacLearningVlanControlStatus INTEGER
}
slMacLearningVlanControlStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of mac learning on port."
DEFVAL { enabled }
::= { slMacLearningVlanControlEntry 1}
--layer 2 Mac Address Global Table*********************
alaSlMacAddressGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSlMacAddressGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC addresses from both Vlan, VPLS, SPBM or EVB domain.
This table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
in the MAC address table, and those dynamic learned addresses
which can be viewed and deleted."
::= { alcatelIND1MacAddressMIBObjects 8 }
alaSlMacAddressGlobalEntry OBJECT-TYPE
SYNTAX AlaSlMacAddressGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defninition of the Mac Addresses entries for which the switch
has information.
For creation of a Mac Address in VLAN domain, the following fields in
slMacAddressGlobalEntry are required:
slMacDomain
slOriginId - IfIndex
slServiceId - Vlan ID
slMacAddressGbl
slMacAddressGblManagement
slMacAddressGblDisposition
slMacAddressGblRowStatus: must be set last
Dynamic mac addresses can not be created manually.
For creation of Mac Address in VPLS domain, following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblRowStatus: must be set last
Dynamic mac addresses can not be created manually.
For creation of Mac Address in SPBM domain, following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - SPBM Service ID
slSvcISID - SPBM I-SID Service Identifier
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblRowStatus: must be set last
Dynamic mac addresses can not be created manually.
For creation of Mac Address in EVB domain, following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP
slServiceId - SPBM Service ID
slSvcISID - SPBM I-SID Service Identifier
slOriginId - SAP - PortId;
slSubId - SAP - VlanId;
slMacAddressGbl
slMacAddressGblRowStatus: must be set last
Dynamic mac addresses can not be created manually.
For deletion of a Mac Address in VLAN domain, the following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slOriginId - IfIndex
slServiceId - Vlan ID
slMacAddressGbl
slMacAddressGblManagement
slMacAddressGblRowStatus: must be set last
For deletion of a Mac Address in VPLS based, following fileds in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblRowStatus: must be set last
For deletion of a Mac Address in SPBM based, following fileds in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slSvcISID - SPBM I-SID Service Identifier
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblRowStatus: must be set last
For deletion of a Mac Address in EVB based, following fileds in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP
slServiceId - VPLS Service ID
slSvcISID - SPBM I-SID Service Identifier
slOriginId - SAP - PortId;
slSubId - SAP - VlanId;
slMacAddressGbl
slMacAddressGblRowStatus: must be set last
"
INDEX {slMacDomain, slLocaleType, slOriginId, slServiceId, slSubId, slMacAddressGbl}
::= {alaSlMacAddressGlobalTable 1 }
AlaSlMacAddressGlobalEntry ::= SEQUENCE
{
slMacDomain INTEGER,
slLocaleType INTEGER,
slOriginId Integer32,
slServiceId Integer32,
slSubId Integer32,
slMacAddressGbl MacAddress,
slMacAddressGblManagement INTEGER,
slMacAddressGblDisposition INTEGER,
slMacAddressGblRowStatus RowStatus,
slMacAddressGblProtocol MacAddressProtocolType,
slMacAddressGblGroupField Unsigned32,
slSvcISID Integer32,
slVxLanVnID Unsigned32
}
slMacDomain OBJECT-TYPE
SYNTAX INTEGER {
all(0),
vlan(1),
vpls(2),
spbm(3),
evb(4),
local(5),
vxlan(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"* This object indicates whether this MAC is learned on Vlan, VPLS,
SPBM, VxLan,Local,EVB domain.
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then the default -all(0)- value will be expected;
* To program a static MAC address, this field must be specified with
values other than -all(0)-"
DEFVAL { all }
::= {alaSlMacAddressGlobalEntry 1 }
slLocaleType OBJECT-TYPE
SYNTAX INTEGER {
default(0),
sap(1),
sBind(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"* This field is used in VPLS, SPBM or EVB domain. This field
will be -default(0)- for VLAN domain.
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then the -default(0)- value will be expected;
* To program a MAC address on Vlan domain, this field will be
-default(0)-; To program a MAC address on non VLAN domain, this field
must be specfied with values other than -default(0)-"
DEFVAL { default }
::= {alaSlMacAddressGlobalEntry 2}
slOriginId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"* This field should be ifIndex for MAC address from Vlan domain, and
also ifindex for SAP from VPLS, SPBM & EVB, domain;
* This field should be the SDP_ID for MAC address from sBind of VPLS and
SPBM domain;
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then value `0` will be expected;
* To program a static MAC address, this field must be specified with
values within the range (1..2147483647) spcified"
::= {alaSlMacAddressGlobalEntry 3}
slServiceId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" * This field should be the VLAN ID for MAC learnt from VLAN domain;
* This field should be the Service ID for MAC learnt from VPLS, SPB, and
EVB domain;
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then value `0` will be expected;
* To program a static MAC address, this field must be specified with
values within the range (1..32767) spcified"
::= {alaSlMacAddressGlobalEntry 4 }
slSubId OBJECT-TYPE
SYNTAX Integer32 (0 .. 2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" * This field is used in VPLS, SPBM, and EVB domain only. This field
should be the EncapId for SAP, and VCID for SBIND.
* If this MAC is from SAP, then this field should be the VLANID (1 ..4096);
* If this MAC is from SDP, then this field should be the SvcId (1 .. 32767);
* Since we may need to support QinQ (OVlan and IVlan), this field
will be partitioned into 2 16 bits values, upper 16 bits will be
Ovlan and lower 16 bits will be IVlan. If neither OVlan or IVlan
is specified, then 0xFFFF will be expected.
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then value `0` will be expected;
* To program a static MAC address, this field must be specified with values within range
specified"
::= {alaSlMacAddressGlobalEntry 5}
slMacAddressGbl OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" * The MAC address for this entry.
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then value `FF:FF:FF:FF:FF:FF` will be
expected, then all MAC addresses will be flushed.
* To program a static MAC address, this field must be specified
* with valid MAC address"
::= {alaSlMacAddressGlobalEntry 6 }
slMacAddressGblManagement OBJECT-TYPE
SYNTAX INTEGER {
permanent(1),
deleteOnReset(2),
deleteOnTimeout(3),
learned(4),
staticMulticast(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(3) - this entry is currently
in use and will remain so until it is aged
out.
learned(4) - this entry is currently in use
and will remain so until it is aged out.
staticMulticast(5) - this entry is only applicable
to multicast destination addresses"
DEFVAL { permanent }
::= {alaSlMacAddressGlobalEntry 7 }
slMacAddressGblDisposition OBJECT-TYPE
SYNTAX INTEGER {
bridging(1),
filtering(2),
quarantined(3),
hostIntegrity(4),
userNetworkProf(5),
servicing(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the disposition of the entry.
bridging(1) - this entry is currently in use for bridging.
filtering(2) - this entry is currently in use for filtering.
quarantined(3) - this entry is currently in use for quarantined mac.
hostIntegritycheck(4) - the entry is currently under host integrity checking.
userNetworkProf(5) - the entry is currently under user network profile Qos.
servicing(6) - the entry is currently in use in service domain.
"
DEFVAL { bridging }
::= {alaSlMacAddressGlobalEntry 8 }
slMacAddressGblRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting the mac address."
::= {alaSlMacAddressGlobalEntry 9 }
slMacAddressGblProtocol OBJECT-TYPE
SYNTAX MacAddressProtocolType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the protocol associated with
a mac address."
::= {alaSlMacAddressGlobalEntry 10}
slMacAddressGblGroupField OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" "
::= {alaSlMacAddressGlobalEntry 11 }
slSvcISID OBJECT-TYPE
SYNTAX Integer32 (0 | 256..16777214)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" * This field is used in SPBM domain only. This field should be the
ISID ID of MAC learnt in SPBM domain;
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then value `-1` will be expected;
* To program a static MAC address, this field may or may not
sepcified as well. If not specified, then value `0` will be expected;
If this field is specified, then the values must be within the
range (256..16777214)"
::= {alaSlMacAddressGlobalEntry 12 }
slVxLanVnID OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" * This field is used in VXLAN domain only. This field is
VNID of VXLAN domain service;
* To flush a MAC or MACs, this field may or may not be specified. If this
field is not specified, then value `-1` will be expected;"
::= {alaSlMacAddressGlobalEntry 13 }
-- ------------------------------------------------------------------------
-- Following table provides number of MAC addresses count for
-- VPLS based MAC addresses currently in CMM FDB.
-- ------------------------------------------------------------------------
--
-- slMacAddrCountInfoTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SlMacAddrCountInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Definition of the Mac Addresses count for VPLS MAC addresses"
-- ::= {alcatelIND1MacAddressMIBObjects 9 }
--
--slMacAddrCountInfoEntry OBJECT-TYPE
-- SYNTAX SlMacAddrCountInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Definition of the Mac Addresses count for VPLS MAC addresses"
-- AUGMENTS {slMacAddressGlobalEntry}
-- ::= {slMacAddrCountInfoTable 1}
--
--SlMacAddrCountInfoEntry ::= SEQUENCE
--{
-- slStaticMacCount Integer32,
-- slDynamicMacCount Integer32
--}
--
--slStaticMacCount OBJECT-TYPE
-- SYNTAX Integer32 (1..2147483647)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object contains the MAC address count for Static configured MACs"
-- ::= {slMacAddrCountInfoEntry 1 }
--
--slDynamicMacCount OBJECT-TYPE
-- SYNTAX Integer32 (1..2147483647)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object contains the MAC address count for dynamic learned MACs"
-- ::= {slMacAddrCountInfoEntry 2 }
--
--
--
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1MacAddressMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for source learning."
MODULE
MANDATORY-GROUPS
{
slMacAddressGroup,
slMacAgingGroup,
slMacGeneralGroup,
slMacLearningGroup,
slMacVlanLearningGroup
}
::= { alcatelIND1MacAddressMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
slMacAddressGroup OBJECT-GROUP
OBJECTS
{
slMacAddressGblManagement,
slMacAddressGblDisposition,
slMacAddressGblRowStatus,
slMacAddressGblProtocol,
slMacAddressGblGroupField,
slSvcISID,
slVxLanVnID
}
STATUS current
DESCRIPTION
"Collection of objects for management of source learning Mac addresses."
::= { alcatelIND1MacAddressMIBGroups 1 }
slMacAgingGroup OBJECT-GROUP
OBJECTS
{
slMacAgingValue,
slMacAgingRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of source learning Mac addresses aging-time."
::= { alcatelIND1MacAddressMIBGroups 2 }
slMacGeneralGroup OBJECT-GROUP
OBJECTS
{
slDistributedMacMode
}
STATUS current
DESCRIPTION
"Collection of general sl objects."
::= { alcatelIND1MacAddressMIBGroups 3 }
slMacLearningGroup OBJECT-GROUP
OBJECTS
{
slMacLearningControlStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of enabling or disabling source learning on the ports."
::= { alcatelIND1MacAddressMIBGroups 4 }
slMacVlanLearningGroup OBJECT-GROUP
OBJECTS
{
slMacLearningVlanControlStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of enabling or disabling source learning on the vlans."
::= { alcatelIND1MacAddressMIBGroups 5 }
-- END ***********************
END