mibs/nokia/aos7/ALCATEL-IND1-OPENFLOW-MIB
ALCATEL-IND1-OPENFLOW-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
softentIND1OpenflowMIB
FROM ALCATEL-IND1-BASE
;
alcatelIND1OpenflowMIB MODULE-IDENTITY
LAST-UPDATED "201403260000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Openflow for OS6900 Product Line.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201403260000Z"
DESCRIPTION
"The latest version of this MIB Module."
REVISION "201410080000Z"
DESCRIPTION
"alaOpenflowLogicalSwitchLearnedMacUpdate is not limited to OS6900 devices"
::= { softentIND1OpenflowMIB 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Hook into the Alcatel Tree
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1OpenflowMIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1OpenflowMIB 0 }
alcatelIND1OpenflowMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
" Alcatel-Lucent Openflow Managed Objects."
::= { alcatelIND1OpenflowMIB 1 }
alcatelIND1OpenflowMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
" Alcatel-Lucent Openflow Conformance Information."
::= { alcatelIND1OpenflowMIB 2 }
alaOpenflowGlobalConfigObjects OBJECT IDENTIFIER ::= { alcatelIND1OpenflowMIBObjects 1 }
alaOpenflowGlobalBackoffMax OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Alcatel-Lucent Openflow maximum back-off time in seconds for controller connection attempts."
DEFVAL { 60 }
::= { alaOpenflowGlobalConfigObjects 1 }
alaOpenflowGlobalIdleProbeTimeout OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Alcatel-Lucent Openflow idle probe timeout value in seconds. If set to 0, idle probing is disabled."
DEFVAL { 15 }
::= { alaOpenflowGlobalConfigObjects 2 }
-- Openflow LogicalSwitch Table
alaOpenflowLogicalSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaOpenflowLogicalSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for each Logical Switch."
::= { alcatelIND1OpenflowMIBObjects 2 }
alaOpenflowLogicalSwitchEntry OBJECT-TYPE
SYNTAX AlaOpenflowLogicalSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Openflow Logical Switches. "
INDEX { alaOpenflowLogicalSwitch }
::= { alaOpenflowLogicalSwitchTable 1 }
AlaOpenflowLogicalSwitchEntry ::= SEQUENCE
{
alaOpenflowLogicalSwitch SnmpAdminString,
alaOpenflowLogicalSwitchAdminState INTEGER,
alaOpenflowLogicalSwitchMode INTEGER,
alaOpenflowLogicalSwitchVersions BITS,
alaOpenflowLogicalSwitchVlan Integer32,
alaOpenflowLogicalSwitchControllerCount Integer32,
alaOpenflowLogicalSwitchInterfaceCount Integer32,
alaOpenflowLogicalSwitchFlowCount Integer32,
alaOpenflowLogicalSwitchRowStatus RowStatus,
alaOpenflowLogicalSwitchLearnedMacUpdate INTEGER,
alaOpenflowLogicalSwitchProbeTime Integer32,
alaOpenflowLogicalSwitchFailureDetectTime Integer32,
alaOpenflowLogicalSwitchDPID OCTET STRING,
alaOpenflowLogicalSwitchTableMissAction INTEGER,
alaOpenflowLogicalSwitchTCPBufferSizeTx Unsigned32,
alaOpenflowLogicalSwitchTCPBufferSizeRx Unsigned32
}
alaOpenflowLogicalSwitch OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Logical Switch Name."
::= { alaOpenflowLogicalSwitchEntry 1 }
alaOpenflowLogicalSwitchAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Logical Switch Admin State. Enable or disable the Logical Switch.
When disabled, all controllers for the Logical Switch will be
operationally disabled and flows added by those controllers will
be removed."
DEFVAL { enabled }
::= { alaOpenflowLogicalSwitchEntry 2 }
alaOpenflowLogicalSwitchMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
api(2),
pfcChannel(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Openflow Logical Switch Mode. Normal is regular Openflow,
API is for ACL-like flow operation. Only one Logical Switch
can be in api mode at a time.
PFC-Channel mode is to indicate the Logical Switch
is operating in NEC mode.
This object cannot be modified after the Logical Switch has been created."
DEFVAL { normal }
::= { alaOpenflowLogicalSwitchEntry 3 }
alaOpenflowLogicalSwitchVersions OBJECT-TYPE
SYNTAX BITS {
v1dot0 (0),
v1dot3dot1 (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Openflow Logical Switch Bitmap of enabled Openflow versions.
At least one version must be enabled."
DEFVAL { { v1dot0, v1dot3dot1 } }
::= { alaOpenflowLogicalSwitchEntry 4 }
alaOpenflowLogicalSwitchVlan OBJECT-TYPE
SYNTAX Integer32 (0|2..4093)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Openflow Logical Switch VLAN. The value 0 indicates that no
VLAN has been specified, it is not a valid value to write.
This object is not valid to write when creating/modifying an
entry with alaOpenflowLogicalSwitchMode api(2)"
DEFVAL { 0 }
::= { alaOpenflowLogicalSwitchEntry 5 }
alaOpenflowLogicalSwitchControllerCount OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the configured controllers for the Logical Switch."
::= { alaOpenflowLogicalSwitchEntry 6 }
alaOpenflowLogicalSwitchInterfaceCount OBJECT-TYPE
SYNTAX Integer32 (0..5000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the configured interfaces (ports and link aggregations) for the Logical Switch."
::= { alaOpenflowLogicalSwitchEntry 7 }
alaOpenflowLogicalSwitchFlowCount OBJECT-TYPE
SYNTAX Integer32 (0..511)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the flows pushed to the Logical Switch by its controllers."
::= { alaOpenflowLogicalSwitchEntry 8 }
alaOpenflowLogicalSwitchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Deleting a row from this table will also remove associated entries from other tables in this mib
that have a logical switch as part of their index."
::= { alaOpenflowLogicalSwitchEntry 9 }
alaOpenflowLogicalSwitchLearnedMacUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is only applicable to Logical Switches in api(2) mode.
When enabled(1), learned MACs will be forwarded to controllers
via a Packet-In message."
DEFVAL { disabled }
::= { alaOpenflowLogicalSwitchEntry 10 }
alaOpenflowLogicalSwitchProbeTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Probe-time for a logical switch in the pfc-channel mode in seconds,
which will override the existing global idle-probe-time for sending
echo-request to the OpenFlow Controller."
DEFVAL { 5 }
::= { alaOpenflowLogicalSwitchEntry 11 }
alaOpenflowLogicalSwitchFailureDetectTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Failure detect time, in seconds, is configured for a logical switch
in the pfc-channel mode for detecting disconnection to the
OpenFlow Controller if there was no echo reply or message from the controller."
DEFVAL { 4 }
::= { alaOpenflowLogicalSwitchEntry 12 }
alaOpenflowLogicalSwitchDPID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An unique 8 bytes DPID for a logical switch."
::= { alaOpenflowLogicalSwitchEntry 13 }
alaOpenflowLogicalSwitchTableMissAction OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
controller(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action to be taken when an Openflow Table Miss occurs. When set to drop
if any packet has a table miss, it will be dropped. If set to controller
it will be forwarded to the controller."
DEFVAL { drop }
::= { alaOpenflowLogicalSwitchEntry 14 }
alaOpenflowLogicalSwitchTCPBufferSizeTx OBJECT-TYPE
SYNTAX Unsigned32 (2..32)
UNITS "Kilo Bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP send buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers
in the logical switch."
DEFVAL { 2 }
::= { alaOpenflowLogicalSwitchEntry 15 }
alaOpenflowLogicalSwitchTCPBufferSizeRx OBJECT-TYPE
SYNTAX Unsigned32 (2..32)
UNITS "Kilo Bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP receive buffer size, in Kilo Bytes, for socket connection to OpenFlow controllers
in the logical switch."
DEFVAL { 2 }
::= { alaOpenflowLogicalSwitchEntry 16 }
-- Openflow Controller Table
alaOpenflowControllerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaOpenflowControllerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for each controller on each logical switch.
Currently, up to three controllers per logical switch are supported per logical switch."
::= { alcatelIND1OpenflowMIBObjects 3 }
alaOpenflowControllerEntry OBJECT-TYPE
SYNTAX AlaOpenflowControllerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Openflow Controllers attached to Logical Switches. "
INDEX { alaOpenflowControllerLogicalSwitch, alaOpenflowControllerIpType, alaOpenflowControllerIp, alaOpenflowControllerPort }
::= { alaOpenflowControllerTable 1 }
AlaOpenflowControllerEntry ::= SEQUENCE
{
alaOpenflowControllerLogicalSwitch SnmpAdminString,
alaOpenflowControllerIpType InetAddressType,
alaOpenflowControllerIp InetAddress,
alaOpenflowControllerPort Integer32,
alaOpenflowControllerRole INTEGER,
alaOpenflowControllerAdminState INTEGER,
alaOpenflowControllerOperState INTEGER,
alaOpenflowControllerRowStatus RowStatus,
alaOpenflowControllerPriority Integer32
}
alaOpenflowControllerLogicalSwitch OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Logical Switch Name."
::= { alaOpenflowControllerEntry 1 }
alaOpenflowControllerIpType OBJECT-TYPE
SYNTAX InetAddressType(1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Controller IP Address Type. The only type currently supported is ipv4(1)"
::= { alaOpenflowControllerEntry 2 }
alaOpenflowControllerIp OBJECT-TYPE
SYNTAX InetAddress(SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Controller IP Address. As specified by alaOpenflowControllerIpType,
only ipv4 is currently supported"
::= { alaOpenflowControllerEntry 3 }
alaOpenflowControllerPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Controller Port."
::= { alaOpenflowControllerEntry 4 }
alaOpenflowControllerRole OBJECT-TYPE
SYNTAX INTEGER {
equal(1),
master(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Role of the Controller for the Logical Switch. The role is negotiated by the
controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers
will always have the role of equal. Only one controller per Logical Switch
can have the role of master."
::= { alaOpenflowControllerEntry 5 }
alaOpenflowControllerAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controller Admin State. Enable or disable connection to the controller.
The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc
continues unaffected when the controller is administratively disabled."
DEFVAL { enabled }
::= { alaOpenflowControllerEntry 6 }
alaOpenflowControllerOperState OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
disabled(2),
sendError(3),
init(4),
connecting(5),
backoff(6),
exchangingHello(7),
active(8),
idle(9),
disconnected(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the Logical Switch connection to the Controller."
::= { alaOpenflowControllerEntry 7 }
alaOpenflowControllerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable,
an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable."
::= { alaOpenflowControllerEntry 8 }
alaOpenflowControllerPriority OBJECT-TYPE
SYNTAX Integer32(0..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Openflow Controller Priority. Priority value of 0 implies highest pririoty and 2 implies lowest."
DEFVAL { 2 }
::= { alaOpenflowControllerEntry 9 }
-- Openflow Interface Table
alaOpenflowInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaOpenflowInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row for each interface (port or link aggregation) assigned to
a logical switch. An interface can only belong to one logical switch at a time.
If a logical switch in API mode exists, interfaces cannot be manually added to/deleted from it;
instead, interfaces default to the API mode logical switch when not assigned to another Logical Switch.
Interfaces can be reassigned from the API mode logical switch to a normal mode logical switch
(by adding it to that normal mode logical switch) but not directly reassigned from one normal mode
logical switch to another normal mode logical switch."
::= { alcatelIND1OpenflowMIBObjects 4 }
alaOpenflowInterfaceEntry OBJECT-TYPE
SYNTAX AlaOpenflowInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the interfaces assigned to Openflow Logical Switches."
INDEX { alaOpenflowInterfaceLogicalSwitch, alaOpenflowInterface }
::= { alaOpenflowInterfaceTable 1 }
AlaOpenflowInterfaceEntry ::= SEQUENCE
{
alaOpenflowInterfaceLogicalSwitch SnmpAdminString,
alaOpenflowInterface Integer32,
alaOpenflowInterfaceMode INTEGER,
alaOpenflowInterfaceRowStatus RowStatus,
alaOpenflowInterfaceType INTEGER,
alaOpenflowInterfaceNativeVlan Unsigned32
}
alaOpenflowInterfaceLogicalSwitch OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Logical Switch Name."
::= { alaOpenflowInterfaceEntry 1 }
alaOpenflowInterface OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Openflow Interface attached to a Logical Switch. Port values are dot1dBasePort values,
Link Aggregations start at 32769."
::= { alaOpenflowInterfaceEntry 2 }
alaOpenflowInterfaceMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
api(2),
pfcChannel(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Openflow Interface Mode. Normal is regular Openflow,
API is for ACL like flow operation and PFC-Channel is for NEC OFC."
::= { alaOpenflowInterfaceEntry 3 }
alaOpenflowInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable,
an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable."
::= { alaOpenflowInterfaceEntry 4 }
alaOpenflowInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
trunk (1),
access (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Openflow Interface Type."
::= { alaOpenflowInterfaceEntry 5 }
alaOpenflowInterfaceNativeVlan OBJECT-TYPE
SYNTAX Unsigned32 (2..4093)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Native VLAN for Openflow Interface."
::= { alaOpenflowInterfaceEntry 6 }
-- Openflow Interface VLAN Table
alaOpenflowInterfaceVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaOpenflowInterfaceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of Tag VLANs for an OpenFlow Interface (port or link-aggregation) Entry.
logical switch belongs to."
::= { alcatelIND1OpenflowMIBObjects 5 }
alaOpenflowInterfaceVlanEntry OBJECT-TYPE
SYNTAX AlaOpenflowInterfaceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the Tag VLANs associated with an OpenFlow Interface."
INDEX { alaOpenflowInterfaceLogicalSwitch, alaOpenflowInterface, alaOpenflowInterfaceVlanVlanID }
::= { alaOpenflowInterfaceVlanTable 1 }
AlaOpenflowInterfaceVlanEntry ::= SEQUENCE
{
alaOpenflowInterfaceVlanVlanID Unsigned32,
alaOpenflowInterfaceVlanRowStatus RowStatus
}
alaOpenflowInterfaceVlanVlanID OBJECT-TYPE
SYNTAX Unsigned32 (0|2..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tag VLAN for an Openflow Interface."
DEFVAL { 0 }
::= { alaOpenflowInterfaceVlanEntry 1 }
alaOpenflowInterfaceVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"On create, the specified logical switch interface must exist in alaOpenflowInterfaceTable,
otherwise an entry creation in this table would not be allowed. Deletion of an interface entry in
alaOpenflowInterfaceTable would result in deletion of all entries for that interface in the
alaOpenflowInterfaceVlanEntry"
::= { alaOpenflowInterfaceVlanEntry 2 }
-- Openflow MIB Conformance and Compliances
alcatelIND1OpenflowMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For ALU Openflow MIB Subsystem Units Of Conformance."
::= { alcatelIND1OpenflowMIBConformance 1 }
alcatelIND1OpenflowMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For ALU Openflow MIB Subsystem Compliance Statements."
::= { alcatelIND1OpenflowMIBConformance 2 }
alaOpenflowMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Openflow."
MODULE -- This module
MANDATORY-GROUPS
{
alaOpenflowModuleConfigGroup,
alaOpenflowModuleLogicalSwitchGroup,
alaOpenflowModuleControllerGroup,
alaOpenflowModuleInterfaceGroup,
alaOpenflowModuleInterfaceVlanGroup
}
::= { alcatelIND1OpenflowMIBCompliances 1 }
alaOpenflowModuleConfigGroup OBJECT-GROUP
OBJECTS
{
alaOpenflowGlobalBackoffMax,
alaOpenflowGlobalIdleProbeTimeout
}
STATUS current
DESCRIPTION
"Openflow Global Configuration Modules Group."
::= { alcatelIND1OpenflowMIBGroups 1 }
alaOpenflowModuleLogicalSwitchGroup OBJECT-GROUP
OBJECTS
{
alaOpenflowLogicalSwitchAdminState,
alaOpenflowLogicalSwitchMode,
alaOpenflowLogicalSwitchVersions,
alaOpenflowLogicalSwitchVlan,
alaOpenflowLogicalSwitchControllerCount,
alaOpenflowLogicalSwitchInterfaceCount,
alaOpenflowLogicalSwitchFlowCount,
alaOpenflowLogicalSwitchRowStatus,
alaOpenflowLogicalSwitchLearnedMacUpdate,
alaOpenflowLogicalSwitchProbeTime,
alaOpenflowLogicalSwitchFailureDetectTime,
alaOpenflowLogicalSwitchDPID,
alaOpenflowLogicalSwitchTableMissAction,
alaOpenflowLogicalSwitchTCPBufferSizeTx,
alaOpenflowLogicalSwitchTCPBufferSizeRx
}
STATUS current
DESCRIPTION
"Openflow Logical Switch Configuration Modules Group."
::= { alcatelIND1OpenflowMIBGroups 2 }
alaOpenflowModuleControllerGroup OBJECT-GROUP
OBJECTS
{
alaOpenflowControllerRole,
alaOpenflowControllerAdminState,
alaOpenflowControllerOperState,
alaOpenflowControllerRowStatus,
alaOpenflowControllerPriority
}
STATUS current
DESCRIPTION
"Openflow Controller Configuration Modules Group."
::= { alcatelIND1OpenflowMIBGroups 3 }
alaOpenflowModuleInterfaceGroup OBJECT-GROUP
OBJECTS
{
alaOpenflowInterfaceMode,
alaOpenflowInterfaceRowStatus,
alaOpenflowInterfaceType,
alaOpenflowInterfaceNativeVlan
}
STATUS current
DESCRIPTION
"Openflow Interface Configuration Modules Group."
::= { alcatelIND1OpenflowMIBGroups 4 }
alaOpenflowModuleInterfaceVlanGroup OBJECT-GROUP
OBJECTS
{
alaOpenflowInterfaceVlanRowStatus
}
STATUS current
DESCRIPTION
"Openflow Interface with VLAN Configuration Modules Group."
::= { alcatelIND1OpenflowMIBGroups 5 }
END