mibs/nokia/aos7/ALCATEL-IND1-PORT-MAPPING
ALCATEL-IND1-PORT-MAPPING DEFINITIONS ::= BEGIN
IMPORTS
Integer32,
OBJECT-TYPE,
MODULE-IDENTITY,
OBJECT-IDENTITY FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC
InterfaceIndexOrZero FROM IF-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
softentIND1PortMapping FROM ALCATEL-IND1-BASE;
alcatelIND1PortMappingMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Port Mapping session control
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"Addressing discrepancies with Alcatel Standard."
::= { softentIND1PortMapping 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1PortMappingMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Port Mapping
Subsystem Managed Objects."
::= { alcatelIND1PortMappingMIB 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
portMapping OBJECT IDENTIFIER ::= { alcatelIND1PortMappingMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- xxxxxxxxxxxxxxxxxxx
-- Port Mapping Status Table
-- xxxxxxxxxxxxxxxxxxx
portMappingSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMapSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port mapping session instances."
::= { portMapping 1 }
pmapSessionEntry OBJECT-TYPE
SYNTAX PMapSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A port mapping entry."
INDEX { pmapSessionNumber }
::= { portMappingSessionTable 1 }
PMapSessionEntry ::= SEQUENCE {
pmapSessionNumber
Integer32,
pmapSessionStatus
INTEGER,
pmapSessionDirection
INTEGER,
pmapSessionRowStatus
RowStatus,
pmapSessionUnknownUnicastFloodStatus
INTEGER,
pmapSessionDynProxyARP
INTEGER
}
pmapSessionNumber OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a specific port mapping instance."
DEFVAL { 1 }
::= { pmapSessionEntry 1 }
pmapSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether port mapping is configured with or without user/network ports.
the session is disabled by default. The switch administrator has to
explicity enable a session once configured. Also a session can only
be enabled if there are 2 or more user/network ports in that session."
DEFVAL { disable }
::= { pmapSessionEntry 2 }
pmapSessionDirection OBJECT-TYPE
SYNTAX INTEGER {
uni (1),
bi (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The session direction (uni/ bi) for this sessions network ports."
DEFVAL { bi }
::= { pmapSessionEntry 3 }
pmapSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry.
"
::= { pmapSessionEntry 4 }
pmapSessionUnknownUnicastFloodStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To enable or disable unknown unicast flooding from network port to user ports for this session."
DEFVAL { enable }
::= { pmapSessionEntry 5 }
pmapSessionDynProxyARP OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Enables/disables Dynamic proxy ARP on the port mapping session."
DEFVAL { disable }
::= { pmapSessionEntry 6}
-- xxxxxxxxxxxxxxxxxxx
-- Port Mapping Table
-- xxxxxxxxxxxxxxxxxxx
portMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port mapping table instances."
::= { portMapping 2 }
pmapEntry OBJECT-TYPE
SYNTAX PMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A port mapping entry."
INDEX { pmapSessionNumber, pmapPortIfIndex }
::= { portMappingTable 1 }
PMapEntry ::= SEQUENCE {
pmapPortIfIndex
InterfaceIndexOrZero,
pmapPortType
INTEGER,
pmapRowStatus
RowStatus
}
pmapPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The physical identification number for this port (user/network port)."
DEFVAL { 0 }
::= { pmapEntry 1 }
pmapPortType OBJECT-TYPE
SYNTAX INTEGER {
user (1),
network (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The logical group (user/network) number for this port instance."
DEFVAL { user }
::= { pmapEntry 2 }
pmapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry.
"
::= { pmapEntry 3 }
-- --------------------------------------------------------------
-- Port Mapping MIB - Conformance Information
-- --------------------------------------------------------------
pmapConformance OBJECT IDENTIFIER ::= { alcatelIND1PortMappingMIB 2 }
pmapGroups OBJECT IDENTIFIER ::= { pmapConformance 1 }
pmapCompliances OBJECT IDENTIFIER ::= { pmapConformance 2 }
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- Units of conformance
-- --------------------------------------------------------------
pmapSessionTableGroup OBJECT-GROUP
OBJECTS {
pmapSessionStatus,
pmapSessionDirection,
pmapSessionRowStatus,
pmapSessionUnknownUnicastFloodStatus,
pmapSessionDynProxyARP
}
STATUS current
DESCRIPTION
"Mandatory objects for the Port Mapping Session Table group"
::= { pmapGroups 1 }
pmapTableGroup OBJECT-GROUP
OBJECTS {
pmapPortType,
pmapRowStatus
}
STATUS current
DESCRIPTION
"Mandatory objects for the Port Mapping Table group"
::= { pmapGroups 2 }
-- --------------------------------------------------------------
-- Compliance statements
-- --------------------------------------------------------------
pmapCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of Port Mapping."
MODULE
MANDATORY-GROUPS {
pmapSessionTableGroup,
pmapTableGroup
}
::= { pmapCompliances 1 }
-- --------------------------------------------------------------
END