mibs/nokia/aos7/ALCATEL-IND1-QCN-MIB
ALCATEL-IND1-QCN-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32,
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
Unsigned32
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
softentIND1QcnMib
FROM ALCATEL-IND1-BASE;
alcatelIND1QcnMIB MODULE-IDENTITY
LAST-UPDATED "201109010000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201109010000Z"
DESCRIPTION
"Capability Manager is used to set system wide limitation."
::= { softentIND1QcnMib 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1QcnMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For QCN Subsystem Managed Objects."
::= { alcatelIND1QcnMIB 1 }
alcatelIND1QcnMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For QCN Subsystem Conformance Information."
::= { alcatelIND1QcnMIB 2 }
alcatelIND1QcnMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For QCN Subsystem Units Of Conformance."
::= { alcatelIND1QcnMIBConformance 1 }
alcatelIND1QcnMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For QCN Subsystem Compliance Statements."
::= { alcatelIND1QcnMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaQcnConfig OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 1 }
alaQcnConformance OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- xxxxxxxxxxxxxxxxxxxx
-- QCN Global Controls
-- xxxxxxxxxxxxxxxxxxxx
alaQcnGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaQcnGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of QCN global configuration."
::= { alaQcnConfig 1 }
alaQcnGlobalEntry OBJECT-TYPE
SYNTAX AlaQcnGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A QCN global Entry."
INDEX { alaQcnGlobalCompId }
::= { alaQcnGlobalTable 1 }
AlaQcnGlobalEntry ::= SEQUENCE {
alaQcnGlobalCompId
Integer32,
alaQcnGlobalCNMVlanTag
Integer32,
alaQcnGlobalCID
Integer32
}
alaQcnGlobalCompId OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Comp Id is the index to this table."
::= { alaQcnGlobalEntry 1 }
alaQcnGlobalCNMVlanTag OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set, the vlan tag overrides the incoming vlan id and forces
CNMs to be transmitted in that vlan."
DEFVAL { 0 }
::= { alaQcnGlobalEntry 2 }
alaQcnGlobalCID OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Congestion Point ID sent as part of the Congestion
Notification Message."
DEFVAL { 0 }
::= { alaQcnGlobalEntry 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxx
-- QCN Port Instance Table
-- xxxxxxxxxxxxxxxxxxxxxxxx
alaQcnPortInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaQcnPortInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of DCP Port Instances."
::= { alaQcnConfig 2 }
alaQcnPortInstanceEntry OBJECT-TYPE
SYNTAX AlaQcnPortInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DCP Port Instance Entry."
INDEX { alaQcnPIIfIndex, alaQcnPIPriority }
::= { alaQcnPortInstanceTable 1 }
AlaQcnPortInstanceEntry ::= SEQUENCE {
alaQcnPIIfIndex
Unsigned32,
alaQcnPIPriority
Unsigned32,
alaQcnPIPriorityReset
TruthValue,
alaQcnPICncpStatsClear
TruthValue,
alaQcnPICncpReset
TruthValue
}
alaQcnPIIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of this port."
::= { alaQcnPortInstanceEntry 1 }
alaQcnPIPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Priority identifier of this port."
::= { alaQcnPortInstanceEntry 2 }
alaQcnPIPriorityReset OBJECT-TYPE
SYNTAX TruthValue { true(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to reset the priority configuration to the global default."
::= { alaQcnPortInstanceEntry 3 }
alaQcnPICncpStatsClear OBJECT-TYPE
SYNTAX TruthValue { true(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to clear the cncp statistics for this port
priority. Will do nothing if stats are disabled."
::= { alaQcnPortInstanceEntry 4 }
alaQcnPICncpReset OBJECT-TYPE
SYNTAX TruthValue { true(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to reset the cncp configuration to the global default for
this port priority."
::= { alaQcnPortInstanceEntry 5 }
-- -------------------------------------------------------------
-- Compliance Statements
-- -------------------------------------------------------------
alcatelIND1QcnMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for QCN Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
alaQcnGlobalGroup,
alaQcnPortInstanceGroup
}
::= { alcatelIND1QcnMIBCompliances 1 }
-- -------------------------------------------------------------
-- Units Of Conformance
-- -------------------------------------------------------------
alaQcnGlobalGroup OBJECT-GROUP
OBJECTS
{
alaQcnGlobalCNMVlanTag,
alaQcnGlobalCID
}
STATUS current
DESCRIPTION
"Collection of Global QCN Configuration for management of QCN."
::= { alcatelIND1QcnMIBGroups 1 }
alaQcnPortInstanceGroup OBJECT-GROUP
OBJECTS
{
alaQcnPIPriorityReset,
alaQcnPICncpStatsClear,
alaQcnPICncpReset
}
STATUS current
DESCRIPTION
"Collection of QCN Port level Configuration for management of QCN."
::= { alcatelIND1QcnMIBGroups 2 }
END