mibs/nokia/aos7/ALCATEL-IND1-RIP-MIB
ALCATEL-IND1-RIP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, TimeTicks, Integer32
FROM SNMPv2-SMI
rip2IfConfEntry
FROM RIPv2-MIB
RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
routingIND1Rip
FROM ALCATEL-IND1-BASE;
alcatelIND1RIPMIB MODULE-IDENTITY
LAST-UPDATED "201010260000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
" Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Of Global RIP Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Rip 1 }
alcatelIND1RIPMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIP)
Subsystem Managed Objects."
::= { alcatelIND1RIPMIB 1 }
alcatelIND1RIPMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIP)
Subsystem Conformance Information."
::= { alcatelIND1RIPMIB 2 }
alcatelIND1RIPMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIP)
Subsystem Units Of Conformance."
::= { alcatelIND1RIPMIBConformance 1 }
alcatelIND1RIPMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Routing Information Protocol (RIP)
Subsystem Compliance Statements."
::= { alcatelIND1RIPMIBConformance 2 }
--********************************************************************
--************************ Textual Conventions ***********************
--********************************************************************
AlaAuthenticationEncryptKey ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authentication encryption key that is used to decypher
RIP simple passwords."
SYNTAX OCTET STRING (SIZE(16))
-- ************************************************************************
-- RIP Global Protocol configuration
-- ************************************************************************
alaProtocolRip OBJECT IDENTIFIER ::= { alcatelIND1RIPMIBObjects 1 }
alaRipProtoStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global administration status of RIP."
DEFVAL { disable }
::= { alaProtocolRip 1 }
alaRipHostRouteSupport OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable support for host routes."
DEFVAL { enable }
::= { alaProtocolRip 2 }
alaRipRedistRouteTag OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 2147483647 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 32-bit value tagged to each RIP internal route while
it is redistributed in to other routing protocol domains. The
lower 16-bits typically indicate the autonomous system number."
DEFVAL { 0 }
::= { alaProtocolRip 4 }
alaRipForceHolddownTimer OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 120 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval in seconds during which routing information regarding
better paths is suppressed. A route enters into a forced holddown
state when an update packet is received that indicates the route is
unreachable and when this timer value is nonzero. After this timer
has expired, if the value is less that 120 - the route enters a
holddown state for the rest of the period until 120. During this time
advertisements for better paths are accepted if any."
::= { alaProtocolRip 5 }
alaRipRouteNumber OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 2147483647 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of network routes in RIP routing table."
::= { alaProtocolRip 6 }
alaRipUpdateInterval OBJECT-TYPE
SYNTAX Integer32 (1 .. 120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval (in seconds) that RIP routing updates will
be sent out. The value must be less than or equal to
one-third the value of the invalid timer."
DEFVAL { 30 }
::= { alaProtocolRip 13 }
alaRipInvalidTimer OBJECT-TYPE
SYNTAX Integer32 (3 .. 360)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time in seconds that a route will remain active
in RIB before being moved to the invalid state.
The value must be at least three times the
update interval."
DEFVAL { 180 }
::= { alaProtocolRip 14 }
alaRipHolddownTimer OBJECT-TYPE
SYNTAX Integer32 (0 .. 120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to keep a route in the holddown state."
DEFVAL { 0 }
::= { alaProtocolRip 15 }
alaRipGarbageTimer OBJECT-TYPE
SYNTAX Integer32 (0 .. 180)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to keep a route before garbage collection."
DEFVAL { 120 }
::= { alaProtocolRip 16 }
-- ************************************************************************
-- Expansion of rip2IfCOnf
-- ************************************************************************
alaRip2IfConfAugTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRip2IfConfAugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Expansion for rip2ifconftable"
::= { alaProtocolRip 11 }
alaRip2IfConfAugEntry OBJECT-TYPE
SYNTAX AlaRip2IfConfAugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of alaRip2IfConfAugTable"
AUGMENTS { rip2IfConfEntry }
::= { alaRip2IfConfAugTable 1 }
AlaRip2IfConfAugEntry ::=
SEQUENCE {
alaRip2IfConfEncryptKey AlaAuthenticationEncryptKey,
alaRip2IfIpConfStatus INTEGER,
alaRip2IfRecvPkts Integer32,
alaRip2IfConfName SnmpAdminString,
alaRip2IfConfType INTEGER,
alaRip2IfConfPtoPPeer IpAddress,
alaRip2IfConfIngressFilterRouteMapName SnmpAdminString,
alaRip2IfConfEgressFilterRouteMapName SnmpAdminString
}
alaRip2IfConfEncryptKey OBJECT-TYPE
SYNTAX AlaAuthenticationEncryptKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication encryption key that is used to decypher
RIP passwords."
::= { alaRip2IfConfAugEntry 1 }
alaRip2IfIpConfStatus OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2), none(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the associated IP interface"
::= { alaRip2IfConfAugEntry 2 }
alaRip2IfRecvPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received on this interface"
::= { alaRip2IfConfAugEntry 3 }
alaRip2IfConfName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined name used to identify the IP interface"
::= { alaRip2IfConfAugEntry 4 }
alaRip2IfConfType OBJECT-TYPE
SYNTAX INTEGER
{ broadcast (1), point2point(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the rip interface"
::= { alaRip2IfConfAugEntry 5 }
alaRip2IfConfPtoPPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the peer for a point-to-point rip interface"
::= { alaRip2IfConfAugEntry 6 }
alaRip2IfConfIngressFilterRouteMapName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of a Route Map to be applied when filtering
RIP routing updates received on this RIP interface. RIP
routes that are explicitly denied by a Route Map are
filtered. An empty string indicates that no filtering
action is performed (this is the default). If the Route
Map is specified and a RIP route doesn't match any Route
Map route or if there is a match that is permitted, the
RIP route is not filtered.
Route Map manipulators (SET commands configured for
a Route Map) are not applied when filtering is performed.
(cf. alaRouteMapNameTable.AlaRouteMapNameEntry.alaRouteMapName)"
DEFVAL { ''H } -- the empty string
::= { alaRip2IfConfAugEntry 7 }
alaRip2IfConfEgressFilterRouteMapName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of a Route Map to be applied when filtering
RIP routing updates sent out this RIP interface. RIP
routes that are explicitly denied by a Route Map are
filtered. An empty string indicates that no filtering
action is performed (this is the default). If the Route
Map is specified and a RIP route doesn't match any Route
Map route or if there is a match that is permitted, the
RIP route is not filtered.
Route Map manipulators (SET commands configured for
a Route Map) are not applied when filtering is performed.
(cf. alaRouteMapNameTable.AlaRouteMapNameEntry.alaRouteMapName)"
DEFVAL { ''H } -- the empty string
::= { alaRip2IfConfAugEntry 8 }
-- ************************************************************************
-- ************************************************************************
alaRipEcmpRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRipEcmpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ECMP-enabled RIP routing table which contains the network routes."
::= { alaProtocolRip 12 }
alaRipEcmpRouteEntry OBJECT-TYPE
SYNTAX AlaRipEcmpRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ECMP-enabled RIP routing table which contains the network routes."
INDEX {
alaRipEcmpRouteDest,
alaRipEcmpRouteMask,
alaRipEcmpRouteNextHop
}
::= { alaRipEcmpRouteTable 1 }
AlaRipEcmpRouteEntry ::=
SEQUENCE {
alaRipEcmpRouteDest
IpAddress,
alaRipEcmpRouteMask
IpAddress,
alaRipEcmpRouteNextHop
IpAddress,
alaRipEcmpRouteType
INTEGER,
alaRipEcmpRouteAge
TimeTicks,
alaRipEcmpRouteTag
Integer32,
alaRipEcmpRouteMetric
Integer32,
alaRipEcmpRouteStatus
RowStatus,
alaRipEcmpRouteState
INTEGER
}
alaRipEcmpRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { alaRipEcmpRouteEntry 1 }
alaRipEcmpRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask for this route."
::= { alaRipEcmpRouteEntry 2 }
alaRipEcmpRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next hop to reach this route."
::= { alaRipEcmpRouteEntry 3 }
alaRipEcmpRouteType OBJECT-TYPE
SYNTAX INTEGER
{
local (1), -- local route
remote (2), -- remote route
redistribute (3) -- redistributed route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of route."
::= { alaRipEcmpRouteEntry 4 }
alaRipEcmpRouteAge OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last
updated or otherwise determined to be correct."
::= { alaRipEcmpRouteEntry 5 }
alaRipEcmpRouteTag OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 2147483647 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated route tag."
DEFVAL { 0 }
::= { alaRipEcmpRouteEntry 6 }
alaRipEcmpRouteMetric OBJECT-TYPE
SYNTAX Integer32 ( 0 .. 15 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing metric for this route."
::= { alaRipEcmpRouteEntry 7 }
alaRipEcmpRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { alaRipEcmpRouteEntry 8 }
alaRipEcmpRouteState OBJECT-TYPE
SYNTAX INTEGER
{
active (1),
garbage (2),
holddown (3),
unknown (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated state for this route."
::= { alaRipEcmpRouteEntry 9 }
-- ************************************************************************
-- ************************************************************************
--
-- Compliance Statements
--
alcatelIND1RIPMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for
Routing Information Protocol (RIP) Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
alaRipMiscellaneousGroup,
alaRipEcmpRouteGroup
}
::= { alcatelIND1RIPMIBCompliances 1 }
--
-- Units of Conformance
--
alaRipMiscellaneousGroup OBJECT-GROUP
OBJECTS
{
alaRipRedistRouteTag,
alaRipForceHolddownTimer,
alaRipRouteNumber
}
STATUS current
DESCRIPTION
"Collection of Miscellaneous objects for management of RIP."
::= { alcatelIND1RIPMIBGroups 1 }
alaRip2IfConfAugGroup OBJECT-GROUP
OBJECTS
{
alaRip2IfConfEncryptKey ,
alaRip2IfIpConfStatus ,
alaRip2IfRecvPkts ,
alaRip2IfConfName ,
alaRip2IfConfType ,
alaRip2IfConfPtoPPeer ,
alaRip2IfConfIngressFilterRouteMapName ,
alaRip2IfConfEgressFilterRouteMapName
}
STATUS current
DESCRIPTION
"Collection of RIP2 Interface objects."
::= { alcatelIND1RIPMIBGroups 2 }
alaProtocolRipGroup OBJECT-GROUP
OBJECTS
{
alaRipProtoStatus ,
alaRipHostRouteSupport ,
alaRipRedistRouteTag ,
alaRipForceHolddownTimer ,
alaRipRouteNumber ,
alaRipUpdateInterval ,
alaRipInvalidTimer ,
alaRipHolddownTimer ,
alaRipGarbageTimer
}
STATUS current
DESCRIPTION
"Collection of RIP Protocol objects."
::= { alcatelIND1RIPMIBGroups 3 }
alaRipEcmpRouteGroup OBJECT-GROUP
OBJECTS
{
alaRipRouteNumber,
alaRipEcmpRouteType,
alaRipEcmpRouteAge,
alaRipEcmpRouteTag,
alaRipEcmpRouteMetric,
alaRipEcmpRouteStatus,
alaRipEcmpRouteState
}
STATUS current
DESCRIPTION
"Collection of objects for management of Network Route configuration."
::= { alcatelIND1RIPMIBGroups 6 }
--
-- Trap definitions
--
alcatelIND1RIPTraps OBJECT IDENTIFIER ::= { alcatelIND1RIPMIB 3}
alcatelIND1RIPTrapsRoot OBJECT IDENTIFIER ::= { alcatelIND1RIPTraps 0}
ripRouteMaxLimitReached NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This notification is generated as RIP database reached supported
Maximum entries. RIP will discard any new updates."
::= {alcatelIND1RIPTrapsRoot 1}
alcatelIND1RIPTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ripRouteMaxLimitReached
}
STATUS current
DESCRIPTION
"Collection of RIP Trap Objects."
::= { alcatelIND1RIPMIBGroups 7 }
END