mibs/nokia/aos7/ALCATEL-IND1-SERVICE-MGR-MIB
ALCATEL-IND1-SERVICE-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Counter32, Unsigned32, TimeTicks, Counter64,
IpAddress
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
softentIND1serviceMgr
FROM ALCATEL-IND1-BASE
RowStatus, TEXTUAL-CONVENTION, DisplayString, TruthValue, MacAddress, TimeStamp, DateAndTime
FROM SNMPv2-TC
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
AlaEServiceUNIProfileProtocolTreatment
FROM ALCATEL-IND1-E-SERVICE-MIB
svcId, SdpId, ServObjDesc
FROM ALCATEL-IND1-TIMETRA-SERV-MIB
sapPortId, sapEncapValue
FROM ALCATEL-IND1-TIMETRA-SAP-MIB
sdpBindId
FROM ALCATEL-IND1-TIMETRA-SDP-MIB
TmnxPortID, TmnxEncapVal, TmnxServId, TmnxVcIdOrNone, SdpBindId, ServiceAdminStatus,
ServiceAdminStatus, ServiceOperStatus, TmnxServId, TmnxCustId, SdpBindId, TmnxVRtrID
FROM ALCATEL-IND1-TIMETRA-TC-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MplsLdpIdentifier
FROM MPLS-LDP-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
;
alcatelIND1ServiceMgrMIB MODULE-IDENTITY
LAST-UPDATED "201208090000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"The parameters for configuration of the service manager feature.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
::= { softentIND1serviceMgr 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Textual Conventions
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
AluLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type AluLocation represents the
type of the local 'interface':
- 'sap(1)': sap interface
- 'sdp(2)': mesh-sdp or spoke-sdp interface."
SYNTAX INTEGER {
sap(1),
sdp(2)
}
AluServiceId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A 16-bit number used to identify a Service. This ID
must be unique within the Service Domain.
The value 0 is used as the null ID.
The value from 1 to 32767 is for static range.
The value from 32768 to 65534 is for dynamic range.
The value 65535 is for all configured IDs."
SYNTAX Unsigned32 (0|1..32767|32768..65534|65535)
AluSdpId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A 16-bit number used to identify a Service
Distribution Point. This ID must be unique only
within the node where it is defined.
The value 0 is used as the null ID.
The value from 1 to 32767 is for static range.
The value from 32768 to 65534 is for dynamic range.
The value 65535 is for all configured IDs."
SYNTAX Unsigned32 (0|1..32767|32768..65534|65535)
AluServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This textual convention is used to specify the
type of a given service."
SYNTAX INTEGER {
unknown (0), -- Unknown service type
epipe (1), -- Ethernet pipe
p3pipe (2), -- POS pipe
tls (3), -- Virtual private LAN service "VPLS"
vprn (4), -- Virtual private routed network
ies (5), -- Internet enhanced service
mirror (6), -- Mirror service
apipe (7), -- ATM pipe service
fpipe (8), -- FR pipe service
ipipe (9), -- IP interworking pipe service
cpipe (10),-- Circuit Emulation pipe service
spb (11),-- Shortest Path Bridging Mac service "SPBM"
vxlan (12),-- Virtual Extensible LAN service "VxLAN"
local (13), -- Local service for traffic between SAPs but no tunnel
rfpoverspb (14) -- RFP over SPB
}
AluAllocationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Resource Allocation Type: Static (Manual) or Dynamic (Automatic)."
SYNTAX INTEGER { static(1), dynamic(2) }
AluSdpDynamicType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "SDP Type: Unicast or Multicast"
SYNTAX INTEGER {
unknown (0), -- Invalid
static (1), -- Manually configured sdp
dynamicUnicast (2), -- Dynamically created unicast path "*"
dynamicMcastRemote (3), -- Dynamically created multicast path from remote node "+"
dynamicMcastLocal (4) -- Dynamically created multicast path from local node "#"
}
AluSdpOriginType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "SDP Creation Origin"
SYNTAX INTEGER {
unknown (0), -- Invalid
static (1), -- Manually configured sdp "VPLS"
pbbDynamicUnicast (2), -- Dynamically created unicast path "*" for PBB Tunnel
pbbDynamicMcastRemote (3), -- Dynamically created multicast path from remote node "+" for PBB Tunnel
pbbDynamicMcastLocal (4), -- Dynamically created multicast path from local node "#" for PBB Tunnel
vxlanUnicast (5), -- Far-end Unicast Ip Addr for VxLAN Tunnel
vxlanMcast (6), -- Multicast Group for VxLAN Tunnel
vxlanDynamicUnicast (7), -- Dynamically created Far-end Unicast for VxLAN Tunnel
vxlanDynamicMcast (8) -- Dynamically created Multicast group for VxLAN Tunnel
}
AluDateAndTime ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION "ASCII string used to display date and time in
MM/DD/YYYY HH:MM:SS format"
SYNTAX OCTET STRING (SIZE (0..21))
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1ServiceMgrMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Service Manager Managed Objects."
::= { alcatelIND1ServiceMgrMIB 1 }
alcatelIND1ServiceMgrMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Service Manager Conformance Information."
::= { alcatelIND1ServiceMgrMIB 2 }
alcatelIND1ServiceMgrMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Service Manager Units Of Conformance."
::= { alcatelIND1ServiceMgrMIBConformance 1 }
alcatelIND1ServiceMgrMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Service Manager Compliance Statements."
::= { alcatelIND1ServiceMgrMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Service Manager Trap Group
alaServiceMgrNotifications OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 0 }
-- The Service Manager Group
alaServiceMgr OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The Service Manager Port Profile Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaServiceMgrPortProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaServiceMgrPortProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined."
::= { alaServiceMgr 1 }
alaServiceMgrPortProfileEntry OBJECT-TYPE
SYNTAX AlaServiceMgrPortProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Service Manager Port Profile entry."
INDEX { alaServiceMgrPortProfileID }
::= { alaServiceMgrPortProfileTable 1 }
AlaServiceMgrPortProfileEntry ::= SEQUENCE
{
alaServiceMgrPortProfileID DisplayString,
alaServiceMgrPortProfileStpBpduTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfile8021xTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfile8021ABTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfile8023adTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfileGvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfileAmapTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfileRowStatus RowStatus,
alaServiceMgrPortProfileMvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfileCiscoPduTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfileCiscoVlanTreatment AlaEServiceUNIProfileProtocolTreatment,
alaServiceMgrPortProfileCiscoUplinkTreatment AlaEServiceUNIProfileProtocolTreatment
}
alaServiceMgrPortProfileID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A label given to uniquely identify this port profile. Must be at least one character long."
::= { alaServiceMgrPortProfileEntry 1 }
alaServiceMgrPortProfileStpBpduTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the spanning tree
protocol BPDU received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently Peer is not supported for Spanning Tree"
DEFVAL { tunnel }
::= { alaServiceMgrPortProfileEntry 2 }
alaServiceMgrPortProfile8021xTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol."
DEFVAL { drop }
::= { alaServiceMgrPortProfileEntry 3 }
alaServiceMgrPortProfile8021ABTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol."
DEFVAL { drop }
::= { alaServiceMgrPortProfileEntry 4 }
alaServiceMgrPortProfile8023adTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
(LACP) frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently Peer is only configurable for LACP frames."
DEFVAL { peer }
::= { alaServiceMgrPortProfileEntry 5 }
alaServiceMgrPortProfileGvrpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the GVRP PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for GVRP"
DEFVAL { tunnel }
::= { alaServiceMgrPortProfileEntry 6 }
alaServiceMgrPortProfileAmapTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the Alcatel
propietary AMAP PDU frames received on the Access Port. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol."
DEFVAL { drop }
::= { alaServiceMgrPortProfileEntry 7 }
alaServiceMgrPortProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { alaServiceMgrPortProfileEntry 8 }
alaServiceMgrPortProfileMvrpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the MVRP PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for MVRP"
DEFVAL { tunnel }
::= { alaServiceMgrPortProfileEntry 9 }
alaServiceMgrPortProfileCiscoPduTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the Cisco PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for Cisco PDU"
DEFVAL { drop }
::= { alaServiceMgrPortProfileEntry 10 }
alaServiceMgrPortProfileCiscoVlanTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the Cisco Vlan PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for Cisco Vlan PDU"
DEFVAL { drop }
::= { alaServiceMgrPortProfileEntry 11 }
alaServiceMgrPortProfileCiscoUplinkTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the Cisco Uplink PDU
frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for Cisco Uplink PDU"
DEFVAL { drop }
::= { alaServiceMgrPortProfileEntry 12 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The Service Manager Port Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaServiceMgrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaServiceMgrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table has an entry for each port."
::= { alaServiceMgr 2 }
alaServiceMgrPortEntry OBJECT-TYPE
SYNTAX AlaServiceMgrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Service Manager Port entry."
INDEX { alaServiceMgrPortID }
::= { alaServiceMgrPortTable 1 }
AlaServiceMgrPortEntry ::=
SEQUENCE
{
alaServiceMgrPortID InterfaceIndex,
alaServiceMgrPortMode INTEGER,
alaServiceMgrPortEncapType INTEGER, -- deprecated
alaServiceMgrPortPortProfileID DisplayString,
alaServiceMgrPortRowStatus RowStatus,
alaServiceMgrPortLinkStatus ServiceAdminStatus,
alaServiceMgrPortSapType AluAllocationType,
alaServiceMgrPortSapCount Counter32,
alaServiceMgrPortVlanXlation ServiceAdminStatus,
alaServiceMgrPortDescription ServObjDesc
}
alaServiceMgrPortID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex uniquely identify this port table."
::= { alaServiceMgrPortEntry 1 }
alaServiceMgrPortMode OBJECT-TYPE
SYNTAX INTEGER {
undefined (0),
access (1),
network (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The alaServiceMgrPortMode variable indicates if the interface on this port
is configured as a service access port or a network access port.
Once the port's operation mode has been configured for 'access' mode,
multiple services may be configured on the port.
An access port can be created manually by Service Manager, UNP or EVB."
DEFVAL { network }
::= { alaServiceMgrPortEntry 2 }
alaServiceMgrPortEncapType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
nullEncap (1),
qEncap (2),
mplsEncap (3),
bcpNullEncap (4),
bcpDot1qEncap (5),
ipcpEncap (6),
frEncap (7),
pppAutoEncap (8),
atmEncap (9),
qinqEncap (10),
wanMirrorEncap (11),
ciscoHDLCEncap (12),
cemEncap (13)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION "Currently not required -- SAP configuration specifies the types of
frame (untagged, tagged or qinq) that can ingress/egress this port."
DEFVAL { nullEncap }
::= { alaServiceMgrPortEntry 3 }
alaServiceMgrPortPortProfileID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This Layer2 Profile associated with this port."
::= { alaServiceMgrPortEntry 4 }
alaServiceMgrPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { alaServiceMgrPortEntry 5 }
alaServiceMgrPortLinkStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link Status up/down which will affect all the SAPs configured
on this port."
DEFVAL { down }
::= { alaServiceMgrPortEntry 6 }
alaServiceMgrPortSapType OBJECT-TYPE
SYNTAX AluAllocationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resource Allocation Type: Static (Manual) or Dynamic (Automatic)."
DEFVAL { static }
::= { alaServiceMgrPortEntry 7 }
alaServiceMgrPortSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAPs configured on this port."
::= { alaServiceMgrPortEntry 8 }
alaServiceMgrPortVlanXlation OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To enable/disable the vlan translation for all the SAPs configured
on this port."
DEFVAL { down }
::= { alaServiceMgrPortEntry 9 }
alaServiceMgrPortDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this port."
DEFVAL { "" }
::= { alaServiceMgrPortEntry 10 }
-- ---------------------------------------------------------------------
-- ***** OBSOLETE *****
-- SAP Extra Information Table
--
-- This is an extension of the sapBaseInfoTable.
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the alaSapExtraInfoTable.
-- ---------------------------------------------------------------------
alaSapExtraInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ASapExtraInfoEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "A table that contains SAP information."
::= { alaServiceMgr 3 }
alaSapExtraInfoEntry OBJECT-TYPE
SYNTAX ASapExtraInfoEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Information about a specific SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { alaSapExtraInfoTable 1 }
ASapExtraInfoEntry ::=
SEQUENCE {
alaSapInfoTrusted INTEGER,
alaSapInfoPriority Integer32
}
alaSapInfoTrusted OBJECT-TYPE
SYNTAX INTEGER {
true (1),
false (2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicates whether the SAP is trusted."
DEFVAL { false }
::= { alaSapExtraInfoEntry 1 }
alaSapInfoPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Priority for this SAP."
DEFVAL { 0 }
::= { alaSapExtraInfoEntry 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- ALA Service Base Info Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaSvcBaseInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSvcBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic service information."
::= { alaServiceMgr 4 }
alaSvcBaseInfoEntry OBJECT-TYPE
SYNTAX AlaSvcBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Basic information about a specific service."
INDEX { alaSvcId }
::= { alaSvcBaseInfoTable 1 }
AlaSvcBaseInfoEntry ::=
SEQUENCE {
alaSvcId AluServiceId,
alaSvcRowStatus RowStatus,
alaSvcType AluServiceType,
alaSvcDescription ServObjDesc,
alaSvcMtu INTEGER,
alaSvcAdminStatus ServiceAdminStatus,
alaSvcOperStatus ServiceOperStatus,
alaSvcNumSaps Integer32,
alaSvcNumSdps Integer32,
alaSvcLastMgmtChange AluDateAndTime,
alaSvcLastStatusChange AluDateAndTime,
alaSvcDefMeshVcId Unsigned32,
alaSvcVFI INTEGER,
alaSvcMcIndex INTEGER,
alaSvcAllocationType AluAllocationType,
alaSvcStatsAdminStatus ServiceAdminStatus,
alaSvcRemoteFlushStatus ServiceAdminStatus,
alaSvcIsid Integer32,
alaSvcBVlan Integer32,
alaSvcMulticastMode INTEGER,
alaSvcIngressPacketCount Counter32,
alaSvcIngressByteCount Counter64,
alaSvcEgressPacketCount Counter32,
alaSvcEgressByteCount Counter64,
alaSvcClearCounters INTEGER,
alaSvcSapVlanXlation ServiceAdminStatus,
alaSvcVnid Integer32, -- VXLAN
alaSvcRemoveIngressTag ServiceAdminStatus,
alaSvcL3VpnIfIndex InterfaceIndexOrZero, -- L3-VPN
alaSvcL3VpnIfName SnmpAdminString, -- L3-VPN
alaSvcL3VpnVrfName SnmpAdminString, -- L3-VPN
alaSvcL3VpnMtu Integer32 -- L3-VPN
}
alaSvcId OBJECT-TYPE
SYNTAX AluServiceId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object alaSvcId specifies the
Service identifier. This value should be unique within the
service domain."
::= { alaSvcBaseInfoEntry 1 }
alaSvcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This value of the object alaSvcRowStatus specifies the
status of this row.
To delete an entry from this table, the corresponding
service must be administratively down, have no SAP's
defined on it, and have no SDP bindings."
::= { alaSvcBaseInfoEntry 2 }
alaSvcType OBJECT-TYPE
SYNTAX AluServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object alaSvcType specifies the service
type: e.g. vpls, spb, etc. The value of this object
must be specified when the row is created and cannot be
changed while the row status is 'active'."
::= { alaSvcBaseInfoEntry 3 }
alaSvcDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object alaSvcDescription specifiers an
optional, generic information about this service."
DEFVAL { "" }
::= { alaSvcBaseInfoEntry 4 }
alaSvcMtu OBJECT-TYPE
SYNTAX INTEGER (0..9194)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object alaSvcMtu specifies the largest frame
size (in octets) that this service can handle.
The default value of this object depends on the service
type:
1514 octets for epipe, p3pipe and tls, 1508 for apipe
and fpipe, and 1500 octets for vprn, ipipe and ies, 1514
octets for cpipe."
::= { alaSvcBaseInfoEntry 5 }
alaSvcAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object alaSvcAdminStatus specifies the
desired state of this service."
DEFVAL { down }
::= { alaSvcBaseInfoEntry 6 }
alaSvcOperStatus OBJECT-TYPE
SYNTAX ServiceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object alaSvcOperStatus indicates the
operating state of this service. The requirements for a
service to be operationally up depend on the service type:
tls services are 'up' when the service is
administratively up and either at least two SAP's or
spoke SDP Bind's, or one SAP or spoke SDP Bind and
at least one mesh SDP Bind are operationally up."
::= { alaSvcBaseInfoEntry 7 }
alaSvcNumSaps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object alaSvcNumSaps indicates the number of
SAPs defined on this service."
::= { alaSvcBaseInfoEntry 8 }
alaSvcNumSdps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object alaSvcNumSdps indicates the number of
SDPs bound to this service."
::= { alaSvcBaseInfoEntry 9 }
alaSvcLastMgmtChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of of the object alaSvcLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this service."
::= { alaSvcBaseInfoEntry 10 }
alaSvcLastStatusChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object alaSvcLastStatusChange indicates the
value of sysUpTime at the time of the most recent
operating status change to his service."
::= { alaSvcBaseInfoEntry 11 }
alaSvcDefMeshVcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object alaSvcDefMeshVcId specifies, only in
services that accept mesh SDP bindings, the VC ID portion
of the sdpBindId index of each mesh SDP binding defined in
the service. The default value of this object is equal to
the service ID."
::= { alaSvcBaseInfoEntry 12 }
alaSvcVFI OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Virtual Forwarding Instance (VFI) allocated for a service on
a LER or BEB switch. This service instance defines the forwarding
plane for the data packets among virtual port members associated
with the VFI. The VFI has one-to-one mapping relationship with
the ServiceId for this service instance."
::= { alaSvcBaseInfoEntry 13 }
alaSvcMcIndex OBJECT-TYPE
SYNTAX INTEGER (3..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Multicast Index associated with a VFI which is used to setup
the multicast replication logic for this service instance on the
LER or BEB switch. The McIndex has one-to-one mapping relationship
with the ServiceId for this service instance."
::= { alaSvcBaseInfoEntry 14 }
alaSvcAllocationType OBJECT-TYPE
SYNTAX AluAllocationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resource Allocation Type: Static (Manual) or Dynamic (Automatic)."
DEFVAL { static }
::= { alaSvcBaseInfoEntry 15 }
alaSvcStatsAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To enable or disable ingress and egress statistics counters for packets
flowing through the SAP or Sdp Bind objects for this service instance."
DEFVAL { down }
::= { alaSvcBaseInfoEntry 16 }
alaSvcRemoteFlushStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To enable or disable flushing C-Vlan MACs learned at the remote nodes."
DEFVAL { down }
::= { alaSvcBaseInfoEntry 17 }
alaSvcIsid OBJECT-TYPE
SYNTAX Integer32 (256..16777214)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The i-domain Service Indentifier (I-SID) which identifies the service
instance in a PBB network on a BEB switch. For a customer packet flowing
toward the b-domain, the I-SID is derived from the VFI and inserted into
the packet. For a packet arrived from the b-domain, the I-SID is used
to identify the VFI for the i-domain processing."
::= { alaSvcBaseInfoEntry 18 }
alaSvcBVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Backbone Vlan Id (BVlan) which defines the b-domain for the PBB traffic."
::= { alaSvcBaseInfoEntry 19 }
alaSvcMulticastMode OBJECT-TYPE
SYNTAX INTEGER { headend(1), tandem(2), hybrid (3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To configure the multicast replication mode for each service:
Head-end(1) where a non-unicast packet entering the SAP port
is replicated once for each receiver in the b-domain using its
unicast BMAC.
Tandem(2) where a non-unicast packet entering the SAP port is
replicated once at each node using the multicast group address.
Hybrid(3) combination of Head-end and Tandem replication."
DEFVAL { headend }
::= { alaSvcBaseInfoEntry 20 }
alaSvcIngressPacketCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total ingress packet count flowing through this service."
::= { alaSvcBaseInfoEntry 21 }
alaSvcIngressByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total ingress byte count flowing through this service."
::= { alaSvcBaseInfoEntry 22 }
alaSvcEgressPacketCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total egress packet count flowing through this service."
::= { alaSvcBaseInfoEntry 23 }
alaSvcEgressByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total egress byte count flowing through this service."
::= { alaSvcBaseInfoEntry 24 }
alaSvcClearCounters OBJECT-TYPE
SYNTAX INTEGER {
done (0),
clear (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When set to clear (1), all ingress/egress stats counters of this service will be
reset to 0. This object will be set to done (0) when all counters are cleared."
DEFVAL { done }
::= { alaSvcBaseInfoEntry 25 }
alaSvcSapVlanXlation OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To enable/disable the vlan translation for all the SAPs configured
in this service if the corresponding access ports for the SAPs also
has the vlan translation enabled."
DEFVAL { down }
::= { alaSvcBaseInfoEntry 26 }
alaSvcVnid OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The virtual network identifier (VNID). A 24-bit value used to designate the
individual VXLAN overlay network on which the communicating VMs are situated.
VMs in different VXLAN overlay networks cannot communicate with each other.
Value 0 and 0xfffffff are currently reserved.
Value -1 indicates all VNIDs currently configured."
::= { alaSvcBaseInfoEntry 27 }
alaSvcRemoveIngressTag OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To enable/disable the removal of the tag from the ingress pkts matching all SAPs
configured in this service"
DEFVAL { down }
::= { alaSvcBaseInfoEntry 28 }
alaSvcL3VpnIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The interface index of the L3-VPN IP interface associated with this service.
Value 0 indicates no L3-VPN interface is associated with this service."
DEFVAL { 0 }
::= { alaSvcBaseInfoEntry 29 }
alaSvcL3VpnIfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The interface name of the L3-VPN IP interface associated with this service"
::= { alaSvcBaseInfoEntry 30 }
alaSvcL3VpnVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current VRF instance name for the L3-VPN interface associated with this service.
The default VRF is assumed if not specifed."
::= { alaSvcBaseInfoEntry 31 }
alaSvcL3VpnMtu OBJECT-TYPE
SYNTAX Integer32 (0 | 1280..9198)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The maximum packet size of a IP control packet that can be handled by the CPU
for this service.
Value 0 indicates the default mtu."
DEFVAL { 1500 }
::= { alaSvcBaseInfoEntry 32 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- ALA Service Access Point (SAP) Base Info Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaSapBaseInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSapBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic SAP information."
::= { alaServiceMgr 5 }
alaSapBaseInfoEntry OBJECT-TYPE
SYNTAX AlaSapBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SAP."
INDEX { alaSvcId, alaSapPortId, alaSapEncapValue }
::= { alaSapBaseInfoTable 1 }
AlaSapBaseInfoEntry ::=
SEQUENCE {
alaSapPortId InterfaceIndex,
alaSapEncapValue TmnxEncapVal,
alaSapRowStatus RowStatus,
alaSapType AluServiceType,
alaSapDescription ServObjDesc,
alaSapAdminStatus ServiceAdminStatus,
alaSapOperStatus INTEGER,
alaSapLastMgmtChange AluDateAndTime,
alaSapLastStatusChange AluDateAndTime,
alaSapOperFlags BITS,
alaSapTrusted TruthValue,
alaSapPriority INTEGER,
alaSapSvcId AluServiceId,
alaSapSvcVFI INTEGER,
alaSapVirtualPort INTEGER,
alaSapAllocationType AluAllocationType,
alaSapStatsAdminStatus ServiceAdminStatus,
alaSapIngressPacketCount Counter32,
alaSapIngressByteCount Counter64,
alaSapEgressPacketCount Counter32,
alaSapEgressByteCount Counter64,
alaSapClearCounters INTEGER
}
alaSapPortId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The ID of the access port where this SAP
is defined."
::= { alaSapBaseInfoEntry 1 }
alaSapEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the label used to identify this
SAP on the access port specified by sapPortId."
::= { alaSapBaseInfoEntry 2 }
alaSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'."
::= { alaSapBaseInfoEntry 3 }
alaSapType OBJECT-TYPE
SYNTAX AluServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the type of service where
this SAP is defined."
::= { alaSapBaseInfoEntry 4 }
alaSapDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this SAP."
DEFVAL { "" }
::= { alaSapBaseInfoEntry 5 }
alaSapAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this SAP."
DEFVAL { down }
::= { alaSapBaseInfoEntry 6 }
alaSapOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
ingressQosMismatch (3),
egressQosMismatch (4),
portMtuTooSmall (5),
svcAdminDown (6),
iesIfAdminDown (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapOperStatus indicates the
operating state of this SAP."
::= { alaSapBaseInfoEntry 7 }
alaSapLastMgmtChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this SAP."
::= { alaSapBaseInfoEntry 8 }
alaSapLastStatusChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent operating status change to this
SAP."
::= { alaSapBaseInfoEntry 9 }
alaSapOperFlags OBJECT-TYPE
SYNTAX BITS {
sapAdminDown (0), -- SAP is admin down
svcAdminDown (1), -- Service is admin down
iesIfAdminDown (2), -- IP interface is admin down
-- (IES and VPRN only)
portOperDown (3), -- Access port is oper down
portMtuTooSmall (4), -- Access port's MTU is less
-- than Service MTU
l2OperDown (5), -- L2 PVC/PVP is oper down
-- (FR and ATM only)
ingressQosMismatch (6), -- Mismatch between ingress
-- QoS and Scheduler policies
egressQosMismatch (7), -- Mismatch between egress
-- QoS and Scheduler policies
relearnLimitExceeded (8), -- MAC relearn limit was
-- exceeded (TLS only)
recProtSrcMac (9), -- Received a packet with a
-- protected source MAC
-- (TLS only)
subIfAdminDown (10), -- Subscriber interface is
-- admin down (group-interface
-- SAP only)
sapIpipeNoCeIpAddr (11), -- CE IP Address not
-- configured for Ipipe SAP
-- (IPIPE SAP only)
sapTodResourceUnavail (12),-- SAP with ToD had
-- insufficient resources
-- at boot time and got
-- default policies.
sapTodMssResourceUnavail (13), -- MSS of this SAP uses
-- ToD and due to
-- insufficient resources
-- at boot time got
-- default scheduler
-- policies.
sapParamMismatch (14), -- Service specific local
-- parameter mismatch
sapCemNoEcidOrMacAddr (15), -- ECID or MAC address not
-- configured (CEM SAP
-- only)
sapStandbyForMcRing (16), -- mc-ring keeps this SAP
-- standby for the
-- corresponding SAP on
-- peer
sapSvcMtuTooSmall (17), -- Service MTU is less
-- than the SAP payload
ingressNamedPoolMismatch (18), -- Invalid named-pool
-- on the ingress side
egressNamedPoolMismatch (19), -- Invalid named-pool
-- on the egress side
ipMirrorNoMacAddr (20), -- No MAC Address configured
-- for the ip-mirror
sapEpipeNoRingNode (21) -- No TIMETRA-MC-REDUNDANCY-MIB
-- ::tmnxMcEpipeSapEntry object
-- configured for Epipe SAP
-- (EPIPE SAP only)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SAP."
::= { alaSapBaseInfoEntry 10 }
alaSapTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether the SAP is trusted."
DEFVAL { true }
::= { alaSapBaseInfoEntry 11 }
alaSapPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Priority of this SAP."
DEFVAL { 0 }
::= { alaSapBaseInfoEntry 12 }
alaSapSvcId OBJECT-TYPE
SYNTAX AluServiceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Service Id where this SAP is attached to."
::= { alaSapBaseInfoEntry 13 }
alaSapSvcVFI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Service Virtual Forwarding Instance which defines the
broadcast domain among SAPs and Sdp-Binds of this instance."
::= { alaSapBaseInfoEntry 14 }
alaSapVirtualPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logical representation of a SAP associated with a service
instance where customer packets ingress and egress."
::= { alaSapBaseInfoEntry 15 }
alaSapAllocationType OBJECT-TYPE
SYNTAX AluAllocationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Resource Allocation Type: Static (Manual CLI) or Dynamic (through
requests from UNP or EVB)."
::= { alaSapBaseInfoEntry 16 }
alaSapStatsAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "To enable/disable the ingress/egress stats counters on this SAP."
::= { alaSapBaseInfoEntry 17 }
alaSapIngressPacketCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total ingress packet count flowing through this SAP."
::= { alaSapBaseInfoEntry 18 }
alaSapIngressByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total ingress byte count flowing through this SAP."
::= { alaSapBaseInfoEntry 19 }
alaSapEgressPacketCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total egress packet count flowing through this SAP."
::= { alaSapBaseInfoEntry 20 }
alaSapEgressByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total egress byte count flowing through this SAP."
::= { alaSapBaseInfoEntry 21 }
alaSapClearCounters OBJECT-TYPE
SYNTAX INTEGER {
done (0),
clear (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When set to clear (1), all ingress/egress stats counters of this sap will be
reset to 0. This object will be set to done (0) when all counters are cleared."
DEFVAL { done }
::= { alaSapBaseInfoEntry 22 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- ALA Service Distribution Point (SDP) Base Info Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaSdpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SDP information."
::= { alaServiceMgr 6 }
alaSdpInfoEntry OBJECT-TYPE
SYNTAX AlaSdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SDP."
INDEX { alaSdpId }
::= { alaSdpInfoTable 1 }
AlaSdpInfoEntry ::=
SEQUENCE {
alaSdpId AluSdpId,
alaSdpRowStatus RowStatus,
alaSdpSvcType AluServiceType,
alaSdpDelivery INTEGER,
alaSdpFarEndIpAddress IpAddress,
alaSdpDescription ServObjDesc,
alaSdpLabelSignaling INTEGER,
alaSdpAdminStatus ServiceAdminStatus,
alaSdpOperStatus INTEGER,
alaSdpAdminPathMtu INTEGER,
alaSdpOperPathMtu Integer32,
alaSdpLastMgmtChange AluDateAndTime,
alaSdpLdpEnabled TruthValue,
alaSdpVlanVcEtype Unsigned32,
alaSdpAdvertisedVllMtuOverride TruthValue,
alaSdpOperFlags BITS,
alaSdpLastStatusChange AluDateAndTime,
alaSdpNetworkPort InterfaceIndexOrZero,
alaSdpBVlan INTEGER,
alaSdpSystemId MacAddress,
alaSdpSystemName DisplayString,
alaSdpSpSourceId Unsigned32,
alaSdpAllocationType AluAllocationType,
alaSdpDynamicType AluSdpDynamicType,
alaSdpBindCount INTEGER,
alaSdpIsid INTEGER,
alaSdpMcastPortList DisplayString,
alaSdpCreationOrigin AluSdpOriginType,
alaSdpAdminTTL OCTET STRING
}
alaSdpId OBJECT-TYPE
SYNTAX AluSdpId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SDP identifier."
::= { alaSdpInfoEntry 1 }
alaSdpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'. To delete an entry
from this table, the corresponding SDP must be
administratively down, not bound to any service,
and not in use as a mirror destination."
::= { alaSdpInfoEntry 2 }
alaSdpSvcType OBJECT-TYPE
SYNTAX AluServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the type of service where
this SDP is defined."
::= { alaSdpInfoEntry 3 }
alaSdpDelivery OBJECT-TYPE
SYNTAX INTEGER {
gre (1),
mpls (2),
pbb (3),
vxlan (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the type of delivery used
by this SDP: e.g. GRE or MPLS. The value of this
object must be specified when the row is created
and cannot be changed while the row status is
'active'."
::= { alaSdpInfoEntry 4 }
alaSdpFarEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the IP address of the
remote end of the MPLS or VxLAN tunnel defined
by this SDP. For SPB, this object is not used.
For VxLAN, the value of this object must
be set for the row to become 'active', and
can only be changed while the admin status
of the SDP is 'down'. The value can be a unicast
IP address of a single far-end node, or a multicast
group address for multiple member nodes."
::= { alaSdpInfoEntry 5 }
alaSdpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this SDP."
DEFVAL { "" }
::= { alaSdpInfoEntry 6 }
alaSdpLabelSignaling OBJECT-TYPE
SYNTAX INTEGER {
none (1),
tldp (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the signaling protocol
used to obtain the ingress and egress labels
used in frames transmitted and received on
this SDP. When the value of this object is
'none' then the labels are manually assigned
at the time the SDP is bound to a service. The
value of this object can only be changed while
the admin status of the SDP is 'down'."
DEFVAL { tldp }
::= { alaSdpInfoEntry 7 }
alaSdpAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this SDP."
DEFVAL { down }
::= { alaSdpInfoEntry 8 }
alaSdpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
notAlive (2),
notReady (3),
invalidEgressInterface (4),
transportTunnelDown (5),
down (6),
created (7), -- dynamically created for SPB
destroyed (8) -- dynamically destroyed for SPB
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating state of this SDP. The value
'notAlive' is valid only when keep-alive is
enabled, and it means that the keep-alive
operating status is not alive. The value
'notReady' is valid only when this SDP uses a
label signaling protocol (e.g. TLDP) and it means
that the signaling session with the far-end peer
has not been established. The value
'invalidEgressInterface' indicates that the
IOM's have detected that the egress interface
towards the far-end device is not a network
port."
::= { alaSdpInfoEntry 9 }
alaSdpAdminPathMtu OBJECT-TYPE
SYNTAX INTEGER (0|576..9194)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the desired largest service
frame size (in octets) that can be transmitted
through this SDP to the far-end ESR, without
requiring the packet to be fragmented. The default
value of zero indicates that the path MTU should
be computed dynamically from the corresponding
MTU of the tunnel."
DEFVAL { 0 }
::= { alaSdpInfoEntry 10 }
alaSdpOperPathMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the actual largest service
frame size (in octets) that can be transmitted
through this SDP to the far-end ESR, without
requiring the packet to be fragmented. In order
to be able to bind this SDP to a given service,
the value of this object must be equal to or
larger than the MTU of the service, as defined
by its svcMtu."
::= { alaSdpInfoEntry 11 }
alaSdpLastMgmtChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this SDP."
::= { alaSdpInfoEntry 12 }
alaSdpLdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of this object is 'true'
the transport LSP's are signalled by LDP,
as opposed to being provisioned static or
RSVP-signalled LSP's. This object applies
only to MPLS SDP's."
DEFVAL { false }
::= { alaSdpInfoEntry 13 }
alaSdpVlanVcEtype OBJECT-TYPE
SYNTAX Unsigned32 ('600'H..'ffff'H)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the Ethertype used in
frames sent out this SDP, when the VC type
is vlan."
DEFVAL { '8100'H }
::= { alaSdpInfoEntry 14 }
alaSdpAdvertisedVllMtuOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of this object is 'true'
the advertised MTU of a VLL spoke SDP bind
includes the 14-byte L2 header, so that it is
backward compatible with pre-2.0 software."
DEFVAL { false }
::= { alaSdpInfoEntry 15 }
alaSdpOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpAdminDown (0),
signalingSessionDown (1),
transportTunnelDown (2),
keepaliveFailure (3),
invalidEgressInterface (4),
noSystemIpAddress (5),
transportTunnelUnstable (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SDP."
::= { alaSdpInfoEntry 16 }
alaSdpLastStatusChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent operating status change to this
SDP."
::= { alaSdpInfoEntry 17 }
alaSdpNetworkPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of the network port where isis discovered the
neighbor node information (BVlan and BMac)."
DEFVAL { 0 }
::= { alaSdpInfoEntry 18 }
alaSdpBVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Backbone Vlan Id (BVlan) where isis has discovered the
neighbor node information (BVlan and BMac)."
::= { alaSdpInfoEntry 19 }
alaSdpSystemId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Backbone MAC (B-MAC) where isis has discovered the
neighbor node information (BVlan and BMac)."
::= { alaSdpInfoEntry 20 }
alaSdpSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The neighbor host name associated with the SDP object."
::= { alaSdpInfoEntry 21 }
alaSdpSpSourceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The neighbor Shortest Path Source Id (the LSB 20-bit of SystemId."
::= { alaSdpInfoEntry 22 }
alaSdpAllocationType OBJECT-TYPE
SYNTAX AluAllocationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Allocation Type: Static (Manual) or Dynamic (Automatic)."
DEFVAL { static }
::= { alaSdpInfoEntry 23 }
alaSdpDynamicType OBJECT-TYPE
SYNTAX AluSdpDynamicType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SDP type allocated for Unicast or Multicast Path according
to the tunnel type."
DEFVAL { static }
::= { alaSdpInfoEntry 24 }
alaSdpBindCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Bind-SDPs bound to this SDP."
::= { alaSdpInfoEntry 25 }
alaSdpIsid OBJECT-TYPE
SYNTAX INTEGER (256..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The i-domain Service Indentifier (I-SID) for the Group Mac
assigned to this Multicast SDP."
::= { alaSdpInfoEntry 26 }
alaSdpMcastPortList OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of egress ports for this Multicast SDP."
::= { alaSdpInfoEntry 27 }
-- VxLAN
alaSdpCreationOrigin OBJECT-TYPE
SYNTAX AluSdpOriginType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SDP creation origin staticly or dynamically for the tunnel types
(MPLS, PBB, VxLAN...)"
::= { alaSdpInfoEntry 28 }
alaSdpAdminTTL OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The number of hops an IP packet travels through the VxLAN tunnel
before being discarded. This value is inserted into the TTL field
of the IP header in the VXLAN encapsulated header originating from
this node."
DEFVAL { "@" }
::= { alaSdpInfoEntry 29 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- ALA Service Distribution Point Bind (SDP-Bind) Base Info Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SDP binding information."
::= { alaServiceMgr 7 }
alaSdpBindEntry OBJECT-TYPE
SYNTAX AlaSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SDP binding."
INDEX { alaSvcId, alaSdpBindId }
::= { alaSdpBindTable 1 }
AlaSdpBindEntry ::=
SEQUENCE {
alaSdpBindId SdpBindId,
alaSdpBindRowStatus RowStatus,
alaSdpBindSvcType AluServiceType,
alaSdpBindAdminIngressLabel Unsigned32,
alaSdpBindAdminEgressLabel Unsigned32,
alaSdpBindOperIngressLabel Unsigned32,
alaSdpBindOperEgressLabel Unsigned32,
alaSdpBindAdminStatus ServiceAdminStatus,
alaSdpBindOperStatus INTEGER,
alaSdpBindLastMgmtChange AluDateAndTime,
alaSdpBindType INTEGER,
alaSdpBindOperFlags BITS,
alaSdpBindLastStatusChange AluDateAndTime,
alaSdpBindControlWordBit TruthValue,
alaSdpBindOperControlWord TruthValue,
alaSdpBindNetworkPort InterfaceIndexOrZero,
alaSdpBindVirtualPort INTEGER,
alaSdpBindIsid INTEGER,
alaSdpBindBVlan INTEGER,
alaSdpBindSystemId MacAddress,
alaSdpBindSystemName DisplayString,
alaSdpBindAllocationType AluAllocationType,
alaSdpBindIngressPacketCount Counter32,
alaSdpBindIngressByteCount Counter64,
alaSdpBindEgressPacketCount Counter32,
alaSdpBindEgressByteCount Counter64,
-- VxLAN
alaSdpBindCreationOrigin AluSdpOriginType,
alaSdpBindFarEndIpAddress IpAddress,
alaSdpBindVnid Integer32,
alaSdpBindDescription ServObjDesc,
alaSdpBindStatsAdminStatus ServiceAdminStatus
}
alaSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "SDP Binding identifier."
::= { alaSdpBindEntry 1 }
alaSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'."
::= { alaSdpBindEntry 2 }
alaSdpBindSvcType OBJECT-TYPE
SYNTAX AluServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the type of service where
this Sdp Bind is defined."
::= { alaSdpBindEntry 3 }
alaSdpBindAdminIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1 | 2048..18431)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The static MPLS VC label used by the far-end device
to send packets to this device in this service via
this SDP. The value of alaSdpBindAdminIngressLabel is
1 when it is used by a mirror service. All mirror SDPs
use this label to avoid the unnecessary use of
additional labels."
DEFVAL { 0 }
::= { alaSdpBindEntry 4 }
alaSdpBindAdminEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The static MPLS VC label used by this device to send
packets to the far-end device in this service via
this SDP."
DEFVAL { 0 }
::= { alaSdpBindEntry 5 }
alaSdpBindOperIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MPLS label used by the far-end device to send
packets to this device in this service via this SDP.
This label is either alaSdpBindAdminIngressLabel, if
not null, or the one obtained via the SDP's signaling
protocol."
DEFVAL { 0 }
::= { alaSdpBindEntry 6 }
alaSdpBindOperEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MPLS label used by this device to send packets
to the far-end device in this service via this SDP.
This label is either alaSdpBindAdminEgressLabel, if
not null, or the one obtained via the SDP's signaling
protocol."
DEFVAL { 0 }
::= { alaSdpBindEntry 7 }
alaSdpBindAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this Service-SDP binding."
DEFVAL { up }
::= { alaSdpBindEntry 8 }
alaSdpBindOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
noEgressLabel (2),
noIngressLabel (3),
noLabels (4),
down (5),
svcMtuMismatch (6),
sdpPathMtuTooSmall (7),
sdpNotReady (8),
sdpDown (9),
sapDown (10),
created (11), -- dynamically created for SPB
destroyed (12) -- dynamically destroyed for SPB
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of alaSdpBindOperStatus indicates the operating status of
this Service-SDP binding.
'up' The Service-SDP binding is operational.
'noEgressLabel' The ingress label is available but the
egress one is missing.
'noIngressLabel' The egress label is available but the
ingress one is not.
'noLabels' Both the ingress and the egress labels
are missing.
'down' The binding is administratively down.
'svcMtuMismatch' Both labels are available, but a service
MTU mismatch was detected between the local
and the far-end devices.
'sdpPathMtuTooSmall' The operating path MTU of the corresponding
SDP is smaller than the service MTU.
'sdpNotReady' The SDP's signaling session is down.
'sdpDown' The SDP is not operationally up.
'sapDown' The SAP associated with the service is down."
::= { alaSdpBindEntry 9 }
alaSdpBindLastMgmtChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this Service-SDP binding."
::= { alaSdpBindEntry 10 }
alaSdpBindType OBJECT-TYPE
SYNTAX INTEGER {
spoke (1),
mesh (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates whether this Service SDP
binding is a spoke or a mesh. The value of this
object must be specified when the row is created
and cannot be changed while the row status is
'active'."
DEFVAL { mesh }
::= { alaSdpBindEntry 11 }
alaSdpBindOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpBindAdminDown (0), -- SDP Bind is admin down
svcAdminDown (1), -- Service is admin down
sapOperDown (2), -- SAP is oper down (VLL's only)
sdpOperDown (3), -- SDP is oper down
sdpPathMtuTooSmall (4), -- SDP's path MTU is less than Service MTU
noIngressVcLabel (5), -- No ingress VC label
noEgressVcLabel (6), -- No egress VC label
svcMtuMismatch (7), -- Service MTU mismatch with the remote PE
vcTypeMismatch (8), -- VC type mismatch with the remote PE
relearnLimitExceeded (9), -- MAC relearn limit was exceeded (TLS only)
iesIfAdminDown (10),-- IP interface is admin down (IES and VPRN only)
releasedIngressVcLabel (11),-- Peer released our ingress VC label
labelsExhausted (12),-- Label Manager has ran out of labels
svcParamMismatch (13),-- Service-specific parameter mismatch
insufficientBandwidth (14),-- Insufficient bandwidth to allocate to SDP binding
pwPeerFaultStatusBits (15),-- Received PW fault status bits from peer
meshSdpDown (16) -- Mesh SDP Down
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SDP Bind."
::= { alaSdpBindEntry 12 }
alaSdpBindLastStatusChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object alaSdpBindLastStatusChange specifies
the value of sysUpTime at the time of the most recent
operating status change to this SDP Bind."
::= { alaSdpBindEntry 13 }
alaSdpBindControlWordBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "alaSdpBindControlWordBit specifies whether the use of the
'ControlWord' is preferred or not. The value of
alaSdpBindControlWordBit is exchanged with LDP peer during
pseudowire negotiation time. The default value is
determined by alaSdpBindVcType. alaSdpBindVcType of atmSdu and
frDlci must have default value of 'true'. Other values of
alaSdpBindVcType must have default value of 'false'."
::= { alaSdpBindEntry 14 }
alaSdpBindOperControlWord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "alaSdpBindOperControlWord indicates whether the 'ControlWord'
is used or not. The value of alaSdpBindOperControlWord is
negotiated with the LDP peer. When both the local and the
peer prefer the use of the 'ControlWord', alaSdpBindOperControlWord
has the value of 'true'."
::= { alaSdpBindEntry 15 }
alaSdpBindNetworkPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of the network port associated with a service instance
where mpls labeled or b-domain packets ingress and egress."
DEFVAL { 0 }
::= { alaSdpBindEntry 16 }
alaSdpBindVirtualPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logical representation of a network port associated with a service
instance where mpls labeled or b-domain packets ingress and egress."
DEFVAL { 0 }
::= { alaSdpBindEntry 17 }
alaSdpBindIsid OBJECT-TYPE
SYNTAX INTEGER (256..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The i-domain Service Indentifier (I-SID) for the Group Mac
assigned to this Multicast SDP Bind."
::= { alaSdpBindEntry 18 }
alaSdpBindBVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Backbone VlanId (BVlan) associated with the Sdp Bind object."
::= { alaSdpBindEntry 19 }
alaSdpBindSystemId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The neighbor Backbone MAC (B-MAC) associated with the Sdp Bind object."
::= { alaSdpBindEntry 20 }
alaSdpBindSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The neighbor host name associated with the Sdp Bind object for SPB or
the interface name to reach the far-end node for VxLAN."
::= { alaSdpBindEntry 21 }
alaSdpBindAllocationType OBJECT-TYPE
SYNTAX AluAllocationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Allocation Type: Static (Manual) or Dynamic (Automatic)."
DEFVAL { static }
::= { alaSdpBindEntry 22 }
alaSdpBindIngressPacketCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total ingress packet count flowing through this SDP Bind."
::= { alaSdpBindEntry 23 }
alaSdpBindIngressByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total ingress byte count flowing through this SDP Bind."
::= { alaSdpBindEntry 24 }
alaSdpBindEgressPacketCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total egress packet count flowing through this SDP Bind."
::= { alaSdpBindEntry 25 }
alaSdpBindEgressByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total egress byte count flowing through this SDP Bind."
::= { alaSdpBindEntry 26 }
alaSdpBindCreationOrigin OBJECT-TYPE
SYNTAX AluSdpOriginType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SDP creation origin staticly or dynamically for the tunnel types
(MPLS, PBB, VxLAN...)"
::= { alaSdpBindEntry 27 }
alaSdpBindFarEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the Unicast IP address or the Multicast Group Address
of the the SDP"
::= { alaSdpBindEntry 28 }
alaSdpBindVnid OBJECT-TYPE
SYNTAX Integer32(1..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The virtual network identifier (VNID). A 24-bit value used to designate the
individual VXLAN overlay network on which the communicating VMs are situated.
VMs in different VXLAN overlay networks cannot communicate with each other.
Value 0 and 0xfffffff are currently reserved -- Propietary"
::= { alaSdpBindEntry 29 }
alaSdpBindDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this SDP Bind."
DEFVAL { "" }
::= { alaSdpBindEntry 30 }
alaSdpBindStatsAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "To enable/disable the ingress/egress stats counters on this Bind SDP."
::= { alaSdpBindEntry 31 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Service Manager System Config Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaSvcMgrSysTable OBJECT IDENTIFIER
::= { alaServiceMgr 8 }
-- SystemId & SystemName for this node
alaSvcMgrSysId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SystemId (System Mac) assigned for this node by
chassis supervison after boot-up"
::= { alaSvcMgrSysTable 1 }
alaSvcMgrSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SystemName assigned for this node by
chassis supervison after boot-up"
::= { alaSvcMgrSysTable 2 }
alaSvcMgrSysLastMgmtChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the most recent
management-initiated change to this system configuration"
::= { alaSvcMgrSysTable 3 }
alaSvcMgrSysLastStatusChange OBJECT-TYPE
SYNTAX AluDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the most recent
operating status change to the system configuration"
::= { alaSvcMgrSysTable 4 }
-- Trap AdminState for status updates
alaSvcMgrSvcTrapAdminState OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Admin state for trap generation upon a service status change"
DEFVAL { disable }
::= { alaSvcMgrSysTable 5 }
alaSvcMgrSapTrapAdminState OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Admin state for trap generation upon a SAP status change"
DEFVAL { disable }
::= { alaSvcMgrSysTable 6 }
alaSvcMgrSdpTrapAdminState OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Admin state for trap generation upon a SDP status change"
DEFVAL { disable }
::= { alaSvcMgrSysTable 7 }
alaSvcMgrSdpBindTrapAdminState OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Admin state for trap generation upon a Service Bind status change"
DEFVAL { disable }
::= { alaSvcMgrSysTable 8 }
alaSvcMgrMaxTrapPerMinute OBJECT-TYPE
SYNTAX INTEGER (1..65534|65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set maximum trap rate per minute.
The value 65535 is for unlimited trap rate."
DEFVAL { 60 }
::= { alaSvcMgrSysTable 9 }
alaSvcMgrStatsAdminState OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The global admin state for Service, SAP, and Sdp Bind statistics.
When enabled, each Service/SAP/Bind object can reserve a set of packet/byte counters
for ingress and egress flows. When disabled, all stats resources are released."
DEFVAL { enable }
::= { alaSvcMgrSysTable 10 }
alaSvcMgrVxlanDestUdpPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VXLAN well-known destination UDP Port in the outer UDP header.
IANA has assigned the value 4789 for the VXLAN UDP port"
DEFVAL { 4789 }
::= { alaSvcMgrSysTable 11 }
alaSvcMgrVxlanVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current VRF instance name associated with VxLAN L3 traffic. The default VRF
is assumed if not specifed"
::= { alaSvcMgrSysTable 12 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
--
-- Service IGMP Configuration Table
--
alaServiceMgrIgmp OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 2 }
alaIgmpServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Service table contains the information on which IPv4 multicast
switching and routing is configured."
::= { alaServiceMgrIgmp 1 }
alaIgmpServiceEntry OBJECT-TYPE
SYNTAX IgmpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponds to a service on which IPv4 multicast switching
and routing is configured."
INDEX {
svcId
}
::= { alaIgmpServiceTable 1 }
IgmpServiceEntry ::= SEQUENCE {
alaIgmpServiceStatus INTEGER,
alaIgmpServiceQuerying INTEGER,
alaIgmpServiceSpoofing INTEGER,
alaIgmpServiceZapping INTEGER,
alaIgmpServiceVersion Unsigned32,
alaIgmpServiceRobustness Unsigned32,
alaIgmpServiceQueryInterval Unsigned32,
alaIgmpServiceQueryResponseInterval Unsigned32,
alaIgmpServiceLastMemberQueryInterval Unsigned32,
alaIgmpServiceRouterTimeout Unsigned32,
alaIgmpServiceSourceTimeout Unsigned32,
alaIgmpServiceProxying INTEGER,
alaIgmpServiceUnsolicitedReportInterval Unsigned32,
alaIgmpServiceQuerierForwarding INTEGER,
alaIgmpServiceMaxGroupLimit Unsigned32,
alaIgmpServiceMaxGroupExceedAction INTEGER
}
alaIgmpServiceStatus OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IPv4 multicast switching and routing
on the Service."
::= { alaIgmpServiceEntry 1 }
alaIgmpServiceQuerying OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IGMP Querying on the Service."
::= { alaIgmpServiceEntry 2 }
alaIgmpServiceSpoofing OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IGMP Spoofing on the Service."
::= { alaIgmpServiceEntry 3 }
alaIgmpServiceZapping OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IGMP Zapping on the Service."
::= { alaIgmpServiceEntry 4 }
alaIgmpServiceVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default IGMP protocol Version running on the Service."
::= { alaIgmpServiceEntry 5 }
alaIgmpServiceRobustness OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Robustness variable used on the Service."
::= { alaIgmpServiceEntry 6 }
alaIgmpServiceQueryInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Query Interval used on the Service."
::= { alaIgmpServiceEntry 7 }
alaIgmpServiceQueryResponseInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Query Response Interval on the Service."
::= { alaIgmpServiceEntry 8 }
alaIgmpServiceLastMemberQueryInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Last Member Query Interval on the Service."
::= { alaIgmpServiceEntry 9 }
alaIgmpServiceRouterTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Router Timeout on the Service."
::= { alaIgmpServiceEntry 10 }
alaIgmpServiceSourceTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Source Timeout on the Service."
::= { alaIgmpServiceEntry 11 }
alaIgmpServiceProxying OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IGMP Proxying on the Service."
::= { alaIgmpServiceEntry 12 }
alaIgmpServiceUnsolicitedReportInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IGMP Unsolicited Report Interval on the Service."
::= { alaIgmpServiceEntry 13 }
alaIgmpServiceQuerierForwarding OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IGMP Querier Forwarding on the Service."
::= { alaIgmpServiceEntry 14 }
alaIgmpServiceMaxGroupLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of IGMP Group memberships that can be learnt on the Service."
DEFVAL {0}
::= { alaIgmpServiceEntry 15 }
alaIgmpServiceMaxGroupExceedAction OBJECT-TYPE
SYNTAX INTEGER { none(0), drop(1), replace(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when the IGMP group membership limit is exceeded on the Service."
DEFVAL { none }
::= { alaIgmpServiceEntry 16 }
--
-- Service Group Membership Table
--
alaIgmpMemberServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IGMP group membership information for SAPs."
::= { alaServiceMgrIgmp 2 }
alaIgmpMemberServiceSapEntry OBJECT-TYPE
SYNTAX IgmpMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IGMP group membership request."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaIgmpMemberServiceSapGroupAddressType,
alaIgmpMemberServiceSapGroupAddress,
alaIgmpMemberServiceSapSourceAddressType,
alaIgmpMemberServiceSapSourceAddress
}
::= { alaIgmpMemberServiceSapTable 1 }
IgmpMemberServiceSapEntry ::= SEQUENCE {
alaIgmpMemberServiceSapGroupAddressType InetAddressType,
alaIgmpMemberServiceSapGroupAddress InetAddress,
alaIgmpMemberServiceSapSourceAddressType InetAddressType,
alaIgmpMemberServiceSapSourceAddress InetAddress,
alaIgmpMemberServiceSapMode INTEGER,
alaIgmpMemberServiceSapCount Counter32,
alaIgmpMemberServiceSapTimeout TimeTicks
}
alaIgmpMemberServiceSapGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpMemberServiceSapEntry 1 }
alaIgmpMemberServiceSapGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv4 group address."
::= { alaIgmpMemberServiceSapEntry 2 }
alaIgmpMemberServiceSapSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpMemberServiceSapEntry 3 }
alaIgmpMemberServiceSapSourceAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv4 source address."
::= { alaIgmpMemberServiceSapEntry 4 }
alaIgmpMemberServiceSapMode OBJECT-TYPE
SYNTAX INTEGER { include(1), exclude(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's IGMP source filter mode."
::= { alaIgmpMemberServiceSapEntry 5 }
alaIgmpMemberServiceSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's counter."
::= { alaIgmpMemberServiceSapEntry 6 }
alaIgmpMemberServiceSapTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's timeout."
::= { alaIgmpMemberServiceSapEntry 7}
alaIgmpMemberServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IGMP group membership information for SDP bindings."
::= { alaServiceMgrIgmp 3 }
alaIgmpMemberServiceSdpBindEntry OBJECT-TYPE
SYNTAX IgmpMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IGMP group membership request."
INDEX {
svcId,
sdpBindId,
alaIgmpMemberServiceSdpBindGroupAddressType,
alaIgmpMemberServiceSdpBindGroupAddress,
alaIgmpMemberServiceSdpBindSourceAddressType,
alaIgmpMemberServiceSdpBindSourceAddress
}
::= { alaIgmpMemberServiceSdpBindTable 1 }
IgmpMemberServiceSdpBindEntry ::= SEQUENCE {
alaIgmpMemberServiceSdpBindGroupAddressType InetAddressType,
alaIgmpMemberServiceSdpBindGroupAddress InetAddress,
alaIgmpMemberServiceSdpBindSourceAddressType InetAddressType,
alaIgmpMemberServiceSdpBindSourceAddress InetAddress,
alaIgmpMemberServiceSdpBindMode INTEGER,
alaIgmpMemberServiceSdpBindCount Counter32,
alaIgmpMemberServiceSdpBindTimeout TimeTicks
}
alaIgmpMemberServiceSdpBindGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpMemberServiceSdpBindEntry 1 }
alaIgmpMemberServiceSdpBindGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv4 group address."
::= { alaIgmpMemberServiceSdpBindEntry 2 }
alaIgmpMemberServiceSdpBindSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpMemberServiceSdpBindEntry 3 }
alaIgmpMemberServiceSdpBindSourceAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv4 source address."
::= { alaIgmpMemberServiceSdpBindEntry 4 }
alaIgmpMemberServiceSdpBindMode OBJECT-TYPE
SYNTAX INTEGER { include(1), exclude(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's IGMP source filter mode."
::= { alaIgmpMemberServiceSdpBindEntry 5 }
alaIgmpMemberServiceSdpBindCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's counter."
::= { alaIgmpMemberServiceSdpBindEntry 6 }
alaIgmpMemberServiceSdpBindTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's timeout."
::= { alaIgmpMemberServiceSdpBindEntry 7 }
--
-- Static Group Membership Table
--
alaIgmpStaticMemberServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap static IGMP group membership information."
::= { alaServiceMgrIgmp 4 }
alaIgmpStaticMemberServiceSapEntry OBJECT-TYPE
SYNTAX IgmpStaticMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a ervice sap static IGMP group membership request."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaIgmpStaticMemberServiceSapGroupAddressType,
alaIgmpStaticMemberServiceSapGroupAddress
}
::= { alaIgmpStaticMemberServiceSapTable 1 }
IgmpStaticMemberServiceSapEntry ::= SEQUENCE {
alaIgmpStaticMemberServiceSapGroupAddressType InetAddressType,
alaIgmpStaticMemberServiceSapGroupAddress InetAddress,
alaIgmpStaticMemberServiceSapRowStatus RowStatus
}
alaIgmpStaticMemberServiceSapGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpStaticMemberServiceSapEntry 1 }
alaIgmpStaticMemberServiceSapGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service sap static group membership request's IPv4 group address."
::= { alaIgmpStaticMemberServiceSapEntry 2 }
alaIgmpStaticMemberServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaIgmpStaticMemberServiceSapEntry 3}
alaIgmpStaticMemberServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sdp binding static IGMP group membership information."
::= { alaServiceMgrIgmp 5 }
alaIgmpStaticMemberServiceSdpBindEntry OBJECT-TYPE
SYNTAX IgmpStaticMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a service sdp binding static IGMP group membership request."
INDEX {
svcId,
sdpBindId,
alaIgmpStaticMemberServiceSdpBindGroupAddressType,
alaIgmpStaticMemberServiceSdpBindGroupAddress
}
::= { alaIgmpStaticMemberServiceSdpBindTable 1 }
IgmpStaticMemberServiceSdpBindEntry ::= SEQUENCE {
alaIgmpStaticMemberServiceSdpBindGroupAddressType InetAddressType,
alaIgmpStaticMemberServiceSdpBindGroupAddress InetAddress,
alaIgmpStaticMemberServiceSdpBindRowStatus RowStatus
}
alaIgmpStaticMemberServiceSdpBindGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpStaticMemberServiceSdpBindEntry 1 }
alaIgmpStaticMemberServiceSdpBindGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service sdp binding static group membership request's IPv4 group address."
::= { alaIgmpStaticMemberServiceSdpBindEntry 2 }
alaIgmpStaticMemberServiceSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaIgmpStaticMemberServiceSdpBindEntry 3}
--
-- Neighbor Table
--
alaIgmpNeighborServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap neighboring IP multicast routers."
::= { alaServiceMgrIgmp 6 }
alaIgmpNeighborServiceSapEntry OBJECT-TYPE
SYNTAX IgmpNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast router."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaIgmpNeighborServiceSapHostAddressType,
alaIgmpNeighborServiceSapHostAddress
}
::= { alaIgmpNeighborServiceSapTable 1 }
IgmpNeighborServiceSapEntry ::= SEQUENCE {
alaIgmpNeighborServiceSapHostAddressType InetAddressType,
alaIgmpNeighborServiceSapHostAddress InetAddress,
alaIgmpNeighborServiceSapCount Counter32,
alaIgmpNeighborServiceSapTimeout TimeTicks
}
alaIgmpNeighborServiceSapHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpNeighborServiceSapEntry 1 }
alaIgmpNeighborServiceSapHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast router's IPv4 host address."
::= { alaIgmpNeighborServiceSapEntry 2 }
alaIgmpNeighborServiceSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's counter."
::= { alaIgmpNeighborServiceSapEntry 3 }
alaIgmpNeighborServiceSapTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's timeout."
::= { alaIgmpNeighborServiceSapEntry 4 }
alaIgmpNeighborServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind neighboring IP multicast routers."
::= { alaServiceMgrIgmp 7 }
alaIgmpNeighborServiceSdpBindEntry OBJECT-TYPE
SYNTAX IgmpNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast router."
INDEX {
svcId,
sdpBindId,
alaIgmpNeighborServiceSdpBindHostAddressType,
alaIgmpNeighborServiceSdpBindHostAddress
}
::= { alaIgmpNeighborServiceSdpBindTable 1 }
IgmpNeighborServiceSdpBindEntry ::= SEQUENCE {
alaIgmpNeighborServiceSdpBindHostAddressType InetAddressType,
alaIgmpNeighborServiceSdpBindHostAddress InetAddress,
alaIgmpNeighborServiceSdpBindCount Counter32,
alaIgmpNeighborServiceSdpBindTimeout TimeTicks
}
alaIgmpNeighborServiceSdpBindHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpNeighborServiceSdpBindEntry 1 }
alaIgmpNeighborServiceSdpBindHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast router's IPv4 host address."
::= { alaIgmpNeighborServiceSdpBindEntry 2 }
alaIgmpNeighborServiceSdpBindCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's counter."
::= { alaIgmpNeighborServiceSdpBindEntry 3 }
alaIgmpNeighborServiceSdpBindTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's timeout."
::= { alaIgmpNeighborServiceSdpBindEntry 4 }
--
-- Static Neighbor Table
--
alaIgmpStaticNeighborServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap static IP multicast routers."
::= { alaServiceMgrIgmp 8 }
alaIgmpStaticNeighborServiceSapEntry OBJECT-TYPE
SYNTAX IgmpStaticNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a service sap static IP multicast router."
INDEX {
svcId,
sapPortId,
sapEncapValue
}
::= { alaIgmpStaticNeighborServiceSapTable 1 }
IgmpStaticNeighborServiceSapEntry ::= SEQUENCE {
alaIgmpStaticNeighborServiceSapRowStatus RowStatus
}
alaIgmpStaticNeighborServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaIgmpStaticNeighborServiceSapEntry 1 }
alaIgmpStaticNeighborServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind static IP multicast routers."
::= { alaServiceMgrIgmp 9 }
alaIgmpStaticNeighborServiceSdpBindEntry OBJECT-TYPE
SYNTAX IgmpStaticNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a service SdpBind static IP multicast router."
INDEX {
svcId,
sdpBindId
}
::= { alaIgmpStaticNeighborServiceSdpBindTable 1 }
IgmpStaticNeighborServiceSdpBindEntry ::= SEQUENCE {
alaIgmpStaticNeighborServiceSdpBindRowStatus RowStatus
}
alaIgmpStaticNeighborServiceSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaIgmpStaticNeighborServiceSdpBindEntry 1 }
--
-- Querier Table
--
alaIgmpQuerierServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap neighboring IGMP queriers."
::= { alaServiceMgrIgmp 10 }
alaIgmpQuerierServiceSapEntry OBJECT-TYPE
SYNTAX IgmpQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IGMP querier."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaIgmpQuerierServiceSapHostAddressType,
alaIgmpQuerierServiceSapHostAddress
}
::= { alaIgmpQuerierServiceSapTable 1 }
IgmpQuerierServiceSapEntry ::= SEQUENCE {
alaIgmpQuerierServiceSapHostAddressType InetAddressType,
alaIgmpQuerierServiceSapHostAddress InetAddress,
alaIgmpQuerierServiceSapCount Counter32,
alaIgmpQuerierServiceSapTimeout TimeTicks
}
alaIgmpQuerierServiceSapHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpQuerierServiceSapEntry 1 }
alaIgmpQuerierServiceSapHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP querier's IPv4 host address."
::= { alaIgmpQuerierServiceSapEntry 2 }
alaIgmpQuerierServiceSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP querier's counter."
::= { alaIgmpQuerierServiceSapEntry 3 }
alaIgmpQuerierServiceSapTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP querier's timeout."
::= { alaIgmpQuerierServiceSapEntry 4 }
alaIgmpQuerierServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind neighboring IGMP queriers."
::= { alaServiceMgrIgmp 11 }
alaIgmpQuerierServiceSdpBindEntry OBJECT-TYPE
SYNTAX IgmpQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IGMP querier."
INDEX {
svcId,
sdpBindId,
alaIgmpQuerierServiceSdpBindHostAddressType,
alaIgmpQuerierServiceSdpBindHostAddress
}
::= { alaIgmpQuerierServiceSdpBindTable 1 }
IgmpQuerierServiceSdpBindEntry ::= SEQUENCE {
alaIgmpQuerierServiceSdpBindHostAddressType InetAddressType,
alaIgmpQuerierServiceSdpBindHostAddress InetAddress,
alaIgmpQuerierServiceSdpBindCount Counter32,
alaIgmpQuerierServiceSdpBindTimeout TimeTicks
}
alaIgmpQuerierServiceSdpBindHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpQuerierServiceSdpBindEntry 1 }
alaIgmpQuerierServiceSdpBindHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP querier's IPv4 host address."
::= { alaIgmpQuerierServiceSdpBindEntry 2 }
alaIgmpQuerierServiceSdpBindCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP querier's counter."
::= { alaIgmpQuerierServiceSdpBindEntry 3 }
alaIgmpQuerierServiceSdpBindTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP querier's timeout."
::= { alaIgmpQuerierServiceSdpBindEntry 4 }
--
-- Static Querier Table
--
alaIgmpStaticQuerierServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap static IGMP queriers."
::= { alaServiceMgrIgmp 12 }
alaIgmpStaticQuerierServiceSapEntry OBJECT-TYPE
SYNTAX IgmpStaticQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a static IGMP querier."
INDEX {
svcId,
sapPortId,
sapEncapValue
}
::= { alaIgmpStaticQuerierServiceSapTable 1 }
IgmpStaticQuerierServiceSapEntry ::= SEQUENCE {
alaIgmpStaticQuerierServiceSapRowStatus RowStatus
}
alaIgmpStaticQuerierServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaIgmpStaticQuerierServiceSapEntry 1 }
alaIgmpStaticQuerierServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind static IGMP queriers."
::= { alaServiceMgrIgmp 13 }
alaIgmpStaticQuerierServiceSdpBindEntry OBJECT-TYPE
SYNTAX IgmpStaticQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a static IGMP querier."
INDEX {
svcId,
sdpBindId
}
::= { alaIgmpStaticQuerierServiceSdpBindTable 1 }
IgmpStaticQuerierServiceSdpBindEntry ::= SEQUENCE {
alaIgmpStaticQuerierServiceSdpBindRowStatus RowStatus
}
alaIgmpStaticQuerierServiceSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaIgmpStaticQuerierServiceSdpBindEntry 1 }
--
-- Source Table
--
alaIgmpServiceSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpServiceSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Service IP multicast source information."
::= { alaServiceMgrIgmp 14 }
alaIgmpServiceSourceEntry OBJECT-TYPE
SYNTAX IgmpServiceSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast source flow."
INDEX {
svcId,
alaIgmpServiceSourceGroupAddressType,
alaIgmpServiceSourceGroupAddress,
alaIgmpServiceSourceHostAddressType,
alaIgmpServiceSourceHostAddress,
alaIgmpServiceSourceDestAddressType,
alaIgmpServiceSourceDestAddress,
alaIgmpServiceSourceOrigAddressType,
alaIgmpServiceSourceOrigAddress
}
::= { alaIgmpServiceSourceTable 1 }
IgmpServiceSourceEntry ::= SEQUENCE {
alaIgmpServiceSourceGroupAddressType InetAddressType,
alaIgmpServiceSourceGroupAddress InetAddress,
alaIgmpServiceSourceHostAddressType InetAddressType,
alaIgmpServiceSourceHostAddress InetAddress,
alaIgmpServiceSourceDestAddressType InetAddressType,
alaIgmpServiceSourceDestAddress InetAddress,
alaIgmpServiceSourceOrigAddressType InetAddressType,
alaIgmpServiceSourceOrigAddress InetAddress,
alaIgmpServiceSourceLocale AluLocation,
alaIgmpServiceSourcePortId TmnxPortID,
alaIgmpServiceSourceEncapValue TmnxEncapVal,
alaIgmpServiceSourceSdpId SdpId,
alaIgmpServiceSourceVcId TmnxVcIdOrNone,
alaIgmpServiceSourceType INTEGER
}
alaIgmpServiceSourceGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpServiceSourceEntry 1 }
alaIgmpServiceSourceGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv4 group address."
::= { alaIgmpServiceSourceEntry 2 }
alaIgmpServiceSourceHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpServiceSourceEntry 3 }
alaIgmpServiceSourceHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv4 host address."
::= { alaIgmpServiceSourceEntry 4 }
alaIgmpServiceSourceDestAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpServiceSourceEntry 5 }
alaIgmpServiceSourceDestAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv4 tunnel destination address."
::= { alaIgmpServiceSourceEntry 6 }
alaIgmpServiceSourceOrigAddressType OBJECT-TYPE
SYNTAX InetAddressType (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv4."
::= { alaIgmpServiceSourceEntry 7 }
alaIgmpServiceSourceOrigAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv4 tunnel source address."
::= { alaIgmpServiceSourceEntry 8 }
alaIgmpServiceSourceLocale OBJECT-TYPE
SYNTAX AluLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSourceLocale indicates
where this multicast router was detected.
A multicast router found on a local SAP has the value 'sap(1)'.
A multicast router detected on an SDP has the value 'sdp(2)'."
::= { alaIgmpServiceSourceEntry 9 }
alaIgmpServiceSourcePortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSourcePortId indicates,
together with the object alaIgmpServiceSourceEncapValue, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
tlsIgmpSnpgMRouterLocale is 'sap(1)'."
::= { alaIgmpServiceSourceEntry 10 }
alaIgmpServiceSourceEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSourceEncapValue indicates,
together with the objectalaIgmpServiceSourcePortId, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSourceLocale is 'sap(1)'."
::= { alaIgmpServiceSourceEntry 11 }
alaIgmpServiceSourceSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSourceSdpId indicates,
together with the object alaIgmpServiceSourceVcId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSourceLocale is 'sdp(2)'."
::= { alaIgmpServiceSourceEntry 12 }
alaIgmpServiceSourceVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSourceVcId indicates,
together with the object alaIgmpServiceSourceSdpId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSourceLocale is 'sdp(2)'."
::= { alaIgmpServiceSourceEntry 13 }
alaIgmpServiceSourceType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast source flow's encapsulation type."
::= { alaIgmpServiceSourceEntry 14 }
--
-- Forward Table
--
alaIgmpServiceSapForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpServiceSapForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast forward information."
::= { alaServiceMgrIgmp 15 }
alaIgmpServiceSapForwardEntry OBJECT-TYPE
SYNTAX IgmpServiceSapForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast forwarded flow."
INDEX {
svcId,
alaIgmpServiceSapForwardGroupAddress,
alaIgmpServiceSapForwardHostAddress,
alaIgmpServiceSapForwardDestAddress,
alaIgmpServiceSapForwardOrigAddress,
alaIgmpServiceSapForwardNextSapPortId,
alaIgmpServiceSapForwardNextSapEncapValue
}
::= { alaIgmpServiceSapForwardTable 1 }
IgmpServiceSapForwardEntry ::= SEQUENCE {
alaIgmpServiceSapForwardLocale AluLocation,
alaIgmpServiceSapForwardPortId TmnxPortID,
alaIgmpServiceSapForwardEncapValue TmnxEncapVal,
alaIgmpServiceSapForwardSdpId SdpId,
alaIgmpServiceSapForwardVcId TmnxVcIdOrNone,
alaIgmpServiceSapForwardGroupAddress MacAddress,
alaIgmpServiceSapForwardHostAddress MacAddress,
alaIgmpServiceSapForwardDestAddress MacAddress,
alaIgmpServiceSapForwardOrigAddress MacAddress,
alaIgmpServiceSapForwardType INTEGER,
alaIgmpServiceSapForwardNextSapPortId TmnxPortID,
alaIgmpServiceSapForwardNextSapEncapValue TmnxEncapVal,
alaIgmpServiceSapForwardNextType INTEGER
}
alaIgmpServiceSapForwardLocale OBJECT-TYPE
SYNTAX AluLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSapForwardLocale indicates
where this multicast router was detected.
A multicast router found on a local SAP has the value 'sap(1)'.
A multicast router detected on an SDP has the value 'sdp(2)'."
::= { alaIgmpServiceSapForwardEntry 1 }
alaIgmpServiceSapForwardPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSapForwardPortId indicates,
together with the object alaIgmpServiceSapForwardEncapValue, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
tlsIgmpSnpgMRouterLocale is 'sap(1)'."
::= { alaIgmpServiceSapForwardEntry 2 }
alaIgmpServiceSapForwardEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSapForwardEncapValue indicates,
together with the objectalaIgmpServiceSapForwardPortId, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSapForwardLocale is 'sap(1)'."
::= { alaIgmpServiceSapForwardEntry 3 }
alaIgmpServiceSapForwardSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSapForwardSdpId indicates,
together with the object alaIgmpServiceSapForwardVcId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSapForwardLocale is 'sdp(2)'."
::= { alaIgmpServiceSapForwardEntry 4 }
alaIgmpServiceSapForwardVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSapForwardVcId indicates,
together with the object alaIgmpServiceSapForwardSdpId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSapForwardLocale is 'sdp(2)'."
::= { alaIgmpServiceSapForwardEntry 5 }
alaIgmpServiceSapForwardGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 group address."
::= { alaIgmpServiceSapForwardEntry 6 }
alaIgmpServiceSapForwardHostAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 host address."
::= { alaIgmpServiceSapForwardEntry 7 }
alaIgmpServiceSapForwardDestAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 tunnel destination address."
::= { alaIgmpServiceSapForwardEntry 8 }
alaIgmpServiceSapForwardOrigAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 tunnel source address."
::= { alaIgmpServiceSapForwardEntry 9 }
alaIgmpServiceSapForwardType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's encapsulation type."
::= { alaIgmpServiceSapForwardEntry 10 }
alaIgmpServiceSapForwardNextSapPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast forwarded flow's next SAP. The ID of the access port where this SAP
is defined."
::= { alaIgmpServiceSapForwardEntry 11 }
alaIgmpServiceSapForwardNextSapEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast forwarded flow's next SAP. The value of the label used to identify this
SAP on the access port specified by sapPortId."
::= { alaIgmpServiceSapForwardEntry 12 }
alaIgmpServiceSapForwardNextType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's next encapsulation type."
::= { alaIgmpServiceSapForwardEntry 13 }
alaIgmpServiceSdpBindForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpServiceSdpBindForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast forward information."
::= { alaServiceMgrIgmp 16 }
alaIgmpServiceSdpBindForwardEntry OBJECT-TYPE
SYNTAX IgmpServiceSdpBindForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast forwarded flow."
INDEX {
svcId,
alaIgmpServiceSdpBindForwardGroupAddress,
alaIgmpServiceSdpBindForwardHostAddress,
alaIgmpServiceSdpBindForwardDestAddress,
alaIgmpServiceSdpBindForwardOrigAddress,
alaIgmpServiceSdpBindForwardNextSdpBindId
}
::= { alaIgmpServiceSdpBindForwardTable 1 }
IgmpServiceSdpBindForwardEntry ::= SEQUENCE {
alaIgmpServiceSdpBindForwardLocale AluLocation,
alaIgmpServiceSdpBindForwardPortId TmnxPortID,
alaIgmpServiceSdpBindForwardEncapValue TmnxEncapVal,
alaIgmpServiceSdpBindForwardSdpId SdpId,
alaIgmpServiceSdpBindForwardVcId TmnxVcIdOrNone,
alaIgmpServiceSdpBindForwardGroupAddress MacAddress,
alaIgmpServiceSdpBindForwardHostAddress MacAddress,
alaIgmpServiceSdpBindForwardDestAddress MacAddress,
alaIgmpServiceSdpBindForwardOrigAddress MacAddress,
alaIgmpServiceSdpBindForwardType INTEGER,
alaIgmpServiceSdpBindForwardNextSdpBindId SdpBindId,
alaIgmpServiceSdpBindForwardNextType INTEGER
}
alaIgmpServiceSdpBindForwardLocale OBJECT-TYPE
SYNTAX AluLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSdpBindForwardLocale indicates
where this multicast router was detected.
A multicast router found on a local SAP has the value 'sap(1)'.
A multicast router detected on an SDP has the value 'sdp(2)'."
::= { alaIgmpServiceSdpBindForwardEntry 1 }
alaIgmpServiceSdpBindForwardPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSdpBindForwardPortId indicates,
together with the object alaIgmpServiceSdpBindForwardEncapValue, the SdpBind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
tlsIgmpSnpgMRouterLocale is 'sap(1)'."
::= { alaIgmpServiceSdpBindForwardEntry 2 }
alaIgmpServiceSdpBindForwardEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSdpBindForwardEncapValue indicates,
together with the object alaIgmpServiceSdpBindForwardPortId, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSdpBindForwardLocale is 'sap(1)'."
::= { alaIgmpServiceSdpBindForwardEntry 3 }
alaIgmpServiceSdpBindForwardSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSdpBindForwardSdpId indicates,
together with the object alaIgmpServiceSdpBindForwardVcId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSdpBindForwardLocale is 'sdp(2)'."
::= { alaIgmpServiceSdpBindForwardEntry 4 }
alaIgmpServiceSdpBindForwardVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaIgmpServiceSdpBindForwardVcId indicates,
together with the object alaIgmpServiceSdpBindForwardSdpId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaIgmpServiceSdpBindForwardLocale is 'sdp(2)'."
::= { alaIgmpServiceSdpBindForwardEntry 5 }
alaIgmpServiceSdpBindForwardGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 group address."
::= { alaIgmpServiceSdpBindForwardEntry 6 }
alaIgmpServiceSdpBindForwardHostAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 host address."
::= { alaIgmpServiceSdpBindForwardEntry 7 }
alaIgmpServiceSdpBindForwardDestAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 tunnel destination address."
::= { alaIgmpServiceSdpBindForwardEntry 8 }
alaIgmpServiceSdpBindForwardOrigAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv4 tunnel source address."
::= { alaIgmpServiceSdpBindForwardEntry 9 }
alaIgmpServiceSdpBindForwardType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's encapsulation type."
::= { alaIgmpServiceSdpBindForwardEntry 10 }
alaIgmpServiceSdpBindForwardNextSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast forwarded flow's next sdpBind."
::= { alaIgmpServiceSdpBindForwardEntry 11 }
alaIgmpServiceSdpBindForwardNextType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's next encapsulation type."
::= { alaIgmpServiceSdpBindForwardEntry 12 }
--
-- SAP/SDPBIND Table for IP Multicast objects managed per SAP/SDPBIND
--
alaIgmpServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIgmpServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast port information."
::= { alaServiceMgrIgmp 17 }
alaIgmpServiceSapEntry OBJECT-TYPE
SYNTAX AlaIgmpServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to IP multicast Service SAP information."
INDEX {
svcId,
sapPortId,
sapEncapValue
}
::= { alaIgmpServiceSapTable 1 }
AlaIgmpServiceSapEntry ::=
SEQUENCE {
alaIgmpServiceSapMaxGroupLimit Unsigned32,
alaIgmpServiceSapMaxGroupExceedAction INTEGER,
alaIgmpServiceSapCurrentGroupCount Unsigned32
}
alaIgmpServiceSapMaxGroupLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of IGMP Group memberships that can be learnt
on the sap."
DEFVAL {0}
::= { alaIgmpServiceSapEntry 1 }
alaIgmpServiceSapMaxGroupExceedAction OBJECT-TYPE
SYNTAX INTEGER { none(0), drop(1), replace(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when IGMP group membership limit is
exceeded for the sap."
DEFVAL { none }
::= { alaIgmpServiceSapEntry 2 }
alaIgmpServiceSapCurrentGroupCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP multicast group memberships on a sap.
instance."
::= { alaIgmpServiceSapEntry 3 }
alaIgmpServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIgmpServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast port information."
::= { alaServiceMgrIgmp 18 }
alaIgmpServiceSdpBindEntry OBJECT-TYPE
SYNTAX AlaIgmpServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to IP multicast Service SdpBind information."
INDEX {
svcId,
sdpBindId
}
::= { alaIgmpServiceSdpBindTable 1 }
AlaIgmpServiceSdpBindEntry ::=
SEQUENCE {
alaIgmpServiceSdpBindMaxGroupLimit Unsigned32,
alaIgmpServiceSdpBindMaxGroupExceedAction INTEGER,
alaIgmpServiceSdpBindCurrentGroupCount Unsigned32
}
alaIgmpServiceSdpBindMaxGroupLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of IGMP Group memberships that can be learnt
on the SdpBind."
DEFVAL {0}
::= { alaIgmpServiceSdpBindEntry 1 }
alaIgmpServiceSdpBindMaxGroupExceedAction OBJECT-TYPE
SYNTAX INTEGER { none(0), drop(1), replace(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when IGMP group membership limit is
exceeded for the SdpBind."
DEFVAL { none }
::= { alaIgmpServiceSdpBindEntry 2 }
alaIgmpServiceSdpBindCurrentGroupCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP multicast group memberships on a SdpBind.
instance."
::= { alaIgmpServiceSdpBindEntry 3 }
--
-- Service MLD Configuration Table
--
alaServiceMgrMld OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 3 }
alaMldServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Service table contains the information on which IPv6 multicast
switching and routing is configured."
::= { alaServiceMgrMld 1 }
alaMldServiceEntry OBJECT-TYPE
SYNTAX MldServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponds to a service on which IPv6 multicast switching
and routing is configured."
INDEX {
svcId
}
::= { alaMldServiceTable 1 }
MldServiceEntry ::= SEQUENCE {
alaMldServiceStatus INTEGER,
alaMldServiceQuerying INTEGER,
alaMldServiceSpoofing INTEGER,
alaMldServiceZapping INTEGER,
alaMldServiceVersion Unsigned32,
alaMldServiceRobustness Unsigned32,
alaMldServiceQueryInterval Unsigned32,
alaMldServiceQueryResponseInterval Unsigned32,
alaMldServiceLastMemberQueryInterval Unsigned32,
alaMldServiceRouterTimeout Unsigned32,
alaMldServiceSourceTimeout Unsigned32,
alaMldServiceProxying INTEGER,
alaMldServiceUnsolicitedReportInterval Unsigned32,
alaMldServiceQuerierForwarding INTEGER,
alaMldServiceMaxGroupLimit Unsigned32,
alaMldServiceMaxGroupExceedAction INTEGER
}
alaMldServiceStatus OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable IPv6 multicast switching and routing
on the Service."
::= { alaMldServiceEntry 1 }
alaMldServiceQuerying OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable MLD Querying on the Service."
::= { alaMldServiceEntry 2 }
alaMldServiceSpoofing OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable MLD Spoofing on the Service."
::= { alaMldServiceEntry 3 }
alaMldServiceZapping OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable MLD Zapping on the Service."
::= { alaMldServiceEntry 4 }
alaMldServiceVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default MLD protocol Version running on the Service."
::= { alaMldServiceEntry 5 }
alaMldServiceRobustness OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Robustness variable used on the Service."
::= { alaMldServiceEntry 6 }
alaMldServiceQueryInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Query Interval used on the Service."
::= { alaMldServiceEntry 7 }
alaMldServiceQueryResponseInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Query Response Interval on the Service."
::= { alaMldServiceEntry 8 }
alaMldServiceLastMemberQueryInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "tenths of seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Last Member Query Interval on the Service."
::= { alaMldServiceEntry 9 }
alaMldServiceRouterTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Router Timeout on the Service."
::= { alaMldServiceEntry 10 }
alaMldServiceSourceTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Source Timeout on the Service."
::= { alaMldServiceEntry 11 }
alaMldServiceProxying OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable MLD Proxying on the Service."
::= { alaMldServiceEntry 12 }
alaMldServiceUnsolicitedReportInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the MLD Unsolicited Report Interval on the Service."
::= { alaMldServiceEntry 13 }
alaMldServiceQuerierForwarding OBJECT-TYPE
SYNTAX INTEGER { none(0), enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable MLD Querier Forwarding on the Service."
::= { alaMldServiceEntry 14 }
alaMldServiceMaxGroupLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of MLD Group memberships that can be learnt on the Service."
DEFVAL {0}
::= { alaMldServiceEntry 15 }
alaMldServiceMaxGroupExceedAction OBJECT-TYPE
SYNTAX INTEGER { none(0), drop(1), replace(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when the MLD group membership limit is exceeded on the Service."
DEFVAL { none }
::= { alaMldServiceEntry 16 }
--
-- Service Group Membership Table
--
alaMldMemberServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the MLD group membership information for SAPs."
::= { alaServiceMgrMld 2 }
alaMldMemberServiceSapEntry OBJECT-TYPE
SYNTAX MldMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an MLD group membership request."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaMldMemberServiceSapGroupAddressType,
alaMldMemberServiceSapGroupAddress,
alaMldMemberServiceSapSourceAddressType,
alaMldMemberServiceSapSourceAddress
}
::= { alaMldMemberServiceSapTable 1 }
MldMemberServiceSapEntry ::= SEQUENCE {
alaMldMemberServiceSapGroupAddressType InetAddressType,
alaMldMemberServiceSapGroupAddress InetAddress,
alaMldMemberServiceSapSourceAddressType InetAddressType,
alaMldMemberServiceSapSourceAddress InetAddress,
alaMldMemberServiceSapMode INTEGER,
alaMldMemberServiceSapCount Counter32,
alaMldMemberServiceSapTimeout TimeTicks
}
alaMldMemberServiceSapGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldMemberServiceSapEntry 1 }
alaMldMemberServiceSapGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv6 group address."
::= { alaMldMemberServiceSapEntry 2 }
alaMldMemberServiceSapSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldMemberServiceSapEntry 3 }
alaMldMemberServiceSapSourceAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv6 source address."
::= { alaMldMemberServiceSapEntry 4 }
alaMldMemberServiceSapMode OBJECT-TYPE
SYNTAX INTEGER { include(1), exclude(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's MLD source filter mode."
::= { alaMldMemberServiceSapEntry 5 }
alaMldMemberServiceSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's counter."
::= { alaMldMemberServiceSapEntry 6 }
alaMldMemberServiceSapTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's timeout."
::= { alaMldMemberServiceSapEntry 7 }
alaMldMemberServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the MLD group membership information for SDP bindings."
::= { alaServiceMgrMld 3 }
alaMldMemberServiceSdpBindEntry OBJECT-TYPE
SYNTAX MldMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an MLD group membership request."
INDEX {
svcId,
sdpBindId,
alaMldMemberServiceSdpBindGroupAddressType,
alaMldMemberServiceSdpBindGroupAddress,
alaMldMemberServiceSdpBindSourceAddressType,
alaMldMemberServiceSdpBindSourceAddress
}
::= { alaMldMemberServiceSdpBindTable 1 }
MldMemberServiceSdpBindEntry ::= SEQUENCE {
alaMldMemberServiceSdpBindGroupAddressType InetAddressType,
alaMldMemberServiceSdpBindGroupAddress InetAddress,
alaMldMemberServiceSdpBindSourceAddressType InetAddressType,
alaMldMemberServiceSdpBindSourceAddress InetAddress,
alaMldMemberServiceSdpBindMode INTEGER,
alaMldMemberServiceSdpBindCount Counter32,
alaMldMemberServiceSdpBindTimeout TimeTicks
}
alaMldMemberServiceSdpBindGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldMemberServiceSdpBindEntry 1 }
alaMldMemberServiceSdpBindGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv6 group address."
::= { alaMldMemberServiceSdpBindEntry 2 }
alaMldMemberServiceSdpBindSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldMemberServiceSdpBindEntry 3 }
alaMldMemberServiceSdpBindSourceAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group membership request's IPv6 source address."
::= { alaMldMemberServiceSdpBindEntry 4 }
alaMldMemberServiceSdpBindMode OBJECT-TYPE
SYNTAX INTEGER { include(1), exclude(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's MLD source filter mode."
::= { alaMldMemberServiceSdpBindEntry 5 }
alaMldMemberServiceSdpBindCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's counter."
::= { alaMldMemberServiceSdpBindEntry 6 }
alaMldMemberServiceSdpBindTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group membership request's timeout."
::= { alaMldMemberServiceSdpBindEntry 7 }
--
-- Static Group Membership Table
--
alaMldStaticMemberServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStaticMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap static MLD group membership information."
::= { alaServiceMgrMld 4 }
alaMldStaticMemberServiceSapEntry OBJECT-TYPE
SYNTAX MldStaticMemberServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a ervice sap static MLD group membership request."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaMldStaticMemberServiceSapGroupAddressType,
alaMldStaticMemberServiceSapGroupAddress
}
::= { alaMldStaticMemberServiceSapTable 1 }
MldStaticMemberServiceSapEntry ::= SEQUENCE {
alaMldStaticMemberServiceSapGroupAddressType InetAddressType,
alaMldStaticMemberServiceSapGroupAddress InetAddress,
alaMldStaticMemberServiceSapRowStatus RowStatus
}
alaMldStaticMemberServiceSapGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldStaticMemberServiceSapEntry 1 }
alaMldStaticMemberServiceSapGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service sap static group membership request's IPv6 group address."
::= { alaMldStaticMemberServiceSapEntry 2 }
alaMldStaticMemberServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaMldStaticMemberServiceSapEntry 3}
alaMldStaticMemberServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStaticMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sdp binding static MLD group membership information."
::= { alaServiceMgrMld 5 }
alaMldStaticMemberServiceSdpBindEntry OBJECT-TYPE
SYNTAX MldStaticMemberServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a service sdp binding static MLD group membership request."
INDEX {
svcId,
sdpBindId,
alaMldStaticMemberServiceSdpBindGroupAddressType,
alaMldStaticMemberServiceSdpBindGroupAddress
}
::= { alaMldStaticMemberServiceSdpBindTable 1 }
MldStaticMemberServiceSdpBindEntry ::= SEQUENCE {
alaMldStaticMemberServiceSdpBindGroupAddressType InetAddressType,
alaMldStaticMemberServiceSdpBindGroupAddress InetAddress,
alaMldStaticMemberServiceSdpBindRowStatus RowStatus
}
alaMldStaticMemberServiceSdpBindGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldStaticMemberServiceSdpBindEntry 1 }
alaMldStaticMemberServiceSdpBindGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The service sdp binding static group membership request's IPv6 group address."
::= { alaMldStaticMemberServiceSdpBindEntry 2 }
alaMldStaticMemberServiceSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaMldStaticMemberServiceSdpBindEntry 3}
--
-- Neighbor Table
--
alaMldNeighborServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap neighboring IP multicast routers."
::= { alaServiceMgrMld 6 }
alaMldNeighborServiceSapEntry OBJECT-TYPE
SYNTAX MldNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast router."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaMldNeighborServiceSapHostAddressType,
alaMldNeighborServiceSapHostAddress
}
::= { alaMldNeighborServiceSapTable 1 }
MldNeighborServiceSapEntry ::= SEQUENCE {
alaMldNeighborServiceSapHostAddressType InetAddressType,
alaMldNeighborServiceSapHostAddress InetAddress,
alaMldNeighborServiceSapCount Counter32,
alaMldNeighborServiceSapTimeout TimeTicks
}
alaMldNeighborServiceSapHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldNeighborServiceSapEntry 1 }
alaMldNeighborServiceSapHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast router's IPv6 host address."
::= { alaMldNeighborServiceSapEntry 2 }
alaMldNeighborServiceSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's counter."
::= { alaMldNeighborServiceSapEntry 3 }
alaMldNeighborServiceSapTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's timeout."
::= { alaMldNeighborServiceSapEntry 4 }
alaMldNeighborServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind neighboring IP multicast routers."
::= { alaServiceMgrMld 7 }
alaMldNeighborServiceSdpBindEntry OBJECT-TYPE
SYNTAX MldNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast router."
INDEX {
svcId,
sdpBindId,
alaMldNeighborServiceSdpBindHostAddressType,
alaMldNeighborServiceSdpBindHostAddress
}
::= { alaMldNeighborServiceSdpBindTable 1 }
MldNeighborServiceSdpBindEntry ::= SEQUENCE {
alaMldNeighborServiceSdpBindHostAddressType InetAddressType,
alaMldNeighborServiceSdpBindHostAddress InetAddress,
alaMldNeighborServiceSdpBindCount Counter32,
alaMldNeighborServiceSdpBindTimeout TimeTicks
}
alaMldNeighborServiceSdpBindHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldNeighborServiceSdpBindEntry 1 }
alaMldNeighborServiceSdpBindHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast router's IPv6 host address."
::= { alaMldNeighborServiceSdpBindEntry 2 }
alaMldNeighborServiceSdpBindCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's counter."
::= { alaMldNeighborServiceSdpBindEntry 3 }
alaMldNeighborServiceSdpBindTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast router's timeout."
::= { alaMldNeighborServiceSdpBindEntry 4 }
--
-- Static Neighbor Table
--
alaMldStaticNeighborServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStaticNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap static IP multicast routers."
::= { alaServiceMgrMld 8 }
alaMldStaticNeighborServiceSapEntry OBJECT-TYPE
SYNTAX MldStaticNeighborServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a service sap static IP multicast router."
INDEX {
svcId,
sapPortId,
sapEncapValue
}
::= { alaMldStaticNeighborServiceSapTable 1 }
MldStaticNeighborServiceSapEntry ::= SEQUENCE {
alaMldStaticNeighborServiceSapRowStatus RowStatus
}
alaMldStaticNeighborServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaMldStaticNeighborServiceSapEntry 1 }
alaMldStaticNeighborServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStaticNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind static IP multicast routers."
::= { alaServiceMgrMld 9 }
alaMldStaticNeighborServiceSdpBindEntry OBJECT-TYPE
SYNTAX MldStaticNeighborServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a service SdpBind static IP multicast router."
INDEX {
svcId,
sdpBindId
}
::= { alaMldStaticNeighborServiceSdpBindTable 1 }
MldStaticNeighborServiceSdpBindEntry ::= SEQUENCE {
alaMldStaticNeighborServiceSdpBindRowStatus RowStatus
}
alaMldStaticNeighborServiceSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaMldStaticNeighborServiceSdpBindEntry 1 }
--
-- Querier Table
--
alaMldQuerierServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap neighboring MLD queriers."
::= { alaServiceMgrMld 10 }
alaMldQuerierServiceSapEntry OBJECT-TYPE
SYNTAX MldQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an MLD querier."
INDEX {
svcId,
sapPortId,
sapEncapValue,
alaMldQuerierServiceSapHostAddressType,
alaMldQuerierServiceSapHostAddress
}
::= { alaMldQuerierServiceSapTable 1 }
MldQuerierServiceSapEntry ::= SEQUENCE {
alaMldQuerierServiceSapHostAddressType InetAddressType,
alaMldQuerierServiceSapHostAddress InetAddress,
alaMldQuerierServiceSapCount Counter32,
alaMldQuerierServiceSapTimeout TimeTicks
}
alaMldQuerierServiceSapHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldQuerierServiceSapEntry 1 }
alaMldQuerierServiceSapHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MLD querier's IPv6 host address."
::= { alaMldQuerierServiceSapEntry 2 }
alaMldQuerierServiceSapCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MLD querier's counter."
::= { alaMldQuerierServiceSapEntry 3 }
alaMldQuerierServiceSapTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MLD querier's timeout."
::= { alaMldQuerierServiceSapEntry 4 }
alaMldQuerierServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind neighboring MLD queriers."
::= { alaServiceMgrMld 11 }
alaMldQuerierServiceSdpBindEntry OBJECT-TYPE
SYNTAX MldQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an MLD querier."
INDEX {
svcId,
sdpBindId,
alaMldQuerierServiceSdpBindHostAddressType,
alaMldQuerierServiceSdpBindHostAddress
}
::= { alaMldQuerierServiceSdpBindTable 1 }
MldQuerierServiceSdpBindEntry ::= SEQUENCE {
alaMldQuerierServiceSdpBindHostAddressType InetAddressType,
alaMldQuerierServiceSdpBindHostAddress InetAddress,
alaMldQuerierServiceSdpBindCount Counter32,
alaMldQuerierServiceSdpBindTimeout TimeTicks
}
alaMldQuerierServiceSdpBindHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldQuerierServiceSdpBindEntry 1 }
alaMldQuerierServiceSdpBindHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MLD querier's IPv6 host address."
::= { alaMldQuerierServiceSdpBindEntry 2 }
alaMldQuerierServiceSdpBindCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MLD querier's counter."
::= { alaMldQuerierServiceSdpBindEntry 3 }
alaMldQuerierServiceSdpBindTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MLD querier's timeout."
::= { alaMldQuerierServiceSdpBindEntry 4 }
--
-- Static Querier Table
--
alaMldStaticQuerierServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStaticQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service sap static MLD queriers."
::= { alaServiceMgrMld 12 }
alaMldStaticQuerierServiceSapEntry OBJECT-TYPE
SYNTAX MldStaticQuerierServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a static MLD querier."
INDEX {
svcId,
sapPortId,
sapEncapValue
}
::= { alaMldStaticQuerierServiceSapTable 1 }
MldStaticQuerierServiceSapEntry ::= SEQUENCE {
alaMldStaticQuerierServiceSapRowStatus RowStatus
}
alaMldStaticQuerierServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaMldStaticQuerierServiceSapEntry 1 }
alaMldStaticQuerierServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldStaticQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the service SdpBind static MLD queriers."
::= { alaServiceMgrMld 13 }
alaMldStaticQuerierServiceSdpBindEntry OBJECT-TYPE
SYNTAX MldStaticQuerierServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to a static MLD querier."
INDEX {
svcId,
sdpBindId
}
::= { alaMldStaticQuerierServiceSdpBindTable 1 }
MldStaticQuerierServiceSdpBindEntry ::= SEQUENCE {
alaMldStaticQuerierServiceSdpBindRowStatus RowStatus
}
alaMldStaticQuerierServiceSdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in accordance with installation and removal conventions
for conceptual rows."
::= { alaMldStaticQuerierServiceSdpBindEntry 1 }
--
-- Source Table
--
alaMldServiceSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldServiceSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Service IP multicast source information."
::= { alaServiceMgrMld 14 }
alaMldServiceSourceEntry OBJECT-TYPE
SYNTAX MldServiceSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast source flow."
INDEX {
svcId,
alaMldServiceSourceGroupAddressType,
alaMldServiceSourceGroupAddress,
alaMldServiceSourceHostAddressType,
alaMldServiceSourceHostAddress,
alaMldServiceSourceDestAddressType,
alaMldServiceSourceDestAddress,
alaMldServiceSourceOrigAddressType,
alaMldServiceSourceOrigAddress
}
::= { alaMldServiceSourceTable 1 }
MldServiceSourceEntry ::= SEQUENCE {
alaMldServiceSourceGroupAddressType InetAddressType,
alaMldServiceSourceGroupAddress InetAddress,
alaMldServiceSourceHostAddressType InetAddressType,
alaMldServiceSourceHostAddress InetAddress,
alaMldServiceSourceDestAddressType InetAddressType,
alaMldServiceSourceDestAddress InetAddress,
alaMldServiceSourceOrigAddressType InetAddressType,
alaMldServiceSourceOrigAddress InetAddress,
alaMldServiceSourceLocale AluLocation,
alaMldServiceSourcePortId TmnxPortID,
alaMldServiceSourceEncapValue TmnxEncapVal,
alaMldServiceSourceSdpId SdpId,
alaMldServiceSourceVcId TmnxVcIdOrNone,
alaMldServiceSourceType INTEGER
}
alaMldServiceSourceGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldServiceSourceEntry 1 }
alaMldServiceSourceGroupAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv6 group address."
::= { alaMldServiceSourceEntry 2 }
alaMldServiceSourceHostAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldServiceSourceEntry 3 }
alaMldServiceSourceHostAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv6 host address."
::= { alaMldServiceSourceEntry 4 }
alaMldServiceSourceDestAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldServiceSourceEntry 5 }
alaMldServiceSourceDestAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv6 tunnel destination address."
::= { alaMldServiceSourceEntry 6 }
alaMldServiceSourceOrigAddressType OBJECT-TYPE
SYNTAX InetAddressType (2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type. This release only supports IPv6."
::= { alaMldServiceSourceEntry 7 }
alaMldServiceSourceOrigAddress OBJECT-TYPE
SYNTAX InetAddress(SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast source flow's IPv6 tunnel source address."
::= { alaMldServiceSourceEntry 8 }
alaMldServiceSourceLocale OBJECT-TYPE
SYNTAX AluLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSourceLocale indicates
where this multicast router was detected.
A multicast router found on a local SAP has the value 'sap(1)'.
A multicast router detected on an SDP has the value 'sdp(2)'."
::= { alaMldServiceSourceEntry 9 }
alaMldServiceSourcePortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSourcePortId indicates,
together with the object alaMldServiceSourceEncapValue, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
tlsMldSnpgMRouterLocale is 'sap(1)'."
::= { alaMldServiceSourceEntry 10 }
alaMldServiceSourceEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSourceEncapValue indicates,
together with the objectalaMldServiceSourcePortId, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSourceLocale is 'sap(1)'."
::= { alaMldServiceSourceEntry 11 }
alaMldServiceSourceSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSourceSdpId indicates,
together with the object alaMldServiceSourceVcId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSourceLocale is 'sdp(2)'."
::= { alaMldServiceSourceEntry 12 }
alaMldServiceSourceVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSourceVcId indicates,
together with the object alaMldServiceSourceSdpId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSourceLocale is 'sdp(2)'."
::= { alaMldServiceSourceEntry 13 }
alaMldServiceSourceType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast source flow's encapsulation type."
::= { alaMldServiceSourceEntry 14 }
--
-- Forward Table
--
alaMldServiceSapForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldServiceSapForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast forward information."
::= { alaServiceMgrMld 15 }
alaMldServiceSapForwardEntry OBJECT-TYPE
SYNTAX MldServiceSapForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast forwarded flow."
INDEX {
svcId,
alaMldServiceSapForwardGroupAddress,
alaMldServiceSapForwardHostAddress,
alaMldServiceSapForwardDestAddress,
alaMldServiceSapForwardOrigAddress,
alaMldServiceSapForwardNextSapPortId,
alaMldServiceSapForwardNextSapEncapValue
}
::= { alaMldServiceSapForwardTable 1 }
MldServiceSapForwardEntry ::= SEQUENCE {
alaMldServiceSapForwardLocale AluLocation,
alaMldServiceSapForwardPortId TmnxPortID,
alaMldServiceSapForwardEncapValue TmnxEncapVal,
alaMldServiceSapForwardSdpId SdpId,
alaMldServiceSapForwardVcId TmnxVcIdOrNone,
alaMldServiceSapForwardGroupAddress MacAddress,
alaMldServiceSapForwardHostAddress MacAddress,
alaMldServiceSapForwardDestAddress MacAddress,
alaMldServiceSapForwardOrigAddress MacAddress,
alaMldServiceSapForwardType INTEGER,
alaMldServiceSapForwardNextSapPortId TmnxPortID,
alaMldServiceSapForwardNextSapEncapValue TmnxEncapVal,
alaMldServiceSapForwardNextType INTEGER
}
alaMldServiceSapForwardLocale OBJECT-TYPE
SYNTAX AluLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSapForwardLocale indicates
where this multicast router was detected.
A multicast router found on a local SAP has the value 'sap(1)'.
A multicast router detected on an SDP has the value 'sdp(2)'."
::= { alaMldServiceSapForwardEntry 1 }
alaMldServiceSapForwardPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSapForwardPortId indicates,
together with the object alaMldServiceSapForwardEncapValue, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
tlsMldSnpgMRouterLocale is 'sap(1)'."
::= { alaMldServiceSapForwardEntry 2 }
alaMldServiceSapForwardEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSapForwardEncapValue indicates,
together with the objectalaMldServiceSapForwardPortId, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSapForwardLocale is 'sap(1)'."
::= { alaMldServiceSapForwardEntry 3 }
alaMldServiceSapForwardSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSapForwardSdpId indicates,
together with the object alaMldServiceSapForwardVcId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSapForwardLocale is 'sdp(2)'."
::= { alaMldServiceSapForwardEntry 4 }
alaMldServiceSapForwardVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSapForwardVcId indicates,
together with the object alaMldServiceSapForwardSdpId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSapForwardLocale is 'sdp(2)'."
::= { alaMldServiceSapForwardEntry 5 }
alaMldServiceSapForwardGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 group address."
::= { alaMldServiceSapForwardEntry 6 }
alaMldServiceSapForwardHostAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 host address."
::= { alaMldServiceSapForwardEntry 7 }
alaMldServiceSapForwardDestAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 tunnel destination address."
::= { alaMldServiceSapForwardEntry 8 }
alaMldServiceSapForwardOrigAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 tunnel source address."
::= { alaMldServiceSapForwardEntry 9 }
alaMldServiceSapForwardType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's encapsulation type."
::= { alaMldServiceSapForwardEntry 10 }
alaMldServiceSapForwardNextSapPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast forwarded flow's next SAP. The ID of the access port where this SAP
is defined."
::= { alaMldServiceSapForwardEntry 11 }
alaMldServiceSapForwardNextSapEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast forwarded flow's next SAP. The value of the label used to identify this
SAP on the access port specified by sapPortId."
::= { alaMldServiceSapForwardEntry 12 }
alaMldServiceSapForwardNextType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's next encapsulation type."
::= { alaMldServiceSapForwardEntry 13 }
alaMldServiceSdpBindForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldServiceSdpBindForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast forward information."
::= { alaServiceMgrMld 16 }
alaMldServiceSdpBindForwardEntry OBJECT-TYPE
SYNTAX MldServiceSdpBindForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to an IP multicast forwarded flow."
INDEX {
svcId,
alaMldServiceSdpBindForwardGroupAddress,
alaMldServiceSdpBindForwardHostAddress,
alaMldServiceSdpBindForwardDestAddress,
alaMldServiceSdpBindForwardOrigAddress,
alaMldServiceSdpBindForwardNextSdpBindId
}
::= { alaMldServiceSdpBindForwardTable 1 }
MldServiceSdpBindForwardEntry ::= SEQUENCE {
alaMldServiceSdpBindForwardLocale AluLocation,
alaMldServiceSdpBindForwardPortId TmnxPortID,
alaMldServiceSdpBindForwardEncapValue TmnxEncapVal,
alaMldServiceSdpBindForwardSdpId SdpId,
alaMldServiceSdpBindForwardVcId TmnxVcIdOrNone,
alaMldServiceSdpBindForwardGroupAddress MacAddress,
alaMldServiceSdpBindForwardHostAddress MacAddress,
alaMldServiceSdpBindForwardDestAddress MacAddress,
alaMldServiceSdpBindForwardOrigAddress MacAddress,
alaMldServiceSdpBindForwardType INTEGER,
alaMldServiceSdpBindForwardNextSdpBindId SdpBindId,
alaMldServiceSdpBindForwardNextType INTEGER
}
alaMldServiceSdpBindForwardLocale OBJECT-TYPE
SYNTAX AluLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSdpBindForwardLocale indicates
where this multicast router was detected.
A multicast router found on a local SAP has the value 'sap(1)'.
A multicast router detected on an SDP has the value 'sdp(2)'."
::= { alaMldServiceSdpBindForwardEntry 1 }
alaMldServiceSdpBindForwardPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSdpBindForwardPortId indicates,
together with the object alaMldServiceSdpBindForwardEncapValue, the SdpBind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
tlsMldSnpgMRouterLocale is 'sap(1)'."
::= { alaMldServiceSdpBindForwardEntry 2 }
alaMldServiceSdpBindForwardEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSdpBindForwardEncapValue indicates,
together with the object alaMldServiceSdpBindForwardPortId, the SAP
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSdpBindForwardLocale is 'sap(1)'."
::= { alaMldServiceSdpBindForwardEntry 3 }
alaMldServiceSdpBindForwardSdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSdpBindForwardSdpId indicates,
together with the object alaMldServiceSdpBindForwardVcId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSdpBindForwardLocale is 'sdp(2)'."
::= { alaMldServiceSdpBindForwardEntry 4 }
alaMldServiceSdpBindForwardVcId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object alaMldServiceSdpBindForwardVcId indicates,
together with the object alaMldServiceSdpBindForwardSdpId, the SDP Bind
on which this multicast router is detected.
The value of this object is only meaningful when the value of
alaMldServiceSdpBindForwardLocale is 'sdp(2)'."
::= { alaMldServiceSdpBindForwardEntry 5 }
alaMldServiceSdpBindForwardGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 group address."
::= { alaMldServiceSdpBindForwardEntry 6 }
alaMldServiceSdpBindForwardHostAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 host address."
::= { alaMldServiceSdpBindForwardEntry 7 }
alaMldServiceSdpBindForwardDestAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 tunnel destination address."
::= { alaMldServiceSdpBindForwardEntry 8 }
alaMldServiceSdpBindForwardOrigAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's IPv6 tunnel source address."
::= { alaMldServiceSdpBindForwardEntry 9 }
alaMldServiceSdpBindForwardType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's encapsulation type."
::= { alaMldServiceSdpBindForwardEntry 10 }
alaMldServiceSdpBindForwardNextSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP multicast forwarded flow's next sdpBind."
::= { alaMldServiceSdpBindForwardEntry 11 }
alaMldServiceSdpBindForwardNextType OBJECT-TYPE
SYNTAX INTEGER { mcast(1), pim(2), ipip(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast forwarded flow's next encapsulation type."
::= { alaMldServiceSdpBindForwardEntry 12 }
--
-- SAP/SDPBIND Table for IP Multicast objects managed per SAP/SDPBIND
--
alaMldServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaMldServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast port information."
::= { alaServiceMgrMld 17 }
alaMldServiceSapEntry OBJECT-TYPE
SYNTAX AlaMldServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to IP multicast Service SAP information."
INDEX {
svcId,
sapPortId,
sapEncapValue
}
::= { alaMldServiceSapTable 1 }
AlaMldServiceSapEntry ::=
SEQUENCE {
alaMldServiceSapMaxGroupLimit Unsigned32,
alaMldServiceSapMaxGroupExceedAction INTEGER,
alaMldServiceSapCurrentGroupCount Unsigned32
}
alaMldServiceSapMaxGroupLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of MLD Group memberships that can be learnt
on the sap."
DEFVAL {0}
::= { alaMldServiceSapEntry 1 }
alaMldServiceSapMaxGroupExceedAction OBJECT-TYPE
SYNTAX INTEGER { none(0), drop(1), replace(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when MLD group membership limit is
exceeded for the sap."
DEFVAL { none }
::= { alaMldServiceSapEntry 2 }
alaMldServiceSapCurrentGroupCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP multicast group memberships on a sap.
instance."
::= { alaMldServiceSapEntry 3 }
alaMldServiceSdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaMldServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IP multicast port information."
::= { alaServiceMgrMld 18 }
alaMldServiceSdpBindEntry OBJECT-TYPE
SYNTAX AlaMldServiceSdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to IP multicast Service SdpBind information."
INDEX {
svcId,
sdpBindId
}
::= { alaMldServiceSdpBindTable 1 }
AlaMldServiceSdpBindEntry ::=
SEQUENCE {
alaMldServiceSdpBindMaxGroupLimit Unsigned32,
alaMldServiceSdpBindMaxGroupExceedAction INTEGER,
alaMldServiceSdpBindCurrentGroupCount Unsigned32
}
alaMldServiceSdpBindMaxGroupLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of MLD Group memberships that can be learnt
on the SdpBind."
DEFVAL {0}
::= { alaMldServiceSdpBindEntry 1 }
alaMldServiceSdpBindMaxGroupExceedAction OBJECT-TYPE
SYNTAX INTEGER { none(0), drop(1), replace(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken when MLD group membership limit is
exceeded for the SdpBind."
DEFVAL { none }
::= { alaMldServiceSdpBindEntry 2 }
alaMldServiceSdpBindCurrentGroupCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP multicast group memberships on a SdpBind.
instance."
::= { alaMldServiceSdpBindEntry 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- AOS LDP related MIB
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaExtraLdp OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 4 }
alaVRtrExtendedLdpGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVRtrExtendedLdpGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"alaVRtrExtendedLdpGeneralTable is an extension to vRtrLdpGeneralTable
and it has an entry for each virtual router
in the system capable of supporting an instance of the
Label Distribution Protocol (LDP)."
::= { alaExtraLdp 1 }
alaVRtrExtendedLdpGeneralEntry OBJECT-TYPE
SYNTAX AlaVRtrExtendedLdpGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an instance of the Label Distribution
Protocol (LDP) for a virtual router in the system.
An entry in this table is created by the agent when vRtrLdpStatus
in the vRtrConfTable is set to 'create'.
The entry is destroyed when vRtrLdpStatus is set to 'delete' but
only if vRtrLdpGenAdminState has a value of 'outOfService'."
INDEX { alaVRtrLdpGenvRtrID }
::= { alaVRtrExtendedLdpGeneralTable 1 }
AlaVRtrExtendedLdpGeneralEntry ::= SEQUENCE {
alaVRtrLdpGenGracefulRestartSupport TruthValue,
alaVRtrLdpGenGRReconnectTime Unsigned32,
alaVRtrLdpGenGRFwdStateHoldTime Unsigned32,
alaVRtrLdpGenvRtrID TmnxVRtrID
}
alaVRtrLdpGenGracefulRestartSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of alaVRtrLdpGenGracefulRestartSupport specifies whether
restarting the LSR gracefully during a control plane restart is
allowed. When this object has a value of 'true',
graceful restart procedures are enabled. When its value is 'false',
graceful restart procedures are disabled."
DEFVAL { false }
::= { alaVRtrExtendedLdpGeneralEntry 1 }
alaVRtrLdpGenGRReconnectTime OBJECT-TYPE
SYNTAX Unsigned32 (5..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of alaVRtrLdpGenGRReconnectTime
specifies the value of FT Reconnect timer.
The FT Reconnect timeout is the time that the sender of the TLV would like the receiver
of that TLV to wait after the receiver detects the failure of LDP communication with the sender.
This object has meaning only when alaVRtrLdpGenGracefulRestartSupport is true."
DEFVAL { 120 }
::= { alaVRtrExtendedLdpGeneralEntry 2 }
alaVRtrLdpGenGRFwdStateHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (15..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpGenGRFwdStateHoldTime specifies the MPLS
forwarding state hold timer. If the forwarding state has been
preserved during a control plane restart, then the LSR starts this
timer and marks all forwarding entries as stale. At the expiration of
the timer all the entries that are still marked as stale are deleted.
The value of Recovery Time advertised to the neighbors in the FT
session TLV is set to the current value of the timer at the point in
which the Initialization message carrying the FT session TLV is sent"
DEFVAL { 120 }
::= { alaVRtrExtendedLdpGeneralEntry 3}
alaVRtrLdpGenvRtrID OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique value which identifies this virtual router in the Tmnx
system. The vRtrID value for each virtual router must remain
constant at least from one re-initialization of the system
management processor (CPM) to the next. There will always be at
least one router entry defined by the agent with vRtrID=1 which
represents the transport router."
::= { alaVRtrExtendedLdpGeneralEntry 4 }
alaVRtrLdpExtendedSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVRtrLdpExtendedSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"alaVRtrLdpExtendedSessionTable is an extension to vRtrLdpSessionTable.
This isa read-only table which parallels the
mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this
table is to keep information about a single session between
an LDP entity and an LDP Peer"
::= { alaExtraLdp 2 }
alaVRtrLdpExtendedSessionEntry OBJECT-TYPE
SYNTAX AlaVRtrLdpExtendedSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents information about a single
session between an LDP entity and an LDP Peer."
INDEX { alaVRtrLdpSessvRtrID,
alaVRtrLdpPeerLdpId }
::= { alaVRtrLdpExtendedSessionTable 1 }
AlaVRtrLdpExtendedSessionEntry ::= SEQUENCE {
alaVRtrLdpPeerLdpId MplsLdpIdentifier,
alaVRtrLdpSessRestartInProgress TruthValue,
alaVRtrLdpSessFtReconTimeAdvertised Unsigned32,
alaVRtrLdpSessFtRecoveryTimeAdvertised Unsigned32,
alaVRtrLdpSessvRtrID TmnxVRtrID
}
alaVRtrLdpPeerLdpId OBJECT-TYPE
SYNTAX MplsLdpIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of alaVRtrLdpSessLocalLdpId specifies the local LDP
identifier for this LDP session."
::= { alaVRtrLdpExtendedSessionEntry 1 }
alaVRtrLdpSessRestartInProgress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of alaVRtrLdpSessRestartInProgress indicates whether
graceful restart is in progress for this session"
::= { alaVRtrLdpExtendedSessionEntry 2 }
alaVRtrLdpSessFtReconTimeAdvertised OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of alaVRtrLdpSessFtReconTimeAdvertised indicates the session's
Fault Tolerant(FT) Reconnect Timeout advertised to the peer"
::= { alaVRtrLdpExtendedSessionEntry 3 }
alaVRtrLdpSessFtRecoveryTimeAdvertised OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of alaVRtrLdpSessFtRecoveryTimeAdvertised indicates the session's
Fault Tolerant(FT) recovery timeout that was advertised to the peer."
::= { alaVRtrLdpExtendedSessionEntry 4 }
alaVRtrLdpSessvRtrID OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique value which identifies this virtual router in the Tmnx
system. The vRtrID value for each virtual router must remain
constant at least from one re-initialization of the system
management processor (CPM) to the next. There will always be at
least one router entry defined by the agent with vRtrID=1 which
represents the transport router."
::= { alaVRtrLdpExtendedSessionEntry 5 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- AOS RFP OVER SPB related MIB
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaRfpSpb OBJECT IDENTIFIER ::= { alcatelIND1ServiceMgrMIBObjects 5 }
alaRfpSpbLocalEndPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRfpSpbLocalEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has the information about the local end points for the
point to point service."
::= { alaRfpSpb 1 }
alaRfpSpbLocalEndPointEntry OBJECT-TYPE
SYNTAX AlaRfpSpbLocalEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Local End Point Entry."
INDEX { alaRfpSpbLocalEndPointRfp, alaRfpSpbLocalEndPoint }
::= { alaRfpSpbLocalEndPointTable 1 }
AlaRfpSpbLocalEndPointEntry ::= SEQUENCE
{
alaRfpSpbLocalEndPointRfp Unsigned32,
alaRfpSpbLocalEndPoint Unsigned32,
alaRfpSpbLocalEndPointCcmInterval INTEGER,
alaRfpSpbLocalEndPointAdminStatus INTEGER,
alaRfpSpbLocalEndPointLevel Integer32,
alaRfpSpbLocalEndPointCBVlan Integer32,
alaRfpSpbLocalEndPointMaintDomain SnmpAdminString,
alaRfpSpbLocalEndPointMaintAssociation SnmpAdminString,
alaRfpSpbLocalEndPointRowStatus RowStatus
}
alaRfpSpbLocalEndPointRfp OBJECT-TYPE
SYNTAX Unsigned32(1..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the id for the RFP domain."
::= { alaRfpSpbLocalEndPointEntry 1 }
alaRfpSpbLocalEndPoint OBJECT-TYPE
SYNTAX Unsigned32(1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the local end point number for Virtual UP MEP used in Ethernet OAM."
::= { alaRfpSpbLocalEndPointEntry 2 }
alaRfpSpbLocalEndPointCcmInterval OBJECT-TYPE
SYNTAX INTEGER { oneSecond(1), oneMinute(2), tenSeconds(3), tenMinutes(4), hundredMilliSeconds(5) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the Continuity Check Messages Interval."
DEFVAL { oneSecond }
::= { alaRfpSpbLocalEndPointEntry 3 }
alaRfpSpbLocalEndPointAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The admin status of this local end point
enable: This will trigger generation of CCM messages.
disable: This will stop generation of CCM messages.
"
DEFVAL { enable }
::= { alaRfpSpbLocalEndPointEntry 4 }
alaRfpSpbLocalEndPointLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the level at which the maintenance domain will be created."
::= { alaRfpSpbLocalEndPointEntry 5 }
alaRfpSpbLocalEndPointCBVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the primary VLAN used in the maintenance association for OAM domain."
::= { alaRfpSpbLocalEndPointEntry 6 }
alaRfpSpbLocalEndPointMaintDomain OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the name used for OAM maintenance domain in a string format."
::= { alaRfpSpbLocalEndPointEntry 7 }
alaRfpSpbLocalEndPointMaintAssociation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the name used for OAM maintenance association in a string format."
::= { alaRfpSpbLocalEndPointEntry 8 }
alaRfpSpbLocalEndPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { alaRfpSpbLocalEndPointEntry 9 }
alaRfpSpbRemoteEndPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRfpRemoteEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has the information about the remote end points for the
point to point service."
::= { alaRfpSpb 2 }
alaRfpSpbRemoteEndPointEntry OBJECT-TYPE
SYNTAX AlaRfpRemoteEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Remote End Point Entry."
INDEX { alaRfpSpbRemoteEndPointRfp, alaRfpSpbRemoteEndPoint , alaRfpSpbRemoteEndPointServiceID }
::= { alaRfpSpbRemoteEndPointTable 1 }
AlaRfpRemoteEndPointEntry ::= SEQUENCE
{
alaRfpSpbRemoteEndPointRfp Unsigned32,
alaRfpSpbRemoteEndPoint Unsigned32,
alaRfpSpbRemoteEndPointServiceID Unsigned32,
alaRfpSpbRemoteEndPointStatus INTEGER,
alaRfpSpbRemoteEndPointSystemName SnmpAdminString,
alaRfpSpbRemoteEndPointISID Integer32,
alaRfpSpbRemoteEndPointBVlan Integer32,
alaRfpSpbRemoteEndPointRowStatus RowStatus
}
alaRfpSpbRemoteEndPointRfp OBJECT-TYPE
SYNTAX Unsigned32(1..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the id for the RFP domain."
::= { alaRfpSpbRemoteEndPointEntry 1 }
alaRfpSpbRemoteEndPoint OBJECT-TYPE
SYNTAX Unsigned32(1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These are the remote end point numbers allowed by the maintenance domain/level."
::= { alaRfpSpbRemoteEndPointEntry 2 }
alaRfpSpbRemoteEndPointServiceID OBJECT-TYPE
SYNTAX Unsigned32(1..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the service id learnt from remote end point."
::= { alaRfpSpbRemoteEndPointEntry 3 }
alaRfpSpbRemoteEndPointStatus OBJECT-TYPE
SYNTAX INTEGER { ok (1), failed(2), unknown(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the remote BEB (Back Bone Edge Bridge) status."
::= { alaRfpSpbRemoteEndPointEntry 4 }
alaRfpSpbRemoteEndPointSystemName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the system name of remote BEB."
::= { alaRfpSpbRemoteEndPointEntry 5 }
alaRfpSpbRemoteEndPointISID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ISID value associated with service id from remote end point."
::= { alaRfpSpbRemoteEndPointEntry 6 }
alaRfpSpbRemoteEndPointBVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the BVLAN value associated with a service Id from remote end point."
::= { alaRfpSpbRemoteEndPointEntry 7 }
alaRfpSpbRemoteEndPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote End Point Entry Status."
::= { alaRfpSpbRemoteEndPointEntry 8 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Service Manager Trap Object Definition
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
smgrServiceError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSvcType, alaSvcIsid, alaSvcBVlan, alaSvcMulticastMode}
STATUS current
DESCRIPTION
"A major trap to indicate a failure to create/delete a service successfully."
::= { alaServiceMgrNotifications 1 }
smgrServiceHwError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSvcType, alaSvcVFI, alaSvcMcIndex }
STATUS current
DESCRIPTION
"A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a service,
or to program the hardware tables for a service successfully."
::= { alaServiceMgrNotifications 2 }
smgrSapError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSapPortId, alaSapEncapValue }
STATUS current
DESCRIPTION
"A major trap to indicate a failure to create/delete a Service Access Point successfully."
::= { alaServiceMgrNotifications 3 }
smgrSapHwError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSapPortId, alaSapEncapValue, alaSvcVFI, alaSapVirtualPort }
STATUS current
DESCRIPTION
"A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a SAP,
or to program the hardware tables for a SAP successfully."
::= { alaServiceMgrNotifications 4 }
smgrSdpError NOTIFICATION-TYPE
OBJECTS { alaSdpId, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId }
STATUS current
DESCRIPTION
"A major trap to indicate a failure to create/delete a Service Distribution Point successfully."
::= { alaServiceMgrNotifications 5 }
smgrSdpHwError NOTIFICATION-TYPE
OBJECTS { alaSdpId, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId }
STATUS current
DESCRIPTION
"A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a SDP,
or to program the hardware tables for a SDP successfully."
::= { alaServiceMgrNotifications 6 }
smgrSdpBindError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSdpBindId, alaSdpBindNetworkPort, alaSdpBindBVlan, alaSdpBindSystemId }
STATUS current
DESCRIPTION
"A major trap to indicate a failure to create/delete a SDP Bind successfully."
::= { alaServiceMgrNotifications 7 }
smgrSdpBindHwError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSdpBindId, alaSdpBindNetworkPort, alaSdpBindBVlan, alaSdpBindSystemId, alaSdpBindVirtualPort }
STATUS current
DESCRIPTION
"A critical trap to indicate a failure to allocate/de-allocate a hardware resource for a SDP Bind,
or to program the hardware tables for a SDP Bind successfully."
::= { alaServiceMgrNotifications 8 }
smgrGeneralError NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSvcType }
STATUS current
DESCRIPTION
"A major trap to indicate a general system failure detected during normal system operation."
::= { alaServiceMgrNotifications 9 }
smgrStatusChange NOTIFICATION-TYPE
OBJECTS { alaSvcId, alaSvcType, alaSvcOperStatus, alaSvcNumSaps, alaSvcNumSdps }
STATUS deprecated
DESCRIPTION
"A trap to indicate a status change for a group of selected services."
::= { alaServiceMgrNotifications 10 }
smgrServiceStatusChange NOTIFICATION-TYPE
OBJECTS {alaSvcId, alaSvcType, alaSvcOperStatus, alaSvcIsid, alaSvcBVlan, alaSvcMulticastMode}
STATUS current
DESCRIPTION
"A change in service operating status. A service is operationally up when it's admin-up and there's at least
one active SAP or one active bind that is operationally up."
::= { alaServiceMgrNotifications 11}
smgrSapStatusChange NOTIFICATION-TYPE
OBJECTS {alaSvcId, alaSapPortId, alaSapEncapValue, alaSapOperStatus}
STATUS current
DESCRIPTION
"A change in SAP operating status. A SAP is operationally up when it's admin-up and the link status of the
physical or logical port of the SAP is operationally up."
::= { alaServiceMgrNotifications 12 }
smgrSdpStatusChange NOTIFICATION-TYPE
OBJECTS {alaSdpId, alaSdpOperStatus, alaSdpNetworkPort, alaSdpBVlan, alaSdpSystemId,
alaSdpSystemName, alaSdpDynamicType, alaSdpIsid}
STATUS current
DESCRIPTION
"A change in SDP operating status. For SPB, the SDP is dynamically created or destroyed as calculated by
ISIS protocol when a unicast/multicast path to reach a neighbor node is determined."
::= { alaServiceMgrNotifications 13 }
smgrSdpBindStatusChange NOTIFICATION-TYPE
OBJECTS {alaSvcId, alaSdpBindId, alaSdpBindOperStatus, alaSdpBindNetworkPort, alaSdpBindBVlan,
alaSdpBindSystemId, alaSdpBindSystemName, alaSdpBindIsid}
STATUS current
DESCRIPTION
"A change in SDP Bind operating status. For SPB, the SDP Bind is dynamically created or destroyed as detected
by ISIS when the same isid is configured in the neighbor node."
::= { alaServiceMgrNotifications 14 }
smgrVxlanSdpBindStatusChange NOTIFICATION-TYPE
OBJECTS {alaSvcId, alaSdpBindId, alaSdpBindOperStatus, alaSdpBindFarEndIpAddress,
alaSdpBindVnid}
STATUS current
DESCRIPTION
"A change in SDP Bind operating status. A SDP Bind is dynamically created as a VTEP is discovered, or
destroyed when the reachability to the VTEP is gone."
::= { alaServiceMgrNotifications 15 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1ServiceMgrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for service manager."
MODULE MANDATORY-GROUPS
{
alaServiceMgrPortProfileGroup,
alaServiceMgrPortGroup,
alaSapExtraInfoGroup,
alaIgmpServiceGroup,
alaIgmpMemberServiceSapGroup,
alaIgmpMemberServiceSdpBindGroup,
alaIgmpStaticMemberServiceSapGroup,
alaIgmpStaticMemberServiceSdpBindGroup,
alaIgmpNeighborServiceSapGroup,
alaIgmpNeighborServiceSdpBindGroup,
alaIgmpStaticNeighborServiceSapGroup,
alaIgmpStaticNeighborServiceSdpBindGroup,
alaIgmpQuerierServiceSapGroup,
alaIgmpQuerierServiceSdpBindGroup,
alaIgmpStaticQuerierServiceSapGroup,
alaIgmpStaticQuerierServiceSdpBindGroup,
alaIgmpServiceSourceGroup,
alaIgmpServiceSapForwardGroup,
alaIgmpServiceSdpBindForwardGroup,
alaIgmpServiceSapGroup,
alaIgmpServiceSdpBindGroup,
alaMldServiceGroup,
alaMldMemberServiceSapGroup,
alaMldMemberServiceSdpBindGroup,
alaMldStaticMemberServiceSapGroup,
alaMldStaticMemberServiceSdpBindGroup,
alaMldNeighborServiceSapGroup,
alaMldNeighborServiceSdpBindGroup,
alaMldStaticNeighborServiceSapGroup,
alaMldStaticNeighborServiceSdpBindGroup,
alaMldQuerierServiceSapGroup,
alaMldQuerierServiceSdpBindGroup,
alaMldStaticQuerierServiceSapGroup,
alaMldStaticQuerierServiceSdpBindGroup,
alaMldServiceSourceGroup,
alaMldServiceSapForwardGroup,
alaMldServiceSdpBindForwardGroup,
alaMldServiceSapGroup,
alaMldServiceSdpBindGroup,
alaVRtrExtendedLdpGeneralGroup,
alaVRtrLdpExtendedSessionGroup,
alaSvcBaseInfoEntryGroup,
alaSapBaseInfoEntryGroup,
alaSdpInfoTableGroup,
alaSdpBindTableGroup,
alaSvcMgrSysTableGroup,
alaSvcMgrEndPointGroup
}
::= { alcatelIND1ServiceMgrMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaServiceMgrPortProfileGroup OBJECT-GROUP
OBJECTS
{
alaServiceMgrPortProfileStpBpduTreatment,
alaServiceMgrPortProfile8021xTreatment,
alaServiceMgrPortProfile8021ABTreatment,
alaServiceMgrPortProfile8023adTreatment,
alaServiceMgrPortProfileGvrpTreatment,
alaServiceMgrPortProfileAmapTreatment,
alaServiceMgrPortProfileRowStatus,
alaServiceMgrPortProfileMvrpTreatment,
alaServiceMgrPortProfileCiscoPduTreatment,
alaServiceMgrPortProfileCiscoVlanTreatment,
alaServiceMgrPortProfileCiscoUplinkTreatment
}
STATUS current
DESCRIPTION
"Collection of objects for management of Service Manager Port Profiles."
::= { alcatelIND1ServiceMgrMIBGroups 1 }
alaServiceMgrPortGroup OBJECT-GROUP
OBJECTS
{
alaServiceMgrPortMode,
alaServiceMgrPortEncapType, -- deprecated
alaServiceMgrPortPortProfileID,
alaServiceMgrPortRowStatus,
alaServiceMgrPortLinkStatus,
alaServiceMgrPortSapType,
alaServiceMgrPortSapCount,
alaServiceMgrPortVlanXlation,
alaServiceMgrPortDescription
}
STATUS current
DESCRIPTION
"Collection of objects for management of Service Manager Access Port."
::= { alcatelIND1ServiceMgrMIBGroups 2 }
alaSapExtraInfoGroup OBJECT-GROUP
OBJECTS
{
alaSapInfoTrusted,
alaSapInfoPriority
}
STATUS obsolete
DESCRIPTION
"Collection of objects for management of Sap extra info."
::= { alcatelIND1ServiceMgrMIBGroups 3 }
alaIgmpServiceGroup OBJECT-GROUP
OBJECTS
{
alaIgmpServiceStatus,
alaIgmpServiceQuerying,
alaIgmpServiceSpoofing,
alaIgmpServiceZapping,
alaIgmpServiceVersion,
alaIgmpServiceRobustness,
alaIgmpServiceQueryInterval,
alaIgmpServiceQueryResponseInterval,
alaIgmpServiceLastMemberQueryInterval,
alaIgmpServiceRouterTimeout,
alaIgmpServiceSourceTimeout,
alaIgmpServiceProxying,
alaIgmpServiceUnsolicitedReportInterval,
alaIgmpServiceQuerierForwarding,
alaIgmpServiceMaxGroupLimit,
alaIgmpServiceMaxGroupExceedAction
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp object."
::= { alcatelIND1ServiceMgrMIBGroups 4 }
alaIgmpMemberServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpMemberServiceSapMode,
alaIgmpMemberServiceSapCount,
alaIgmpMemberServiceSapTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp member sap object."
::= { alcatelIND1ServiceMgrMIBGroups 5 }
alaIgmpMemberServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpMemberServiceSdpBindMode,
alaIgmpMemberServiceSdpBindCount,
alaIgmpMemberServiceSdpBindTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp member sdp binding object."
::= { alcatelIND1ServiceMgrMIBGroups 6 }
alaIgmpStaticMemberServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpStaticMemberServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp static member sap object."
::= { alcatelIND1ServiceMgrMIBGroups 7 }
alaIgmpStaticMemberServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpStaticMemberServiceSdpBindRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp static member sdp binding object."
::= { alcatelIND1ServiceMgrMIBGroups 8 }
alaIgmpNeighborServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpNeighborServiceSapCount,
alaIgmpNeighborServiceSapTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp sap neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 9 }
alaIgmpNeighborServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpNeighborServiceSdpBindCount,
alaIgmpNeighborServiceSdpBindTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp SdpBind neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 10 }
alaIgmpStaticNeighborServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpStaticNeighborServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp sap static neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 11 }
alaIgmpStaticNeighborServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpStaticNeighborServiceSdpBindRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service igmp SdpBind static neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 12 }
alaIgmpQuerierServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpQuerierServiceSapCount,
alaIgmpQuerierServiceSapTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service sap igmp querier object."
::= { alcatelIND1ServiceMgrMIBGroups 13 }
alaIgmpQuerierServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpQuerierServiceSdpBindCount,
alaIgmpQuerierServiceSdpBindTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service SdpBind igmp querier object."
::= { alcatelIND1ServiceMgrMIBGroups 14 }
alaIgmpStaticQuerierServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpStaticQuerierServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service sap igmp static querier object."
::= { alcatelIND1ServiceMgrMIBGroups 15 }
alaIgmpStaticQuerierServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpStaticQuerierServiceSdpBindRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service SdpBind igmp static querier object."
::= { alcatelIND1ServiceMgrMIBGroups 16 }
alaIgmpServiceSourceGroup OBJECT-GROUP
OBJECTS
{
alaIgmpServiceSourceLocale,
alaIgmpServiceSourcePortId,
alaIgmpServiceSourceEncapValue,
alaIgmpServiceSourceSdpId,
alaIgmpServiceSourceVcId,
alaIgmpServiceSourceType
}
STATUS current
DESCRIPTION
"Collection of objects for management of igmp service source object."
::= { alcatelIND1ServiceMgrMIBGroups 17 }
alaIgmpServiceSapForwardGroup OBJECT-GROUP
OBJECTS
{
alaIgmpServiceSapForwardLocale,
alaIgmpServiceSapForwardPortId,
alaIgmpServiceSapForwardEncapValue,
alaIgmpServiceSapForwardSdpId,
alaIgmpServiceSapForwardVcId,
alaIgmpServiceSapForwardType,
alaIgmpServiceSapForwardNextType
}
STATUS current
DESCRIPTION
"Collection of objects for management of igmp service sap forward object."
::= { alcatelIND1ServiceMgrMIBGroups 18 }
alaIgmpServiceSdpBindForwardGroup OBJECT-GROUP
OBJECTS
{
alaIgmpServiceSdpBindForwardLocale,
alaIgmpServiceSdpBindForwardPortId,
alaIgmpServiceSdpBindForwardEncapValue,
alaIgmpServiceSdpBindForwardSdpId,
alaIgmpServiceSdpBindForwardVcId,
alaIgmpServiceSdpBindForwardType,
alaIgmpServiceSdpBindForwardNextType
}
STATUS current
DESCRIPTION
"Collection of objects for management of igmp service SdpBind forward object."
::= { alcatelIND1ServiceMgrMIBGroups 19 }
alaIgmpServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaIgmpServiceSapMaxGroupLimit,
alaIgmpServiceSapMaxGroupExceedAction,
alaIgmpServiceSapCurrentGroupCount
}
STATUS current
DESCRIPTION
"Collection of objects for management of igmp service sap object."
::= { alcatelIND1ServiceMgrMIBGroups 20 }
alaIgmpServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaIgmpServiceSdpBindMaxGroupLimit,
alaIgmpServiceSdpBindMaxGroupExceedAction,
alaIgmpServiceSdpBindCurrentGroupCount
}
STATUS current
DESCRIPTION
"Collection of objects for management of igmp service SdpBind object."
::= { alcatelIND1ServiceMgrMIBGroups 21 }
alaMldServiceGroup OBJECT-GROUP
OBJECTS
{
alaMldServiceStatus,
alaMldServiceQuerying,
alaMldServiceSpoofing,
alaMldServiceZapping,
alaMldServiceVersion,
alaMldServiceRobustness,
alaMldServiceQueryInterval,
alaMldServiceQueryResponseInterval,
alaMldServiceLastMemberQueryInterval,
alaMldServiceRouterTimeout,
alaMldServiceSourceTimeout,
alaMldServiceProxying,
alaMldServiceUnsolicitedReportInterval,
alaMldServiceQuerierForwarding,
alaMldServiceMaxGroupLimit,
alaMldServiceMaxGroupExceedAction
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD object."
::= { alcatelIND1ServiceMgrMIBGroups 22 }
alaMldMemberServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldMemberServiceSapMode,
alaMldMemberServiceSapCount,
alaMldMemberServiceSapTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD member sap object."
::= { alcatelIND1ServiceMgrMIBGroups 23 }
alaMldMemberServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldMemberServiceSdpBindMode,
alaMldMemberServiceSdpBindCount,
alaMldMemberServiceSdpBindTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD member sdp binding object."
::= { alcatelIND1ServiceMgrMIBGroups 24 }
alaMldStaticMemberServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldStaticMemberServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD static member sap object."
::= { alcatelIND1ServiceMgrMIBGroups 25 }
alaMldStaticMemberServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldStaticMemberServiceSdpBindRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD static member sdp binding object."
::= { alcatelIND1ServiceMgrMIBGroups 26 }
alaMldNeighborServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldNeighborServiceSapCount,
alaMldNeighborServiceSapTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD sap neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 27 }
alaMldNeighborServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldNeighborServiceSdpBindCount,
alaMldNeighborServiceSdpBindTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD SdpBind neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 28 }
alaMldStaticNeighborServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldStaticNeighborServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD sap static neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 29 }
alaMldStaticNeighborServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldStaticNeighborServiceSdpBindRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service MLD SdpBind static neighbor object."
::= { alcatelIND1ServiceMgrMIBGroups 30 }
alaMldQuerierServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldQuerierServiceSapCount,
alaMldQuerierServiceSapTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service sap MLD querier object."
::= { alcatelIND1ServiceMgrMIBGroups 31 }
alaMldQuerierServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldQuerierServiceSdpBindCount,
alaMldQuerierServiceSdpBindTimeout
}
STATUS current
DESCRIPTION
"Collection of objects for management of service SdpBind MLD querier object."
::= { alcatelIND1ServiceMgrMIBGroups 32 }
alaMldStaticQuerierServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldStaticQuerierServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service sap MLD static querier object."
::= { alcatelIND1ServiceMgrMIBGroups 33 }
alaMldStaticQuerierServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldStaticQuerierServiceSdpBindRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of service SdpBind MLD static querier object."
::= { alcatelIND1ServiceMgrMIBGroups 34 }
alaMldServiceSourceGroup OBJECT-GROUP
OBJECTS
{
alaMldServiceSourceLocale,
alaMldServiceSourcePortId,
alaMldServiceSourceEncapValue,
alaMldServiceSourceSdpId,
alaMldServiceSourceVcId,
alaMldServiceSourceType
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service source object."
::= { alcatelIND1ServiceMgrMIBGroups 35 }
alaMldServiceSapForwardGroup OBJECT-GROUP
OBJECTS
{
alaMldServiceSapForwardLocale,
alaMldServiceSapForwardPortId,
alaMldServiceSapForwardEncapValue,
alaMldServiceSapForwardSdpId,
alaMldServiceSapForwardVcId,
alaMldServiceSapForwardType,
alaMldServiceSapForwardNextType
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service sap forward object."
::= { alcatelIND1ServiceMgrMIBGroups 36 }
alaMldServiceSdpBindForwardGroup OBJECT-GROUP
OBJECTS
{
alaMldServiceSdpBindForwardLocale,
alaMldServiceSdpBindForwardPortId,
alaMldServiceSdpBindForwardEncapValue,
alaMldServiceSdpBindForwardSdpId,
alaMldServiceSdpBindForwardVcId,
alaMldServiceSdpBindForwardType,
alaMldServiceSdpBindForwardNextType
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service SdpBind forward object."
::= { alcatelIND1ServiceMgrMIBGroups 37 }
alaMldServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaMldServiceSapMaxGroupLimit,
alaMldServiceSapMaxGroupExceedAction,
alaMldServiceSapCurrentGroupCount
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service sap object."
::= { alcatelIND1ServiceMgrMIBGroups 38 }
alaMldServiceSdpBindGroup OBJECT-GROUP
OBJECTS
{
alaMldServiceSdpBindMaxGroupLimit,
alaMldServiceSdpBindMaxGroupExceedAction,
alaMldServiceSdpBindCurrentGroupCount
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service SdpBind object."
::= { alcatelIND1ServiceMgrMIBGroups 39 }
alaVRtrExtendedLdpGeneralGroup OBJECT-GROUP
OBJECTS
{
alaVRtrLdpGenGracefulRestartSupport,
alaVRtrLdpGenGRReconnectTime,
alaVRtrLdpGenGRFwdStateHoldTime,
alaVRtrLdpGenvRtrID
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service SdpBind object."
::= { alcatelIND1ServiceMgrMIBGroups 40 }
alaVRtrLdpExtendedSessionGroup OBJECT-GROUP
OBJECTS
{
alaVRtrLdpSessRestartInProgress,
alaVRtrLdpSessFtReconTimeAdvertised,
alaVRtrLdpSessFtRecoveryTimeAdvertised,
alaVRtrLdpSessvRtrID
}
STATUS current
DESCRIPTION
"Collection of objects for management of MLD service SdpBind object."
::= { alcatelIND1ServiceMgrMIBGroups 41 }
alaSvcBaseInfoEntryGroup OBJECT-GROUP
OBJECTS
{
alaSvcId,
alaSvcRowStatus,
alaSvcType,
alaSvcDescription,
alaSvcMtu,
alaSvcAdminStatus,
alaSvcOperStatus,
alaSvcNumSaps,
alaSvcNumSdps,
alaSvcLastMgmtChange,
alaSvcLastStatusChange,
alaSvcDefMeshVcId,
alaSvcVFI,
alaSvcMcIndex,
alaSvcAllocationType,
alaSvcStatsAdminStatus,
alaSvcRemoteFlushStatus,
alaSvcIsid,
alaSvcBVlan,
alaSvcMulticastMode,
alaSvcIngressPacketCount,
alaSvcIngressByteCount,
alaSvcEgressPacketCount,
alaSvcEgressByteCount,
alaSvcClearCounters,
alaSvcSapVlanXlation,
alaSvcVnid,
alaSvcRemoveIngressTag,
alaSvcL3VpnIfIndex,
alaSvcL3VpnIfName,
alaSvcL3VpnVrfName,
alaSvcL3VpnMtu
}
STATUS current
DESCRIPTION
"Collection of Service Manager management objects."
::= { alcatelIND1ServiceMgrMIBGroups 42 }
alaSapBaseInfoEntryGroup OBJECT-GROUP
OBJECTS
{
alaSapPortId,
alaSapEncapValue,
alaSapRowStatus,
alaSapType,
alaSapDescription,
alaSapAdminStatus,
alaSapOperStatus,
alaSapLastMgmtChange,
alaSapLastStatusChange,
alaSapOperFlags,
alaSapTrusted,
alaSapPriority,
alaSapSvcId,
alaSapSvcVFI,
alaSapVirtualPort,
alaSapAllocationType,
alaSapStatsAdminStatus,
alaSapIngressPacketCount,
alaSapIngressByteCount,
alaSapEgressPacketCount,
alaSapEgressByteCount,
alaSapClearCounters
}
STATUS current
DESCRIPTION
"Collection of SAP management objects."
::= { alcatelIND1ServiceMgrMIBGroups 43 }
alaSdpInfoTableGroup OBJECT-GROUP
OBJECTS
{
alaSdpRowStatus,
alaSdpSvcType,
alaSdpDelivery,
alaSdpFarEndIpAddress,
alaSdpDescription,
alaSdpLabelSignaling,
alaSdpAdminStatus,
alaSdpOperStatus,
alaSdpAdminPathMtu,
alaSdpOperPathMtu,
alaSdpLastMgmtChange,
alaSdpLdpEnabled,
alaSdpVlanVcEtype,
alaSdpAdvertisedVllMtuOverride,
alaSdpOperFlags,
alaSdpLastStatusChange,
alaSdpNetworkPort,
alaSdpBVlan,
alaSdpSystemId,
alaSdpSystemName,
alaSdpSpSourceId,
alaSdpAllocationType,
alaSdpDynamicType,
alaSdpBindCount,
alaSdpIsid,
alaSdpMcastPortList,
alaSdpCreationOrigin,
alaSdpAdminTTL
}
STATUS current
DESCRIPTION
"Collection of SDP management objects."
::= { alcatelIND1ServiceMgrMIBGroups 44 }
alaSdpBindTableGroup OBJECT-GROUP
OBJECTS
{
alaSdpBindId,
alaSdpBindRowStatus,
alaSdpBindSvcType,
alaSdpBindAdminIngressLabel,
alaSdpBindAdminEgressLabel,
alaSdpBindOperIngressLabel,
alaSdpBindOperEgressLabel,
alaSdpBindAdminStatus,
alaSdpBindOperStatus,
alaSdpBindLastMgmtChange,
alaSdpBindType,
alaSdpBindOperFlags,
alaSdpBindLastStatusChange,
alaSdpBindControlWordBit,
alaSdpBindOperControlWord,
alaSdpBindNetworkPort,
alaSdpBindVirtualPort,
alaSdpBindIsid,
alaSdpBindBVlan,
alaSdpBindSystemId,
alaSdpBindSystemName,
alaSdpBindAllocationType,
alaSdpBindIngressPacketCount,
alaSdpBindIngressByteCount,
alaSdpBindEgressPacketCount,
alaSdpBindEgressByteCount,
alaSdpBindCreationOrigin,
alaSdpBindFarEndIpAddress,
alaSdpBindVnid,
alaSdpBindDescription,
alaSdpBindStatsAdminStatus
}
STATUS current
DESCRIPTION
"Collection of SDP-Bind management objects."
::= { alcatelIND1ServiceMgrMIBGroups 45 }
alaSmgrNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
smgrGeneralError,
smgrSapError,
smgrSdpBindError,
smgrSdpError,
smgrServiceError,
smgrStatusChange,
smgrServiceStatusChange,
smgrSapStatusChange,
smgrSdpStatusChange,
smgrSdpBindStatusChange,
smgrVxlanSdpBindStatusChange
}
STATUS current
DESCRIPTION
" Collection of Service Mgr errors."
::= { alcatelIND1ServiceMgrMIBGroups 46 }
alaSmgrHwNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
smgrSapHwError,
smgrSdpBindHwError,
smgrSdpHwError,
smgrServiceHwError
}
STATUS current
DESCRIPTION
" Collection of Service Mgr Hw errors."
::= { alcatelIND1ServiceMgrMIBGroups 47 }
alaSvcMgrSysTableGroup OBJECT-GROUP
OBJECTS
{
alaSvcMgrSysId,
alaSvcMgrSysName,
alaSvcMgrSdpTrapAdminState,
alaSvcMgrSvcTrapAdminState,
alaSvcMgrSapTrapAdminState,
alaSvcMgrSdpBindTrapAdminState,
alaSvcMgrMaxTrapPerMinute,
alaSvcMgrSysLastMgmtChange,
alaSvcMgrSysLastStatusChange,
alaSvcMgrStatsAdminState,
alaSvcMgrVxlanDestUdpPort,
alaSvcMgrVxlanVrfName
}
STATUS current
DESCRIPTION
"Collection of Service Mgr System management objects."
::= { alcatelIND1ServiceMgrMIBGroups 48 }
alaSvcMgrEndPointGroup OBJECT-GROUP
OBJECTS
{
alaRfpSpbLocalEndPointCcmInterval,
alaRfpSpbLocalEndPointAdminStatus,
alaRfpSpbLocalEndPointLevel,
alaRfpSpbLocalEndPointCBVlan,
alaRfpSpbLocalEndPointMaintDomain,
alaRfpSpbLocalEndPointMaintAssociation,
alaRfpSpbLocalEndPointRowStatus,
alaRfpSpbRemoteEndPointStatus,
alaRfpSpbRemoteEndPointSystemName,
alaRfpSpbRemoteEndPointISID,
alaRfpSpbRemoteEndPointBVlan,
alaRfpSpbRemoteEndPointRowStatus
}
STATUS current
DESCRIPTION
"Collection of Service Mgr System management objects."
::= { alcatelIND1ServiceMgrMIBGroups 49 }
END