mibs/nokia/aos7/ALCATEL-IND1-SYSTEM-MIB
ALCATEL-IND1-SYSTEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress,
Integer32, Unsigned32, Counter64, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus
FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
Ipv6Address
FROM IPV6-TC
hardentIND1System
FROM ALCATEL-IND1-BASE
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
VirtualOperChassisId, virtualChassisOperChasId
FROM ALCATEL-IND1-VIRTUAL-CHASSIS-MIB;
alcatelIND1SystemMIB MODULE-IDENTITY
LAST-UPDATED "200709040000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201101230000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= {hardentIND1System 1 }
alcatelIND1SystemMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For BOP Proprietary System
Subsystem Managed Objects."
::= { alcatelIND1SystemMIB 1 }
alcatelIND1SystemMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Conformance Information."
::= { alcatelIND1SystemMIB 2 }
alcatelIND1SystemMIBTrapObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Trap Objects."
::= { alcatelIND1SystemMIB 3 }
alcatelIND1SystemMIBTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Trap Information."
::= { alcatelIND1SystemMIB 4 }
alcatelIND1SystemMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Units Of Conformance."
::= { alcatelIND1SystemMIBConformance 1 }
alcatelIND1SystemMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Compliance Statements."
::= { alcatelIND1SystemMIBConformance 2 }
-- textual conventions
SystemFileType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to identify file types"
SYNTAX INTEGER {
file(1),
directory(2),
undefined(3),
tarArchive(4)
}
SwitchLoggingIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to identify switch logging outputs"
SYNTAX INTEGER { console(1),
flash(2),
socket(3),
ipaddr(4)
}
AppIdIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to index into tables arranged
by Application ID's."
SYNTAX Integer32 (0..254) -- 255 possible application id's
Enable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"an enumerated value used to indicate whether an entity is
enabled(1), or disabled(2)"
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
FileSystemIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"an enumerated value which provides an indication of the
file system. The value is a small positive integer indicating
the type of the file system"
SYNTAX INTEGER {
flash(1), -- /flash
uflash(2) -- /uflash (USB Flash drive)
}
SeverityLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"an enumerated value which provides an indication of the
severity level used for logging and debug purposes. The value is
a small integer."
SYNTAX INTEGER
{
severityLevelOff (0), -- logging turned off
severityLevelAlarm(1), -- about to crash and reboot
severityLevelError(2), -- functionality is reduced
severityLevelAlert(3), -- a violation has occurred
severityLevelWarn (4), -- unexpected, non critical event
severityLevelInfo (5), -- any other msg that is not a dbg msg
severityLevelDbg1 (6), -- normal event debug message
severityLevelDbg2 (7), -- debug specific message
severityLevelDbg3 (8) -- maximum verbosity dbg specific msg
}
SysLogFacilityId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
""
SYNTAX INTEGER
{
uucp(0),
user(1),
system(2),
syslog(3),
secAuth2(4),
secAuth1(5),
ntp(6),
netNews(7),
mail(8),
lptr(9),
logAudit(10),
logAlert(11),
local7(12),
local6(13),
local5(14),
local4(15),
local3(16),
local2(17),
local1(18),
local0(19),
kernel(20),
ftp(21),
clock2(22),
clock1(23)
}
CommandPercentComplete ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An indication of percent complete for a command."
SYNTAX Integer32 (0..100)
VrfId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Switch Log Vrf ID"
SYNTAX Integer32 (1..64)
AgeLimit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Time Limit for switch log hash table entries"
SYNTAX Integer32 (1..64)
-- groups within the system mib
systemMicrocode OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 1 }
systemBootParams OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 2 }
systemHardware OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 3 }
systemFileSystem OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 4 }
systemServices OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 5 }
systemSwitchLogging OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 6 }
systemDNS OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 7 }
systemBlueToothServices OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 8 }
systemFips OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 9 }
systemVcHardware OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 10 }
-- systemMicrocode group. This group contains the CMM specific
-- microcode information.
systemMicrocodePackageTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemMicrocodePackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the microcode package table"
::= {systemMicrocode 1}
systemMicrocodePackageEntry OBJECT-TYPE
SYNTAX SystemMicrocodePackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the microcode package table"
INDEX {systemMicrocodePackageDirectoryIndex, systemMicrocodePackageDirectory,
systemMicrocodePackageIndex}
::= {systemMicrocodePackageTable 1}
SystemMicrocodePackageEntry ::= SEQUENCE {
systemMicrocodePackageDirectoryIndex Unsigned32,
systemMicrocodePackageDirectory SnmpAdminString,
systemMicrocodePackageIndex Unsigned32,
systemMicrocodePackageVersion SnmpAdminString,
systemMicrocodePackageName SnmpAdminString,
systemMicrocodePackageDescription SnmpAdminString,
systemMicrocodePackageStatus INTEGER,
systemMicrocodePackageSize Unsigned32
}
systemMicrocodePackageDirectoryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The package index for directories. Values 1-4 are pre-defined
as: loaded(1), certified(2), working(3), issu(4). Values 5+
are user working directories in /flash assigned by the system.
Values 5+ remain associated with a directory until reboot,
takeover, the directory no longer contains valid images or
the directory no longer exists."
::= {systemMicrocodePackageEntry 1}
systemMicrocodePackageDirectory OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..108))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The directory name under flash where the microcode package is found.
Directories with names longer than 108 characters will be skipped."
::= {systemMicrocodePackageEntry 2}
systemMicrocodePackageIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the package sub table in the microcode table"
::= {systemMicrocodePackageEntry 3}
systemMicrocodePackageVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the microcode package (Fos.img, Fbase.img, etc.)"
::= {systemMicrocodePackageEntry 4}
systemMicrocodePackageName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the microcode package"
DEFVAL { "" }
::= {systemMicrocodePackageEntry 5}
systemMicrocodePackageDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the microcode package"
DEFVAL { "" }
::= {systemMicrocodePackageEntry 6}
systemMicrocodePackageStatus OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
ok(2),
inuse(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the microcode package"
DEFVAL { undefined }
::= {systemMicrocodePackageEntry 7}
systemMicrocodePackageSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the microcode package"
DEFVAL { 0 }
::= {systemMicrocodePackageEntry 8}
systemMicrocodeLoadedTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemMicrocodeLoadedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the microcode package table"
::= {systemMicrocode 2}
systemMicrocodeLoadedEntry OBJECT-TYPE
SYNTAX SystemMicrocodeLoadedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the microcode package table"
INDEX {systemMicrocodeLoadedIndex}
::= {systemMicrocodeLoadedTable 1}
SystemMicrocodeLoadedEntry ::= SEQUENCE {
systemMicrocodeLoadedIndex Unsigned32,
systemMicrocodeLoadedDirectory SnmpAdminString,
systemMicrocodeLoadedVersion SnmpAdminString,
systemMicrocodeLoadedName SnmpAdminString,
systemMicrocodeLoadedDescription SnmpAdminString,
systemMicrocodeLoadedSize Unsigned32
}
systemMicrocodeLoadedIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the loaded package in microcode table"
::= {systemMicrocodeLoadedEntry 1}
systemMicrocodeLoadedDirectory OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..108))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The directory name under flash where the microcode package is found.
Directories with names longer than 108 characters will be skipped."
::= {systemMicrocodeLoadedEntry 2}
systemMicrocodeLoadedVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the microcode package (Fos.img, Fbase.img, etc.)"
::= {systemMicrocodeLoadedEntry 3}
systemMicrocodeLoadedName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the microcode package"
DEFVAL { "" }
::= {systemMicrocodeLoadedEntry 4}
systemMicrocodeLoadedDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the microcode package"
DEFVAL { "" }
::= {systemMicrocodeLoadedEntry 5}
systemMicrocodeLoadedSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the microcode package"
DEFVAL { 0 }
::= {systemMicrocodeLoadedEntry 6}
-- systemBootParams group. This group contains the CMM specific
-- boot parameter information.
systemBootNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this object is the base IP address of the EMP for this CMM"
::= { systemBootParams 1 }
systemBootNetworkGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this object is the gateway of the EMP for this CMM"
::= { systemBootParams 2 }
systemBootNetworkNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Netmask of the EMP that is used when this
CMM boots."
::={ systemBootParams 3 }
-- systemHardware group. This group contains hardware information
-- regarding this CMM.
systemHardwareFlashMfg OBJECT-TYPE
SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the manufacturer of the Flash memory
used on this product. toshiba(7) is for hawk only. The reason 7 is used
is because 5 is already used for micron and 6 is for kingston.
toshiba, sandisk, and sst are compact flashes for the hawk only."
::= { systemHardware 1}
systemHardwareFlashSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of the flash memory available
on this CMM. It is the total flash hardware memory and does
not indicate how much of the memory is free, used, etc."
::= { systemHardware 2}
systemHardwareMemoryMfg OBJECT-TYPE
SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), agilent(8), dataram(10), interward(11), notreadable(12)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the manufacturer of the RAM memory
used on this CMM."
::= { systemHardware 3}
systemHardwareMemorySize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of the RAM memory available on
this CMM. It is the total RAM hardware memory and does not
indicate how much of the memory is free, used, etc."
::= { systemHardware 4}
systemHardwareNVRAMBatteryLow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the whether the NVRAM battery is low.
true(1), false(2)"
::= { systemHardware 5}
systemHardwareBootCpuType OBJECT-TYPE
SYNTAX INTEGER {other(1), sparc380(2), sparcV9(3), ppc(4), ppc8540(5), ppc8572(6), arm(7)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the manufacturer and model number of the CPU. Currently,
only two types of processors are enumerated."
::={ systemHardware 6 }
systemHardwareJumperInterruptBoot OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Interrupt Boot Jumper on this
CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 7}
systemHardwareJumperForceUartDefaults OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Force Uart Defaults Jumper on this
CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 8}
systemHardwareJumperRunExtendedMemoryDiagnostics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Run Extended Memory
Diagnostics Jumper on this CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 9}
systemHardwareJumperSpare OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Spare Jumper on this
CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 10}
systemHardwareFpgaVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemHardwareFpgaVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the FPGA version for each FPGA on this CMM"
::= {systemHardware 11}
systemHardwareFpgaVersionEntry OBJECT-TYPE
SYNTAX SystemHardwareFpgaVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the systemHardwareFpgaVersionTable"
INDEX {systemHardwareFpgaVersionIndex}
::= {systemHardwareFpgaVersionTable 1}
SystemHardwareFpgaVersionEntry ::= SEQUENCE {
systemHardwareFpgaVersionIndex Integer32,
systemHardwareFpgaVersion Unsigned32
}
systemHardwareFpgaVersionIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the index to one of the FPGA versions on this CMM"
::={systemHardwareFpgaVersionEntry 1}
systemHardwareFpgaVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the major version of one of the FPGA devices on this CMM.
refer to the systemHardwareMinorFpgaVersion for the minor number."
::={systemHardwareFpgaVersionEntry 2}
systemHardwareBootRomVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the boot rom version"
DEFVAL { "" }
::={ systemHardware 12 }
systemHardwareBackupMiniBootVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the backup miniboot version."
DEFVAL { "" }
::={ systemHardware 13 }
systemHardwareDefaultMiniBootVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the default miniboot version."
DEFVAL { "" }
::={ systemHardware 14 }
systemHardwareMinorFpgaVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the minor FPGA version. Refer to the
systemHardwareFpgaVersion for the major FPGA version number."
DEFVAL { "" }
::={ systemHardware 15 }
systemHardwareCpldVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the CPLD version."
DEFVAL { "" }
::={ systemHardware 16 }
systemHardwareUbootVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the Uboot version."
DEFVAL { "" }
::={ systemHardware 17 }
systemHardwareProdRegId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the product ID register"
DEFVAL { "" }
::={ systemHardware 18 }
systemHardwareRevisionRegister OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the hardware revision register"
DEFVAL { "" }
::={ systemHardware 19 }
systemHardwareXfpId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the XFP ID"
DEFVAL { "" }
::={ systemHardware 20 }
systemHardwareUbootMinibootVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the Uboot-miniboot version."
DEFVAL { "" }
::={ systemHardware 21 }
-- systemServices group. This group contains the objects used by the
-- System Services applications.
systemServicesDate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current System Date in the
following format: MM/DD/YYYY"
::= { systemServices 1 }
systemServicesTime OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current System Time in the
following format: HH:MM:SS"
::= { systemServices 2 }
systemServicesTimezone OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current Hour Offset from UTC
in the following format: -13:00 to +12:00
OR
a well known timezone (PST,CST,etc.)"
::= { systemServices 3 }
systemServicesTimezoneStartWeek OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first, second, third, fourth, fifth, last = 1,2,3,4,5,6"
DEFVAL { 0 }
::= { systemServices 4 }
systemServicesTimezoneStartDay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sunday, Monday, Tues... = 1,2,3,4,5,6,7"
DEFVAL { 0 }
::= { systemServices 5 }
systemServicesTimezoneStartMonth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"January, February, march... = 1,2,3,4,5,67,8,9,10,11,12"
DEFVAL { 0 }
::= { systemServices 6 }
systemServicesTimezoneStartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"2:00, 3:00, 4:00... = 200, 300, 400, etc."
DEFVAL { 0 }
::= { systemServices 7 }
systemServicesTimezoneOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"60 minutes = 60"
DEFVAL { 0 }
::= { systemServices 8 }
systemServicesTimezoneEndWeek OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first, second, third, fourth, fifth, last = 1,2,3,4,5,6"
DEFVAL { 0 }
::= { systemServices 9 }
systemServicesTimezoneEndDay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sunday, Monday, Tues... = 1,2,3,4,5,6,7"
DEFVAL { 0 }
::= { systemServices 10 }
systemServicesTimezoneEndMonth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12"
DEFVAL { 0 }
::= { systemServices 11 }
systemServicesTimezoneEndTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"2:00, 3:00, 4:00... = 200, 300, 400, etc."
DEFVAL { 0 }
::= { systemServices 12 }
systemServicesEnableDST OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables and disables the DST."
DEFVAL { disabled }
::= { systemServices 13 }
systemServicesWorkingDirectory OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current file system working directory
for this CMM. For example, /flash/certified"
DEFVAL {"/flash"}
::= { systemServices 14 }
systemServicesArg1 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 1st argument for system services action routines"
DEFVAL {""}
::= { systemServices 15 }
systemServicesArg2 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 2nd argument for system services action routines"
DEFVAL {""}
::= { systemServices 16 }
systemServicesArg3 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 3rd argument for system services action routines"
DEFVAL {""}
::= { systemServices 17 }
systemServicesArg4 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 4th argument for system services action routines"
DEFVAL {""}
::= { systemServices 18 }
systemServicesArg5 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 5th argument for system services action routines"
DEFVAL {""}
::= { systemServices 19 }
systemServicesArg6 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 6th argument for system services action routines"
DEFVAL {""}
::= { systemServices 20 }
systemServicesArg7 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 7th argument for system services action routines"
DEFVAL {""}
::= { systemServices 21 }
systemServicesArg8 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 8th argument for system services action routines"
DEFVAL {""}
::= { systemServices 22 }
systemServicesArg9 OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 9th argument for system services action routines"
DEFVAL {""}
::= { systemServices 23 }
systemServicesAction OBJECT-TYPE
SYNTAX INTEGER{
noaction(0),
mkdir(1),
rmdir(2),
mv(3),
rm(4),
rmr(5),
cp(6),
cpr(7),
chmodpw(8),
chmodmw(9),
fsck(10),
ftp(11),
rz(12),
vi(13),
telnet(14),
install(15),
ed(16),
more(17),
newfs(18),
dshell(19),
view(20),
modbootparams(21),
filedir(22),
ssh(23),
sftp(24),
debugPmdNi(25),
bootrom(26),
defaultminiboot(27),
backupminiboot(28),
fpgacmm(29),
ubootcmm(30),
ubootni(31),
scp(32),
aclman(33),
ubootMinibootAllSlots(34),
miniboot(35),
upgradeLicence(36),
restoreLicence(37),
updateDSineXtroller(38),
ftp6(39),
telnet6(40),
ssh6(41),
sftp6(42),
mount(43),
unmount(44),
backup(45),
restore(46),
tftp(47),
fscollect(48),
fpgani(49)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies which of the above Actions is to be
performed by the System Services Application. Most Actions
require one or more parameters be set before the Action is
executed. systemServicesAction - 26 for bootrom, 27 for default miniboot,
and 28 for backup miniboot use systemServicesArg1 for name of the file
scp- the first 2 arguments are going to be used. Set arg 1 with the source
and the arg 2 with the destination file(s).
E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt
For mount and umount, systemServicesArg1 specifies the
mount point (such as /uflash).
For newfs, systemServicesArg1 contains the name of the
file-system (/uflash or /flash) which will be created. On
/uflash, a FAT16 file system is created with long name naming conventions.
For fsck, systemServicesArg1 contains the name of the
file-system (/uflash or /flash) which will be checked and
systemServicesArg2 will contain the string repair or
no-repair depending on if autocorrection is requested.
To see all file systems currently mounted, refer to the
systemFileSystemTable.
For backup and restore, systemServicesArg1 contains the
archive name and systemServicesArg2 through Arg9 contains the
directories and/or files to be archived/extracted.
For newfs, fsck, backup and restore, the
systemServicesActionPercentComplete variable can be
inspected to see a progress indication."
::= { systemServices 24 }
systemServicesResultCode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the result of a system services application"
::= { systemServices 25 }
systemServicesResultString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the string result of a system services application"
::= { systemServices 26 }
systemServicesKtraceEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"enables/disables the Ktrace facility"
DEFVAL { enabled }
::= { systemServices 27 }
systemServicesSystraceEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"enables/disables the Systrace facility"
DEFVAL { enabled }
::= { systemServices 28 }
systemServicesTtyLines OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the number of tty lines for a console screen"
DEFVAL { 24 }
::= { systemServices 29 }
systemServicesTtyColumns OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the number of tty columns for a console screen"
DEFVAL { 80 }
::= { systemServices 30 }
systemServicesMemMonitorEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disables/enables the kernel Memory Monitor feature"
DEFVAL { enabled }
::= { systemServices 31 }
systemServicesKtraceLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesKtraceLevelEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"the table of Ktrace severity level settings"
::= { systemServices 32}
systemServicesKtraceLevelEntry OBJECT-TYPE
SYNTAX SystemServicesKtraceLevelEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A row in the system services ktrace level table. There
is one entry for each possible Application ID"
INDEX {systemServicesKtraceLevelAppId}
::= {systemServicesKtraceLevelTable 1}
SystemServicesKtraceLevelEntry ::= SEQUENCE {
systemServicesKtraceLevelAppId AppIdIndex,
systemServicesKtraceLevel SeverityLevel
}
systemServicesKtraceLevelAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"the index into the ktrace level table"
::= {systemServicesKtraceLevelEntry 1 }
systemServicesKtraceLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"the ktrace level for a specific Application ID"
DEFVAL { severityLevelDbg3 }
::= {systemServicesKtraceLevelEntry 2 }
systemServicesSystraceLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesSystraceLevelEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"the table of Systrace severity level settings"
::= { systemServices 33}
systemServicesSystraceLevelEntry OBJECT-TYPE
SYNTAX SystemServicesSystraceLevelEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A row in the system services systrace level table. There
is one entry for each possible Application ID"
INDEX {systemServicesSystraceLevelAppId}
::= {systemServicesSystraceLevelTable 1}
SystemServicesSystraceLevelEntry ::= SEQUENCE {
systemServicesSystraceLevelAppId AppIdIndex,
systemServicesSystraceLevel SeverityLevel
}
systemServicesSystraceLevelAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"the Systrace level for a specific Application ID."
::= {systemServicesSystraceLevelEntry 1 }
systemServicesSystraceLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"the Systrace level for a specific Application ID."
DEFVAL { severityLevelDbg3 }
::= {systemServicesSystraceLevelEntry 2 }
systemUpdateStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides update status for firmware updates"
::= {systemServices 34}
systemUpdateStatusEntry OBJECT-TYPE
SYNTAX SystemUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the update status table."
INDEX { systemUpdateIndex}
::= {systemUpdateStatusTable 1}
SystemUpdateStatusEntry ::= SEQUENCE {
systemUpdateIndex Integer32,
systemUpdateStatus INTEGER,
systemUpdateErrorCode INTEGER
}
systemUpdateIndex OBJECT-TYPE
SYNTAX Integer32(1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the CMM for which status is required."
::= {systemUpdateStatusEntry 1}
systemUpdateStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
doneOk(2),
doneNok(3),
noOp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of a firmware update. In the case of doneNok,
further information can be obtained from systemUpdateErrorCode."
::= {systemUpdateStatusEntry 2}
systemUpdateErrorCode OBJECT-TYPE
SYNTAX INTEGER {
msgSendIpcErr(1),
fXferOPenErr(2),
fXferFtpErr(3),
fXferReadErr(4),
fXferWriteErr(5),
fXferReplyErr(6),
fXferQuitErr(7),
fXferFcloseErr(8),
fileNameErr(9),
rmFileErr(10),
noInstallComp(11),
notSysResource(12),
notSupported(13),
invalidValue(14),
waitMsgMaxTry(15),
installDrvErr(16),
fileNotFound(17),
notPrimary(18),
commandBlocked(19),
noError(20),
invalidNi(21),
niNotPresent(22),
dupSerialNum(23),
upToDate(24),
invalidModType(25),
maxFaiCount(26),
invalidKey(27),
niLocked(28)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error codes for done_nok."
::= {systemUpdateStatusEntry 3}
systemServicesActionPercentComplete OBJECT-TYPE
SYNTAX CommandPercentComplete
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the percent completion of the currently
executing systemServicesAction."
::= { systemServices 35 }
systemServicesCurrentArchivePathName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the archive currently being read
via the systemServicesArchiveTable. This object is the complete
pathname to the archive and must be set prior to reading the
systemServicesArchiveTable."
::= { systemServices 36 }
systemServicesArchiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesArchiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the contents of a backup archive.
This table is used by the restore action command to
display (rather than backup) an archive. The restore
command will populate this table with archive
information read from the archive specified by the
systemServicesAction restore command. This is done as
follows. Set the systemServicesArg1 object to the
archive name to be read. Set the systemServicesArg2
object to the string: display-only. Set the
systemServicesAction object to restore. Then
read this table."
::= { systemServices 37}
systemServicesArchiveEntry OBJECT-TYPE
SYNTAX SystemServicesArchiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system services archive table."
INDEX { systemServicesArchiveIndex }
::= { systemServicesArchiveTable 1 }
SystemServicesArchiveEntry ::= SEQUENCE {
systemServicesArchiveIndex Unsigned32,
systemServicesArchiveName SnmpAdminString,
systemServicesArchiveType SystemFileType,
systemServicesArchiveSize Unsigned32,
systemServicesArchiveAttr INTEGER
}
systemServicesArchiveIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to a specific entry in the backup archive file."
::= {systemServicesArchiveEntry 1}
systemServicesArchiveName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a file in the backup archive file."
DEFVAL { "" }
::= { systemServicesArchiveEntry 2 }
systemServicesArchiveType OBJECT-TYPE
SYNTAX SystemFileType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of a file in the backup archive file."
DEFVAL { undefined }
::= { systemServicesArchiveEntry 3 }
systemServicesArchiveSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of a file in the backup archive file."
DEFVAL { 0 }
::= { systemServicesArchiveEntry 4 }
systemServicesArchiveAttr OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
readOnly(2),
readWrite(3),
writeOnly(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attributes of a file in the backup archive file."
DEFVAL { undefined }
::= { systemServicesArchiveEntry 5 }
systemServicesUsbEnable OBJECT-TYPE
SYNTAX INTEGER {
enableasync(1),
disable(2),
enablesync(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable the USB interface with mode as synchronous / asynchronous"
DEFVAL { disable }
::= { systemServices 38}
systemServicesUsbAutoCopyEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable the USB auto-copy facility"
::= { systemServices 39}
systemServicesUsbMounted OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"determinse if usb is mounted"
::= { systemServices 40}
--systemFileSystem group. This group contains the parameters for
--the multiple File Systems on the platform.
systemFileSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemFileSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"system file system table for this CMM."
::= { systemFileSystem 1}
systemFileSystemEntry OBJECT-TYPE
SYNTAX SystemFileSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system file system table"
INDEX {systemFileSystemIndex}
::= {systemFileSystemTable 1}
SystemFileSystemEntry ::= SEQUENCE {
systemFileSystemIndex FileSystemIndex,
systemFileSystemName SnmpAdminString,
systemFileSystemFreeSpace Unsigned32
}
systemFileSystemIndex OBJECT-TYPE
SYNTAX FileSystemIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to a specific file system."
::= {systemFileSystemEntry 1}
systemFileSystemName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the file system."
DEFVAL { "" }
::= { systemFileSystemEntry 2 }
systemFileSystemFreeSpace OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the free space in octets of this file system"
DEFVAL { 0 }
::= { systemFileSystemEntry 3 }
systemFileSystemDirectoryName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of a file system directory. This object is used in conjunction
with an Action command. The Action command will set this directory
name to the name of a specific directory. Information for all of the
files in that directory will then be read from the file system and
the appropriate values written in the entries in the systemFileSystemFile
table. All this is being done to give snmp access to the file system
files."
DEFVAL { "" }
::= { systemFileSystem 2 }
systemFileSystemDirectoryDateTime OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the date and time (in system format) of the last access to this directory"
DEFVAL { "" }
::= { systemFileSystem 3 }
systemFileSystemFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemFileSystemFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"system file system File table for this CMM. This table is used by
an Action command which will populate it with file information read
from the files in the specified directory."
::= { systemFileSystem 4}
systemFileSystemFileEntry OBJECT-TYPE
SYNTAX SystemFileSystemFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system file system File table"
INDEX { systemFileSystemFileIndex} -- base table index
::= {systemFileSystemFileTable 1}
SystemFileSystemFileEntry ::= SEQUENCE {
systemFileSystemFileIndex Unsigned32,
systemFileSystemFileName SnmpAdminString,
systemFileSystemFileType SystemFileType,
systemFileSystemFileSize Unsigned32,
systemFileSystemFileAttr INTEGER,
systemFileSystemFileDateTime SnmpAdminString
}
systemFileSystemFileIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to a specific file system File."
::= {systemFileSystemFileEntry 1}
systemFileSystemFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a file system File"
DEFVAL { "" }
::= { systemFileSystemFileEntry 2 }
systemFileSystemFileType OBJECT-TYPE
SYNTAX SystemFileType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Type of a file system File"
DEFVAL { undefined }
::= { systemFileSystemFileEntry 3 }
systemFileSystemFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"size of this file"
DEFVAL { 0 }
::= { systemFileSystemFileEntry 4 }
systemFileSystemFileAttr OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
readOnly(2),
readWrite(3),
writeOnly(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"attributes of this file"
DEFVAL { undefined }
::= { systemFileSystemFileEntry 5 }
systemFileSystemFileDateTime OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the modification date and time of a file"
DEFVAL { "" }
::= { systemFileSystemFileEntry 6 }
--systemSwitchLogging group. This group contains the Switch Logging
--configuration data.
systemSwitchLoggingIndex OBJECT-TYPE
SYNTAX SwitchLoggingIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A small positive integer used to identify a switch logging
output"
DEFVAL { flash }
::={ systemSwitchLogging 1 }
systemSwitchLoggingEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging enable/disable"
DEFVAL { enabled }
::={ systemSwitchLogging 2 }
systemSwitchLoggingFlash OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to flash"
DEFVAL { enabled }
::={ systemSwitchLogging 3 }
systemSwitchLoggingSocket OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to a socket"
DEFVAL { disabled }
::={ systemSwitchLogging 4 }
systemSwitchLoggingSocketIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP Address of a remote host that can
be used to send switch logging records to as an option"
::={ systemSwitchLogging 5 }
systemSwitchLoggingConsole OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to the console"
DEFVAL { disabled }
::={ systemSwitchLogging 6 }
systemSwitchLoggingApplicationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging registered applications,one for
each Application ID"
::={ systemSwitchLogging 7}
systemSwitchLoggingLevelEntry OBJECT-TYPE
SYNTAX SystemSwitchLoggingLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system switch logging application table"
INDEX { systemSwitchLoggingApplicationAppId,
systemSwitchLoggingApplicationSubAppId,
systemSwitchLoggingApplicationSubAppVrfLevelIndex }
::={ systemSwitchLoggingApplicationTable 1 }
SystemSwitchLoggingLevelEntry ::= SEQUENCE {
systemSwitchLoggingApplicationAppId AppIdIndex,
systemSwitchLoggingApplicationSubAppId AppIdIndex,
systemSwitchLoggingApplicationSubAppVrfLevelIndex Integer32,
systemSwitchLoggingApplicationAppName SnmpAdminString,
systemSwitchLoggingApplicationSubAppName SnmpAdminString,
systemSwitchLoggingApplicationSubAppLevel SeverityLevel,
systemSwitchLoggingApplicationSubAppVrfLevelString SnmpAdminString
}
systemSwitchLoggingApplicationAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A specific application ID which has a registered application
associated with it. This application ID is used as an index
into the application table."
::={ systemSwitchLoggingLevelEntry 1 }
systemSwitchLoggingApplicationSubAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A specific sub-application ID which belongs to a registered
application associated with it. This sub-application ID is used
as part of the index into the application table."
::={ systemSwitchLoggingLevelEntry 2 }
systemSwitchLoggingApplicationSubAppVrfLevelIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The specific sub-application's VRF severity level. This
severity level is used as part of the index into the
application table."
::={ systemSwitchLoggingLevelEntry 3 }
systemSwitchLoggingApplicationAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application name in an entry in the table"
DEFVAL { "" }
::={ systemSwitchLoggingLevelEntry 4 }
systemSwitchLoggingApplicationSubAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the specific sub-application ID."
DEFVAL { "" }
::={ systemSwitchLoggingLevelEntry 5 }
systemSwitchLoggingApplicationSubAppLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity level of the specific sub-application ID."
DEFVAL { severityLevelOff }
::={ systemSwitchLoggingLevelEntry 6 }
systemSwitchLoggingApplicationSubAppVrfLevelString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string with comma-delimited VRF IDs or ranges of VRF IDs
that belong to this sub-application's VRF severity level."
DEFVAL { "" }
::={ systemSwitchLoggingLevelEntry 7 }
systemSwitchLoggingClear OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable clearing of switch logging entries"
::={ systemSwitchLogging 8 }
systemSwitchLoggingFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set size of swlog logging file"
::={ systemSwitchLogging 9 }
systemSwitchLoggingHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging remote hosts."
::={ systemSwitchLogging 10}
systemSwitchLoggingHostEntry OBJECT-TYPE
SYNTAX SystemSwitchLoggingHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A remote switch logging server entry."
INDEX { systemSwitchLoggingHostIpAddr }
::={ systemSwitchLoggingHostTable 1 }
SystemSwitchLoggingHostEntry ::= SEQUENCE {
systemSwitchLoggingHostIpAddr IpAddress,
systemSwitchLoggingHostPort Integer32,
systemSwitchLoggingHostStatus RowStatus,
systemSwitchLoggingHostUserCommandHost Enable,
systemSwitchLoggingHostVrfName SnmpAdminString
}
systemSwitchLoggingHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of a remote host that can
be used to send switch logging records to."
::={ systemSwitchLoggingHostEntry 1 }
systemSwitchLoggingHostPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of a remote host that can
be used to send switch logging records to."
DEFVAL { 514 }
::={ systemSwitchLoggingHostEntry 2 }
systemSwitchLoggingHostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Provides the ability to add or remove a remote host entry."
::={ systemSwitchLoggingHostEntry 3 }
systemSwitchLoggingHostUserCommandHost OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this host may receive user
command data."
DEFVAL { disabled }
::={ systemSwitchLoggingHostEntry 4 }
systemSwitchLoggingHostVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name or number of the VRF to be used to send
switch logging records to."
DEFVAL { "" }
::={ systemSwitchLoggingHostEntry 5 }
systemSwitchLoggingHostv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingHostv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging remote hosts."
::={ systemSwitchLogging 11 }
systemSwitchLoggingHostv6Entry OBJECT-TYPE
SYNTAX SystemSwitchLoggingHostv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A remote switch logging server entry."
INDEX { systemSwitchLoggingHostv6IpAddr }
::={ systemSwitchLoggingHostv6Table 1 }
SystemSwitchLoggingHostv6Entry ::= SEQUENCE {
systemSwitchLoggingHostv6IpAddr Ipv6Address,
systemSwitchLoggingHostv6Port Integer32,
systemSwitchLoggingHostv6Status RowStatus,
systemSwitchLoggingHostv6UserCommandHost Enable,
systemSwitchLoggingHostv6VrfName SnmpAdminString
}
systemSwitchLoggingHostv6IpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of a remote host that can
be used to send switch logging records to."
::={ systemSwitchLoggingHostv6Entry 1 }
systemSwitchLoggingHostv6Port OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of a remote host that can
be used to send switch logging records to."
DEFVAL { 514 }
::={ systemSwitchLoggingHostv6Entry 2 }
systemSwitchLoggingHostv6Status OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Provides the ability to add or remove a remote host entry."
::={ systemSwitchLoggingHostv6Entry 3 }
systemSwitchLoggingHostv6UserCommandHost OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this host may receive user
command data."
DEFVAL { disabled }
::={ systemSwitchLoggingHostv6Entry 4 }
systemSwitchLoggingHostv6VrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name or number of the VRF to be used to send
switch logging records to."
DEFVAL { "" }
::={ systemSwitchLoggingHostv6Entry 5 }
systemSwitchLoggingHostCount OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of remote hosts currently defined."
::={ systemSwitchLogging 12}
systemSwitchLoggingConsoleLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Messages whose severity level is equal to or more
severe than this value will be displayed to the console."
DEFVAL { severityLevelWarn }
::={ systemSwitchLogging 13}
systemSwitchLoggingUserCommandStatus OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User commands will be logged to remote hosts when enabled."
DEFVAL { disabled }
::={ systemSwitchLogging 14}
systemSwitchLoggingSysLogFacilityId OBJECT-TYPE
SYNTAX SysLogFacilityId
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This textual convention enumerates the facilities
that originate syslog messages.
The Facilities of syslog messages are numerically
coded with decimal values.
Some of the operating system daemons and processes
are traditionally designated by the Facility values
given below. Daemons and processes that do not have
an explicitly assigned Facility may use any of the
'local use' Facilities or they may use the 'user-level'
Facility.
For interoperability and backwards compatibility
reasons, mapping specified in this document between
a label which represents a Facility and
the value which represents the corresponding code, is
normative. So the mapping from a label configured by
operators in syslog.conf or equivalent will consistently
map to the same Facility code regardless of
implementation, but the label itself is often
semantically meaningless, because it is impractical to
attempt to enumerate all possible facilities, and the
enumeration (label and corresponding value) that is used
by an actual Facility is, and has historically been,
implementation-dependent.
For example, the foobar application might log messages
as having come from local7, even though there is no
'local' process on the device, and the operator can
configure syslog.conf to have local7.critical messages
be relayed, even though there might be multiple facilities
using Facility local7. This is typical current practice,
and originators, relays and collectors know how to handle
this situation. For improved accuracy, the foobar
application can also include an APPNAME Structured Data
Element."
DEFVAL { uucp }
::={ systemSwitchLogging 15}
systemSwitchLoggingLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging level for a specific application id."
::={ systemSwitchLogging 16 }
systemSwitchLoggingAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Application name used as an index into the table"
DEFVAL { "" }
::={ systemSwitchLogging 17 }
systemSwitchLoggingDuplicateDetect OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging enable/disable duplicate detection"
DEFVAL { enabled }
::={ systemSwitchLogging 18 }
systemSwitchLoggingPreamble OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging enable/disable printing preamble"
DEFVAL { enabled }
::={ systemSwitchLogging 19 }
systemSwitchLoggingDebug OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging enable/disable debug information"
DEFVAL { enabled }
::={ systemSwitchLogging 20 }
systemSwitchLoggingVrf OBJECT-TYPE
SYNTAX VrfId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging subapplicastion VRF ID"
DEFVAL { 1 }
::={ systemSwitchLogging 21 }
systemSwitchLoggingHashAgeLimit OBJECT-TYPE
SYNTAX AgeLimit
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging Hash Table Age Limit"
DEFVAL { 1 }
::={ systemSwitchLogging 22 }
systemSwitchLoggingTty OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to tty"
DEFVAL { disabled }
::={ systemSwitchLogging 23 }
systemSwitchLoggingSubAppNbr OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subapplication number of a given application"
::={ systemSwitchLogging 24 }
systemSwitchLoggingLibraryName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Library name used as an index into the table of
registered libraries"
DEFVAL { "" }
::={ systemSwitchLogging 25 }
systemSwitchLoggingLoopback0 OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging using Loopback0
interface as the source ip address when logging
to syslog server"
DEFVAL { disabled }
::={ systemSwitchLogging 26 }
systemSwitchLoggingDgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingDgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging remote hosts for Dying Gasp."
::={ systemSwitchLogging 27 }
systemSwitchLoggingDgHostEntry OBJECT-TYPE
SYNTAX SystemSwitchLoggingDgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A remote switch logging server entry."
INDEX { systemSwitchLoggingDgHostIndex }
::={ systemSwitchLoggingDgHostTable 1 }
SystemSwitchLoggingDgHostEntry ::= SEQUENCE {
systemSwitchLoggingDgHostIndex Integer32,
systemSwitchLoggingDgHostIpType InetAddressType,
systemSwitchLoggingDgHostIpAddr InetAddress
}
systemSwitchLoggingDgHostIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Dying Gasp swlod table."
DEFVAL { 1 }
::={ systemSwitchLoggingDgHostEntry 1 }
systemSwitchLoggingDgHostIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type ."
::= { systemSwitchLoggingDgHostEntry 2 }
systemSwitchLoggingDgHostIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of a remote host that can
be used to send Dying Gasp switch logging records to."
::={ systemSwitchLoggingDgHostEntry 3 }
--systemDNS group. This group contains the Domain Name Service
--configuration information.
systemDNSEnableDnsResolver OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Global Domain Name Service enable/disable"
DEFVAL { disabled }
::={ systemDNS 1 }
systemDNSDomainName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"current domain name used by the Domain Name Service"
DEFVAL { "" }
::={ systemDNS 2 }
systemDNSNsAddr1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"1st part of address used by the Domain Name Service"
DEFVAL { '00000000'H } -- 0.0.0.0 or ::
::={ systemDNS 3 }
systemDNSNsAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2nd part of address used by the Domain Name Service"
DEFVAL { '00000000'H } -- 0.0.0.0 or ::
::={ systemDNS 4 }
systemDNSNsAddr3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"3rd part of address used by the Domain Name Service"
DEFVAL { '00000000'H } -- 0.0.0.0 or ::
::={ systemDNS 5 }
systemDNSNsIPv6Addr1 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the Primary DNS server"
DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0 or ::
::={ systemDNS 6 }
systemDNSNsIPv6Addr2 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the Secondary DNS server"
DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0 or ::
::={ systemDNS 7 }
systemDNSNsIPv6Addr3 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the third DNS server"
DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0 or ::
::={ systemDNS 8 }
-- systemBlueTooth group. This group contains the objects used by the
-- System BlueTooth Services.
systemServicesBluetoothEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Bluetooth."
DEFVAL { enabled }
::= { systemBlueToothServices 1}
systemServicesBluetoothTxPower OBJECT-TYPE
SYNTAX INTEGER {
low(1),
high(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Bluetooth transmit power, low or high."
DEFVAL { low }
::= { systemBlueToothServices 2}
systemServicesBluetoothTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesBluetoothEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Bluetooth devices."
::={ systemBlueToothServices 3 }
systemServicesBluetoothEntry OBJECT-TYPE
SYNTAX SystemServicesBluetoothEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Bluetooth device entry."
INDEX { systemServicesBluetoothChassisId }
::={ systemServicesBluetoothTable 1 }
SystemServicesBluetoothEntry ::= SEQUENCE {
systemServicesBluetoothChassisId VirtualOperChassisId,
systemServicesBluetoothStatus INTEGER
}
systemServicesBluetoothChassisId OBJECT-TYPE
SYNTAX VirtualOperChassisId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The chassis ID for this Bluetooth instance."
::= { systemServicesBluetoothEntry 1 }
systemServicesBluetoothStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent(1),
connectionInactive(2),
connectionActive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Bluetooth status."
::= { systemServicesBluetoothEntry 2 }
--systemFips group. This group contains the FIPS 140-2
--configuration information.
systemFipsAdminState OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the FIPS mode on AOS switches. This value
becomes the systemFipsOperState after write-memory and reboot."
DEFVAL { disabled }
::= { systemFips 1 }
systemFipsOperState OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Operational State of the FIPS mode on AOS switches"
::= { systemFips 2 }
systemVcHardwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemVcHardwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table lists the results of cable diagnostics."
::= { systemVcHardware 1 }
systemVcHardwareEntry OBJECT-TYPE
SYNTAX SystemVcHardwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry corresponding to each port."
INDEX { virtualChassisOperChasId }
::= { systemVcHardwareTable 1 }
SystemVcHardwareEntry ::= SEQUENCE {
systemVcHardwareCpuVendor SnmpAdminString,
systemVcHardwareCpuModel SnmpAdminString,
systemVcHardwareFlashMfg INTEGER,
systemVcHardwareFlashSize Counter64,
systemVcHardwareMemoryMfg INTEGER,
systemVcHardwareMemorySize Counter64,
systemVcHardwareUbootVersion SnmpAdminString,
systemVcHardwareFpga1Version SnmpAdminString,
systemVcHardwareFpga2Version SnmpAdminString,
systemVcHardwarePowerSuppliesPresent BITS,
systemVcHardwareNisPresent BITS,
systemVcHardwareCFMsPresent BITS,
systemVcHardwareFanTraysPresent BITS
}
systemVcHardwareCpuVendor OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the CPU Vendor for this chassis in the VC."
DEFVAL { "" }
::={ systemVcHardwareEntry 1 }
systemVcHardwareCpuModel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the CPU Model for this chassis in the VC."
DEFVAL { "" }
::={ systemVcHardwareEntry 2 }
systemVcHardwareFlashMfg OBJECT-TYPE
SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the manufacturer of the Flash memory
used on this chassis in the VC."
::= { systemVcHardwareEntry 3}
systemVcHardwareFlashSize OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of the flash memory available
on this chassis in the VC."
::= { systemVcHardwareEntry 4}
systemVcHardwareMemoryMfg OBJECT-TYPE
SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), toshiba(7), agilent(8), dataram(10), interward(11), notreadable(12)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the manufacturer of the RAM memory
used on this chassis in the VC"
::= { systemVcHardwareEntry 5}
systemVcHardwareMemorySize OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of the RAM memory available on
this chassis in the VC"
::= { systemVcHardwareEntry 6}
systemVcHardwareUbootVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the Uboot version for this chassis in the VC."
DEFVAL { "" }
::={ systemVcHardwareEntry 7 }
systemVcHardwareFpga1Version OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the version of one of the FPGA #1 this CMM in the VC."
DEFVAL { "" }
::= { systemVcHardwareEntry 8 }
systemVcHardwareFpga2Version OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the version of one of the FPGA #2 this CMM in the VC. If this FPGA does not exist then this will be N/A"
DEFVAL { "" }
::= { systemVcHardwareEntry 9 }
systemVcHardwarePowerSuppliesPresent OBJECT-TYPE
SYNTAX BITS {
ps1(0),
ps2(1),
ps3(2),
ps4(3),
ps5(4),
ps6(5),
ps7(6),
ps8(7),
ps9(8),
ps10(9),
ps11(10),
ps12(11),
ps13(12),
ps14(13),
ps15(14),
ps16(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A List of the Power supplies that are Present"
DEFVAL { {} }
::= { systemVcHardwareEntry 10 }
systemVcHardwareNisPresent OBJECT-TYPE
SYNTAX BITS {
ni1(0),
ni2(1),
ni3(2),
ni4(3),
ni5(4),
ni6(5),
ni7(6),
ni8(7),
ni9(8),
ni10(9),
ni11(10),
ni12(11),
ni13(12),
ni14(13),
ni15(14),
ni16(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A List of the NI's/Expansion modules Present"
DEFVAL { {} }
::= { systemVcHardwareEntry 11 }
systemVcHardwareCFMsPresent OBJECT-TYPE
SYNTAX BITS {
cfm1(0),
cfm2(1),
cfm3(2),
cfm4(3),
cfm5(4),
cfm6(5),
cfm7(6),
cfm8(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A List of the CFM's that are Present"
DEFVAL { {} }
::= { systemVcHardwareEntry 12 }
systemVcHardwareFanTraysPresent OBJECT-TYPE
SYNTAX BITS {
fanTray1(0),
fanTray2(1),
fanTray3(2),
fanTray4(3),
fanTray5(4),
fanTray6(5),
fanTray7(6),
fanTray8(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A List of the Fan Trays Present"
DEFVAL { {} }
::= { systemVcHardwareEntry 13 }
--
-- Trap Objects
--
systemSwlogName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SWLOG file name that might get overwritten since swlog file reached (90%) it size"
DEFVAL { "" }
::= { alcatelIND1SystemMIBTrapObjects 1 }
--
-- NOTIFICATIONS
--
systemSwlogSizeTrap NOTIFICATION-TYPE
OBJECTS {
systemSwlogName
}
STATUS current
DESCRIPTION
"The file specified file may get lost if not backed up , since swlog file reached 90%
of its size , please back up swlog before getting overwritten."
::= { alcatelIND1SystemMIBTraps 0 1 }
--
-- Compliance Statements
--
alcatelIND1SystemMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for
Alcatel BOP Proprietary System Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
systemMicrocodeGroup,
systemBootParamsGroup,
systemHardwareGroup,
systemServicesGroup,
systemFileSystemGroup,
systemSwitchLoggingGroup,
systemDNSGroup,
systemBlueToothServicesGroup,
systemFipsGroup,
systemVcHardwareGroup,
systemNotificationGroup
}
::= { alcatelIND1SystemMIBCompliances 1 }
--
-- Units Of Conformance
--
systemMicrocodeGroup OBJECT-GROUP
OBJECTS {
systemMicrocodePackageVersion,
systemMicrocodePackageName,
systemMicrocodePackageDescription,
systemMicrocodePackageStatus,
systemMicrocodePackageSize,
systemMicrocodeLoadedDirectory,
systemMicrocodeLoadedVersion,
systemMicrocodeLoadedName,
systemMicrocodeLoadedDescription,
systemMicrocodeLoadedSize
}
STATUS current
DESCRIPTION
"Group all the system microcode objects together"
::= { alcatelIND1SystemMIBGroups 1 }
systemBootParamsGroup OBJECT-GROUP
OBJECTS {
systemBootNetwork,
systemBootNetworkGateway,
systemBootNetworkNetmask
}
STATUS current
DESCRIPTION
"Group all the system boot parameters together"
::= { alcatelIND1SystemMIBGroups 2 }
systemHardwareGroup OBJECT-GROUP
OBJECTS {
systemHardwareFlashMfg,
systemHardwareFlashSize,
systemHardwareMemoryMfg,
systemHardwareMemorySize,
systemHardwareNVRAMBatteryLow,
systemHardwareBootCpuType,
systemHardwareJumperInterruptBoot,
systemHardwareJumperForceUartDefaults,
systemHardwareJumperRunExtendedMemoryDiagnostics,
systemHardwareJumperSpare,
systemHardwareFpgaVersionIndex,
systemHardwareFpgaVersion,
systemHardwareBootRomVersion,
systemHardwareDefaultMiniBootVersion,
systemHardwareBackupMiniBootVersion,
systemHardwareCpldVersion,
systemHardwareMinorFpgaVersion ,
systemHardwareProdRegId ,
systemHardwareRevisionRegister,
systemHardwareUbootMinibootVersion,
systemHardwareUbootVersion,
systemHardwareXfpId
}
STATUS current
DESCRIPTION
"Group all the system Hardware Data together"
::= { alcatelIND1SystemMIBGroups 3 }
systemServicesGroup OBJECT-GROUP
OBJECTS {
systemServicesDate,
systemServicesTime,
systemServicesTimezone,
systemServicesTimezoneStartWeek,
systemServicesTimezoneStartDay,
systemServicesTimezoneStartMonth,
systemServicesTimezoneStartTime,
systemServicesTimezoneOffset,
systemServicesTimezoneEndWeek,
systemServicesTimezoneEndDay,
systemServicesTimezoneEndMonth,
systemServicesTimezoneEndTime,
systemServicesEnableDST,
systemServicesWorkingDirectory,
systemServicesArg1,
systemServicesArg2,
systemServicesArg3,
systemServicesArg4,
systemServicesArg5,
systemServicesArg6,
systemServicesArg7,
systemServicesArg8,
systemServicesArg9,
systemServicesAction,
systemServicesResultCode,
systemServicesResultString,
systemServicesKtraceEnable,
systemServicesSystraceEnable,
systemServicesTtyLines,
systemServicesTtyColumns,
systemServicesMemMonitorEnable,
systemServicesKtraceLevelAppId,
systemServicesKtraceLevel,
systemServicesSystraceLevelAppId,
systemServicesSystraceLevel,
systemUpdateStatus,
systemUpdateErrorCode,
systemServicesActionPercentComplete,
systemServicesArchiveName,
systemServicesArchiveType,
systemServicesArchiveSize,
systemServicesArchiveAttr,
systemServicesUsbEnable,
systemServicesUsbAutoCopyEnable,
systemServicesUsbMounted,
systemServicesArchiveIndex,
systemServicesCurrentArchivePathName
}
STATUS current
DESCRIPTION
"Group all the system services parameters together"
::= { alcatelIND1SystemMIBGroups 4 }
systemFileSystemGroup OBJECT-GROUP
OBJECTS {
systemFileSystemIndex,
systemFileSystemFreeSpace,
systemFileSystemName,
systemFileSystemDirectoryName,
systemFileSystemDirectoryDateTime,
systemFileSystemFileIndex,
systemFileSystemFileName,
systemFileSystemFileType,
systemFileSystemFileSize,
systemFileSystemFileAttr,
systemFileSystemFileDateTime
}
STATUS current
DESCRIPTION
"Group all the system flash file parameters together"
::= { alcatelIND1SystemMIBGroups 5 }
systemSwitchLoggingGroup OBJECT-GROUP
OBJECTS{
systemSwitchLoggingIndex,
systemSwitchLoggingEnable,
systemSwitchLoggingFlash,
systemSwitchLoggingSocket,
systemSwitchLoggingSocketIpAddr,
systemSwitchLoggingConsole,
systemSwitchLoggingClear,
systemSwitchLoggingFileSize,
systemSwitchLoggingLevel,
systemSwitchLoggingApplicationAppId,
systemSwitchLoggingApplicationAppName,
systemSwitchLoggingApplicationSubAppId,
systemSwitchLoggingApplicationSubAppName,
systemSwitchLoggingApplicationSubAppLevel,
systemSwitchLoggingApplicationSubAppVrfLevelIndex,
systemSwitchLoggingApplicationSubAppVrfLevelString,
systemSwitchLoggingAppName,
systemSwitchLoggingDuplicateDetect,
systemSwitchLoggingPreamble,
systemSwitchLoggingDebug,
systemSwitchLoggingVrf,
systemSwitchLoggingHashAgeLimit,
systemSwitchLoggingTty,
systemSwitchLoggingSubAppNbr,
systemSwitchLoggingLibraryName,
systemSwitchLoggingLoopback0,
systemSwitchLoggingConsoleLevel,
systemSwitchLoggingHostCount,
systemSwitchLoggingUserCommandStatus,
systemSwitchLoggingSysLogFacilityId,
systemSwitchLoggingHostIpAddr,
systemSwitchLoggingHostPort,
systemSwitchLoggingHostStatus,
systemSwitchLoggingHostUserCommandHost,
systemSwitchLoggingHostVrfName,
systemSwitchLoggingHostv6IpAddr,
systemSwitchLoggingHostv6Port,
systemSwitchLoggingHostv6Status,
systemSwitchLoggingHostv6UserCommandHost,
systemSwitchLoggingHostv6VrfName,
systemSwitchLoggingDgHostIpType,
systemSwitchLoggingDgHostIpAddr
}
STATUS current
DESCRIPTION
"Group all the switch logging parameters together"
::= { alcatelIND1SystemMIBGroups 6 }
systemDNSGroup OBJECT-GROUP
OBJECTS{
systemDNSEnableDnsResolver,
systemDNSDomainName,
systemDNSNsAddr1,
systemDNSNsAddr2,
systemDNSNsAddr3,
systemDNSNsIPv6Addr1,
systemDNSNsIPv6Addr2,
systemDNSNsIPv6Addr3
}
STATUS current
DESCRIPTION
"Group all the systemDNS parameters together"
::= { alcatelIND1SystemMIBGroups 7 }
systemBlueToothServicesGroup OBJECT-GROUP
OBJECTS{
systemServicesBluetoothEnable,
systemServicesBluetoothTxPower,
systemServicesBluetoothStatus
}
STATUS current
DESCRIPTION
"Group all the systemFips parameters together"
::= { alcatelIND1SystemMIBGroups 8 }
systemFipsGroup OBJECT-GROUP
OBJECTS{
systemFipsAdminState,
systemFipsOperState
}
STATUS current
DESCRIPTION
"Group all the systemFips parameters together"
::= { alcatelIND1SystemMIBGroups 9 }
systemVcHardwareGroup OBJECT-GROUP
OBJECTS {
systemVcHardwareCpuVendor,
systemVcHardwareCpuModel,
systemVcHardwareFlashMfg,
systemVcHardwareFlashSize,
systemVcHardwareMemoryMfg,
systemVcHardwareMemorySize,
systemVcHardwareUbootVersion,
systemVcHardwareFpga1Version,
systemVcHardwareFpga2Version,
systemVcHardwarePowerSuppliesPresent,
systemVcHardwareNisPresent,
systemVcHardwareCFMsPresent,
systemVcHardwareFanTraysPresent
}
STATUS current
DESCRIPTION
"Group all the system VC Hardware Data together"
::= { alcatelIND1SystemMIBGroups 10 }
systemSwlogGroup OBJECT-GROUP
OBJECTS {
systemSwlogName
}
STATUS current
DESCRIPTION
"Group all the swlog trap objects together"
::= { alcatelIND1SystemMIBGroups 11 }
systemNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
systemSwlogSizeTrap
}
STATUS current
DESCRIPTION
"A collection of notifications for System Services events."
::= { alcatelIND1SystemMIBGroups 12 }
END