mibs/nokia/aos7/ALCATEL-IND1-TIMETRA-PORT-MIB
ALCATEL-IND1-TIMETRA-PORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Unsigned32,
Counter32, IpAddress, Counter64,
Integer32, Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION, DateAndTime,
RowStatus, TimeStamp, TimeInterval,
TruthValue, MacAddress, RowPointer,
DisplayString FROM SNMPv2-TC
TmnxActionType, TmnxPortID,
TItemDescription, TNamedItemOrEmpty,
TNamedItem, TFCName, TQueueId,
TmnxOperState, TPortSchedulerPIR,
TPortSchedulerCIR, TItemLongDescription,
TSecondaryShaper10GPIRRate,
TMlpppQoSProfileId FROM ALCATEL-IND1-TIMETRA-TC-MIB
timetraSRMIBModules FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB
tmnxHwObjs, tmnxHwNotification,
tmnxHwConformance, tmnxChassisIndex,
tmnxChassisNotifyChassisId,
TmnxAlarmState, TmnxPortAdminStatus,
TmnxMDAChanType FROM ALCATEL-IND1-TIMETRA-CHASSIS-MIB
;
tmnxPortMIBModule MODULE-IDENTITY
LAST-UPDATED "0801010000Z"
ORGANIZATION "Alcatel"
CONTACT-INFO
"Alcatel 7x50 Support
Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the
hardware components of the Alcatel 7x50 device.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's
proprietary intellectual property. Alcatel retains
all title and ownership in the Specification, including any
revisions.
Alcatel grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
--
-- Revision History
--
REVISION "0801010000Z"
DESCRIPTION "Rev 6.0 01 Jan 2008 00:00
6.0 release of the TIMETRA-PORT-MIB."
REVISION "0701010000Z"
DESCRIPTION "Rev 5.0 01 Jan 2007 00:00
5.0 release of the TIMETRA-PORT-MIB."
REVISION "0603160000Z"
DESCRIPTION "Rev 4.0 16 Mar 2006 00:00
4.0 release of the TIMETRA-PORT-MIB."
REVISION "0508310000Z"
DESCRIPTION "Rev 3.0 31 Aug 2005 00:00
3.0 release of the TIMETRA-PORT-MIB."
REVISION "0501240000Z"
DESCRIPTION "Rev 2.1 24 Jan 2005 00:00
2.1 release of the TIMETRA-PORT-MIB."
REVISION "0403010000Z"
DESCRIPTION "Rev 2.0 01 Mar 2004 00:00
2.0 release of the TIMETRA-PORT-MIB."
::= { timetraSRMIBModules 25 }
tmnxPortObjs OBJECT IDENTIFIER ::= { tmnxHwObjs 4 }
tmnxPortNotificationObjects OBJECT IDENTIFIER ::= { tmnxHwObjs 7 }
tmnxFRObjs OBJECT IDENTIFIER ::= { tmnxHwObjs 9 }
tmnxQosAppObjs OBJECT IDENTIFIER ::= { tmnxHwObjs 10 }
tmnxATMObjs OBJECT IDENTIFIER ::= { tmnxHwObjs 11 }
tmnxPortStatsObjs OBJECT IDENTIFIER ::= { tmnxHwObjs 12 }
tmnxPortNotifyPrefix OBJECT IDENTIFIER ::= { tmnxHwNotification 2 }
tmnxPortNotification OBJECT IDENTIFIER ::= { tmnxPortNotifyPrefix 0 }
tmnxPortConformance OBJECT IDENTIFIER ::= { tmnxHwConformance 2 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- ALCATEL-IND1-TIMETRA-PORT-MIB textual conventions
--
--
-- TmnxPortOperStatus
--
TmnxPortOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The current operational status of this port."
SYNTAX INTEGER {
unknown (1),
inService (2),
outOfService (3),
diagnosing (4),
failed (5)
}
--
-- TmnxPortEtherReportValue
--
TmnxPortEtherReportValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxPortEtherReportValue is an enumerated integer that describes
the values used to identify the reason an alarm has been raised on an
Ethernet Port."
SYNTAX INTEGER {
notUsed (0), -- not applicable
signalFailure(1), -- Ethernet signal lost alarm
remoteFault (2), -- Remote Fault
localFault (3), -- Local Fault
noFrameLock (4), -- Not locked on the Ethernet framing sequence
highBer (5) -- High Bit Error Rate
}
--
-- TmnxPortEtherReportStatus
--
TmnxPortEtherReportStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxPortEtherReportStatus is a bitmask that describes alarms that
can be raised/cleared on an Ethernet Port."
SYNTAX BITS {
notUsed (0), -- not applicable
signalFailure(1), -- Ethernet signal lost alarm
remoteFault (2), -- Remote Fault
localFault (3), -- Local Fault
noFrameLock (4), -- Not locked on the Ethernet framing sequence
highBer (5) -- High Bit Error Rate
}
--
-- TmnxPortClass
--
TmnxPortClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxPortClass data type is an enumerated integer that
describes the values used to identify the class of interface
provided by this port."
SYNTAX INTEGER {
none (1), -- no port installed
faste (2), -- Fast Ethernet (10/100MBS)
gige (3), -- Gigabit Ethernet
xgige (4), -- Ten-Gigabit Ethernet
sonet (5), -- SONET
vport (6), -- Virtual port
unused(7), -- Unused
xcme (8), -- 10/100/1000 Ethernet
tdm (9) -- TDM
}
--
-- TmnxPortConnectorType
--
TmnxPortConnectorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxPortConnectorType data type is an enumerated integer that
describes the values used to identify the connector type used on
a port. A TmnxPortConnectorType value specifies the index value
for the entry in the tmnxPortConnectTypeTable used to identify a
specific type of port connector. Some example port connector types
are: 'unknown', 'rj45', 'bncCoax', 'mtrj', 'scDuplex', 'sffp',
'lcDuplex'."
SYNTAX Unsigned32
--
-- TmnxPortState
--
TmnxPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state level of this port. A value of 'none' indicates the
port is either in its initial creation state or is just about to
be deleted. A value of 'ghost' represents a port that is not
physically present. This state may represent a pre-provisioned
port. A value of 'linkDown' represents a port that is physically
present but does not have a link. The 'linkUp' state represents a
port that is physically present and has physical link present.
A port in 'up' state is ready to pass some kinds of traffic.
The tmnxPortUpProtocols variable indicates the actual type(s) of
traffic that can be passed on this 'up' link. The 'diagnose' state
represents the port undergoing diagnostic test."
SYNTAX INTEGER {
none (1),
ghost (2),
linkDown (3),
linkUp (4),
up (5),
diagnose (6)
}
--
-- TmnxPortType
--
TmnxPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxPortType data type is an enumerated integer that describes
the values used to identify the specific type of hardware port.
A TmnxPortType value specifies the index value for the entry in the
tmnxPortTypeTable used to identify a specific type of port.
Some example port types are:
-- unknown - no port installed or unidentified
-- portType100Tx - 10/100 base copper
-- portType100F - 10/100 base fiber
-- portType1000Tx - 1000 base copper
-- portType1000F - 1000 base fiber
-- portType1000dF - 1000 base dual fiber
-- portTypeOC3sonet - OC-3
-- portTypeOC12sonet - OC-12
-- portTypeOC48sonet - OC-48
-- portTypeOC192sonet - OC-192
-- portType10000F - 10 Gig Ethernet LAN
-- portTypeXgigWan - 10 Gig Ethernet WAN
-- portTypeVport - Virtual port
-- portTypeDS3E3 - DS3/E3 port
-- portTypeDS1E1 - DS1/E1 port
"
SYNTAX Unsigned32
--
-- TmnxDs0ChannelList
--
TmnxDs0ChannelList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A list of ds0 timeslots on a DS1 line.
The list is specified as an OCTET STRING in which each ds0
timeslot is represented by a single bit, where timeslots 1
through 8 are represented by the bits in the first octet,
timeslots 9 through 16 by the bits in the second octet,
etc. In each octet, the lowest numbered timeslot is
represented by the most significant bit, and the highest
numbered timeslot by the least significant bit. A timeslot
is present in the list when its bit is 1, and absent
when its bit is 0.
If the OCTET STRING value has more bits than required to
represent the timeslots on a DS1, then the extra bits
are ignored."
SYNTAX OCTET STRING (SIZE(0..4))
--
-- TmnxBundleID
--
TmnxBundleID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A TmnxBundleID is an unique 32 bit number encoded as shown below.
|32 30| 29 26 | 25 22 | 21 16 | 15 13 | 12 1|
+-----+-------+-------+-------+-----------+-------+
|001 | slot | mda | 0 | bndl type | bndlid|
+-----+-------+-------+-------+-----------+-------+
The bundle id is unique for a MDA. The bndlid must fall in one of
the following ranges depending on MDA type:
mda-type range
m4-choc3-as-sfp 1-256
m1-choc12-as-sfp 1-256
m12-chds3-as 1-256
m4-chds3-as 1-112
m4-chds3 1-56
m12-chds3 1-56
m1-choc12-sfp 1-56
m4-choc3-sfp 1-56
c8-chds1 1-56
c8-atmds1 1-8
A slot value of 15 (Invalid slot) and mda value of 0 (invalid mda)
represents a bundle protection group.
Otherwise, the bundle is considered associated with a valid slot
and mda.
The following bundle types are supported:
bndl type value
MLPPP 000
IMA 001"
SYNTAX Unsigned32
--
-- TmnxDSXBertPattern
--
TmnxDSXBertPattern ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXBertPattern data type is an enumerated integer that
indicates the pattern used for the Bit Error Rate Test (BERT)."
SYNTAX INTEGER {
none (0),
ones (1),
zeros (2),
alternating (3),
twoexp3 (4),
twoexp9 (5),
twoexp15 (6),
twoexp20 (7),
twoexp11 (8),
twoexp20q (9),
twoexp23 (10)
}
--
-- TmnxDSXBertOperStatus
--
TmnxDSXBertOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXBertOperStatus data type is an enumerated integer that
indicates the status of Bit Error Rate Test (BERT).
When BERT is activated, the status will be 'active'. Otherwise
the status will be 'idle' or 'noMdaResources' if the last BERT test
could not be executed because of an MDA concurrent BERT test limit."
SYNTAX INTEGER {
none (0),
active (1),
idle (2),
noMdaResources (3)
}
--
-- TmnxDSXIdleCycleFlags
--
TmnxDSXIdleCycleFlags ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXIdleCycleFlags data type is an enumerated integer that
indicates the value that the DS3/DS1 port/channel or a DS0 channel
group transmits during idle cycle.
The value of 'none' is applicable to ATM and CEM ports/channels only,
which transmits idle cells and not octets defined by the below values.
If the value is set to 'flags', a value of 0x7E is used.
If the value is set to 'ones', a value of 0xFF is used."
SYNTAX INTEGER {
none (0),
flags (1),
ones (2)
}
--
-- TmnxDSXIdleFillType
--
TmnxDSXIdleFillType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXIdleFillType data type is an enumerated integer that
indicates the type of data fill that a CEM DS3/DS1 channel or a DS0
channel group plays out when the channel experiences underun.
- The value of 'notApplicable' indicates that this object is not
applicable to the channel.
- The value of 'allOnes' indicates that all 1's will be played out.
- The value of 'userDefinedPattern' indicates that a user defined
pattern will be played out."
SYNTAX INTEGER {
notApplicable (0),
allOnes (1),
userDefinedPattern (2)
}
--
-- TmnxDSXLoopback
--
TmnxDSXLoopback ::= TEXTUAL-CONVENTION
STATUS obsolete
DESCRIPTION
"The TmnxDSXLoopback data type is an enumerated integer that
indicates the type of loopback the DS3/DS1 port/channel
currently is in."
SYNTAX INTEGER {
none (0),
line (1),
internal (2),
remote (3)
}
--
-- TmnxDSXReportAlarm
--
TmnxDSXReportAlarm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXReportAlarm data type indicates the type of TDM alarm:
ais - alarm indication signal errors.
los - loss of signal errors.
oof - out-of-frame errors.
rai - resource availability indicator events.
looped - far end wants the read end to loopback
berSd - DSX bit error signal degradation
berSf - DSX bit error signal failure"
SYNTAX BITS {
notUsed (0),
ais (1),
los (2),
oof (3),
rai (4),
looped (5),
berSd (6),
berSf (7)
}
--
-- TmnxDSXClockSource
--
TmnxDSXClockSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXClockSource data type is an enumerated type
that indicates the clock for transmitted data on a DS3 or DS1 channel.
loopTimed(1) - The clock is recovered from the line's receive
data stream
nodeTimed(2) - The clock is internal
adaptive(3) - The clock is adaptively recovered from the rate at
which data is received and not from the physical
layer.
differential(4) - The clock is recovered from differential RTP
timestamp header."
SYNTAX INTEGER {
loopTimed (1),
nodeTimed (2),
adaptive (3),
differential (4)
}
--
-- TmnxDSXClockSyncState
--
TmnxDSXClockSyncState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDSXClockSyncState data type is an enumeration type that
indicates the clock synchronization state on a DS3 or DS1 channel.
unknown(0) - Unsupported or unknown state
normal(1) - Normal (locked) state
holdOver(2) - Synchronization with reference has been lost
freeRun(3) - Synchronized with internal reference"
SYNTAX INTEGER {
unknown (0),
normal (1),
holdOver (2),
freeRun (3)
}
--
-- TmnxDS1Loopback
--
TmnxDS1Loopback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDS1Loopback data type is an enumerated integer that
indicates the type of loopback the DS1 port/channel
currently is in.
A 'line' loopback loops frames received on this port back to the
remote system.
A 'internal' loopback loops frames from the local system back at
the framer.
A 'fdlAnsi' requests a line loopback of type FDL ANSI T1.403.
A 'fdlBellcore' requests a line loopback of type FDL Bellcore
TR-TSY-000312.
A 'payloadAnsi' requests a payload loopback of type FDL ANSI T1.403.
A 'inbandAnsi' requests a line loopback of type inband ANSI T1.403.
A 'inbandBellcore' requests a line loopback of type inband Bellcore
TR-TSY-000312."
SYNTAX INTEGER {
none (0),
line (1),
internal (2),
fdlAnsi (3),
fdlBellcore (4),
payloadAnsi (5),
inbandAnsi (6),
inbandBellcore (7)
}
--
-- TmnxDS3Loopback
--
TmnxDS3Loopback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxDS3Loopback data type is an enumerated integer that
indicates the type of loopback the DS3 port/channel
currently is in.
A 'line' loopback loops frames received on this port back to the
remote system.
A 'internal' loopback loops the frames from the local system back at
the framer.
When the value is set to 'remote', a signal is sent to the remote
system to provide a line loopback."
SYNTAX INTEGER {
none (0),
line (1),
internal (2),
remote (3)
}
--
-- TmnxImaGrpState
--
TmnxImaGrpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaGrpState indicates the current state
of the IMA Group State Machine."
SYNTAX INTEGER {
invalid (0),
notConfigured (1),
startUp (2),
startUpAck (3),
configAbortUnsupportedM (4),
configAbortIncompatibleSymmetry (5),
configAbortOther (6),
insufficientLinks (7),
blocked (8),
operational (9),
configAbortUnsupportedImaVersion (10)
}
TmnxImaGrpFailState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaGrpFailState indcates the failure
reason of an IMA group."
SYNTAX INTEGER {
noFailure(1), -- unit is up
startUpNe(2),
startUpFe(3),
invalidMValueNe(4),
invalidMValueFe(5),
failedAssymetricNe(6),
failedAssymetricFe(7),
insufficientLinksNe(8),
insufficientLinksFe(9),
blockedNe(10),
blockedFe(11),
otherFailure(12),
invalidImaVersionNe(13),
invalidImaVersionFe(14)
}
TmnxImaLnkState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaLnkState indicates the current
state of an IMA link."
SYNTAX INTEGER {
notInGroup(1),
unusableNoGivenReason(2),
unusableFault(3),
unusableMisconnected(4),
unusableInhibited(5),
unusableFailed(6),
usable(7),
active(8)
}
TmnxImaLnkFailState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaLnkFailState indicates the local failure
status of a link belonging to an IMA group."
SYNTAX INTEGER {
noFailure(1),
imaLinkFailure(2),
lifFailure(3),
lodsFailure(4),
misConnected(5),
blocked(6),
fault(7),
farEndTxLinkUnusable(8),
farEndRxLinkUnusable(9) }
TmnxImaTestState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaTestState indicates the current state
of the test pattern procedure."
SYNTAX INTEGER {
disabled(1),
operating(2),
failed(3) }
TmnxImaGrpClockModes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaGrpClockModes lists the types of
clock modes available to IMA Groups."
SYNTAX INTEGER {
ctc(1),
itc(2) }
TmnxImaGrpVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxImaGrpVersion lists the types of
Ima versions available per IMA Groups."
SYNTAX INTEGER {
oneDotZero(1),
oneDotOne(2) }
TmnxMcMlpppClassIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxMcMlpppClassIndex indicates the class
of a Multiclass MLPPP bundle.
For Multiclass MLPPP bundles with a non-zero
tmnxBundleMlpppClassCount of classes, class index takes
valid values from 0 to (tmnxBundleMlpppClassCount - 1)
inclusive. For example a 4-class MLPPP bundle has 4 classes
with indices 0, 1, 2, and 3."
SYNTAX INTEGER (0..15)
TmnxMlpppEndpointIdClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxMlpppEndpointIdClass indicates the MLPPP Endpoint
Discriminator Class Field Type."
SYNTAX INTEGER {
nullClass (0),
localAddress (1),
ipAddress (2),
ieee802dot1GlobalMacAddress (3),
pppMagicNumberBlock (4),
publicSwitchedNetworkDirNumber (5)}
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- ALCATEL-IND1-TIMETRA-PORT-MIB at a glance
--
-- timetra (enterprises 6527)
-- timetraProducts (3)
-- tmnxSRMIB (1)
-- tmnxSRConfs (1)
-- tmnxSRObjs (2)
-- tmnxHwObjs (tmnxSRObjs 2)
-- tmnxSRNotifyPrefix (3)
--
-- tmnxPortObjs (tmnxHwObjs 4)
-- tmnxPortTableLastChange (1)
-- tmnxPortTable (2)
-- tmnxPortTestTable (3)
-- tmnxPortEtherTable (4)
-- tmnxSonetTable (5)
-- tmnxSonetPathTable (6)
-- tmnxPortTypeTable (7)
-- tmnxPortConnectTypeTable (8)
-- tmnxPortFCStatsTable (9)
-- tmnxDS3Table (10)
-- tmnxDS3ChannelTable (11)
-- tmnxDS1Table (12)
-- tmnxDS0ChanGroupTable (13)
-- tmnxBundleTable (14)
-- tmnxBundleMemberTable (15)
-- tmnxPortToChannelTable (16)
-- tmnxPortIngrMdaQosStatTable (17)
-- tmnxSonetGroupTable (18)
-- tmnxPortScalarObjs (19)
-- tmnxCiscoHDLCTable (20)
-- tmnxBundleImaGrpTable (21)
-- tmnxBundleMemberImaTable (22)
-- tmnxDS1PortTable (23)
-- tmnxPortSchedOverrideTable (24)
-- tmnxBPGrpAssocTable (25)
-- tmnxBundleMlpppTable (26)
-- tmnxDigitalDiagMonitorTable (29)
--
-- tmnxPortNotificationObjects (7)
-- tmnxPortNotifyPortId (1)
-- tmnxPortNotifySonetAlarmReason (2)
-- tmnxPortNotifySonetPathAlarmReason (3)
-- tmnxPortNotifyError (4)
-- tmnxPortNotifyDS3AlarmReason (5)
-- tmnxPortNotifyDS1AlarmReason (6)
-- tmnxPortNotifyBundleId (7)
-- tmnxPortNotifyEtherAlarmReason (8)
--
-- tmnxFRObjs (9)
-- tmnxFRDlcmiTable (1)
--
-- tmnxQosAppObjs (10)
-- tmnxQosPoolAppTable (2)
--
-- tmnxATMObjs (11)
-- tmnxATMIntfTable (1)
--
-- tmnxPortStatsObjs (12)
-- tmnxPortNetIngressStatsTable (1)
-- tmnxPortNetEgressStatsTable (2)
-- tmnxCiscoHDLCStatsTable (3)
-- tmnxMcMlpppStatsTable (4)
--
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- IOM Port tables
--
tmnxPortTableLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the tmnxPortTable was last changed."
::= { tmnxPortObjs 1 }
tmnxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table has an entry for each port on each IOM card in each
chassis in the TMNX system."
::= { tmnxPortObjs 2 }
tmnxPortEntry OBJECT-TYPE
SYNTAX TmnxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a port on a IOM card in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its supported tmnxPortEntry rows must be in the proper
state for removal."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxPortTable 1 }
TmnxPortEntry ::=
SEQUENCE {
tmnxPortPortID TmnxPortID,
tmnxPortLastChangeTime TimeStamp,
tmnxPortType TmnxPortType,
tmnxPortClass TmnxPortClass,
tmnxPortDescription TItemLongDescription,
tmnxPortName TNamedItemOrEmpty,
tmnxPortAlias TNamedItemOrEmpty,
tmnxPortUserAssignedMac TruthValue,
tmnxPortMacAddress MacAddress,
tmnxPortHwMacAddress MacAddress,
tmnxPortMode INTEGER,
tmnxPortEncapType INTEGER,
tmnxPortLagId Unsigned32,
tmnxPortHoldTimeUp Unsigned32,
tmnxPortHoldTimeDown Unsigned32,
tmnxPortUpProtocols BITS,
tmnxPortConnectorType TmnxPortConnectorType,
tmnxPortTransceiverType INTEGER,
tmnxPortTransceiverCode BITS,
tmnxPortTransceiverLaserWaveLen Unsigned32,
tmnxPortTransceiverDiagCapable INTEGER,
tmnxPortTransceiverModelNumber TNamedItemOrEmpty,
tmnxPortSFPConnectorCode INTEGER,
tmnxPortSFPVendorOUI Unsigned32,
tmnxPortSFPVendorManufactureDate DateAndTime,
tmnxPortSFPMedia INTEGER,
tmnxPortSFPEquipped TruthValue,
tmnxPortEquipped TruthValue,
tmnxPortLinkStatus TruthValue,
tmnxPortAdminStatus TmnxPortAdminStatus,
tmnxPortOperStatus TmnxPortOperStatus,
tmnxPortState TmnxPortState,
tmnxPortPrevState TmnxPortState,
tmnxPortNumAlarms Unsigned32,
tmnxPortAlarmState TmnxAlarmState,
tmnxPortLastAlarmEvent RowPointer,
tmnxPortClearAlarms TmnxActionType,
tmnxPortSFPVendorSerialNum TNamedItemOrEmpty,
tmnxPortSFPVendorPartNum TNamedItemOrEmpty,
tmnxPortLastStateChanged TimeStamp,
tmnxPortNumChannels Unsigned32,
tmnxPortNetworkEgrQueues TNamedItemOrEmpty,
tmnxPortBundleNumber INTEGER,
tmnxPortIsLeaf TruthValue,
tmnxPortChanType TmnxMDAChanType,
tmnxPortParentPortID TmnxPortID,
tmnxPortOpticalCompliance OCTET STRING,
tmnxPortLoadBalanceAlgorithm INTEGER,
tmnxPortEgrPortSchedPlcy TNamedItemOrEmpty,
tmnxPortLastClearedTime TimeStamp,
tmnxPortIngNamedPoolPlcy TNamedItemOrEmpty,
tmnxPortEgrNamedPoolPlcy TNamedItemOrEmpty,
tmnxPortIngPoolPercentRate Unsigned32,
tmnxPortEgrPoolPercentRate Unsigned32,
tmnxPortDDMEventSuppression TruthValue,
tmnxPortSFPStatus INTEGER
}
tmnxPortPortID OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxPortPortID is an index into this table. It maps this port to its
entry in the mib-2 interfaces table."
::= { tmnxPortEntry 1 }
tmnxPortLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxPortEntry row for this port."
::= { tmnxPortEntry 2 }
tmnxPortType OBJECT-TYPE
SYNTAX TmnxPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port or optical pack installed."
::= { tmnxPortEntry 3 }
tmnxPortClass OBJECT-TYPE
SYNTAX TmnxPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The class of port or optical pack installed. This can be
derived from tmnxPortType."
::= { tmnxPortEntry 4 }
tmnxPortDescription OBJECT-TYPE
SYNTAX TItemLongDescription
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing user supplied information about the
interface."
DEFVAL { ''H }
::= { tmnxPortEntry 5 }
tmnxPortName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might be a text
name, such as `le0' or 'sys171-2/1."
::= { tmnxPortEntry 6 }
tmnxPortAlias OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.
On the first instantiation of an interface, the value of
tmnxPortAlias associated with that interface is the zero-length
string. As and when a value is written into an instance of
tmnxPortAlias through a network management set operation, then the
agent must retain the supplied value in the tmnxPortAlias instance
associated with the same interface for as long as that
interface remains instantiated, including across all re-
initializations/reboots of the network management system."
DEFVAL { ''H }
::= { tmnxPortEntry 7 }
tmnxPortUserAssignedMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When tmnxPortUserAssignedMac has a value of 'true', the value of
tmnxPortMacAddress has been explicitly assigned by a SNMP SET
request. When tmnxPortUserAssignedMac is set to 'false',
tmnxPortMacAddress returns the system assigned MAC address."
DEFVAL { false }
::= { tmnxPortEntry 8 }
tmnxPortMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When tmnxPortUserAssignedMac has a value of 'true',
tmnxPortMacAddress has the value that has been explicitly
assigned by a SNMP SET request. When tmnxPortUserAssignedMac
has a value of 'false', tmnxPortMacAddress returns the same
value as tmnxPortMacAddress, the hardware or system assigned
MAC address. When tmnxPortMacAddress is modified by a SET
request, the agent sets tmnxPortUserAssignedMac to 'true'.
Setting tmnxPortMacAddress to all zeros causes the agent to
revert to using the default tmnxPortHwMacAddress and also to
return tmnxPortUserAssignedMac as 'false'."
DEFVAL { '000000000000'h }
::= { tmnxPortEntry 9 }
tmnxPortHwMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's hardware or system assigned MAC address at its
protocol sub-layer. When tmnxPortUserAssignedMac has a value of
'true', the value of tmnxPortMacAddress is used instead of
tmnxPortHwMacAddress.
In the case of a pre-provisioned port that is not yet physically
in the system, the MAC address may not be known. In this case
a MAC address of all zeros is returned."
::= { tmnxPortEntry 10 }
tmnxPortMode OBJECT-TYPE
SYNTAX INTEGER {
undefined (0),
access (1),
network (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortMode variable indicates if the interface on this port
is configured as a service access port or a network access
port.
If the port mode equals 'access', and the tmnxMDAAssignedType
is of ATM MDA family, then tmnxPortEncapType is automatically
set to 'atmEncap'.
If port mode equals 'access', tmnxPortEncapType must also
be configured to 'qEncap' (For Ethernet MDAs) or to
'bcpNullEncap' for Sonet/SDH MDAs.
Once the port's operation mode has been configured
for 'access' mode, multiple services may be configured
on the port.
If the port mode equals 'network', tmnxPortEncapType must also
be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap'
(Sonet/SDH MDAs) and tmnxPortEncapType is defaulted to those
values on the mode change."
::= { tmnxPortEntry 11 }
tmnxPortEncapType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
nullEncap (1),
qEncap (2),
mplsEncap (3),
bcpNullEncap (4),
bcpDot1qEncap (5),
ipcpEncap (6),
frEncap (7),
pppAutoEncap (8),
atmEncap (9),
qinqEncap (10),
wanMirrorEncap (11),
ciscoHDLCEncap (12),
cemEncap (13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of encapsulation protocol configured on this
port's network interface. If tmnxPortEncapType has a value
of 'nullEncap', frames received will not carry any tags
or labels and as a result only one service can be
configured on this port. Sometimes this is referred to
as raw Ethernet packets.
If tmnxPortEncapType has a value of 'qEncap', ingress frames
carry 802.1q tags where each different tag can signify a
different service. This is not a valid value if
tmnxPortClass has a value of 'sonetPath'.
If tmnxPortEncapType has a value of 'bcpNullEncap',
Bcp is used on the sonet path as the NCP control protocol.
The BCP IEEE 802 Tagged Frame Configuration Option (type 8)
is negotiated to 'enabled'. VLAN tagged frames are
allowed into the sonet path. Only a single SAP can
be associated with the sonet path. 'bcpNullEncap' is
valid only if tmnxPortClass has a value of 'sonetPath'.
If tmnxPortEncapType has a value of 'bcpDot1qEncap',
BCP is used as the NCP control protocol. The BCP IEEE 802
Tagged Frame Configuration Option (type 8) is negotiated to
'enabled'. VLAN tagged frames are allowed on the sonet path.
This encapsulation type is required when multiple SAPs are
defined on the sonet path where each one is service
delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap'
is specified, BCP does not enter the 'open' state unless
the far end peer also supports 'bcpDot1qEncap'. This allows
a LCP negotiation to transmit configuration request and
confirmation messages to enable this feature. 'bcpDot1qEncap'
is a valid value only if tmnxPortClass has a value of 'sonetPath'.
If tmnxPortEncapType has a value of 'ipcpEncap',
BCP will not be used on this sonet path. IPCP NCP is used
instead. 'ipcpEncap' is a valid only if tmnxPortClass has
a value of 'sonetPath'.
If tmnxPortEncapType has a value of 'frEncap', Frame Relay is
the expected encapsulation.
If tmnxPortEncapType has a value of 'pppAutoEncap', IPCP is
automatically enabled. This encap type is only valid on
ports/paths in network mode.
If tmnxPortEncapType has a value of 'atmEncap', the encapsulation
on the port is ATM. The 'atmEncap' is also used when mirroring
ATM ports.
If tmnxPortEncapType has a value of 'wanMirrorEncap', the
port is used for mirroring of frame-relay and POS ports. On such
ports no link management protocol would run.
If tmnxPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC
encapsulation is applied. This encap type is only valid if
TmnxPortClass has a value of 'tdm' or 'sonet'.
If tmnxPortEncapType has a value of 'cemEncap', encapsulation of
frames will be circuit emulation. This is used to support transparent
transmission of frames. This encap type is only valid
if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode.
tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and
TDM ports.
"
::= { tmnxPortEntry 12 }
tmnxPortLagId OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortLagId indicates which LAG or multi-link trunk
(MLT) this port is assigned to. If this port is not associated
with any LAG, this value will be set to zero(0).
The maximum value of this object is '64', when the value of
ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1)."
DEFVAL { 0 }
::= { tmnxPortEntry 13 }
tmnxPortHoldTimeUp OBJECT-TYPE
SYNTAX Unsigned32 (0..50)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortHoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that an up transition is reported
immediately. The value of tmnxPortHoldTimeUp is not applicable
when tmnxPortClass has a value of 'sonet (5)'. In that case,
tmnxSonetHoldTimeUp is used instead."
DEFVAL { 0 }
::= { tmnxPortEntry 14 }
tmnxPortHoldTimeDown OBJECT-TYPE
SYNTAX Unsigned32 (0..50)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortHoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that a down transition is reported
immediately. The value of tmnxPortHoldTimeDown is not applicable
when tmnxPortClass has a value of 'sonet (5)'. In that case,
tmnxSonetHoldTimeDown is used instead."
DEFVAL { 0 }
::= { tmnxPortEntry 15 }
tmnxPortUpProtocols OBJECT-TYPE
SYNTAX BITS {
portUpIpv4 (0),
portUpMpls (1),
portUpBcp (2),
portUpIso (3),
portUpFr (4),
portUpAtm (5),
portUpChdlc (6),
portUpIma (7),
portUpIpv6 (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortUpProtocols variable is a bitmap that indicates what
protocols can be used on this port type."
::= { tmnxPortEntry 16 }
tmnxPortConnectorType OBJECT-TYPE
SYNTAX TmnxPortConnectorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of connector installed on this port."
::= { tmnxPortEntry 17 }
tmnxPortTransceiverType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
gbic(1),
moduleConnectorSolderedToMotherboard(2),
sfpTransceiver(3),
xbiTransceiver(4),
xenpakTransceiver(5),
xfpTransceiver(6),
xffTransceiver(7),
xfpeTransceiver(8),
xpakTransceiver(9),
x2Transceiver(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the transceiver."
::= { tmnxPortEntry 25 }
tmnxPortTransceiverCode OBJECT-TYPE
SYNTAX BITS{
unknown(0),
oc48-longreach(1),
oc48-intermediatereach(2),
oc48-shortreach(3),
oc12-singlemodelongreach(4),
oc12-singlemodeinterreach(5),
oc12-multimodeshortreach(6),
oc3-singlemodelongreach(7),
oc3-singlemodeinterreach(8),
oc3-multi-modeshortreach(9),
gige-1000base-t(10),
gige-1000base-cx(11),
gige-1000base-lx(12),
gige-1000base-sx(13),
faste-100base-mm-fx(14),
faste-100base-sm-fx(15),
xgige-10gbase-sr(16),
xgige-10gbase-lr(17),
xgige-10gbase-er(18),
xgige-10gbase-sw(19),
xgige-10gbase-lw(20),
xgige-10gbase-ew(21)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The code for the transmission media.
tmnxPortOpticalCompliance is used instead of
tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the
same information and is defined by an industry standard."
::= { tmnxPortEntry 26 }
tmnxPortTransceiverLaserWaveLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The light wavelength transmitted by the transceiver's laser.
A value of zero indicates that the port is not equipped with
the transceiver."
::= { tmnxPortEntry 27 }
tmnxPortTransceiverDiagCapable OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the transceiver is capable of doing diagnostics."
::= { tmnxPortEntry 28 }
tmnxPortTransceiverModelNumber OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Model number of the transceiver."
::= { tmnxPortEntry 29 }
tmnxPortSFPConnectorCode OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
sc(1),
fiberChannel-Style1-CopperConnector(2),
fiberChannel-Style2-CopperConnector(3),
bncortnc(4),
fiberChannelCoaxialHeaders(5),
fiberJack(6),
lc(7),
mt-rj(8),
mu(9),
sg(10),
opticalPigtail(11),
hssdcII(32),
copperPigtail(33),
copperGigE(128)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external connector provided on the interface."
::= { tmnxPortEntry 30 }
tmnxPortSFPVendorOUI OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor.
A value of all zero indicates that the vendor OUI
is unspecified."
::= { tmnxPortEntry 31 }
tmnxPortSFPVendorManufactureDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's date code."
::= { tmnxPortEntry 32 }
tmnxPortSFPMedia OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
ethernet(1),
sonetsdh(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The media supported for the SFP."
::= { tmnxPortEntry 33 }
tmnxPortSFPEquipped OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the SFP is equipped."
::= { tmnxPortEntry 34 }
tmnxPortEquipped OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if there is an optics pack installed in this
port or not."
::= { tmnxPortEntry 35 }
tmnxPortLinkStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the port has a physical link."
::= { tmnxPortEntry 36 }
tmnxPortAdminStatus OBJECT-TYPE
SYNTAX TmnxPortAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired administrative status of this port."
DEFVAL { inService }
::= { tmnxPortEntry 37 }
tmnxPortOperStatus OBJECT-TYPE
SYNTAX TmnxPortOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of this port."
::= { tmnxPortEntry 38 }
tmnxPortState OBJECT-TYPE
SYNTAX TmnxPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state level of this port. A value of 'none' indicates
the port is either in its initial creation state or is
just about to be deleted. A value of 'ghost' represents
a port that is not physically present. This state may
represent a pre-provisioned port. A value of 'linkDown'
represents a port that is physically present but does
not have a link. The 'linkUp' state represents a port
that is physically present and has physical link present.
A port in 'up' state is ready to pass some kinds of traffic.
The tmnxPortUpProtocols variable indicates the actual type(s)
of traffic can be passed on this 'up' link."
::= { tmnxPortEntry 39 }
tmnxPortPrevState OBJECT-TYPE
SYNTAX TmnxPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortPrevState indicates the state level that the port
transitioned from into the current tmnxPortState level."
::= { tmnxPortEntry 40 }
tmnxPortNumAlarms OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alarms currently outstanding on this port."
::= { tmnxPortEntry 41 }
tmnxPortAlarmState OBJECT-TYPE
SYNTAX TmnxAlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortAlarmState indicates the current alarm
state for this port."
::= { tmnxPortEntry 42 }
tmnxPortLastAlarmEvent OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortLastAlarmEvent is an object identifier whose
object name and instance values point to the row entry in the
ALARM-MIB that contains the most recent alarm event associated with
this port. If the tmnxPortAlarmState has a value of
'alarmCleared', the most recent alarm event will be in the
nlmAlarmClearedTable. If it has a value of 'alarmActive', the
entry pointed to is in the nlmAlarmActiveTable. If the value of
tmnxPortLastAlarmEvent is '0.0', then either there have not been any
alarm events associated with this chassis since the system was
last booted, or the last alarm event has aged out and its entry is
no longer available in the ALARM-MIB tables."
::= { tmnxPortEntry 43 }
tmnxPortClearAlarms OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this action variable causes all the alarms
associated with this port to be moved from the current
alarm log to the history alarm log. Primarily meant
for use in development. This object will most likely
be removed from the MIB before product release."
DEFVAL { notApplicable }
::= { tmnxPortEntry 44 }
tmnxPortSFPVendorSerialNum OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortSFPVendorSerialNum contains ASCII characters,
defining the vendor serial number.
A value of all zero indicates that the vendor SN
is unspecified."
::= { tmnxPortEntry 45 }
tmnxPortSFPVendorPartNum OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor part number contains ASCII characters,
defining the vendor part number or product name.
A value of all zero indicates that the vendor PN
is unspecified. "
::= { tmnxPortEntry 46 }
tmnxPortLastStateChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortLastStateChanged variable contains the
value of the sysUpTime the last time the operational status
of the port changed state."
::= { tmnxPortEntry 48 }
tmnxPortNumChannels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For SONET/SDH paths or TDM channels, tmnxPortNumChannels
contains the number of possible immediate children. For
leaf paths or channels, the value of this object will be zero.
For SONET/SDH or TDM physical ports, tmnxPortNumChannels
contains the total number of channels on the physical port.
For all other entries in the tmnxPortTable, the value of
this object will be zero."
::= { tmnxPortEntry 49 }
tmnxPortNetworkEgrQueues OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxPortNetworkEgrQueues contains the network egress queue policy
if the tmnxPortMode is network. Otherwise this object has no
significance."
::= { tmnxPortEntry 50 }
tmnxPortBundleNumber OBJECT-TYPE
SYNTAX INTEGER (0..1280)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortBundleNumber identifies the bundle for which this port is
a member. If this port is not a member of any bundle, the value of
tmnxPortBundleNumber will be zero."
::= { tmnxPortEntry 51 }
tmnxPortIsLeaf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM'
bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set.
When the value of this object is 'true', it indicates that the channel
is capable of passing traffic.
The value of this object is 'false' for:
1. Physical ports on SONET/TDM MDA's
2. Intermediate channels on a channelized MDA
3. Leaf channels which belong to a bundle
For ports on Ethernet MDA's or for LAG ports, the value of this object
will be 'false'."
::= { tmnxPortEntry 52 }
tmnxPortChanType OBJECT-TYPE
SYNTAX TmnxMDAChanType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM'
bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates
the type of the channel.
For ports on Ethernet MDA's, the value of this object will
be 'unknown'."
::= { tmnxPortEntry 53 }
tmnxPortParentPortID OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortParentPortID is applicable only when the 'isSonet'
and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set.
For SONET or TDM channel, it indicates the port ID of its parent
channel or port."
::= { tmnxPortEntry 54 }
tmnxPortOpticalCompliance OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortOpticalCompliance is applicable only when the
tmnxPortSFPEquipped is set to 'true'. The value of
tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance
bits stored in SFP and XFP eeproms."
::= { tmnxPortEntry 55 }
tmnxPortLoadBalanceAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
default (1),
includeL4 (2),
excludeL4 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortLoadBalanceAlgorithm specifies the load
balancing algorithm to be used on this port. When the
value is 'includeL4', the src and dst port are used in the
hashing algorithm. When it's 'excludeL4', they are not included.
When the value is 'default', the port inherits the global settings
in tmnxL4LoadBalancing. The value is 'notApplicable' for ports that
do not pass any traffic. An attempt to modify this object when it is
set to 'notApplicable' will return an inconsistentValue error."
DEFVAL { default }
::= { tmnxPortEntry 56 }
tmnxPortEgrPortSchedPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS
port-scheduler policy for this port. This object must correspond
to the index of a row in ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable."
DEFVAL { "" }
::= { tmnxPortEntry 57 }
tmnxPortLastClearedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortLastClearedTime indicates the sysUpTime
when the counters in the IF-MIB:ifTable were last cleared."
::= { tmnxPortEntry 58 }
tmnxPortIngNamedPoolPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortIngNamedPoolPlcy specifies a named pool
policy associated with an port ingress context. The policy
governs the way named pools are created at the port level."
DEFVAL { ''H }
::= { tmnxPortEntry 60 }
tmnxPortEgrNamedPoolPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortEgrNamedPoolPlcy specifies a named pool
policy associated with an port egress context. The policy
governs the way named pools are created at the port level."
DEFVAL { ''H }
::= { tmnxPortEntry 61 }
tmnxPortIngPoolPercentRate OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortIngPoolPercentRate specifies increment or
decrement of the active bandwidth associated with the ingress port.
This active bandwidth affects the amount of ingress buffer space
managed by the port."
DEFVAL { 100 }
::= { tmnxPortEntry 62 }
tmnxPortEgrPoolPercentRate OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortEgrPoolPercentRate specifies increment or
decrement of the active bandwidth associated with the egress port.
This active bandwidth affects the amount of egress buffer space
managed by the port."
DEFVAL { 100 }
::= { tmnxPortEntry 63 }
tmnxPortDDMEventSuppression OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortDDMEventSuppression specifies whether or not an
inserted SFP/XFP that supports Digital Diagnostic Monitoring
raises traps and events (false) or suppresses all notifications
(true)."
DEFVAL { false }
::= { tmnxPortEntry 64 }
tmnxPortSFPStatus OBJECT-TYPE
SYNTAX INTEGER {
not-equipped (0),
operational (1),
read-error (2),
data-corrupt (3),
ddm-corrupt (4),
unsupported (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortSFPStatus indicates the operational status of
the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the
tmnxPortSFPStatus will be 'not-equipped (0)', otherwise
'operational (1)' if no failure is detected.
A failure to read the SFP data will result in a 'read-error (2)',
while corrupted information on the SFP will result in either
'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in
invalid data or DDM information respectively. An insertion of an
unsupported SFP will result in 'unsupported (5)'.
A trap will be raised if the value of tmnxPortSFPStatus indicates a
failure; that is the tmnxPortSFPStatus is neither 'not-equipped (0)',
nor 'operational (1)'."
DEFVAL { not-equipped }
::= { tmnxPortEntry 65 }
--
-- Port Diagnostic Table
--
tmnxPortTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPortTestTable has an entry for each port on each IOM
card in each chassis in the TMNX system."
::= { tmnxPortObjs 3 }
tmnxPortTestEntry OBJECT-TYPE
SYNTAX TmnxPortTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations."
AUGMENTS { tmnxPortEntry }
::= { tmnxPortTestTable 1 }
TmnxPortTestEntry ::=
SEQUENCE {
tmnxPortTestState INTEGER,
tmnxPortTestMode INTEGER,
tmnxPortTestParameter Unsigned32,
tmnxPortTestLastResult INTEGER,
tmnxPortTestStartTime DateAndTime,
tmnxPortTestEndTime DateAndTime,
tmnxPortTestDuration INTEGER,
tmnxPortTestAction INTEGER
}
tmnxPortTestState OBJECT-TYPE
SYNTAX INTEGER {
notInTest (1),
inTest (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current testing status of this port."
::= { tmnxPortTestEntry 1 }
tmnxPortTestMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
loopback1 (1),
loopback2 (2),
loopback3 (3),
singalInsertion (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of test to be executed on this port."
::= { tmnxPortTestEntry 2 }
tmnxPortTestParameter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A parameter to be passed to the test program."
::= { tmnxPortTestEntry 3 }
tmnxPortTestLastResult OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
success (1),
failure (2),
timeout (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last test executed on this port."
::= { tmnxPortTestEntry 4 }
tmnxPortTestStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time the test started on this port.
Returns 0 if tmnxPortTestState is notInTest."
::= { tmnxPortTestEntry 5 }
tmnxPortTestEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time the last test completed. Returns 0
if a test is in progress or no tests have yet to be run on
this port."
::= { tmnxPortTestEntry 6 }
tmnxPortTestDuration OBJECT-TYPE
SYNTAX INTEGER (0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds the port test is anticipated to last."
::= { tmnxPortTestEntry 7 }
tmnxPortTestAction OBJECT-TYPE
SYNTAX INTEGER {
none (1),
startTest (2),
stopTest (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operator sets this variable to perform the appropriate
type of testing."
::= { tmnxPortTestEntry 8 }
--
-- Ethernet Ports Table
--
tmnxPortEtherTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPortEtherTable has an entry for each Ethernet
(faste, gige, xcme or xgige) port on each IOM card in each chassis
in the TMNX system."
::= { tmnxPortObjs 4 }
tmnxPortEtherEntry OBJECT-TYPE
SYNTAX TmnxPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM card entry
can be deleted from the tmnxMDATable, its supported
tmnxPortEntry and tmnxPortEtherEntry rows must be in the proper
state for removal. The tmnxPortEtherEntry contains attributes
that are unique to the Ethernet TmnxPortType."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxPortEtherTable 1 }
TmnxPortEtherEntry ::=
SEQUENCE {
tmnxPortEtherMTU Unsigned32,
tmnxPortEtherDuplex INTEGER,
tmnxPortEtherSpeed INTEGER,
tmnxPortEtherAutoNegotiate INTEGER,
tmnxPortEtherOperDuplex INTEGER,
tmnxPortEtherOperSpeed Unsigned32,
tmnxPortEtherAcctPolicyId Unsigned32,
tmnxPortEtherCollectStats TruthValue,
tmnxPortEtherMDIMDIX INTEGER,
tmnxPortEtherXGigMode INTEGER,
tmnxPortEtherEgressRate Integer32,
tmnxPortEtherDot1qEtype Unsigned32,
tmnxPortEtherQinqEtype Unsigned32,
tmnxPortEtherIngressRate Integer32,
tmnxPortEtherReportAlarm TmnxPortEtherReportStatus,
tmnxPortEtherReportAlarmStatus TmnxPortEtherReportStatus,
tmnxPortEtherPkts1519toMax Counter32,
tmnxPortEtherHCOverPkts1519toMax Counter32,
tmnxPortEtherHCPkts1519toMax Counter64,
tmnxPortEtherLacpTunnel TruthValue,
tmnxPortEtherDownWhenLoopedEnabled TruthValue,
tmnxPortEtherDownWhenLoopedKeepAlive Unsigned32,
tmnxPortEtherDownWhenLoopedRetry Unsigned32,
tmnxPortEtherDownWhenLoopedState INTEGER,
tmnxPortEtherPBBEtype Unsigned32,
tmnxPortEtherReasonDownFlags BITS
}
tmnxPortEtherMTU OBJECT-TYPE
SYNTAX Unsigned32 (0|512..9212)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the Ethernet physical interface, specified in octets. For
interfaces that are used for transmitting network datagrams,
this is the size of the largest network datagram that can be
sent on the interface.
Setting tmnxPortEtherMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical default values are:
1514 with mode access and encap-type null
1518 with mode access and encap-type dot1q
1518 with mode access and encap-type mpls
9198 with mode network
"
::= { tmnxPortEtherEntry 1 }
tmnxPortEtherDuplex OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
fullDuplex (1),
halfDuplex (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherDuplex variable specifies the duplex mode used by
the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of
'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of
'true', the link parameters are negotiated with the far end and
the tmnxPortEtherDuplex variable is ignored. A value of 'fullDuplex'
sets the link to full duplex mode. A value of 'halfDuplex' sets
the link to half duplex mode. tmnxPortEtherDuplex is only valid on
Ethernet interfaces that support multiple duplex modes."
DEFVAL { fullDuplex }
::= { tmnxPortEtherEntry 2 }
tmnxPortEtherSpeed OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
speed10 (1),
speed100 (2),
speed1000 (3),
speed10000 (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherSpeed variable specifies the link speed of the
Ethernet interface if tmnxPortEtherAutoNegotiate has a value of
'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of
'true', the link parameters are negotiated with the far end and
the tmnxPortEtherSpeed variable is ignored. A value of 'speed10'
sets the link to 10 mbps. A value of 'speed100' sets the link to
100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps).
tmnxPortEtherSpeed is only valid on Ethernet interfaces that support
multiple link speeds."
::= { tmnxPortEtherEntry 3 }
tmnxPortEtherAutoNegotiate OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
true (1),
false (2),
limited (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet
interface will automatically negotiate link parameters with the far
end (including speed and duplex), and will advertise all speeds and
duplex modes supported by the interface. When the value of
tmnxPortEtherAutoNegotiate is 'limited', the Ethernet interface will
automatically negotiate link parameters with the far end, but will
only advertise the speed and duplex mode specified by tmnxPortEtherSpeed
and tmnxPortEtherDuplex. If tmnxPortEtherAutoNegotiate is 'false',
the Ethernet interface won't negotiate link parameters with the far
end and will instead force the speed and duplex mode to the values specified
by tmnxPortEtherSpeed and tmnxPortEtherDuplex respectively."
DEFVAL { true }
::= { tmnxPortEtherEntry 4 }
tmnxPortEtherOperDuplex OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
fullDuplex (1),
halfDuplex (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortEtherOperDuplex variable indicates the operational duplex
mode of the Ethernet interface. A value of 'fullDuplex' indicates that
the link is in full duplex mode. A value of 'halfDuplex' indicates
that the link is in half duplex mode. tmnxPortEtherOperDuplex is only
valid if tmnxPortClass is 'faste' or 'xcme'."
::= { tmnxPortEtherEntry 5 }
tmnxPortEtherOperSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "mega-bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortEtherOperSpeed variable indicates the operational speed
of the Ethernet interface in mega-bits per second (mbps). If the value of
tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link
parameters with the far end side. The value of tmnxPortEtherOperSpeed is
only valid if tmnxPortClass is one of the Ethernet classes."
::= { tmnxPortEtherEntry 6 }
tmnxPortEtherAcctPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the accounting policy must be defined prior to associating
the policy with the ethernet port. Accounting policies can only be
associated with network ports.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this port. A zero value indicates that there is no
accounting policy associated with this port"
DEFVAL { 0 }
::= { tmnxPortEtherEntry 7 }
tmnxPortEtherCollectStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the collection of accounting and statistical data
for the network ethernet port. When applying accounting policies the
data by default will be collected in the appropriate records and
written to the designated billing file.
When the value is set to false, the statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file."
DEFVAL { true }
::= { tmnxPortEtherEntry 8 }
tmnxPortEtherMDIMDIX OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
mdi (1),
mdix (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet
interface is of type 'mdi' (Media Dependent Interface) or
'mdix' (Media Dependent Interface with crossover). If the agent
cannot identify the type of Ethernet interface the value
'unknown (0)' is indicated. tmnxPortEtherMDIMDIX is only valid if
tmnxPortClass is 'faste' or 'xcme'."
::= { tmnxPortEtherEntry 9 }
tmnxPortEtherXGigMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
lan (1),
wan (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherXGigMode variable specifies whether the Ethernet
interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be
'notApplicable' if tmnxPortClass is not 'xgige'."
DEFVAL { lan }
::= { tmnxPortEtherEntry 10 }
tmnxPortEtherEgressRate OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherEgressRate variable specifies the maximum egress
bandwidth (in kilobits per second) that the Ethernet interface
can generate. A value of -1 means that the limit is the actual
physical limit. If the provisioned sub-rate bandwidth is larger than
the actual physical bandwidth of the interface, the latter applies."
DEFVAL { -1 }
::= { tmnxPortEtherEntry 11 }
tmnxPortEtherDot1qEtype OBJECT-TYPE
SYNTAX Unsigned32 ('600'H..'ffff'H)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherDot1qEtype variable indicates the ethertype expected
when the port's encapsulation type is dot1qEncap."
DEFVAL { '8100'H }
::= { tmnxPortEtherEntry 12 }
tmnxPortEtherQinqEtype OBJECT-TYPE
SYNTAX Unsigned32 ('600'H..'ffff'H)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherQinqEtype variable indicates the ethertype expected
when the port's encapsulation type is qinqEncap."
DEFVAL { '8100'H }
::= { tmnxPortEtherEntry 13 }
tmnxPortEtherIngressRate OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..10000)
UNITS "mega-bits per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherIngressRate variable specifies the maximum ingress
bandwidth (in mega-bits per second) that the Ethernet interface
can receive. A value of -1 means that the limit is the actual
physical limit. If the provisioned sub-rate bandwidth is larger than
the actual physical bandwidth of the interface, the latter applies."
DEFVAL { -1 }
::= { tmnxPortEtherEntry 14 }
tmnxPortEtherReportAlarm OBJECT-TYPE
SYNTAX TmnxPortEtherReportStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortEtherReportAlarm determines when and if to
generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear."
DEFVAL { { remoteFault, localFault } }
::= { tmnxPortEtherEntry 15 }
tmnxPortEtherReportAlarmStatus OBJECT-TYPE
SYNTAX TmnxPortEtherReportStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortEtherReportAlarmStatus indicates the alarms on
this port."
::= { tmnxPortEtherEntry 16 }
tmnxPortEtherPkts1519toMax OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received that were longer than 1518 octets
but less than the maximum frame size for the particular medium, usually
12287 octets (excluding framing bits, but including FCS octets) and were
otherwise well formed."
::= { tmnxPortEtherEntry 17 }
tmnxPortEtherHCOverPkts1519toMax OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated tmnxPortEtherPkts1519toMax
counter has overflowed."
::= { tmnxPortEtherEntry 18 }
tmnxPortEtherHCPkts1519toMax OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad packets) received that were
between 1519 octets in length and the maximum frame size, usually 12287
octets inclusive (excluding framing bits but including FCS octets).
The lower 32-bits of this 64-bit counter will equal the value of
tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will
equal the value of tmnxPortEtherHCOverPkts1519toMax."
::= { tmnxPortEtherEntry 19 }
tmnxPortEtherLacpTunnel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortEtherLacpTunnel specifies whether the LACP
packet tunneling for the ethernet port is enabled or disabled.
When tunneling is enabled, the port will not process any LACP
packets but will tunnel them through instead. Also, the port
cannot be added as a member to a LAG group, and vice versa."
DEFVAL { false }
::= { tmnxPortEtherEntry 20 }
tmnxPortEtherDownWhenLoopedEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether
physical loop detection for the Ethernet port is enabled or
disabled. When enabled, the port will periodically send out
keep-alive PDUs with an EtherType of 0x9000. If the port
receives a keep-alive that it transmitted, tmnxPortState will be
set to 'linkUp' if it was previously 'up'. The port will not move
back to tmnxPortState 'up' for a period of time defined by
tmnxPortEtherDownWhenLoopedRetry, but will continue to periodically
send out keep-alive PDUs. Every time the port receives a keep alive
it sent while a loop has been detected, it will reset the time
period that it will remain down as defined by
tmnxPortEtherDownWhenLoopedRetry."
DEFVAL { false }
::= { tmnxPortEtherEntry 21 }
tmnxPortEtherDownWhenLoopedKeepAlive OBJECT-TYPE
SYNTAX Unsigned32 (1..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the
number of seconds between each keep alive PDU transmission."
DEFVAL { 10 }
::= { tmnxPortEtherEntry 22 }
tmnxPortEtherDownWhenLoopedRetry OBJECT-TYPE
SYNTAX Unsigned32 (0|10..160)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum
number of seconds the port should wait after detecting a loop before
tmnxPortState can be set to 'up'. A value of 0 specifies the the
port should not set tmnxPortState to 'up' until the user
administratively disables and re-enables the port by setting
tmnxPortAdminStatus to 'outOfService' and then to 'inService'."
DEFVAL { 120 }
::= { tmnxPortEtherEntry 23 }
tmnxPortEtherDownWhenLoopedState OBJECT-TYPE
SYNTAX INTEGER {
noLoopDetected (1),
loopDetected (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortEtherDownWhenLoopedState indicates whether
a physical loop has been detected on the port or not. If
tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value
will be 'noLoopDetected'."
::= { tmnxPortEtherEntry 24 }
tmnxPortEtherPBBEtype OBJECT-TYPE
SYNTAX Unsigned32 ('600'H..'ffff'H)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxPortEtherPBBEtype variable indicates the Ethertype expected
for Provider Backbone Bridging Frames."
DEFVAL { '88E7'H }
::= { tmnxPortEtherEntry 25 }
tmnxPortEtherReasonDownFlags OBJECT-TYPE
SYNTAX BITS {
unknown (0),
linklossFwd (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxPortEtherReasonDownFlags indicates why an ethernet port may
be in the operationally 'down' state. The following reasons are
detected through this object:
unknown(0) - Unspecified (or unknown)
linklossFwd(1) - A sap using this port has the object
'sapEthernetLLFOperStatus' set to 'fault'"
::= { tmnxPortEtherEntry 26 }
--
-- Sonet Ports Table
--
tmnxSonetTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxSonetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxSonetTable has an entry for each packet over Sonet
port on each IOM card in each chassis in the TMNX system."
::= { tmnxPortObjs 5 }
tmnxSonetEntry OBJECT-TYPE
SYNTAX TmnxSonetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a packet over Sonet port on a
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Before an IOM
tmnxMDAEntry can be deleted from the tmnxMDATable, its
supported tmnxPortEntry rows must be in the proper state for
removal. The tmnxSonetEntry contains attributes that are
unique to the 'sonet' TmnxPortType. It also contains attributes
that are common to all sonet paths configured on a sonet port.
The tmnxPortPortID for a sonet port includes a sonet path number
in the lower bits. If the sonet path number is zero, '0', it
represents a single (clear) sonet path on the port that uses
the full bandwidth of the sonet port. All entries in this table
have the sonet path number part of their tmnxPortPortID index
value set to zero."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxSonetTable 1 }
TmnxSonetEntry ::=
SEQUENCE {
tmnxSonetSpeed INTEGER,
tmnxSonetClockSource INTEGER,
tmnxSonetFraming INTEGER,
tmnxSonetReportAlarm BITS,
tmnxSonetBerSdThreshold Unsigned32,
tmnxSonetBerSfThreshold Unsigned32,
tmnxSonetAps TruthValue,
tmnxSonetApsAdminStatus TmnxPortAdminStatus,
tmnxSonetApsOperStatus TmnxPortOperStatus,
tmnxSonetApsAuthKey OCTET STRING,
tmnxSonetApsNeighborAddr IpAddress,
tmnxSonetApsAdvertiseInterval TimeInterval,
tmnxSonetApsAdvertiseTimeLeft TimeInterval,
tmnxSonetApsHoldTime TimeInterval,
tmnxSonetApsHoldTimeLeft TimeInterval,
tmnxSonetLoopback INTEGER,
tmnxSonetReportAlarmStatus BITS,
tmnxSonetSectionTraceMode INTEGER,
tmnxSonetJ0String OCTET STRING,
tmnxSonetMonS1Byte Unsigned32,
tmnxSonetMonJ0String OCTET STRING,
tmnxSonetMonK1Byte Unsigned32,
tmnxSonetMonK2Byte Unsigned32,
tmnxSonetSingleFiber TruthValue,
tmnxSonetHoldTimeUp Unsigned32,
tmnxSonetHoldTimeDown Unsigned32
}
tmnxSonetSpeed OBJECT-TYPE
SYNTAX INTEGER {
oc3 (1),
oc12 (2),
oc48 (3),
oc192 (4),
oc768 (5),
oc1 (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate of this optical facility."
::= { tmnxSonetEntry 1 }
tmnxSonetClockSource OBJECT-TYPE
SYNTAX INTEGER {
loopTimed (1),
nodeTimed (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxSonetClockSource configures the clock for transmitted data from
either the internal clock ('nodeTimed') or from a clock recovered
from the line's receive data stream ('loopTimed')."
DEFVAL { loopTimed }
::= { tmnxSonetEntry 2 }
tmnxSonetFraming OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
sonet (2),
sdh (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxSonetFraming indicates the type of framing used
on this interface."
DEFVAL { sonet }
::= { tmnxSonetEntry 3 }
tmnxSonetReportAlarm OBJECT-TYPE
SYNTAX BITS {
notUsed (0),
loc(1),
lais(2),
lrdi(3),
ss1f(4),
sb1err(5),
lb2erSd(6),
lb2erSf(7),
slof(8),
slos(9),
stxptr(10),
srxptr(11),
lrei(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxSonetReportAlarm determines when and if to
generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear
notifications for this port:
loc(1) Reports a loss of clock which causes the operational
state of the port to be downed. Set by default.
lais(2) Reports line alarm indication signal errors. Not set
by default.
lrdi(3) Reports line remote defect initiation errors. LRDIs
are caused by remote LOF, LOC, and LOS. Set by default.
ss1f(4) Reports section synchronization failure as reported by
the S1 byte. Not set by default.
sb1err(5) Reports section B1 errors. Not set by default.
lb2erSd(6) Reports line signal degradation BER errors. Not set
by default.
lb2erSf(7) Reports line signal failure BER errors. Set by default.
slof(8) Reports section loss of frame errors. Set by default
slos(9) Reports section loss of signal errors. Set by default.
stxptr(10) Reports a section synchronization error on the transmit
side. Indicates if there is a positive or negative
justification count per channel. Not set by default.
srxptr(11) Reports a section synchronization error on the receive
side. Indicates if there is a positive or negative
justification count per path. Not set by default.
lrei(12) Reports a line error condition raised by the remote
as a result of B1 errors received from this node.
Not set by default.
"
DEFVAL { {loc, lrdi, lb2erSf, slof, slos} }
::= { tmnxSonetEntry 4 }
tmnxSonetBerSdThreshold OBJECT-TYPE
SYNTAX Unsigned32 (3..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortSonetAlarm
notification for a BER SD failure and tmnxEqPortSonetAlarmClear
notification for a BER SD failure clear. tmnxSonetBerSdThreshold is
the absolute value of the exponent of the rate expressed as 10e-n."
DEFVAL { 6 }
::= { tmnxSonetEntry 5 }
tmnxSonetBerSfThreshold OBJECT-TYPE
SYNTAX Unsigned32 (3..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortSonetAlarm
notification for a BER SF failure and tmnxEqPortSonetAlarmClear
notification for a BER SF failure clear. tmnxSonetBerSdThreshold is
the absolute value of the exponent of the rate expressed as 10e-n."
DEFVAL { 3 }
::= { tmnxSonetEntry 6 }
tmnxSonetAps OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
DEFVAL { false }
::= { tmnxSonetEntry 7 }
tmnxSonetApsAdminStatus OBJECT-TYPE
SYNTAX TmnxPortAdminStatus
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
DEFVAL { inService }
::= { tmnxSonetEntry 8 }
tmnxSonetApsOperStatus OBJECT-TYPE
SYNTAX TmnxPortOperStatus
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
::= { tmnxSonetEntry 9 }
tmnxSonetApsAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
DEFVAL { '0000000000000000'H }
::= { tmnxSonetEntry 10 }
tmnxSonetApsNeighborAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
DEFVAL { '00000000'H }
::= { tmnxSonetEntry 11 }
tmnxSonetApsAdvertiseInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
DEFVAL { 1000 }
::= { tmnxSonetEntry 12 }
tmnxSonetApsAdvertiseTimeLeft OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
::= { tmnxSonetEntry 13 }
tmnxSonetApsHoldTime OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
DEFVAL { 3000 }
::= { tmnxSonetEntry 14 }
tmnxSonetApsHoldTimeLeft OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Automatic Protection Switching (APS) is supported on 7x50 systems
by the APS-MIB and TIMETRA-APS-MIB."
::= { tmnxSonetEntry 15 }
tmnxSonetLoopback OBJECT-TYPE
SYNTAX INTEGER {
none(0),
line(1),
internal(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activate a loopback on the SONET port. The SONET port must be in a
shutdown state to activate any type of loopback."
::= { tmnxSonetEntry 16 }
tmnxSonetReportAlarmStatus OBJECT-TYPE
SYNTAX BITS {
notUsed (0),
loc(1),
lais(2),
lrdi(3),
ss1f(4),
sb1err(5),
lb2erSd(6),
lb2erSf(7),
slof(8),
slos(9),
stxptr(10),
srxptr(11),
lrei(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits in this object are used for indicating the alarms. The bits
are explained as follows:
loc(1) Indicates a loss of clock which causes the operational
state of the port to be downed.
lais(2) Indicates line alarm indication signal errors.
lrdi(3) Indicates line remote defect indication errors. LRDIs
are caused by remote LOF, LOC, and LOS.
ss1f(4) Indicates section synchronization failure as reported by
the S1 byte.
sb1err(5) Indicates section B1 errors.
lb2erSd(6) Indicates line signal degradation BER errors.
lb2erSf(7) Indicates line signal failure BER errors.
slof(8) Indicates section loss of frame errors.
slos(9) Indicates section loss of signal errors.
stxptr(10) Indicates a section synchronization error on the
transmit side. Indicates if there is a positive or
negative justification count per channel.
srxptr(11) Indicates a section synchronization error on the receive
side. Indicates if there is a positive or negative
justification count per sonet path.
lrei(12) Indicates a line error condition raised by the remote
as a result of B1 errors received from this node.
"
::= { tmnxSonetEntry 17 }
tmnxSonetSectionTraceMode OBJECT-TYPE
SYNTAX INTEGER {
increment-z0(1),
byte(2),
string(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxSonetSectionTraceMode variable along with the
tmnxSonetJ0String object determines the contents of
the section trace bytes (j0/z0) in the SONET Section Header. If the
mode is set to 'increment-z0', then the j0 byte is 0x01, and the
z0 byte increments. If the mode is set to 'byte', then the j0 byte is
the first octet of the tmnxSonetJ0String object and the z0 byte
is 0xcc. If the mode is set to 'string', then the J0 byte is set to
the 16 values in the tmnxSonetJ0String object and the z0 byte is
0xcc."
DEFVAL { byte }
::= { tmnxSonetEntry 18 }
tmnxSonetJ0String OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode
variable to determine the contents of the j0 byte in the SONET Section
Header. If the tmnxSonetSectionTraceMode is increment-z0, this object
is ignored. If the mode is byte, then the first octet of this object is
used for the J0 byte. If the mode is string, then the 16 bytes in this
object are used for the J0 byte. If set to less than 16 bytes it, will
be padded out to 16 with zeros. The default value is 0x01 and 15 NULLs"
DEFVAL { '01'H }
::= { tmnxSonetEntry 19 }
tmnxSonetMonS1Byte OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetMonS1Byte variable reports the Synchronization Status
Message from the S1 byte in the Line Overhead Header. A value of 0x00
indicates unknown quality. A value of 0xF0 indicates
`Do not use for synchronization`. Other values are documented in
Tellcordia GR253 and ITU G.707"
DEFVAL { 'cc'H }
::= { tmnxSonetEntry 20 }
tmnxSonetMonJ0String OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetMonJ0String variable reports the contents of the j0 byte
in the SONET Section Header."
::= { tmnxSonetEntry 21 }
tmnxSonetMonK1Byte OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetMonK1Byte variable reports the Automatic Protection
Switching(APS) signalling status from the K1 byte in the SONET
Line Overhead Header."
::= { tmnxSonetEntry 22 }
tmnxSonetMonK2Byte OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetMonK1Byte variable reports the Automatic Protection
Switching(APS) signalling status from the K2 byte in the SONET
Line Overhead Header."
::= { tmnxSonetEntry 23 }
tmnxSonetSingleFiber OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxSonetSingleFiber is used to enable/disable packet gathering and
redirection of IP packets from a single fiber on RX port of the
SONET interface and redistribute packets to other interfaces
through either state routes or policy-based forwarding."
DEFVAL { false }
::= { tmnxSonetEntry 24 }
tmnxSonetHoldTimeUp OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "100s of milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxSonetHoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that an up transition is reported
immediately."
DEFVAL { 5 }
::= { tmnxSonetEntry 25 }
tmnxSonetHoldTimeDown OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "100s of milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxSonetHoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transitions of the interface to
upper layer protocols until the configured timer has expired.
A value of zero (0) indicates that a down transition is reported
immediately."
DEFVAL { 0 }
::= { tmnxSonetEntry 26 }
--
-- Sonet Path Table
--
tmnxSonetPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxSonetPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxSonetPathTable has an entry for each sonet path
configured in each packet over Sonet port on each IOM card
in each chassis in the TMNX system."
::= { tmnxPortObjs 6 }
tmnxSonetPathEntry OBJECT-TYPE
SYNTAX TmnxSonetPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a configured sonet path in a packet
over Sonet port on a IOM card in a chassis in the system.
The tmnxSonetPathEntry contains attributes that are
unique to a sonet path of a 'sonet' TmnxPortType. The
tmnxPortPortID for a sonet port includes a sonet path number
in the lower bits. If the sonet path number is zero, '0', it
represents a single (clear) sonet path on the port that uses
the full bandwidth of the sonet port. Entries in this table
that have the sonet path number part of their tmnxPortPortID
index value set to zero cannot be created and deleted via
SNMP SET operations. They are created by the SNMP agent
when the corresponding entry in the tmnxSonetTable is
created.
Entries with non-zero sonet path numbers can be created and
deleted via SNMP SET operations using tmnxSonetPathRowStatus.
When a row is created in the tmnxSonetPathTable, the
agent also creates a row with the same index values in the
tmnxPortTable. In order to delete an entry,
tmnxPortAdminStatus must first be set to 'outOfService'. When
the tmnxSonetPathEntry is deleted, the agent also deletes
the corresponding row in the tmnxPortTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxSonetPathTable 1 }
TmnxSonetPathEntry ::=
SEQUENCE {
tmnxSonetPathRowStatus RowStatus,
tmnxSonetPathLastChangeTime TimeStamp,
tmnxSonetPathMTU Unsigned32,
tmnxSonetPathScramble TruthValue,
tmnxSonetPathC2Byte Unsigned32,
tmnxSonetPathJ1String OCTET STRING,
tmnxSonetPathCRC INTEGER,
tmnxSonetPathOperMTU Unsigned32,
tmnxSonetPathOperMRU Unsigned32,
tmnxSonetPathReportAlarm BITS,
tmnxSonetPathAcctPolicyId Unsigned32,
tmnxSonetPathCollectStats TruthValue,
tmnxSonetPathReportAlarmStatus BITS,
tmnxSonetPathMonC2Byte Unsigned32,
tmnxSonetPathMonJ1String OCTET STRING,
tmnxSonetPathType INTEGER,
tmnxSonetPathChildType TmnxMDAChanType
}
tmnxSonetPathRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxSonetPathRowStatus controls the creation and deletion of
row entries in the tmnxSonetPathTable. The tmnxPortPortID
for a sonet port includes a sonet path number in the lower bits.
If the sonet path number is zero, '0', it represents a single
(clear) sonet path on the port that uses the full bandwidth of
the sonet port. Entries in this table that have the sonet path
number part of their tmnxPortPortID index value set to zero
cannot be created and deleted via SNMP SET operations. They
are created by the SNMP agent when the corresponding entry in
the tmnxSonetTable is created.
Entries with non-zero sonet path numbers can be created and deleted
via SNMP SET operations. When a row is created in the
tmnxSonetPathTable, the agent also creates a row with the
same index values in the tmnxPortTable. In order to delete an
entry, tmnxPortAdminStatus must first be set to 'outOfService'.
When the tmnxSonetPathEntry is deleted, the agent also
deletes the corresponding row in the tmnxPortTable for this
sonet path port."
::= { tmnxSonetPathEntry 1 }
tmnxSonetPathLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetPathLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxSonetPathEntry row for this sonet path."
::= { tmnxSonetPathEntry 2 }
tmnxSonetPathMTU OBJECT-TYPE
SYNTAX Unsigned32 (0|512..9208)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the sonet path, specified in octets. For paths that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent on the
sonet path.
Setting tmnxSonetPathMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical default values are:
1522 with mode access and encap-type bcp-null
1526 with mode access and encap-type bcp-dot1q
1502 with mode access and encap-type ipcp
1506 with mode access and encap-type mplscp
1524 with mode access and encap-type atm
9208 with mode network
"
::= { tmnxSonetPathEntry 3 }
tmnxSonetPathScramble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the tmnxSonetPathScramble variable is set to 'true',
SONET (SDH) payload scrambling is enabled on this sonet path.
Both ends of the connection must use the same scrambling
algorithm. If tmnxSonetPathScramble is set to 'false',
scrambling is disabled.
The default value for non-ATM paths is 'false'.
The default value for ATM paths is 'true'
If the value of tmnxSonetPathC2Byte is set to the default for
the currently configured tmnxSonetPathScramble, then changing
the value of tmnxSonetPathScramble for non-ATM paths causes a change
to tmnxSonetPathC2Byte to a default value for a new scrambling
option. The default values are as follows:
scrambled non-ATM sonet/sdh path - C2 Byte value is 0x16
unscrambled non-ATM sonet/sdh path - C2 Byte value is 0xCF"
::= { tmnxSonetPathEntry 4 }
tmnxSonetPathC2Byte OBJECT-TYPE
SYNTAX Unsigned32 (0..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tmnxSonetPathC2Byte variable is used configure the value
used in the SONET/SDH C2 header byte.
For paths on an MDA that does not support channelization:
Setting C2 equal to 0x16 indicates scrambled sonet.
Setting C2 equal to 0xCF indicates unscrambled sonet.
Setting C2 equal to 0x13 indicates ATM.
For paths on an MDA that supports channelization, the default
value is based on the value of tmnxMDAMaxChannelization.
For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04.
Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent
to assign the default value to this object."
::= { tmnxSonetPathEntry 5 }
tmnxSonetPathJ1String OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..62))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tmnxSonetPathJ1String variable is used to configure the sonet path
trace string to be sent in the J1 Path Overhead bytes. The bytes
must be printable ASCII. If the string is less than 62 bytes, it
will be padded with NULLs. For SONET framing, an additional CR (0x0D)
/ LF (0x0A) pair will be added by the driver. For SDH framing only
16 bytes are sent in the J1 bytes. The driver will set the MSB of
the first byte, and put the first 15 bytes of the user configured string
as the following bytes. The driver will set the CRC-7 of the 16 bytes
into the other 7 bits of the first byte.
The default value is `Alcatel 7x50 SR`.
Setting a 1-byte long string containing 0xFF will restore the default.
Setting the string 'zeros' will send all-zeros (ASCII NULL characters
without CR/LF or CRC-7)in the J1 bytes."
::= { tmnxSonetPathEntry 6 }
tmnxSonetPathCRC OBJECT-TYPE
SYNTAX INTEGER {
crc16 (1),
crc32 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxSonetPathCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead.
For paths with encapsulation set to ATM the default and only
supported value is crc32 and applies to AAL5 CRC calculations
on that path."
DEFVAL { crc32 }
::= { tmnxSonetPathEntry 7 }
tmnxSonetPathOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet which can be sent on
the sonet path, specified in octets. For sonet paths that are used
for transmitting network datagrams, this is the size of the largest
network datagram that can be sent on the sonet path."
::= { tmnxSonetPathEntry 8 }
tmnxSonetPathOperMRU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet that can be received
on the sonet path, specified in octets."
::= { tmnxSonetPathEntry 9 }
tmnxSonetPathReportAlarm OBJECT-TYPE
SYNTAX BITS {
notUsed (0),
pais(1),
plop(2),
prdi(3),
pb3err(4),
pplm(5),
prei(6),
puneq(7),
plcd(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxSonetPathReportAlarm determines when and if to
generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear
notifications for this port:
pais(1) Reports path alarm indication signal errors. Not set by
default.
plop(2) Reports path loss of pointer (per tributary) errors.
Set by default.
prdi(3) Reports path remote defect indication errors. Not set
by default.
pb3err(4) Reports path B3 errors. Not set by default.
pplm(5) Reports a path payload mismatch. As a result the
path will be operationally downed. Set by default.
prei(6) Reports a path error condition raised by the remote as
a result of B3 errors received from this node. Not
set by default.
puneq(7) Reports unequipped path errors. Set by default.
plcd(8) Reports path loss of codegroup delineation error.
It is applicable only when the value of
tmnxPortEtherXGigMode is set to 'wan'.
Not set by default.
"
DEFVAL { {plop, pplm, puneq} }
::= { tmnxSonetPathEntry 10 }
tmnxSonetPathAcctPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the accounting policy must be defined prior to associating
the policy with the sonet path. Accounting policies can only be
associated with network sonet path.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this port. A zero value indicates that there is no
accounting policy associated with this port"
DEFVAL { 0 }
::= { tmnxSonetPathEntry 11 }
tmnxSonetPathCollectStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable the collection of accounting and statistical data
for the network sonet path. When applying accounting policies the
data by default will be collected in the appropriate records and
written to the designated billing file.
When the value is set to false, the statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file."
DEFVAL { true }
::= { tmnxSonetPathEntry 12 }
tmnxSonetPathReportAlarmStatus OBJECT-TYPE
SYNTAX BITS {
notUsed (0),
pais(1),
plop(2),
prdi(3),
pb3err(4),
pplm(5),
prei(6),
puneq(7),
plcd(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits in this object are used for indicating the alarms. The bits
are explained as follows:
pais(1) Indicates path alarm indication signal errors.
plop(2) Indicates path loss of pointer (per tributary) errors.
prdi(3) Indicates path remote defect indication errors.
pb3err(4) Indicates path B3 errors.
pplm(5) Indicates a path payload mismatch.
prei(6) Indicates a path error condition raised by the remote as
a result of B3 errors received from this node.
puneq(7) Indicates a far-end unequipped error.
plcd(8) Indicates a path loss of codegroup delineation error.
It is applicable only when the value of
tmnxPortEtherXGigMode is set to 'wan'.
Not set by default.
"
::= { tmnxSonetPathEntry 13 }
tmnxSonetPathMonC2Byte OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH
C2 header byte."
::= { tmnxSonetPathEntry 14 }
tmnxSonetPathMonJ1String OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxSonetPathJ1String variable reports the sonet path
trace string received in the J1 Path Overhead bytes."
::= { tmnxSonetPathEntry 15 }
tmnxSonetPathType OBJECT-TYPE
SYNTAX INTEGER {
ds3 (1),
e3 (2),
vtg (3),
tug-2 (4),
tug-3 (5)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"tmnxSonetPathType specifies if the associated SONET/SDH Path
is an asynchronous circuit, a virtual tributary group or
a tributary unit group.
ds3 - Configures the port or channel as service access(ds3)
e3 - Configures the port or channel as service access(e3)
vtg - Configures the path as a virtual tributary group.
tug-2 - Configures the path as a tributary unit group.
tug-3 - Configures the port or channel for transport network use."
DEFVAL { ds3 }
::= { tmnxSonetPathEntry 16 }
tmnxSonetPathChildType OBJECT-TYPE
SYNTAX TmnxMDAChanType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxSonetPathChildType is used to configure the type of this path.
Some typical default values are:
pdhDs3 for STS-1 paths
pdhE3 for TU3 paths
pdhE1 for VT2 paths
pdhDs1 for VT15 paths
Examples of valid child path types are sonetSts3, sdhTug3,
pdhDs3, pdhE3, sonetVt15, sonetVt2, pdhDs1 and pdhE1."
::= { tmnxSonetPathEntry 17 }
--
-- Alcatel 7x50 SR series Port Type Definition Table
--
tmnxPortTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port type table has an entry for each Alcatel 7x50 SR series
port model."
::= { tmnxPortObjs 7 }
tmnxPortTypeEntry OBJECT-TYPE
SYNTAX TmnxPortTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an Alcatel 7x50 SR series port model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests."
INDEX { tmnxPortTypeIndex }
::= { tmnxPortTypeTable 1 }
TmnxPortTypeEntry ::=
SEQUENCE {
tmnxPortTypeIndex TmnxPortType,
tmnxPortTypeName TNamedItemOrEmpty,
tmnxPortTypeDescription TItemDescription,
tmnxPortTypeStatus TruthValue
}
tmnxPortTypeIndex OBJECT-TYPE
SYNTAX TmnxPortType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index value which identifies this type of Alcatel 7x50
SR series port model."
::= { tmnxPortTypeEntry 1 }
tmnxPortTypeName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative name that identifies this type of Alcatel
7x50 SR series port model. This name string may be used in CLI
commands to specify a particular Port model type."
::= { tmnxPortTypeEntry 2 }
tmnxPortTypeDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A detailed description of this Alcatel 7x50 SR series port model."
::= { tmnxPortTypeEntry 3 }
tmnxPortTypeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When tmnxPortTypeStatus has a value of 'true' it indicates that
this port model is supported in this revision of the management
software. When it has a value of 'false' there is no support."
::= { tmnxPortTypeEntry 4 }
--
-- Alcatel 7x50 SR series Port Connector Type Definition Table
--
tmnxPortConnectTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortConnectTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Connector type table has an entry for each Alcatel
7x50 SR series port connector model."
::= { tmnxPortObjs 8 }
tmnxPortConnectTypeEntry OBJECT-TYPE
SYNTAX TmnxPortConnectTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an Alcatel 7x50 SR series port
Connector model. Rows in this table are created by the agent
at initialization and cannot be created or destroyed by SNMP
Get or Set requests."
INDEX { tmnxPortConnectTypeIndex }
::= { tmnxPortConnectTypeTable 1 }
TmnxPortConnectTypeEntry ::=
SEQUENCE {
tmnxPortConnectTypeIndex TmnxPortConnectorType,
tmnxPortConnectTypeName TNamedItemOrEmpty,
tmnxPortConnectTypeDescription TItemDescription,
tmnxPortConnectTypeStatus TruthValue
}
tmnxPortConnectTypeIndex OBJECT-TYPE
SYNTAX TmnxPortConnectorType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index value which identifies this type of Alcatel
7x50 SR series port connector model."
::= { tmnxPortConnectTypeEntry 1 }
tmnxPortConnectTypeName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative name that identifies this type of Alcatel
7x50 SR series port connector model. This name string may be
used in CLI commands to specify a particular port connector
model type."
::= { tmnxPortConnectTypeEntry 2 }
tmnxPortConnectTypeDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A detailed description of this Alcatel 7x50 SR series port
connector model."
::= { tmnxPortConnectTypeEntry 3 }
tmnxPortConnectTypeStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When tmnxPortConnectTypeStatus has a value of 'true' it indicates that
this port connector model is supported in this revision of the
chassis management software. When it has a value of 'false' there
is no support."
::= { tmnxPortConnectTypeEntry 4 }
--
-- Network Port FC Stats Table
--
tmnxPortFCStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortNetworkFCStatsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The Network Port FC Stats table has an entry for each forwarding
class defined on each network port."
::= { tmnxPortObjs 9 }
tmnxPortFCStatsEntry OBJECT-TYPE
SYNTAX TmnxPortNetworkFCStatsEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Each row entry represents a set of ingress and egress packet and
octet statistics for the given network port and forwarding class.
Rows in this table are created by the agent when the network port
is provisioned and cannot be created or destroyed by SNMP Get or
Set requests."
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxPortFCStatsIndex }
::= { tmnxPortFCStatsTable 1 }
TmnxPortNetworkFCStatsEntry ::=
SEQUENCE {
tmnxPortFCStatsIndex TFCName,
tmnxPortFCStatsIngFwdInProfPkts Counter64,
tmnxPortFCStatsIngFwdOutProfPkts Counter64,
tmnxPortFCStatsIngFwdInProfOcts Counter64,
tmnxPortFCStatsIngFwdOutProfOcts Counter64,
tmnxPortFCStatsIngDroInProfPkts Counter64,
tmnxPortFCStatsIngDroOutProfPkts Counter64,
tmnxPortFCStatsIngDroInProfOcts Counter64,
tmnxPortFCStatsIngDroOutProfOcts Counter64,
tmnxPortFCStatsEgrFwdInProfPkts Counter64,
tmnxPortFCStatsEgrFwdOutProfPkts Counter64,
tmnxPortFCStatsEgrFwdInProfOcts Counter64,
tmnxPortFCStatsEgrFwdOutProfOcts Counter64,
tmnxPortFCStatsEgrDroInProfPkts Counter64,
tmnxPortFCStatsEgrDroOutProfPkts Counter64,
tmnxPortFCStatsEgrDroInProfOcts Counter64,
tmnxPortFCStatsEgrDroOutProfOcts Counter64
}
tmnxPortFCStatsIndex OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The forwarding class associated with these stats
on this network port."
::= { tmnxPortFCStatsEntry 1 }
tmnxPortFCStatsIngFwdInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile packets (rate below CIR)
forwarded by the ingress Qchip."
::= { tmnxPortFCStatsEntry 2 }
tmnxPortFCStatsIngFwdOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile packets (rate above CIR)
forwarded by the ingress Qchip."
::= { tmnxPortFCStatsEntry 3 }
tmnxPortFCStatsIngFwdInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile octets (rate below CIR)
forwarded by the ingress Qchip."
::= { tmnxPortFCStatsEntry 4 }
tmnxPortFCStatsIngFwdOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile octets (rate above CIR)
forwarded by the ingress Qchip."
::= { tmnxPortFCStatsEntry 5 }
tmnxPortFCStatsIngDroInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile packets (rate below CIR)
dropped by the ingress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 6 }
tmnxPortFCStatsIngDroOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile packets (rate above CIR)
dropped by the ingress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 7 }
tmnxPortFCStatsIngDroInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile octets (rate below CIR)
dropped by the ingress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 8 }
tmnxPortFCStatsIngDroOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile octets (rate above CIR)
dropped by the ingress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 9 }
tmnxPortFCStatsEgrFwdInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile packets (rate below CIR)
forwarded by the egress Qchip."
::= { tmnxPortFCStatsEntry 10 }
tmnxPortFCStatsEgrFwdOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile packets (rate above CIR)
forwarded by the egress Qchip."
::= { tmnxPortFCStatsEntry 11 }
tmnxPortFCStatsEgrFwdInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile octets (rate below CIR)
forwarded by the egress Qchip."
::= { tmnxPortFCStatsEntry 12 }
tmnxPortFCStatsEgrFwdOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile octets (rate above CIR)
forwarded by the egress Qchip."
::= { tmnxPortFCStatsEntry 13 }
tmnxPortFCStatsEgrDroInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile packets (rate below CIR)
dropped by the egress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 14 }
tmnxPortFCStatsEgrDroOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile packets (rate above CIR)
dropped by the egress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 15 }
tmnxPortFCStatsEgrDroInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of in-profile octets (rate below CIR)
dropped by the egress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 16 }
tmnxPortFCStatsEgrDroOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of out-of-profile octets (rate above CIR)
dropped by the egress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc."
::= { tmnxPortFCStatsEntry 17 }
--
-- DS3 table
--
tmnxDS3Table OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDS3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDS3Table has an entry for a DS3 physical port."
::= { tmnxPortObjs 10 }
tmnxDS3Entry OBJECT-TYPE
SYNTAX TmnxDS3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical DS3 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to the DS3 MDA type The tmnxDS3Entry contains attributes that are
unique to the 'ds3e3' TmnxPortType. The tmnxPortPortID contains
the slot, mda and port numbers encoded into it.
For each tmnxDS3Entry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxDS3Table 1 }
TmnxDS3Entry ::=
SEQUENCE {
tmnxDS3Buildout INTEGER,
tmnxDS3LastChangeTime TimeStamp,
tmnxDS3Type INTEGER
}
tmnxDS3Buildout OBJECT-TYPE
SYNTAX INTEGER {
short (1),
long (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3Buildout configures the T3 line buildout. A T3 port has two
settings for the T3 line buildout: a short setting, which is less
than 225 feet, and a long setting, which is greater than 225 feet.
This object applies to copper-cable-based T3 ports only."
DEFVAL { short }
::= { tmnxDS3Entry 1 }
tmnxDS3LastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxDS3LastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS3Entry row for this port."
::= { tmnxDS3Entry 2 }
tmnxDS3Type OBJECT-TYPE
SYNTAX INTEGER {
ds3(1),
e3(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'."
DEFVAL { ds3 }
::= { tmnxDS3Entry 3 }
--
-- DS3 Channel table
--
tmnxDS3ChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDS3ChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDS3ChannelTable has an entry for a DS3 channel."
::= { tmnxPortObjs 11 }
tmnxDS3ChannelEntry OBJECT-TYPE
SYNTAX TmnxDS3ChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a DS3 channel. Entries can be created
and deleted via SNMP SET operations. The tmnxDS3ChannelEntry
contains attributes that are applicable to a DS3 channel which
can belong to the DS3 physical port or belong to a container
on a sonet path. The tmnxPortPortID contains the slot, mda and
port numbers encoded into it.
For each tmnxDS3ChannelEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxDS3ChannelTable 1 }
TmnxDS3ChannelEntry ::=
SEQUENCE {
tmnxDS3ChannelRowStatus RowStatus,
tmnxDS3ChannelType INTEGER,
tmnxDS3ChannelFraming INTEGER,
tmnxDS3ChannelClockSource TmnxDSXClockSource,
tmnxDS3ChannelChannelized INTEGER,
tmnxDS3ChannelSubrateCSUMode INTEGER,
tmnxDS3ChannelSubrate Unsigned32,
tmnxDS3ChannelIdleCycleFlags TmnxDSXIdleCycleFlags,
tmnxDS3ChannelLoopback TmnxDS3Loopback,
tmnxDS3ChannelBitErrorInsertionRate Integer32,
tmnxDS3ChannelBERTPattern TmnxDSXBertPattern,
tmnxDS3ChannelBERTDuration Unsigned32,
tmnxDS3ChannelMDLEicString DisplayString,
tmnxDS3ChannelMDLLicString DisplayString,
tmnxDS3ChannelMDLFicString DisplayString,
tmnxDS3ChannelMDLUnitString DisplayString,
tmnxDS3ChannelMDLPfiString DisplayString,
tmnxDS3ChannelMDLPortString DisplayString,
tmnxDS3ChannelMDLGenString DisplayString,
tmnxDS3ChannelMDLMessageType BITS,
tmnxDS3ChannelFEACLoopRespond TruthValue,
tmnxDS3ChannelCRC INTEGER,
tmnxDS3ChannelMTU Unsigned32,
tmnxDS3ChannelOperMTU Unsigned32,
tmnxDS3ChannelReportAlarm TmnxDSXReportAlarm,
tmnxDS3ChannelReportAlarmStatus TmnxDSXReportAlarm,
tmnxDS3ChannelLastChangeTime TimeStamp,
tmnxDS3ChannelInFEACLoop TruthValue,
tmnxDS3ChannelMDLMonPortString DisplayString,
tmnxDS3ChannelMDLMonGenString DisplayString,
tmnxDS3ChannelBERTOperStatus TmnxDSXBertOperStatus,
tmnxDS3ChannelBERTSynched Unsigned32,
tmnxDS3ChannelBERTErrors Counter64,
tmnxDS3ChannelBERTTotalBits Counter64,
tmnxDS3ChannelScramble TruthValue,
tmnxDS3ChannelAcctPolicyId Unsigned32,
tmnxDS3ChannelCollectStats TruthValue,
tmnxDS3ChannelClockSyncState TmnxDSXClockSyncState,
tmnxDS3ChannelClockMasterPortId TmnxPortID
}
tmnxDS3ChannelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelRowStatus controls the creation and deletion of
row entries in the tmnxDS3ChannelTable.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme."
::= { tmnxDS3ChannelEntry 1 }
tmnxDS3ChannelType OBJECT-TYPE
SYNTAX INTEGER {
ds3 (1),
e3 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelType indicates whether the channel is
in DS3 or E3 mode."
::= { tmnxDS3ChannelEntry 2 }
tmnxDS3ChannelFraming OBJECT-TYPE
SYNTAX INTEGER {
cbit (1),
m23 (2),
g751 (3),
g832 (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelFraming indicates the type of framing
associated with the DS3 channel.
If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'.
If tmnxDS3ChannelType is set to 'e3', the default framing is 'g751'."
DEFVAL { cbit }
::= { tmnxDS3ChannelEntry 3 }
tmnxDS3ChannelClockSource OBJECT-TYPE
SYNTAX TmnxDSXClockSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelClockSource configures the clock for transmitted data
from either the internal clock ('nodeTimed'), or from a clock
recovered from the line's receive data stream ('loopTimed')."
DEFVAL { loopTimed }
::= { tmnxDS3ChannelEntry 4 }
tmnxDS3ChannelChannelized OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ds1 (2),
e1 (3),
j1 (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelChannelized is used to create sub-channels of type
'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none'
removes the sub-channels on the interface."
DEFVAL { none }
::= { tmnxDS3ChannelEntry 5 }
tmnxDS3ChannelSubrateCSUMode OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
digital-link (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU)
compatibility mode to interoperate with existing DS3 subrate
standards.
This configuration applies only for a non-channelized DS3.
Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets
the value of tmnxDS3ChannelScramble to 'false'.
Changing the value of tmnxDS3ChannelSubrateCSUMode
resets the value of tmnxDS3ChannelSubrate to default for the mode if
tmnxDS3ChannelSubrate is not provided."
DEFVAL { notUsed }
::= { tmnxDS3ChannelEntry 6 }
tmnxDS3ChannelSubrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelSubrate configures the subrate step.
tmnxDS3ChannelSubrate multiplied by the granularity for a
particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives
the absoulte subrate in kbps.
-----------------------------------------------------------------------
Subrate CSU Mode|Granularity|Default |Range |Subrate speed range
----------------------------------------------------------`-------------
notUsed | N/A | 0 | 0 |N/A
digital-link | 301 kbps | 1 | 1 to 147 |301 kbps to 44.2 mbps
-----------------------------------------------------------------------"
::= { tmnxDS3ChannelEntry 7 }
tmnxDS3ChannelIdleCycleFlags OBJECT-TYPE
SYNTAX TmnxDSXIdleCycleFlags
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelIdleCycleFlags configures the value that the
DS3 port transmits during idle cycle.
The default value applies to HDLC channels only. For ATM
channels the object does not really apply so a default value
of 'none' is used and cannot be changed."
DEFVAL { flags }
::= { tmnxDS3ChannelEntry 8 }
tmnxDS3ChannelLoopback OBJECT-TYPE
SYNTAX TmnxDS3Loopback
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelLoopback is used to put the channel into a loopback mode.
The value of tmnxPortAdminStatus should be set to 'outOfService'
in order for the loopback to be enabled.
A 'line' loopback loops frames received on this port back to the
remote system.
A 'internal' loopback loops the frames from the local system back at
the framer.
When the value is set to 'remote', a signal is sent to the remote
system to provide a line loopback."
DEFVAL { none }
::= { tmnxDS3ChannelEntry 9 }
tmnxDS3ChannelBitErrorInsertionRate OBJECT-TYPE
SYNTAX Integer32 (0 | 2..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7
will cause an error rate of 10^(-7), or 1 error in every 10
million bits transmitted.
If the value is set to 0, it disables the insertion of bit errors
into the BERT.
Change in this value while the test is running is accepted but
does not take effect until the test gets restarted."
DEFVAL { 0 }
::= { tmnxDS3ChannelEntry 10 }
tmnxDS3ChannelBERTPattern OBJECT-TYPE
SYNTAX TmnxDSXBertPattern
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelBERTPattern indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration
indicates the duration of the test.
Setting the value of this object to 'none' terminates the test."
DEFVAL { none }
::= { tmnxDS3ChannelEntry 11 }
tmnxDS3ChannelBERTDuration OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelBERTDuration is used to set the duration of the
BERT test."
::= { tmnxDS3ChannelEntry 12 }
tmnxDS3ChannelMDLEicString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the
Message Data Link (MDL)."
::= { tmnxDS3ChannelEntry 13 }
tmnxDS3ChannelMDLLicString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..11))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the
Message Data Link (MDL)."
::= { tmnxDS3ChannelEntry 14 }
tmnxDS3ChannelMDLFicString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the
Message Data Link (MDL)."
::= { tmnxDS3ChannelEntry 15 }
tmnxDS3ChannelMDLUnitString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the
Message Data Link (MDL)."
::= { tmnxDS3ChannelEntry 16 }
tmnxDS3ChannelMDLPfiString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..38))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in
the Message Data Link (MDL) Path message."
::= { tmnxDS3ChannelEntry 17 }
tmnxDS3ChannelMDLPortString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..38))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLPortString configures the port number string sent in
the Message Data Link (MDL) idle signal message."
::= { tmnxDS3ChannelEntry 18 }
tmnxDS3ChannelMDLGenString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..38))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLGenString configures the generator number string
sent in the Message Data Link (MDL) test signal message."
::= { tmnxDS3ChannelEntry 19 }
tmnxDS3ChannelMDLMessageType OBJECT-TYPE
SYNTAX BITS {
none (0),
ds3Path (1),
idleSignal (2),
testSignal (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLMessageType configures the type of MDL message that
is transmitted over the DS3 interface. If the value of this object is
set to 'none', MDL messages are not transmitted.
ds3Path(0) - Enables transmission of the MDL path message.
An MDL path message, as defined by ANSI T1.107, is
distinguished from idle and test signal messages in
that it contains a facility identification code as its
final data element.
idleSignal(1) - Enables transmission of the MDL idle signal message.
An MDL idle signal message, as defined by ANSI T1.107,
is distinguished from path and test signal messages in
that it contains a port number as its final data
element.
testSignal(2) - Enables transmission of the MDL test signal message.
An MDL test signal message, as defined by ANSI T1.107,
is distinguished from path and idle signal messages in
that it contains a generator number as its final data
element."
DEFVAL { { none } }
::= { tmnxDS3ChannelEntry 20 }
tmnxDS3ChannelFEACLoopRespond OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has
a value of 'false' the port will not respond."
DEFVAL { false }
::= { tmnxDS3ChannelEntry 21 }
tmnxDS3ChannelCRC OBJECT-TYPE
SYNTAX INTEGER {
crc16 (1),
crc32 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead.
For ATM channels, crc32 is the default and the only value supported
and applies to AAL5 CRC calculation on that channel."
DEFVAL { crc16 }
::= { tmnxDS3ChannelEntry 22 }
tmnxDS3ChannelMTU OBJECT-TYPE
SYNTAX Unsigned32 (0|512..9208)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the port, specified in octets. For ports that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent on the
sonet path.
Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical default values are:
1522 with mode access and encap-type bcp-null
1526 with mode access and encap-type bcp-dot1q
1502 with mode access and encap-type ipcp
4474 with mode access and encap-type frame-relay
1524 with mode access and encap-type atm
2092 with mode access and encap-type cem
"
::= { tmnxDS3ChannelEntry 23 }
tmnxDS3ChannelOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet which can be sent on
the channel, specified in octets. For channels that are used
for transmitting network datagrams, this is the size of the largest
network datagram that can be sent."
::= { tmnxDS3ChannelEntry 24 }
tmnxDS3ChannelReportAlarm OBJECT-TYPE
SYNTAX TmnxDSXReportAlarm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelReportAlarm determines when and if to
generate notifications for this channel:
ais - Reports alarm indication signal errors.
ais alarms are issued by default.
los - Reports loss of signal errors.
los alarms are issued by default.
oof - Reports out-of-frame errors.
oof alarms are not issued by default.
rai - Reports resource availability indicator events.
rai alarms are not issued by default.
looped - Reports if the far end has forced the near end to loopback.
looped alarms are not issued by default.
berSd - Reports DS3/E3 signal degradation bit errors.
berSd alarms are not issued by default.
berSf - Reports DS3/E3 signal failure bit errors.
berSf alarms are not issued by default"
DEFVAL { {ais, los} }
::= { tmnxDS3ChannelEntry 25 }
tmnxDS3ChannelReportAlarmStatus OBJECT-TYPE
SYNTAX TmnxDSXReportAlarm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelReportAlarmStatus indicates the current
alarms on this port."
::= { tmnxDS3ChannelEntry 26 }
tmnxDS3ChannelLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS3ChannelEntry row for this port."
::= { tmnxDS3ChannelEntry 27 }
tmnxDS3ChannelInFEACLoop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelInFEACLoop indicates whether the remote end has put
this channel in FEAC(Far End Alarm Control) loopback."
::= { tmnxDS3ChannelEntry 28 }
tmnxDS3ChannelMDLMonPortString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..38))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLMonPortString indicates the port number string
received in the Message Data Link (MDL) idle signal message."
::= { tmnxDS3ChannelEntry 29 }
tmnxDS3ChannelMDLMonGenString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..38))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelMDLMonGenString indicates the generator number string
received in the Message Data Link (MDL) test signal message."
::= { tmnxDS3ChannelEntry 30 }
tmnxDS3ChannelBERTOperStatus OBJECT-TYPE
SYNTAX TmnxDSXBertOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test
as specified by TmnxDSXBertOperStatus."
::= { tmnxDS3ChannelEntry 31 }
tmnxDS3ChannelBERTSynched OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelBERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal to
the duration of the last BERT test. It is valid only after
tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated."
::= { tmnxDS3ChannelEntry 32 }
tmnxDS3ChannelBERTErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelBERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus
transitioned from 'active' to 'idle' the last time BERT
was activated."
::= { tmnxDS3ChannelEntry 33 }
tmnxDS3ChannelBERTTotalBits OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS3ChannelBERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT
hardware is synchronized. It is valid only after
tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated."
::= { tmnxDS3ChannelEntry 34 }
tmnxDS3ChannelScramble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When tmnxDS3ChannelScramble indicates whether scrambling
is enabled on this channel. Both ends of the connection
must use the same scrambling algorithm. The default value
is 'true' if the tmnxPortEncapType is atmEncap for this
channel and indicates ATM payload scrambling; otherwise
(tmnxPortEncapType is not atmEncap) the default is 'false'
and can only be changed to true if the value of
tmnxDS3ChannelSubrateCSUMode is digital-link (1)"
::= { tmnxDS3ChannelEntry 35 }
tmnxDS3ChannelAcctPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting
policy to use for the ds3 channel. Accounting policies can only be
associated with network ports or channels.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this channel. A zero value indicates that there is no
accounting policy associated with this channel"
DEFVAL { 0 }
::= { tmnxDS3ChannelEntry 36 }
tmnxDS3ChannelCollectStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelCollectStats specifies whether or not the
collection of accounting and statistical data for the network ds3
channel is collected.
When the value is set to false, the statistics are still accumulated
by the IOM cards, however, the CPM will not obtain the results and
write them to the billing file.
When applying accounting policies the data by default will be collected
in the appropriate records and written to the designated billing file."
DEFVAL { true }
::= { tmnxDS3ChannelEntry 37 }
tmnxDS3ChannelClockSyncState OBJECT-TYPE
SYNTAX TmnxDSXClockSyncState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelClockSyncState indicates the current clock
synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or
'differential'."
::= { tmnxDS3ChannelEntry 38 }
tmnxDS3ChannelClockMasterPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS3ChannelClockMasterPortId indicates the current
clock synchronization master port id if tmnxDS3ChannelClockSource
is 'adaptive' or 'differential'."
::= { tmnxDS3ChannelEntry 39 }
--
-- DS1 table
--
tmnxDS1Table OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDS1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDS1Table has an entry for each DS1 channel."
::= { tmnxPortObjs 12 }
tmnxDS1Entry OBJECT-TYPE
SYNTAX TmnxDS1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a DS1 channel on a IOM card
in a chassis in the system. DS1 channel entries for DS3
ports cannot be created and deleted via SNMP SET operations.
Entries in this table will be created automatically when
tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries
for DS1 ports can be created and deleted via SNMP SET operations.
For each tmnxDS1Entry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxDS1Table 1 }
TmnxDS1Entry ::=
SEQUENCE {
tmnxDS1RowStatus RowStatus,
tmnxDS1Type INTEGER,
tmnxDS1Framing INTEGER,
tmnxDS1IdleCycleFlags TmnxDSXIdleCycleFlags,
tmnxDS1Loopback TmnxDS1Loopback,
tmnxDS1InvertData TruthValue,
tmnxDS1BitErrorInsertionRate Integer32,
tmnxDS1BERTPattern TmnxDSXBertPattern,
tmnxDS1BERTDuration Unsigned32,
tmnxDS1ReportAlarm TmnxDSXReportAlarm,
tmnxDS1ReportAlarmStatus TmnxDSXReportAlarm,
tmnxDS1LastChangeTime TimeStamp,
tmnxDS1ClockSource TmnxDSXClockSource,
tmnxDS1BERTOperStatus TmnxDSXBertOperStatus,
tmnxDS1BERTSynched Unsigned32,
tmnxDS1BERTErrors Counter64,
tmnxDS1BERTTotalBits Counter64,
tmnxDS1RemoteLoopRespond TruthValue,
tmnxDS1InRemoteLoop TruthValue,
tmnxDS1InsertSingleBitError TmnxActionType,
tmnxDS1SignalMode INTEGER,
tmnxDS1ClockSyncState TmnxDSXClockSyncState,
tmnxDS1ClockMasterPortId TmnxPortID,
tmnxDS1BerSdThreshold Unsigned32,
tmnxDS1BerSfThreshold Unsigned32
}
tmnxDS1RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1RowStatus controls the creation and deletion of
row entries in the tmnxDS1Table.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme."
::= { tmnxDS1Entry 1 }
tmnxDS1Type OBJECT-TYPE
SYNTAX INTEGER {
ds1(1),
e1 (2),
j1 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS1Type indicates whether the DS1 channel is
in DS1, E1 or J1 mode."
::= { tmnxDS1Entry 2 }
tmnxDS1Framing OBJECT-TYPE
SYNTAX INTEGER {
esf (1),
sf (2),
g704-no-crc (3),
g704 (4),
e1-unframed (5),
ds1-unframed (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS1Framing indicates the type of framing associated
with the channel:
esf ESF (extended super frame) mode for T1 interfaces.
sf SF (super frame) mode for T1 interfaces.
g704 G.704 framing format for E1 interfaces.
g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces.
e1-unframed E1 Unframed (G.703) mode for E1 interfaces.
ds1-unframed Unframed mode for T1 interfaces.
If tmnxDS1Type is set to 'ds1', the default framing is 'esf'.
If tmnxDS1Type is set to 'e1', the default framing is 'g704'.
Changing the value of tmnxDS1Framing resets the values of
tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults
and turns off reporting of berSd and berSf alarms
in tmnxDS1ReportAlarm."
DEFVAL { esf }
::= { tmnxDS1Entry 3 }
tmnxDS1IdleCycleFlags OBJECT-TYPE
SYNTAX TmnxDSXIdleCycleFlags
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"tmnxDS1IdleCycleFlags configures the value that the DS1
channel transmits during idle cycle."
DEFVAL { flags }
::= { tmnxDS1Entry 4 }
tmnxDS1Loopback OBJECT-TYPE
SYNTAX TmnxDS1Loopback
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1Loopback is used to put the channel into a loopback mode. The
value of tmnxPortAdminStatus should be set to 'outOfService' in order
for the loopback to be enabled.
A 'line' loopback loops frames received on this port back to the
remote system.
A 'internal' loopback loops frames from the local system back at
the framer.
A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid
with tmnxDS1Framing set to 'esf' framing.
A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312.
This is valid with tmnxDS1Framing set to 'esf'.
A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is
valid with tmnxDS1Framing set to 'sf'."
DEFVAL { none }
::= { tmnxDS1Entry 5 }
tmnxDS1InvertData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting tmnxDS1InvertData to 'true' causes all data bits to
be inverted, to guarantee ones density. It is typically used with
AMI line encoding."
DEFVAL { false }
::= { tmnxDS1Entry 6 }
tmnxDS1BitErrorInsertionRate OBJECT-TYPE
SYNTAX Integer32 (0 | 2..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1BitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7
will cause an error rate of 10^(-7), or 1 error in every 10
million bits transmitted.
If the value is set to 0, disables the insertion of bit errors into
the BERT.
Change in this value while the test is running is accepted but
does not take effect until the test gets restarted."
DEFVAL { 0 }
::= { tmnxDS1Entry 7 }
tmnxDS1BERTPattern OBJECT-TYPE
SYNTAX TmnxDSXBertPattern
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1BERTPattern object indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration
indicates the duration of the test.
Setting the value to 'none' terminates the test."
DEFVAL { none }
::= { tmnxDS1Entry 8 }
tmnxDS1BERTDuration OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1BERTDuration is used to set the duration of the BERT test."
::= { tmnxDS1Entry 9 }
tmnxDS1ReportAlarm OBJECT-TYPE
SYNTAX TmnxDSXReportAlarm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS1ReportAlarm determines when and if to
generate notifications for this channel:
ais - Reports alarm indication signal errors.
ais alarms are issued by default.
los - Reports loss of signal errors.
los alarms are issued by default.
oof - Reports out-of-frame errors.
oof alarms are not issued by default.
rai - Reports resource availability indicator events.
rai alarms are not issued by default.
looped - Reports if the far end has forced the near end to loopback.
looped alarms are not issued by default.
berSd - Reports DS1/E1/J1 signal degradation bit errors.
berSd alarms are not issued by default.
berSf - Reports DS1/E1/J1 signal failure bit errors.
berSf alarms are not issued by default"
DEFVAL { {ais, los} }
::= { tmnxDS1Entry 10 }
tmnxDS1ReportAlarmStatus OBJECT-TYPE
SYNTAX TmnxDSXReportAlarm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS1ReportAlarmStatus indicates the current alarms
on this channel."
::= { tmnxDS1Entry 11 }
tmnxDS1LastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxDS1LastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS1Entry row for this channel."
::= { tmnxDS1Entry 12 }
tmnxDS1ClockSource OBJECT-TYPE
SYNTAX TmnxDSXClockSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1ClockSource configures the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTimed'), or recovered
adaptively from the rate at which the data that is received and not
from the physical layer ('adaptive'), or recovered from the
differential timestamp in the RTP header ('differential')."
DEFVAL { loopTimed }
::= { tmnxDS1Entry 13 }
tmnxDS1BERTOperStatus OBJECT-TYPE
SYNTAX TmnxDSXBertOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS1BERTOperStatus indicates the status of the BERT test as
specified by TmnxDSXBertOperStatus."
::= { tmnxDS1Entry 14 }
tmnxDS1BERTSynched OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS1BERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal to
the duration of the last BERT test. It is valid only after
tmnxDS1BERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated."
::= { tmnxDS1Entry 15 }
tmnxDS1BERTErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS1BERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS1BERTOperStatus
transitioned from 'active' to 'idle' the last time BERT
was activated."
::= { tmnxDS1Entry 16 }
tmnxDS1BERTTotalBits OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS1BERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT
hardware is synchronized. It is valid only after
tmnxDS1BERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated."
::= { tmnxDS1Entry 17 }
tmnxDS1RemoteLoopRespond OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When tmnxDS1RemoteLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has
a value of 'false' the port will not respond."
DEFVAL { false }
::= { tmnxDS1Entry 18 }
tmnxDS1InRemoteLoop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS1InRemoteLoop indicates whether the remote end has put
this channel in remote loopback."
::= { tmnxDS1Entry 19 }
tmnxDS1InsertSingleBitError OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1InsertSingleBitError is used to insert a single bit error for a
BERT test."
::= { tmnxDS1Entry 20 }
tmnxDS1SignalMode OBJECT-TYPE
SYNTAX INTEGER {
none (1),
cas (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS1SignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this channel.
The default signalling is 'none'. "
DEFVAL { none }
::= { tmnxDS1Entry 21 }
tmnxDS1ClockSyncState OBJECT-TYPE
SYNTAX TmnxDSXClockSyncState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS1ClockSyncState indicates the current clock
synchronization state if tmnxDS1ClockSource is 'adaptive' or
'differential'."
::= { tmnxDS1Entry 22 }
tmnxDS1ClockMasterPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDS1ClockMasterPortId indicates the current clock
synchronization master port id if tmnxDS1ClockSource is 'adaptive'
or 'differential'."
::= { tmnxDS1Entry 23 }
tmnxDS1BerSdThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1|5|10|50|100)
UNITS "error bits in million bits received"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm
notification for a BER SD failure and a tmnxEqPortDS1AlarmClear
notification for a BER SD failure clear. Bit error computed must
reach/exceed threshold value over a pre-defined period of time
for the tmnxEqPortSonetAlarm notification to be sent.
The value of tmnxDS1Framing defines how the bit error is
computed and what values of tmnxDS1BerSdThreshold are allowed.
The following table defines this dependency:
tmnxDS1Framing Bit error calculation and value supported
-------------- -----------------------------------------
esf (1) each CRC error is counted as one bit error
g704 (4) values supported are 1,5,10,50,100
other values bit error alarms not supported, value
of tmnxDS1BerSdThreshold set to default and
cannot be changed
tmnxDS1BerSdThreshold value must not exceed the value of
tmnxDS1BerSfThreshold."
DEFVAL { 5 }
::= { tmnxDS1Entry 24 }
tmnxDS1BerSfThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1|5|10|50|100)
UNITS "error bits in million bits received"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm
notification for a BER SF failure and a tmnxEqPortDS1AlarmClear
notification for a BER SF failure clear. Bit error computed must
reach/exceed threshold value over a pre-defined period of time
for the tmnxEqPortSonetAlarm notification to be sent.
The value of tmnxDS1Framing defines how the bit errors are
computed and what values of tmnxDS1BerSfThreshold are allowed.
The following table defines this dependency:
tmnxDS1Framing Bit error calculation and value supported
-------------- -----------------------------------------
esf (1) each CRC error is counted as one bit error
g704 (4) values supported are 1,5,10,50,100
other values bit error alarms not supported, value
of tmnxDS1BerSfThreshold set to default and
cannot be changed
tmnxDS1BerSfThreshold value must not be smaller than
tmnxDS1BerSdThreshold value"
DEFVAL { 50 }
::= { tmnxDS1Entry 25 }
--
-- DS0 Channel Group Table
--
tmnxDS0ChanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDS0ChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDS0ChanGroupTable has an entry for DS0 channels
grouped together and belonging to a particular DS1 channel."
::= { tmnxPortObjs 13 }
tmnxDS0ChanGroupEntry OBJECT-TYPE
SYNTAX TmnxDS0ChanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents one or more DS0 channels on a
DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or
remove DS0 channels from the group.
Entries can be created and deleted via SNMP SET operations
using the tmnxDS0ChanGroupRowStatus object.
For each tmnxDS0ChanGroupEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxDS0ChanGroupTable 1 }
TmnxDS0ChanGroupEntry ::=
SEQUENCE {
tmnxDS0ChanGroupRowStatus RowStatus,
tmnxDS0ChanGroupTimeSlots TmnxDs0ChannelList,
tmnxDS0ChanGroupSpeed INTEGER,
tmnxDS0ChanGroupCRC INTEGER,
tmnxDS0ChanGroupMTU Unsigned32,
tmnxDS0ChanGroupOperMTU Unsigned32,
tmnxDS0ChanGroupLastChangeTime TimeStamp,
tmnxDS0ChanGroupIdleCycleFlags TmnxDSXIdleCycleFlags,
tmnxDS0ChanGroupScramble TruthValue,
tmnxDS0ChanGroupAcctPolicyId Unsigned32,
tmnxDS0ChanGroupCollectStats TruthValue,
tmnxDS0ChanGroupPayloadFillType TmnxDSXIdleFillType,
tmnxDS0ChanGroupPayloadPattern Unsigned32,
tmnxDS0ChanGroupSignalFillType TmnxDSXIdleFillType,
tmnxDS0ChanGroupSignalPattern Unsigned32
}
tmnxDS0ChanGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS0ChanGroupRowStatus controls the creation and deletion of
row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calculate the tmnxPortPortID based on the
TiMOS encoding scheme."
::= { tmnxDS0ChanGroupEntry 1 }
tmnxDS0ChanGroupTimeSlots OBJECT-TYPE
SYNTAX TmnxDs0ChannelList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS0ChanGroupTimeSlots is a bitmap which is used to
add/remove DS0 timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of the
bitmap organization.
When a channel group is created on unframed DS1/E1, all timeslots
as applicable to a given speed are auto-allocated and cannot be
changed.
When a channel group is created on a framed DS1/E1 or
existing channel group's encapsulation is changed from ATM,
the default of no timeslots is auto-assigned to the group.
When a channel group on a framed DS1/E1 is configured for
ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1)
and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed."
::= { tmnxDS0ChanGroupEntry 2 }
tmnxDS0ChanGroupSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed-56 (1),
speed-64 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS0ChanGroupSpeed configures the required link speed
for all the time slots included in this channel group."
::= { tmnxDS0ChanGroupEntry 3 }
tmnxDS0ChanGroupCRC OBJECT-TYPE
SYNTAX INTEGER {
crc16 (1),
crc32 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead.
For channel groups with encapsulation set to ATM, the default and
only supported value is crc32 and applies to AAL5 CRC calculations
on that channel group."
DEFVAL { crc16 }
::= { tmnxDS0ChanGroupEntry 4 }
tmnxDS0ChanGroupMTU OBJECT-TYPE
SYNTAX Unsigned32 (0|512..9208)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent.
Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical default values are:
1522 with mode access and encap-type bcp-null
1526 with mode access and encap-type bcp-dot1q
1502 with mode access and encap-type ipcp
4474 with mode access and encap-type frame-relay
1524 with mode access and encap-type atm
2092 with mode access and encap-type cem
"
::= { tmnxDS0ChanGroupEntry 5 }
tmnxDS0ChanGroupOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent."
::= { tmnxDS0ChanGroupEntry 6 }
tmnxDS0ChanGroupLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS0ChanGroupEntry row for this channel group."
::= { tmnxDS0ChanGroupEntry 7 }
tmnxDS0ChanGroupIdleCycleFlags OBJECT-TYPE
SYNTAX TmnxDSXIdleCycleFlags
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS0ChanGroupIdleCycleFlags configures the value that the
channel group transmits during idle cycle.
The default value applies to HDLC channels only. For ATM and CEM
channels the object does not really apply so a default value of
'none' is used and cannot be changed."
DEFVAL { flags }
::= { tmnxDS0ChanGroupEntry 8 }
tmnxDS0ChanGroupScramble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS0ChanGroupScramble indicates whether payload scrambling
is enabled on this ATM channel. Both ends of the connection
must use the same scrambling algorithm. The default value
is 'true' if the tmnxPortEncapType is atmEncap for this
channel, otherwise the default is 'false' and not allowed to
change."
::= { tmnxDS0ChanGroupEntry 9 }
tmnxDS0ChanGroupAcctPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting
policy to use for the ds0 channel-group. Accounting policies can only
be associated with network ports or channels.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this channel-group. A zero value indicates that there is
no accounting policy associated with this channel"
DEFVAL { 0 }
::= { tmnxDS0ChanGroupEntry 10 }
tmnxDS0ChanGroupCollectStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupCollectStats specifies whether or not the
collection of accounting and statistical data for the network ds0
channel-group is collected.
When the value is set to false, the statistics are still accumulated
by the IOM cards, however, the CPM will not obtain the results and
write them to the billing file.
When applying accounting policies the data by default will be collected
in the appropriate records and written to the designated billing file."
DEFVAL { true }
::= { tmnxDS0ChanGroupEntry 11 }
tmnxDS0ChanGroupPayloadFillType OBJECT-TYPE
SYNTAX TmnxDSXIdleFillType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern.
The default value depends on the encap type of the channel group:
For CEM encap - 'allOnes'
For all other encaps - 'notApplicable'
For a ds1-unframed and e1-unframed CEM encap DS0 channel group the
only supported value is 'allOnes'.
For non-CEM encap channel groups the value cannot be changed."
DEFVAL { notApplicable }
::= { tmnxDS0ChanGroupEntry 12 }
tmnxDS0ChanGroupPayloadPattern OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload
fill pattern when the CEM channel group experiences an underrun and
tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'.
The default value depends on the encap type of the channel group:
For CEM encap channel group - 255 (Valid range 0..255)
For non-CEM encap channel group - 0 (Valid range 0..0)."
DEFVAL { 0 }
::= { tmnxDS0ChanGroupEntry 13 }
tmnxDS0ChanGroupSignalFillType OBJECT-TYPE
SYNTAX TmnxDSXIdleFillType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupSignalFillType specifies the type of
idle signal fill to be sent when the CAS CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
tmnxDS0ChanGroupSignalPattern is used to define the signal pattern.
The default value depends on the encap of the DS0 channel group and
the signal-mode of the DS1/E1:
For CEM encap on DS1/E1 with CAS signal mode - 'allOnes'
For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable'
For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM
encap channel groups the value cannot be changed."
DEFVAL { notApplicable }
::= { tmnxDS0ChanGroupEntry 14 }
tmnxDS0ChanGroupSignalPattern OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal
fill pattern when the CAS CEM channel group experiences an underrun
and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'.
CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD)
CAS SF DS1 supports 2 signalling bits per timeslot (AB)
The default value depends on the type of channel group:
For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15)
For CAS DS1 SF channel group - 3 (Valid range 0..3)
For non-CAS or non-CEM channel group - 0 (Valid range 0..0)"
DEFVAL { 0 }
::= { tmnxDS0ChanGroupEntry 15 }
--
-- Bundle Table
--
tmnxBundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxBundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxBundleTable has an entry for a bundle created on the system."
::= { tmnxPortObjs 14 }
tmnxBundleEntry OBJECT-TYPE
SYNTAX TmnxBundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a multilink bundle on a MDA.
Entries can be created and deleted via SNMP SET operations
using the tmnxBundleRowStatus object. The tmnxBundleBundleID will
contain the bundle number encoded in it. The bundle number is
unique for a MDA.
For each tmnxBundleEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxBundleBundleID }
::= { tmnxBundleTable 1 }
TmnxBundleEntry ::=
SEQUENCE {
tmnxBundleBundleID TmnxBundleID,
tmnxBundleRowStatus RowStatus,
tmnxBundleType INTEGER,
tmnxBundleMinimumLinks Unsigned32,
tmnxBundleNumLinks Unsigned32,
tmnxBundleNumActiveLinks Unsigned32,
tmnxBundleMRRU Unsigned32,
tmnxBundleOperMRRU Unsigned32,
tmnxBundlePeerMRRU Unsigned32,
tmnxBundleOperMTU Unsigned32,
tmnxBundleRedDiffDelay Unsigned32,
tmnxBundleRedDiffDelayAction INTEGER,
tmnxBundleYellowDiffDelay Unsigned32,
tmnxBundleShortSequence TruthValue,
tmnxBundleLastChangeTime TimeStamp,
tmnxBundleFragmentThreshold Unsigned32,
tmnxBundleUpTime Unsigned32,
tmnxBundleInputDiscards Counter32,
tmnxBundlePrimaryMemberPortID TmnxPortID,
tmnxBundleLFI TruthValue,
tmnxBundleProtectedType INTEGER,
tmnxBundleParentBundle TmnxBundleID
}
tmnxBundleBundleID OBJECT-TYPE
SYNTAX TmnxBundleID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxBundleBundleID identifies this multilink bundle. The value of
this object is calculated using the TiMOS encoding scheme described
in TmnxBundleID.
tmnxBundleBundleID is used as an index into the ifTable and the
tmnxPortTable to access an entry corresponding to this entry."
::= { tmnxBundleEntry 1 }
tmnxBundleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleRowStatus controls the creation and deletion of
row entries in the tmnxBundleTable.
The manager has to first calculate the tmnxBundleBundleID
based on the TiMOS encoding."
::= { tmnxBundleEntry 2 }
tmnxBundleType OBJECT-TYPE
SYNTAX INTEGER {
mlppp (1),
mlfr (2),
imagrp (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleType specifies the type of this multilink bundle.
It provides a reference as to the type of bundle this row
refers to but does not map to the direct value of
bndle type defined in TmnxBundleID."
DEFVAL { mlppp }
::= { tmnxBundleEntry 3 }
tmnxBundleMinimumLinks OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMinimumLinks is the minimum number of links that must be
active for a bundle to be active. If the number of links drop below
the given minimum then the multilink bundle will transition to an
operation down state."
::= { tmnxBundleEntry 4 }
tmnxBundleNumLinks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleNumLinks indicates the total number of links configured
for this bundle."
::= { tmnxBundleEntry 5 }
tmnxBundleNumActiveLinks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleNumActiveLinks indicates the current number of active links
belonging to this bundle."
::= { tmnxBundleEntry 6 }
tmnxBundleMRRU OBJECT-TYPE
SYNTAX Unsigned32 (0|1500..9206)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMRRU is used to configure the
Max Received Reconstructed Unit (MRRU). This is the maximum frame that
can be reconstructed from multilink fragments.
This object is only applicable to tmnxBundleType values of mlppp or
mlfr. All non applicable types have a value of zero."
DEFVAL { 1524 }
::= { tmnxBundleEntry 7 }
tmnxBundleOperMRRU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleOperMRRU indicates the operational value of
Max Received Reconstructed Unit (MRRU).
This object is only applicable to tmnxBundleType values of mlppp or
mlfr. All non applicable types have a value of zero."
::= { tmnxBundleEntry 8 }
tmnxBundlePeerMRRU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundlePeerMRRU indicates the MRRU value sent by the peer
during negotiation.
This object is only applicable to tmnxBundleType values of mlppp or
mlfr. All non applicable types have a value of zero."
::= { tmnxBundleEntry 9 }
tmnxBundleOperMTU OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleOperMTU indicates the operational MTU of the bundle."
::= { tmnxBundleEntry 10 }
tmnxBundleRedDiffDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..25|0..50)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleRedDiffDelay configures the maximum acceptable differential
delay for individual circuits within this multilink bundle. If
the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded
trap is issued.
For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported,
0 to 25 otherwise."
::= { tmnxBundleEntry 11 }
tmnxBundleRedDiffDelayAction OBJECT-TYPE
SYNTAX INTEGER {
none (0),
down (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleRedDiffDelayAction specifies the action to be taken
when the differential delay exceeds the threshold configured in
tmnxBundleRedDiffDelay.
For a tmnxBundleType value of 'imagrp', only the down action is
supported."
DEFVAL { none }
::= { tmnxBundleEntry 12 }
tmnxBundleYellowDiffDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..25)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleYellowDiffDelay configures the yellow warning
threshold for the differential delay for the circuits
within a given multilink bundle. If the delay exceeds this
threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued.
This object is only applicable to tmnxBundleType values of
'mlppp' or 'mlfr'. All non applicable types have a value
of zero."
::= { tmnxBundleEntry 13 }
tmnxBundleShortSequence OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleShortSequence command specifies that the MLPPP bundle
should use short (12 bit) sequence numbers. Instead of the
standard long (24 bits) sequence number.
This object is only applicable to tmnxBundleType values of mlppp."
DEFVAL { false }
::= { tmnxBundleEntry 14 }
tmnxBundleLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxBundleLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxBundleEntry row for this channel group."
::= { tmnxBundleEntry 15 }
tmnxBundleFragmentThreshold OBJECT-TYPE
SYNTAX Unsigned32(0|128..512)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxBundleFragmentThreshold specifies the maximum length
of a fragment transmitted across the multilink bundle. Values supported
within each bundle type are H/W dependent. The value of 0 specifies
no fragmentation.
Currently, the following values are supported depending upon the
tmnxBundleType value:
tmnxBundleType tmnxBundleFragmentThreshold values supported
mlppp 0; 128 to 512 inclusive
imagrp 128"
DEFVAL { 128 }
::= { tmnxBundleEntry 16 }
tmnxBundleUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleUpTime indicates the time since the bundle is operationally
'inService'."
::= { tmnxBundleEntry 17 }
tmnxBundleInputDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleInputDiscards indicates the number of LCP packets that
were discarded. This object is only supported for a
tmnxBundleType value of mlppp."
::= { tmnxBundleEntry 18 }
tmnxBundlePrimaryMemberPortID OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary
member of this bundle. The value of this object will be zero if
there are no members configured in this bundle."
::= { tmnxBundleEntry 19 }
tmnxBundleLFI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleLFI specifies if Link Fragmentation and
Interleaving is enabled on the multilink bundle. A value of 'false'
indicates that Link Fragmentation and Interleaving is disabled on the
multilink bundle while a value of 'true' indicates that Link
Fragmentation and Interleaving is enabled on the multilink bundle.
This object is only supported for tmnxBundleType value of mlppp.
The value of tmnxBundleLFI may be modified only when no members are
part of the bundle.
This object cannot be set to true when tmnxBundleMlpppClassCount object
value is set to enable Multiclass MLPPP on the bundle."
DEFVAL { false }
::= { tmnxBundleEntry 20 }
tmnxBundleProtectedType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
working (1),
protection (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleProtectedType identifies how this bundle is part
of a tmnxBundleParentBundle. A value of 'none' identifies no protection,
'working' identifies it to be a working bundle of a tmnxBundleParentBundle and
'protection' identifies it to be a protection bundle of a tmnxBundleParentBundle.
tmnxBundleProtectedType can only be set at row creation."
DEFVAL { none }
::= { tmnxBundleEntry 21 }
tmnxBundleParentBundle OBJECT-TYPE
SYNTAX TmnxBundleID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleParentBundle specifies the parent to which this bundle belongs.
A row for the given non zero walue of tmnxBundleParentBundle must exist for
this row to be successfully created. If a bundle has no parent, its value
is zero. tmnxBundleParentBundle can only be set at row creation."
DEFVAL { 0 }
::= { tmnxBundleEntry 22 }
--
-- Bundle Link Table
--
tmnxBundleMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxBundleMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxBundleMemberTable has an entry for a member port
associated with a multilink bundle."
::= { tmnxPortObjs 15 }
tmnxBundleMemberEntry OBJECT-TYPE
SYNTAX TmnxBundleMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a port associated with a bundle. Entries
can be added or removed from this table using SNMP SET operation."
INDEX { tmnxBundleBundleID, tmnxPortPortID }
::= { tmnxBundleMemberTable 1 }
TmnxBundleMemberEntry ::=
SEQUENCE {
tmnxBundleMemberRowStatus RowStatus,
tmnxBundleMemberActive TruthValue,
tmnxBundleMemberDownReason INTEGER,
tmnxBundleMemberUpTime Unsigned32
}
tmnxBundleMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMemberRowStatus controls the creation and deletion of
row entries in the tmnxBundleMemberTable.
tmnxPortPortID identifies the port to be associated with the bundle.
A bundle entry with tmnxBundleBundleID has to exist in the
tmnxBundleTable before creating an entry in this table."
::= { tmnxBundleMemberEntry 1 }
tmnxBundleMemberActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberActive is set to 'false' for one of reasons in
tmnxBundleMemberDownReason."
::= { tmnxBundleMemberEntry 2 }
tmnxBundleMemberDownReason OBJECT-TYPE
SYNTAX INTEGER {
none (0),
outOfService (1),
redDiffDelayExceeded (2),
mismatchEndPtDiscriminator (3),
peerNotBundleMember (4),
underNegotiation (5),
peerInvalidMlHdrFmt(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberDownReason contains the reason code for marking
the member link of the bundle to down (i.e. tmnxBundleMemberActive
will be set to false):
none - The link is active and the value of tmnxBundleMemberActive
is 'true'.
outOfService - The link operational status is down.
redDiffDelayExceeded - The differential delay of the link
exceeded the configured value of red differential delay
and tmnxBundleRedDiffDelayAction was configured as 'down'.
mismatchEndPtDiscriminator - Detected inconsistent peer endpoint
discriminator for the bundle.
peerNotBundleMember - When the peer is either not added to the
bundle or is removed from the bundle.
underNegotiation - When the local end is trying to negotiate with
the peer.
peerInvalidMlHdrFmt - The peer does not support the required ML-PPP
header format. The remote peer must support the same short/long
sequence code, and at least as many classes as configured for the
local bundle.
"
::= { tmnxBundleMemberEntry 3 }
tmnxBundleMemberUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberUpTime indicates the time since the bundle member is
active as indicated by tmnxBundleMemberActive."
::= { tmnxBundleMemberEntry 4 }
--
-- Physical Port to Channel Mapping Table
--
tmnxPortToChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortToChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPortToChannelTable is a mapping table. Given a chassis index,
physical port index and channel string, it maps it to the index
of the channel. This channel index can then be used as an index
into the ifTable or the tmnxPortTable."
::= { tmnxPortObjs 16 }
tmnxPortToChannelEntry OBJECT-TYPE
SYNTAX TmnxPortToChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a mapping of the physical port index and the
channel index string to the index of the channel."
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxChannelIdxString }
::= { tmnxPortToChannelTable 1 }
TmnxPortToChannelEntry ::=
SEQUENCE {
tmnxChannelIdxString DisplayString,
tmnxChannelPortID TmnxPortID
}
tmnxChannelIdxString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxChannelIdxString is an index into the table. It contains
a string identifying a channel on the physical port."
::= { tmnxPortToChannelEntry 1 }
tmnxChannelPortID OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxChannelPortID contains the port ID of the channel. This value
is used to identify the entry for this channel in the ifTable or
the tmnxPortTable."
::= { tmnxPortToChannelEntry 2 }
--
-- Network Port ingress MDA QoS queue drop Stats Table
--
tmnxPortIngrMdaQosStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortIngrMdaQosStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table tmnxPortIngrMdaQosStatTable contains a row for each ethernet
port located on an oversubscribed MDA."
::= { tmnxPortObjs 17 }
tmnxPortIngrMdaQosStatEntry OBJECT-TYPE
SYNTAX TmnxPortIngrMdaQosStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry indicates the MDA QoS discard statistics for an
ethernet port located on an oversubscribed MDA.
tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates
the ingress rate configured for the port."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxPortIngrMdaQosStatTable 1 }
TmnxPortIngrMdaQosStatEntry ::=
SEQUENCE {
tmnxPortIngrMdaQos00StatDropPkts Counter64,
tmnxPortIngrMdaQos00StatDropOcts Counter64,
tmnxPortIngrMdaQos01StatDropPkts Counter64,
tmnxPortIngrMdaQos01StatDropOcts Counter64,
tmnxPortIngrMdaQos02StatDropPkts Counter64,
tmnxPortIngrMdaQos02StatDropOcts Counter64,
tmnxPortIngrMdaQos03StatDropPkts Counter64,
tmnxPortIngrMdaQos03StatDropOcts Counter64,
tmnxPortIngrMdaQos04StatDropPkts Counter64,
tmnxPortIngrMdaQos04StatDropOcts Counter64,
tmnxPortIngrMdaQos05StatDropPkts Counter64,
tmnxPortIngrMdaQos05StatDropOcts Counter64,
tmnxPortIngrMdaQos06StatDropPkts Counter64,
tmnxPortIngrMdaQos06StatDropOcts Counter64,
tmnxPortIngrMdaQos07StatDropPkts Counter64,
tmnxPortIngrMdaQos07StatDropOcts Counter64,
tmnxPortIngrMdaQos08StatDropPkts Counter64,
tmnxPortIngrMdaQos08StatDropOcts Counter64,
tmnxPortIngrMdaQos09StatDropPkts Counter64,
tmnxPortIngrMdaQos09StatDropOcts Counter64,
tmnxPortIngrMdaQos10StatDropPkts Counter64,
tmnxPortIngrMdaQos10StatDropOcts Counter64,
tmnxPortIngrMdaQos11StatDropPkts Counter64,
tmnxPortIngrMdaQos11StatDropOcts Counter64,
tmnxPortIngrMdaQos12StatDropPkts Counter64,
tmnxPortIngrMdaQos12StatDropOcts Counter64,
tmnxPortIngrMdaQos13StatDropPkts Counter64,
tmnxPortIngrMdaQos13StatDropOcts Counter64,
tmnxPortIngrMdaQos14StatDropPkts Counter64,
tmnxPortIngrMdaQos14StatDropOcts Counter64,
tmnxPortIngrMdaQos15StatDropPkts Counter64,
tmnxPortIngrMdaQos15StatDropOcts Counter64
}
tmnxPortIngrMdaQos00StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos00StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 1 }
tmnxPortIngrMdaQos00StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos00StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 2 }
tmnxPortIngrMdaQos01StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos01StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 3 }
tmnxPortIngrMdaQos01StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos01StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 4 }
tmnxPortIngrMdaQos02StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos02StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 5 }
tmnxPortIngrMdaQos02StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos02StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 6 }
tmnxPortIngrMdaQos03StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos03StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 7 }
tmnxPortIngrMdaQos03StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos03StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 8 }
tmnxPortIngrMdaQos04StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos04StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 9 }
tmnxPortIngrMdaQos04StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos04StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 10 }
tmnxPortIngrMdaQos05StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos05StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 11 }
tmnxPortIngrMdaQos05StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos05StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 12 }
tmnxPortIngrMdaQos06StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos06StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 13 }
tmnxPortIngrMdaQos06StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos06StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 14 }
tmnxPortIngrMdaQos07StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos07StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 15 }
tmnxPortIngrMdaQos07StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos07StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 16 }
tmnxPortIngrMdaQos08StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos08StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 17 }
tmnxPortIngrMdaQos08StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos08StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 18 }
tmnxPortIngrMdaQos09StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos09StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 19 }
tmnxPortIngrMdaQos09StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos09StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 20 }
tmnxPortIngrMdaQos10StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos10StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 21 }
tmnxPortIngrMdaQos10StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos10StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 22 }
tmnxPortIngrMdaQos11StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos11StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 23 }
tmnxPortIngrMdaQos11StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos11StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 24 }
tmnxPortIngrMdaQos12StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos12StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 25 }
tmnxPortIngrMdaQos12StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos12StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 26 }
tmnxPortIngrMdaQos13StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos13StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 27 }
tmnxPortIngrMdaQos13StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos13StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 28 }
tmnxPortIngrMdaQos14StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos14StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 29 }
tmnxPortIngrMdaQos14StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos14StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 30 }
tmnxPortIngrMdaQos15StatDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos15StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 31 }
tmnxPortIngrMdaQos15StatDropOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortIngrMdaQos15StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload condition on the MDA."
::= { tmnxPortIngrMdaQosStatEntry 32 }
--
-- Sonet Group Table
--
tmnxSonetGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxSonetGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxSonetGroupTable has an entry for each
Tributary Unit Group(TUG3) on a path. On a port which supports
unchannelized STS-3's, rows in this table are created when a
channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3.
On a port which does not support unchannelized STS-3's, the rows
in this table are implicitly created when a STS-3 is created
in the tmnxSonetPathTable. Entries in this table are implicitly
deleted when the parent entry of this group is deleted from the
tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent
is set to something other than sdhTug3."
::= { tmnxPortObjs 18 }
tmnxSonetGroupEntry OBJECT-TYPE
SYNTAX TmnxSonetGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a Tributary Unit Group(TUG3) on a path."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxSonetGroupTable 1 }
TmnxSonetGroupEntry ::=
SEQUENCE {
tmnxSonetGroupType TmnxMDAChanType,
tmnxSonetGroupParentPortID TmnxPortID,
tmnxSonetGroupChildType TmnxMDAChanType,
tmnxSonetGroupName TNamedItemOrEmpty
}
tmnxSonetGroupType OBJECT-TYPE
SYNTAX TmnxMDAChanType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxSonetGroupType indicates the sonet group type of this entry.
For STS-3/STM-1 channelization, the value of this object will
be 'sdhTug3'."
::= { tmnxSonetGroupEntry 1 }
tmnxSonetGroupParentPortID OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of
this group."
::= { tmnxSonetGroupEntry 2 }
tmnxSonetGroupChildType OBJECT-TYPE
SYNTAX TmnxMDAChanType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxSonetGroupChildType is used to configure the type of the children
of this group. Based on the value of this object, entries of
a certain channel type can be created in the tmnxSonetPathTable.
For example, if the value of this object is set to 'sonetVt15',
then 28 entries of type 'sonetVt15' can be created in
the tmnxSonetPathTable."
::= { tmnxSonetGroupEntry 3 }
tmnxSonetGroupName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxSonetGroupName is the textual name for this sonet group."
::= { tmnxSonetGroupEntry 4 }
--
-- Cisco HDLC Table
--
tmnxCiscoHDLCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCiscoHDLCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCiscoHDLCTable has an entry for each port in the system
that is configured for Cisco HDLC. It contains the parameters related
to Cisco HDLC protocol on this port."
::= { tmnxPortObjs 20 }
tmnxCiscoHDLCEntry OBJECT-TYPE
SYNTAX TmnxCiscoHDLCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCiscoHDLCEntry specifies parameters for a particular
interfaces running Cisco HDLC encapsulation. Entries cannot be created
and deleted via SNMP SET operations."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxCiscoHDLCTable 1 }
TmnxCiscoHDLCEntry ::=
SEQUENCE {
tmnxCiscoHDLCKeepAliveInt Unsigned32,
tmnxCiscoHDLCUpCount Unsigned32,
tmnxCiscoHDLCDownCount Unsigned32,
tmnxCiscoHDLCOperState TmnxOperState
}
tmnxCiscoHDLCKeepAliveInt OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxCiscoHDLCKeepAliveInt specifies the interval in seconds
used for sending periodic keepalive packets. The default value is set
to 10 seconds. A value of 0 specifies that the keepalive function is
turned off.
It is expected that the nodes at the two endpoints of
the Cisco HDLC link are provisioned with the same values."
DEFVAL {10}
::= { tmnxCiscoHDLCEntry 1 }
tmnxCiscoHDLCUpCount OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxCiscoHDLCUpCount specifies the number of continual
keepalive packets that has to be received to declare the link up.
It is expected that the nodes at the two endpoints of
the Cisco HDLC link are provisioned with the same values."
DEFVAL {1}
::= { tmnxCiscoHDLCEntry 2 }
tmnxCiscoHDLCDownCount OBJECT-TYPE
SYNTAX Unsigned32 (3..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxCiscoHDLCDownCount specifies the number of
'tmnxCiscoHDLCKeepAliveInt' intervals that must
pass without receiving a keepalive packet before the
link is declared down.
It is expected that the nodes at the two endpoints of
the Cisco HDLC link are provisioned with the same values."
DEFVAL {3}
::= { tmnxCiscoHDLCEntry 3 }
tmnxCiscoHDLCOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCiscoHDLCOperState indicates the operational
status of the Cisco HDLC protocol for this port."
::= { tmnxCiscoHDLCEntry 4 }
--
-- Cisco HDLC statisctics Table
--
tmnxCiscoHDLCStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCiscoHDLCStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCiscoHDLCStatsTable has an entry for each port in the
system that is configured for Cisco HDLC encapsulation. It contains
Cisco HDLC protocol statistics for the particular port."
::= { tmnxPortStatsObjs 3 }
tmnxCiscoHDLCStatsEntry OBJECT-TYPE
SYNTAX TmnxCiscoHDLCStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the tmnxCiscoHDLCStatsTable."
AUGMENTS { tmnxCiscoHDLCEntry }
::= { tmnxCiscoHDLCStatsTable 1 }
TmnxCiscoHDLCStatsEntry ::= SEQUENCE {
tmnxCiscoHDLCDiscardStatInPkts Unsigned32,
tmnxCiscoHDLCDiscardStatOutPkts Unsigned32,
tmnxCiscoHDLCStatInPkts Unsigned32,
tmnxCiscoHDLCStatOutPkts Unsigned32,
tmnxCiscoHDLCStatInOctets Unsigned32,
tmnxCiscoHDLCStatOutOctets Unsigned32
}
tmnxCiscoHDLCDiscardStatInPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxCiscoHDLCDiscardStatInPkts indicates the number of
inbound Cisco HDLC packets discarded."
::= { tmnxCiscoHDLCStatsEntry 1 }
tmnxCiscoHDLCDiscardStatOutPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxCiscoHDLCDiscardStatOutPkts indicates the number of
outbound Cisco HDLC packets discarded."
::= { tmnxCiscoHDLCStatsEntry 2 }
tmnxCiscoHDLCStatInPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco
HDLC packets."
::= { tmnxCiscoHDLCStatsEntry 3 }
tmnxCiscoHDLCStatOutPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco
HDLC packets."
::= { tmnxCiscoHDLCStatsEntry 4 }
tmnxCiscoHDLCStatInOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco
HDLC octets."
::= { tmnxCiscoHDLCStatsEntry 5 }
tmnxCiscoHDLCStatOutOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxCiscoHDLCStatOutOctets indicates the number of outbound
Cisco HDLC octets."
::= { tmnxCiscoHDLCStatsEntry 6 }
--
-- Frame Relay Protocol Table
--
tmnxFRDlcmiTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxFRDlcmiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxFRDlcmiTable has an entry for each port in the
system that is configured for Frame Relay. It contains
the parameters for the Data Link Connection Management
Interface (DLCMI) for the frame relay service on this port."
::= { tmnxFRObjs 1 }
tmnxFRDlcmiEntry OBJECT-TYPE
SYNTAX TmnxFRDlcmiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Parameters for a particular Data Link Connection
Management Interface. Entries cannot be created and
deleted via SNMP SET operations."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxFRDlcmiTable 1 }
TmnxFRDlcmiEntry ::=
SEQUENCE {
tmnxFRDlcmiMode INTEGER,
tmnxFRDlcmiN392Dce INTEGER,
tmnxFRDlcmiN393Dce INTEGER,
tmnxFRDlcmiT392Dce INTEGER,
tmnxFRDlcmiTxStatusEnqMsgs Counter32,
tmnxFRDlcmiRxStatusEnqMsgs Counter32,
tmnxFRDlcmiStatusEnqMsgTimeouts Counter32,
tmnxFRDlcmiTxStatusMsgs Counter32,
tmnxFRDlcmiRxStatusMsgs Counter32,
tmnxFRDlcmiStatusMsgTimeouts Counter32,
tmnxFRDlcmiDiscardedMsgs Counter32,
tmnxFRDlcmiInvRxSeqNumMsgs Counter32
}
tmnxFRDlcmiMode OBJECT-TYPE
SYNTAX INTEGER {
dte (1),
dce (2),
bidir(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxFRDlcmiMode is used to set the mode of the interface.
It can be set as Data terminal equipment (dte),
Data circuit-terminating equipment (dce) or both as Data
terminal equipment and Data circuit-terminating
equipment (bidir). "
DEFVAL { dte }
::= { tmnxFRDlcmiEntry 1 }
tmnxFRDlcmiN392Dce OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxFRDlcmiN392Dce is used to configure the LMI error
threshold for DCE interface."
DEFVAL { 3 }
::= { tmnxFRDlcmiEntry 2 }
tmnxFRDlcmiN393Dce OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxFRDlcmiN393Dce is used to configure the LMI monitored
event count for DCE interface."
DEFVAL { 4 }
::= { tmnxFRDlcmiEntry 3 }
tmnxFRDlcmiT392Dce OBJECT-TYPE
SYNTAX INTEGER (5..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxFRDlcmiT392Dce is used to configure the polling verification
timer for the Frame Relay DCE interface."
DEFVAL { 15 }
::= { tmnxFRDlcmiEntry 4 }
tmnxFRDlcmiTxStatusEnqMsgs OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status
Enquiry messages transmitted on this Frame Relay interface."
::= { tmnxFRDlcmiEntry 5 }
tmnxFRDlcmiRxStatusEnqMsgs OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status
Enquiry messages received on this Frame Relay interface."
::= { tmnxFRDlcmiEntry 6 }
tmnxFRDlcmiStatusEnqMsgTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times
the LMI agent did not receive a Status Enquiry message within
the allotted time."
::= { tmnxFRDlcmiEntry 7 }
tmnxFRDlcmiTxStatusMsgs OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status
messages transmitted on this Frame Relay interface."
::= { tmnxFRDlcmiEntry 8 }
tmnxFRDlcmiRxStatusMsgs OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status
messages received on this Frame Relay interface."
::= { tmnxFRDlcmiEntry 9 }
tmnxFRDlcmiStatusMsgTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiStatusMsgTimeouts indicates the number of times
the LMI agent did not receive a Status message within the
allotted time."
::= { tmnxFRDlcmiEntry 10 }
tmnxFRDlcmiDiscardedMsgs OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiDiscardedMsgs indicates the number of times
the LMI agent discarded a received message because it
wasn't expecting it, the type of message was incorrect,
or the contents of the message were invalid."
::= { tmnxFRDlcmiEntry 11 }
tmnxFRDlcmiInvRxSeqNumMsgs OBJECT-TYPE
SYNTAX Counter32
UNITS "messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times
the LMI agent received a message with an invalid receive
sequence number: i.e. a sequence number that does not
match the last transmitted sequence number of the agent."
::= { tmnxFRDlcmiEntry 12 }
--
-- QoS Policy Application Table
--
tmnxQosPoolAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxQosPoolAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains associations of the buffer pools with the
individual objects."
::= { tmnxQosAppObjs 2 }
tmnxQosPoolAppEntry OBJECT-TYPE
SYNTAX TmnxQosPoolAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry maintains the specifics about the association of a
buffer pool and an object."
INDEX {
tmnxChassisIndex,
tmnxObjectType,
tmnxObjectId,
tmnxObjectAppType,
tmnxObjectAppPool
}
::= { tmnxQosPoolAppTable 1 }
TmnxQosPoolAppEntry ::=
SEQUENCE {
tmnxObjectType INTEGER,
tmnxObjectId TmnxPortID,
tmnxObjectAppType INTEGER,
tmnxObjectAppPool TNamedItem,
tmnxObjectAppPoolRowStatus RowStatus,
tmnxObjectAppResvCbs Integer32,
tmnxObjectAppSlopePolicy TNamedItem,
tmnxObjectAppPoolSize Integer32
}
tmnxObjectType OBJECT-TYPE
SYNTAX INTEGER {
mda (1),
port (2),
channel (3),
bundle (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object tmnxObjectType defines the type of object to which the
pool is being setup for."
::= { tmnxQosPoolAppEntry 1 }
tmnxObjectId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxObjectId is used to identify the specific object. If
tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a
physical port with the port being '0'. For all other types the
encoding is done as per the description of TmnxPortID."
::= { tmnxQosPoolAppEntry 2 }
tmnxObjectAppType OBJECT-TYPE
SYNTAX INTEGER {
accessIngress (1),
accessEgress (2),
networkIngress (3),
networkEgress (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object tmnxObjectAppType specifies the nature of usage the pool
would be used for. The pools could be used for access or network
traffic at either ingress or egress."
::= { tmnxQosPoolAppEntry 3 }
tmnxObjectAppPool OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxObjectAppPool specifies the name of the pool to be used/created."
::= { tmnxQosPoolAppEntry 4 }
tmnxObjectAppPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object tmnxObjectAppPoolRowStatus is used to create or remove a
pool application to the object."
::= { tmnxQosPoolAppEntry 5 }
tmnxObjectAppResvCbs OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of pool size reserved for CBS. The value '-1'
implies that the reserved CBS should be computed as the sum of
the CBS requested by the entities using this pool if the application
point is 'network'. For 'access' application points the value '-1'
means a default of 30%."
DEFVAL { -1 }
::= { tmnxQosPoolAppEntry 6 }
tmnxObjectAppSlopePolicy OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxObjectAppSlopePolicy specifies the slope policy being used for
this pool. The Slope policies define the nature of the RED Slopes for
the high and the low priority traffic."
DEFVAL { "default" }
::= { tmnxQosPoolAppEntry 7 }
tmnxObjectAppPoolSize OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Size in percentage of buffer space. The value '-1' implies that
the pool size should be computed as per fair weighing between
all other pools."
DEFVAL { -1 }
::= { tmnxQosPoolAppEntry 8 }
--
-- ATM Interface Table
--
tmnxATMIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxATMIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxATMIntfTable has an entry for each port/channel in the
system that is configured for ATM. It contains ATM cell layer
configuration parameters."
::= { tmnxATMObjs 1 }
tmnxATMIntfEntry OBJECT-TYPE
SYNTAX TmnxATMIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Parameters for a particular ATM Cell
Management Interface. Entries cannot be created or
deleted via SNMP SET operations.
Entries will exist in this table when ATM encapsulation
is configured on the port/channel."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxATMIntfTable 1 }
TmnxATMIntfEntry ::=
SEQUENCE {
tmnxATMIntfCellFormat INTEGER,
tmnxATMIntfMinVpValue Integer32,
tmnxATMIntfMapping INTEGER
}
tmnxATMIntfCellFormat OBJECT-TYPE
SYNTAX INTEGER {
uni (1),
nni (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxATMIntfCellFormat is used to set the cell format
(UNI or NNI) that is to be used on the ATM interface."
DEFVAL { uni }
::= { tmnxATMIntfEntry 1 }
tmnxATMIntfMinVpValue OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"tmnxATMIntfMinVpValue is used to set the minimum
allowable VPI value that can be used on the
ATM interface for a VPC."
DEFVAL { 0 }
::= { tmnxATMIntfEntry 2 }
tmnxATMIntfMapping OBJECT-TYPE
SYNTAX INTEGER {
direct (1),
plcp (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxATMIntfMapping specifies the cell
mapping that is to be used on this ATM interface. When
tmnxPortChanType does not have a value of 'pdhDs3 (14)',
'inconsistentValue' error will be returned to SNMP SET
requests. When tmnxPortChanType has a value of 'pdhDs3 (14)',
tmnxATMIntfMapping can be set to 'plcp (2)'."
DEFVAL { direct }
::= { tmnxATMIntfEntry 3 }
--
-- Network Port Ingress Stats Table
--
tmnxPortNetIngressStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortNetIngressStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Alcatel 7x50 SR series network port ingress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the network ingress
traffic."
::= { tmnxPortStatsObjs 1 }
tmnxPortNetIngressStatsEntry OBJECT-TYPE
SYNTAX TmnxPortNetIngressStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in tmnxPortNetIngressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port."
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxPortNetIngressQueueIndex }
::= { tmnxPortNetIngressStatsTable 1 }
TmnxPortNetIngressStatsEntry ::=
SEQUENCE {
tmnxPortNetIngressQueueIndex TQueueId,
tmnxPortNetIngressFwdInProfPkts Counter64,
tmnxPortNetIngressFwdOutProfPkts Counter64,
tmnxPortNetIngressFwdInProfOcts Counter64,
tmnxPortNetIngressFwdOutProfOcts Counter64,
tmnxPortNetIngressDroInProfPkts Counter64,
tmnxPortNetIngressDroOutProfPkts Counter64,
tmnxPortNetIngressDroInProfOcts Counter64,
tmnxPortNetIngressDroOutProfOcts Counter64
}
tmnxPortNetIngressQueueIndex OBJECT-TYPE
SYNTAX TQueueId (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxPortNetIngressQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
identifies a network ingress queue for the specified port in the
managed system."
::= { tmnxPortNetIngressStatsEntry 1 }
tmnxPortNetIngressFwdInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressFwdInProfPkts indicates the number of conforming
network ingress packets forwarded on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 2 }
tmnxPortNetIngressFwdOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding
network ingress packets forwarded on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 3 }
tmnxPortNetIngressFwdInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressFwdInProfOcts indicates the number of conforming
network ingress octets forwarded on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 4 }
tmnxPortNetIngressFwdOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding
network ingress octets forwarded on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 5 }
tmnxPortNetIngressDroInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressDroInProfPkts indicates the number of conforming
network ingress packets dropped on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 6 }
tmnxPortNetIngressDroOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressDroOutProfPkts indicates the number of exceeding
network ingress packets dropped on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 7 }
tmnxPortNetIngressDroInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressDroInProfOcts indicates the number of conforming
network ingress octets dropped on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 8 }
tmnxPortNetIngressDroOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetIngressDroOutProfOcts indicates the number of exceeding
network ingress octets dropped on this port using this queue."
::= { tmnxPortNetIngressStatsEntry 9 }
--
-- Network Port Egress Stats Table
--
tmnxPortNetEgressStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortNetEgressStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Alcatel 7x50 SR series network port egress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the network egress
traffic."
::= { tmnxPortStatsObjs 2 }
tmnxPortNetEgressStatsEntry OBJECT-TYPE
SYNTAX TmnxPortNetEgressStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in tmnxPortNetEgressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port."
INDEX { tmnxChassisIndex, tmnxPortPortID, tmnxPortNetEgressQueueIndex }
::= { tmnxPortNetEgressStatsTable 1 }
TmnxPortNetEgressStatsEntry ::=
SEQUENCE {
tmnxPortNetEgressQueueIndex TQueueId,
tmnxPortNetEgressFwdInProfPkts Counter64,
tmnxPortNetEgressFwdOutProfPkts Counter64,
tmnxPortNetEgressFwdInProfOcts Counter64,
tmnxPortNetEgressFwdOutProfOcts Counter64,
tmnxPortNetEgressDroInProfPkts Counter64,
tmnxPortNetEgressDroOutProfPkts Counter64,
tmnxPortNetEgressDroInProfOcts Counter64,
tmnxPortNetEgressDroOutProfOcts Counter64
}
tmnxPortNetEgressQueueIndex OBJECT-TYPE
SYNTAX TQueueId (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxPortNetEgressQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
identifies a network egress queue for the specified port in the
managed system."
::= { tmnxPortNetEgressStatsEntry 1 }
tmnxPortNetEgressFwdInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressFwdInProfPkts indicates the number of conforming
network egress packets forwarded on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 2 }
tmnxPortNetEgressFwdOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding
network egress packets forwarded on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 3 }
tmnxPortNetEgressFwdInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressFwdInProfOcts indicates the number of conforming
network egress octets forwarded on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 4 }
tmnxPortNetEgressFwdOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding
network egress octets forwarded on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 5 }
tmnxPortNetEgressDroInProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressDroInProfPkts indicates the number of conforming
network egress packets dropped on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 6 }
tmnxPortNetEgressDroOutProfPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressDroOutProfPkts indicates the number of exceeding
network egress packets dropped on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 7 }
tmnxPortNetEgressDroInProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressDroInProfOcts indicates the number of conforming
network egress octets dropped on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 8 }
tmnxPortNetEgressDroOutProfOcts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxPortNetEgressDroOutProfOcts indicates the number of exceeding
network egress octets dropped on this port using this queue."
::= { tmnxPortNetEgressStatsEntry 9 }
--
-- Multiclass MLPPP Bundle Stats Table
--
-- This table provides per MClass MLPPP Bundle traffic statistics
-- The rows are created when tmnxBundleMlpppEntry has tmnxBundleMlpppClassCount
-- value set to enable Mclass MLPPP on a given bundle.
--
tmnxMcMlpppStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxMcMlpppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Alcatel 7x50 SR series Multiclass MLPPP
statistics table for providing the capability of
retrieving the traffic statistics for the physical queues
being used for a class of a multiclass MLPPP bundle to
forward the traffic."
::= { tmnxPortStatsObjs 4 }
tmnxMcMlpppStatsEntry OBJECT-TYPE
SYNTAX TmnxMcMlpppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in tmnxMcMlpppStatsTable. Entries are
created and deleted by the system depending on the number of
classes being used by a given MLPPP bundle."
INDEX { tmnxChassisIndex, tmnxBundleBundleID, tmnxMcMlpppClassIndex }
::= { tmnxMcMlpppStatsTable 1 }
TmnxMcMlpppStatsEntry ::=
SEQUENCE {
tmnxMcMlpppClassIndex TmnxMcMlpppClassIndex,
tmnxMcMlpppStatsIngressOct Counter32,
tmnxMcMlpppStatsIngressPkt Counter32,
tmnxMcMlpppStatsIngressErrPkt Counter32,
tmnxMcMlpppStatsEgressOct Counter32,
tmnxMcMlpppStatsEgressPkt Counter32,
tmnxMcMlpppStatsEgressErrPkt Counter32
}
tmnxMcMlpppClassIndex OBJECT-TYPE
SYNTAX TmnxMcMlpppClassIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxMcMlpppClassIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it
uniquely identifies a class of a multiclass MLPPP bundle in the
managed system."
::= { tmnxMcMlpppStatsEntry 1 }
tmnxMcMlpppStatsIngressOct OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxMcMlpppStatsIngressOct indicates the total
number of octets in all packets received on the bundle
for the given class on ingress before reassembly."
::= { tmnxMcMlpppStatsEntry 2 }
tmnxMcMlpppStatsIngressPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxMcMlpppStatsIngressPkt indicates the total
number of packets forwarded on the bundle for the given
class on ingress towards higher layer protocols."
::= { tmnxMcMlpppStatsEntry 3 }
tmnxMcMlpppStatsIngressErrPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxMcMlpppStatsIngressErrPkt indicates the total
number of packets discarded due to reassembly errors
on the bundle for the given class on ingress."
::= { tmnxMcMlpppStatsEntry 4 }
tmnxMcMlpppStatsEgressOct OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxMcMlpppStatsEgressOct indicates the total
number of octets in all packets received on the bundle
for the given class on egress before segmentation."
::= { tmnxMcMlpppStatsEntry 5 }
tmnxMcMlpppStatsEgressPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxMcMlpppStatsEgressPkt indicates the total
number of packets forwarded on the bundle for the given
class on egress towards the line."
::= { tmnxMcMlpppStatsEntry 6 }
tmnxMcMlpppStatsEgressErrPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxMcMlpppStatsEgressErrPkt indicates the total
number of packets discarded due to segmentation errors
on the bundle for the given class on egress."
::= { tmnxMcMlpppStatsEntry 7 }
--
-- IMA Group Bundle Table
--
-- Sparse Dependent Extension of the tmnxBundleTable.
--
-- The same indexes are used for both the base table tmnxBundleTable,
-- and the sparse dependent table, tmnxBundleImaGrpTable.
--
-- This in effect extends the tmnxBundleTable with additional columns.
-- Rows are created in the tmnxBundleImaGrpTable only for those entries
-- in the tmnxBundleTable for a value of 'imagrp' for the bundle type.
--
-- Deletion of a row in the tmnxBundleTable results in the
-- same fate for the row in the tmnxBundleImaGrpTable.
--
tmnxBundleImaGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxBundleImaGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxBundleImaGrpTable contains IMA Group data"
::= { tmnxPortObjs 21 }
tmnxBundleImaGrpEntry OBJECT-TYPE
SYNTAX TmnxBundleImaGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains data on an IMA Group."
INDEX { tmnxChassisIndex, tmnxBundleBundleID }
::= { tmnxBundleImaGrpTable 1 }
TmnxBundleImaGrpEntry ::=
SEQUENCE {
tmnxBundleImaGrpLnkActTimer Unsigned32,
tmnxBundleImaGrpLnkDeactTimer Unsigned32,
tmnxBundleImaGrpSymmetryMode INTEGER,
tmnxBundleImaGrpTxId INTEGER,
tmnxBundleImaGrpRxId INTEGER,
tmnxBundleImaGrpTxRefLnk TmnxPortID,
tmnxBundleImaGrpRxRefLnk TmnxPortID,
tmnxBundleImaGrpSmNeState TmnxImaGrpState,
tmnxBundleImaGrpSmFeState TmnxImaGrpState,
tmnxBundleImaGrpSmFailState TmnxImaGrpFailState,
tmnxBundleImaGrpSmDownSecs Counter32,
tmnxBundleImaGrpSmOperSecs Counter32,
tmnxBundleImaGrpAvailTxCR Gauge32,
tmnxBundleImaGrpAvailRxCR Gauge32,
tmnxBundleImaGrpNeFails Counter32,
tmnxBundleImaGrpFeFails Counter32,
tmnxBundleImaGrpTxIcpCells Counter32,
tmnxBundleImaGrpRxIcpCells Counter32,
tmnxBundleImaGrpErrorIcpCells Counter32,
tmnxBundleImaGrpLostRxIcpCells Counter32,
tmnxBundleImaGrpTxOamLablVal INTEGER,
tmnxBundleImaGrpRxOamLablVal INTEGER,
tmnxBundleImaGrpAlphaValue INTEGER,
tmnxBundleImaGrpBetaValue INTEGER,
tmnxBundleImaGrpGammaValue INTEGER,
tmnxBundleImaGrpNeClockMode TmnxImaGrpClockModes,
tmnxBundleImaGrpFeClockMode TmnxImaGrpClockModes,
tmnxBundleImaGrpVersion TmnxImaGrpVersion,
tmnxBundleImaGrpMaxConfBw Unsigned32,
tmnxBundleImaGrpTestState TmnxImaTestState,
tmnxBundleImaGrpTestMember TmnxPortID,
tmnxBundleImaGrpTestPattern INTEGER,
tmnxBundleImaGrpDiffDelayMaxObs Unsigned32,
tmnxBundleImaGrpLeastDelayLink Unsigned32
}
tmnxBundleImaGrpLnkActTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..30000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer
used to clear an existing LIF, LODS and FRI-IMA alarm. The time
specified determines how long is needed for member links to
stabilize before being activated."
DEFVAL { 10000 }
::= { tmnxBundleImaGrpEntry 1 }
tmnxBundleImaGrpLnkDeactTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..30000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer
used to raise an LIF, LODS and FRI-IMA alarm. The time
specified determines how long before a member link is declared in
error and is deactivated."
DEFVAL { 2000 }
::= { tmnxBundleImaGrpEntry 2 }
tmnxBundleImaGrpSymmetryMode OBJECT-TYPE
SYNTAX INTEGER {
symmetric (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpSymmetryMode specifies the type of cell rate
transfer over the virtual link."
DEFVAL { symmetric }
::= { tmnxBundleImaGrpEntry 3 }
tmnxBundleImaGrpTxId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTxId specifies the IMA Id generated at group
creation time used by the near-end."
::= { tmnxBundleImaGrpEntry 4 }
tmnxBundleImaGrpRxId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpRxId specifies the IMA ID generated at group
creation time used by the far-end."
::= { tmnxBundleImaGrpEntry 5 }
tmnxBundleImaGrpTxRefLnk OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTxRefLnk specifies the IMA bundle member
that was selected to be the transmit timing reference link.
If no member has been selected as the reference link a value
of zero is returned. "
::= { tmnxBundleImaGrpEntry 6 }
tmnxBundleImaGrpRxRefLnk OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpRxRefLnk specifies the IMA bundle member
that was detected to be the receive timing reference link.
If no member has been detected as the reference link a value
of zero is returned. "
::= { tmnxBundleImaGrpEntry 7 }
tmnxBundleImaGrpSmNeState OBJECT-TYPE
SYNTAX TmnxImaGrpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpSmNeState specifies the current state
of the IMA Group for the near-end."
::= { tmnxBundleImaGrpEntry 8 }
tmnxBundleImaGrpSmFeState OBJECT-TYPE
SYNTAX TmnxImaGrpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpSmFeState specifies the current state
of the IMA Group for the far-end."
::= { tmnxBundleImaGrpEntry 9 }
tmnxBundleImaGrpSmFailState OBJECT-TYPE
SYNTAX TmnxImaGrpFailState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpSmFailState specifies the current state
of the IMA Group."
::= { tmnxBundleImaGrpEntry 10 }
tmnxBundleImaGrpSmDownSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpSmDownSecs specifies the number of seconds
that the IMA Group State Machine is not Operational."
::= { tmnxBundleImaGrpEntry 11 }
tmnxBundleImaGrpSmOperSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpSmOperSecs specifies the number of seconds
that the IMA Group State Machine has been in the Operational
State."
::= { tmnxBundleImaGrpEntry 12 }
tmnxBundleImaGrpAvailTxCR OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpAvailTxCR specifies the available transmit
bandwidth on this IMA group. It only considers members that
are in the Active State."
::= { tmnxBundleImaGrpEntry 13 }
tmnxBundleImaGrpAvailRxCR OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpAvailRxCR specifies the available bandwidth
on this IMA group in the receive direction. It only considers
members that are in the Active State."
::= { tmnxBundleImaGrpEntry 14 }
tmnxBundleImaGrpNeFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpNeFails specifies the number of reported
IMA Group failures since boot time."
::= { tmnxBundleImaGrpEntry 15 }
tmnxBundleImaGrpFeFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpFeFails specifies the number of reported
IMA Group far-end failures since boot time."
::= { tmnxBundleImaGrpEntry 16 }
tmnxBundleImaGrpTxIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTxIcpCells specifies number of transmitted
ICP cells for this IMA Group."
::= { tmnxBundleImaGrpEntry 17 }
tmnxBundleImaGrpRxIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpRxIcpCells specifies number of received
ICP cells for this IMA Group."
::= { tmnxBundleImaGrpEntry 18 }
tmnxBundleImaGrpErrorIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpErrorIcpCells specifies number of
ICP cells with HEC or CRC-10 errors."
::= { tmnxBundleImaGrpEntry 19 }
tmnxBundleImaGrpLostRxIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpLostRxIcpCells specifies the number of
missing ICP cells at the expected offset."
::= { tmnxBundleImaGrpEntry 20 }
tmnxBundleImaGrpTxOamLablVal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTxOamLablVal specifies near-end value
to be transmitted."
::= { tmnxBundleImaGrpEntry 21 }
tmnxBundleImaGrpRxOamLablVal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpRxOamLablVal specifies far-end value
received."
::= { tmnxBundleImaGrpEntry 22 }
tmnxBundleImaGrpAlphaValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpAlphaValue specifies the number of
consecutive ICP cells that need to be detected
before moving from the IMA Sync State to the IMA Hunt
State."
DEFVAL { 2 }
::= { tmnxBundleImaGrpEntry 23 }
tmnxBundleImaGrpBetaValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpBetaValue specifies the number of
consecutive errored ICP cells that need to be detected
before moving from the IMA Sync State to the IMA Hunt
State"
DEFVAL { 2 }
::= { tmnxBundleImaGrpEntry 24 }
tmnxBundleImaGrpGammaValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpGammaValue specifies the number of
consecutive valid ICP cells that need to be detected
before moving from the IMA pre-Sync State to the
IMA Hunt State."
DEFVAL { 1 }
::= { tmnxBundleImaGrpEntry 25 }
tmnxBundleImaGrpNeClockMode OBJECT-TYPE
SYNTAX TmnxImaGrpClockModes
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpNeClockMode specifies near-end transmit
clock mode."
DEFVAL { ctc }
::= { tmnxBundleImaGrpEntry 26 }
tmnxBundleImaGrpFeClockMode OBJECT-TYPE
SYNTAX TmnxImaGrpClockModes
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpFeClockMode specifies far-end transmit
clock mode."
DEFVAL { ctc }
::= { tmnxBundleImaGrpEntry 27 }
tmnxBundleImaGrpVersion OBJECT-TYPE
SYNTAX TmnxImaGrpVersion
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpVersion specifies the IMA Version for
this group."
DEFVAL { oneDotOne }
::= { tmnxBundleImaGrpEntry 28 }
tmnxBundleImaGrpMaxConfBw OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpMaxConfBw specifies the number of links
that is used to determine the maximum configurable
bandwidth that is allowed to be used for this IMA group."
DEFVAL { 8 }
::= { tmnxBundleImaGrpEntry 29 }
tmnxBundleImaGrpTestState OBJECT-TYPE
SYNTAX TmnxImaTestState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTestState specifies the current state of
the test pattern procedure. A value of 'disabled' specifies
that the group is currently not running. A value of
'operating' enables the test pattern procedure. The test
pattern procedure continues until it is 'disabled'."
DEFVAL { disabled }
::= { tmnxBundleImaGrpEntry 30 }
tmnxBundleImaGrpTestMember OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTestMember specifies a member link to
be used for the test pattern procedure. A value of zero
indicates that no member link has been selected.
When tmnxBundleImaGrpTestState does not have the value
'disabled', an attempt to set this object will be
rejected with an inconsistentValue error."
DEFVAL { 0 }
::= { tmnxBundleImaGrpEntry 31 }
tmnxBundleImaGrpTestPattern OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleImaGrpTestPattern specifies the Transmit Test
Pattern in an IMA group loopback operation. This value
may only be changed when tmnxBundleImaGrpTestState is
'disabled'."
DEFVAL { 0 }
::= { tmnxBundleImaGrpEntry 32 }
tmnxBundleImaGrpDiffDelayMaxObs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpDiffDelayMaxObs indicates the latest
maximum differential delay observed between links
having the least and most link propagation delay
among the received links configured in this IMA group."
::= { tmnxBundleImaGrpEntry 33 }
tmnxBundleImaGrpLeastDelayLink OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleImaGrpLeastDelayLink indicates a member link
which has the smallest link propagation delay. If this
delay has yet to be determined or no member link has
been configured, a value of zero is returned."
::= { tmnxBundleImaGrpEntry 34 }
--
-- IMA Group Member Table
--
-- Sparse Dependent Extension of the tmnxBundleMemberTable.
--
-- The same indexes are used for both the base table tmnxBundleMemberTable,
-- and the sparse dependent table, tmnxBundleMemberImaTable.
--
-- This in effect extends the tmnxBundleMemberTable with additional columns.
-- Rows are created in the tmnxBundleMemberImaTable only for those entries
-- in the tmnxBundleMemberTable that were created and have a value of 'imagrp'
-- for the bundle type.
--
-- Deletion of a row in the tmnxBundleMemberTable results in the
-- same fate for the row in the tmnxBundleMemberImaTable.
--
tmnxBundleMemberImaTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxBundleMemberImaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxBundleMemberImaTable has an entry for an
IMA link associated with an IMA Group."
::= { tmnxPortObjs 22 }
tmnxBundleMemberImaEntry OBJECT-TYPE
SYNTAX TmnxBundleMemberImaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an IMA link associated with
an IMA Group."
INDEX { tmnxBundleBundleID, tmnxPortPortID }
::= { tmnxBundleMemberImaTable 1 }
TmnxBundleMemberImaEntry ::=
SEQUENCE {
tmnxBundleMemberImaNeTxState TmnxImaLnkState,
tmnxBundleMemberImaNeRxState TmnxImaLnkState,
tmnxBundleMemberImaFeTxState TmnxImaLnkState,
tmnxBundleMemberImaFeRxState TmnxImaLnkState,
tmnxBundleMemberImaNeRxFailState TmnxImaLnkFailState,
tmnxBundleMemberImaFeRxFailState TmnxImaLnkFailState,
tmnxBundleMemberImaTxLid INTEGER,
tmnxBundleMemberImaRxLid INTEGER,
tmnxBundleMemberImaViolations Counter32,
tmnxBundleMemberImaNeSevErrSecs Counter32,
tmnxBundleMemberImaFeSevErrSecs Counter32,
tmnxBundleMemberImaNeUnavailSecs Counter32,
tmnxBundleMemberImaFeUnavailSecs Counter32,
tmnxBundleMemberImaNeTxUnuseSecs Counter32,
tmnxBundleMemberImaNeRxUnuseSecs Counter32,
tmnxBundleMemberImaFeTxUnuseSecs Counter32,
tmnxBundleMemberImaFeRxUnuseSecs Counter32,
tmnxBundleMemberImaNeTxNumFails Counter32,
tmnxBundleMemberImaNeRxNumFails Counter32,
tmnxBundleMemberImaFeTxNumFails Counter32,
tmnxBundleMemberImaFeRxNumFails Counter32,
tmnxBundleMemberImaTxIcpCells Counter32,
tmnxBundleMemberImaRxIcpCells Counter32,
tmnxBundleMemberImaErrorIcpCells Counter32,
tmnxBundleMemberImaLstRxIcpCells Counter32,
tmnxBundleMemberImaOifAnomalies Counter32,
tmnxBundleMemberImaRxTestState TmnxImaTestState,
tmnxBundleMemberImaRxTestPattern INTEGER,
tmnxBundleMemberImaRelDelay Unsigned32
}
tmnxBundleMemberImaNeTxState OBJECT-TYPE
SYNTAX TmnxImaLnkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeTxState indicates the state of near-end
transmit IMA link."
::= { tmnxBundleMemberImaEntry 1 }
tmnxBundleMemberImaNeRxState OBJECT-TYPE
SYNTAX TmnxImaLnkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeRxState indicates the state of near-end
receive IMA link."
::= { tmnxBundleMemberImaEntry 2 }
tmnxBundleMemberImaFeTxState OBJECT-TYPE
SYNTAX TmnxImaLnkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeTxState indicates the state of far-end
transmit IMA link."
::= { tmnxBundleMemberImaEntry 3 }
tmnxBundleMemberImaFeRxState OBJECT-TYPE
SYNTAX TmnxImaLnkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeRxState indicates the state of far-end
receive IMA link."
::= { tmnxBundleMemberImaEntry 4 }
tmnxBundleMemberImaNeRxFailState OBJECT-TYPE
SYNTAX TmnxImaLnkFailState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeRxFailState indicates the IMA link failure
reason for the near-end."
::= { tmnxBundleMemberImaEntry 5 }
tmnxBundleMemberImaFeRxFailState OBJECT-TYPE
SYNTAX TmnxImaLnkFailState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeRxFailState indicates the IMA link failure
reason for the far-end."
::= { tmnxBundleMemberImaEntry 6 }
tmnxBundleMemberImaTxLid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaTxLid indicates the Link Identifier
assigned to the transmit IMA link."
::= { tmnxBundleMemberImaEntry 7 }
tmnxBundleMemberImaRxLid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaRxLid indicates the Link Identifier
used on the receive IMA link."
::= { tmnxBundleMemberImaEntry 8 }
tmnxBundleMemberImaViolations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaViolations indicates the number of
ICP violations including errored, invalid or missing ICP
cells."
::= { tmnxBundleMemberImaEntry 9 }
tmnxBundleMemberImaNeSevErrSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeSevErrSecs indicates the number
of one second intervals in which thirty percent or
more of the near-end ICP cells are in violation, or
link defects have occurred."
::= { tmnxBundleMemberImaEntry 10 }
tmnxBundleMemberImaFeSevErrSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeSevErrSecs indicates the number
of one second intervals in which the far-end contains
IMA-RDI defects."
::= { tmnxBundleMemberImaEntry 11 }
tmnxBundleMemberImaNeUnavailSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeUnavailSecs indicates the number
of unavailable seconds at the near-end."
::= { tmnxBundleMemberImaEntry 12 }
tmnxBundleMemberImaFeUnavailSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeUnavailSecs indicates the number
of unavailable seconds at the near-end."
::= { tmnxBundleMemberImaEntry 13 }
tmnxBundleMemberImaNeTxUnuseSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeTxUnuseSecs indicates the number
of unavailable seconds at the near-end transmit link
state machine."
::= { tmnxBundleMemberImaEntry 14 }
tmnxBundleMemberImaNeRxUnuseSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeRxUnuseSecs indicates the number
of unavailable seconds at the near-end receive link
state machine."
::= { tmnxBundleMemberImaEntry 15 }
tmnxBundleMemberImaFeTxUnuseSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeTxUnuseSecs indicates the number
of unavailable seconds at the far-end transmit link
state machine."
::= { tmnxBundleMemberImaEntry 16 }
tmnxBundleMemberImaFeRxUnuseSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeRxUnuseSecs indicates the number
of unavailable seconds at the far-end receive link
state machine."
::= { tmnxBundleMemberImaEntry 17 }
tmnxBundleMemberImaNeTxNumFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeTxNumFails indicates the number
of times that a near-end transmit alarm is set on the
IMA link."
::= { tmnxBundleMemberImaEntry 18 }
tmnxBundleMemberImaNeRxNumFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaNeRxNumFails indicates the number
of times that a near-end receive alarm is set on the
IMA link."
::= { tmnxBundleMemberImaEntry 19 }
tmnxBundleMemberImaFeTxNumFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeTxNumFails indicates the number
of times that a far-end transmit alarm is set on the
IMA link."
::= { tmnxBundleMemberImaEntry 20 }
tmnxBundleMemberImaFeRxNumFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaFeRxNumFails indicates the number
of times that a far-end receive alarm is set on the
IMA link."
::= { tmnxBundleMemberImaEntry 21 }
tmnxBundleMemberImaTxIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaTxIcpCells indicates the number
of ICP cells that have been transmitted on the IMA
link."
::= { tmnxBundleMemberImaEntry 22 }
tmnxBundleMemberImaRxIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaRxIcpCells indicates the number
of ICP cells that have been received on the IMA
link."
::= { tmnxBundleMemberImaEntry 23 }
tmnxBundleMemberImaErrorIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaErrorIcpCells indicates the number
of ICP cells with HEC or CRC-10 errors."
::= { tmnxBundleMemberImaEntry 24 }
tmnxBundleMemberImaLstRxIcpCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaLstRxIcpCells indicates the number
of lost ICP cells at the expected offset."
::= { tmnxBundleMemberImaEntry 25 }
tmnxBundleMemberImaOifAnomalies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaOifAnomalies indicates the number
of OIF anomalies at the near-end."
::= { tmnxBundleMemberImaEntry 26 }
tmnxBundleMemberImaRxTestState OBJECT-TYPE
SYNTAX TmnxImaTestState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaRxTestState indicates the current
state of the test pattern on this link."
::= { tmnxBundleMemberImaEntry 27 }
tmnxBundleMemberImaRxTestPattern OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaRxTestPattern indicates the received
test pattern value on this link."
::= { tmnxBundleMemberImaEntry 28 }
tmnxBundleMemberImaRelDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBundleMemberImaRelDelay indicates the latest measured
delay on this member link relative to the member link with
the least delay within the same IMA group"
::= { tmnxBundleMemberImaEntry 29 }
--
-- L4 Load Balancing
--
tmnxPortScalarObjs OBJECT IDENTIFIER ::= { tmnxPortObjs 19 }
tmnxL4LoadBalancing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxL4LoadBalancing specifies whether layer 4 information,
src and dst ports, should be used in the LAG and ECMP hashing
algorithm. This is the global system setting that all ports will
inherit. When set to 'true', src and dst ports are used in the hashing
algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can
override tmnxL4LoadBalancing."
DEFVAL { false }
::= { tmnxPortScalarObjs 1}
--
-- DS1 Port table
--
tmnxDS1PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDS1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDS1PortTable has an entry for a DS1 physical port."
::= { tmnxPortObjs 23 }
tmnxDS1PortEntry OBJECT-TYPE
SYNTAX TmnxDS1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a physical DS1 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to the DS1 MDA type The tmnxDS1PortEntry contains attributes
that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID
contains the slot, mda and port numbers encoded into it.
For each tmnxDS1PortEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxDS1PortTable 1 }
TmnxDS1PortEntry ::=
SEQUENCE {
tmnxDS1PortBuildout INTEGER,
tmnxDS1PortLastChangeTime TimeStamp,
tmnxDS1PortType INTEGER,
tmnxDS1PortLineLength INTEGER,
tmnxDS1PortLbo INTEGER,
tmnxDS1PortDbGain Integer32
}
tmnxDS1PortBuildout OBJECT-TYPE
SYNTAX INTEGER {
short (1),
long (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1PortBuildout configures the cable buildout length. A ds1 port
has two settings for the DS1 cable buildout: a 'short' setting, for
cable lengths of less than or equal to 655 feet, and a 'long' setting
for cable lengths of greater than 655 feet.
This object applies to copper-cable-based DS1 ports only."
DEFVAL { short }
::= { tmnxDS1PortEntry 1 }
tmnxDS1PortLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tmnxDS1PortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS1PortEntry row for this port."
::= { tmnxDS1PortEntry 2 }
tmnxDS1PortType OBJECT-TYPE
SYNTAX INTEGER {
ds1(1),
e1 (2),
j1 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1PortType configures the type of the physical port to 'ds1',
'e1' or 'j1'."
DEFVAL { ds1 }
::= { tmnxDS1PortEntry 3 }
tmnxDS1PortLineLength OBJECT-TYPE
SYNTAX INTEGER {
lengthNotApplicable (1),
length0To133 (2),
length134To266 (3),
length267To399 (4),
length400To533 (5),
length534To655 (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1PortLineLength configuration only applies to a ds1 port
configured with a 'short' buildout. tmnxDS1PortLineLength configures
the length of the line (in feet). For line lengths longer than 655
feet configure the ds1 port buildout as 'long'.
For 'long' buildout the following values are valid:
lengthNotApplicable - Not applicable
For 'short' buildout the following values are valid:
length0To133 - For line length from 0 to 133 feet
length134To266 - For line length from 134 to 266 feet
length267To399 - For line length from 267 to 399 feet
length400To533 - For line length from 400 to 533 feet
length534To655 - For line length from 534 to 655 feet
The default for 'long' buildout is 'lengthNotApplicable' while the
default for 'short' buildout is 'length0To133'."
::= { tmnxDS1PortEntry 4 }
tmnxDS1PortLbo OBJECT-TYPE
SYNTAX INTEGER {
lboNotApplicable (1),
lbo0dB (2),
lboNeg7p5dB (3),
lboNeg15p0dB (4),
lboNeg22p5dB (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxDS1PortLbo configuration only applies to a ds1 port
configured with a 'long' buildout. tmnxDS1PortLbo configures the
number of decibels(dB) the transmission signal decreases over the line.
For 'short' buildout the following values are valid:
lboNotApplicable - Not applicable
For 'long' buildout the following values are valid:
lbo0dB - For 0 dB
lboNeg7p5dB - For -7.5 dB
lboNeg15p0dB - For -15.0 dB
lboNeg22p5dB - For -22.5 dB
The default for 'short' build out is 'lboNotApplicable' while the
default for 'long' buildout is 'lbo0dB'"
::= { tmnxDS1PortEntry 5 }
tmnxDS1PortDbGain OBJECT-TYPE
SYNTAX Integer32
UNITS "db"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxDS1PortDbGain only applies to a ds1 port configured with a
'long' buildout. tmnxDS1PortDbGain shows the number of decibels
the received signal is increased to compensate for loss."
::= { tmnxDS1PortEntry 6 }
--
-- Port scheduler policy overrides
--
tmnxPortSchedOverrideTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxPortSchedOverrideEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxPortSchedOverrideTable has an entry for each port
scheduler override configured on this system."
::= { tmnxPortObjs 24 }
tmnxPortSchedOverrideEntry OBJECT-TYPE
SYNTAX TmnxPortSchedOverrideEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a particular port-scheduler override. Entries
are created and deleted by the user."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxPortSchedOverrideTable 1}
TmnxPortSchedOverrideEntry ::= SEQUENCE
{
tmnxPortSchedOverrideRowStatus RowStatus,
tmnxPortSchedOverrideSchedName DisplayString,
tmnxPortSchedOverrideLastChanged TimeStamp,
tmnxPortSchedOverrideMaxRate TPortSchedulerPIR,
tmnxPortSchedOverrideLvl1PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl1CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl2PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl2CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl3PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl3CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl4PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl4CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl5PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl5CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl6PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl6CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl7PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl7CIR TPortSchedulerCIR,
tmnxPortSchedOverrideLvl8PIR TPortSchedulerPIR,
tmnxPortSchedOverrideLvl8CIR TPortSchedulerCIR,
tmnxPortSchedOverrideFlags BITS
}
tmnxPortSchedOverrideRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideRowStatus is used for the
creation and deletion of port-scheduler overrides. When
tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the
same indices of this table is an empty string, creation
will fail."
::= { tmnxPortSchedOverrideEntry 1 }
tmnxPortSchedOverrideSchedName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideSchedName indicates the name
of the port scheduler policy that this row entry overrides."
::= { tmnxPortSchedOverrideEntry 2 }
tmnxPortSchedOverrideLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row."
::= { tmnxPortSchedOverrideEntry 3 }
tmnxPortSchedOverrideMaxRate OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideMaxRate specifies the explicit
maximum frame based bandwidth limit. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 4 }
tmnxPortSchedOverrideLvl1PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl1PIR specifies the total
bandwidth limit, PIR, for priority level 1. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 5 }
tmnxPortSchedOverrideLvl1CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir
bandwidth limit for priority level 1. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 6 }
tmnxPortSchedOverrideLvl2PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl2PIR specifies the total
bandwidth limit, PIR, for priority level 2. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 7 }
tmnxPortSchedOverrideLvl2CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir
bandwidth limit for priority level 2. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 8 }
tmnxPortSchedOverrideLvl3PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl3PIR specifies the total
bandwidth limit, PIR, for priority level 3. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 9 }
tmnxPortSchedOverrideLvl3CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir
bandwidth limit for priority level 3. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 10 }
tmnxPortSchedOverrideLvl4PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl4PIR specifies the total
bandwidth limit, PIR, for priority level 4. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 11 }
tmnxPortSchedOverrideLvl4CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir
bandwidth limit for priority level 4. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 12 }
tmnxPortSchedOverrideLvl5PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl5PIR specifies the total
bandwidth limit, PIR, for priority level 5. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 13 }
tmnxPortSchedOverrideLvl5CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir
bandwidth limit for priority level 5. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 14 }
tmnxPortSchedOverrideLvl6PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl6PIR specifies the total
bandwidth limit, PIR, for priority level 6. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 15 }
tmnxPortSchedOverrideLvl6CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir
bandwidth limit for priority level 6. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 16 }
tmnxPortSchedOverrideLvl7PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl7PIR specifies the total
bandwidth limit, PIR, for priority level 7. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 17 }
tmnxPortSchedOverrideLvl7CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir
bandwidth limit for priority level 7. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 18 }
tmnxPortSchedOverrideLvl8PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl8PIR specifies the total
bandwidth limit, PIR, for priority level 8. This object
overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 19 }
tmnxPortSchedOverrideLvl8CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir
bandwidth limit for priority level 8. This object overrides
ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR."
DEFVAL { -1 }
::= { tmnxPortSchedOverrideEntry 20 }
tmnxPortSchedOverrideFlags OBJECT-TYPE
SYNTAX BITS {
maxRate(0),
lvl1PIR(1),
lvl1CIR(2),
lvl2PIR(3),
lvl2CIR(4),
lvl3PIR(5),
lvl3CIR(6),
lvl4PIR(7),
lvl4CIR(8),
lvl5PIR(9),
lvl5CIR(10),
lvl6PIR(11),
lvl6CIR(12),
lvl7PIR(13),
lvl7CIR(14),
lvl8PIR(15),
lvl8CIR(16)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxPortSchedOverrideFlags specifies the set of
attributes whose values have been overridden via management
on this port scheduler. Clearing a given flag will return the
corresponding overridden attribute to the value defined in
the port's port-scheduler policy."
::= { tmnxPortSchedOverrideEntry 21 }
--
-- Bundle Protection Group Association Table
--
tmnxBPGrpAssocTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxBPGrpAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created
on the system."
::= { tmnxPortObjs 25 }
tmnxBPGrpAssocEntry OBJECT-TYPE
SYNTAX TmnxBPGrpAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row displays the relationship between a Bundle Protection
group and its working and protection bundle."
INDEX { tmnxChassisIndex, tmnxBundleBundleID }
::= { tmnxBPGrpAssocTable 1 }
TmnxBPGrpAssocEntry ::=
SEQUENCE {
tmnxBPGrpAssocWorkingBundleID TmnxBundleID,
tmnxBPGrpAssocProtectBundleID TmnxBundleID,
tmnxBPGrpAssocActiveBundleID TmnxBundleID
}
tmnxBPGrpAssocWorkingBundleID OBJECT-TYPE
SYNTAX TmnxBundleID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value
of zero is given if no working bundle is associated with the given
tmnxBundleBundleID."
::= { tmnxBPGrpAssocEntry 1 }
tmnxBPGrpAssocProtectBundleID OBJECT-TYPE
SYNTAX TmnxBundleID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value
of zero is given if no protection bundle is associated with the given
tmnxBundleBundleID."
::= { tmnxBPGrpAssocEntry 2 }
tmnxBPGrpAssocActiveBundleID OBJECT-TYPE
SYNTAX TmnxBundleID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tmnxBPGrpAssocActiveBundleID identifies the bundle that is considered
the active bundle. This bundle contains the members that are part of the
active aps port. A value of zero is given if no bundle is considered active."
::= { tmnxBPGrpAssocEntry 3 }
--
-- MLPPP Bundle Table
--
-- Sparse Dependent Extension of the tmnxBundleTable.
--
-- The same indexes are used for both the base table tmnxBundleTable,
-- and the sparse dependent table, tmnxBundleMlpppTable.
--
-- This in effect extends the tmnxBundleTable with additional columns.
-- Rows are created in the tmnxBundleMlpppTable only for those entries
-- in the tmnxBundleTable for a value of 'mlppp' for the bundle type.
--
-- Deletion of a row in the tmnxBundleTable results in the
-- same fate for the row in the tmnxBundleMlpppTable.
--
tmnxBundleMlpppTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxBundleMlpppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxBundleMlpppTable contains MLPPP specific data."
::= { tmnxPortObjs 26 }
tmnxBundleMlpppEntry OBJECT-TYPE
SYNTAX TmnxBundleMlpppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains data on an MLPPP Bundle."
INDEX { tmnxChassisIndex, tmnxBundleBundleID }
::= { tmnxBundleMlpppTable 1 }
TmnxBundleMlpppEntry ::=
SEQUENCE {
tmnxBundleMlpppEndpointID OCTET STRING,
tmnxBundleMlpppEndpointIDClass TmnxMlpppEndpointIdClass,
tmnxBundleMlpppClassCount INTEGER,
tmnxBundleMlpppIngQoSProfId TMlpppQoSProfileId,
tmnxBundleMlpppEgrQoSProfId TMlpppQoSProfileId
}
tmnxBundleMlpppEndpointID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator
identifier value within the specified tmnxBundleMlpppEndpointIDClass.
The object tmnxPortAdminStatus must be set to 'outOfService' to
change this value."
::= { tmnxBundleMlpppEntry 1 }
tmnxBundleMlpppEndpointIDClass OBJECT-TYPE
SYNTAX TmnxMlpppEndpointIdClass
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMlpppEndpointIDClass specifies the Link Control
Protocol Endpoint Descriminator Class field type of the
tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus
must be set to 'outOfService' to change this value.
Bundle DEFVAL
Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3)
MLPPP Bundle Protection Group ipAddress (2)
"
::= { tmnxBundleMlpppEntry 2 }
tmnxBundleMlpppClassCount OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxBundleMlpppClassCount specifies
whether Multiclass MLPPP is enabled on
a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the
number of classes to be negotiated/supported over the MLPPP bundle.
The value of 0 disables multiclass MLPPP including negotiation in
the PPP protocol.
All other values specify the number of classes to be supported
on a given multiclass bundle and enable Multiclass MLPPP negotiation
on that bundle.
Non-zero values supported are platform/MDA specific.
The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be
changed when LFI is enabled on the bundle (see tmnxBundleLFI object
in tmnxBundleTable).
The value of tmnxBundleMlpppClassCount may be modified only when
tmnxBundleNumLinks is zero.
To set the value of tmnxBundleMlpppClassCount to a value greater
than 4, the long sequence format must be enabled on the bundle (see
tmnxBundleShortSequence object in tmnxBundleTable).
Changing the value of tmnxBundleMlpppClassCount resets the values of
tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their
defaults"
DEFVAL { 0 }
::= { tmnxBundleMlpppEntry 3 }
tmnxBundleMlpppIngQoSProfId OBJECT-TYPE
SYNTAX TMlpppQoSProfileId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMlpppIngQoSProfId specifies ingress QoS profile
to be used for the incoming traffic over this MLPPP
bundle.
The value of tmnxBundleMlpppIngQoSProfId may be modified only
when the value of tmnxBundleNumLinks is 0.
The value of tmnxBundleMlpppIngQoSProfId of 0 indicates
a default QoS profile is used as applicable to a given H/W and
the configured value of tmnxBundleMlpppClassCount."
DEFVAL { 0 }
::= { tmnxBundleMlpppEntry 4 }
tmnxBundleMlpppEgrQoSProfId OBJECT-TYPE
SYNTAX TMlpppQoSProfileId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tmnxBundleMlpppEgrQoSProfId specifies egress QoS profile
to be used for the outgoing traffic over this MLPPP
bundle.
The value of tmnxBundleMlpppEgrQoSProfId may be modified only
when tmnxBundleNumLinks is zero.
The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates
a default profile is used as applicable to a given H/W and
the configured value of tmnxBundleMlpppClassCount."
DEFVAL { 0 }
::= { tmnxBundleMlpppEntry 5 }
--
-- Digital Diagnostic Monitor Table
--
tmnxDigitalDiagMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDigitalDiagMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the
system that supports Digital Diagnostic Monitoring (DDM). The table is
indexed by TmnxPortID. Each row in this table is dynamically added
and removed internally by the system based on the presence or absence
of DDM capable SFP/XFP components."
::= { tmnxPortObjs 31 }
tmnxDigitalDiagMonitorEntry OBJECT-TYPE
SYNTAX TmnxDigitalDiagMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a particular SFP/XFP that supports Digital
Diagnostic Monitoring.
Entries are created and deleted internally by the system."
INDEX { tmnxChassisIndex, tmnxPortPortID }
::= { tmnxDigitalDiagMonitorTable 1}
TmnxDigitalDiagMonitorEntry ::= SEQUENCE
{
tmnxDDMTemperature Integer32,
tmnxDDMTempLowWarning Integer32,
tmnxDDMTempLowAlarm Integer32,
tmnxDDMTempHiWarning Integer32,
tmnxDDMTempHiAlarm Integer32,
tmnxDDMSupplyVoltage Integer32,
tmnxDDMSupplyVoltageLowWarning Integer32,
tmnxDDMSupplyVoltageLowAlarm Integer32,
tmnxDDMSupplyVoltageHiWarning Integer32,
tmnxDDMSupplyVoltageHiAlarm Integer32,
tmnxDDMTxBiasCurrent Integer32,
tmnxDDMTxBiasCurrentLowWarning Integer32,
tmnxDDMTxBiasCurrentLowAlarm Integer32,
tmnxDDMTxBiasCurrentHiWarning Integer32,
tmnxDDMTxBiasCurrentHiAlarm Integer32,
tmnxDDMTxOutputPower Integer32,
tmnxDDMTxOutputPowerLowWarning Integer32,
tmnxDDMTxOutputPowerLowAlarm Integer32,
tmnxDDMTxOutputPowerHiWarning Integer32,
tmnxDDMTxOutputPowerHiAlarm Integer32,
tmnxDDMRxOpticalPower Integer32,
tmnxDDMRxOpticalPowerLowWarning Integer32,
tmnxDDMRxOpticalPowerLowAlarm Integer32,
tmnxDDMRxOpticalPowerHiWarning Integer32,
tmnxDDMRxOpticalPowerHiAlarm Integer32,
tmnxDDMRxOpticalPowerType INTEGER,
tmnxDDMAux1 Integer32,
tmnxDDMAux1LowWarning Integer32,
tmnxDDMAux1LowAlarm Integer32,
tmnxDDMAux1HiWarning Integer32,
tmnxDDMAux1HiAlarm Integer32,
tmnxDDMAux1Type INTEGER,
tmnxDDMAux2 Integer32,
tmnxDDMAux2LowWarning Integer32,
tmnxDDMAux2LowAlarm Integer32,
tmnxDDMAux2HiWarning Integer32,
tmnxDDMAux2HiAlarm Integer32,
tmnxDDMAux2Type INTEGER,
tmnxDDMFailedThresholds BITS,
tmnxDDMExternallyCalibrated TruthValue,
tmnxDDMExtCalRxPower4 Unsigned32,
tmnxDDMExtCalRxPower3 Unsigned32,
tmnxDDMExtCalRxPower2 Unsigned32,
tmnxDDMExtCalRxPower1 Unsigned32,
tmnxDDMExtCalRxPower0 Unsigned32,
tmnxDDMExtCalTxLaserBiasSlope Unsigned32,
tmnxDDMExtCalTxLaserBiasOffset Integer32,
tmnxDDMExtCalTxPowerSlope Unsigned32,
tmnxDDMExtCalTxPowerOffset Integer32,
tmnxDDMExtCalTemperatureSlope Unsigned32,
tmnxDDMExtCalTemperatureOffset Integer32,
tmnxDDMExtCalVoltageSlope Unsigned32,
tmnxDDMExtCalVoltageOffset Integer32
}
tmnxDDMTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTemperature indicates the current temperature
of the SFP/XFP in degrees Celsius."
::= { tmnxDigitalDiagMonitorEntry 1 }
tmnxDDMTempLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTempLowWarning indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a low-warning."
::= { tmnxDigitalDiagMonitorEntry 2 }
tmnxDDMTempLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTempLowAlarm indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a low-alarm."
::= { tmnxDigitalDiagMonitorEntry 3 }
tmnxDDMTempHiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTempHiWarning indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a hi-warning."
::= { tmnxDigitalDiagMonitorEntry 4 }
tmnxDDMTempHiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTempHiAlarm indicates the temperature
of the SFP/XFP in degrees Celsius that triggers a hi-alarm."
::= { tmnxDigitalDiagMonitorEntry 5 }
tmnxDDMSupplyVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMSupplyVoltage indicates the current supply
voltage of the SFP/XFP in micro-Volts (uV)."
::= { tmnxDigitalDiagMonitorEntry 6 }
tmnxDDMSupplyVoltageLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning."
::= { tmnxDigitalDiagMonitorEntry 7 }
tmnxDDMSupplyVoltageLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm."
::= { tmnxDigitalDiagMonitorEntry 8 }
tmnxDDMSupplyVoltageHiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning."
::= { tmnxDigitalDiagMonitorEntry 9 }
tmnxDDMSupplyVoltageHiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm."
::= { tmnxDigitalDiagMonitorEntry 10 }
tmnxDDMTxBiasCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA)."
::= { tmnxDigitalDiagMonitorEntry 11 }
tmnxDDMTxBiasCurrentLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a
low-warning."
::= { tmnxDigitalDiagMonitorEntry 12 }
tmnxDDMTxBiasCurrentLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a
low-alarm."
::= { tmnxDigitalDiagMonitorEntry 13 }
tmnxDDMTxBiasCurrentHiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a
hi-warning."
::= { tmnxDigitalDiagMonitorEntry 14 }
tmnxDDMTxBiasCurrentHiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a
hi-alarm."
::= { tmnxDigitalDiagMonitorEntry 15 }
tmnxDDMTxOutputPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxOutputPower indicates the current Output
Power of the SFP/XFP in micro-Watts (uW)."
::= { tmnxDigitalDiagMonitorEntry 16 }
tmnxDDMTxOutputPowerLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a low-warning."
::= { tmnxDigitalDiagMonitorEntry 17 }
tmnxDDMTxOutputPowerLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm."
::= { tmnxDigitalDiagMonitorEntry 18 }
tmnxDDMTxOutputPowerHiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm."
::= { tmnxDigitalDiagMonitorEntry 19 }
tmnxDDMTxOutputPowerHiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm."
::= { tmnxDigitalDiagMonitorEntry 20 }
tmnxDDMRxOpticalPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in micro-Watts (uW)."
::= { tmnxDigitalDiagMonitorEntry 21 }
tmnxDDMRxOpticalPowerLowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a
low-warning."
::= { tmnxDigitalDiagMonitorEntry 22 }
tmnxDDMRxOpticalPowerLowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a
low-alarm."
::= { tmnxDigitalDiagMonitorEntry 23 }
tmnxDDMRxOpticalPowerHiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a
hi-warning."
::= { tmnxDigitalDiagMonitorEntry 24 }
tmnxDDMRxOpticalPowerHiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a
hi-alarm."
::= { tmnxDigitalDiagMonitorEntry 25 }
tmnxDDMRxOpticalPowerType OBJECT-TYPE
SYNTAX INTEGER {
oma (0), -- Optical Modulation Amplitude
average (1) -- Average rx optical power
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMRxOpticalPowerType indicates whether the
tmnxDDMRxOpticalPower was taken as an average, or as an Optical
Modulation Amplitude (OMA)."
::= { tmnxDigitalDiagMonitorEntry 26 }
tmnxDDMAux1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux1 indicates the Manufacturer specific
Auxiliary 1 information of the XFP."
::= { tmnxDigitalDiagMonitorEntry 27 }
tmnxDDMAux1LowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux1LowWarning indicates the Manufacturer specific
Auxiliary 1 low-warning threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 28 }
tmnxDDMAux1LowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific
Auxiliary 1 low-alarm threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 29 }
tmnxDDMAux1HiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux1HiWarning indicates the Manufacturer specific
Auxiliary 1 hi-warning threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 30 }
tmnxDDMAux1HiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific
Auxiliary 1 hi-alarm threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 31 }
tmnxDDMAux1Type OBJECT-TYPE
SYNTAX INTEGER {
none (0),
adp-bias-voltage (1),
reserved-2 (2),
tec-current (3),
laser-temp (4),
laser-wavelength (5),
voltage-50 (6),
voltage-33 (7),
voltage-18 (8),
voltage-52 (9),
current-50 (10),
reserved-11 (11),
reserved-12 (12),
current-33 (13),
current-18 (14),
current-52 (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux1Type indicates the measurement type of
the Manufacturer specific Auxiliary 1 information of the XFP:
none (0) - not specified.
adp-bias-voltage (1) - LSB is 10mV.
reserved-2 (2) - reserved for future use.
tec-current (3) - LSB is 100uA.
laser-temp (4) - degrees Celsius(C).
laser-wavelength (5) - LSB is 0.05 nm.
voltage-50 (6) - 5.0 supply voltage, LSB=100uV.
voltage-33 (7) - 3.3 supply voltage, LSB=100uV.
voltage-18 (8) - 1.8 supply voltage, LSB=100uV,
voltage-52 (9) - -5.2 supply voltage, LSB=100uV.
current-50 (10) - 5.0V supply current, LSB=100uA.
reserved-11 (11) - reserved for future use.
reserved-12 (12) - reserved for future use.
current-33 (13) - 3.3V supply current, LSB=100uA.
current-18 (14) - 1.8V supply current, LSB=100uA.
current-52 (15) - -5.2V supply current, LSB=100uA."
::= { tmnxDigitalDiagMonitorEntry 32 }
tmnxDDMAux2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux2 indicates the Manufacturer specific
Auxiliary 2 information of the SFP/XFP."
::= { tmnxDigitalDiagMonitorEntry 33 }
tmnxDDMAux2LowWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux2LowWarning indicates the Manufacturer specific
Auxiliary 2 low-warning threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 34 }
tmnxDDMAux2LowAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific
Auxiliary 2 low-alarm threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 35 }
tmnxDDMAux2HiWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux2HiWarning indicates the Manufacturer specific
Auxiliary 2 hi-warning threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 36 }
tmnxDDMAux2HiAlarm OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific
Auxiliary 2 hi-alarm threshold for the XFP."
::= { tmnxDigitalDiagMonitorEntry 37 }
tmnxDDMAux2Type OBJECT-TYPE
SYNTAX INTEGER {
none (0),
adp-bias-voltage (1),
reserved-2 (2),
tec-current (3),
laser-temp (4),
laser-wavelength (5),
voltage-50 (6),
voltage-33 (7),
voltage-18 (8),
voltage-52 (9),
current-50 (10),
reserved-11 (11),
reserved-12 (12),
current-33 (13),
current-18 (14),
current-52 (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMAux2Type indicates the measurement type of
the Manufacturer specific Auxiliary 2 information of the XFP:
none (0) - not specified.
adp-bias-voltage (1) - LSB is 10mV.
reserved-2 (2) - reserved for future use.
tec-current (3) - LSB is 100uA.
laser-temp (4) - degrees Celsius(C).
laser-wavelength (5) - LSB is 0.05 nm.
voltage-50 (6) - 5.0 supply voltage, LSB=100uV.
voltage-33 (7) - 3.3 supply voltage, LSB=100uV.
voltage-18 (8) - 1.8 supply voltage, LSB=100uV,
voltage-52 (9) - -5.2 supply voltage, LSB=100uV.
current-50 (10) - 5.0V supply current, LSB=100uA.
reserved-11 (11) - reserved for future use.
reserved-12 (12) - reserved for future use.
current-33 (13) - 3.3V supply current, LSB=100uA.
current-18 (14) - 1.8V supply current, LSB=100uA.
current-52 (15) - -5.2V supply current, LSB=100uA."
::= { tmnxDigitalDiagMonitorEntry 38 }
tmnxDDMFailedThresholds OBJECT-TYPE
SYNTAX BITS {
unknown (0),
temperature-low-warning (1),
temperature-low-alarm (2),
temperature-high-warning (3),
temperature-high-alarm (4),
supplyVoltage-low-warning (5),
supplyVoltage-low-alarm (6),
supplyVoltage-high-warning (7),
supplyVoltage-high-alarm (8),
txBiasCurrent-low-warning (9),
txBiasCurrent-low-alarm (10),
txBiasCurrent-high-warning (11),
txBiasCurrent-high-alarm (12),
txOutputPower-low-warning (13),
txOutputPower-low-alarm (14),
txOutputPower-high-warning (15),
txOutputPower-high-alarm (16),
rxOpticalPower-low-warning (17),
rxOpticalPower-low-alarm (18),
rxOpticalPower-high-warning (19),
rxOpticalPower-high-alarm (20),
aux1-low-warning (21),
aux1-low-alarm (22),
aux1-high-warning (23),
aux1-high-alarm (24),
aux2-low-warning (25),
aux2-low-alarm (26),
aux2-high-warning (27),
aux2-high-alarm (28)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMFailedThresholds indicates which objects
of the monitored SFP/XFP is in a failed or cleared threshold state.
A set bit indicates that the specified threshold has been exceeded."
::= { tmnxDigitalDiagMonitorEntry 39 }
tmnxDDMExternallyCalibrated OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExternallyCalibrated indicates whether the
SFP was externally calibrated (true) or internally calibrated (false)."
::= { tmnxDigitalDiagMonitorEntry 40 }
tmnxDDMExtCalRxPower4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 41 }
tmnxDDMExtCalRxPower3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8462 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 42 }
tmnxDDMExtCalRxPower2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 43 }
tmnxDDMExtCalRxPower1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 44 }
tmnxDDMExtCalRxPower0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 45 }
tmnxDDMExtCalTxLaserBiasSlope OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalTxLaserBiasSlope indicates the
Tx_l(Slope) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 46 }
tmnxDDMExtCalTxLaserBiasOffset OBJECT-TYPE
SYNTAX Integer32 (-32767..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalTxLaserBiasOffset indicates the
Tx_l(Offset) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 47 }
tmnxDDMExtCalTxPowerSlope OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalTxPowerSlope indicates the
Tx_PWR(Slope) value as specified in Table 3.16 in the
SFF Committee Standard's document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 48 }
tmnxDDMExtCalTxPowerOffset OBJECT-TYPE
SYNTAX Integer32 (-32767..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalTxPowerOffset indicates the
Tx_PWR(Offset) value as specified in Table 3.16 in the
SFF Committee Standard's document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 49 }
tmnxDDMExtCalTemperatureSlope OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalTemperatureSlope indicates the
T(Slope) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 50 }
tmnxDDMExtCalTemperatureOffset OBJECT-TYPE
SYNTAX Integer32 (-32767..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalTemperatureOffset indicates the
T(Offset) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 51 }
tmnxDDMExtCalVoltageSlope OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalVoltageSlope indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 52 }
tmnxDDMExtCalVoltageOffset OBJECT-TYPE
SYNTAX Integer32 (-32767..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDDMExtCalVoltageOffset indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2."
REFERENCE "SFF-8472 Rev 10.2"
::= { tmnxDigitalDiagMonitorEntry 53 }
--
--
-- Port Notification Objects
--
tmnxPortNotifyPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx port Notifications, the OID indicates the
port or sonet path associated with the alarm."
::= { tmnxPortNotificationObjects 1 }
tmnxPortNotifySonetAlarmReason OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
loc(1),
lais(2),
lrdi(3),
ss1f(4),
sb1err(5),
lb2erSd(6),
lb2erSf(7),
slof(8),
slos(9),
stxptr(10),
srxptr(11),
lrei(12)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx sonet Port Notifications, the value of
tmnxPortNotifySonetAlarmReason indicates the reason a sonet port
alarm has been raised."
::= { tmnxPortNotificationObjects 2 }
tmnxPortNotifySonetPathAlarmReason OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
pais(1),
plop(2),
prdi(3),
pb3err(4),
pplm(5),
prei(6),
puneq(7),
plcd(8)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx sonet path Notifications, the value of
tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path
alarm has been raised."
::= { tmnxPortNotificationObjects 3 }
tmnxPortNotifyError OBJECT-TYPE
SYNTAX INTEGER {
txClockError (1),
rxClockError(2),
txFifoError(3),
laserError(4),
miscError(5)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnxEqPortError notification, the value of
tmnxPortNotifyError indicates the reason a port has
an error."
::= { tmnxPortNotificationObjects 4 }
tmnxPortNotifyDS3AlarmReason OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
ais (1),
los (2),
oof (3),
rai (4),
looped (5)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx DS3 Port Notifications, the value of
tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface
alarm has been raised."
::= { tmnxPortNotificationObjects 5 }
tmnxPortNotifyDS1AlarmReason OBJECT-TYPE
SYNTAX INTEGER {
notUsed (0),
ais (1),
los (2),
oof (3),
rai (4),
looped (5),
berSd (6),
berSf (7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx DS1 Port Notifications, the value of
tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface
alarm has been raised."
::= { tmnxPortNotificationObjects 6 }
tmnxPortNotifyBundleId OBJECT-TYPE
SYNTAX TmnxBundleID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx bundle Notifications, the value indicates the
bundle associated with the alarm."
::= { tmnxPortNotificationObjects 7 }
tmnxPortNotifyEtherAlarmReason OBJECT-TYPE
SYNTAX TmnxPortEtherReportValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by tmnx ethernet Port Notifications, the value of
tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port
alarm has been raised."
::= { tmnxPortNotificationObjects 8 }
tmnxDDMFailedObject OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
temperature-low-warning (1),
temperature-low-alarm (2),
temperature-high-warning (3),
temperature-high-alarm (4),
supplyVoltage-low-warning (5),
supplyVoltage-low-alarm (6),
supplyVoltage-high-warning (7),
supplyVoltage-high-alarm (8),
txBiasCurrent-low-warning (9),
txBiasCurrent-low-alarm (10),
txBiasCurrent-high-warning (11),
txBiasCurrent-high-alarm (12),
txOutputPower-low-warning (13),
txOutputPower-low-alarm (14),
txOutputPower-high-warning (15),
txOutputPower-high-alarm (16),
rxOpticalPower-low-warning (17),
rxOpticalPower-low-alarm (18),
rxOpticalPower-high-warning (19),
rxOpticalPower-high-alarm (20),
aux1-low-warning (21),
aux1-low-alarm (22),
aux1-high-warning (23),
aux1-high-alarm (24),
aux2-low-warning (25),
aux2-low-alarm (26),
aux2-high-warning (27),
aux2-high-alarm (28)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Used by Digital Diagnostic Monitoring (DDM) Notifications, the
value of tmnxDDMFailedObject indicates which object of the
monitored SFP/XFP is in a failed or cleared threshold state."
::= { tmnxPortNotificationObjects 9 }
--
-- ALCATEL-IND1-TIMETRA-PORT-MIB Notifications
--
--
-- Equipment Alarms
--
tmnxEqOobPortFailure NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyChassisId,
tmnxPortNotifyPortId
}
STATUS obsolete
DESCRIPTION
"Generated when the out-of-band Ethernet port has failed. On the
Alcatel 7x50 SR system, the out-of-band port is the CPM management
interface.
This notification was made obsolete in the 2.1 release.
The Out-of-band, OOB, port is what id refered to as the
management port or cpm port. It has an entry in ifTable
and linkup, linkDown and tmnxEqPortError notifications
are sent for the management port just as for any other
port in the system."
::= { tmnxPortNotification 1 }
tmnxEqPortFailure NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyChassisId,
tmnxPortNotifyPortId
}
STATUS obsolete
DESCRIPTION
"Generated when a port has failed.
This notification was made obsolete in the 2.1 release.
tmnxEqPortError is used instead of tmnxEqPortFailure.
Standard IETF linkDown notification is sent when a
physical port failure is detected. tmnxEqPortError is
sent with a ASCII reason message when port errors are
detected.
It was originally intended that tmnxEqPortError be used
to report errors that do not cause port state change to
'down'.
tmnxEqPortFailure was intended to report errors that
do cause the port state change to 'down'.
However, in the implementation tmnxEqPortError is used
for both fatal and non-fatal errors."
::= { tmnxPortNotification 2 }
tmnxEqPortSonetAlarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifySonetAlarmReason
}
STATUS current
DESCRIPTION
"Generated when a SONET/SDH port alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in tmnxSonetReportAlarm."
::= { tmnxPortNotification 4 }
tmnxEqPortSonetAlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifySonetAlarmReason
}
STATUS current
DESCRIPTION
"Generated when a SONET/SDH port alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in tmnxSonetReportAlarm."
::= { tmnxPortNotification 5 }
tmnxEqPortSonetPathAlarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifySonetPathAlarmReason
}
STATUS current
DESCRIPTION
"Generated when a SONET/SDH path alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in tmnxSonetPathReportAlarm."
::= { tmnxPortNotification 6 }
tmnxEqPortSonetPathAlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifySonetPathAlarmReason
}
STATUS current
DESCRIPTION
"Generated when a SONET/SDH path alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in tmnxSonetPathReportAlarm."
::= { tmnxPortNotification 7 }
tmnxEqPortSFPInserted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS current
DESCRIPTION
"Generated when a SFP is inserted in the port."
::= { tmnxPortNotification 8 }
tmnxEqPortSFPRemoved NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS current
DESCRIPTION
"Generated when a SFP is removed from the port."
::= { tmnxPortNotification 9 }
tmnxEqPortWrongSFP NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS obsolete
DESCRIPTION
"Generated when a wrong type of SFP optics module
is plugged into a 1 Gig MDA, SONET MDA, or 100FX MDA.
Because of the large variety of SFPs now supported and
their different encoding schemes for compliance bits, the
check for wrong SFP has been removed. As a result,
tmnxEqPortWrongSFP notification is no longer generated.
However, wrong SFP can be inferred from port statistics."
::= { tmnxPortNotification 10 }
tmnxEqPortSFPCorrupted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS obsolete
DESCRIPTION
"Generated when SFP information stored in the EPROM
on the SFP is corrupt. This notification was made
obsolete for revision 6.0 on Alcatel 7x50 SR series
systems; it was replaced by tmnxEqPortSFPStatusFailure."
::= { tmnxPortNotification 11 }
tmnxPortNotifyBerSdTca NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxSonetBerSdThreshold
}
STATUS obsolete
DESCRIPTION
"Generated when a SONET/SDH port's signal degradation bit error
rate is greater than the configured error rate threshold.
This notification was made obsolete in the 2.1 release."
::= { tmnxPortNotification 12 }
tmnxPortNotifyBerSfTca NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxSonetBerSfThreshold
}
STATUS obsolete
DESCRIPTION
"Generated when a SONET/SDH port's signal failure bit error
rate is greater than the configured error rate threshold.
This notification was made obsolete in the 2.1 release."
::= { tmnxPortNotification 13 }
tmnxEqPortError NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyError
}
STATUS current
DESCRIPTION
"Generated when an error listed in tmnxPortNotifyError
is detected on the port."
::= { tmnxPortNotification 14 }
tmnxEqPortDS3Alarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyDS3AlarmReason
}
STATUS current
DESCRIPTION
"Generated when a DS3 interface alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in tmnxDS3ChannelReportAlarm."
::= { tmnxPortNotification 15 }
tmnxEqPortDS3AlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyDS3AlarmReason
}
STATUS current
DESCRIPTION
"Generated when a DS3 interface alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in tmnxDS3ChannelReportAlarm."
::= { tmnxPortNotification 16 }
tmnxEqPortDS1Alarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyDS1AlarmReason
}
STATUS current
DESCRIPTION
"Generated when a DS1 interface alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in tmnxDS1ReportAlarm."
::= { tmnxPortNotification 17 }
tmnxEqPortDS1AlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyDS1AlarmReason
}
STATUS current
DESCRIPTION
"Generated when a DS1 interface alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in tmnxDS1ReportAlarm."
::= { tmnxPortNotification 18 }
tmnxEqPortBndlYellowDiffExceeded NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxBundleYellowDiffDelay
}
STATUS current
DESCRIPTION
"Generated when the differential delay of a port in the bundle
exceeds the configured value in tmnxBundleYellowDiffDelay."
::= { tmnxPortNotification 19 }
tmnxEqPortBndlRedDiffExceeded NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxBundleRedDiffDelay
}
STATUS current
DESCRIPTION
"Generated when the differential delay of a port in the bundle
exceeds the configured value in tmnxBundleRedDiffDelay."
::= { tmnxPortNotification 20 }
tmnxEqPortBndlBadEndPtDiscr NOTIFICATION-TYPE
OBJECTS {
tmnxBundleMemberDownReason
}
STATUS current
DESCRIPTION
"Generated when the port detected mismatched peer endpoint
discriminator for the bundle."
::= { tmnxPortNotification 21 }
tmnxEqPortEtherAlarm NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyEtherAlarmReason
}
STATUS current
DESCRIPTION
"tmnxEqPortEtherAlarm is generated when a ethernet port alarm
condition is detected. It is generated only when the type of
alarm being raised is enabled in tmnxPortEtherReportAlarm."
::= { tmnxPortNotification 22 }
tmnxEqPortEtherAlarmClear NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortNotifyEtherAlarmReason
}
STATUS current
DESCRIPTION
"tmnxEqPortEtherAlarmClear is generated when a ethernet port alarm
condition is cleared. It is generated only when the type of alarm
being cleared is enabled in tmnxPortEtherReportAlarm."
::= { tmnxPortNotification 23 }
tmnxDS1E1LoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxDS1Loopback
}
STATUS current
DESCRIPTION
"The tmnxDS1E1LoopbackStarted notification is generated when a
loopback is provisioned on a DS1/E1 port."
::= { tmnxPortNotification 24 }
tmnxDS1E1LoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxDS1Loopback
}
STATUS current
DESCRIPTION
"The tmnxDS1E1LoopbackStopped notification is generated when a
loopback is removed on a DS1/E1 port. The value of
tmnxSonetLoopback specifies the type of loopback that was
configured and has now been removed."
::= { tmnxPortNotification 25 }
tmnxDS3E3LoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxDS3ChannelLoopback
}
STATUS current
DESCRIPTION
"The tmnxDS3E3LoopbackStarted notification is generated when a
loopback is provisioned on a DS3/E3 port."
::= { tmnxPortNotification 26 }
tmnxDS3E3LoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxDS3ChannelLoopback
}
STATUS current
DESCRIPTION
"The tmnxDS3E3LoopbackStopped notification is generated when a
loopback is removed on a DS3/E3 port. The value of
tmnxDS3ChannelLoopback specifies the type of loopback that was
configured and has now been removed."
::= { tmnxPortNotification 27 }
tmnxSonetSDHLoopbackStarted NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxSonetLoopback
}
STATUS current
DESCRIPTION
"The tmnxSonetSDHLoopbackStarted notification is generated when a
loopback is provisioned on a Sonet-SDH port."
::= { tmnxPortNotification 28 }
tmnxSonetSDHLoopbackStopped NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxSonetLoopback
}
STATUS current
DESCRIPTION
"The tmnxSonetSDHLoopbackStopped notification is generated when a
loopback test is removed on a Sonet-SDH port. The value of
tmnxDS1Loopback specifies the type of loopback that was
configured and has now been removed."
::= { tmnxPortNotification 29 }
--
-- Down-when-looped Alarm
--
tmnxEqPortEtherLoopDetected NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS current
DESCRIPTION
"The tmnxEqPortEtherLoopDetected notification is genereated when
down-when-looped detects an Ethernet port is receiving PDUs that
it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to
'true'."
::= { tmnxPortNotification 30 }
tmnxEqPortEtherLoopCleared NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS current
DESCRIPTION
"The tmnxEqPortEtherLoopCleared notification is generated when
down-when-looped detects an Ethernet port has stopped receiving
PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled
is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to
'false' will also cause this notification to be generated if
tmnxEqPortEtherLoopDetected had previously been raised."
::= { tmnxPortNotification 31 }
tmnxEqPortSpeedCfgNotCompatible NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortEtherSpeed
}
STATUS current
DESCRIPTION
"Generated when a supported MDA is inserted into a slot of an
IOM, the MDA is compatible with the currently provisioned MDA,
but the currently configured speed on an MDA port is not
compatible with the inserted MDA."
::= { tmnxPortNotification 32 }
tmnxEqPortDuplexCfgNotCompatible NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortEtherDuplex
}
STATUS current
DESCRIPTION
"Generated when a supported MDA is inserted into a slot of an
IOM, the MDA is compatible with the currently provisioned MDA,
but the currently configured duplex on an MDA port is not
compatible with the inserted MDA."
::= { tmnxPortNotification 33 }
tmnxEqPortIngressRateCfgNotCompatible NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId
}
STATUS current
DESCRIPTION
"Generated when a supported MDA is inserted into a slot of an
IOM, the MDA is compatible with the currently provisioned MDA,
but the currently configured ingress rate on an MDA port is not
compatible with the inserted MDA."
::= { tmnxPortNotification 34 }
tmnxEqDigitalDiagMonitorFailure NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxDDMFailedObject
}
STATUS current
DESCRIPTION
"Generated when an SFP/XFP that supports Digital Diagnostic
Monitoring (DDM) enters a failed state."
::= { tmnxPortNotification 35 }
tmnxEqPortSFPStatusFailure NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortSFPStatus
}
STATUS current
DESCRIPTION
"Generated when the tmnxPortSFPStatus of an SFP/XFP results in
a value other than 'not-equipped (0)', or 'operational (1)'.
tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for
revision 6.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortNotification 36 }
--
-- Quality of Service Alarm
--
tmnxQosServiceDegraded NOTIFICATION-TYPE
OBJECTS {
tmnxChassisNotifyChassisId,
tmnxPortNotifyPortId
}
STATUS obsolete
DESCRIPTION
"Generated when the port is unable to provided the specified
quality of service level."
::= { tmnxPortNotification 3 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- The compliance specifications.
--
tmnxPortCompliances OBJECT IDENTIFIER ::= { tmnxPortConformance 1 }
tmnxPortGroups OBJECT IDENTIFIER ::= { tmnxPortConformance 2 }
tmnxPortComp7750 OBJECT IDENTIFIER ::= { tmnxPortCompliances 3 }
-- tmnxPortComp7750V3v0 OBJECT IDENTIFIER ::= { tmnxPortComp7750 1}
tmnxPortComp7450 OBJECT IDENTIFIER ::= { tmnxPortCompliances 4 }
-- tmnxPortComp7450V3v0 OBJECT IDENTIFIER ::= { tmnxPortComp7450 1 }
tmnxPortComp7710 OBJECT IDENTIFIER ::= { tmnxPortCompliances 5 }
-- tmnxPortComp7710V3v0 OBJECT IDENTIFIER ::= { tmnxPortComp7710 1 }
-- tmnxPortCompliance MODULE-COMPLIANCE
-- ::= { tmnxPortCompliances 1 }
-- tmnxPortR2r1Compliance MODULE-COMPLIANCE
-- ::= { tmnxPortCompliances 2 }
-- tmnxPortComp7750V3v0 MODULE-COMPLIANCE
-- ::= { tmnxPortComp7750 1 }
tmnxPortComp7750V4v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on
the Alcatel 7750 SR series systems.
tmnxMlImaBundleGroup was added as of R4."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV4v0,
tmnxPortEthernetV3v0Group,
tmnxPortSonetV3v0Group,
tmnxPortTDMGroupV4v0,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV3v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortATMGroupV4v0,
tmnxPortStatsR2r1Group,
tmnxCiscoHDLCGroup,
tmnxScalarPortV3v0Group,
tmnxMlBundleGroupV4v0,
tmnxMlImaBundleGroup
}
::= { tmnxPortComp7750 2 }
tmnxPortComp7750V5v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on
the Alcatel 7750 SR series systems."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV5v0,
tmnxPortSonetV3v0Group,
tmnxPortTDMGroupV5v0,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV5v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortATMGroupV4v0,
tmnxPortStatsR2r1Group,
tmnxCiscoHDLCGroup,
tmnxScalarPortV3v0Group,
tmnxMlBundleGroupV5v0,
tmnxMlImaBundleGroup,
tmnxPortSchedV5v0Group,
tmnxPortEthernetV5v0Group
}
::= { tmnxPortComp7750 3 }
tmnxPortComp7750V6v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on
the Alcatel 7750 SR series systems."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV6v0,
tmnxPortSonetV3v0Group,
tmnxPortTDMGroupV6v0,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV6v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortATMGroupV4v0,
tmnxPortStatsR2r1Group,
tmnxCiscoHDLCGroup,
tmnxScalarPortV3v0Group,
tmnxMlBundleGroupV6v0,
tmnxMlImaBundleGroup,
tmnxPortSchedV5v0Group,
tmnxPortEthernetV6v0Group,
tmnxPortCemGroupV6v0,
tmnxMcMlpppBundleGroup,
tmnxMlpppBundleGroup,
tmnxNamedPoolGroupV6v0,
tmnxDigitalDiagMonitorGroup
}
::= { tmnxPortComp7750 4 }
-- tmnxPortComp7450V3v0 MODULE-COMPLIANCE
-- ::= { tmnxPortComp7450 1 }
tmnxPortComp7450V4v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on
the Alcatel 7450 SR series systems."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV4v0,
tmnxPortEthernetV3v0Group,
tmnxPortSonetV3v0Group,
-- tmnxPortTDMGroupV4v0,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV3v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortStatsR2r1Group,
tmnxScalarPortV3v0Group
-- tmnxPortATMGroupV4v0, No ATM on 7450
-- tmnxCiscoHDLCGroup, No Cisco HDLC on 7450
-- tmnxMlBundleGroupV4v0 No ML Bundles on 7450
-- tmnxMlImaBundleGroup No IMA Bundles on 7450
}
::= { tmnxPortComp7450 2 }
tmnxPortComp7450V5v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on
the Alcatel 7450 SR series systems."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV5v0,
tmnxPortSonetV3v0Group,
--tmnxPortTDMGroupV5v0, No TDM interfaces
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV5v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortStatsR2r1Group,
tmnxScalarPortV3v0Group,
-- tmnxPortATMGroupV4v0, No ATM on 7450
-- tmnxCiscoHDLCGroup, No Cisco HDLC on 7450
-- tmnxMlBundleGroupV5v0 No ML Bundles on 7450
-- tmnxMlImaBundleGroup No IMA Bundles on 7450
-- tmnxPortSchedV5v0Group,
tmnxPortEthernetV5v0Group
}
::= { tmnxPortComp7450 3 }
tmnxPortComp7450V6v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on
the Alcatel 7450 SR series systems."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV6v0,
tmnxPortSonetV3v0Group,
-- tmnxPortTDMGroupV6v0, No TDM interfaces
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV6v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortStatsR2r1Group,
tmnxScalarPortV3v0Group,
-- tmnxPortATMGroupV4v0, No ATM on 7450
-- tmnxCiscoHDLCGroup, No Cisco HDLC on 7450
-- tmnxMlBundleGroupV5v0 No ML Bundles on 7450
-- tmnxMlImaBundleGroup No IMA Bundles on 7450
-- tmnxPortSchedV5v0Group,
tmnxPortEthernetV6v0Group,
-- tmnxPortCemGroupV6v0 No CEM on 7450
-- tmnxMcMlpppBundleGroup No Multiclass MLPPP Bundles on 7450
-- tmnxMlpppBundleGroup No MLPPP Bundles on 7450
tmnxNamedPoolGroupV6v0,
tmnxDigitalDiagMonitorGroup
}
::= { tmnxPortComp7450 4 }
tmnxPortComp7710V3v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for revision 3.0 of ALCATEL-IND1-TIMETRA-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortV3v0Group,
tmnxPortEthernetV3v0Group,
tmnxPortSonetV3v0Group,
tmnxPortTDMV3v0Group,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
tmnxPortTestGroup,
tmnxPortNotificationGroupR2r1,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortATMV3v0Group,
tmnxPortStatsR2r1Group,
tmnxCiscoHDLCGroup,
tmnxScalarPortV3v0Group,
tmnxMlBundleV3v0Group,
tmnx7710PortTDMGroupV3v0
}
::= { tmnxPortComp7710 1 }
tmnxPortComp7710V5v0 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV5v0,
tmnxPortEthernetV5v0Group,
tmnxPortSonetV3v0Group,
tmnxPortTDMGroupV5v0,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV5v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortATMGroupV4v0,
tmnxPortStatsR2r1Group,
tmnxCiscoHDLCGroup,
tmnxScalarPortV3v0Group,
tmnxMlBundleGroupV5v0,
tmnxPortSchedV5v0Group,
tmnx7710PortTDMGroupV5v0
}
::= { tmnxPortComp7710 2 }
tmnxPortComp7710V6v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
tmnxPortGroupV6v0,
tmnxPortEthernetV6v0Group,
tmnxPortSonetV3v0Group,
tmnxPortTDMGroupV6v0,
tmnxPortFRGroup,
tmnxQosAppObjsGroup,
-- tmnxPortTestGroup,
tmnxPortNotificationGroupV6v0,
tmnxPortIngrMdaQosStatR2r1Group,
tmnxPortATMGroupV4v0,
tmnxPortStatsR2r1Group,
tmnxCiscoHDLCGroup,
tmnxScalarPortV3v0Group,
tmnxMlBundleGroupV6v0,
tmnxPortSchedV5v0Group,
tmnx7710PortTDMGroupV5v0,
tmnxPortCemGroupV6v0,
tmnxMcMlpppBundleGroup,
tmnxMlpppBundleGroup,
-- tmnxNamedPoolGroupV6v0,
tmnxDigitalDiagMonitorGroup
}
::= { tmnxPortComp7710 3 }
-- units of conformance
-- tmnxPortGroup OBJECT-GROUP
-- ::= { tmnxPortGroups 1 }
-- tmnxPortEthernetGroup OBJECT-GROUP
-- ::= { tmnxPortGroups 2 }
-- tmnxPortSONETGroup OBJECT-GROUP
-- ::= { tmnxPortGroups 3 }
-- tmnxPortTDMGroup OBJECT-GROUP
-- ::= { tmnxPortGroups 4 }
tmnxPortFRGroup OBJECT-GROUP
OBJECTS { tmnxFRDlcmiMode,
tmnxFRDlcmiN392Dce,
tmnxFRDlcmiN393Dce,
tmnxFRDlcmiT392Dce,
tmnxFRDlcmiTxStatusEnqMsgs,
tmnxFRDlcmiRxStatusEnqMsgs,
tmnxFRDlcmiStatusEnqMsgTimeouts,
tmnxFRDlcmiTxStatusMsgs,
tmnxFRDlcmiRxStatusMsgs,
tmnxFRDlcmiStatusMsgTimeouts,
tmnxFRDlcmiDiscardedMsgs,
tmnxFRDlcmiInvRxSeqNumMsgs
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Frame Relay DLCMI
on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 5 }
tmnxQosAppObjsGroup OBJECT-GROUP
OBJECTS { tmnxObjectAppPoolRowStatus,
tmnxObjectAppResvCbs,
tmnxObjectAppSlopePolicy,
tmnxObjectAppPoolSize
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Qos associations of
the buffer pools to mdas, ports, channels and bundles on
Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 6 }
tmnxPortTestGroup OBJECT-GROUP
OBJECTS { tmnxPortTestState,
tmnxPortTestMode,
tmnxPortTestParameter,
tmnxPortTestLastResult,
tmnxPortTestStartTime,
tmnxPortTestEndTime,
tmnxPortTestDuration,
tmnxPortTestAction
}
STATUS current
DESCRIPTION
"The group of objects supporting management of port testing
on Alcatel 7x50 SR series system."
::= { tmnxPortGroups 7 }
-- tmnxPortNotifyObjsGroup OBJECT-GROUP
-- ::= { tmnxPortGroups 8 }
-- tmnxPortNotificationGroup NOTIFICATION-GROUP
-- ::= { tmnxPortGroups 9 }
-- tmnxPortATMGroup OBJECT-GROUP
-- ::= { tmnxPortGroups 10 }
tmnxPortObsoleteGroup OBJECT-GROUP
OBJECTS {
tmnxDS1IdleCycleFlags,
tmnxSonetPathType,
tmnxPortFCStatsIngFwdInProfPkts,
tmnxPortFCStatsIngFwdOutProfPkts,
tmnxPortFCStatsIngFwdInProfOcts,
tmnxPortFCStatsIngFwdOutProfOcts,
tmnxPortFCStatsIngDroInProfPkts,
tmnxPortFCStatsIngDroOutProfPkts,
tmnxPortFCStatsIngDroInProfOcts,
tmnxPortFCStatsIngDroOutProfOcts,
tmnxPortFCStatsEgrFwdInProfPkts,
tmnxPortFCStatsEgrFwdOutProfPkts,
tmnxPortFCStatsEgrFwdInProfOcts,
tmnxPortFCStatsEgrFwdOutProfOcts,
tmnxPortFCStatsEgrDroInProfPkts,
tmnxPortFCStatsEgrDroOutProfPkts,
tmnxPortFCStatsEgrDroInProfOcts,
tmnxPortFCStatsEgrDroOutProfOcts
}
STATUS current
DESCRIPTION
"The group of objects in ALCATEL-IND1-TIMETRA-PORT-MIB which are obsoleted."
::= { tmnxPortGroups 11 }
-- tmnxPortR2r1Group OBJECT-GROUP
-- ::= { tmnxPortGroups 12 }
-- tmnxPortEthernetR2r1Group OBJECT-GROUP
-- ::= { tmnxPortGroups 13 }
tmnxPortIngrMdaQosStatR2r1Group OBJECT-GROUP
OBJECTS {
tmnxPortIngrMdaQos00StatDropPkts,
tmnxPortIngrMdaQos00StatDropOcts,
tmnxPortIngrMdaQos01StatDropPkts,
tmnxPortIngrMdaQos01StatDropOcts,
tmnxPortIngrMdaQos02StatDropPkts,
tmnxPortIngrMdaQos02StatDropOcts,
tmnxPortIngrMdaQos03StatDropPkts,
tmnxPortIngrMdaQos03StatDropOcts,
tmnxPortIngrMdaQos04StatDropPkts,
tmnxPortIngrMdaQos04StatDropOcts,
tmnxPortIngrMdaQos05StatDropPkts,
tmnxPortIngrMdaQos05StatDropOcts,
tmnxPortIngrMdaQos06StatDropPkts,
tmnxPortIngrMdaQos06StatDropOcts,
tmnxPortIngrMdaQos07StatDropPkts,
tmnxPortIngrMdaQos07StatDropOcts,
tmnxPortIngrMdaQos08StatDropPkts,
tmnxPortIngrMdaQos08StatDropOcts,
tmnxPortIngrMdaQos09StatDropPkts,
tmnxPortIngrMdaQos09StatDropOcts,
tmnxPortIngrMdaQos10StatDropPkts,
tmnxPortIngrMdaQos10StatDropOcts,
tmnxPortIngrMdaQos11StatDropPkts,
tmnxPortIngrMdaQos11StatDropOcts,
tmnxPortIngrMdaQos12StatDropPkts,
tmnxPortIngrMdaQos12StatDropOcts,
tmnxPortIngrMdaQos13StatDropPkts,
tmnxPortIngrMdaQos13StatDropOcts,
tmnxPortIngrMdaQos14StatDropPkts,
tmnxPortIngrMdaQos14StatDropOcts,
tmnxPortIngrMdaQos15StatDropPkts,
tmnxPortIngrMdaQos15StatDropOcts
}
STATUS current
DESCRIPTION
"The group of objects that describe the MDA QoS discard
statistics for an ethernet port located on an oversubscribed MDA
for revision 2.1 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 14 }
-- tmnxPortSONETR2r1Group OBJECT-GROUP
-- ::= { tmnxPortGroups 15 }
tmnxPortStatsR2r1Group OBJECT-GROUP
OBJECTS {
tmnxPortNetIngressFwdInProfPkts,
tmnxPortNetIngressFwdOutProfPkts,
tmnxPortNetIngressFwdInProfOcts,
tmnxPortNetIngressFwdOutProfOcts,
tmnxPortNetIngressDroInProfPkts,
tmnxPortNetIngressDroOutProfPkts,
tmnxPortNetIngressDroInProfOcts,
tmnxPortNetIngressDroOutProfOcts,
tmnxPortNetEgressFwdInProfPkts,
tmnxPortNetEgressFwdOutProfPkts,
tmnxPortNetEgressFwdInProfOcts,
tmnxPortNetEgressFwdOutProfOcts,
tmnxPortNetEgressDroInProfPkts,
tmnxPortNetEgressDroOutProfPkts,
tmnxPortNetEgressDroInProfOcts,
tmnxPortNetEgressDroOutProfOcts
}
STATUS current
DESCRIPTION
"The group of objects supporting port statistics
for revision 2.1 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 16 }
tmnxPortNotificationGroupR2r1 NOTIFICATION-GROUP
NOTIFICATIONS { tmnxEqPortSonetAlarm,
tmnxEqPortSonetAlarmClear,
tmnxEqPortSonetPathAlarm,
tmnxEqPortSonetPathAlarmClear,
tmnxEqPortSFPInserted,
tmnxEqPortSFPRemoved,
tmnxEqPortSFPCorrupted,
tmnxEqPortError,
tmnxEqPortDS3Alarm,
tmnxEqPortDS3AlarmClear,
tmnxEqPortDS1Alarm,
tmnxEqPortDS1AlarmClear,
tmnxEqPortBndlYellowDiffExceeded,
tmnxEqPortBndlRedDiffExceeded,
tmnxEqPortBndlBadEndPtDiscr,
tmnxEqPortEtherAlarm,
tmnxEqPortEtherAlarmClear
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the management of physical
ports for revision 2.1 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 17 }
tmnxPortNotifyObjsGroupR2r1 OBJECT-GROUP
OBJECTS { tmnxPortNotifyPortId,
tmnxPortNotifySonetAlarmReason,
tmnxPortNotifySonetPathAlarmReason,
tmnxPortNotifyError,
tmnxPortNotifyDS3AlarmReason,
tmnxPortNotifyDS1AlarmReason,
tmnxPortNotifyBundleId,
tmnxPortNotifyEtherAlarmReason
}
STATUS current
DESCRIPTION
"The group of objects supporting physical port notifications
for revision 2.1 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 18 }
-- tmnxPortTDMGroupR2r1 OBJECT-GROUP
-- ::= { tmnxPortGroups 19 }
tmnxPortNotifyObsoleteGroup NOTIFICATION-GROUP
NOTIFICATIONS { tmnxEqOobPortFailure,
tmnxEqPortFailure,
tmnxQosServiceDegraded,
tmnxPortNotifyBerSdTca,
tmnxPortNotifyBerSfTca,
tmnxEqPortWrongSFP,
tmnxEqPortSFPCorrupted
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of physical
ports made obsolete for revision 2.1 on Alcatel 7x50 SR series
systems. tmnxEqPortSFPCorrupted was made obsolete for revision 6.0
on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 20 }
tmnxPortSonetV3v0Group OBJECT-GROUP
OBJECTS { tmnxSonetSpeed,
tmnxSonetClockSource,
tmnxSonetFraming,
tmnxSonetReportAlarm,
tmnxSonetBerSdThreshold,
tmnxSonetBerSfThreshold,
tmnxSonetLoopback,
tmnxSonetReportAlarmStatus,
tmnxSonetSectionTraceMode,
tmnxSonetJ0String,
tmnxSonetMonS1Byte,
tmnxSonetMonJ0String,
tmnxSonetMonK1Byte,
tmnxSonetMonK2Byte,
tmnxSonetSingleFiber,
tmnxSonetHoldTimeUp,
tmnxSonetHoldTimeDown,
tmnxSonetPathRowStatus,
tmnxSonetPathLastChangeTime,
tmnxSonetPathMTU,
tmnxSonetPathScramble,
tmnxSonetPathC2Byte,
tmnxSonetPathJ1String,
tmnxSonetPathCRC,
tmnxSonetPathOperMTU,
tmnxSonetPathOperMRU,
tmnxSonetPathReportAlarm,
tmnxSonetPathAcctPolicyId,
tmnxSonetPathCollectStats,
tmnxSonetPathReportAlarmStatus,
tmnxSonetPathMonC2Byte,
tmnxSonetPathMonJ1String,
tmnxSonetPathChildType,
tmnxSonetGroupType,
tmnxSonetGroupParentPortID,
tmnxSonetGroupChildType,
tmnxSonetGroupName
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SONET type ports
for revision 3.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 21 }
tmnxPortTDMV3v0Group OBJECT-GROUP
OBJECTS { tmnxDS3Buildout,
tmnxDS3Type,
tmnxDS3LastChangeTime,
tmnxDS3ChannelRowStatus,
tmnxDS3ChannelType,
tmnxDS3ChannelFraming,
tmnxDS3ChannelClockSource,
tmnxDS3ChannelChannelized,
tmnxDS3ChannelSubrateCSUMode,
tmnxDS3ChannelSubrate,
tmnxDS3ChannelIdleCycleFlags,
tmnxDS3ChannelLoopback,
tmnxDS3ChannelBitErrorInsertionRate,
tmnxDS3ChannelBERTPattern,
tmnxDS3ChannelBERTDuration,
tmnxDS3ChannelMDLEicString,
tmnxDS3ChannelMDLLicString,
tmnxDS3ChannelMDLFicString,
tmnxDS3ChannelMDLUnitString,
tmnxDS3ChannelMDLPfiString,
tmnxDS3ChannelMDLPortString,
tmnxDS3ChannelMDLGenString,
tmnxDS3ChannelMDLMessageType,
tmnxDS3ChannelFEACLoopRespond,
tmnxDS3ChannelCRC,
tmnxDS3ChannelMTU,
tmnxDS3ChannelOperMTU,
tmnxDS3ChannelReportAlarm,
tmnxDS3ChannelReportAlarmStatus,
tmnxDS3ChannelLastChangeTime,
tmnxDS3ChannelInFEACLoop,
tmnxDS3ChannelMDLMonPortString,
tmnxDS3ChannelMDLMonGenString,
tmnxDS3ChannelBERTOperStatus,
tmnxDS3ChannelBERTSynched,
tmnxDS3ChannelBERTErrors,
tmnxDS3ChannelBERTTotalBits,
tmnxDS1RowStatus,
tmnxDS1Type,
tmnxDS1Framing,
tmnxDS1Loopback,
tmnxDS1InvertData,
tmnxDS1BitErrorInsertionRate,
tmnxDS1BERTPattern,
tmnxDS1BERTDuration,
tmnxDS1ReportAlarm,
tmnxDS1ReportAlarmStatus,
tmnxDS1LastChangeTime,
tmnxDS1ClockSource,
tmnxDS1BERTOperStatus,
tmnxDS1BERTSynched,
tmnxDS1BERTErrors,
tmnxDS1BERTTotalBits,
tmnxDS1RemoteLoopRespond,
tmnxDS1InRemoteLoop,
tmnxDS0ChanGroupRowStatus,
tmnxDS0ChanGroupTimeSlots,
tmnxDS0ChanGroupSpeed,
tmnxDS0ChanGroupCRC,
tmnxDS0ChanGroupMTU,
tmnxDS0ChanGroupOperMTU,
tmnxDS0ChanGroupLastChangeTime,
tmnxDS0ChanGroupIdleCycleFlags
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of TDM type ports
for revision 3.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 22 }
tmnxPortATMV3v0Group OBJECT-GROUP
OBJECTS {
tmnxATMIntfCellFormat,
tmnxATMIntfMinVpValue
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of ATM interfaces
for version 3.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 23 }
tmnxScalarPortV3v0Group OBJECT-GROUP
OBJECTS { tmnxL4LoadBalancing }
STATUS current
DESCRIPTION
"The group of objects supporting management for general port
settings for revision 3.0 on Alcatel 7x50 series systems."
::= { tmnxPortGroups 24 }
tmnxPortV3v0Group OBJECT-GROUP
OBJECTS { tmnxPortTableLastChange,
tmnxPortLastChangeTime,
tmnxPortType,
tmnxPortClass,
tmnxPortDescription,
tmnxPortName,
tmnxPortAlias,
tmnxPortUserAssignedMac,
tmnxPortMacAddress,
tmnxPortHwMacAddress,
tmnxPortMode,
tmnxPortEncapType,
tmnxPortLagId,
tmnxPortHoldTimeUp,
tmnxPortHoldTimeDown,
tmnxPortUpProtocols,
tmnxPortConnectorType,
tmnxPortTransceiverType,
tmnxPortTransceiverCode,
tmnxPortTransceiverLaserWaveLen,
tmnxPortTransceiverDiagCapable,
tmnxPortTransceiverModelNumber,
tmnxPortSFPConnectorCode,
tmnxPortSFPVendorOUI,
tmnxPortSFPVendorManufactureDate,
tmnxPortSFPMedia,
tmnxPortSFPEquipped,
tmnxPortSFPVendorSerialNum,
tmnxPortSFPVendorPartNum,
tmnxPortEquipped,
tmnxPortLinkStatus,
tmnxPortAdminStatus,
tmnxPortOperStatus,
tmnxPortState,
tmnxPortPrevState,
tmnxPortNumAlarms,
tmnxPortAlarmState,
tmnxPortLastAlarmEvent,
tmnxPortClearAlarms,
tmnxPortLastStateChanged,
tmnxPortNumChannels,
tmnxPortNetworkEgrQueues,
tmnxPortIsLeaf,
tmnxPortChanType,
tmnxPortParentPortID,
tmnxPortLoadBalanceAlgorithm,
tmnxPortTypeName,
tmnxPortTypeDescription,
tmnxPortTypeStatus,
tmnxPortConnectTypeName,
tmnxPortConnectTypeDescription,
tmnxPortConnectTypeStatus,
tmnxChannelPortID,
tmnxPortOpticalCompliance,
tmnxL4LoadBalancing
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of physical port
capabilities for revision 3.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 25 }
tmnxCiscoHDLCGroup OBJECT-GROUP
OBJECTS { tmnxCiscoHDLCKeepAliveInt,
tmnxCiscoHDLCUpCount,
tmnxCiscoHDLCDownCount,
tmnxCiscoHDLCOperState,
tmnxCiscoHDLCDiscardStatInPkts,
tmnxCiscoHDLCDiscardStatOutPkts,
tmnxCiscoHDLCStatInPkts,
tmnxCiscoHDLCStatOutPkts,
tmnxCiscoHDLCStatInOctets,
tmnxCiscoHDLCStatOutOctets
}
STATUS current
DESCRIPTION
"The group of objects supporting Cisco HDLC encapsulation on Alcatel
7750 SR series systems."
::= { tmnxPortGroups 26 }
tmnxMlBundleV3v0Group OBJECT-GROUP
OBJECTS { tmnxBundleRowStatus,
tmnxBundleType,
tmnxBundleMinimumLinks,
tmnxBundleNumLinks,
tmnxBundleNumActiveLinks,
tmnxBundleMRRU,
tmnxBundleOperMRRU,
tmnxBundlePeerMRRU,
tmnxBundleOperMTU,
tmnxBundleRedDiffDelay,
tmnxBundleRedDiffDelayAction,
tmnxBundleYellowDiffDelay,
tmnxBundleShortSequence,
tmnxBundleLastChangeTime,
tmnxBundleFragmentThreshold,
tmnxBundleUpTime,
tmnxBundleMemberRowStatus,
tmnxBundleMemberActive,
tmnxBundleMemberDownReason,
tmnxBundleMemberUpTime,
tmnxBundleInputDiscards,
tmnxBundlePrimaryMemberPortID,
tmnxBundleLFI,
tmnxPortBundleNumber
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management MLBUNDLES
for revision 3.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 27 }
tmnxObsoleteGroupV3v0 OBJECT-GROUP
OBJECTS { tmnxSonetAps,
tmnxSonetApsAdminStatus,
tmnxSonetApsOperStatus,
tmnxSonetApsAuthKey,
tmnxSonetApsNeighborAddr,
tmnxSonetApsAdvertiseInterval,
tmnxSonetApsAdvertiseTimeLeft,
tmnxSonetApsHoldTime,
tmnxSonetApsHoldTimeLeft
}
STATUS current
DESCRIPTION
"The group of objects obsoleted in the 7x50 SR series 3.0 release"
::= { tmnxPortGroups 28 }
tmnxPortEthernetV3v0Group OBJECT-GROUP
OBJECTS { tmnxPortEtherMTU,
tmnxPortEtherDuplex,
tmnxPortEtherSpeed,
tmnxPortEtherAutoNegotiate,
tmnxPortEtherOperDuplex,
tmnxPortEtherOperSpeed,
tmnxPortEtherAcctPolicyId,
tmnxPortEtherCollectStats,
tmnxPortEtherMDIMDIX,
tmnxPortEtherXGigMode,
tmnxPortEtherEgressRate,
tmnxPortEtherDot1qEtype,
tmnxPortEtherQinqEtype,
tmnxPortEtherIngressRate,
tmnxPortEtherReportAlarm,
tmnxPortEtherReportAlarmStatus,
tmnxPortEtherPkts1519toMax,
tmnxPortEtherHCOverPkts1519toMax,
tmnxPortEtherHCPkts1519toMax
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Ethernet ports
for revision 3.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 29 }
tmnxPortTDMGroupV4v0 OBJECT-GROUP
OBJECTS { tmnxDS3Buildout,
tmnxDS3Type,
tmnxDS3LastChangeTime,
tmnxDS3ChannelRowStatus,
tmnxDS3ChannelType,
tmnxDS3ChannelFraming,
tmnxDS3ChannelClockSource,
tmnxDS3ChannelChannelized,
tmnxDS3ChannelSubrateCSUMode,
tmnxDS3ChannelSubrate,
tmnxDS3ChannelIdleCycleFlags,
tmnxDS3ChannelLoopback,
tmnxDS3ChannelBitErrorInsertionRate,
tmnxDS3ChannelBERTPattern,
tmnxDS3ChannelBERTDuration,
tmnxDS3ChannelMDLEicString,
tmnxDS3ChannelMDLLicString,
tmnxDS3ChannelMDLFicString,
tmnxDS3ChannelMDLUnitString,
tmnxDS3ChannelMDLPfiString,
tmnxDS3ChannelMDLPortString,
tmnxDS3ChannelMDLGenString,
tmnxDS3ChannelMDLMessageType,
tmnxDS3ChannelFEACLoopRespond,
tmnxDS3ChannelCRC,
tmnxDS3ChannelMTU,
tmnxDS3ChannelOperMTU,
tmnxDS3ChannelReportAlarm,
tmnxDS3ChannelReportAlarmStatus,
tmnxDS3ChannelLastChangeTime,
tmnxDS3ChannelInFEACLoop,
tmnxDS3ChannelMDLMonPortString,
tmnxDS3ChannelMDLMonGenString,
tmnxDS3ChannelBERTOperStatus,
tmnxDS3ChannelBERTSynched,
tmnxDS3ChannelBERTErrors,
tmnxDS3ChannelBERTTotalBits,
tmnxDS3ChannelScramble,
tmnxDS1RowStatus,
tmnxDS1Type,
tmnxDS1Framing,
tmnxDS1Loopback,
tmnxDS1InvertData,
tmnxDS1BitErrorInsertionRate,
tmnxDS1BERTPattern,
tmnxDS1BERTDuration,
tmnxDS1ReportAlarm,
tmnxDS1ReportAlarmStatus,
tmnxDS1LastChangeTime,
tmnxDS1ClockSource,
tmnxDS1BERTOperStatus,
tmnxDS1BERTSynched,
tmnxDS1BERTErrors,
tmnxDS1BERTTotalBits,
tmnxDS1RemoteLoopRespond,
tmnxDS1InRemoteLoop,
tmnxDS0ChanGroupRowStatus,
tmnxDS0ChanGroupTimeSlots,
tmnxDS0ChanGroupSpeed,
tmnxDS0ChanGroupCRC,
tmnxDS0ChanGroupMTU,
tmnxDS0ChanGroupOperMTU,
tmnxDS0ChanGroupLastChangeTime,
tmnxDS0ChanGroupIdleCycleFlags,
tmnxDS0ChanGroupScramble
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of TDM type ports
for version 4.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 30 }
tmnxPortATMGroupV4v0 OBJECT-GROUP
OBJECTS {
tmnxATMIntfCellFormat,
tmnxATMIntfMinVpValue,
tmnxATMIntfMapping
}
STATUS current
DESCRIPTION
"The group of objects supporting management of ATM interfaces
for version 4.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 31 }
tmnxMlBundleGroupV4v0 OBJECT-GROUP
OBJECTS { tmnxBundleRowStatus,
tmnxBundleType,
tmnxBundleMinimumLinks,
tmnxBundleNumLinks,
tmnxBundleNumActiveLinks,
tmnxBundleMRRU,
tmnxBundleOperMRRU,
tmnxBundlePeerMRRU,
tmnxBundleOperMTU,
tmnxBundleRedDiffDelay,
tmnxBundleRedDiffDelayAction,
tmnxBundleYellowDiffDelay,
tmnxBundleShortSequence,
tmnxBundleLastChangeTime,
tmnxBundleFragmentThreshold,
tmnxBundleUpTime,
tmnxBundleMemberRowStatus,
tmnxBundleMemberActive,
tmnxBundleMemberDownReason,
tmnxBundleMemberUpTime,
tmnxBundleInputDiscards,
tmnxBundlePrimaryMemberPortID,
tmnxBundleLFI,
tmnxPortBundleNumber
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management MLBUNDLES
for revision 4.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 32 }
tmnxMlImaBundleGroup OBJECT-GROUP
OBJECTS {
tmnxBundleImaGrpLnkActTimer,
tmnxBundleImaGrpLnkDeactTimer,
tmnxBundleImaGrpSymmetryMode,
tmnxBundleImaGrpTxId,
tmnxBundleImaGrpRxId,
tmnxBundleImaGrpTxRefLnk,
tmnxBundleImaGrpRxRefLnk,
tmnxBundleImaGrpSmNeState,
tmnxBundleImaGrpSmFeState,
tmnxBundleImaGrpSmFailState,
tmnxBundleImaGrpSmDownSecs,
tmnxBundleImaGrpSmOperSecs,
tmnxBundleImaGrpAvailTxCR,
tmnxBundleImaGrpAvailRxCR,
tmnxBundleImaGrpNeFails,
tmnxBundleImaGrpFeFails,
tmnxBundleImaGrpTxIcpCells,
tmnxBundleImaGrpRxIcpCells,
tmnxBundleImaGrpErrorIcpCells,
tmnxBundleImaGrpLostRxIcpCells,
tmnxBundleImaGrpTxOamLablVal,
tmnxBundleImaGrpRxOamLablVal,
tmnxBundleImaGrpAlphaValue,
tmnxBundleImaGrpBetaValue,
tmnxBundleImaGrpGammaValue,
tmnxBundleImaGrpNeClockMode,
tmnxBundleImaGrpFeClockMode,
tmnxBundleImaGrpVersion,
tmnxBundleImaGrpMaxConfBw,
tmnxBundleImaGrpTestState,
tmnxBundleImaGrpTestMember,
tmnxBundleImaGrpTestPattern,
tmnxBundleImaGrpDiffDelayMaxObs,
tmnxBundleImaGrpLeastDelayLink,
tmnxBundleMemberImaNeTxState,
tmnxBundleMemberImaNeRxState,
tmnxBundleMemberImaFeTxState,
tmnxBundleMemberImaFeRxState,
tmnxBundleMemberImaNeRxFailState,
tmnxBundleMemberImaFeRxFailState,
tmnxBundleMemberImaTxLid,
tmnxBundleMemberImaRxLid,
tmnxBundleMemberImaViolations,
tmnxBundleMemberImaNeSevErrSecs,
tmnxBundleMemberImaFeSevErrSecs,
tmnxBundleMemberImaNeUnavailSecs,
tmnxBundleMemberImaFeUnavailSecs,
tmnxBundleMemberImaNeTxUnuseSecs,
tmnxBundleMemberImaNeRxUnuseSecs,
tmnxBundleMemberImaFeTxUnuseSecs,
tmnxBundleMemberImaFeRxUnuseSecs,
tmnxBundleMemberImaNeTxNumFails,
tmnxBundleMemberImaNeRxNumFails,
tmnxBundleMemberImaFeTxNumFails,
tmnxBundleMemberImaFeRxNumFails,
tmnxBundleMemberImaTxIcpCells,
tmnxBundleMemberImaRxIcpCells,
tmnxBundleMemberImaErrorIcpCells,
tmnxBundleMemberImaLstRxIcpCells,
tmnxBundleMemberImaOifAnomalies,
tmnxBundleMemberImaRxTestState,
tmnxBundleMemberImaRxTestPattern,
tmnxBundleMemberImaRelDelay
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Ima Groups
and Members on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 33 }
tmnx7710PortTDMGroupV3v0 OBJECT-GROUP
OBJECTS {
tmnxDS3ChannelAcctPolicyId,
tmnxDS3ChannelCollectStats,
tmnxDS1PortBuildout,
tmnxDS1PortLastChangeTime,
tmnxDS1PortType,
tmnxDS1PortLineLength,
tmnxDS1PortLbo,
tmnxDS1PortDbGain,
tmnxDS1InsertSingleBitError,
tmnxDS0ChanGroupAcctPolicyId,
tmnxDS0ChanGroupCollectStats
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of TDM type ports
specific to the Alcatel 7710 SR series systems for revision 3.0."
::= { tmnxPortGroups 34 }
tmnxPortGroupV4v0 OBJECT-GROUP
OBJECTS { tmnxPortTableLastChange,
tmnxPortLastChangeTime,
tmnxPortType,
tmnxPortClass,
tmnxPortDescription,
tmnxPortName,
tmnxPortAlias,
tmnxPortUserAssignedMac,
tmnxPortMacAddress,
tmnxPortHwMacAddress,
tmnxPortMode,
tmnxPortEncapType,
tmnxPortLagId,
tmnxPortHoldTimeUp,
tmnxPortHoldTimeDown,
tmnxPortUpProtocols,
tmnxPortConnectorType,
tmnxPortTransceiverType,
tmnxPortTransceiverCode,
tmnxPortTransceiverLaserWaveLen,
tmnxPortTransceiverDiagCapable,
tmnxPortTransceiverModelNumber,
tmnxPortSFPConnectorCode,
tmnxPortSFPVendorOUI,
tmnxPortSFPVendorManufactureDate,
tmnxPortSFPMedia,
tmnxPortSFPEquipped,
tmnxPortSFPVendorSerialNum,
tmnxPortSFPVendorPartNum,
tmnxPortEquipped,
tmnxPortLinkStatus,
tmnxPortAdminStatus,
tmnxPortOperStatus,
tmnxPortState,
tmnxPortPrevState,
tmnxPortNumAlarms,
tmnxPortAlarmState,
tmnxPortLastAlarmEvent,
tmnxPortClearAlarms,
tmnxPortLastStateChanged,
tmnxPortNumChannels,
tmnxPortNetworkEgrQueues,
tmnxPortIsLeaf,
tmnxPortChanType,
tmnxPortParentPortID,
tmnxPortLoadBalanceAlgorithm,
tmnxPortTypeName,
tmnxPortTypeDescription,
tmnxPortTypeStatus,
tmnxPortConnectTypeName,
tmnxPortConnectTypeDescription,
tmnxPortConnectTypeStatus,
tmnxChannelPortID,
tmnxPortOpticalCompliance,
tmnxL4LoadBalancing
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of physical port
capabilities for revision 4.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 35 }
tmnxObsoleteGroupV5v0 OBJECT-GROUP
OBJECTS {
tmnxPortTransceiverCode
}
STATUS current
DESCRIPTION
"The group of objects obsoleted in the 7x50 SR series 5.0 release"
::= { tmnxPortGroups 36 }
tmnxPortSchedV5v0Group OBJECT-GROUP
OBJECTS {
tmnxPortEgrPortSchedPlcy,
tmnxPortSchedOverrideRowStatus,
tmnxPortSchedOverrideSchedName,
tmnxPortSchedOverrideLastChanged,
tmnxPortSchedOverrideMaxRate,
tmnxPortSchedOverrideLvl1PIR,
tmnxPortSchedOverrideLvl1CIR,
tmnxPortSchedOverrideLvl2PIR,
tmnxPortSchedOverrideLvl2CIR,
tmnxPortSchedOverrideLvl3PIR,
tmnxPortSchedOverrideLvl3CIR,
tmnxPortSchedOverrideLvl4PIR,
tmnxPortSchedOverrideLvl4CIR,
tmnxPortSchedOverrideLvl5PIR,
tmnxPortSchedOverrideLvl5CIR,
tmnxPortSchedOverrideLvl6PIR,
tmnxPortSchedOverrideLvl6CIR,
tmnxPortSchedOverrideLvl7PIR,
tmnxPortSchedOverrideLvl7CIR,
tmnxPortSchedOverrideLvl8PIR,
tmnxPortSchedOverrideLvl8CIR,
tmnxPortSchedOverrideFlags
}
STATUS current
DESCRIPTION
"The group of objects supporting management of physical port
virtual scheduler capabilities for revision 5.0 on Alcatel
7x50 SR series systems."
::= { tmnxPortGroups 37 }
tmnxPortEthernetV5v0Group OBJECT-GROUP
OBJECTS { tmnxPortEtherMTU,
tmnxPortEtherDuplex,
tmnxPortEtherSpeed,
tmnxPortEtherAutoNegotiate,
tmnxPortEtherOperDuplex,
tmnxPortEtherOperSpeed,
tmnxPortEtherAcctPolicyId,
tmnxPortEtherCollectStats,
tmnxPortEtherMDIMDIX,
tmnxPortEtherXGigMode,
tmnxPortEtherEgressRate,
tmnxPortEtherDot1qEtype,
tmnxPortEtherQinqEtype,
tmnxPortEtherIngressRate,
tmnxPortEtherReportAlarm,
tmnxPortEtherReportAlarmStatus,
tmnxPortEtherPkts1519toMax,
tmnxPortEtherHCOverPkts1519toMax,
tmnxPortEtherHCPkts1519toMax,
tmnxPortEtherLacpTunnel
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Ethernet ports
for revision 5.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 38 }
tmnxPortGroupV5v0 OBJECT-GROUP
OBJECTS { tmnxPortTableLastChange,
tmnxPortLastChangeTime,
tmnxPortType,
tmnxPortClass,
tmnxPortDescription,
tmnxPortName,
tmnxPortAlias,
tmnxPortUserAssignedMac,
tmnxPortMacAddress,
tmnxPortHwMacAddress,
tmnxPortMode,
tmnxPortEncapType,
tmnxPortLagId,
tmnxPortHoldTimeUp,
tmnxPortHoldTimeDown,
tmnxPortUpProtocols,
tmnxPortConnectorType,
tmnxPortTransceiverType,
tmnxPortTransceiverCode,
tmnxPortTransceiverLaserWaveLen,
tmnxPortTransceiverDiagCapable,
tmnxPortTransceiverModelNumber,
tmnxPortSFPConnectorCode,
tmnxPortSFPVendorOUI,
tmnxPortSFPVendorManufactureDate,
tmnxPortSFPMedia,
tmnxPortSFPEquipped,
tmnxPortSFPVendorSerialNum,
tmnxPortSFPVendorPartNum,
tmnxPortEquipped,
tmnxPortLinkStatus,
tmnxPortAdminStatus,
tmnxPortOperStatus,
tmnxPortState,
tmnxPortPrevState,
tmnxPortNumAlarms,
tmnxPortAlarmState,
tmnxPortLastAlarmEvent,
tmnxPortClearAlarms,
tmnxPortLastStateChanged,
tmnxPortNumChannels,
tmnxPortNetworkEgrQueues,
tmnxPortIsLeaf,
tmnxPortChanType,
tmnxPortParentPortID,
tmnxPortLoadBalanceAlgorithm,
tmnxPortTypeName,
tmnxPortTypeDescription,
tmnxPortTypeStatus,
tmnxPortConnectTypeName,
tmnxPortConnectTypeDescription,
tmnxPortConnectTypeStatus,
tmnxChannelPortID,
tmnxPortOpticalCompliance,
tmnxL4LoadBalancing,
tmnxPortLastClearedTime
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of physical port
capabilities for revision 5.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 39 }
tmnxMlBundleGroupV5v0 OBJECT-GROUP
OBJECTS { tmnxBundleRowStatus,
tmnxBundleType,
tmnxBundleMinimumLinks,
tmnxBundleNumLinks,
tmnxBundleNumActiveLinks,
tmnxBundleMRRU,
tmnxBundleOperMRRU,
tmnxBundlePeerMRRU,
tmnxBundleOperMTU,
tmnxBundleRedDiffDelay,
tmnxBundleRedDiffDelayAction,
tmnxBundleYellowDiffDelay,
tmnxBundleShortSequence,
tmnxBundleLastChangeTime,
tmnxBundleFragmentThreshold,
tmnxBundleUpTime,
tmnxBundleMemberRowStatus,
tmnxBundleMemberActive,
tmnxBundleMemberDownReason,
tmnxBundleMemberUpTime,
tmnxBundleInputDiscards,
tmnxBundlePrimaryMemberPortID,
tmnxBundleLFI,
tmnxPortBundleNumber,
tmnxBundleProtectedType,
tmnxBundleParentBundle,
tmnxBPGrpAssocWorkingBundleID,
tmnxBPGrpAssocProtectBundleID,
tmnxBPGrpAssocActiveBundleID
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management MLBUNDLES
for revision 5.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 40 }
tmnxPortNotificationGroupV5v0 NOTIFICATION-GROUP
NOTIFICATIONS { tmnxEqPortSonetAlarm,
tmnxEqPortSonetAlarmClear,
tmnxEqPortSonetPathAlarm,
tmnxEqPortSonetPathAlarmClear,
tmnxEqPortSFPInserted,
tmnxEqPortSFPRemoved,
tmnxEqPortSFPCorrupted,
tmnxEqPortError,
tmnxEqPortDS3Alarm,
tmnxEqPortDS3AlarmClear,
tmnxEqPortDS1Alarm,
tmnxEqPortDS1AlarmClear,
tmnxEqPortBndlYellowDiffExceeded,
tmnxEqPortBndlRedDiffExceeded,
tmnxEqPortBndlBadEndPtDiscr,
tmnxEqPortEtherAlarm,
tmnxEqPortEtherAlarmClear,
tmnxDS1E1LoopbackStarted,
tmnxDS1E1LoopbackStopped,
tmnxDS3E3LoopbackStarted,
tmnxDS3E3LoopbackStopped,
tmnxSonetSDHLoopbackStarted,
tmnxSonetSDHLoopbackStopped,
tmnxEqPortSpeedCfgNotCompatible,
tmnxEqPortDuplexCfgNotCompatible,
tmnxEqPortIngressRateCfgNotCompatible
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the management of physical
ports for revision 5.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 41 }
tmnxPortTDMGroupV5v0 OBJECT-GROUP
OBJECTS { tmnxDS3ChannelAcctPolicyId,
tmnxDS3ChannelCollectStats,
tmnxDS3Buildout,
tmnxDS3Type,
tmnxDS3LastChangeTime,
tmnxDS3ChannelRowStatus,
tmnxDS3ChannelType,
tmnxDS3ChannelFraming,
tmnxDS3ChannelClockSource,
tmnxDS3ChannelChannelized,
tmnxDS3ChannelSubrateCSUMode,
tmnxDS3ChannelSubrate,
tmnxDS3ChannelIdleCycleFlags,
tmnxDS3ChannelLoopback,
tmnxDS3ChannelBitErrorInsertionRate,
tmnxDS3ChannelBERTPattern,
tmnxDS3ChannelBERTDuration,
tmnxDS3ChannelMDLEicString,
tmnxDS3ChannelMDLLicString,
tmnxDS3ChannelMDLFicString,
tmnxDS3ChannelMDLUnitString,
tmnxDS3ChannelMDLPfiString,
tmnxDS3ChannelMDLPortString,
tmnxDS3ChannelMDLGenString,
tmnxDS3ChannelMDLMessageType,
tmnxDS3ChannelFEACLoopRespond,
tmnxDS3ChannelCRC,
tmnxDS3ChannelMTU,
tmnxDS3ChannelOperMTU,
tmnxDS3ChannelReportAlarm,
tmnxDS3ChannelReportAlarmStatus,
tmnxDS3ChannelLastChangeTime,
tmnxDS3ChannelInFEACLoop,
tmnxDS3ChannelMDLMonPortString,
tmnxDS3ChannelMDLMonGenString,
tmnxDS3ChannelBERTOperStatus,
tmnxDS3ChannelBERTSynched,
tmnxDS3ChannelBERTErrors,
tmnxDS3ChannelBERTTotalBits,
tmnxDS3ChannelScramble,
tmnxDS1RowStatus,
tmnxDS1Type,
tmnxDS1Framing,
tmnxDS1Loopback,
tmnxDS1InvertData,
tmnxDS1BitErrorInsertionRate,
tmnxDS1BERTPattern,
tmnxDS1BERTDuration,
tmnxDS1ReportAlarm,
tmnxDS1ReportAlarmStatus,
tmnxDS1LastChangeTime,
tmnxDS1ClockSource,
tmnxDS1BERTOperStatus,
tmnxDS1BERTSynched,
tmnxDS1BERTErrors,
tmnxDS1BERTTotalBits,
tmnxDS1RemoteLoopRespond,
tmnxDS1InRemoteLoop,
tmnxDS0ChanGroupRowStatus,
tmnxDS0ChanGroupTimeSlots,
tmnxDS0ChanGroupSpeed,
tmnxDS0ChanGroupCRC,
tmnxDS0ChanGroupMTU,
tmnxDS0ChanGroupOperMTU,
tmnxDS0ChanGroupLastChangeTime,
tmnxDS0ChanGroupIdleCycleFlags,
tmnxDS0ChanGroupScramble
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of TDM type ports
for version 5.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 42 }
tmnx7710PortTDMGroupV5v0 OBJECT-GROUP
OBJECTS {
tmnxDS1PortBuildout,
tmnxDS1PortLastChangeTime,
tmnxDS1PortType,
tmnxDS1PortLineLength,
tmnxDS1PortLbo,
tmnxDS1PortDbGain,
tmnxDS1InsertSingleBitError,
tmnxDS0ChanGroupAcctPolicyId,
tmnxDS0ChanGroupCollectStats
}
STATUS current
DESCRIPTION
"The group of objects supporting management of TDM type ports
specific to the revision 5.0 on Alcatel 7710 SR series systems."
::= { tmnxPortGroups 43 }
tmnxPortCemGroupV6v0 OBJECT-GROUP
OBJECTS {
tmnxDS3ChannelClockSyncState,
tmnxDS3ChannelClockMasterPortId,
tmnxDS1SignalMode,
tmnxDS1ClockSyncState,
tmnxDS1ClockMasterPortId,
tmnxDS0ChanGroupPayloadFillType,
tmnxDS0ChanGroupPayloadPattern,
tmnxDS0ChanGroupSignalFillType,
tmnxDS0ChanGroupSignalPattern
}
STATUS current
DESCRIPTION
"The group of objects supporting management of CEM encapsulation TDM
type ports specific to the Alcatel 7750 and 7710 SR series systems
for revision 6.0."
::= { tmnxPortGroups 44 }
tmnxMcMlpppBundleGroup OBJECT-GROUP
OBJECTS { tmnxBundleMlpppClassCount,
tmnxBundleMlpppIngQoSProfId,
tmnxBundleMlpppEgrQoSProfId,
tmnxMcMlpppStatsIngressOct,
tmnxMcMlpppStatsIngressPkt,
tmnxMcMlpppStatsIngressErrPkt,
tmnxMcMlpppStatsEgressOct,
tmnxMcMlpppStatsEgressPkt,
tmnxMcMlpppStatsEgressErrPkt
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MClass MLPPP BUNDLES
for revision 6.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 45 }
tmnxPortNotificationGroupV6v0 NOTIFICATION-GROUP
NOTIFICATIONS { tmnxEqPortSonetAlarm,
tmnxEqPortSonetAlarmClear,
tmnxEqPortSonetPathAlarm,
tmnxEqPortSonetPathAlarmClear,
tmnxEqPortSFPInserted,
tmnxEqPortSFPRemoved,
tmnxEqPortError,
tmnxEqPortDS3Alarm,
tmnxEqPortDS3AlarmClear,
tmnxEqPortDS1Alarm,
tmnxEqPortDS1AlarmClear,
tmnxEqPortBndlYellowDiffExceeded,
tmnxEqPortBndlRedDiffExceeded,
tmnxEqPortBndlBadEndPtDiscr,
tmnxEqPortEtherAlarm,
tmnxEqPortEtherAlarmClear,
tmnxDS1E1LoopbackStarted,
tmnxDS1E1LoopbackStopped,
tmnxDS3E3LoopbackStarted,
tmnxDS3E3LoopbackStopped,
tmnxSonetSDHLoopbackStarted,
tmnxSonetSDHLoopbackStopped,
tmnxEqPortEtherLoopDetected,
tmnxEqPortEtherLoopCleared,
tmnxEqPortSpeedCfgNotCompatible,
tmnxEqPortDuplexCfgNotCompatible,
tmnxEqPortIngressRateCfgNotCompatible,
tmnxEqDigitalDiagMonitorFailure,
tmnxEqPortSFPStatusFailure
}
STATUS current
DESCRIPTION
"The group of notifications supporting the management of physical
ports for revision 6.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 46 }
tmnxPortEthernetV6v0Group OBJECT-GROUP
OBJECTS { tmnxPortEtherMTU,
tmnxPortEtherDuplex,
tmnxPortEtherSpeed,
tmnxPortEtherAutoNegotiate,
tmnxPortEtherOperDuplex,
tmnxPortEtherOperSpeed,
tmnxPortEtherAcctPolicyId,
tmnxPortEtherCollectStats,
tmnxPortEtherMDIMDIX,
tmnxPortEtherXGigMode,
tmnxPortEtherEgressRate,
tmnxPortEtherDot1qEtype,
tmnxPortEtherQinqEtype,
tmnxPortEtherIngressRate,
tmnxPortEtherReportAlarm,
tmnxPortEtherReportAlarmStatus,
tmnxPortEtherPkts1519toMax,
tmnxPortEtherHCOverPkts1519toMax,
tmnxPortEtherHCPkts1519toMax,
tmnxPortEtherLacpTunnel,
tmnxPortEtherDownWhenLoopedEnabled,
tmnxPortEtherDownWhenLoopedKeepAlive,
tmnxPortEtherDownWhenLoopedRetry,
tmnxPortEtherDownWhenLoopedState,
tmnxPortEtherPBBEtype,
tmnxPortEtherReasonDownFlags
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Ethernet ports
for revision 6.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 47 }
tmnxMlBundleGroupV6v0 OBJECT-GROUP
OBJECTS { tmnxBundleRowStatus,
tmnxBundleType,
tmnxBundleMinimumLinks,
tmnxBundleNumLinks,
tmnxBundleNumActiveLinks,
tmnxBundleRedDiffDelay,
tmnxBundleRedDiffDelayAction,
tmnxBundleLastChangeTime,
tmnxBundleFragmentThreshold,
tmnxBundleUpTime,
tmnxBundleMemberRowStatus,
tmnxBundleMemberActive,
tmnxBundleMemberDownReason,
tmnxBundleMemberUpTime,
tmnxBundleInputDiscards,
tmnxBundlePrimaryMemberPortID,
tmnxPortBundleNumber,
tmnxBundleProtectedType,
tmnxBundleParentBundle,
tmnxBPGrpAssocWorkingBundleID,
tmnxBPGrpAssocProtectBundleID,
tmnxBPGrpAssocActiveBundleID
}
STATUS current
DESCRIPTION
"The group of objects supporting management MLBUNDLES
for revision 6.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 48 }
tmnxMlpppBundleGroup OBJECT-GROUP
OBJECTS {
tmnxBundleMlpppEndpointID,
tmnxBundleMlpppEndpointIDClass,
tmnxBundleYellowDiffDelay,
tmnxBundleShortSequence,
tmnxBundleMRRU,
tmnxBundleOperMRRU,
tmnxBundlePeerMRRU,
tmnxBundleOperMTU,
tmnxBundleLFI
}
STATUS current
DESCRIPTION
"The group of objects supporting management of MLPPP Bundles
on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 49 }
tmnxPortNotificationGroupV3v0 NOTIFICATION-GROUP
NOTIFICATIONS { tmnxEqPortSonetAlarm,
tmnxEqPortSonetAlarmClear,
tmnxEqPortSonetPathAlarm,
tmnxEqPortSonetPathAlarmClear,
tmnxEqPortSFPInserted,
tmnxEqPortSFPRemoved,
tmnxEqPortSFPCorrupted,
tmnxEqPortError,
tmnxEqPortDS3Alarm,
tmnxEqPortDS3AlarmClear,
tmnxEqPortDS1Alarm,
tmnxEqPortDS1AlarmClear,
tmnxEqPortBndlYellowDiffExceeded,
tmnxEqPortBndlRedDiffExceeded,
tmnxEqPortBndlBadEndPtDiscr,
tmnxEqPortEtherAlarm,
tmnxEqPortEtherAlarmClear,
tmnxEqPortSpeedCfgNotCompatible,
tmnxEqPortDuplexCfgNotCompatible,
tmnxEqPortIngressRateCfgNotCompatible
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the management of physical
ports for revision 3.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 50 }
tmnxPortTDMGroupV6v0 OBJECT-GROUP
OBJECTS { tmnxDS3ChannelAcctPolicyId,
tmnxDS3ChannelCollectStats,
tmnxDS3Buildout,
tmnxDS3Type,
tmnxDS3LastChangeTime,
tmnxDS3ChannelRowStatus,
tmnxDS3ChannelType,
tmnxDS3ChannelFraming,
tmnxDS3ChannelClockSource,
tmnxDS3ChannelChannelized,
tmnxDS3ChannelSubrateCSUMode,
tmnxDS3ChannelSubrate,
tmnxDS3ChannelIdleCycleFlags,
tmnxDS3ChannelLoopback,
tmnxDS3ChannelBitErrorInsertionRate,
tmnxDS3ChannelBERTPattern,
tmnxDS3ChannelBERTDuration,
tmnxDS3ChannelMDLEicString,
tmnxDS3ChannelMDLLicString,
tmnxDS3ChannelMDLFicString,
tmnxDS3ChannelMDLUnitString,
tmnxDS3ChannelMDLPfiString,
tmnxDS3ChannelMDLPortString,
tmnxDS3ChannelMDLGenString,
tmnxDS3ChannelMDLMessageType,
tmnxDS3ChannelFEACLoopRespond,
tmnxDS3ChannelCRC,
tmnxDS3ChannelMTU,
tmnxDS3ChannelOperMTU,
tmnxDS3ChannelReportAlarm,
tmnxDS3ChannelReportAlarmStatus,
tmnxDS3ChannelLastChangeTime,
tmnxDS3ChannelInFEACLoop,
tmnxDS3ChannelMDLMonPortString,
tmnxDS3ChannelMDLMonGenString,
tmnxDS3ChannelBERTOperStatus,
tmnxDS3ChannelBERTSynched,
tmnxDS3ChannelBERTErrors,
tmnxDS3ChannelBERTTotalBits,
tmnxDS3ChannelScramble,
tmnxDS1RowStatus,
tmnxDS1Type,
tmnxDS1Framing,
tmnxDS1Loopback,
tmnxDS1InvertData,
tmnxDS1BitErrorInsertionRate,
tmnxDS1BERTPattern,
tmnxDS1BERTDuration,
tmnxDS1ReportAlarm,
tmnxDS1ReportAlarmStatus,
tmnxDS1LastChangeTime,
tmnxDS1ClockSource,
tmnxDS1BERTOperStatus,
tmnxDS1BERTSynched,
tmnxDS1BERTErrors,
tmnxDS1BERTTotalBits,
tmnxDS1RemoteLoopRespond,
tmnxDS1InRemoteLoop,
tmnxDS1BerSdThreshold,
tmnxDS1BerSfThreshold,
tmnxDS0ChanGroupRowStatus,
tmnxDS0ChanGroupTimeSlots,
tmnxDS0ChanGroupSpeed,
tmnxDS0ChanGroupCRC,
tmnxDS0ChanGroupMTU,
tmnxDS0ChanGroupOperMTU,
tmnxDS0ChanGroupLastChangeTime,
tmnxDS0ChanGroupIdleCycleFlags,
tmnxDS0ChanGroupScramble
}
STATUS current
DESCRIPTION
"The group of objects supporting management of TDM type ports
for version 6.0 on the Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 52 }
tmnxDigitalDiagMonitorGroup OBJECT-GROUP
OBJECTS {
tmnxDDMTemperature,
tmnxDDMTempLowWarning,
tmnxDDMTempLowAlarm,
tmnxDDMTempHiWarning,
tmnxDDMTempHiAlarm,
tmnxDDMSupplyVoltage,
tmnxDDMSupplyVoltageLowWarning,
tmnxDDMSupplyVoltageLowAlarm,
tmnxDDMSupplyVoltageHiWarning,
tmnxDDMSupplyVoltageHiAlarm,
tmnxDDMTxBiasCurrent,
tmnxDDMTxBiasCurrentLowWarning,
tmnxDDMTxBiasCurrentLowAlarm,
tmnxDDMTxBiasCurrentHiWarning,
tmnxDDMTxBiasCurrentHiAlarm,
tmnxDDMTxOutputPower,
tmnxDDMTxOutputPowerLowWarning,
tmnxDDMTxOutputPowerLowAlarm,
tmnxDDMTxOutputPowerHiWarning,
tmnxDDMTxOutputPowerHiAlarm,
tmnxDDMRxOpticalPower,
tmnxDDMRxOpticalPowerLowWarning,
tmnxDDMRxOpticalPowerLowAlarm,
tmnxDDMRxOpticalPowerHiWarning,
tmnxDDMRxOpticalPowerHiAlarm,
tmnxDDMRxOpticalPowerType,
tmnxDDMAux1,
tmnxDDMAux1LowWarning,
tmnxDDMAux1LowAlarm,
tmnxDDMAux1HiWarning,
tmnxDDMAux1HiAlarm,
tmnxDDMAux1Type,
tmnxDDMAux2,
tmnxDDMAux2LowWarning,
tmnxDDMAux2LowAlarm,
tmnxDDMAux2HiWarning,
tmnxDDMAux2HiAlarm,
tmnxDDMAux2Type,
tmnxDDMFailedThresholds,
tmnxDDMExternallyCalibrated,
tmnxDDMExtCalRxPower4,
tmnxDDMExtCalRxPower3,
tmnxDDMExtCalRxPower2,
tmnxDDMExtCalRxPower1,
tmnxDDMExtCalRxPower0,
tmnxDDMExtCalTxLaserBiasSlope,
tmnxDDMExtCalTxLaserBiasOffset,
tmnxDDMExtCalTxPowerSlope,
tmnxDDMExtCalTxPowerOffset,
tmnxDDMExtCalTemperatureSlope,
tmnxDDMExtCalTemperatureOffset,
tmnxDDMExtCalVoltageSlope,
tmnxDDMExtCalVoltageOffset
}
STATUS current
DESCRIPTION
"The group of objects supporting the management of
Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on
Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 53 }
tmnxPortGroupV6v0 OBJECT-GROUP
OBJECTS { tmnxPortTableLastChange,
tmnxPortLastChangeTime,
tmnxPortType,
tmnxPortClass,
tmnxPortDescription,
tmnxPortName,
tmnxPortAlias,
tmnxPortUserAssignedMac,
tmnxPortMacAddress,
tmnxPortHwMacAddress,
tmnxPortMode,
tmnxPortEncapType,
tmnxPortLagId,
tmnxPortHoldTimeUp,
tmnxPortHoldTimeDown,
tmnxPortUpProtocols,
tmnxPortConnectorType,
tmnxPortTransceiverType,
tmnxPortTransceiverLaserWaveLen,
tmnxPortTransceiverDiagCapable,
tmnxPortTransceiverModelNumber,
tmnxPortSFPConnectorCode,
tmnxPortSFPVendorOUI,
tmnxPortSFPVendorManufactureDate,
tmnxPortSFPMedia,
tmnxPortSFPEquipped,
tmnxPortSFPVendorSerialNum,
tmnxPortSFPVendorPartNum,
tmnxPortEquipped,
tmnxPortLinkStatus,
tmnxPortAdminStatus,
tmnxPortOperStatus,
tmnxPortState,
tmnxPortPrevState,
tmnxPortNumAlarms,
tmnxPortAlarmState,
tmnxPortLastAlarmEvent,
tmnxPortClearAlarms,
tmnxPortLastStateChanged,
tmnxPortNumChannels,
tmnxPortNetworkEgrQueues,
tmnxPortIsLeaf,
tmnxPortChanType,
tmnxPortParentPortID,
tmnxPortLoadBalanceAlgorithm,
tmnxPortTypeName,
tmnxPortTypeDescription,
tmnxPortTypeStatus,
tmnxPortConnectTypeName,
tmnxPortConnectTypeDescription,
tmnxPortConnectTypeStatus,
tmnxChannelPortID,
tmnxPortOpticalCompliance,
tmnxL4LoadBalancing,
tmnxPortLastClearedTime,
tmnxPortDDMEventSuppression,
tmnxPortSFPStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting management of physical port
capabilities for revision 6.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 54 }
tmnxNamedPoolGroupV6v0 OBJECT-GROUP
OBJECTS {
tmnxPortIngNamedPoolPlcy,
tmnxPortEgrNamedPoolPlcy,
tmnxPortIngPoolPercentRate,
tmnxPortEgrPoolPercentRate
}
STATUS current
DESCRIPTION
"The group of objects supporting the Named Pool feature
for revision 6.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 55 }
tmnxPortNotifyObjsGroupV6v0 OBJECT-GROUP
OBJECTS {
tmnxDDMFailedObject
}
STATUS current
DESCRIPTION
"The group of objects supporting physical port notifications
for revision 6.0 on Alcatel 7x50 SR series systems."
::= { tmnxPortGroups 57 }
END