mibs/nokia/aos7/ALCATEL-IND1-TIMETRA-QOS-MIB
ALCATEL-IND1-TIMETRA-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, IpAddress, Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, RowStatus,
MacAddress, TruthValue,
StorageType, TimeStamp
FROM SNMPv2-TC
AtmServiceCategory, AtmTrafficDescrParamIndex
FROM ATM-TC-MIB
InetAddress, InetAddressType,
InetAddressIPv6, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
timetraSRMIBModules, tmnxSRObjs,
tmnxSRNotifyPrefix, tmnxSRConfs
FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB
Dot1PPriority, IpAddressPrefixLength,
ServiceAccessPoint,TItemDescription,
TNamedItem, TNamedItemOrEmpty,
TDSCPValue, TDSCPName, TDSCPNameOrEmpty,
TIpProtocol, TTcpUdpPort,
TTcpUdpPortOperator, TFrameType, TFCName, TFCNameOrEmpty,
TLspExpValue, TQueueId, TIngressQueueId,
TEgressQueueId, TPortSchedulerPIR,
TPortSchedulerCIR,
TWeight, TCIRRate, TPIRRate, TPIRRateOrZero,
TmnxEnabledDisabled, TPolicyID,
TSapIngressPolicyID, TSapEgressPolicyID
FROM ALCATEL-IND1-TIMETRA-TC-MIB
;
timetraQosMIBModule MODULE-IDENTITY
LAST-UPDATED "0801010000Z"
ORGANIZATION "Alcatel"
CONTACT-INFO
"Alcatel 7x50 Support
Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision
Quality of Service features on Alcatel 7x50 systems.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's
proprietary intellectual property. Alcatel retains
all title and ownership in the Specification, including any
revisions.
Alcatel grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
--
-- Revision History
--
REVISION "0801010000Z"
DESCRIPTION "Rev 6.0 01 Jan 2008 00:00
6.0 release of the TIMETRA-QOS-MIB."
REVISION "0701010000Z"
DESCRIPTION "Rev 5.0 01 Jan 2007 00:00
5.0 release of the TIMETRA-QOS-MIB."
REVISION "0602280000Z"
DESCRIPTION "Rev 4.0 28 Feb 2006 00:00
4.0 release of the TIMETRA-QOS-MIB."
REVISION "0508310000Z"
DESCRIPTION "Rev 3.0 31 Aug 2005 00:00
3.0 release of the TIMETRA-QOS-MIB."
REVISION "0501240000Z"
DESCRIPTION "Rev 2.1 24 Jan 2005 00:00
2.1 release of the TIMETRA-QOS-MIB."
REVISION "0401150000Z"
DESCRIPTION "Rev 2.0 15 Jan 2004 00:00
2.0 release of the TIMETRA-QOS-MIB."
REVISION "0308150000Z"
DESCRIPTION "Rev 1.2 15 Aug 2003 00:00
1.2 release of the TIMETRA-QOS-MIB."
REVISION "200301200000Z"
DESCRIPTION "Rev 1.0 20 Jan 2003 00:00
1.0 Release of the TIMETRA-QOS-MIB."
REVISION "200105290000Z"
DESCRIPTION "Rev 0.1 29 May 2001 00:00
Initial version of the TIMETRA-QOS-MIB."
::= { timetraSRMIBModules 16 }
tQosObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 16 }
tQosNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 16}
tQosNotifications OBJECT IDENTIFIER ::= { tQosNotifyPrefix 0}
tmnxQosConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 16 }
tDSCPObjects OBJECT IDENTIFIER ::= { tQosObjects 1 }
tFCObjects OBJECT IDENTIFIER ::= { tQosObjects 2 }
tSapIngressObjects OBJECT IDENTIFIER ::= { tQosObjects 3 }
tSapEgressObjects OBJECT IDENTIFIER ::= { tQosObjects 4 }
tNetworkObjects OBJECT IDENTIFIER ::= { tQosObjects 5 }
tNetworkQueueObjects OBJECT IDENTIFIER ::= { tQosObjects 6 }
tSharedQueueObjects OBJECT IDENTIFIER ::= { tQosObjects 7 }
tSlopeObjects OBJECT IDENTIFIER ::= { tQosObjects 10 }
tSchedulerObjects OBJECT IDENTIFIER ::= { tQosObjects 12 }
tQosTimeStampObjects OBJECT IDENTIFIER ::= { tQosObjects 20 }
tAtmTdpObjects OBJECT IDENTIFIER ::= { tQosObjects 21 }
tPoolObjects OBJECT IDENTIFIER ::= { tQosObjects 22 }
--
-- TEXTUAL-CONVENTIONs for Alcatel 7x50 SR series QoS Elements
--
TNetworkPolicyID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"the identification number of a network policy."
SYNTAX Unsigned32 (1..65535)
TItemScope ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual-convention determines some aspects of an item's
behavior regarding creation and use, unused entry garbage collection,
and automated promulgation by Element Management System to
other systems in the service domain.
TItemScope applies to SAP-ingress, SAP-egress, and Network policies,
and to IP filters and MAC filters.
exclusive:
When the scope of an item is defined as exclusive, the item can
only be applied once, for example to a single SAP. Attempting
to assign the policy to a second SAP is not allowed and will
result in an error. If the item is removed from the exclusive
SAP, it will become available for assignment to another
exclusive SAP.
A non-applied exclusive scope policy is a candidate to be removed
from the system by a TBD garbage collection command.
The system default policies cannot be put into the exclusive scope.
An error will be generated if scope exclusive is executed in
any policies with a policy-id equal to 1.
template:
When the scope of an item is defined as template, the item can be
applied any number of times. Policies with template scope
will not be considered for deletion by a TBD garbage collection
command; all items of scope 'template' must be deleted explicitly.
The system default policies will always be scope template.
An error will occur if a policy-id 1 is attempted to be
set to scope exclusive."
SYNTAX INTEGER { exclusive(1), template(2) }
TItemMatch ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"when set to off, the item is not matched.
when set to false, packets without the item match the filter.
when set to true, packets with the item match the filter."
SYNTAX INTEGER { off(1), false(2), true(3) }
TPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"the priority to apply to a packet"
SYNTAX INTEGER { low(1), high(2) }
TPriorityOrDefault ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"the priority to apply to a packet.
when set to default(3), the priority from the default-action is used."
SYNTAX INTEGER { low(1), high(2), default(3) }
TProfile ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"the profile marking of a packet at the ingress."
SYNTAX INTEGER { in(1), out(2) }
TDEProfile ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual-convention specifies the profile marking of a packet.
Value of 'in' specifies the in-profile marking.
Value of 'out' specifies the out-profile marking.
Value of 'de' specifies that the profile marking will be based on the DE
(Drop-Eligible) bit. DE bit-value of '0' specifies in-profile and DE
bit value of '1' specifies out-profile marking."
SYNTAX INTEGER { in (1), out (2), de (3) }
TProfileOrNone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Profile marking of a packet."
SYNTAX INTEGER { none (0), in(1), out(2) }
TAdaptationRule ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The adaptation rule to be applied to calcluate the operational values
for the specified entity."
SYNTAX INTEGER {
max (1),
min (2),
closest(3)
}
TRemarkType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The remarking to be used."
SYNTAX INTEGER {
none (1),
dscp (2),
precedence (3)
}
TPrecValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The precedence bits as used in the IPv4 header. This constitutes of
3 bits and hence can hold the values from 0 to 7."
SYNTAX Integer32 (0..7)
TPrecValueOrNone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The precedence bits as used in the IPv4 header. This constitutes of
3 bits and hence can hold the values from 0 to 7. The value '-1'
specifies that the precedence value is undefined/unused."
SYNTAX Integer32 (-1 | 0..7)
TBurstSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The amount of buffer space (in kbytes) assigned to a queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value."
SYNTAX Integer32 (-1 | 0..131072)
TBurstPercent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The percentage of buffer space assigned to a queue that is
reserved for some purpose."
SYNTAX Integer32 (0..100)
TBurstHundredthsOfPercent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The percentage of buffer space assigned to a queue that is
reserved for some purpose, defined to two decimal places."
SYNTAX Integer32 (0..10000)
TBurstPercentOrDefault ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The percentage of buffer space assigned to a queue that is
reserved for some purpose.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value."
SYNTAX Integer32 (-1 | 0..100)
TRatePercent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The percentage of maximum rate allowed."
SYNTAX Integer32 (0..100)
TPIRRatePercent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The percentage of maximum PIR rate allowed. A value of 0 is
no acceptable, so the range begins at 1."
SYNTAX Integer32 (1..100)
TLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The level of the specified entity while feeding into the parent."
SYNTAX Integer32 (1..8)
TLevelOrDefault ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The level of the specified entity while feeding into the parent.
The value 0 is used to denote a default value."
SYNTAX Integer32 (0|1..8)
TQueueMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The mode in which the queue is operating.
If the queue is operating in the 'priority' mode, it is
capable of handling traffic differently with two distinct
priorities. These priorities are assigned by the stages
preceding the queueing framework in the system.
When the queue is operating in the 'profile' mode, in other
words the color aware mode, the queue tries to provide the
appropriate bandwidth to the packets with different profiles.
The profiles are assigned according to the configuration of the
forwarding class or the sub-forwarding class.
In 'priority' mode, the queue does not have the functionality
to support the profiled traffic and in such cases the queue
will have a degraded performance. However, the converse is not
valid and a queue in 'profile' mode should be capable of
supporting the different priorities of traffic."
SYNTAX INTEGER {
priority(1),
profile (2)
}
TEntryIndicator ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Uniquely identifies an entry in a policy or filter table. The
value 0 is not a valid entry-id. When used as insertion point
the value 0 indicates that entries must be inserted at the very
beginning, i.e.before the first entry defined."
SYNTAX Unsigned32 (0..65535)
TEntryId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"uniquely identifies an entry in a policy or filter table.
to facilitate insertion of entries in the tables, we recommend
assigning entry IDs by 10s: 10, 20, 30, etc. "
SYNTAX Unsigned32 (1..65535)
TMatchCriteria ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"determines whether the entry matches traffic using IP match
entries or MAC match entries."
SYNTAX INTEGER { ip(1), mac(2), none(3) }
TAtmTdpDescrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TAtmTdpDescrType is an enumerated integer whose value
indicates the types of cell loss priority to be used in
conjunction with traffic parameters.
The following values are outlined:
Integer Value Interpretation
------------- ------------------------
clp0And1pcr PCR applies to CLP 0 and
CLP 1 cell flows
clp0And1pcrPlusClp0And1scr PCR applies to CLP 0 and
CLP 1 cell flows.
SCR applies to CLP 0 and
CLP 1 cell flows.
clp0And1pcrPlusClp0scr PCR applies to CLP 0 and
CLP 1 cell flows.
SCR applies to CLP 0 cell flows.
clp0And1pcrPlusClp0scrTag PCR applies to CLP 0 and
CLP 1 cell flows.
SCR applies to CLP 0 cell flows. "
SYNTAX INTEGER {
clp0And1pcr(0),
clp0And1pcrPlusClp0And1scr(1),
clp0And1pcrPlusClp0scr(2),
clp0And1pcrPlusClp0scrTag(3)
}
TDEValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual-convention specifies the DE (Drop Eligible) bit value.
The value of '-1' means DE value is not specified."
SYNTAX Integer32 (-1 | 0..1)
--
--
-- mib objects
--
--
-- DSCP Name -> DSCP value mapping table
--
tDSCPNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF TDSCPNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all DSCP Names. DSCP Name entries must
exist here and be active before they can be referenced
elsewhere (e.g. IP filter)."
::= { tDSCPObjects 1 }
tDSCPNameEntry OBJECT-TYPE
SYNTAX TDSCPNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular DSCP Name, particularly
the DSCP value. It maps a DSCP Name into a DSCP value.
Some default entries are created by the agent.
Default entries have tDSCPNameStorageType permanent,
and can not be deleted.
Entries cannot be created by user but may be supported later.
An attempt to create a row in this table would return no creation."
INDEX { tDSCPName }
::= { tDSCPNameTable 1 }
TDSCPNameEntry ::= SEQUENCE
{
tDSCPName TDSCPName,
tDSCPNameRowStatus RowStatus,
tDSCPNameStorageType StorageType,
tDSCPNameDscpValue TDSCPValue,
tDSCPNameLastChanged TimeStamp
}
tDSCPName OBJECT-TYPE
SYNTAX TDSCPName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name assigned to the DSCP Value."
REFERENCE
""
::= { tDSCPNameEntry 1 }
tDSCPNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry."
::= { tDSCPNameEntry 2 }
tDSCPNameStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this row in the table."
DEFVAL { nonVolatile }
::= { tDSCPNameEntry 3 }
tDSCPNameDscpValue OBJECT-TYPE
SYNTAX TDSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP Value."
REFERENCE
""
DEFVAL { 0 }
::= { tDSCPNameEntry 4 }
tDSCPNameLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tDSCPNameTable."
::= { tDSCPNameEntry 5 }
--
-- Forwarding Class name table
--
tFCNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF TFCNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all Forwarding Class Names. Forwarding Class Name entries
must exist here and be active before they can be referenced
elsewhere (e.g. qos queue)."
::= { tFCObjects 1 }
tFCNameEntry OBJECT-TYPE
SYNTAX TFCNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Forwarding Class Name, particularly
the Forwarding Class value.
Some default entries are created by the agent.
Default entries have tFCStorageType permanent,
and can not be deleted.
Entries cannot be created by user but maybe supported in future.
An attempt to create a row in this table would return no creation."
INDEX { tFCName }
::= { tFCNameTable 1 }
TFCNameEntry ::= SEQUENCE
{
tFCName TFCName,
tFCRowStatus RowStatus,
tFCStorageType StorageType,
tFCValue Integer32,
tFCNameLastChanged TimeStamp
}
tFCName OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Forwarding class name."
REFERENCE ""
::= { tFCNameEntry 1 }
tFCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Row Status of the entry."
::= { tFCNameEntry 2 }
tFCStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type of this row in the table."
DEFVAL { nonVolatile }
::= { tFCNameEntry 3 }
tFCValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "FC Value."
REFERENCE ""
DEFVAL { 0 }
::= { tFCNameEntry 4 }
tFCNameLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tFCNameTable."
::= { tFCNameEntry 5 }
--
-- sap-ingress policy table
--
tSapIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tSapIngressObjects 1 }
tSapIngressEntry OBJECT-TYPE
SYNTAX TSapIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Sap Ingress Policy.
sap-ingress policy (1) is the default entry.
Default Entry is created by the agent, other entries are
created by user.
Default Entry cannot be modified/deleted. The other
entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
"
INDEX { tSapIngressIndex }
::= { tSapIngressTable 1 }
TSapIngressEntry ::= SEQUENCE
{
tSapIngressIndex TSapIngressPolicyID,
tSapIngressRowStatus RowStatus,
tSapIngressScope TItemScope,
tSapIngressDescription TItemDescription,
tSapIngressDefaultFC TNamedItem,
tSapIngressDefaultFCPriority TPriority,
tSapIngressMatchCriteria TMatchCriteria,
tSapIngressLastChanged TimeStamp
}
tSapIngressIndex OBJECT-TYPE
SYNTAX TSapIngressPolicyID (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the policy ID is the index to this table."
::= { tSapIngressEntry 1 }
tSapIngressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for the policy. The deletion of this row has
an action of removing the dependent rows in the following
tables :
- tSapIngressQueueTable
- tSapIngressDSCPTable
- tSapIngressDot1pTable
"
::= { tSapIngressEntry 2 }
tSapIngressScope OBJECT-TYPE
SYNTAX TItemScope
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Scope of the policy. If the scope is 'exclusive', it can only be
instantiated once whereas it could have multiple instances if defined
as 'exclusive'."
DEFVAL { template }
::= { tSapIngressEntry 3 }
tSapIngressDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"user-provided description of the policy."
DEFVAL { ''H }
::= { tSapIngressEntry 4 }
tSapIngressDefaultFC OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressDefaultFC specifies the forwarding class or the
sub forwarding class which should be used for all traffic that
does not match a specific classification specified in this
SAP ingress QoS policy.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
If not specified explicitly, all traffic will be classified
as best-effort 'be'."
DEFVAL { 'be'H }
::= { tSapIngressEntry 5 }
tSapIngressDefaultFCPriority OBJECT-TYPE
SYNTAX TPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the priority to assign to traffic ingressing as the default
action queue."
DEFVAL { low }
::= { tSapIngressEntry 6 }
tSapIngressMatchCriteria OBJECT-TYPE
SYNTAX TMatchCriteria
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicates which type of match criteria the policy should use.
when set to ip(1), the policy looks for match entries in
tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable.
When set to mac(2), the policy looks for match entries in
tSapIngressMacCriteriaTable.
the value of tSapIngressMatchCriteria is set when the first
match criteria table entry is created. the value is set to
none(3) when the last criteria table entry is removed.
when tSapIngressMatchCriteria is set to ip(1), no
tSapIngressMacCriteriaTable entries can be created.
when set to mac(2), no tSapIngressIPCriteriaTable or
tSapIngressIPv6CriteriaTable entries can be created.
"
::= { tSapIngressEntry 7 }
tSapIngressLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressTable."
::= { tSapIngressEntry 8 }
--
-- sap-ingress policy queue table
--
tSapIngressQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"information about all sap-ingress policies' queues."
::= { tSapIngressObjects 2 }
tSapIngressQueueEntry OBJECT-TYPE
SYNTAX TSapIngressQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular queue for a sap-ingress policy.
Queue (1) is the used as a default for unicast and queue (11) is
used as a default for multicast. Both these are created by the
agent and can be edited but not removed from the system.
Other entries are created by user."
INDEX { tSapIngressIndex, tSapIngressQueue }
::= { tSapIngressQueueTable 1 }
TSapIngressQueueEntry ::= SEQUENCE
{
tSapIngressQueue TIngressQueueId,
tSapIngressQueueRowStatus RowStatus,
tSapIngressQueueParent TNamedItemOrEmpty,
tSapIngressQueueLevel TLevel,
tSapIngressQueueWeight TWeight,
tSapIngressQueueCIRLevel TLevelOrDefault,
tSapIngressQueueCIRWeight TWeight,
tSapIngressQueueMCast TruthValue,
tSapIngressQueueExpedite INTEGER,
tSapIngressQueueCBS TBurstSize,
tSapIngressQueueMBS TBurstSize,
tSapIngressQueueHiPrioOnly TBurstPercentOrDefault,
tSapIngressQueuePIRAdaptation TAdaptationRule,
tSapIngressQueueCIRAdaptation TAdaptationRule,
tSapIngressQueueAdminPIR TPIRRate,
tSapIngressQueueAdminCIR TCIRRate,
tSapIngressQueueOperPIR TPIRRate,
tSapIngressQueueOperCIR TCIRRate,
tSapIngressQueueLastChanged TimeStamp,
tSapIngressQueuePoliced TruthValue,
tSapIngressQueueMode TQueueMode,
tSapIngressQueuePoolName TNamedItemOrEmpty
}
tSapIngressQueue OBJECT-TYPE
SYNTAX TIngressQueueId (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The queue ID is used as the secondary index to the table entry."
::= { tSapIngressQueueEntry 1 }
tSapIngressQueueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry. This allows creation/deletion of rows in this
table."
::= { tSapIngressQueueEntry 2 }
tSapIngressQueueParent OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The scheduler to which this queue would be feeding to."
DEFVAL { ''H }
::= { tSapIngressQueueEntry 3 }
tSapIngressQueueLevel OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent."
DEFVAL { 1 }
::= { tSapIngressQueueEntry 4 }
tSapIngressQueueWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used by the scheduler to which this queue
would be feeding to."
DEFVAL { 1 }
::= { tSapIngressQueueEntry 5 }
tSapIngressQueueCIRLevel OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for
the above CIR traffic."
DEFVAL { 0 }
::= { tSapIngressQueueEntry 6 }
tSapIngressQueueCIRWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to."
DEFVAL { 1 }
::= { tSapIngressQueueEntry 7 }
tSapIngressQueueMCast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if this is a multicast queue or not."
DEFVAL { false }
::= { tSapIngressQueueEntry 8 }
tSapIngressQueueExpedite OBJECT-TYPE
SYNTAX INTEGER {
expedited (1),
auto-expedited(2),
non-expedited (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this attribute should be
dynamically updated by looking at the forwarding classes mapping
into this queue. In such a case the queue is treated as
'non-expedited' if there is even a single non-expedited forwarding
class using this queue.
This attribute is associated with the queue at the time of creation and
cannot be modified thereafter."
DEFVAL { auto-expedited }
::= { tSapIngressQueueEntry 9 }
tSapIngressQueueCBS OBJECT-TYPE
SYNTAX TBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of reserved buffer space (in kilo bytes) for the queue."
DEFVAL { -1 }
::= { tSapIngressQueueEntry 10 }
tSapIngressQueueMBS OBJECT-TYPE
SYNTAX TBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum amount of buffer space (in kilo bytes) allowed for the
queue."
DEFVAL { -1 }
::= { tSapIngressQueueEntry 11 }
tSapIngressQueueHiPrioOnly OBJECT-TYPE
SYNTAX TBurstPercentOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of buffer space for the queue, used
exclusively by high priority packets."
DEFVAL { -1 }
::= { tSapIngressQueueEntry 12 }
tSapIngressQueuePIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset."
DEFVAL { closest }
::= { tSapIngressQueueEntry 13 }
tSapIngressQueueCIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset."
DEFVAL { closest }
::= { tSapIngressQueueEntry 14 }
tSapIngressQueueAdminPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative PIR specified by the user."
DEFVAL { -1 }
::= { tSapIngressQueueEntry 15 }
tSapIngressQueueAdminCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative CIR specified by the user."
DEFVAL { 0 }
::= { tSapIngressQueueEntry 16 }
tSapIngressQueueOperPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kbps"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The operating PIR."
::= { tSapIngressQueueEntry 17 }
tSapIngressQueueOperCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kbps"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The operational value derived by computing the CIR value from
the administrative CIR and PIR values and their corresponding
adaptation rules."
::= { tSapIngressQueueEntry 18 }
tSapIngressQueueLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressQueueTable."
::= { tSapIngressQueueEntry 19 }
tSapIngressQueuePoliced OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressQueuePoliced specifies that the out of profile
traffic feeding into the physical queue instance should be
dropped. tSapIngressQueuePoliced overrides the bandwidth
specified by the object tSapIngressQueueAdminCIR."
DEFVAL { false }
::= { tSapIngressQueueEntry 20 }
tSapIngressQueueMode OBJECT-TYPE
SYNTAX TQueueMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressQueueMode specifies the mode in which the queue
is operating. This attribute is associated with the queue
at the time of creation and cannot be modified thereafter."
DEFVAL { priority }
::= { tSapIngressQueueEntry 21 }
tSapIngressQueuePoolName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapIngressQueuePoolName specifies the name of
the pool to be applied for SAP ingress queue."
DEFVAL { ''H }
::= { tSapIngressQueueEntry 22 }
--
-- sap-ingress policy dscp table
--
tSapIngressDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of all DSCP entries for all sap-ingress policies."
::= { tSapIngressObjects 3 }
tSapIngressDSCPEntry OBJECT-TYPE
SYNTAX TSapIngressDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular DSCP entry for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
in the event that one policy has multiple entries, and
the tSapIngressDSCP values are the same, only one queue
will be created (the queue for the lexicographically
first tSapIngressDSCP).
"
INDEX { tSapIngressIndex, tSapIngressDSCP }
::= { tSapIngressDSCPTable 1 }
TSapIngressDSCPEntry ::= SEQUENCE
{
tSapIngressDSCP TDSCPName,
tSapIngressDSCPRowStatus RowStatus,
tSapIngressDSCPFC TNamedItemOrEmpty,
tSapIngressDSCPPriority TPriorityOrDefault,
tSapIngressDSCPLastChanged TimeStamp
}
tSapIngressDSCP OBJECT-TYPE
SYNTAX TDSCPName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { tSapIngressDSCPEntry 1 }
tSapIngressDSCPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows creation/deletion of rows in this table."
::= { tSapIngressDSCPEntry 2 }
tSapIngressDSCPFC OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressDSCPFC specifies the forwarding class or the sub
forwarding class to be used to classify all the traffic that
matches the specific DSCP i.e. tSapIngressDSCP.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
Unless tSapIngressDSCPFC is specified explicitly, this match
will be ignored for classification purposes."
DEFVAL { ''H }
::= { tSapIngressDSCPEntry 3 }
tSapIngressDSCPPriority OBJECT-TYPE
SYNTAX TPriorityOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
DEFVAL { default }
::= { tSapIngressDSCPEntry 4 }
tSapIngressDSCPLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressDSCPTable."
::= { tSapIngressDSCPEntry 5 }
--
-- sap-ingress policy dot1p table
--
tSapIngressDot1pTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressDot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a list of all dot1p entries for all sap-ingress policies."
::= { tSapIngressObjects 4 }
tSapIngressDot1pEntry OBJECT-TYPE
SYNTAX TSapIngressDot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular dot1p match for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
"
INDEX { tSapIngressIndex, tSapIngressDot1pValue }
::= { tSapIngressDot1pTable 1 }
TSapIngressDot1pEntry ::= SEQUENCE
{
tSapIngressDot1pValue Dot1PPriority,
tSapIngressDot1pRowStatus RowStatus,
tSapIngressDot1pFC TNamedItemOrEmpty,
tSapIngressDot1pPriority TPriorityOrDefault,
tSapIngressDot1pLastChanged TimeStamp
}
tSapIngressDot1pValue OBJECT-TYPE
SYNTAX Dot1PPriority (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"dot1p value to match in the packet. this value is
also used as an index so that for any dot1p value there
is only one possible disposition queue and priority.
"
::= { tSapIngressDot1pEntry 1 }
tSapIngressDot1pRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for this sap-ingress policy's dot1p entry."
::= { tSapIngressDot1pEntry 2 }
tSapIngressDot1pFC OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressDot1pFC specifies the forwarding class or the sub
forwarding class to be used to classify all the traffic that
matches the specific Dot1p i.e. tSapIngressDot1pValue.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
Unless tSapIngressDot1pFC is specified explicitly, this match
will be ignored for classification purposes."
DEFVAL { ''H }
::= { tSapIngressDot1pEntry 3 }
tSapIngressDot1pPriority OBJECT-TYPE
SYNTAX TPriorityOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"priority to use for packets that match the dot1p value
tSapIngressDot1pValue."
DEFVAL { default }
::= { tSapIngressDot1pEntry 4 }
tSapIngressDot1pLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressDot1pTable."
::= { tSapIngressDot1pEntry 5 }
--
-- sap-ingress policy ip criteria table
--
tSapIngressIPCriteriaTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressIPCriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"information about all sap-ingress policies' ip-criteria entries."
::= { tSapIngressObjects 5 }
tSapIngressIPCriteriaEntry OBJECT-TYPE
SYNTAX TSapIngressIPCriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular ip-criteria entry for a sap-ingress
policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
"
INDEX { tSapIngressIndex, tSapIngressIPCriteriaIndex }
::= { tSapIngressIPCriteriaTable 1 }
TSapIngressIPCriteriaEntry ::= SEQUENCE
{
tSapIngressIPCriteriaIndex TEntryId,
tSapIngressIPCriteriaRowStatus RowStatus,
tSapIngressIPCriteriaDescription TItemDescription,
tSapIngressIPCriteriaActionFC TNamedItemOrEmpty,
tSapIngressIPCriteriaActionPriority TPriorityOrDefault,
tSapIngressIPCriteriaSourceIpAddr IpAddress,
tSapIngressIPCriteriaSourceIpMask IpAddressPrefixLength,
tSapIngressIPCriteriaDestIpAddr IpAddress,
tSapIngressIPCriteriaDestIpMask IpAddressPrefixLength,
tSapIngressIPCriteriaProtocol TIpProtocol,
tSapIngressIPCriteriaSourcePortValue1 TTcpUdpPort,
tSapIngressIPCriteriaSourcePortValue2 TTcpUdpPort,
tSapIngressIPCriteriaSourcePortOperator TTcpUdpPortOperator,
tSapIngressIPCriteriaDestPortValue1 TTcpUdpPort,
tSapIngressIPCriteriaDestPortValue2 TTcpUdpPort,
tSapIngressIPCriteriaDestPortOperator TTcpUdpPortOperator,
tSapIngressIPCriteriaDSCP TDSCPNameOrEmpty,
tSapIngressIPCriteriaFragment TItemMatch,
tSapIngressIPCriteriaLastChanged TimeStamp
}
tSapIngressIPCriteriaIndex OBJECT-TYPE
SYNTAX TEntryId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"unique identifier separates this entry from others in this
policy."
::= { tSapIngressIPCriteriaEntry 1 }
tSapIngressIPCriteriaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for the IP Criteria entry."
::= { tSapIngressIPCriteriaEntry 2 }
tSapIngressIPCriteriaDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"description of this IP criteria entry."
DEFVAL { ''H }
::= { tSapIngressIPCriteriaEntry 3 }
tSapIngressIPCriteriaActionFC OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressIPCriteriaActionFC specifies the forwarding class
or the sub forwarding class to be used to classify all the
traffic that matches the specific IP criteria.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
Unless tSapIngressIPCriteriaActionFC is specified explicitly,
this match will be ignored for classification purposes."
DEFVAL { ''H }
::= { tSapIngressIPCriteriaEntry 4 }
tSapIngressIPCriteriaActionPriority OBJECT-TYPE
SYNTAX TPriorityOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"priority for packets which match this entry's criteria.
when set to default, the packet is sent to the queue
from DSCP/dot1p/FC which matched the packet, using the
priority from the DSCP/dot1p/FC which matched the packet."
DEFVAL { default }
::= { tSapIngressIPCriteriaEntry 5 }
tSapIngressIPCriteriaSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address to match with source-IP of the packet."
DEFVAL { '00000000'H }
::= { tSapIngressIPCriteriaEntry 6 }
tSapIngressIPCriteriaSourceIpMask OBJECT-TYPE
SYNTAX IpAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the prefix is the number of bits of the source IP address to match."
DEFVAL { 0 }
::= { tSapIngressIPCriteriaEntry 7 }
tSapIngressIPCriteriaDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address to match with destination-IP of the packet."
DEFVAL { '00000000'H }
::= { tSapIngressIPCriteriaEntry 8 }
tSapIngressIPCriteriaDestIpMask OBJECT-TYPE
SYNTAX IpAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the prefix is the number of bits of the destination IP address to
match."
DEFVAL { 0 }
::= { tSapIngressIPCriteriaEntry 9 }
tSapIngressIPCriteriaProtocol OBJECT-TYPE
SYNTAX TIpProtocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP protocol to match. use -1 to disable matching by IP protocol."
DEFVAL { -1 }
::= { tSapIngressIPCriteriaEntry 10 }
tSapIngressIPCriteriaSourcePortValue1 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP port value1. The value of this object is used according
to the description for tSapIngressIPCriteriaSourcePortOperator."
DEFVAL { 0 }
::= { tSapIngressIPCriteriaEntry 11 }
tSapIngressIPCriteriaSourcePortValue2 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP port value2. The value of this object is used according
to the description for tSapIngressIPCriteriaSourcePortOperator."
DEFVAL { 0 }
::= { tSapIngressIPCriteriaEntry 12 }
tSapIngressIPCriteriaSourcePortOperator OBJECT-TYPE
SYNTAX TTcpUdpPortOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operator specifies the manner in which
tSapIngressIPCriteriaSourcePortValue1 and
tSapIngressIPCriteriaSourcePortValue2 are to be used. The value
of these latter 2 objects and
tSapIngressIPCriteriaSourcePortOperator is used as described in
TTcpUdpPortOperator."
DEFVAL { none }
::= { tSapIngressIPCriteriaEntry 13 }
tSapIngressIPCriteriaDestPortValue1 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP port value1. The value of this object is used according
to the description for tSapIngressIPCriteriaDestPortOperator."
DEFVAL { 0 }
::= { tSapIngressIPCriteriaEntry 14 }
tSapIngressIPCriteriaDestPortValue2 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TCP/UDP port value2. The value of this object is used according
to the description for tSapIngressIPCriteriaDestPortOperator."
DEFVAL { 0 }
::= { tSapIngressIPCriteriaEntry 15 }
tSapIngressIPCriteriaDestPortOperator OBJECT-TYPE
SYNTAX TTcpUdpPortOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operator specifies the manner in which
tSapIngressIPCriteriaDestPortValue1 and
tSapIngressIPCriteriaDestPortValue2 are to be used. The value
of these latter 2 objects and
tSapIngressIPCriteriaDestPortOperator is used as described in
TTcpUdpPortOperator."
DEFVAL { none }
::= { tSapIngressIPCriteriaEntry 16 }
tSapIngressIPCriteriaDSCP OBJECT-TYPE
SYNTAX TDSCPNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DSCP value to match in the packet"
DEFVAL { ''H }
::= { tSapIngressIPCriteriaEntry 17 }
tSapIngressIPCriteriaFragment OBJECT-TYPE
SYNTAX TItemMatch
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"matches when the packet is a fragment (true)
or when the packet is not a fragment (false)
or matches all packets fragmented or not (off)."
DEFVAL { off }
::= { tSapIngressIPCriteriaEntry 19 }
tSapIngressIPCriteriaLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressIPCriteriaTable."
::= { tSapIngressIPCriteriaEntry 20 }
--
-- sap-ingress policy mac criteria table
--
tSapIngressMacCriteriaTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressMacCriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"information about all sap-ingress policies' mac-criteria entries."
::= { tSapIngressObjects 6 }
tSapIngressMacCriteriaEntry OBJECT-TYPE
SYNTAX TSapIngressMacCriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular mac-criteria entry
for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile."
INDEX { tSapIngressIndex, tSapIngressMacCriteriaIndex }
::= { tSapIngressMacCriteriaTable 1 }
TSapIngressMacCriteriaEntry ::= SEQUENCE
{
tSapIngressMacCriteriaIndex TEntryId,
tSapIngressMacCriteriaRowStatus RowStatus,
tSapIngressMacCriteriaDescription TItemDescription,
tSapIngressMacCriteriaActionFC TNamedItemOrEmpty,
tSapIngressMacCriteriaActionPriority TPriorityOrDefault,
tSapIngressMacCriteriaFrameType TFrameType,
tSapIngressMacCriteriaSrcMacAddr MacAddress,
tSapIngressMacCriteriaSrcMacMask MacAddress,
tSapIngressMacCriteriaDstMacAddr MacAddress,
tSapIngressMacCriteriaDstMacMask MacAddress,
tSapIngressMacCriteriaDot1PValue Dot1PPriority,
tSapIngressMacCriteriaDot1PMask Dot1PPriority,
tSapIngressMacCriteriaEthernetType Integer32,
tSapIngressMacCriteriaDSAP ServiceAccessPoint,
tSapIngressMacCriteriaDSAPMask ServiceAccessPoint,
tSapIngressMacCriteriaSSAP ServiceAccessPoint,
tSapIngressMacCriteriaSSAPMask ServiceAccessPoint,
tSapIngressMacCriteriaSnapPid Integer32,
tSapIngressMacCriteriaSnapOui INTEGER,
tSapIngressMacCriteriaLastChanged TimeStamp
}
tSapIngressMacCriteriaIndex OBJECT-TYPE
SYNTAX TEntryId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tSapIngressMacCriteriaEntry 1 }
tSapIngressMacCriteriaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { tSapIngressMacCriteriaEntry 2 }
tSapIngressMacCriteriaDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { ''H }
::= { tSapIngressMacCriteriaEntry 3 }
tSapIngressMacCriteriaActionFC OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressMacCriteriaActionFC specifies the forwarding class
or the sub forwarding class to be used to classify all the
traffic that matches the specific Mac criteria.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
Unless tSapIngressMacCriteriaActionFC is specified explicitly,
this match will be ignored for classification purposes."
::= { tSapIngressMacCriteriaEntry 4 }
tSapIngressMacCriteriaActionPriority OBJECT-TYPE
SYNTAX TPriorityOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { default }
::= { tSapIngressMacCriteriaEntry 5 }
tSapIngressMacCriteriaFrameType OBJECT-TYPE
SYNTAX TFrameType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of mac frame for which we are defining this match criteria."
DEFVAL { e802dot3 }
::= { tSapIngressMacCriteriaEntry 6 }
tSapIngressMacCriteriaSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { '000000000000'H }
::= { tSapIngressMacCriteriaEntry 8 }
tSapIngressMacCriteriaSrcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { '000000000000'H }
::= { tSapIngressMacCriteriaEntry 9 }
tSapIngressMacCriteriaDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { '000000000000'H }
::= { tSapIngressMacCriteriaEntry 10 }
tSapIngressMacCriteriaDstMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { '000000000000'H }
::= { tSapIngressMacCriteriaEntry 11 }
tSapIngressMacCriteriaDot1PValue OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 12 }
tSapIngressMacCriteriaDot1PMask OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { 0 }
::= { tSapIngressMacCriteriaEntry 13 }
tSapIngressMacCriteriaEthernetType OBJECT-TYPE
SYNTAX Integer32 (-1 | 1536..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry."
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 14 }
tSapIngressMacCriteriaDSAP OBJECT-TYPE
SYNTAX ServiceAccessPoint
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry."
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 15 }
tSapIngressMacCriteriaDSAPMask OBJECT-TYPE
SYNTAX ServiceAccessPoint
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry."
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 16 }
tSapIngressMacCriteriaSSAP OBJECT-TYPE
SYNTAX ServiceAccessPoint
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry."
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 17 }
tSapIngressMacCriteriaSSAPMask OBJECT-TYPE
SYNTAX ServiceAccessPoint
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry."
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 18 }
tSapIngressMacCriteriaSnapPid OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry."
DEFVAL { -1 }
::= { tSapIngressMacCriteriaEntry 19 }
tSapIngressMacCriteriaSnapOui OBJECT-TYPE
SYNTAX INTEGER { off(1), zero(2), nonZero(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "whether to match snap-oui, and what to match."
DEFVAL { off }
::= { tSapIngressMacCriteriaEntry 20 }
tSapIngressMacCriteriaLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressMacCriteriaTable."
::= { tSapIngressMacCriteriaEntry 21 }
--
-- sap-ingress policy fc table
--
tSapIngressFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the mapping of a particular
forwarding class traffic into the specified queue."
::= { tSapIngressObjects 7 }
tSapIngressFCEntry OBJECT-TYPE
SYNTAX TSapIngressFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular sap-ingress policy's
forwarding class mappings to queues.
Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile."
INDEX { tSapIngressIndex, tSapIngressFCName }
::= { tSapIngressFCTable 1 }
TSapIngressFCEntry ::= SEQUENCE
{
tSapIngressFCName TNamedItem,
tSapIngressFCRowStatus RowStatus,
tSapIngressFCQueue TIngressQueueId,
tSapIngressFCMCastQueue TIngressQueueId,
tSapIngressFCBCastQueue TIngressQueueId,
tSapIngressFCUnknownQueue TIngressQueueId,
tSapIngressFCLastChanged TimeStamp,
tSapIngressFCInProfRemark TRemarkType,
tSapIngressFCInProfDscp TNamedItemOrEmpty,
tSapIngressFCInProfPrec TPrecValueOrNone,
tSapIngressFCOutProfRemark TRemarkType,
tSapIngressFCOutProfDscp TNamedItemOrEmpty,
tSapIngressFCOutProfPrec TPrecValueOrNone,
tSapIngressFCProfile TProfileOrNone,
tSapIngressFCDE1OutOfProfile TruthValue
}
tSapIngressFCName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tSapIngressFCName specifies the forwarding class or the sub
forwarding class for which this mapping is defined.
A sub forwarding class mapping can also be configured. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
A sub forwarding class mapping should exist in this table if
any explicit match criteria in this SAP ingress QoS policy
try to use it. However, it is not the same for the base
forwarding classes."
::= { tSapIngressFCEntry 1 }
tSapIngressFCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for this queue."
::= { tSapIngressFCEntry 2 }
tSapIngressFCQueue OBJECT-TYPE
SYNTAX TIngressQueueId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific queue to be used for packets in this forwarding class.
A value of zero implies that the default queues should be used."
::= { tSapIngressFCEntry 3 }
tSapIngressFCMCastQueue OBJECT-TYPE
SYNTAX TIngressQueueId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific multicast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be
ignored wherever it is irrelevant.
A value of zero implies that the default queues should be used."
::= { tSapIngressFCEntry 4 }
tSapIngressFCBCastQueue OBJECT-TYPE
SYNTAX TIngressQueueId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific broadcast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be
ignored wherever it is irrelevant.
A value of zero implies that the default queues should be used."
::= { tSapIngressFCEntry 5 }
tSapIngressFCUnknownQueue OBJECT-TYPE
SYNTAX TIngressQueueId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific unknown destination queue to be used for packets in this
forwarding class. The queue is used only for specific entities and
will be ignored wherever it is irrelevant.
A value of zero implies that the default queues should be used."
::= { tSapIngressFCEntry 6 }
tSapIngressFCLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressFCLastChanged indicates the value of sysUpTime
when the forwarding class entry was last modified."
::= { tSapIngressFCEntry 7 }
tSapIngressFCInProfRemark OBJECT-TYPE
SYNTAX TRemarkType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCInProfRemark specifies the remarking type to
be used for the in profile packets feeding into the queues."
DEFVAL { none }
::= { tSapIngressFCEntry 8 }
tSapIngressFCInProfDscp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCInProfDscp specifies the DSCP to be used while
remarking the in profile packets when the in-profile
remarking type, tSapIngressFCInProfRemark is specified to be
'dscp'."
DEFVAL { ''H }
::= { tSapIngressFCEntry 9 }
tSapIngressFCInProfPrec OBJECT-TYPE
SYNTAX TPrecValueOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCInProfPrec specifies the precedence value to be used
while remarking the in profile packets when the in-profile
remarking type, tSapIngressFCInProfRemark is specified to be
'precedence'."
DEFVAL { -1 }
::= { tSapIngressFCEntry 10 }
tSapIngressFCOutProfRemark OBJECT-TYPE
SYNTAX TRemarkType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCOutProfRemark specifies the remarking type to
be used for the in profile packets feeding into the queues."
DEFVAL { none }
::= { tSapIngressFCEntry 11 }
tSapIngressFCOutProfDscp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCOutProfDscp specifies the DSCP to be used while
remarking the in profile packets when the in-profile
remarking type, tSapIngressFCOutProfRemark is specified to be
'dscp'."
DEFVAL { ''H }
::= { tSapIngressFCEntry 12 }
tSapIngressFCOutProfPrec OBJECT-TYPE
SYNTAX TPrecValueOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCOutProfPrec specifies the precedence value to be used
while remarking the in profile packets when the in-profile
remarking type, tSapIngressFCOutProfRemark is specified to be
'precedence'."
DEFVAL { -1 }
::= { tSapIngressFCEntry 13 }
tSapIngressFCProfile OBJECT-TYPE
SYNTAX TProfileOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressFCProfile specifies the profile of the packets
associated with this forwarding class.
This object can not be set to anything but 'none' if the
queues being used by this mapping do not have their modes,
tSapIngressQueueMode set to 'profile'."
DEFVAL { none }
::= { tSapIngressFCEntry 14 }
tSapIngressFCDE1OutOfProfile OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapIngressFCDE1OutOfProfile specifies whether frames
with DE value of '1' are to be treated as out-of-profile (as if
tSapIngressFCProfile was set to 'out').
When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value
of '1' are autmatically classified as out-of-profile.
Frames with DE value of '0' will continue to be policed based on the
value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of
ingress queue is within CIR, frames with DE=0 will be treated as
in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these
frames are treated as out-of-profile.
When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action
specified by the value of tSapIngressFCProfile."
DEFVAL { false }
::= { tSapIngressFCEntry 18 }
--
-- sap-ingress policy precedence table
--
tSapIngressPrecTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table maintains the mapping of a particular
precedence value into a forwarding class"
::= { tSapIngressObjects 8 }
tSapIngressPrecEntry OBJECT-TYPE
SYNTAX TSapIngressPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular sap-ingress policy's
IP precedence values to forwarding class mappings.
Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile."
INDEX { tSapIngressIndex, tSapIngressPrecValue }
::= { tSapIngressPrecTable 1 }
TSapIngressPrecEntry ::= SEQUENCE
{
tSapIngressPrecValue TPrecValue,
tSapIngressPrecRowStatus RowStatus,
tSapIngressPrecFC TNamedItemOrEmpty,
tSapIngressPrecFCPriority TPriorityOrDefault,
tSapIngressPrecLastChanged TimeStamp
}
tSapIngressPrecValue OBJECT-TYPE
SYNTAX TPrecValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Precedence value for which the mapping is done."
::= { tSapIngressPrecEntry 1 }
tSapIngressPrecRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for this mapping."
::= { tSapIngressPrecEntry 2 }
tSapIngressPrecFC OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapIngressPrecFC specifies the forwarding class or the sub
forwarding class to be used to classify all the traffic that
matches the specific precedence value i.e. tSapIngressPrecValue.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
Unless tSapIngressPrecFC is specified explicitly, this match
will be ignored for classification purposes."
DEFVAL { ''H }
::= { tSapIngressPrecEntry 3 }
tSapIngressPrecFCPriority OBJECT-TYPE
SYNTAX TPriorityOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority to be assigned to the matching traffic."
DEFVAL { default }
::= { tSapIngressPrecEntry 4 }
tSapIngressPrecLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapIngressPrecTable."
::= { tSapIngressPrecEntry 5 }
--
-- sap-ingress policy ipv6 criteria table
--
tSapIngressIPv6CriteriaTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapIngressIPv6CriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about all sap-ingress policies' ipv6-criteria entries."
::= { tSapIngressObjects 9 }
tSapIngressIPv6CriteriaEntry OBJECT-TYPE
SYNTAX TSapIngressIPv6CriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular ipv6-criteria entry for a sap-ingress
policy.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile."
INDEX { tSapIngressIndex, tSapIngressIPv6CriteriaIndex }
::= { tSapIngressIPv6CriteriaTable 1 }
TSapIngressIPv6CriteriaEntry ::= SEQUENCE
{
tSapIngressIPv6CriteriaIndex TEntryId,
tSapIngressIPv6CriteriaRowStatus RowStatus,
tSapIngressIPv6CriteriaDescription TItemDescription,
tSapIngressIPv6CriteriaActionFC TNamedItemOrEmpty,
tSapIngressIPv6CriteriaActionPriority TPriorityOrDefault,
tSapIngressIPv6CriteriaSourceIpAddr InetAddressIPv6,
tSapIngressIPv6CriteriaSourceIpMask InetAddressPrefixLength,
tSapIngressIPv6CriteriaDestIpAddr InetAddressIPv6,
tSapIngressIPv6CriteriaDestIpMask InetAddressPrefixLength,
tSapIngressIPv6CriteriaNextHeader TIpProtocol,
tSapIngressIPv6CriteriaSourcePortValue1 TTcpUdpPort,
tSapIngressIPv6CriteriaSourcePortValue2 TTcpUdpPort,
tSapIngressIPv6CriteriaSourcePortOperator TTcpUdpPortOperator,
tSapIngressIPv6CriteriaDestPortValue1 TTcpUdpPort,
tSapIngressIPv6CriteriaDestPortValue2 TTcpUdpPort,
tSapIngressIPv6CriteriaDestPortOperator TTcpUdpPortOperator,
tSapIngressIPv6CriteriaDSCP TDSCPNameOrEmpty,
tSapIngressIPv6CriteriaLastChanged TimeStamp
}
tSapIngressIPv6CriteriaIndex OBJECT-TYPE
SYNTAX TEntryId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaIndex specifies
uniquely each entry in the policy."
::= { tSapIngressIPv6CriteriaEntry 1 }
tSapIngressIPv6CriteriaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaRowStatus specifies the
Row Status for the IPv6 Criteria entry."
::= { tSapIngressIPv6CriteriaEntry 2 }
tSapIngressIPv6CriteriaDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDescription specifies
an optional user provided description of this IPv6 criteria entry."
DEFVAL { ''H }
::= { tSapIngressIPv6CriteriaEntry 3 }
tSapIngressIPv6CriteriaActionFC OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaActionFC specifies the
forwarding class or the sub forwarding class to be used to classify
all the traffic that matches the specific IPv6 criteria.
Specification of a sub forwarding class is also allowed. The
format of a sub forwarding class is the concatenation of the
base forwarding class and a sub class identifier in the form
base-fc-name[.sub-fc-name]
To reference a sub forwarding class, the mapping of the sub
forwarding class should be existing in this QoS policy.
Unless tSapIngressIPv6CriteriaActionFC is specified explicitly,
this match will be ignored for classification purposes."
DEFVAL { ''H }
::= { tSapIngressIPv6CriteriaEntry 4 }
tSapIngressIPv6CriteriaActionPriority OBJECT-TYPE
SYNTAX TPriorityOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaActionPriority specifies
the priority for packets which match this entry's criteria.
When set to 'default', the packet is sent to the queue
from DSCP/dot1p/FC which matched the packet, using the
priority from the DSCP/dot1p/FC which matched the packet."
DEFVAL { default }
::= { tSapIngressIPv6CriteriaEntry 5 }
tSapIngressIPv6CriteriaSourceIpAddr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies
the IPv6 address to match with source-IPv6 of the packet."
DEFVAL { '00000000000000000000000000000000'H }
::= { tSapIngressIPv6CriteriaEntry 6 }
tSapIngressIPv6CriteriaSourceIpMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies
the prefix is the number of bits of the source IPv6 address to match."
DEFVAL { 0 }
::= { tSapIngressIPv6CriteriaEntry 7 }
tSapIngressIPv6CriteriaDestIpAddr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies
the IPv6 address to match with destination-IPv6 of the packet."
DEFVAL { '00000000000000000000000000000000'H }
::= { tSapIngressIPv6CriteriaEntry 8 }
tSapIngressIPv6CriteriaDestIpMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDestIpMask specifies
the prefix is the number of bits of the destination IPv6 address to
match."
DEFVAL { 0 }
::= { tSapIngressIPv6CriteriaEntry 9 }
tSapIngressIPv6CriteriaNextHeader OBJECT-TYPE
SYNTAX TIpProtocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaNextHeader specifies
the Next Header to match. use -1 to disable matching by Next Header.
Because the match criteria only pertains to the last next-header, the
following values are not accepted: 0, 43, 44, 50, 51, and 60."
DEFVAL { -1 }
::= { tSapIngressIPv6CriteriaEntry 10 }
tSapIngressIPv6CriteriaSourcePortValue1 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaSourcePortValue1
specifies the TCP/UDP port value1. The value of this object is used
according to the description for
tSapIngressIPv6CriteriaSourcePortOperator."
DEFVAL { 0 }
::= { tSapIngressIPv6CriteriaEntry 11 }
tSapIngressIPv6CriteriaSourcePortValue2 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaSourcePortValue2
specifies TCP/UDP port value2. The value of this object is used
according to the description for
tSapIngressIPv6CriteriaSourcePortOperator."
DEFVAL { 0 }
::= { tSapIngressIPv6CriteriaEntry 12 }
tSapIngressIPv6CriteriaSourcePortOperator OBJECT-TYPE
SYNTAX TTcpUdpPortOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaSourcePortOperator
specifies The operator specifies the manner in which
tSapIngressIPv6CriteriaSourcePortValue1 and
tSapIngressIPv6CriteriaSourcePortValue2 are to be used."
DEFVAL { none }
::= { tSapIngressIPv6CriteriaEntry 13 }
tSapIngressIPv6CriteriaDestPortValue1 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDestPortValue1
specifies the TCP/UDP port value1. The value of this object is used
according to the description for
tSapIngressIPv6CriteriaDestPortOperator."
DEFVAL { 0 }
::= { tSapIngressIPv6CriteriaEntry 14 }
tSapIngressIPv6CriteriaDestPortValue2 OBJECT-TYPE
SYNTAX TTcpUdpPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDestPortValue2
specifies the TCP/UDP port value2. The value of this object is used
according to the description for
tSapIngressIPv6CriteriaDestPortOperator."
DEFVAL { 0 }
::= { tSapIngressIPv6CriteriaEntry 15 }
tSapIngressIPv6CriteriaDestPortOperator OBJECT-TYPE
SYNTAX TTcpUdpPortOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDestPortOperator
specifies the manner in which
tSapIngressIPv6CriteriaDestPortValue1 and
tSapIngressIPv6CriteriaDestPortValue2 are to be used."
DEFVAL { none }
::= { tSapIngressIPv6CriteriaEntry 16 }
tSapIngressIPv6CriteriaDSCP OBJECT-TYPE
SYNTAX TDSCPNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaDSCP specifies the
DSCP value to match in the packet"
DEFVAL { ''H }
::= { tSapIngressIPv6CriteriaEntry 17 }
tSapIngressIPv6CriteriaLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object indicates timestamp of last change to this
row in tSapIngressIPv6CriteriaTable."
::= { tSapIngressIPv6CriteriaEntry 20 }
--
-- sap-egress policy table
--
tSapEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"information about all sap-egress policies."
::= { tSapEgressObjects 1 }
tSapEgressEntry OBJECT-TYPE
SYNTAX TSapEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular sap-egress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
the default sap-egress policy (1) cannot be changed or
destroyed.
"
INDEX { tSapEgressIndex }
::= { tSapEgressTable 1 }
TSapEgressEntry ::= SEQUENCE
{
tSapEgressIndex TSapEgressPolicyID,
tSapEgressRowStatus RowStatus,
tSapEgressScope TItemScope,
tSapEgressDescription TItemDescription,
tSapEgressLastChanged TimeStamp
}
tSapEgressIndex OBJECT-TYPE
SYNTAX TSapEgressPolicyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the sap-egress policy ID is used as index for the table."
::= { tSapEgressEntry 1 }
tSapEgressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of this policy's entry."
::= { tSapEgressEntry 2 }
tSapEgressScope OBJECT-TYPE
SYNTAX TItemScope
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"scope of the sap-egress policy."
DEFVAL { template }
::= { tSapEgressEntry 3 }
tSapEgressDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"user-supplied description of this sap-egress policy."
DEFVAL { ''H }
::= { tSapEgressEntry 4 }
tSapEgressLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapEgressTable."
::= { tSapEgressEntry 5 }
--
-- sap-egress policy queue table
--
tSapEgressQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapEgressQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "information about all sap-egress policies' queues."
::= { tSapEgressObjects 2 }
tSapEgressQueueEntry OBJECT-TYPE
SYNTAX TSapEgressQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular sap-egress queue.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile."
INDEX { tSapEgressIndex, tSapEgressQueueIndex }
::= { tSapEgressQueueTable 1 }
TSapEgressQueueEntry ::= SEQUENCE
{
tSapEgressQueueIndex TEgressQueueId,
tSapEgressQueueRowStatus RowStatus,
tSapEgressQueueParent TNamedItemOrEmpty,
tSapEgressQueueLevel TLevel,
tSapEgressQueueWeight TWeight,
tSapEgressQueueCIRLevel TLevelOrDefault,
tSapEgressQueueCIRWeight TWeight,
tSapEgressQueueExpedite INTEGER,
tSapEgressQueueCBS TBurstSize,
tSapEgressQueueMBS TBurstSize,
tSapEgressQueueHiPrioOnly TBurstPercentOrDefault,
tSapEgressQueuePIRAdaptation TAdaptationRule,
tSapEgressQueueCIRAdaptation TAdaptationRule,
tSapEgressQueueAdminPIR TPIRRate,
tSapEgressQueueAdminCIR TCIRRate,
tSapEgressQueueOperPIR TPIRRate,
tSapEgressQueueOperCIR TCIRRate,
tSapEgressQueueLastChanged TimeStamp,
tSapEgressQueueUsePortParent TruthValue,
tSapEgressQueuePortLvl TLevel,
tSapEgressQueuePortWght TWeight,
tSapEgressQueuePortCIRLvl TLevelOrDefault,
tSapEgressQueuePortCIRWght TWeight,
tSapEgressQueuePortAvgOverhead Unsigned32,
tSapEgressQueuePoolName TNamedItemOrEmpty
}
tSapEgressQueueIndex OBJECT-TYPE
SYNTAX TEgressQueueId (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the number of a queue. zero is not allowed.
for sap-egress, only three queues are allowed,
so the queue index range is restricted."
::= { tSapEgressQueueEntry 1 }
tSapEgressQueueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry."
::= { tSapEgressQueueEntry 2 }
tSapEgressQueueParent OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The scheduler to which this queue would be feeding to."
DEFVAL { ''H }
::= { tSapEgressQueueEntry 3 }
tSapEgressQueueLevel OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent."
DEFVAL { 1 }
::= { tSapEgressQueueEntry 4 }
tSapEgressQueueWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used by the scheduler to which this queue
would be feeding to."
DEFVAL { 1 }
::= { tSapEgressQueueEntry 5 }
tSapEgressQueueCIRLevel OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for
the above CIR traffic."
DEFVAL { 0 }
::= { tSapEgressQueueEntry 6 }
tSapEgressQueueCIRWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to."
DEFVAL { 1 }
::= { tSapEgressQueueEntry 7 }
tSapEgressQueueExpedite OBJECT-TYPE
SYNTAX INTEGER {
expedited (1),
auto-expedited(2),
non-expedited (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSapEgressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this attribute should be
dynamically updated by looking at the forwarding classes mapping
into this queue. In such a case the queue is treated as
'non-expedited' if there is even a single non-expedited forwarding
class using this queue.
This attribute is associated with the queue at the time of creation
and cannot be modified thereafter."
DEFVAL { auto-expedited }
::= { tSapEgressQueueEntry 8 }
tSapEgressQueueCBS OBJECT-TYPE
SYNTAX TBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of reserved buffer space (in kilo bytes) for the queue."
DEFVAL { -1 }
::= { tSapEgressQueueEntry 9 }
tSapEgressQueueMBS OBJECT-TYPE
SYNTAX TBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum amount of buffer space (in kilo bytes) allowed for the
queue."
DEFVAL { -1 }
::= { tSapEgressQueueEntry 10 }
tSapEgressQueueHiPrioOnly OBJECT-TYPE
SYNTAX TBurstPercentOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of buffer space for the queue, used
exclusively by high priority packets."
DEFVAL { -1 }
::= { tSapEgressQueueEntry 11 }
tSapEgressQueuePIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset."
DEFVAL { closest }
::= { tSapEgressQueueEntry 12 }
tSapEgressQueueCIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset."
DEFVAL { closest }
::= { tSapEgressQueueEntry 13 }
tSapEgressQueueAdminPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative PIR specified by the user."
DEFVAL { -1 }
::= { tSapEgressQueueEntry 14 }
tSapEgressQueueAdminCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative CIR specified by the user."
DEFVAL { 0 }
::= { tSapEgressQueueEntry 15 }
tSapEgressQueueOperPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kbps"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The administrative PIR specified by the user."
::= { tSapEgressQueueEntry 16 }
tSapEgressQueueOperCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kbps"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The operational value derived by computing the CIR value from
the administrative CIR and PIR values and their corresponding
adaptation rules."
::= { tSapEgressQueueEntry 17 }
tSapEgressQueueLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapEgressQueueTable."
::= { tSapEgressQueueEntry 18 }
tSapEgressQueueUsePortParent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapEgressQueueUsePortParent specifies
whether this queue is parented by a port-level scheduler. When
the value is 'true', this SAP egress queue is parented by a
port-level scheduler. This object is mutually exclusive with
tSapEgressQueueParent. Only one kind of parent is allowed."
DEFVAL { false }
::= { tSapEgressQueueEntry 19 }
tSapEgressQueuePortLvl OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapEgressQueuePortLvl specifies the
port priority this queue will use to receive bandwidth from
the port-level scheduler for its above-cir offered load."
DEFVAL { 1 }
::= { tSapEgressQueueEntry 20 }
tSapEgressQueuePortWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapEgressQueuePortWght specifies the
weight this queue will use to receive bandwidth from the
port-level scheduler for its above-cir offered load."
DEFVAL { 1 }
::= { tSapEgressQueueEntry 21 }
tSapEgressQueuePortCIRLvl OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapEgressQueuePortCIRLvl specifies the
port priority this queue will use to receive bandwidth from
the port-level scheduler for its within-cir offered load."
DEFVAL { 0 }
::= { tSapEgressQueueEntry 22 }
tSapEgressQueuePortCIRWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tSapEgressQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the
port-level scheduler for its within-cir offered load."
DEFVAL { 0 }
::= { tSapEgressQueueEntry 23 }
tSapEgressQueuePortAvgOverhead OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "Hundredths of a percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressQueuePortAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent, used to
translate packet-based rate to frame-based rate and vice versa."
DEFVAL { 0 }
::= { tSapEgressQueueEntry 24 }
tSapEgressQueuePoolName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressQueuePoolName specifies the name of
the pool to be applied for SAP egress queue."
DEFVAL { ''H }
::= { tSapEgressQueueEntry 25 }
--
-- sap-egress policy fc table
--
tSapEgressFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSapEgressFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tSapEgressObjects 3 }
tSapEgressFCEntry OBJECT-TYPE
SYNTAX TSapEgressFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular sap-egress policy's
forwarding class mappings to queues and dot1p values.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
"
INDEX { tSapEgressIndex, tSapEgressFCName }
::= { tSapEgressFCTable 1 }
TSapEgressFCEntry ::= SEQUENCE
{
tSapEgressFCName TFCName,
tSapEgressFCRowStatus RowStatus,
tSapEgressFCQueue TEgressQueueId,
tSapEgressFCDot1PValue Dot1PPriority,
tSapEgressFCLastChanged TimeStamp,
tSapEgressFCDot1PInProfile Dot1PPriority,
tSapEgressFCDot1POutProfile Dot1PPriority,
tSapEgressFCForceDEValue TDEValue,
tSapEgressFCDEMark TruthValue,
tSapEgressFCInProfDscp TNamedItemOrEmpty,
tSapEgressFCOutProfDscp TNamedItemOrEmpty,
tSapEgressFCInProfPrec TPrecValueOrNone,
tSapEgressFCOutProfPrec TPrecValueOrNone
}
tSapEgressFCName OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"forwarding class name."
::= { tSapEgressFCEntry 1 }
tSapEgressFCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for this queue."
::= { tSapEgressFCEntry 2 }
tSapEgressFCQueue OBJECT-TYPE
SYNTAX TEgressQueueId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The queue to use for packets in this forwarding class.
No FC can map to the same queue being used by 'premium' class.
You must specify a valid queue-id before setting the row status
to active."
::= { tSapEgressFCEntry 3 }
tSapEgressFCDot1PValue OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of tSapEgressFCDot1PValue specifies 802.1p value to use for
packets in this forwarding class.
This object has been replaced by tSapEgressFCDot1PInProfile and
tSapEgressFCDot1POutProfile objects."
DEFVAL { -1 }
::= { tSapEgressFCEntry 4 }
tSapEgressFCLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSapEgressFCTable."
::= { tSapEgressFCEntry 5 }
tSapEgressFCDot1PInProfile OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set
for in-profile frames in this forwarding class.
An inconsistentValue error is returned if this object is set to any value
other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'."
DEFVAL { -1 }
::= { tSapEgressFCEntry 8 }
tSapEgressFCDot1POutProfile OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set
for out-profile frames in this forwarding class.
An inconsistentValue error is returned if this object is set to any value
other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'."
DEFVAL { -1 }
::= { tSapEgressFCEntry 9 }
tSapEgressFCForceDEValue OBJECT-TYPE
SYNTAX TDEValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCForceDEValue specifies the DE value to set
for all the frames of this forwarding class regardless of frame's profile
status.
An inconsistentValue error is returned if this object is set to any value
other than '-1', when tSapEgressFCDEMark object is set to 'false'."
DEFVAL { -1 }
::= { tSapEgressFCEntry 10 }
tSapEgressFCDEMark OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCDEMark specifies whether to set DE value in the
frames of this forwarding class.
An inconsistentValue error is returned if this object is set to 'false'
when tSapEgressFCForceDEValue object is not set to '-1'."
DEFVAL { false }
::= { tSapEgressFCEntry 11 }
tSapEgressFCInProfDscp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCInProfDscp specifies the DSCP name to set
for in-profile frames in this forwarding class.
The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp
must be set to either the default or non-default values for both.
An inconsistentValue error is returned if one object is set to the
default and other is set to a non-default value.
The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are
reset to default values when tSapEgressFCInProfDscp is set to any value
other than default.
An inconsistentValue error is returned if this object is set to any value
other than its default value when setting tSapEgressFCInProfPrec object
or tSapEgressFCOutProfPrec to a value other than their default values."
DEFVAL { ''H }
::= { tSapEgressFCEntry 12 }
tSapEgressFCOutProfDscp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCOutProfDscp specifies the DSCP name to set
for out-profile frames in this forwarding class.
The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp
must be set to either the default or non-default values for both.
An inconsistentValue error is returned if one object is set to the
default and other is set to a non-default value.
The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are
reset to default values when tSapEgressFCOutProfDscp is set to any value
other than default.
An inconsistentValue error is returned if this object is set to any value
other than its default value when setting tSapEgressFCInProfPrec object
or tSapEgressFCOutProfPrec to a value other than their default values."
DEFVAL { ''H }
::= { tSapEgressFCEntry 13 }
tSapEgressFCInProfPrec OBJECT-TYPE
SYNTAX TPrecValueOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCInProfPrec specifies the precedence value to
set for in-profile frames in this forwarding class.
The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec
must be set to either the default or non-default values for both.
An inconsistentValue error is returned if one object is set to the
default and other is set to a non-default value.
The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are
reset to default values when tSapEgressFCOutProfPrec is set to any value
other than default.
An inconsistentValue error is returned if this object is set to any value
other than its default value when setting tSapEgressFCInProfDscp object
or tSapEgressFCOutProfDscp to a value other than their default values."
DEFVAL { -1 }
::= { tSapEgressFCEntry 14 }
tSapEgressFCOutProfPrec OBJECT-TYPE
SYNTAX TPrecValueOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSapEgressFCOutProfPrec specifies the precedence value to
set for out-profile frames in this forwarding class.
The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be
be set to either the default or non-default values for both.
An inconsistentValue error is returned if one object is set to the
default and other is set to a non-default value.
The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are
reset to default values when tSapEgressFCOutProfPrec is set to any value
other than default.
An inconsistentValue error is returned if this object is set to any value
other than its default value when setting tSapEgressFCInProfDscp object
or tSapEgressFCOutProfDscp to a value other than their default values."
DEFVAL { -1 }
::= { tSapEgressFCEntry 15 }
--
-- network policy table
--
tNetworkPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tNetworkObjects 1 }
tNetworkPolicyEntry OBJECT-TYPE
SYNTAX TNetworkPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Network Policy.
network policy (1) is the default entry.
Default Entry is created by the agent, other entries are
created by user.
Default Entry cannot be modified/deleted. The other
entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
The default Egress FC entries are created as an action
of setting the rowstatus."
INDEX { tNetworkPolicyIndex }
::= { tNetworkPolicyTable 1 }
TNetworkPolicyEntry ::= SEQUENCE
{
tNetworkPolicyIndex TNetworkPolicyID,
tNetworkPolicyRowStatus RowStatus,
tNetworkPolicyScope TItemScope,
tNetworkPolicyDescription TItemDescription,
tNetworkPolicyIngressDefaultActionFC TFCName,
tNetworkPolicyIngressDefaultActionProfile TProfile,
tNetworkPolicyEgressRemark TruthValue,
tNetworkPolicyLastChanged TimeStamp,
tNetworkPolicyIngressLerUseDscp TruthValue
}
tNetworkPolicyIndex OBJECT-TYPE
SYNTAX TNetworkPolicyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
REFERENCE ""
::= { tNetworkPolicyEntry 1 }
tNetworkPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { tNetworkPolicyEntry 2 }
tNetworkPolicyScope OBJECT-TYPE
SYNTAX TItemScope
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { template }
::= { tNetworkPolicyEntry 5 }
tNetworkPolicyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tNetworkPolicyDescription holds the description for this policy."
DEFVAL { ''H }
::= { tNetworkPolicyEntry 6 }
tNetworkPolicyIngressDefaultActionFC OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tNetworkPolicyIngressDefaultActionFC specifies the default
forwarding class to be used while classifying the ingress traffic."
DEFVAL { 'be'H }
::= { tNetworkPolicyEntry 7 }
tNetworkPolicyIngressDefaultActionProfile OBJECT-TYPE
SYNTAX TProfile
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tNetworkPolicyIngressDefaultActionProfile specifies the
default profile to be used for the ingressing traffic."
DEFVAL { out }
::= { tNetworkPolicyEntry 8 }
tNetworkPolicyEgressRemark OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object tNetworkPolicyEgressRemark specifies if the system
will remark the egress packets or not."
DEFVAL { false }
::= { tNetworkPolicyEntry 9 }
tNetworkPolicyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of last change to this row in tNetworkPolicyTable."
::= { tNetworkPolicyEntry 10 }
tNetworkPolicyIngressLerUseDscp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object has significance only for the label edge routers
which should honor the DSCP markings instead of the LSPEXP bits."
DEFVAL { false }
::= { tNetworkPolicyEntry 11 }
--
-- network ingress policy dscp table
--
tNetworkIngressDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkIngressDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tNetworkObjects 2 }
tNetworkIngressDSCPEntry OBJECT-TYPE
SYNTAX TNetworkIngressDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a dscp map for a network policy.
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
"
INDEX { tNetworkPolicyIndex, tNetworkIngressDSCP }
::= { tNetworkIngressDSCPTable 1 }
TNetworkIngressDSCPEntry ::= SEQUENCE
{
tNetworkIngressDSCP TDSCPName,
tNetworkIngressDSCPRowStatus RowStatus,
tNetworkIngressDSCPFC TFCNameOrEmpty,
tNetworkIngressDSCPProfile TProfile,
tNetworkIngressDSCPLastChanged TimeStamp
}
tNetworkIngressDSCP OBJECT-TYPE
SYNTAX TDSCPName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tNetworkIngressDSCPEntry 1 }
tNetworkIngressDSCPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { tNetworkIngressDSCPEntry 2 }
tNetworkIngressDSCPFC OBJECT-TYPE
SYNTAX TFCNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { ''H }
::= { tNetworkIngressDSCPEntry 3 }
tNetworkIngressDSCPProfile OBJECT-TYPE
SYNTAX TProfile
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"there is no DEFVAL for this object. it must be deliberately
set before activating the row."
::= { tNetworkIngressDSCPEntry 4 }
tNetworkIngressDSCPLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tNetworkIngressDSCPTable."
::= { tNetworkIngressDSCPEntry 5 }
--
-- network ingress policy dot1p table
--
tNetworkIngressDot1pTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkIngressDot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tNetworkObjects 3 }
tNetworkIngressDot1pEntry OBJECT-TYPE
SYNTAX TNetworkIngressDot1pEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a dot1p map for a network policy.
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
"
INDEX { tNetworkPolicyIndex, tNetworkIngressDot1pValue }
::= { tNetworkIngressDot1pTable 1 }
TNetworkIngressDot1pEntry ::= SEQUENCE
{
tNetworkIngressDot1pValue Dot1PPriority,
tNetworkIngressDot1pRowStatus RowStatus,
tNetworkIngressDot1pFC TFCNameOrEmpty,
tNetworkIngressDot1pProfile TDEProfile,
tNetworkIngressDot1pLastChanged TimeStamp
}
tNetworkIngressDot1pValue OBJECT-TYPE
SYNTAX Dot1PPriority (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tNetworkIngressDot1pEntry 1 }
tNetworkIngressDot1pRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { tNetworkIngressDot1pEntry 2 }
tNetworkIngressDot1pFC OBJECT-TYPE
SYNTAX TFCNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { ''H }
::= { tNetworkIngressDot1pEntry 3 }
tNetworkIngressDot1pProfile OBJECT-TYPE
SYNTAX TDEProfile
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"there is no DEFVAL for this object. It must be deliberately
set before activating the row."
::= { tNetworkIngressDot1pEntry 4 }
tNetworkIngressDot1pLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tNetworkIngressDot1pTable."
::= { tNetworkIngressDot1pEntry 5 }
--
-- network ingress policy lspexp table
--
tNetworkIngressLSPEXPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkIngressLSPEXPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tNetworkObjects 4 }
tNetworkIngressLSPEXPEntry OBJECT-TYPE
SYNTAX TNetworkIngressLSPEXPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about LSP EXP mapping for a network policy.
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile."
INDEX { tNetworkPolicyIndex, tNetworkIngressLSPEXP }
::= { tNetworkIngressLSPEXPTable 1 }
TNetworkIngressLSPEXPEntry ::= SEQUENCE
{
tNetworkIngressLSPEXP TLspExpValue,
tNetworkIngressLSPEXPRowStatus RowStatus,
tNetworkIngressLSPEXPFC TFCNameOrEmpty,
tNetworkIngressLSPEXPProfile TProfile,
tNetworkIngressLSPEXPLastChanged TimeStamp
}
tNetworkIngressLSPEXP OBJECT-TYPE
SYNTAX TLspExpValue (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tNetworkIngressLSPEXPEntry 1 }
tNetworkIngressLSPEXPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { tNetworkIngressLSPEXPEntry 2 }
tNetworkIngressLSPEXPFC OBJECT-TYPE
SYNTAX TFCNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { ''H }
::= { tNetworkIngressLSPEXPEntry 3 }
tNetworkIngressLSPEXPProfile OBJECT-TYPE
SYNTAX TProfile
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"there is no DEFVAL for this object. it must be deliberately
set before activating the row."
::= { tNetworkIngressLSPEXPEntry 4 }
tNetworkIngressLSPEXPLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tNetworkIngressLSPEXPTable."
::= { tNetworkIngressLSPEXPEntry 5 }
--
-- network egress fc table
--
tNetworkEgressFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkEgressFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about all network policies' egress FC traffic disposition."
::= { tNetworkObjects 7 }
tNetworkEgressFCEntry OBJECT-TYPE
SYNTAX TNetworkEgressFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular network policy's egress
per-forwarding-class traffic disposition.
Entries are created/deleted as an action of creating/deleting
a row in the tNetworkPolicyTable.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile."
INDEX { tNetworkPolicyIndex, tNetworkEgressFCName }
::= { tNetworkEgressFCTable 1 }
TNetworkEgressFCEntry ::= SEQUENCE
{
tNetworkEgressFCName TFCName,
tNetworkEgressFCDSCPInProfile TDSCPNameOrEmpty,
tNetworkEgressFCDSCPOutProfile TDSCPNameOrEmpty,
tNetworkEgressFCLspExpInProfile TLspExpValue,
tNetworkEgressFCLspExpOutProfile TLspExpValue,
tNetworkEgressFCDot1pInProfile Dot1PPriority,
tNetworkEgressFCDot1pOutProfile Dot1PPriority,
tNetworkEgressFCLastChanged TimeStamp,
tNetworkEgressFCForceDEValue TDEValue,
tNetworkEgressFCDEMark TruthValue
}
tNetworkEgressFCName OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the name of the forwarding class (FC)."
::= { tNetworkEgressFCEntry 1 }
tNetworkEgressFCDSCPInProfile OBJECT-TYPE
SYNTAX TDSCPNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the DSCP to use for in-profile traffic."
::= { tNetworkEgressFCEntry 2 }
tNetworkEgressFCDSCPOutProfile OBJECT-TYPE
SYNTAX TDSCPNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the DSCP to use for out-of-profile traffic."
::= { tNetworkEgressFCEntry 3 }
tNetworkEgressFCLspExpInProfile OBJECT-TYPE
SYNTAX TLspExpValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the lsp-exp value to use for in-profile traffic."
::= { tNetworkEgressFCEntry 4 }
tNetworkEgressFCLspExpOutProfile OBJECT-TYPE
SYNTAX TLspExpValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the lsp-exp value to use for out-of-profile traffic."
::= { tNetworkEgressFCEntry 5 }
tNetworkEgressFCDot1pInProfile OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the Dot1p to use for in-profile traffic."
::= { tNetworkEgressFCEntry 6 }
tNetworkEgressFCDot1pOutProfile OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the Dot1p to use for out-of-profile traffic."
::= { tNetworkEgressFCEntry 7 }
tNetworkEgressFCLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tNetworkEgressFCTable."
::= { tNetworkEgressFCEntry 8 }
tNetworkEgressFCForceDEValue OBJECT-TYPE
SYNTAX TDEValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tNetworkEgressFCForceDEValue specifies the DE value to set
for network egress packets in this forwarding class regardless of
profile status of the frames.
An inconsistentValue error is returned if this object is set to any value
other than '-1', when tNetworkEgressFCDEMark object is set to
'false'."
DEFVAL { -1 }
::= { tNetworkEgressFCEntry 9 }
tNetworkEgressFCDEMark OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tNetworkEgressFCDEMark specifies whether to set DE value
in the frames of this forwarding class.
An inconsistentValue error is returned if this object is set to 'false'
when tNetworkEgressFCForceDEValue object is not set to '-1'."
DEFVAL { false }
::= { tNetworkEgressFCEntry 10 }
--
-- network-queue policy table
--
tNetworkQueuePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkQueuePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { tNetworkQueueObjects 1 }
tNetworkQueuePolicyEntry OBJECT-TYPE
SYNTAX TNetworkQueuePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { tNetworkQueuePolicy }
::= { tNetworkQueuePolicyTable 1 }
TNetworkQueuePolicyEntry ::= SEQUENCE
{
tNetworkQueuePolicy TNamedItem,
tNetworkQueuePolicyRowStatus RowStatus,
tNetworkQueuePolicyDescription TItemDescription,
tNetworkQueuePolicyLastChanged TimeStamp
}
tNetworkQueuePolicy OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tNetworkQueuePolicyEntry 1 }
tNetworkQueuePolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { tNetworkQueuePolicyEntry 2 }
tNetworkQueuePolicyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
DEFVAL { ''H }
::= { tNetworkQueuePolicyEntry 3 }
tNetworkQueuePolicyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { tNetworkQueuePolicyEntry 8 }
--
-- network-queue policy queue table
--
tNetworkQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tNetworkQueueObjects 2 }
tNetworkQueueEntry OBJECT-TYPE
SYNTAX TNetworkQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { tNetworkQueuePolicy, tNetworkQueue }
::= { tNetworkQueueTable 1 }
TNetworkQueueEntry ::= SEQUENCE
{
tNetworkQueue TQueueId,
tNetworkQueueRowStatus RowStatus,
tNetworkQueuePoolName TNamedItemOrEmpty,
tNetworkQueueParent TNamedItemOrEmpty,
tNetworkQueueLevel TLevel,
tNetworkQueueWeight TWeight,
tNetworkQueueCIRLevel TLevelOrDefault,
tNetworkQueueCIRWeight TWeight,
tNetworkQueueMCast TruthValue,
tNetworkQueueExpedite INTEGER,
tNetworkQueueCIR TRatePercent,
tNetworkQueuePIR TPIRRatePercent,
tNetworkQueueCBS TBurstHundredthsOfPercent,
tNetworkQueueMBS TBurstHundredthsOfPercent,
tNetworkQueueHiPrioOnly TBurstPercentOrDefault,
tNetworkQueueLastChanged TimeStamp,
tNetworkQueueUsePortParent TruthValue,
tNetworkQueuePortLvl TLevel,
tNetworkQueuePortWght TWeight,
tNetworkQueuePortCIRLvl TLevelOrDefault,
tNetworkQueuePortCIRWght TWeight,
tNetworkQueuePortAvgOverhead Unsigned32,
tNetworkQueueCIRAdaptation TAdaptationRule,
tNetworkQueuePIRAdaptation TAdaptationRule
}
tNetworkQueue OBJECT-TYPE
SYNTAX TQueueId (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The queue ID is used as the secondary index to the table entry."
::= { tNetworkQueueEntry 1 }
tNetworkQueueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry. This allows creation/deletion of rows in this
table."
::= { tNetworkQueueEntry 2 }
tNetworkQueuePoolName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tNetworkQueuePoolName specifies the pool that is associated
with this network queue. If tNetworkQueuePoolName is empty, no pool
has been associated with the queue."
DEFVAL { ''H }
::= { tNetworkQueueEntry 3 }
tNetworkQueueParent OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The scheduler to which this queue would be feeding to."
DEFVAL { ''H }
::= { tNetworkQueueEntry 4 }
tNetworkQueueLevel OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent."
DEFVAL { 1 }
::= { tNetworkQueueEntry 5 }
tNetworkQueueWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used by the scheduler to which this queue
would be feeding to."
DEFVAL { 1 }
::= { tNetworkQueueEntry 6 }
tNetworkQueueCIRLevel OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for
the above CIR traffic."
DEFVAL { 0 }
::= { tNetworkQueueEntry 7 }
tNetworkQueueCIRWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to."
DEFVAL { 1 }
::= { tNetworkQueueEntry 8 }
tNetworkQueueMCast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if this is a multicast queue or not."
DEFVAL { false }
::= { tNetworkQueueEntry 9 }
tNetworkQueueExpedite OBJECT-TYPE
SYNTAX INTEGER {
expedited (1),
auto-expedited(2),
non-expedited (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tNetworkQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this attribute should be
dynamically updated by looking at the forwarding classes mapping
into this queue. In such a case the queue is treated as
'non-expedited' if there is even a single non-expedited forwarding
class using this queue.
This attribute is associated with the queue at the time of creation
and cannot be modified thereafter."
DEFVAL { auto-expedited }
::= { tNetworkQueueEntry 10 }
tNetworkQueueCIR OBJECT-TYPE
SYNTAX TRatePercent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of max rate allowed."
DEFVAL { 0 }
::= { tNetworkQueueEntry 11 }
tNetworkQueuePIR OBJECT-TYPE
SYNTAX TPIRRatePercent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of max rate allowed."
DEFVAL { 100 }
::= { tNetworkQueueEntry 12 }
tNetworkQueueCBS OBJECT-TYPE
SYNTAX TBurstHundredthsOfPercent
UNITS "Hundredths of a percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of reserved buffer space for the queue,
defined to two decimal places."
DEFVAL { 0 }
::= { tNetworkQueueEntry 13 }
tNetworkQueueMBS OBJECT-TYPE
SYNTAX TBurstHundredthsOfPercent
UNITS "Hundredths of a percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of reserved buffer space for the queue,
defined to two decimal places."
DEFVAL { 10000 }
::= { tNetworkQueueEntry 14 }
tNetworkQueueHiPrioOnly OBJECT-TYPE
SYNTAX TBurstPercentOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of buffer space for the queue, used
exclusively by high priority packets."
DEFVAL { -1 }
::= { tNetworkQueueEntry 15 }
tNetworkQueueLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tNetworkQueueLastChanged indicates the
timestamp of last change to this row in tNetworkQueueTable."
::= { tNetworkQueueEntry 16 }
tNetworkQueueUsePortParent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tNetworkQueueUsePortParent specifies
whether this queue is parented by a port-level scheduler. When
the value is 'true', this network queue is parented by a
port-level scheduler."
DEFVAL { false }
::= { tNetworkQueueEntry 17 }
tNetworkQueuePortLvl OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tNetworkQueuePortLvl specifies the
port priority this queue will use to receive bandwidth from
the port-level scheduler for its above-cir offered load."
DEFVAL { 1 }
::= { tNetworkQueueEntry 18 }
tNetworkQueuePortWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tNetworkQueuePortWght specifies the
weight this queue will use to receive bandwidth from the
port-level scheduler for its above-cir offered load."
DEFVAL { 1 }
::= { tNetworkQueueEntry 19 }
tNetworkQueuePortCIRLvl OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tNetworkQueuePortCIRLvl specifies the
port priority this queue will use to receive bandwidth from
the port-level scheduler for its within-cir offered load."
DEFVAL { 0 }
::= { tNetworkQueueEntry 20 }
tNetworkQueuePortCIRWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tNetworkQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the
port-level scheduler for its within-cir offered load."
DEFVAL { 0 }
::= { tNetworkQueueEntry 21 }
tNetworkQueuePortAvgOverhead OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "Hundredths of a percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNetworkQueuePortAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent, used to
translate packet-based rate to frame-based rate and vice versa."
DEFVAL { 0 }
::= { tNetworkQueueEntry 22 }
tNetworkQueueCIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNetworkQueueCIRAdaptation specifies the adaptation rule
to be used while computing the operational CIR value. The adaptation
rule specifies the rules to compute the operational value while
maintaining the minimum offset."
DEFVAL { closest }
::= { tNetworkQueueEntry 23 }
tNetworkQueuePIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNetworkQueuePIRAdaptation specifies the adaptation rule
to be used while computing the operational PIR value. The adaptation
rule specifies the rules to compute the operational value while
maintaining the minimum offset."
DEFVAL { closest }
::= { tNetworkQueueEntry 24 }
--
-- network-queue policy fc table
--
tNetworkQueueFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNetworkQueueFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { tNetworkQueueObjects 3 }
tNetworkQueueFCEntry OBJECT-TYPE
SYNTAX TNetworkQueueFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { tNetworkQueuePolicy, tNetworkQueueFCName }
::= { tNetworkQueueFCTable 1 }
TNetworkQueueFCEntry ::= SEQUENCE
{
tNetworkQueueFCName TFCName,
tNetworkQueueFCRowStatus RowStatus,
tNetworkQueueFC TQueueId,
tNetworkQueueFCMCast TQueueId,
tNetworkQueueFCLastChanged TimeStamp
}
tNetworkQueueFCName OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding class name."
::= { tNetworkQueueFCEntry 1 }
tNetworkQueueFCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for this queue."
::= { tNetworkQueueFCEntry 2 }
tNetworkQueueFC OBJECT-TYPE
SYNTAX TQueueId (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific queue to be used for packets in this forwarding class."
DEFVAL { 1 }
::= { tNetworkQueueFCEntry 3 }
tNetworkQueueFCMCast OBJECT-TYPE
SYNTAX TQueueId (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The specific multicast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be
ignored wherever it is irrelevant."
DEFVAL { 9 }
::= { tNetworkQueueFCEntry 4 }
tNetworkQueueFCLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tNetworkQueueFCTable."
::= { tNetworkQueueFCEntry 7 }
--
-- shared queue policy table
--
tSharedQueuePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSharedQueuePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Alcatel 7x50 SR series Shared Queue Policy Table
for providing, via SNMP, the capability of defining the queue
policies.
tSharedQueuePolicyTable holds a list of all shared queue
policies in the managed system. Shared queue policies should
exist in this table before being referenced elsewhere.
There is a default queue policy 'default' created by the
agent and can not be deleted."
::= { tSharedQueueObjects 1 }
tSharedQueuePolicyEntry OBJECT-TYPE
SYNTAX TSharedQueuePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the tSharedQueuePolicyTable. Entries are
created and deleted in this table by SNMP sets to
tSharedQueuePolicyRowStatus."
INDEX { tSharedQueuePolicy }
::= { tSharedQueuePolicyTable 1 }
TSharedQueuePolicyEntry ::= SEQUENCE
{
tSharedQueuePolicy TNamedItem,
tSharedQueuePolicyRowStatus RowStatus,
tSharedQueuePolicyLastChanged TimeStamp,
tSharedQueuePolicyDescription TItemDescription
}
tSharedQueuePolicy OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tSharedQueuePolicy serves as an index and uniquely identifies
a queue policy in the managed system."
::= { tSharedQueuePolicyEntry 1 }
tSharedQueuePolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueuePolicyRowStatus allows entries to be created and
deleted in the tSharedQueuePolicyTable. The deletion of an
entry in this table will fail if the action is performed on the
default policy or the policy is being used within the system."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual Conventions
for SMIv2.'"
::= { tSharedQueuePolicyEntry 2 }
tSharedQueuePolicyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSharedQueuePolicyLastChanged indicates the value of sysUpTime
when the queue policy entry was last modified."
::= { tSharedQueuePolicyEntry 3 }
tSharedQueuePolicyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueuePolicyDescription specifies the user provided
description string for this queue policy entry. It can consist
of only the printable, seven-bit ASCII characters."
DEFVAL { ''H }
::= { tSharedQueuePolicyEntry 4 }
--
-- queue policy queue table
--
tSharedQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSharedQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Alcatel 7x50 SR series Shared Queue Table for
providing, via SNMP, the capability of defining the queues for
the shared queue policies existing in the tSharedQueuePolicyTable.
tSharedQueueTable holds a list of all the shared queues in the
managed system defined for the queue policies. Queues should exist
in this table before being referenced by the forwarding class
mappings within the queue policy as defined in the
tSharedQueueFCTable.
There is a default queue with the queue identifier '1' which
gets created automatically when a new queue policy is created."
::= { tSharedQueueObjects 2 }
tSharedQueueEntry OBJECT-TYPE
SYNTAX TSharedQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the tSharedQueueTable.
Entries are created/deleted in this table by SNMP sets to
tSharedQueueRowStatus.
An exception to this rule is the default queue. The default queue
is created/deleted as a result of the creation/deletion of a new
queue policy in the tSharedQueuePolicyTable."
INDEX { tSharedQueuePolicy, tSharedQueueId }
::= { tSharedQueueTable 1 }
TSharedQueueEntry ::= SEQUENCE
{
tSharedQueueId TQueueId,
tSharedQueueRowStatus RowStatus,
tSharedQueueLastChanged TimeStamp,
tSharedQueuePoolName TNamedItemOrEmpty,
tSharedQueueParent TNamedItemOrEmpty,
tSharedQueueLevel TLevel,
tSharedQueueWeight TWeight,
tSharedQueueCIRLevel TLevelOrDefault,
tSharedQueueCIRWeight TWeight,
tSharedQueueExpedite INTEGER,
tSharedQueueCIR TRatePercent,
tSharedQueuePIR TRatePercent,
tSharedQueueCBS TBurstPercent,
tSharedQueueMBS TBurstPercent,
tSharedQueueHiPrioOnly TBurstPercentOrDefault,
tSharedQueueIsMultipoint TruthValue
}
tSharedQueueId OBJECT-TYPE
SYNTAX TQueueId (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tSharedQueueId serves as the secondary index. When used in
conjunction with tSharedQueuePolicy, it uniquely identifies
a shared queue in the managed system."
::= { tSharedQueueEntry 1 }
tSharedQueueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueRowStatus allows entries to be created and deleted
in the tSharedQueueTable. The deletion of an entry in this table
will fail if the action is performed on the default queue or if
the queue is being referenced by a forwarding class mapping in
the queue policy."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual Conventions for
SMIv2.'"
::= { tSharedQueueEntry 2 }
tSharedQueueLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSharedQueueLastChanged indicates the value of sysUpTime when
the queue entry was last modified."
::= { tSharedQueueEntry 3 }
tSharedQueuePoolName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueuePoolName specifies the pool from which the queue
should be allocating its buffer. By default it will share the
default pool being used by the entity where the queue is
instantiated."
DEFVAL { ''H }
::= { tSharedQueueEntry 4 }
tSharedQueueParent OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueParent specifies the scheduler to which this queue
should be feeding into. By default there would be no parent for
the queue and it will be controlled by the entity where the
queue is instantiated."
DEFVAL { ''H }
::= { tSharedQueueEntry 5 }
tSharedQueueLevel OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueLevel specifies the level of priority to be used
by the parent entity to compute the priority of this queue
when the traffic is exceeding the committed rate."
DEFVAL { 1 }
::= { tSharedQueueEntry 6 }
tSharedQueueWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueWeight specifies the weight that this queue should
be assigned by the parent among all the entities feeding into
the parent with the same level when the traffic is exceeding the
committed rate."
DEFVAL { 1 }
::= { tSharedQueueEntry 7 }
tSharedQueueCIRLevel OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueCIRLevel specifies the level of priority to be used
by the parent entity to compute the priority of this queue when
the traffic is conforming to the committed rate.
The level '0' means treat all offered load for this queue same
as the load which is exceeding the committed rate."
DEFVAL { 0 }
::= { tSharedQueueEntry 8 }
tSharedQueueCIRWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueCIRWeight specifies the weight that this queue should
be assigned by the parent among all the entities feeding into the
parent with the same level when the traffic is conforming to the
committed rate."
DEFVAL { 1 }
::= { tSharedQueueEntry 9 }
tSharedQueueExpedite OBJECT-TYPE
SYNTAX INTEGER {
expedited (1),
auto-expedited(2),
non-expedited (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.
The value 'auto-expedited' implies that this attribute should be
dynamically updated by looking at the forwarding classes mapping
into this queue. In such a case the queue is treated as
'non-expedited' if there is even a single non-expedited forwarding
class using this queue."
DEFVAL { auto-expedited }
::= { tSharedQueueEntry 10 }
tSharedQueueCIR OBJECT-TYPE
SYNTAX TRatePercent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueCIR specifies the committed rate as a percentage of
maximum rate for this queue."
DEFVAL { 0 }
::= { tSharedQueueEntry 11 }
tSharedQueuePIR OBJECT-TYPE
SYNTAX TRatePercent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueuePIR specifies the peak rate as a percentage of
maximum rate for this queue."
DEFVAL { 100 }
::= { tSharedQueueEntry 12 }
tSharedQueueCBS OBJECT-TYPE
SYNTAX TBurstPercent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueCBS specifies the committed burst size as a percentage
of maximum reserved buffer space for the queue."
DEFVAL { 0 }
::= { tSharedQueueEntry 13 }
tSharedQueueMBS OBJECT-TYPE
SYNTAX TBurstPercent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueMBS specifies the maximum burst size as a percentage
of maximum reserved buffer space for the queue."
DEFVAL { 100 }
::= { tSharedQueueEntry 14 }
tSharedQueueHiPrioOnly OBJECT-TYPE
SYNTAX TBurstPercentOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueHiPrioOnly specifies the percentage of buffer space
to be exclusively by high priority packets as a percentage of
maximum reserved buffer space for the queue."
DEFVAL { -1 }
::= { tSharedQueueEntry 15 }
tSharedQueueIsMultipoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSharedQueueIsMultipoint specifies whether this
shared queue is a multipoint-shared queue. This object can only
be set at row creation time."
DEFVAL { false }
::= { tSharedQueueEntry 16 }
--
-- queue policy fc table
--
tSharedQueueFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSharedQueueFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Alcatel 7x50 SR series forwarding class to
shared queue mapping table for providing, via SNMP, the
capability of defining the forwarding class to shared queue
mapping for the queue policies existing in the
tSharedQueuePolicyTable.
tSharedQueueFCTable holds a list of forwarding class to
queue mappings managed system defined for the queue policies.
The forwarding classes which are not existing in this table
should use the default shared queue for this policy."
::= { tSharedQueueObjects 3 }
tSharedQueueFCEntry OBJECT-TYPE
SYNTAX TSharedQueueFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the tSharedQueueFCTable.
Entries are created/deleted in this table by SNMP sets to
tSharedQueueFCRowStatus."
INDEX { tSharedQueuePolicy, tSharedQueueFCName }
::= { tSharedQueueFCTable 1 }
TSharedQueueFCEntry ::= SEQUENCE
{
tSharedQueueFCName TFCName,
tSharedQueueFCRowStatus RowStatus,
tSharedQueueFCLastChanged TimeStamp,
tSharedQueueFCQueue TQueueId,
tSharedQueueFCMCastQueue TQueueId,
tSharedQueueFCBCastQueue TQueueId,
tSharedQueueFCUnknownQueue TQueueId
}
tSharedQueueFCName OBJECT-TYPE
SYNTAX TFCName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tSharedQueueFCName serves as the secondary index. When used in
conjunction with tSharedQueuePolicy, it uniquely identifies a
forwarding class to queue mapping in the managed system."
::= { tSharedQueueFCEntry 1 }
tSharedQueueFCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueFCRowStatus allows entries to be created and
deleted in the tSharedQueueFCTable. Deletion of an entry from
this table will cause the forwarding class to use the default
mapping."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual Conventions
for SMIv2.'"
::= { tSharedQueueFCEntry 2 }
tSharedQueueFCLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSharedQueueFCLastChanged indicates the value of sysUpTime
when the forwarding class to queue mapping entry was last
modified."
::= { tSharedQueueFCEntry 3 }
tSharedQueueFCQueue OBJECT-TYPE
SYNTAX TQueueId (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSharedQueueFCQueue specifies the logical queue that the
traffic classified into this forwarding class should use."
DEFVAL { 1 }
::= { tSharedQueueFCEntry 4 }
tSharedQueueFCMCastQueue OBJECT-TYPE
SYNTAX TQueueId (9..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSharedQueueFCMCastQueue specifies the logical
queue that mutlticast traffic classified into this forwarding
class should use."
DEFVAL { 9 }
::= { tSharedQueueFCEntry 5 }
tSharedQueueFCBCastQueue OBJECT-TYPE
SYNTAX TQueueId (17..24)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSharedQueueFCBCastQueue specifies the logical
queue that broadscast traffic classified into this forwarding
class should use."
DEFVAL { 17 }
::= { tSharedQueueFCEntry 6 }
tSharedQueueFCUnknownQueue OBJECT-TYPE
SYNTAX TQueueId (25..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSharedQueueFCUnknownQueue specifies the logical
queue that unknown traffic classified into this forwarding
class should use."
DEFVAL { 25 }
::= { tSharedQueueFCEntry 7 }
--
-- Slope policy table
--
tSlopePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSlopePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slope Policy Table. Each entry in this table defines the RED
slopes for the high and the low priority traffic."
::= { tSlopeObjects 1 }
tSlopePolicyEntry OBJECT-TYPE
SYNTAX TSlopePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slope Policy Entry."
INDEX { tSlopePolicy }
::= { tSlopePolicyTable 1 }
TSlopePolicyEntry ::= SEQUENCE
{
tSlopePolicy TNamedItem,
tSlopeRowStatus RowStatus,
tSlopeDescription TItemDescription,
tSlopeHiAdminStatus INTEGER,
tSlopeHiStartAverage Unsigned32,
tSlopeHiMaxAverage Unsigned32,
tSlopeHiMaxProbability Unsigned32,
tSlopeLoAdminStatus INTEGER,
tSlopeLoStartAverage Unsigned32,
tSlopeLoMaxAverage Unsigned32,
tSlopeLoMaxProbability Unsigned32,
tSlopeTimeAvgFactor Unsigned32,
tSlopeLastChanged TimeStamp
}
tSlopePolicy OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tSlopePolicy maintains the name of the slope policy
identifying the policy."
::= { tSlopePolicyEntry 1 }
tSlopeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry. This allows creation/deletion of rows in this
table."
::= { tSlopePolicyEntry 2 }
tSlopeDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User-provided description of the policy."
DEFVAL { ''H }
::= { tSlopePolicyEntry 3 }
tSlopeHiAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSlopeHiAdminStatus specifies the admin state for the high priority RED
slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is
inactive."
DEFVAL { down }
::= { tSlopePolicyEntry 4 }
tSlopeHiStartAverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of the buffer utilized after which the drop probability
starts to rise above 0."
DEFVAL { 70 }
::= { tSlopePolicyEntry 5 }
tSlopeHiMaxAverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped."
DEFVAL { 90 }
::= { tSlopePolicyEntry 6 }
tSlopeHiMaxProbability OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The drop probability increases steadily from 0 at the
tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the
tSlopeHiMaxAverage."
DEFVAL { 80 }
::= { tSlopePolicyEntry 7 }
tSlopeLoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tSlopeLoAdminStatus specifies the admin state for the high priority RED
slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is
inactive."
DEFVAL { down }
::= { tSlopePolicyEntry 8 }
tSlopeLoStartAverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of the buffer utilized after which the drop probability
starts to rise above 0."
DEFVAL { 50 }
::= { tSlopePolicyEntry 9 }
tSlopeLoMaxAverage OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped."
DEFVAL { 75 }
::= { tSlopePolicyEntry 10 }
tSlopeLoMaxProbability OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The drop probability increases steadily from 0 at the
tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the
tSlopeLoMaxAverage."
DEFVAL { 80 }
::= { tSlopePolicyEntry 11 }
tSlopeTimeAvgFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time average factor describes the weighting between the previous
shared buffer average utilization result and the new shared buffer
utilization in determining the new shared buffer average utilization."
DEFVAL { 7 }
::= { tSlopePolicyEntry 12 }
tSlopeLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of when this entry was last changed."
::= { tSlopePolicyEntry 13 }
--
-- Scheduler policy table
--
tSchedulerPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TSchedulerPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { tSchedulerObjects 1 }
tSchedulerPolicyEntry OBJECT-TYPE
SYNTAX TSchedulerPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Scheduler Policy."
INDEX { IMPLIED tSchedulerPolicyName }
::= { tSchedulerPolicyTable 1 }
TSchedulerPolicyEntry ::= SEQUENCE
{
tSchedulerPolicyName TNamedItem,
tSchedulerPolicyRowStatus RowStatus,
tSchedulerPolicyDescription TItemDescription,
tSchedulerPolicyLastChanged TimeStamp,
tSchedulerPolicyFrameBasedAccnt TruthValue
}
tSchedulerPolicyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the scheduler policy."
::= { tSchedulerPolicyEntry 1 }
tSchedulerPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry."
::= { tSchedulerPolicyEntry 2 }
tSchedulerPolicyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description for the scheduler policy"
DEFVAL { ''H }
::= { tSchedulerPolicyEntry 3 }
tSchedulerPolicyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"timestamp of last change to this row in tSchedulerPolicyTable."
::= { tSchedulerPolicyEntry 4 }
tSchedulerPolicyFrameBasedAccnt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tSchedulerPolicyFrameBasedAccnt specifies whether
to use frame-based accounting for the schedulers within the
scheduler policy and the children queues parented to the
scheduling policy.
If the value is 'false', the default packet-based accounting
method will be used."
DEFVAL { false }
::= { tSchedulerPolicyEntry 5 }
--
-- Virtual Scheduler table
--
tVirtualSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TVirtualSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { tSchedulerObjects 2 }
tVirtualSchedulerEntry OBJECT-TYPE
SYNTAX TVirtualSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Scheduler belonging to a Scheduler
Policy."
INDEX { tSchedulerPolicyName, tVirtualSchedulerTier,
IMPLIED tVirtualSchedulerName }
::= { tVirtualSchedulerTable 1 }
TVirtualSchedulerEntry ::= SEQUENCE
{
tVirtualSchedulerTier INTEGER,
tVirtualSchedulerName TNamedItem,
tVirtualSchedulerRowStatus RowStatus,
tVirtualSchedulerDescription TItemDescription,
tVirtualSchedulerParent TNamedItemOrEmpty,
tVirtualSchedulerLevel TLevel,
tVirtualSchedulerWeight TWeight,
tVirtualSchedulerCIRLevel TLevelOrDefault,
tVirtualSchedulerCIRWeight TWeight,
tVirtualSchedulerPIR TPIRRate,
tVirtualSchedulerCIR TCIRRate,
tVirtualSchedulerSummedCIR TruthValue,
tVirtualSchedulerLastChanged TimeStamp,
tVirtualSchedulerUsePortParent TruthValue,
tVirtualSchedulerPortLvl TLevel,
tVirtualSchedulerPortWght TWeight,
tVirtualSchedulerPortCIRLvl TLevelOrDefault,
tVirtualSchedulerPortCIRWght TWeight
}
tVirtualSchedulerTier OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tier to which this scheduler belongs to."
::= { tVirtualSchedulerEntry 1 }
tVirtualSchedulerName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the scheduler policy."
::= { tVirtualSchedulerEntry 2 }
tVirtualSchedulerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status of the entry."
::= { tVirtualSchedulerEntry 3 }
tVirtualSchedulerDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description for the scheduler policy"
DEFVAL { ''H }
::= { tVirtualSchedulerEntry 4 }
tVirtualSchedulerParent OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The scheduler to which this scheduler would be feeding to."
DEFVAL { ''H }
::= { tVirtualSchedulerEntry 5 }
tVirtualSchedulerLevel OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent."
DEFVAL { 1 }
::= { tVirtualSchedulerEntry 6 }
tVirtualSchedulerWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used by the scheduler to which this queue
would be feeding to."
DEFVAL { 1 }
::= { tVirtualSchedulerEntry 7 }
tVirtualSchedulerCIRLevel OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for
the above CIR traffic."
DEFVAL { 0 }
::= { tVirtualSchedulerEntry 8 }
tVirtualSchedulerCIRWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to."
DEFVAL { 1 }
::= { tVirtualSchedulerEntry 9 }
tVirtualSchedulerPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rate allowed for this scheduler. A value of -1 implies
maximum."
DEFVAL { -1 }
::= { tVirtualSchedulerEntry 10 }
tVirtualSchedulerCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rate allowed for this scheduler. A value of -1 implies
maximum."
DEFVAL { 0 }
::= { tVirtualSchedulerEntry 11 }
tVirtualSchedulerSummedCIR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tVirtualSchedulerSummedCIR specifies if the CIR should be
used as the summed value of the children. If set to 'true',
tVirtualSchedulerCIR loses its meaning."
DEFVAL { true }
::= { tVirtualSchedulerEntry 12 }
tVirtualSchedulerLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tVirtualSchedulerLastChanged indicates the
timestamp of last change to this row in tVirtualSchedulerTable."
::= { tVirtualSchedulerEntry 13 }
tVirtualSchedulerUsePortParent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tVirtualSchedulerUsePortParent specifies
whether this scheduler is parented by a port-level scheduler. When
the value is 'true', this virtual scheduler is parented by a
port-level scheduler. This object is mutually exclusive with
tVirtualSchedulerParent. Only one kind of parent is allowed."
DEFVAL { false }
::= { tVirtualSchedulerEntry 14 }
tVirtualSchedulerPortLvl OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tVirtualSchedulerPortLvl specifies the
port priority this scheduler will use to receive bandwidth from
the port-level scheduler for its above-cir offered load."
DEFVAL { 1 }
::= { tVirtualSchedulerEntry 15 }
tVirtualSchedulerPortWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tVirtualSchedulerPortWght specifies the
weight this scheduler will use to receive bandwidth from the
port-level scheduler for its above-cir offered load."
DEFVAL { 1 }
::= { tVirtualSchedulerEntry 16 }
tVirtualSchedulerPortCIRLvl OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tVirtualSchedulerPortCIRLvl specifies the
port priority this scheduler will use to receive bandwidth from
the port-level scheduler for its within-cir offered load."
DEFVAL { 0 }
::= { tVirtualSchedulerEntry 17 }
tVirtualSchedulerPortCIRWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object tVirtualSchedulerPortCIRWght specifies the
weight this scheduler will use to receive bandwidth from the
port-level scheduler for its within-cir offered load."
DEFVAL { 0 }
::= { tVirtualSchedulerEntry 18 }
--
-- Port Scheduler plcy table
--
tPortSchedulerPlcyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TPortSchedulerPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tPortSchedulerPlcyTable has an entry for each port scheduler
configured on this system."
::= { tSchedulerObjects 3 }
tPortSchedulerPlcyEntry OBJECT-TYPE
SYNTAX TPortSchedulerPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a particular port scheduler. Entries are created
and deleted by the user."
INDEX { IMPLIED tPortSchedulerPlcyName }
::= { tPortSchedulerPlcyTable 1 }
TPortSchedulerPlcyEntry ::= SEQUENCE
{
tPortSchedulerPlcyName TNamedItem,
tPortSchedulerPlcyRowStatus RowStatus,
tPortSchedulerPlcyDescription TItemDescription,
tPortSchedulerPlcyLastChanged TimeStamp,
tPortSchedulerPlcyMaxRate TPortSchedulerPIR,
tPortSchedulerPlcyLvl1PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl1CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl2PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl2CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl3PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl3CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl4PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl4CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl5PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl5CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl6PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl6CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl7PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl7CIR TPortSchedulerCIR,
tPortSchedulerPlcyLvl8PIR TPortSchedulerPIR,
tPortSchedulerPlcyLvl8CIR TPortSchedulerCIR,
tPortSchedulerPlcyOrphanLvl TLevel,
tPortSchedulerPlcyOrphanWeight TWeight,
tPortSchedulerPlcyOrphanCIRLvl TLevelOrDefault,
tPortSchedulerPlcyOrphanCIRWght TWeight
}
tPortSchedulerPlcyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyName specifies the name of the port
scheduler."
::= { tPortSchedulerPlcyEntry 1 }
tPortSchedulerPlcyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyRowStatus is used for the creation
and deletion of port scheduler policies."
::= { tPortSchedulerPlcyEntry 2 }
tPortSchedulerPlcyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyDescription specifies the description
of this port scheduler."
DEFVAL { "" }
::= { tPortSchedulerPlcyEntry 3 }
tPortSchedulerPlcyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLastChanged indicates the value of
sysUpTime at the time of the most recent management change to this
row."
::= { tPortSchedulerPlcyEntry 4 }
tPortSchedulerPlcyMaxRate OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum
frame based bandwidth limit of this port scheduler."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 5 }
tPortSchedulerPlcyLvl1PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth
limit, PIR, for priority level 1."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 6 }
tPortSchedulerPlcyLvl1CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir
bandwidth limit for priority level 1."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 7 }
tPortSchedulerPlcyLvl2PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth
limit, PIR, for priority level 2."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 8 }
tPortSchedulerPlcyLvl2CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir
bandwidth limit for priority level 2."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 9 }
tPortSchedulerPlcyLvl3PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth
limit, PIR, for priority level 3."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 10 }
tPortSchedulerPlcyLvl3CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir
bandwidth limit for priority level 3."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 11 }
tPortSchedulerPlcyLvl4PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth
limit, PIR, for priority level 4."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 12 }
tPortSchedulerPlcyLvl4CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir
bandwidth limit for priority level 4."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 13 }
tPortSchedulerPlcyLvl5PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth
limit, PIR, for priority level 5."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 14 }
tPortSchedulerPlcyLvl5CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir
bandwidth limit for priority level 5."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 15 }
tPortSchedulerPlcyLvl6PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth
limit, PIR, for priority level 6."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 16 }
tPortSchedulerPlcyLvl6CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir
bandwidth limit for priority level 6."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 17 }
tPortSchedulerPlcyLvl7PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth
limit, PIR, for priority level 7."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 18 }
tPortSchedulerPlcyLvl7CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir
bandwidth limit for priority level 7."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 19 }
tPortSchedulerPlcyLvl8PIR OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth
limit, PIR, for priority level 8."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 20 }
tPortSchedulerPlcyLvl8CIR OBJECT-TYPE
SYNTAX TPortSchedulerCIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir
bandwidth limit for priority level 8."
DEFVAL { -1 }
::= { tPortSchedulerPlcyEntry 21 }
tPortSchedulerPlcyOrphanLvl OBJECT-TYPE
SYNTAX TLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyOrphanLvl specifies the port priority
of orphaned queues and schedulers that are above-cir."
DEFVAL { 1 }
::= { tPortSchedulerPlcyEntry 22 }
tPortSchedulerPlcyOrphanWeight OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyOrphanWeight specifies the weight of
orphaned queues and schedulers that are above-cir."
DEFVAL { 0 }
::= { tPortSchedulerPlcyEntry 23 }
tPortSchedulerPlcyOrphanCIRLvl OBJECT-TYPE
SYNTAX TLevelOrDefault
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority
of orphaned queues and schedulers that are within-cir."
DEFVAL { 0 }
::= { tPortSchedulerPlcyEntry 24 }
tPortSchedulerPlcyOrphanCIRWght OBJECT-TYPE
SYNTAX TWeight
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of
orphaned queues and schedulers that are within-cir."
DEFVAL { 0 }
::= { tPortSchedulerPlcyEntry 25 }
--
-- Qos Domain Time Stamps
--
tQosDomainLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tQosDomainLastChanged indicates the
timestamp of last change to the QoS Domain."
::= { tQosTimeStampObjects 1 }
tDSCPNameTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tDSCPNameTableLastChanged indicates the
timestamp of last change to the DSCP Name Table."
::= { tQosTimeStampObjects 5 }
tFCNameTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tFCNameTableLastChanged indicates the
timestamp of last change to the FC Name Table."
::= { tQosTimeStampObjects 10 }
tSapIngressTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tSapIngressTableLastChanged indicates the
timestamp of last change to the Sap Ingress Policy Table."
::= { tQosTimeStampObjects 20 }
tSapIngressQueueTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressQueueTableLastChanged maintains the timestamp of
the last change made to the Sap Ingress Queue Table."
::= { tQosTimeStampObjects 21 }
tSapIngressDSCPTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressDSCPTableLastChanged maintains the timestamp of the
last change made to the Sap Ingress DSCP Mapping Table."
::= { tQosTimeStampObjects 22 }
tSapIngressDot1pTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressDot1pTableLastChanged maintains the timestamp of the
last change made to the Sap Ingress Dot1p Table."
::= { tQosTimeStampObjects 23 }
tSapIngressIPCriteriaTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressIPCriteriaTableLastChanged maintains the timestamp of
the last change made to the Sap Ingress IP Criteria Table."
::= { tQosTimeStampObjects 24 }
tSapIngressMacCriteriaTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressMacCriteriaTableLastChanged maintains the timestamp
of the last change made to the Sap Ingress Mac Criteria Table."
::= { tQosTimeStampObjects 25 }
tSapIngressFCTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressFCTableLastChanged maintains the timestamp of the
last change made to the Sap Ingress FC Table."
::= { tQosTimeStampObjects 26 }
tSapIngressPrecTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapIngressPrecTableLastChanged maintains the timestamp of the
last change made to the Sap Ingress Precedence Table."
::= { tQosTimeStampObjects 27 }
tSapEgressTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapEgressTableLastChanged maintains the timestamp of the
last change made to the Sap Egress Policy Table."
::= { tQosTimeStampObjects 30 }
tSapEgressQueueTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapEgressQueueTableLastChanged maintains the timestamp of
the last change made to the Sap Egress Queue Table."
::= { tQosTimeStampObjects 31 }
tSapEgressFCTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSapEgressFCTableLastChanged maintains the timestamp of the
last change made to the Sap Egress FC Table."
::= { tQosTimeStampObjects 32 }
tNetworkPolicyTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkPolicyTableLastChanged maintains the timestamp of the
last change made to the Network Policy Table."
::= { tQosTimeStampObjects 40 }
tNetworkIngressDSCPTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkIngressDSCPTableLastChanged maintains the timestamp of
the last change made to the Network Ingress DSCP Mapping Table."
::= { tQosTimeStampObjects 41 }
tNetworkIngressLSPEXPTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkIngressLSPEXPTableLastChanged maintains the timestamp
of the last change made to the Network Ingress LSPEXP Table."
::= { tQosTimeStampObjects 42 }
tNetworkEgressFCTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkEgressFCTableLastChanged maintains the timestamp of
the last change made to the Network Egress FC Table."
::= { tQosTimeStampObjects 43 }
tNetworkIngressDot1pTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkIngressDot1pTableLastChanged maintains the timestamp
of the last change made to the Network Ingress Dot1p Table."
::= { tQosTimeStampObjects 44 }
tNetworkQueuePolicyTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkQueuePolicyTableLastChanged maintains the timestamp of
the last change made to the Network Queue Policy Table."
::= { tQosTimeStampObjects 50 }
tNetworkQueueTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkQueueTableLastChanged maintains the timestamp of the
last change made to the Network Queue Table."
::= { tQosTimeStampObjects 51 }
tNetworkQueueFCTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tNetworkQueueFCTableLastChanged maintains the timestamp of the
last change made to the Network Queue FC Table."
::= { tQosTimeStampObjects 52 }
tSlopePolicyTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSlopePolicyTableLastChanged maintains the timestamp of the
last change made to the Slope Policy Table."
::= { tQosTimeStampObjects 55 }
tSchedulerPolicyTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSchedulerPolicyTableLastChanged maintains the timestamp of
the last change made to the Scheduler Policy Table."
::= { tQosTimeStampObjects 60 }
tVirtualSchedulerTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tVirtualSchedulerTableLastChanged maintains the timestamp of
the last change made to the Virtual Scheduler Table."
::= { tQosTimeStampObjects 61 }
tAtmTdpTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tAtmTdpTableLastChanged maintains the timestamp of
the last change made to the Traffic Descriptor Profile Table."
::= { tQosTimeStampObjects 62 }
tSharedQueuePolicyTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSharedQueuePolicyTableLastChanged maintains the timestamp of
the last change made to the Queue Policy Table."
::= { tQosTimeStampObjects 63 }
tSharedQueueTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSharedQueueTableLastChanged maintains the timestamp of the
last change made to the Queue Table."
::= { tQosTimeStampObjects 64 }
tSharedQueueFCTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tSharedQueueFCTableLastChanged maintains the timestamp of the
last change made to the Queue FC Table."
::= { tQosTimeStampObjects 65 }
tSapIngressIPv6CriteriaTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object tSapIngressIPv6CriteriaTableLastChanged
indicates the timestamp of the last change made to the Sap Ingress
IPv6 Criteria Table."
::= { tQosTimeStampObjects 66 }
tNamedPoolPolicyTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime
at the time of the last modification of an entry in the
tNamedPoolPolicyTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value."
::= { tQosTimeStampObjects 73 }
tQ1NamedPoolTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime
at the time of the last modification of an entry in the
tQ1NamedPoolTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value."
::= { tQosTimeStampObjects 74 }
--
-- Atm Traffic Descriptor Table
--
tAtmTdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF TAtmTdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on ATM traffic
descriptors for controlling ATM traffic
management capabilities."
::= { tAtmTdpObjects 1}
tAtmTdpEntry OBJECT-TYPE
SYNTAX TAtmTdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains ATM traffic descriptor
objects and the associated parameters. All objects that
do not apply to a given service category are given default
values of zero."
INDEX {tAtmTdpIndex}
::= { tAtmTdpTable 1}
TAtmTdpEntry ::= SEQUENCE
{
tAtmTdpIndex AtmTrafficDescrParamIndex,
tAtmTdpSir Unsigned32,
tAtmTdpPir Unsigned32,
tAtmTdpMbs Unsigned32,
tAtmTdpMir Unsigned32,
tAtmTdpShaping INTEGER,
tAtmTdpServCat AtmServiceCategory,
tAtmTdpDescription TItemDescription,
tAtmTdpLastChanged TimeStamp,
tAtmTdpRowStatus RowStatus,
tAtmTdpDescrType TAtmTdpDescrType,
tAtmTdpCdvt Unsigned32,
tAtmTdpPolicing INTEGER,
tAtmTdpCLPTagging INTEGER
}
tAtmTdpIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex (1..1000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to identify an entity
inside the tAtmTdpTable.
When creating a new row in the table
the value of this index may be obtained
by retrieving the value of tAtmTdpIndexNext."
::= { tAtmTdpEntry 1 }
tAtmTdpSir OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpSir identifies the sustained information rate
in kilobits per second.
The default Sir is determined by the Service Category.
The following default applies to Sir that is modifiable
depending upon a given service category:
Applicable Service Category Default Sir Value
RT-VBR 0
NRT-VBR 0
Note that for the service categories given above,
the value of Sir must be less than or equal to
the value of Pir."
::= { tAtmTdpEntry 2 }
tAtmTdpPir OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpPir identifies the peak information rate
in kilobits per second.
The default Pir is determined by the Service Category.
The following default applies to Pir that is modifiable
depending upon a given service category:
Applicable Service Category Default Pir Value
UBR (with/without Mir) 4294967295
CBR 0
RT-VBR 0
NRT-VBR 0"
::= { tAtmTdpEntry 3 }
tAtmTdpMbs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpMbs identifies the maximum burst size
in cells.
The default Mbs is determined by the Service Category.
The following default applies to Mbs that is modifiable
depending upon a given service category:
Applicable Service Category Default Mbs Value
RT-VBR 32
NRT-VBR 32"
::= { tAtmTdpEntry 4 }
tAtmTdpMir OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpMir identifies the Minimum Information Rate
in kilobits per second.
The default Mir is determined by the Service Category.
The following default applies for Mir that is modifiable
depending upon a given service category:
Applicable Service Category Default Mir Value
UBR (with/without Mir) 0
Note that for the service categories given above,
the value of Mir must be less than or equal to
the value of Pir."
::= { tAtmTdpEntry 5 }
tAtmTdpShaping OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpShaping determines whether egress shaping should occur.
The default tAtmTdpShaping is determined by the Service Category.
The following default applies for tAtmTdpShaping
depending upon a given service category:
Applicable Service Category Default Shaping Value
UBR disabled
CBR enabled
RT-VBR enabled
NRT-VBR enabled
For a Service Category of UBR, tAtmTdpShaping cannot be enabled.
For CBR and RT-VBR service cateories disabling shaping is
MDA-dependent.
Shaping is only applied in the egress direction."
::= { tAtmTdpEntry 6 }
tAtmTdpServCat OBJECT-TYPE
SYNTAX AtmServiceCategory
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpServCat determines the ATM service category."
DEFVAL { ubr }
::= { tAtmTdpEntry 7 }
tAtmTdpDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tAtmTdpDescription specifies an ASCII string used
to describe the ATM traffic descriptor."
::= { tAtmTdpEntry 8 }
tAtmTdpLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tAtmTdpLastChanged maintains the timestamp of the last change
made to a row in the Traffic Descriptor Profile Table."
::= { tAtmTdpEntry 9 }
tAtmTdpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpRowStatus is used to create/modify/delete a new row in
this table. Only createAndGo/Active/Destroy are supported"
::= { tAtmTdpEntry 10 }
tAtmTdpDescrType OBJECT-TYPE
SYNTAX TAtmTdpDescrType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpDescrType identifies the types of ATM traffic descriptor.
The default is determined by the value of tAtmTdpServCat.
The following default rules apply:
Applicable Service Category tAtmTdpDescrType
UBR clp0And1pcr
CBR clp0And1pcr
RT-VBR clp0And1pcrPlusClp0And1scr
NRT-VBR clp0And1pcrPlusClp0And1scr"
::= { tAtmTdpEntry 11 }
tAtmTdpCdvt OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpCdvt identifies the Cell Delay Variation
Tolerance in microseconds.
The following default applies for Cdvt that is modifiable
depending upon a given service category:
Applicable Service Category Default Cdvt Value
CBR/RT-VBR/NRT-VBR/UBR 250 "
::= { tAtmTdpEntry 12 }
tAtmTdpPolicing OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpPolicing determines whether ingress traffic is policed.
Policing by default is disabled. Policing is valid for CBR, UBR
RT-VBR and NRT-VBR. This is cell-based policing.
tAtmTdpDescrType Policing Scheme Applicable Serv Cat
clp0And1pcr CBR.1 CBR and UBR
clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR
clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR
clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR"
::= { tAtmTdpEntry 13 }
tAtmTdpCLPTagging OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"tAtmTdpCLPTagging controls the setting of the CLP bit in the
ATM cell header for egress traffic on an IES or VPRN SAP.
If disabled (the default), all traffic has the CLP bit set
to zero. If enabled, traffic queued on expedited queues has
the CLP bit set to zero, while traffic on non-expedited queues
has the CLP bit set to one."
DEFVAL { disabled }
::= { tAtmTdpEntry 14 }
--
-- Named Pool Policy Table
--
tNamedPoolPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNamedPoolPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on Named buffer pools policy."
::= { tPoolObjects 1 }
tNamedPoolPolicyEntry OBJECT-TYPE
SYNTAX TNamedPoolPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains Named buffer pools policy related information."
INDEX {tNamedPoolPolicyName}
::= { tNamedPoolPolicyTable 1}
TNamedPoolPolicyEntry ::= SEQUENCE
{
tNamedPoolPolicyName TNamedItem,
tNamedPoolPolicyRowStatus RowStatus,
tNamedPoolPolicyLastChanged TimeStamp,
tNamedPoolPolicyDescription TItemDescription,
tNamedPoolPolicyQ1DefaultWeight Unsigned32,
tNamedPoolPolicyQ1MdaWeight Unsigned32,
tNamedPoolPolicyQ1PortWeight Unsigned32
}
tNamedPoolPolicyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyName indicates the name of
Named pool policy."
::= { tNamedPoolPolicyEntry 1 }
tNamedPoolPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyRowStatus is used for
creation or deletion of named pool policies."
::= { tNamedPoolPolicyEntry 2 }
tNamedPoolPolicyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyLastChanged indicates the
sysUpTime when this row was last modified."
::= { tNamedPoolPolicyEntry 3 }
tNamedPoolPolicyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyDescription specifies the
description for a specific named pool policy."
DEFVAL { "" }
::= { tNamedPoolPolicyEntry 4 }
tNamedPoolPolicyQ1DefaultWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyQ1DefaultWeight specifies
the port allocation weight given to the default pools."
DEFVAL { 50 }
::= { tNamedPoolPolicyEntry 5 }
tNamedPoolPolicyQ1MdaWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyQ1MdaWeight specifies
the port allocation weight given to the MDA named pools."
DEFVAL { 50 }
::= { tNamedPoolPolicyEntry 6 }
tNamedPoolPolicyQ1PortWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tNamedPoolPolicyQ1PortWeight specifies
the port allocation weight given to the local port
named pools."
DEFVAL { 50 }
::= { tNamedPoolPolicyEntry 7 }
--
-- Q1 Named Pool Table
--
tQ1NamedPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF TQ1NamedPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on Q1 pools policy."
::= { tPoolObjects 2 }
tQ1NamedPoolEntry OBJECT-TYPE
SYNTAX TQ1NamedPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains Q1 pools policy related information."
INDEX {tQ1NamedPoolPolicyName,
tQ1NamedPoolName}
::= { tQ1NamedPoolTable 1}
TQ1NamedPoolEntry ::= SEQUENCE
{
tQ1NamedPoolPolicyName TNamedItem,
tQ1NamedPoolName TNamedItem,
tQ1NamedPoolRowStatus RowStatus,
tQ1NamedPoolLastChanged TimeStamp,
tQ1NamedPoolDescription TItemDescription,
tQ1NamedPoolNetworkAllocWeight Unsigned32,
tQ1NamedPoolAccessAllocWeight Unsigned32,
tQ1NamedPoolSlopePolicy TNamedItemOrEmpty,
tQ1NamedPoolReservedCbs Integer32
}
tQ1NamedPoolPolicyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolPolicyName indicates the name of
the existing Q1 named pool policy."
::= { tQ1NamedPoolEntry 1 }
tQ1NamedPoolName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolName indicates the name of
the existing pool within the policy."
::= { tQ1NamedPoolEntry 2 }
tQ1NamedPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolRowStatus is used for
creation or deletion of Q1 named pools."
::= { tQ1NamedPoolEntry 3 }
tQ1NamedPoolLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolLastChanged indicates the
sysUpTime when this row was last modified. "
::= { tQ1NamedPoolEntry 4 }
tQ1NamedPoolDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolDescription specifies the
description for a specific Q1 named pool."
DEFVAL { "" }
::= { tQ1NamedPoolEntry 5 }
tQ1NamedPoolNetworkAllocWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolNetworkAllocWeight specifies
the weight used to divide network associated buffer
space between named pools."
DEFVAL { 50 }
::= { tQ1NamedPoolEntry 6 }
tQ1NamedPoolAccessAllocWeight OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolAccessAllocWeight specifies
the weight used to divide access associated buffer
space between named pools."
DEFVAL { 50 }
::= { tQ1NamedPoolEntry 7 }
tQ1NamedPoolSlopePolicy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolSlopePolicy specifies the
name of the slop-policy which is used to override
the default slope-policy for the named buffer pool."
DEFVAL { ''H }
::= { tQ1NamedPoolEntry 8 }
tQ1NamedPoolReservedCbs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tQ1NamedPoolReservedCbs specifies the
reserved CBS size of the pool. The reserved CBS
(Committed Burst Size) defines the amount of buffer
space within the pool that is not considered shared."
DEFVAL { 30 }
::= { tQ1NamedPoolEntry 9 }
--
-- The following object may be used in conjunction with
-- the atmTrafficDescrParamTable for the creation of
-- new table entries.
--
tAtmTdpIndexNext OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
tAtmTdpIndex when creating entries in the tAtmTdpTable.
The value 0 indicates that no unassigned entries are
available. To obtain the tAtmTdpIndex value for a new
entry, the manager issues a management protocol
retrieval operation to obtain the current value of this
object. After each retrieval, the agent should modify the
value to the next unassigned index.
After a manager retrieves a value the agent will determine
through its local policy when this index value will be made
available for reuse."
::= { tAtmTdpObjects 2 }
---
--- The following objects are to be used in
--- conjunction with the tAtmTdpTable
--- for information on profile limits and consumed
--- profiles.
---
tAtmTdpsMaxSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the maximum number of ATM
Traffic Descriptor Profiles that can be configured
on this system."
::= { tAtmTdpObjects 3 }
tAtmTdpsCurrentlyConfigured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of currently configured
ATM Traffic Descriptor Profiles on this system."
::= { tAtmTdpObjects 4 }
--
-- Conformance Information
--
tmnxQosCompliances OBJECT IDENTIFIER ::= { tmnxQosConformance 1 }
tmnxQosGroups OBJECT IDENTIFIER ::= { tmnxQosConformance 2 }
--
-- compliance statements
--
-- tmnxQosCompliance MODULE-COMPLIANCE
-- ::= { tmnxQosCompliances 1 }
-- tmnxQosR2r1Compliance MODULE-COMPLIANCE
-- ::= { tmnxQosCompliances 2 }
-- tmnxQosV3v0Compliance MODULE-COMPLIANCE
-- ::= { tmnxQosCompliances 3 }
tmnxQos7450V4v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of QOS features
on Alcatel 7450 ESS series systems release R4.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxQosGlobalGroup,
tmnxQosDSCPGroup,
tmnxQosFCGroup,
tmnxQosSapIngressV4v0Group,
tmnxQosSapEgressR2r1Group,
tmnxQosNetworkR2r1Group,
tmnxQosSlopeGroup,
tmnxQosSchedulerGroup,
-- tmnxQosAtmTdpV3v0Group,
tmnxQosQueueV4v0Group
-- tmnxQosSapIpv6FilterR4r0Group
}
::= { tmnxQosCompliances 4 }
tmnxQos7750V4v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of QOS features
on Alcatel 7750 SR series systems release R4.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxQosGlobalGroup,
tmnxQosDSCPGroup,
tmnxQosFCGroup,
tmnxQosSapIngressV4v0Group,
tmnxQosSapEgressR2r1Group,
tmnxQosNetworkR2r1Group,
tmnxQosSlopeGroup,
tmnxQosSchedulerGroup,
tmnxQosAtmTdpV3v0Group,
tmnxQosQueueV4v0Group,
tmnxQosSapIpv6FilterR4r0Group
}
::= { tmnxQosCompliances 5 }
tmnxQos7450V5v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of QOS features
on Alcatel 7450 ESS series systems release R5.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxQosGlobalGroup,
tmnxQosDSCPGroup,
tmnxQosFCGroup,
tmnxQosSapIngressV4v0Group,
tmnxQosSapEgressV5v0Group,
tmnxQosNetworkV5v0Group,
tmnxQosSlopeGroup,
tmnxQosSchedulerV5v0Group,
-- tmnxQosAtmTdpV5v0Group,
tmnxQosQueueV4v0Group
-- tmnxQosSapIpv6FilterR4r0Group
}
::= { tmnxQosCompliances 6 }
tmnxQos7750V5v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of QOS features
on Alcatel 7750 SR series systems release R5.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxQosGlobalGroup,
tmnxQosDSCPGroup,
tmnxQosFCGroup,
tmnxQosSapIngressV4v0Group,
tmnxQosSapEgressV5v0Group,
tmnxQosNetworkV5v0Group,
tmnxQosSlopeGroup,
tmnxQosSchedulerV5v0Group,
tmnxQosAtmTdpV5v0Group,
tmnxQosQueueV4v0Group,
tmnxQosSapIpv6FilterR4r0Group
}
::= { tmnxQosCompliances 7 }
tmnxQos7450V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of QOS features
on Alcatel 7450 ESS series systems release R6.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxQosGlobalGroup,
tmnxQosDSCPGroup,
tmnxQosFCGroup,
tmnxQosSapIngressV6v0Group,
tmnxQosSapEgressV6v0Group,
tmnxQosNetworkV6v0Group,
tmnxQosSlopeGroup,
tmnxQosSchedulerV5v0Group,
-- tmnxQosAtmTdpV5v0Group,
tmnxQosQueueV4v0Group,
-- tmnxQosSapIpv6FilterR4r0Group
tmnxQosFrameBasedV6v0Group,
tmnxQosNamedPoolPolicyV6v0Group
}
::= { tmnxQosCompliances 8 }
tmnxQos7750V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of QOS features
on Alcatel 7750 SR series systems release R6.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxQosGlobalGroup,
tmnxQosDSCPGroup,
tmnxQosFCGroup,
tmnxQosSapIngressV6v0Group,
tmnxQosSapEgressV6v0Group,
tmnxQosNetworkV6v0Group,
tmnxQosSlopeGroup,
tmnxQosSchedulerV5v0Group,
tmnxQosAtmTdpV5v0Group,
tmnxQosQueueV4v0Group,
tmnxQosSapIpv6FilterR4r0Group,
tmnxQosFrameBasedV6v0Group,
tmnxQosNamedPoolPolicyV6v0Group
}
::= { tmnxQosCompliances 9 }
--
-- units of conformance
--
tmnxQosGlobalGroup OBJECT-GROUP
OBJECTS {
tQosDomainLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting general management of QOS
features on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 1 }
tmnxQosDSCPGroup OBJECT-GROUP
OBJECTS {
tDSCPNameRowStatus,
tDSCPNameStorageType,
tDSCPNameDscpValue,
tDSCPNameLastChanged,
tDSCPNameTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Differential Services
Code Points on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 2 }
tmnxQosFCGroup OBJECT-GROUP
OBJECTS {
tFCRowStatus,
tFCStorageType,
tFCValue,
tFCNameLastChanged,
tFCNameTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Forwarding Classes
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 3 }
-- tmnxQosSapIngressGroup OBJECT-GROUP
-- ::= { tmnxQosGroups 4 }
-- tmnxQosSapEgressGroup OBJECT-GROUP
-- ::= { tmnxQosGroups 5 }
-- tmnxQosNetworkGroup OBJECT-GROUP
-- ::= { tmnxQosGroups 6 }
tmnxQosSlopeGroup OBJECT-GROUP
OBJECTS {
tSlopeRowStatus,
tSlopeDescription,
tSlopeHiAdminStatus,
tSlopeHiStartAverage,
tSlopeHiMaxAverage,
tSlopeHiMaxProbability,
tSlopeLoAdminStatus,
tSlopeLoStartAverage,
tSlopeLoMaxAverage,
tSlopeLoMaxProbability,
tSlopeTimeAvgFactor,
tSlopeLastChanged,
tSlopePolicyTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Slope policies
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 7 }
tmnxQosSchedulerGroup OBJECT-GROUP
OBJECTS {
tSchedulerPolicyRowStatus,
tSchedulerPolicyDescription,
tSchedulerPolicyLastChanged,
tSchedulerPolicyTableLastChanged,
tVirtualSchedulerRowStatus,
tVirtualSchedulerDescription,
tVirtualSchedulerParent,
tVirtualSchedulerLevel,
tVirtualSchedulerWeight,
tVirtualSchedulerCIRLevel,
tVirtualSchedulerCIRWeight,
tVirtualSchedulerPIR,
tVirtualSchedulerCIR,
tVirtualSchedulerSummedCIR,
tVirtualSchedulerLastChanged,
tVirtualSchedulerTableLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Scheduler policies
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 8 }
-- tmnxQosAtmTdpR2r1Group OBJECT-GROUP
-- ::= { tmnxQosGroups 9 }
tQosObsoleteObjectsGroup OBJECT-GROUP
OBJECTS {
tSapIngressQueueOperPIR,
tSapIngressQueueOperCIR,
tSapEgressQueueOperPIR,
tSapEgressQueueOperCIR
}
STATUS current
DESCRIPTION
"The group of obsolete objects in the ALCATEL-IND1-TIMETRA-QOS-MIB."
::= { tmnxQosGroups 10 }
-- tmnxQosSapIngressR2r1Group OBJECT-GROUP
-- ::= { tmnxQosGroups 11 }
tmnxQosSapEgressR2r1Group OBJECT-GROUP
OBJECTS {
tSapEgressRowStatus,
tSapEgressScope,
tSapEgressDescription,
tSapEgressLastChanged,
tSapEgressTableLastChanged,
tSapEgressQueueRowStatus,
tSapEgressQueueParent,
tSapEgressQueueLevel,
tSapEgressQueueWeight,
tSapEgressQueueCIRLevel,
tSapEgressQueueCIRWeight,
tSapEgressQueueExpedite,
tSapEgressQueueCBS,
tSapEgressQueueMBS,
tSapEgressQueueHiPrioOnly,
tSapEgressQueueCIRAdaptation,
tSapEgressQueuePIRAdaptation,
tSapEgressQueueAdminPIR,
tSapEgressQueueAdminCIR,
tSapEgressQueueLastChanged,
tSapEgressQueueTableLastChanged,
tSapEgressFCRowStatus,
tSapEgressFCQueue,
tSapEgressFCDot1PValue,
tSapEgressFCLastChanged,
tSapEgressFCTableLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of SAP egress QoS
policies on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 12 }
tmnxQosNetworkR2r1Group OBJECT-GROUP
OBJECTS {
tNetworkPolicyRowStatus,
tNetworkPolicyScope,
tNetworkPolicyDescription,
tNetworkPolicyIngressDefaultActionFC,
tNetworkPolicyIngressDefaultActionProfile,
tNetworkPolicyEgressRemark,
tNetworkPolicyLastChanged,
tNetworkPolicyIngressLerUseDscp,
tNetworkPolicyTableLastChanged,
tNetworkIngressDSCPRowStatus,
tNetworkIngressDSCPFC,
tNetworkIngressDSCPProfile,
tNetworkIngressDSCPLastChanged,
tNetworkIngressDSCPTableLastChanged,
tNetworkIngressDot1pRowStatus,
tNetworkIngressDot1pFC,
tNetworkIngressDot1pProfile,
tNetworkIngressDot1pLastChanged,
tNetworkIngressDot1pTableLastChanged,
tNetworkIngressLSPEXPRowStatus,
tNetworkIngressLSPEXPFC,
tNetworkIngressLSPEXPProfile,
tNetworkIngressLSPEXPLastChanged,
tNetworkIngressLSPEXPTableLastChanged,
tNetworkEgressFCDSCPInProfile,
tNetworkEgressFCDSCPOutProfile,
tNetworkEgressFCLspExpInProfile,
tNetworkEgressFCLspExpOutProfile,
tNetworkEgressFCDot1pInProfile,
tNetworkEgressFCDot1pOutProfile,
tNetworkEgressFCLastChanged,
tNetworkEgressFCTableLastChanged,
tNetworkQueuePolicyRowStatus,
tNetworkQueuePolicyDescription,
tNetworkQueuePolicyLastChanged,
tNetworkQueuePolicyTableLastChanged,
tNetworkQueueRowStatus,
tNetworkQueuePoolName,
tNetworkQueueParent,
tNetworkQueueLevel,
tNetworkQueueWeight,
tNetworkQueueCIRLevel,
tNetworkQueueCIRWeight,
tNetworkQueueMCast,
tNetworkQueueExpedite,
tNetworkQueueCIR,
tNetworkQueuePIR,
tNetworkQueueCBS,
tNetworkQueueMBS,
tNetworkQueueHiPrioOnly,
tNetworkQueueLastChanged ,
tNetworkQueueTableLastChanged,
tNetworkQueueFCRowStatus,
tNetworkQueueFC,
tNetworkQueueFCMCast,
tNetworkQueueFCLastChanged,
tNetworkQueueFCTableLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Network QoS policies
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 13 }
-- tmnxQosQueueR2r1Group OBJECT-GROUP
-- ::= { tmnxQosGroups 14 }
tmnxQosAtmTdpV3v0Group OBJECT-GROUP
OBJECTS {
tAtmTdpSir,
tAtmTdpPir,
tAtmTdpMbs,
tAtmTdpMir,
tAtmTdpShaping,
tAtmTdpServCat,
tAtmTdpLastChanged,
tAtmTdpDescription,
tAtmTdpRowStatus,
tAtmTdpDescrType,
tAtmTdpCdvt,
tAtmTdpPolicing,
tAtmTdpIndexNext,
tAtmTdpsMaxSupported,
tAtmTdpsCurrentlyConfigured,
tAtmTdpTableLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects for ATM Traffic Descriptor Profiles
on Alcatel 7x50 SR series systems release 3.0."
::= { tmnxQosGroups 15 }
tmnxQosSapIpv6FilterR4r0Group OBJECT-GROUP
OBJECTS {
tSapIngressIPv6CriteriaRowStatus,
tSapIngressIPv6CriteriaDescription,
tSapIngressIPv6CriteriaActionFC,
tSapIngressIPv6CriteriaActionPriority,
tSapIngressIPv6CriteriaSourceIpAddr,
tSapIngressIPv6CriteriaSourceIpMask,
tSapIngressIPv6CriteriaDestIpAddr,
tSapIngressIPv6CriteriaDestIpMask,
tSapIngressIPv6CriteriaNextHeader,
tSapIngressIPv6CriteriaSourcePortValue1,
tSapIngressIPv6CriteriaSourcePortValue2,
tSapIngressIPv6CriteriaSourcePortOperator,
tSapIngressIPv6CriteriaDestPortValue1,
tSapIngressIPv6CriteriaDestPortValue2,
tSapIngressIPv6CriteriaDestPortOperator,
tSapIngressIPv6CriteriaDSCP,
tSapIngressIPv6CriteriaLastChanged,
tSapIngressIPv6CriteriaTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects for Qos Policies related to IPv6
on Alcatel 7x50 SR series systems release 4.0."
::= { tmnxQosGroups 16 }
tmnxQosQueueV4v0Group OBJECT-GROUP
OBJECTS {
tSharedQueuePolicyRowStatus,
tSharedQueuePolicyDescription,
tSharedQueuePolicyLastChanged,
tSharedQueuePolicyTableLastChanged,
tSharedQueueRowStatus,
tSharedQueuePoolName,
tSharedQueueParent,
tSharedQueueLevel,
tSharedQueueWeight,
tSharedQueueCIRLevel,
tSharedQueueCIRWeight,
tSharedQueueExpedite,
tSharedQueueCIR,
tSharedQueuePIR,
tSharedQueueCBS,
tSharedQueueMBS,
tSharedQueueHiPrioOnly,
tSharedQueueLastChanged,
tSharedQueueIsMultipoint,
tSharedQueueTableLastChanged,
tSharedQueueFCRowStatus,
tSharedQueueFCQueue,
tSharedQueueFCLastChanged,
tSharedQueueFCTableLastChanged,
tSharedQueueFCMCastQueue,
tSharedQueueFCBCastQueue,
tSharedQueueFCUnknownQueue
}
STATUS current
DESCRIPTION
"The group of objects supporting management of QoS queue policies
on Alcatel 7x50 SR series systems release 4.0."
::= { tmnxQosGroups 18 }
tmnxQosSapIngressV4v0Group OBJECT-GROUP
OBJECTS {
tSapIngressRowStatus,
tSapIngressScope,
tSapIngressDescription,
tSapIngressDefaultFC,
tSapIngressDefaultFCPriority,
tSapIngressMatchCriteria,
tSapIngressLastChanged,
tSapIngressTableLastChanged,
tSapIngressQueueRowStatus,
tSapIngressQueueParent,
tSapIngressQueueLevel,
tSapIngressQueueWeight,
tSapIngressQueueCIRLevel,
tSapIngressQueueCIRWeight,
tSapIngressQueueMCast,
tSapIngressQueueExpedite,
tSapIngressQueueCBS,
tSapIngressQueueMBS,
tSapIngressQueueHiPrioOnly,
tSapIngressQueueCIRAdaptation,
tSapIngressQueuePIRAdaptation,
tSapIngressQueueAdminPIR,
tSapIngressQueueAdminCIR,
tSapIngressQueueLastChanged,
tSapIngressQueueMode,
tSapIngressQueueTableLastChanged,
tSapIngressQueuePoliced,
tSapIngressDSCPRowStatus,
tSapIngressDSCPFC,
tSapIngressDSCPPriority,
tSapIngressDSCPLastChanged,
tSapIngressDSCPTableLastChanged,
tSapIngressDot1pRowStatus,
tSapIngressDot1pFC,
tSapIngressDot1pPriority,
tSapIngressDot1pLastChanged,
tSapIngressDot1pTableLastChanged,
tSapIngressIPCriteriaRowStatus,
tSapIngressIPCriteriaDescription,
tSapIngressIPCriteriaActionFC,
tSapIngressIPCriteriaActionPriority,
tSapIngressIPCriteriaSourceIpAddr,
tSapIngressIPCriteriaSourceIpMask,
tSapIngressIPCriteriaDestIpAddr,
tSapIngressIPCriteriaDestIpMask,
tSapIngressIPCriteriaProtocol,
tSapIngressIPCriteriaSourcePortValue1,
tSapIngressIPCriteriaSourcePortValue2,
tSapIngressIPCriteriaSourcePortOperator,
tSapIngressIPCriteriaDestPortValue1,
tSapIngressIPCriteriaDestPortValue2,
tSapIngressIPCriteriaDestPortOperator,
tSapIngressIPCriteriaDSCP,
tSapIngressIPCriteriaFragment,
tSapIngressIPCriteriaLastChanged,
tSapIngressIPCriteriaTableLastChanged,
tSapIngressMacCriteriaRowStatus,
tSapIngressMacCriteriaDescription,
tSapIngressMacCriteriaActionFC,
tSapIngressMacCriteriaActionPriority,
tSapIngressMacCriteriaFrameType,
tSapIngressMacCriteriaSrcMacAddr,
tSapIngressMacCriteriaSrcMacMask,
tSapIngressMacCriteriaDstMacAddr,
tSapIngressMacCriteriaDstMacMask,
tSapIngressMacCriteriaDot1PValue,
tSapIngressMacCriteriaDot1PMask,
tSapIngressMacCriteriaEthernetType,
tSapIngressMacCriteriaDSAP,
tSapIngressMacCriteriaDSAPMask,
tSapIngressMacCriteriaSSAP,
tSapIngressMacCriteriaSSAPMask,
tSapIngressMacCriteriaSnapPid,
tSapIngressMacCriteriaSnapOui,
tSapIngressMacCriteriaLastChanged,
tSapIngressMacCriteriaTableLastChanged,
tSapIngressFCRowStatus,
tSapIngressFCQueue,
tSapIngressFCMCastQueue,
tSapIngressFCBCastQueue,
tSapIngressFCUnknownQueue,
tSapIngressFCLastChanged,
tSapIngressFCInProfRemark,
tSapIngressFCInProfDscp,
tSapIngressFCInProfPrec,
tSapIngressFCOutProfRemark,
tSapIngressFCOutProfDscp,
tSapIngressFCOutProfPrec,
tSapIngressFCProfile,
tSapIngressFCTableLastChanged,
tSapIngressPrecRowStatus,
tSapIngressPrecFC,
tSapIngressPrecFCPriority,
tSapIngressPrecLastChanged,
tSapIngressPrecTableLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of SAP ingress QoS
policies on Alcatel 7x50 SR series systems release 4.0."
::= { tmnxQosGroups 19 }
tmnxQosSchedulerV5v0Group OBJECT-GROUP
OBJECTS {
tSchedulerPolicyRowStatus,
tSchedulerPolicyDescription,
tSchedulerPolicyLastChanged,
tSchedulerPolicyTableLastChanged,
tVirtualSchedulerRowStatus,
tVirtualSchedulerDescription,
tVirtualSchedulerParent,
tVirtualSchedulerLevel,
tVirtualSchedulerWeight,
tVirtualSchedulerCIRLevel,
tVirtualSchedulerCIRWeight,
tVirtualSchedulerPIR,
tVirtualSchedulerCIR,
tVirtualSchedulerSummedCIR,
tVirtualSchedulerLastChanged,
tVirtualSchedulerUsePortParent,
tVirtualSchedulerPortLvl,
tVirtualSchedulerPortWght,
tVirtualSchedulerPortCIRLvl,
tVirtualSchedulerPortCIRWght,
tVirtualSchedulerTableLastChanged,
tPortSchedulerPlcyRowStatus,
tPortSchedulerPlcyDescription,
tPortSchedulerPlcyLastChanged,
tPortSchedulerPlcyMaxRate,
tPortSchedulerPlcyLvl1PIR,
tPortSchedulerPlcyLvl1CIR,
tPortSchedulerPlcyLvl2PIR,
tPortSchedulerPlcyLvl2CIR,
tPortSchedulerPlcyLvl3PIR,
tPortSchedulerPlcyLvl3CIR,
tPortSchedulerPlcyLvl4PIR,
tPortSchedulerPlcyLvl4CIR,
tPortSchedulerPlcyLvl5PIR,
tPortSchedulerPlcyLvl5CIR,
tPortSchedulerPlcyLvl6PIR,
tPortSchedulerPlcyLvl6CIR,
tPortSchedulerPlcyLvl7PIR,
tPortSchedulerPlcyLvl7CIR,
tPortSchedulerPlcyLvl8PIR,
tPortSchedulerPlcyLvl8CIR,
tPortSchedulerPlcyOrphanLvl,
tPortSchedulerPlcyOrphanWeight,
tPortSchedulerPlcyOrphanCIRLvl,
tPortSchedulerPlcyOrphanCIRWght
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Scheduler policies
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 20 }
tmnxQosSapEgressV5v0Group OBJECT-GROUP
OBJECTS {
tSapEgressRowStatus,
tSapEgressScope,
tSapEgressDescription,
tSapEgressLastChanged,
tSapEgressTableLastChanged,
tSapEgressQueueRowStatus,
tSapEgressQueueParent,
tSapEgressQueueLevel,
tSapEgressQueueWeight,
tSapEgressQueueCIRLevel,
tSapEgressQueueCIRWeight,
tSapEgressQueueExpedite,
tSapEgressQueueCBS,
tSapEgressQueueMBS,
tSapEgressQueueHiPrioOnly,
tSapEgressQueueCIRAdaptation,
tSapEgressQueuePIRAdaptation,
tSapEgressQueueAdminPIR,
tSapEgressQueueAdminCIR,
tSapEgressQueueLastChanged,
tSapEgressQueueTableLastChanged,
tSapEgressFCRowStatus,
tSapEgressFCQueue,
tSapEgressFCDot1PValue,
tSapEgressFCLastChanged,
tSapEgressFCTableLastChanged,
tSapEgressQueueUsePortParent,
tSapEgressQueuePortLvl,
tSapEgressQueuePortWght,
tSapEgressQueuePortCIRLvl,
tSapEgressQueuePortCIRWght,
tSapEgressQueuePortAvgOverhead
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of SAP egress QoS
policies on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 21 }
tmnxQosNetworkV5v0Group OBJECT-GROUP
OBJECTS {
tNetworkPolicyRowStatus,
tNetworkPolicyScope,
tNetworkPolicyDescription,
tNetworkPolicyIngressDefaultActionFC,
tNetworkPolicyIngressDefaultActionProfile,
tNetworkPolicyEgressRemark,
tNetworkPolicyLastChanged,
tNetworkPolicyIngressLerUseDscp,
tNetworkPolicyTableLastChanged,
tNetworkIngressDSCPRowStatus,
tNetworkIngressDSCPFC,
tNetworkIngressDSCPProfile,
tNetworkIngressDSCPLastChanged,
tNetworkIngressDSCPTableLastChanged,
tNetworkIngressDot1pRowStatus,
tNetworkIngressDot1pFC,
tNetworkIngressDot1pProfile,
tNetworkIngressDot1pLastChanged,
tNetworkIngressDot1pTableLastChanged,
tNetworkIngressLSPEXPRowStatus,
tNetworkIngressLSPEXPFC,
tNetworkIngressLSPEXPProfile,
tNetworkIngressLSPEXPLastChanged,
tNetworkIngressLSPEXPTableLastChanged,
tNetworkEgressFCDSCPInProfile,
tNetworkEgressFCDSCPOutProfile,
tNetworkEgressFCLspExpInProfile,
tNetworkEgressFCLspExpOutProfile,
tNetworkEgressFCDot1pInProfile,
tNetworkEgressFCDot1pOutProfile,
tNetworkEgressFCLastChanged,
tNetworkEgressFCTableLastChanged,
tNetworkQueuePolicyRowStatus,
tNetworkQueuePolicyDescription,
tNetworkQueuePolicyLastChanged,
tNetworkQueuePolicyTableLastChanged,
tNetworkQueueRowStatus,
tNetworkQueuePoolName,
tNetworkQueueParent,
tNetworkQueueLevel,
tNetworkQueueWeight,
tNetworkQueueCIRLevel,
tNetworkQueueCIRWeight,
tNetworkQueueMCast,
tNetworkQueueExpedite,
tNetworkQueueCIR,
tNetworkQueuePIR,
tNetworkQueueCBS,
tNetworkQueueMBS,
tNetworkQueueHiPrioOnly,
tNetworkQueueLastChanged,
tNetworkQueueUsePortParent,
tNetworkQueuePortLvl,
tNetworkQueuePortWght,
tNetworkQueuePortCIRLvl,
tNetworkQueuePortCIRWght,
tNetworkQueuePortAvgOverhead,
tNetworkQueuePIRAdaptation,
tNetworkQueueCIRAdaptation,
tNetworkQueueTableLastChanged,
tNetworkQueueFCRowStatus,
tNetworkQueueFC,
tNetworkQueueFCMCast,
tNetworkQueueFCLastChanged,
tNetworkQueueFCTableLastChanged
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Network QoS policies
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 22 }
tmnxQosAtmTdpV5v0Group OBJECT-GROUP
OBJECTS {
tAtmTdpSir,
tAtmTdpPir,
tAtmTdpMbs,
tAtmTdpMir,
tAtmTdpShaping,
tAtmTdpServCat,
tAtmTdpLastChanged,
tAtmTdpDescription,
tAtmTdpRowStatus,
tAtmTdpDescrType,
tAtmTdpCdvt,
tAtmTdpPolicing,
tAtmTdpCLPTagging,
tAtmTdpIndexNext,
tAtmTdpsMaxSupported,
tAtmTdpsCurrentlyConfigured,
tAtmTdpTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects for ATM Traffic Descriptor Profiles
on Alcatel 7x50 SR series systems release 5.0."
::= { tmnxQosGroups 24 }
tmnxQosSapIngressV6v0Group OBJECT-GROUP
OBJECTS {
tSapIngressRowStatus,
tSapIngressScope,
tSapIngressDescription,
tSapIngressDefaultFC,
tSapIngressDefaultFCPriority,
tSapIngressMatchCriteria,
tSapIngressLastChanged,
tSapIngressTableLastChanged,
tSapIngressQueueRowStatus,
tSapIngressQueueParent,
tSapIngressQueueLevel,
tSapIngressQueueWeight,
tSapIngressQueueCIRLevel,
tSapIngressQueueCIRWeight,
tSapIngressQueueMCast,
tSapIngressQueueExpedite,
tSapIngressQueueCBS,
tSapIngressQueueMBS,
tSapIngressQueueHiPrioOnly,
tSapIngressQueueCIRAdaptation,
tSapIngressQueuePIRAdaptation,
tSapIngressQueueAdminPIR,
tSapIngressQueueAdminCIR,
tSapIngressQueueLastChanged,
tSapIngressQueueMode,
tSapIngressQueuePoolName,
tSapIngressQueueTableLastChanged,
tSapIngressQueuePoliced,
tSapIngressDSCPRowStatus,
tSapIngressDSCPFC,
tSapIngressDSCPPriority,
tSapIngressDSCPLastChanged,
tSapIngressDSCPTableLastChanged,
tSapIngressDot1pRowStatus,
tSapIngressDot1pFC,
tSapIngressDot1pPriority,
tSapIngressDot1pLastChanged,
tSapIngressDot1pTableLastChanged,
tSapIngressIPCriteriaRowStatus,
tSapIngressIPCriteriaDescription,
tSapIngressIPCriteriaActionFC,
tSapIngressIPCriteriaActionPriority,
tSapIngressIPCriteriaSourceIpAddr,
tSapIngressIPCriteriaSourceIpMask,
tSapIngressIPCriteriaDestIpAddr,
tSapIngressIPCriteriaDestIpMask,
tSapIngressIPCriteriaProtocol,
tSapIngressIPCriteriaSourcePortValue1,
tSapIngressIPCriteriaSourcePortValue2,
tSapIngressIPCriteriaSourcePortOperator,
tSapIngressIPCriteriaDestPortValue1,
tSapIngressIPCriteriaDestPortValue2,
tSapIngressIPCriteriaDestPortOperator,
tSapIngressIPCriteriaDSCP,
tSapIngressIPCriteriaFragment,
tSapIngressIPCriteriaLastChanged,
tSapIngressIPCriteriaTableLastChanged,
tSapIngressMacCriteriaRowStatus,
tSapIngressMacCriteriaDescription,
tSapIngressMacCriteriaActionFC,
tSapIngressMacCriteriaActionPriority,
tSapIngressMacCriteriaFrameType,
tSapIngressMacCriteriaSrcMacAddr,
tSapIngressMacCriteriaSrcMacMask,
tSapIngressMacCriteriaDstMacAddr,
tSapIngressMacCriteriaDstMacMask,
tSapIngressMacCriteriaDot1PValue,
tSapIngressMacCriteriaDot1PMask,
tSapIngressMacCriteriaEthernetType,
tSapIngressMacCriteriaDSAP,
tSapIngressMacCriteriaDSAPMask,
tSapIngressMacCriteriaSSAP,
tSapIngressMacCriteriaSSAPMask,
tSapIngressMacCriteriaSnapPid,
tSapIngressMacCriteriaSnapOui,
tSapIngressMacCriteriaLastChanged,
tSapIngressMacCriteriaTableLastChanged,
tSapIngressFCRowStatus,
tSapIngressFCQueue,
tSapIngressFCMCastQueue,
tSapIngressFCBCastQueue,
tSapIngressFCUnknownQueue,
tSapIngressFCLastChanged,
tSapIngressFCInProfRemark,
tSapIngressFCInProfDscp,
tSapIngressFCInProfPrec,
tSapIngressFCOutProfRemark,
tSapIngressFCOutProfDscp,
tSapIngressFCOutProfPrec,
tSapIngressFCProfile,
tSapIngressFCTableLastChanged,
tSapIngressPrecRowStatus,
tSapIngressPrecFC,
tSapIngressPrecFCPriority,
tSapIngressPrecLastChanged,
tSapIngressPrecTableLastChanged,
tSapIngressFCDE1OutOfProfile
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SAP ingress QoS
policies on Alcatel 7x50 SR series systems release 6.0."
::= { tmnxQosGroups 25 }
tmnxQosSapEgressV6v0Group OBJECT-GROUP
OBJECTS {
tSapEgressRowStatus,
tSapEgressScope,
tSapEgressDescription,
tSapEgressLastChanged,
tSapEgressTableLastChanged,
tSapEgressQueueRowStatus,
tSapEgressQueueParent,
tSapEgressQueueLevel,
tSapEgressQueueWeight,
tSapEgressQueueCIRLevel,
tSapEgressQueueCIRWeight,
tSapEgressQueueExpedite,
tSapEgressQueueCBS,
tSapEgressQueueMBS,
tSapEgressQueueHiPrioOnly,
tSapEgressQueueCIRAdaptation,
tSapEgressQueuePIRAdaptation,
tSapEgressQueueAdminPIR,
tSapEgressQueueAdminCIR,
tSapEgressQueueLastChanged,
tSapEgressQueueTableLastChanged,
tSapEgressFCRowStatus,
tSapEgressFCQueue,
tSapEgressFCLastChanged,
tSapEgressFCTableLastChanged,
tSapEgressFCDot1PInProfile,
tSapEgressFCDot1POutProfile,
tSapEgressFCForceDEValue,
tSapEgressFCDEMark,
tSapEgressFCInProfDscp,
tSapEgressFCOutProfDscp,
tSapEgressFCInProfPrec,
tSapEgressFCOutProfPrec,
tSapEgressQueueUsePortParent,
tSapEgressQueuePortLvl,
tSapEgressQueuePortWght,
tSapEgressQueuePortCIRLvl,
tSapEgressQueuePortCIRWght,
tSapEgressQueuePortAvgOverhead,
tSapEgressQueuePoolName
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SAP egress QoS
policies on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 26 }
tmnxQosNetworkV6v0Group OBJECT-GROUP
OBJECTS {
tNetworkPolicyRowStatus,
tNetworkPolicyScope,
tNetworkPolicyDescription,
tNetworkPolicyIngressDefaultActionFC,
tNetworkPolicyIngressDefaultActionProfile,
tNetworkPolicyEgressRemark,
tNetworkPolicyLastChanged,
tNetworkPolicyIngressLerUseDscp,
tNetworkPolicyTableLastChanged,
tNetworkIngressDSCPRowStatus,
tNetworkIngressDSCPFC,
tNetworkIngressDSCPProfile,
tNetworkIngressDSCPLastChanged,
tNetworkIngressDSCPTableLastChanged,
tNetworkIngressDot1pRowStatus,
tNetworkIngressDot1pFC,
tNetworkIngressDot1pProfile,
tNetworkIngressDot1pLastChanged,
tNetworkIngressDot1pTableLastChanged,
tNetworkIngressLSPEXPRowStatus,
tNetworkIngressLSPEXPFC,
tNetworkIngressLSPEXPProfile,
tNetworkIngressLSPEXPLastChanged,
tNetworkIngressLSPEXPTableLastChanged,
tNetworkEgressFCDSCPInProfile,
tNetworkEgressFCDSCPOutProfile,
tNetworkEgressFCLspExpInProfile,
tNetworkEgressFCLspExpOutProfile,
tNetworkEgressFCDot1pInProfile,
tNetworkEgressFCDot1pOutProfile,
tNetworkEgressFCLastChanged,
tNetworkEgressFCForceDEValue,
tNetworkEgressFCDEMark,
tNetworkEgressFCTableLastChanged,
tNetworkQueuePolicyRowStatus,
tNetworkQueuePolicyDescription,
tNetworkQueuePolicyLastChanged,
tNetworkQueuePolicyTableLastChanged,
tNetworkQueueRowStatus,
tNetworkQueuePoolName,
tNetworkQueueParent,
tNetworkQueueLevel,
tNetworkQueueWeight,
tNetworkQueueCIRLevel,
tNetworkQueueCIRWeight,
tNetworkQueueMCast,
tNetworkQueueExpedite,
tNetworkQueueCIR,
tNetworkQueuePIR,
tNetworkQueueCBS,
tNetworkQueueMBS,
tNetworkQueueHiPrioOnly,
tNetworkQueueLastChanged,
tNetworkQueueUsePortParent,
tNetworkQueuePortLvl,
tNetworkQueuePortWght,
tNetworkQueuePortCIRLvl,
tNetworkQueuePortCIRWght,
tNetworkQueuePortAvgOverhead,
tNetworkQueuePIRAdaptation,
tNetworkQueueCIRAdaptation,
tNetworkQueueTableLastChanged,
tNetworkQueueFCRowStatus,
tNetworkQueueFC,
tNetworkQueueFCMCast,
tNetworkQueueFCLastChanged,
tNetworkQueueFCTableLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Network QoS policies
on Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 27 }
tmnxQosFrameBasedV6v0Group OBJECT-GROUP
OBJECTS {
tSchedulerPolicyFrameBasedAccnt
}
STATUS current
DESCRIPTION
"The group of objects supporting management of frame-based queue
accounting on Alcatel 7x50 SR series systems release 6.0."
::= { tmnxQosGroups 28 }
tmnxQosObsoletedV6v0Group OBJECT-GROUP
OBJECTS {
tSapEgressFCDot1PValue
}
STATUS current
DESCRIPTION
"The group of obsolete objects for the QoS on
Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 29 }
tmnxQosNamedPoolPolicyV6v0Group OBJECT-GROUP
OBJECTS {
tNamedPoolPolicyTableLastChanged,
tNamedPoolPolicyRowStatus,
tNamedPoolPolicyLastChanged,
tNamedPoolPolicyDescription,
tNamedPoolPolicyQ1DefaultWeight,
tNamedPoolPolicyQ1MdaWeight,
tNamedPoolPolicyQ1PortWeight,
tQ1NamedPoolTableLastChanged,
tQ1NamedPoolRowStatus,
tQ1NamedPoolLastChanged,
tQ1NamedPoolDescription,
tQ1NamedPoolNetworkAllocWeight,
tQ1NamedPoolAccessAllocWeight,
tQ1NamedPoolSlopePolicy,
tQ1NamedPoolReservedCbs
}
STATUS current
DESCRIPTION
"The group of objects for the named pool policy on
Alcatel 7x50 SR series systems."
::= { tmnxQosGroups 30 }
--
-- tmnxQosNotificationsGroup NOTIFICATION-GROUP
-- NOTIFICATIONS {
-- xxxx
-- }
-- STATUS current
-- DESCRIPTION
-- "the group of notifications providing for xxxx"
-- ::= { tmnxQosGroups X }
--
END