mibs/nokia/aos7/ALCATEL-IND1-TIMETRA-SAP-MIB
ALCATEL-IND1-TIMETRA-SAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Gauge32,
Integer32, Unsigned32, IpAddress,
Counter64, Counter32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
DisplayString,
RowStatus, MacAddress, TimeStamp,
TruthValue FROM SNMPv2-TC
InterfaceIndexOrZero FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
AtmTrafficDescrParamIndex FROM ATM-TC-MIB
ServiceAdminStatus,
TmnxPortID, TmnxEncapVal, TmnxServId, TmnxCustId, TNamedItem,
TIngressQueueId, TEgressQueueId, TNamedItemOrEmpty, TPortSchedulerPIR,
TmnxActionType, TmnxOperState, TmnxIgmpVersion,
TCpmProtPolicyID, TCIRRate, TPIRRate, TmnxEnabledDisabled, TItemDescription,
TPolicyStatementNameOrEmpty, TSapIngressPolicyID, TSapEgressPolicyID
FROM ALCATEL-IND1-TIMETRA-TC-MIB
tmnxServObjs, tmnxServConformance, tmnxServNotifications,
custId, svcId, svcVpnId, tlsMstiInstanceId, tstpTraps,
tmnxOtherBridgeId, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId,
protectedMacForNotify, tlsDhcpLseStateNewCiAddr,
tlsDhcpLseStateNewChAddr, tlsDHCPClientLease, tlsDhcpLseStateOldCiAddr,
tlsDhcpLseStateOldChAddr, hostConnectivityCiAddrType,
hostConnectivityCiAddr, hostConnectivityChAddr,
staticHostDynamicMacIpAddress, staticHostDynamicMacConflict,
svcTlsMacMoveMaxRate, svcDhcpProxyError,
svcDhcpCoAError, svcDhcpSubAuthError,
tlsDhcpPacketProblem, svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr, svcDhcpClientLease,
svcDhcpLseStateOldCiAddr, svcDhcpLseStateOldChAddr, svcDhcpPacketProblem,
svcDhcpLseStatePopulateError,
ServObjName, ServObjDesc, ServType, VpnId,
TlsLimitMacMoveLevel, TlsLimitMacMove, StpExceptionCondition,
BridgeId, TSapIngQueueId, TSapEgrQueueId, TStpPortState, StpPortRole,
StpProtocol, MvplsPruneState, TQosQueueAttribute, TVirtSchedAttribute,
MstiInstanceIdOrZero, TdmOptionsCasTrunkFraming, CemSapReportAlarm,
CemSapEcid, L2ptProtocols, ConfigStatus FROM ALCATEL-IND1-TIMETRA-SERV-MIB
timetraSRMIBModules FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB
TBurstSize, TBurstPercentOrDefault,
TAdaptationRule,
tVirtualSchedulerName, tSchedulerPolicyName FROM ALCATEL-IND1-TIMETRA-QOS-MIB
TFilterID FROM ALCATEL-IND1-TIMETRA-FILTER-MIB;
timetraSvcSapMIBModule MODULE-IDENTITY
LAST-UPDATED "0710010000Z"
ORGANIZATION "Alcatel"
CONTACT-INFO
"Alcatel 7x50 Support
Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision
the various services of the Alcatel 7x50 SR system.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction
of this document is authorized on the condition that the
foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's
proprietary intellectual property. Alcatel retains all title
and ownership in the Specification, including any revisions.
Alcatel grants all interested parties a non-exclusive license
to use and distribute an unmodified copy of this Specification
in connection with management of Alcatel products, and without
fee, provided this copyright notice and license appear on all
copies.
This Specification is supplied `as is', and Alcatel makes no
warranty, either express or implied, as to the use, operation,
condition, or performance of the Specification."
--
-- Revision History
--
REVISION "0710010000Z"
DESCRIPTION "Rev 1.0 01 OCT 2007 00:00
1.0 release of the TIMETRA-SAP-MIB from TIMETRA-SERV-MIB."
::= { timetraSRMIBModules 55 }
-- --------------------------------------------------------------------
-- ALCATEL-IND1-TIMETRA-SAP-MIB organisation
-- --------------------------------------------------------------------
tmnxSapObjs OBJECT IDENTIFIER ::= { tmnxServObjs 3 }
tmnxSapNotifyObjs OBJECT IDENTIFIER ::= { tmnxSapObjs 100 }
tmnxSapConformance OBJECT IDENTIFIER ::= { tmnxServConformance 3 }
sapTrapsPrefix OBJECT IDENTIFIER ::= { tmnxServNotifications 3 }
sapTraps OBJECT IDENTIFIER ::= { sapTrapsPrefix 0 }
-- --------------------------------------------------------------------
-- tmnxSapObjs group
-- --------------------------------------------------------------------
sapNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of SAPs configured in this
device."
::= { tmnxSapObjs 1 }
-- ----------------------------------
-- Base SAP Table
-- ----------------------------------
sapBaseInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic SAP information."
::= { tmnxSapObjs 2 }
sapBaseInfoEntry OBJECT-TYPE
SYNTAX SapBaseInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapBaseInfoTable 1 }
SapBaseInfoEntry ::=
SEQUENCE {
sapPortId TmnxPortID,
sapEncapValue TmnxEncapVal,
sapRowStatus RowStatus,
sapType ServType,
sapDescription ServObjDesc,
sapAdminStatus ServiceAdminStatus,
sapOperStatus INTEGER,
sapIngressQosPolicyId TSapIngressPolicyID,
sapIngressMacFilterId TFilterID,
sapIngressIpFilterId TFilterID,
sapEgressQosPolicyId TSapEgressPolicyID,
sapEgressMacFilterId TFilterID,
sapEgressIpFilterId TFilterID,
sapMirrorStatus INTEGER,
sapIesIfIndex InterfaceIndexOrZero,
sapLastMgmtChange TimeStamp,
sapCollectAcctStats TruthValue,
sapAccountingPolicyId Unsigned32,
sapVpnId VpnId,
sapCustId TmnxCustId,
sapCustMultSvcSite ServObjName,
sapIngressQosSchedulerPolicy ServObjName,
sapEgressQosSchedulerPolicy ServObjName,
sapSplitHorizonGrp ServObjName,
sapIngressSharedQueuePolicy ServObjName,
sapIngressMatchQinQDot1PBits INTEGER,
sapOperFlags BITS,
sapLastStatusChange TimeStamp,
sapAntiSpoofing INTEGER,
sapIngressIpv6FilterId TFilterID,
sapEgressIpv6FilterId TFilterID,
sapTodSuite TNamedItemOrEmpty,
sapIngUseMultipointShared TruthValue,
sapEgressQinQMarkTopOnly TruthValue,
sapEgressAggRateLimit TPortSchedulerPIR,
sapEndPoint ServObjName,
sapIngressVlanTranslation INTEGER,
sapIngressVlanTranslationId Integer32,
sapSubType INTEGER,
sapCpmProtPolicyId TCpmProtPolicyID,
sapCpmProtMonitorMac TruthValue,
sapEgressFrameBasedAccounting TruthValue
}
sapPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ID of the access port where this SAP
is defined."
::= { sapBaseInfoEntry 1 }
sapEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the label used to identify this
SAP on the access port specified by sapPortId."
::= { sapBaseInfoEntry 2 }
sapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'."
::= { sapBaseInfoEntry 3 }
sapType OBJECT-TYPE
SYNTAX ServType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of service where
this SAP is defined."
::= { sapBaseInfoEntry 4 }
sapDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Generic information about this SAP."
DEFVAL { "" }
::= { sapBaseInfoEntry 5 }
sapAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The desired state of this SAP."
DEFVAL { down }
::= { sapBaseInfoEntry 6 }
sapOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
ingressQosMismatch (3),
egressQosMismatch (4),
portMtuTooSmall (5),
svcAdminDown (6),
iesIfAdminDown (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapOperStatus indicates the
operating state of this SAP."
::= { sapBaseInfoEntry 7 }
sapIngressQosPolicyId OBJECT-TYPE
SYNTAX TSapIngressPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapIngressQosPolicyId specifies
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified.
The value 0 is needed for mirror SAPs that
cannot have a qos policy assigned."
DEFVAL { 1 }
::= { sapBaseInfoEntry 8 }
sapIngressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapIngressMacFilterId specifies
the row index in the tMacFilterTable corresponding to this
ingress filter, or zero if no filter is specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 9 }
sapIngressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapIngressIpFilterId specifies the
row index in the tIPFilterTable corresponding to this
ingress filter, or zero if no filter is specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 10 }
sapEgressQosPolicyId OBJECT-TYPE
SYNTAX TSapEgressPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tSapEgressTable
corresponding to this egress QoS policy,
or one if no policy is specified."
DEFVAL { 1 }
::= { sapBaseInfoEntry 11 }
sapEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tMacFilterTable
corresponding to this egress filter,
or zero if no filter is specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 12 }
sapEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row index in the tIPFilterTable
corresponding to this egress filter,
or zero if no filter is specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 13 }
sapMirrorStatus OBJECT-TYPE
SYNTAX INTEGER {
ingress (1),
egress (2),
ingressAndEgress (3),
disabled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies whether traffic
mirroring has been enabled on this SAP."
::= { sapBaseInfoEntry 14 }
sapIesIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of sapType is 'ies' this
object specifies the index of the IES interface
where this SAP is defined. The value of this object
can be set only when the row is created and cannot
be changed while the row status is 'active'. This
object is otherwise not significant and should have
the value zero."
::= { sapBaseInfoEntry 15 }
sapLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent management-initiated change to
this SAP."
::= { sapBaseInfoEntry 16 }
sapCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of this object is 'true' the agent
collects accounting statistics on this SAP."
DEFVAL { false }
::= { sapBaseInfoEntry 17 }
sapAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the policy to use to collect
accounting statistics on this SAP. The value zero
indicates that the agent should use the default
accounting policy, if one exists."
DEFVAL { 0 }
::= { sapBaseInfoEntry 18 }
sapVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VPN ID of the associated service."
::= { sapBaseInfoEntry 19 }
sapCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID of the associated service."
::= { sapBaseInfoEntry 20 }
sapCustMultSvcSite OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of this object, when not null, indicates
the Multi-Service Site this SAP is a member of. This
information is used to configure the ingress and
egress QoS schedulers for this SAP."
DEFVAL { "" }
::= { sapBaseInfoEntry 21 }
sapIngressQosSchedulerPolicy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object can be set only when sapCustMultSvcSite
is null. It indicates the ingress QoS scheduler for
this SAP."
DEFVAL { "" }
::= { sapBaseInfoEntry 22 }
sapEgressQosSchedulerPolicy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object can be set only when sapCustMultSvcSite
is null. It indicates the egress QoS scheduler for
this SAP."
DEFVAL { "" }
::= { sapBaseInfoEntry 23 }
sapSplitHorizonGrp OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies the name of the split-horizon
group where the SAP belongs to. This object can be
set only at the time the row is created. Per default
a SAP does not belong to any split-horizon group. The
name specified must correspond to an existing split-
horizon group in the TLS service where this SAP is
defined."
DEFVAL { "" }
::= { sapBaseInfoEntry 24 }
sapIngressSharedQueuePolicy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the ingress shared queue policy
used by this SAP. When the value of this object is null
it means that the SAP will use individual ingress QoS
queues, instead of the shared ones."
DEFVAL { "" }
::= { sapBaseInfoEntry 25 }
sapIngressMatchQinQDot1PBits OBJECT-TYPE
SYNTAX INTEGER {
default (1),
top (2),
bottom (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object applies only to SAP's defined on a port
configured for qinq service encapsulation. It indicates
which 802.1P bits will be used to match a QoS or a MAC
filter policy when a double-tagged frame is received on
this SAP."
DEFVAL { default }
::= { sapBaseInfoEntry 26 }
sapOperFlags OBJECT-TYPE
SYNTAX BITS {
sapAdminDown (0), -- SAP is admin down
svcAdminDown (1), -- Service is admin down
iesIfAdminDown (2), -- IP interface is admin down
-- (IES and VPRN only)
portOperDown (3), -- Access port is oper down
portMtuTooSmall (4), -- Access port's MTU is less
-- than Service MTU
l2OperDown (5), -- L2 PVC/PVP is oper down
-- (FR and ATM only)
ingressQosMismatch (6), -- Mismatch between ingress
-- QoS and Scheduler policies
egressQosMismatch (7), -- Mismatch between egress
-- QoS and Scheduler policies
relearnLimitExceeded (8), -- MAC relearn limit was
-- exceeded (TLS only)
recProtSrcMac (9), -- Received a packet with a
-- protected source MAC
-- (TLS only)
subIfAdminDown (10), -- Subscriber interface is
-- admin down (group-interface
-- SAP only)
sapIpipeNoCeIpAddr (11), -- CE IP Address not
-- configured for Ipipe SAP
-- (IPIPE SAP only)
sapTodResourceUnavail (12),-- SAP with ToD had
-- insufficient resources
-- at boot time and got
-- default policies.
sapTodMssResourceUnavail (13), -- MSS of this SAP uses
-- ToD and due to
-- insufficient resources
-- at boot time got
-- default scheduler
-- policies.
sapParamMismatch (14), -- Service specific local
-- parameter mismatch
sapCemNoEcidOrMacAddr (15), -- ECID or MAC address not
-- configured (CEM SAP
-- only)
sapStandbyForMcRing (16), -- mc-ring keeps this SAP
-- standby for the
-- corresponding SAP on
-- peer
sapSvcMtuTooSmall (17), -- Service MTU is less
-- than the SAP payload
ingressNamedPoolMismatch (18), -- Invalid named-pool
-- on the ingress side
egressNamedPoolMismatch (19), -- Invalid named-pool
-- on the egress side
ipMirrorNoMacAddr (20), -- No MAC Address configured
-- for the ip-mirror
sapEpipeNoRingNode (21) -- No TIMETRA-MC-REDUNDANCY-MIB
-- ::tmnxMcEpipeSapEntry object
-- configured for Epipe SAP
-- (EPIPE SAP only)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies all the conditions that
affect the operating status of this SAP."
::= { sapBaseInfoEntry 27 }
sapLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime at the time of the
most recent operating status change to this
SAP."
::= { sapBaseInfoEntry 28 }
sapAntiSpoofing OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
sourceIpAddr (1),
sourceMacAddr (2),
sourceIpAndMacAddr (3),
nextHopIpAndMacAddr (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapAntiSpoofing specifies
the type of anti-spoof filtering applicable on this SAP.
'nextHopIpAndMacAddr (4)' is not supported on SR-1, where
the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'."
DEFVAL { disabled }
::= { sapBaseInfoEntry 29 }
sapIngressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapIngressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this ingress ipv6 filter, or zero if no ipv6 filter is
specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 30 }
sapEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapEgressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this egress ipv6 filter, or zero if no ipv6 filter is
specified."
DEFVAL { 0 }
::= { sapBaseInfoEntry 31 }
sapTodSuite OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapTodSuite specifies the Time of
Day (ToD) suite to be applied on this SAP.
An empty string indicates that no ToD suite is applied
on this SAP.
A set request will only be allowed, if the indicated suite
is defined in TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable."
DEFVAL { ''H }
::= { sapBaseInfoEntry 32 }
sapIngUseMultipointShared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the value of sapIngressSharedQueuePolicy is not null,
the value of the object sapIngUseMultipointShared
specifies whether this SAP uses the multipoint-shared
queues of the shared policy."
DEFVAL { false }
::= { sapBaseInfoEntry 33 }
sapEgressQinQMarkTopOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When the encapsulation type of the access port where
this SAP is defined is qinq, the value of the object
sapEgressQinQMarkTopOnly specifies which P-bits to mark
during packet egress. When the value is false both set
of P-bits are marked. When the value is true, only the
P-bits in the top Q-tag are marked."
DEFVAL { false }
::= { sapBaseInfoEntry 34 }
sapEgressAggRateLimit OBJECT-TYPE
SYNTAX TPortSchedulerPIR
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapEgressAggRateLimit
specifies the maximum total rate of all egress queues for
this SAP. The value '-1' means that there
is no limit."
DEFVAL { -1 }
::= { sapBaseInfoEntry 35 }
sapEndPoint OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapEndPoint specifies the service
endpoint to which this SAP is attached. The svcId of the
SAP MUST match the svcId of the service endpoint."
DEFVAL { "" }
::= { sapBaseInfoEntry 36 }
sapIngressVlanTranslation OBJECT-TYPE
SYNTAX INTEGER {
none (1),
vlanId (2),
copyOuter (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngressVlanTranslation specifies the
desired Ingress Vlan Translation.
A value of 'vlanId' specifies that the value of
sapIngressVlanTranslationId is to be used to overwrite
the preserved VLAN id in the packet.
A value of 'copyOuter' specifies that the outer VLAN
id should be used to overwrite the preserved VLAN id in
the packet.
An 'inconsistentValue' error is returned when an attempt
is made to set the value of sapIngressVlanTranslation
to 'vlanId' and sapIngressVlanTranslationId is
set to '-1'."
DEFVAL { none }
::= { sapBaseInfoEntry 37 }
sapIngressVlanTranslationId OBJECT-TYPE
SYNTAX Integer32 (-1|0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngressVlanTranslationId specifies the
VLAN id to be used to overwrite the preserved VLAN id
in the packet.
An 'inconsistentValue' error is returned when an
attempt is made to set the value of
sapIngressVlanTranslationId to other than '-1' and
sapIngressVlanTranslation is not set to 'vlanId'."
DEFVAL { -1 }
::= { sapBaseInfoEntry 38 }
sapSubType OBJECT-TYPE
SYNTAX INTEGER {
regular (0),
capture (1),
managed (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapSubType indicates the
sub-type for this SAP.
A value of 'regular' indicates a standard SAP.
A value of 'capture' specifies a capturing SAP
in which triggering packets will be sent to the CPM.
Non-triggering packets captured by the 'capture' SAP
will be dropped.
A value of 'managed' indicates a managed SAP which
was created dynamically after receiving triggering
packets on a SAP with a sapSubType value of
'capture'. Entries with a value of 'managed'
are not user editable and are not maintained
in the configuration file.
Whereas any of the three values may be returned in
in response to an SNMP GET request, only two values
may be specified in an SNMP SET request: 'regular'
and 'capture'. An attempt to specify a value
of 'managed' in an SNMP SET request will fail
with an error of 'wrongValue'.
The value of this object cannot be changed after creation."
DEFVAL { regular }
::= { sapBaseInfoEntry 39 }
sapCpmProtPolicyId OBJECT-TYPE
SYNTAX TCpmProtPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sapCpmProtPolicyId associates a CPM Protection policy
with a SAP.
A value of zero (0) specifies that no CPM Protection policy is
associated with this SAP.
A value of one (1) specifies that the default CPM Protection policy is
associated with this SAP.
If no value for sapCpmProtPolicyId is specified when the
sapBaseInfoEntry is created, the system assigns a default value
as follows: if the system creates a corresponding entry
in the sapSubMgmtInfoTable, the default value is 'one'; otherwise,
the default value is 'zero'. This means that all SAP's that
support Enhanced Subscriber Management get a default value of 'one'.
If a SAP would get a default value of 'one', it is not
allowed to set the value of sapCpmProtPolicyId to 'zero'.
If a SAP would get a default value of 'zero', it is not
allowed to modify the value of sapCpmProtPolicyId.
This object is not supported on SR-1 and ESS-1, where the
value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'."
::= { sapBaseInfoEntry 40 }
sapCpmProtMonitorMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sapCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied.
If the value of sapCpmProtMonitorMac is 'true', the per-source rate limit
must be applied.
If the value of sapCpmProtPolicyId is equal to zero (0), the value of
sapCpmProtMonitorMac is irrelevant and will be ignored.
This object is not supported on SR-1 and ESS-1, where the
value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'."
DEFVAL { false }
::= { sapBaseInfoEntry 41 }
sapEgressFrameBasedAccounting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sapEgressFrameBasedAccounting specifies whether
to use frame-based accounting when evaluating
sapEgressAggRateLimit for all egress queues for this SAP.
If the value is 'false', the default packet-based accounting
method will be used."
DEFVAL { false }
::= { sapBaseInfoEntry 42 }
-- -------------------------------------
-- TLS SAP Table
-- -------------------------------------
sapTlsInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains TLS SAP information."
::= { tmnxSapObjs 3 }
sapTlsInfoEntry OBJECT-TYPE
SYNTAX SapTlsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TLS specific information about a SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapTlsInfoTable 1 }
SapTlsInfoEntry ::=
SEQUENCE {
sapTlsStpAdminStatus TmnxEnabledDisabled,
sapTlsStpPriority INTEGER,
sapTlsStpPortNum INTEGER,
sapTlsStpPathCost INTEGER,
sapTlsStpRapidStart TmnxEnabledDisabled,
sapTlsStpBpduEncap INTEGER,
sapTlsStpPortState TStpPortState,
sapTlsStpDesignatedBridge BridgeId,
sapTlsStpDesignatedPort Integer32,
sapTlsStpForwardTransitions Gauge32,
sapTlsStpInConfigBpdus Gauge32,
sapTlsStpInTcnBpdus Gauge32,
sapTlsStpInBadBpdus Gauge32,
sapTlsStpOutConfigBpdus Gauge32,
sapTlsStpOutTcnBpdus Gauge32,
sapTlsStpOperBpduEncap INTEGER,
sapTlsVpnId VpnId,
sapTlsCustId TmnxCustId,
sapTlsMacAddressLimit Integer32,
sapTlsNumMacAddresses Integer32,
sapTlsNumStaticMacAddresses Integer32,
sapTlsMacLearning TmnxEnabledDisabled,
sapTlsMacAgeing TmnxEnabledDisabled,
sapTlsStpOperEdge TruthValue,
sapTlsStpAdminPointToPoint INTEGER,
sapTlsStpPortRole StpPortRole,
sapTlsStpAutoEdge TmnxEnabledDisabled,
sapTlsStpOperProtocol StpProtocol,
sapTlsStpInRstBpdus Gauge32,
sapTlsStpOutRstBpdus Gauge32,
sapTlsLimitMacMove TlsLimitMacMove,
sapTlsDhcpSnooping TmnxEnabledDisabled,
sapTlsMacPinning TmnxEnabledDisabled,
sapTlsDiscardUnknownSource TmnxEnabledDisabled,
sapTlsMvplsPruneState MvplsPruneState,
sapTlsMvplsMgmtService TmnxServId,
sapTlsMvplsMgmtPortId TmnxPortID,
sapTlsMvplsMgmtEncapValue TmnxEncapVal,
sapTlsArpReplyAgent INTEGER,
sapTlsStpException StpExceptionCondition,
sapTlsAuthenticationPolicy TPolicyStatementNameOrEmpty,
sapTlsL2ptTermination TmnxEnabledDisabled,
sapTlsBpduTranslation INTEGER,
sapTlsStpRootGuard TruthValue,
sapTlsStpInsideRegion TruthValue,
sapTlsEgressMcastGroup TNamedItemOrEmpty,
sapTlsStpInMstBpdus Gauge32,
sapTlsStpOutMstBpdus Gauge32,
sapTlsRestProtSrcMac TruthValue,
sapTlsRestUnprotDstMac TruthValue,
sapTlsStpRxdDesigBridge BridgeId,
sapTlsStpRootGuardViolation TruthValue,
sapTlsShcvAction INTEGER,
sapTlsShcvSrcIp IpAddress,
sapTlsShcvSrcMac MacAddress,
sapTlsShcvInterval Unsigned32,
sapTlsMvplsMgmtMsti MstiInstanceIdOrZero,
sapTlsMacMoveNextUpTime Unsigned32,
sapTlsMacMoveRateExcdLeft Unsigned32,
sapTlsRestProtSrcMacAction INTEGER,
sapTlsL2ptForceBoundary TruthValue,
sapTlsLimitMacMoveLevel TlsLimitMacMoveLevel,
sapTlsBpduTransOper INTEGER,
sapTlsDefMsapPolicy TPolicyStatementNameOrEmpty,
sapTlsL2ptProtocols L2ptProtocols,
sapTlsL2ptForceProtocols L2ptProtocols,
sapTlsPppoeMsapTrigger TruthValue,
sapTlsDhcpMsapTrigger TruthValue,
sapTlsMrpJoinTime Unsigned32,
sapTlsMrpLeaveTime Unsigned32,
sapTlsMrpLeaveAllTime Unsigned32,
sapTlsMrpPeriodicTime Unsigned32,
sapTlsMrpPeriodicEnabled TruthValue
}
sapTlsStpAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpAdminStatus specifies
whether this SAP participates in the TLS's Spanning Tree
Protocol."
DEFVAL { enabled }
::= { sapTlsInfoEntry 1 }
sapTlsStpPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP. As only the most significant 4
bits of the value are used, the actual value of this object
is limited to multiples of 16: e.g. the agent rounds down
the value to one of: 0, 16, 32, .. , 224, 240."
DEFVAL { 128 }
::= { sapTlsInfoEntry 2 }
sapTlsStpPortNum OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpPortNum specifies the
value of the port number field which is contained in the
least significant 12 bits of the 16-bit Port ID associated
with this SAP. Values in the range 2048..4094 are
automatically assigned by the agent when the SAP is
created or when the value of this object is set to zero
via management. Values in the range 1..2047 can be set
via management, to allow this object to have a
deterministic value across system reboots."
::= { sapTlsInfoEntry 3 }
sapTlsStpPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port."
DEFVAL { 10 }
::= { sapTlsInfoEntry 4 }
sapTlsStpRapidStart OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpRapidStart specifies
whether Rapid Start is enabled on this SAP. When the value
is 'enabled' the Spanning Tree Protocol state transitions
on this SAP are driven by the value of the 'HelloTime'
instead of the value of 'ForwardDelay', thus allowing a
faster transition into the forwarding state. This
parameter is also referred to as 'adminEdge'. "
DEFVAL { disabled }
::= { sapTlsInfoEntry 5 }
sapTlsStpBpduEncap OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
dot1d (2),
pvst (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpBpduEncap specifies the
type of encapsulation used on BPDUs sent out and received
on this SAP."
DEFVAL { dynamic }
::= { sapTlsInfoEntry 6 }
sapTlsStpPortState OBJECT-TYPE
SYNTAX TStpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge has
detected a port that is malfunctioning it will
place that port into the 'broken' state."
::= { sapTlsInfoEntry 7 }
sapTlsStpDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment."
::= { sapTlsInfoEntry 8 }
sapTlsStpDesignatedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment."
::= { sapTlsInfoEntry 9 }
sapTlsStpForwardTransitions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpForwardTransitions
indicates the number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { sapTlsInfoEntry 10 }
sapTlsStpInConfigBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpInConfigBpdus indicates
the number of Configuration BPDUs received on this SAP."
::= { sapTlsInfoEntry 11 }
sapTlsStpInTcnBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpInTcnBpdus indicates the
number of Topology Change Notification BPDUs received on
this SAP."
::= { sapTlsInfoEntry 12 }
sapTlsStpInBadBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the number of bad
BPDUs received on this SAP."
::= { sapTlsInfoEntry 13 }
sapTlsStpOutConfigBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpOutConfigBpdus indicates
the number of Configuration BPDUs sent out this SAP."
::= { sapTlsInfoEntry 14 }
sapTlsStpOutTcnBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the number of Topology
Change Notification BPDUs sent out this SAP."
::= { sapTlsInfoEntry 15 }
sapTlsStpOperBpduEncap OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
dot1d (2),
pvst (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpOperBpduEncap indicates
the operating encapsulation type used on BPDUs sent out
and received on this SAP."
::= { sapTlsInfoEntry 16 }
sapTlsVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsVpnId indicates the VPN ID
of the associated service."
::= { sapTlsInfoEntry 17 }
sapTlsCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID of the associated service."
::= { sapTlsInfoEntry 18 }
sapTlsMacAddressLimit OBJECT-TYPE
SYNTAX Integer32(0..196607)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsMacAddressLimit specifies
the maximum number of learned and static entries allowed
in the FDB of this SAP. The value 0 means: no limit for
this SAP. When the value of
ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the
maximum value of sapTlsMacAddressLimit is '131071'."
DEFVAL { 0 }
::= { sapTlsInfoEntry 19 }
sapTlsNumMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsNumMacAddresses indicates
the number of MAC addresses currently present in the FDB
that belong to this SAP (Both learned and static MAC
addresses are counted)."
::= { sapTlsInfoEntry 20 }
sapTlsNumStaticMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsNumStaticMacAddresses
indicates the number of static MAC addresses currently
present in the FDB that belong to this SAP."
::= { sapTlsInfoEntry 21 }
sapTlsMacLearning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level."
DEFVAL { enabled }
::= { sapTlsInfoEntry 22 }
sapTlsMacAgeing OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP. the value
is ignored if MAC aging is disabled on service level."
DEFVAL { enabled }
::= { sapTlsInfoEntry 23 }
sapTlsStpOperEdge OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpOperEdge indicates the
operational value of the Edge Port parameter. The object
is initialized to the value of sapTlsStpRapidStart and is
set FALSE on reception of a BPDU."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { sapTlsInfoEntry 24 }
sapTlsStpAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue (0),
forceFalse (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this sap. The value
'forceTrue' means that this port should always be
treated as if it is connected to a point-to-point link.
The value of 'forceFalse' means that this port should
be treated as having a shared media connection."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
DEFVAL { forceTrue }
::= { sapTlsInfoEntry 25 }
sapTlsStpPortRole OBJECT-TYPE
SYNTAX StpPortRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sapTlsStpPortRole indicates the current role of the
sap as defined by the Rapid Spanning Tree Protocol."
::= { sapTlsInfoEntry 26 }
sapTlsStpAutoEdge OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "sapTlsStpAutoEdge specifies whether this SAP
is enabled for auto-edge detection as defined by Rapid
Spanning Tree Protocol."
DEFVAL { enabled }
::= { sapTlsInfoEntry 27 }
sapTlsStpOperProtocol OBJECT-TYPE
SYNTAX StpProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sapTlsStpOperProtocol indicates whether stp, rstp or
mstp is running on this SAP. If the protocol is not
enabled on this SAP, the value notApplicable is
returned."
::= { sapTlsInfoEntry 28 }
sapTlsStpInRstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs received on
this SAP."
::= { sapTlsInfoEntry 29 }
sapTlsStpOutRstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs sent out on
this SAP."
::= { sapTlsInfoEntry 30 }
sapTlsLimitMacMove OBJECT-TYPE
SYNTAX TlsLimitMacMove
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When sapTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the re-learn rate
specified by svcTlsMacMoveMaxRate is exceeded. When
the value is 'nonBlockable' this SAP will not be
blocked, and another blockable SAP will be blocked
instead."
DEFVAL { blockable }
::= { sapTlsInfoEntry 31 }
sapTlsDhcpSnooping OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION "The value of the object sapTlsDhcpSnooping specifies
whether or not DHCP packets received on this SAP will be
snooped. This object was made obsolete in the 3.0 release."
DEFVAL { disabled }
::= { sapTlsInfoEntry 32 }
sapTlsMacPinning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsMacPinning specifies whether
or not MAC address pinning is active on this SAP. The
value will be set by default to disabled. However for a
SAP that belongs to a residential SHG, the value is set to
enabled by the system, and cannot be altered by the
operator. Setting the value to enable disables
re-learning of MAC addresses on other SAPs or
spoke-SDPs within the same VPLS; the MAC address will
hence remain attached to the SAP for the duration of
its age-timer. This object has effect only for MAC
addresses learned via the normal MAC learning
process, and not for entries learned via DHCP."
::= { sapTlsInfoEntry 33 }
sapTlsDiscardUnknownSource OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "with the object sapTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packets with unknown source MAC address are
forwarded by default. By setting
sapTlsDiscardUnknownSource to enabled, packets with
unknown source MAC will be dropped in stead."
DEFVAL { disabled }
::= { sapTlsInfoEntry 34 }
sapTlsMvplsPruneState OBJECT-TYPE
SYNTAX MvplsPruneState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsMvplsPruneState indicates the mVPLS
prune state of the SAP. The object will be set to
notApplicable if the SAP is not managed by a mVPLS. If
the SAP is managed the state reflects whether or not
the SAP is pruned by the STP instance running in the
mVPLS instance."
::= { sapTlsInfoEntry 35 }
sapTlsMvplsMgmtService OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsMvplsMgmtService indicates the
service Id of the service where the STP instance is
running that is managing this SAP. This object is
only valid if sapTlsMvplsPruneState is different from
notApplicable."
::= { sapTlsInfoEntry 36 }
sapTlsMvplsMgmtPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsMvplsMgmtPortId indicates the SAP
port Id of the SAP in the mVPLS instance specified in
sapTlsMvplsMgmtService that is controlling this SAP.
This object is only valid if sapTlsMvplsPruneState is
different from notApplicable."
::= { sapTlsInfoEntry 37 }
sapTlsMvplsMgmtEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsMvplsMgmtEncapValue indicates the
SAP Encap value of the SAP in the mVPLS instance
specified in sapTlsMvplsMgmtService that is
controlling this SAP. This object is only valid if
sapTlsMvplsPruneState is different from notApplicable."
::= { sapTlsInfoEntry 38 }
sapTlsArpReplyAgent OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2),
enabledWithSubscrIdent (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsArpReplyAgent specifies
the status of the special ARP response mechanism in the
system for ARP requests destined to static or dynamic hosts
associated with this SAP.
disabled: the ARP reply function is not operational
enabled: the ARP reply function is enabled without
subscriber identification.
enabledWithSubscrIdent: the ARP reply function is enabled
with subscriber identification."
DEFVAL { disabled }
::= { sapTlsInfoEntry 39 }
sapTlsStpException OBJECT-TYPE
SYNTAX StpExceptionCondition
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpException indicates
whether an STP exception condition is present on this
Sap.
- none : no exception condition found.
- oneWayCommuniation : The neighbor RSTP peer on this link
is not able to detect our presence.
- downstreamLoopDetected :A loop is detected on this link."
::= { sapTlsInfoEntry 40 }
sapTlsAuthenticationPolicy OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsAuthenticationPolicy specifies
which subscriber authentication policy must be applied when
a DHCP msg is received on the interface. The authentication
policies must be defined in tmnxSubAuthPlcyTable. The policy
will only be applied when sapTlsDhcpSnoop is enabled."
DEFVAL { ''H }
::= { sapTlsInfoEntry 41 }
sapTlsL2ptTermination OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsL2ptTermination specifies
whether received L2 Protocol Tunnel pdu's are terminated
on this port or sap"
DEFVAL { disabled }
::= { sapTlsInfoEntry 42 }
sapTlsBpduTranslation OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
disabled (2),
pvst (3),
stp (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsBpduTranslation specifies
whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or sap"
DEFVAL { disabled }
::= { sapTlsInfoEntry 43 }
sapTlsStpRootGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it can cause lack of spanning tree connectivity."
DEFVAL { false }
::= { sapTlsInfoEntry 44 }
sapTlsStpInsideRegion OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpInsideRegion indicates
whether the network connected to the SAP is in the same
MST region. It corresponds to the parameter 'infoInternal'
in 802.1Q."
::= { sapTlsInfoEntry 45 }
sapTlsEgressMcastGroup OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsEgressMcastGroup specifies
the Egress Multicast Group this SAP belongs to."
DEFVAL { "" }
::= { sapTlsInfoEntry 46 }
sapTlsStpInMstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpInMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs received
on this SAP."
::= { sapTlsInfoEntry 47 }
sapTlsStpOutMstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpOutMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs sent out
on this SAP."
::= { sapTlsInfoEntry 48 }
sapTlsRestProtSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsRestProtSrcMac specifies
how the agent will handle relearn requests for protected
MAC addresses. When the value of this object is 'true'
requests to relearn a protected MAC address will be
ignored.
In addition, if the value of sapTlsRestProtSrcMacAction
is 'disable', then the SAP where the protected source
MAC was seen will be brought operationally down."
DEFVAL { false }
::= { sapTlsInfoEntry 49 }
sapTlsRestUnprotDstMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsRestUnprotDstMac specifies
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' packets destined to an unprotected MAC address
will be dropped."
DEFVAL { false }
::= { sapTlsInfoEntry 50 }
sapTlsStpRxdDesigBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SAP. It identifies
which bridge is connected to the SAP."
::= { sapTlsInfoEntry 51 }
sapTlsStpRootGuardViolation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsStpRootGuardViolation
indicates whether there is a root-guard violation at the
present time. This can only happen when sapTlsStpRootGuard
is set to true."
::= { sapTlsInfoEntry 52 }
sapTlsShcvAction OBJECT-TYPE
SYNTAX INTEGER {
alarm (1),
remove (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsShcvAction
indicates whether any action should be triggered when
the connectivity check fails."
DEFVAL { alarm }
::= { sapTlsInfoEntry 53 }
sapTlsShcvSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsShcvSrcIp
specifies the source IP address used when doing the
connectivity check. The value 0.0.0.0 indicates that
no host IP address is specified."
::= { sapTlsInfoEntry 54 }
sapTlsShcvSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsShcvSrcMac
specifies the MAC address used when doing the connectivity
check. The value 0:0:0:0:0:0 indicates that no host MAC
address is specified."
::= { sapTlsInfoEntry 55 }
sapTlsShcvInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..6000)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsShcvInterval specifies
the interval in minutes between connectivity checks.
Zero means no connectivity checking."
DEFVAL { 0 }
::= { sapTlsInfoEntry 56 }
sapTlsMvplsMgmtMsti OBJECT-TYPE
SYNTAX MstiInstanceIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMvplsMgmtMsti indicates the
MST-instance in the mVPLS instance specified in
sapTlsMvplsMgmtService that is controlling this SAP. A
value of 0 indicates the CIST.
This object is only valid if sapTlsMvplsPruneState is
different from notApplicable."
::= { sapTlsInfoEntry 57 }
sapTlsMacMoveNextUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMacMoveNextUpTime counts down
the time in seconds until a SAP that has been brought down
due to exceeding the TLS svcTlsMacMoveMaxRate, sapOperFlags
'relearnLimitExceeded', is automatically brought up again.
When this value is 0xffff, the SAP will never be
automatically brought up. The value is zero when
sapOperStatus is 'up'."
::= { sapTlsInfoEntry 58 }
sapTlsMacMoveRateExcdLeft OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMacMoveRateExcdLeft
counts down the number of times this SAP can exceed the
TLS svcTlsMacMoveMaxRate and still be automatically
brought up."
::= { sapTlsInfoEntry 59 }
sapTlsRestProtSrcMacAction OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarm-only (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsRestProtSrcMacAction
indicates the action to take whenever a relearn request
for a protected MAC is received on a restricted SAP.
When the value of this object is 'disable' the SAP
will be placed in the operational down state, with the
operating flag 'recProtSrcMac' set. When the value of
this object is 'alarm-only', the SAP will be left up
and only a notification, sapReceivedProtSrcMac, will be
generated."
DEFVAL { disable }
::= { sapTlsInfoEntry 60 }
sapTlsL2ptForceBoundary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsL2ptForceBoundary specifies if
sapTlsL2ptTermination is enforced for its managed SAP's.
Setting the value of the object sapTlsL2ptForceBoundary of
a SAP in a Management VPLS to `true' forces all its
managed SAP's to have sapTlsL2ptTermination enabled. This
value can only be `true' if the SAP belongs to a
management VPLS.
If this SAP has managed SAP's already with
sapTlsL2ptTermination disabled, it is not allowed
to set sapTlsL2ptForceBoundary to `true'."
DEFVAL { false }
::= { sapTlsInfoEntry 61 }
sapTlsLimitMacMoveLevel OBJECT-TYPE
SYNTAX TlsLimitMacMoveLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsLimitMacMoveLevel
specifies the hierarchy in which SAPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bind with the lower level is blocked first.
(tertiary is the lowest)"
DEFVAL { tertiary }
::= { sapTlsInfoEntry 62 }
sapTlsBpduTransOper OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
disabled (2),
pvst (3),
stp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsBpduTransOper indicates
the operational bpdu encapsulation used for BPDU
translated frames."
::= { sapTlsInfoEntry 63 }
sapTlsDefMsapPolicy OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDefMsapPolicy specifies the
default Managed SAP policy to use to create
Managed SAPs when the response from the Radius
server does not specify a Managed SAP policy.
The value of sapTlsDefMsapPolicy is only valid for
a SAP with a sapSubType value of 'capture'.
If the value is set to a non-empty string for a
SAP with a sapSubType value other than 'capture',
an 'inconsistentValue' error will be returned.
The Managed SAP policy must be defined in
msapPlcyTable, otherwise an 'inconsistentValue'
error will be returned."
DEFVAL { "" }
::= { sapTlsInfoEntry 64 }
sapTlsL2ptProtocols OBJECT-TYPE
SYNTAX L2ptProtocols
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsL2ptTermination specifies
which L2 Protocol Tunnel pdu's are terminated
on this port or sap"
DEFVAL { { stp } }
::= { sapTlsInfoEntry 65 }
sapTlsL2ptForceProtocols OBJECT-TYPE
SYNTAX L2ptProtocols
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the value of the object
sapTlsL2ptForceBoundary is 'true'.
For every SAP managed by this SAP, each L2 protocol
specified by sapTlsL2ptForceProtocols must be terminated,
while other L2 protocols may or may not be terminated,
depending on the value of sapTlsL2ptProtocols of that
managed SAP."
DEFVAL { { stp } }
::= { sapTlsInfoEntry 66 }
sapTlsPppoeMsapTrigger OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsPppoeMsapTrigger specifies whether
the receipt of PPPoE trigger packets on a VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsPppoeMsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error."
DEFVAL { false }
::= { sapTlsInfoEntry 67 }
sapTlsDhcpMsapTrigger OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpMsapTrigger specifies whether
the receipt of DHCP trigger packets on this VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsDhcpMsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error."
DEFVAL { false }
::= { sapTlsInfoEntry 68 }
sapTlsMrpJoinTime OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsMrpJoinTime specifies a timer value in
10ths of seconds which determines the maximum rate at
which attribute join messages can be sent on the SAP."
DEFVAL { 2 }
::= { sapTlsInfoEntry 69 }
sapTlsMrpLeaveTime OBJECT-TYPE
SYNTAX Unsigned32 (30..60)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsMrpLeaveTime specifies a timer value in
10ths of seconds which determines the amount of time a
registered attribute is held in leave state before the
registration is removed."
DEFVAL { 30 }
::= { sapTlsInfoEntry 70 }
sapTlsMrpLeaveAllTime OBJECT-TYPE
SYNTAX Unsigned32 (60..300)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsMrpLeaveAllTime specifies the a timer
value in 10ths of seconds which determines the frequency
where all attribute declarations on the SAP are all
refreshed."
DEFVAL { 100 }
::= { sapTlsInfoEntry 71 }
sapTlsMrpPeriodicTime OBJECT-TYPE
SYNTAX Unsigned32 (10..100)
UNITS "deci-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsMrpPeriodicTime specifies a timer value
in 10ths of seconds which determines the frequency of
re-transmission of attribute declarations."
DEFVAL { 10 }
::= { sapTlsInfoEntry 72 }
sapTlsMrpPeriodicEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsMrpPeriodicEnabled specifies whether
re-transmission of attribute declarations is enabled."
DEFVAL { false }
::= { sapTlsInfoEntry 73 }
-- ---------------------------------------------------------------------
-- ATM SAP Table
--
--
-- Sparse Dependent Extention of the sapBaseInfoTable.
--
-- The same indexes are used for both the base table, sapBaseInfoTable,
-- and the sparse dependent table, sapAtmInfoTable.
--
-- This in effect extends the sapBaseInfoTable with additional columns.
-- Rows are created in the sapAtmInfoTable only for those entries
-- in the sapBaseInfoTable that are created on a port that 'atmEncap' set
--- for port encapsulation.
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the sapAtmInfoTable.
-- ---------------------------------------------------------------------
sapAtmInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapAtmInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ATM SAP information."
::= { tmnxSapObjs 4 }
sapAtmInfoEntry OBJECT-TYPE
SYNTAX SapAtmInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific ATM SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapAtmInfoTable 1 }
SapAtmInfoEntry ::=
SEQUENCE {
sapAtmEncapsulation INTEGER,
sapAtmIngressTrafficDescIndex AtmTrafficDescrParamIndex,
sapAtmEgressTrafficDescIndex AtmTrafficDescrParamIndex,
sapAtmOamAlarmCellHandling ServiceAdminStatus,
sapAtmOamTerminate ServiceAdminStatus,
sapAtmOamPeriodicLoopback ServiceAdminStatus
}
sapAtmEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
vcMultiplexRoutedProtocol (1),
vcMultiplexBridgedProtocol8023 (2),
llcSnapRoutedProtocol (7),
multiprotocolFrameRelaySscs (8),
unknown (10),
llcSnapBridgedProtocol8023 (11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the data encapsulation used
over the AAL5 SSCS layer. The definition references
RFC 2684 Multiprotocol Encapsulation over ATM AAL5
and to the ATM Forum LAN Emulation specification."
DEFVAL { llcSnapRoutedProtocol }
::= { sapAtmInfoEntry 1 }
sapAtmIngressTrafficDescIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the index of the ATM traffic
descriptor in the ATM traffic data encapsulation used
in for the ingress direction over the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol
Encapsulation over ATM AAL5 and to the ATM Forum LAN
Emulation specification."
DEFVAL { 1 }
::= { sapAtmInfoEntry 2 }
sapAtmEgressTrafficDescIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the index of the ATM traffic
descriptor in the ATM traffic data encapsulation used
in for the egress direction over the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol
Encapsulation over ATM AAL5 and to the ATM Forum LAN
Emulation specification."
DEFVAL { 1 }
::= { sapAtmInfoEntry 3 }
sapAtmOamAlarmCellHandling OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of up specifies that the OAM status of a pvc
affects the sap operational status and OAM AIS/RDI
cell generation upon a sap operational status of down.
A value of down specifies that the OAM status of a pvc
will not affect the operational status of the
associated sap and no OAM AIS/RDI cells are
generated."
DEFVAL { up }
::= { sapAtmInfoEntry 4 }
sapAtmOamTerminate OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The sapAtmOamTerminate object specifies whether this
SAP will act as an OAM termination point.
If enabled, OAM cells will be sunk by the SAP and can
affect the SAP's operational status (if
sapAtmOamAlarmCellHandling is also enabled). Otherwise
the OAM cells will be passed into the APIPE service.
This object is only configurable for ATM SAPs that are
part of an APIPE service SDU or VCC mode. If the
sapPortId belongs to an Multi-Chassis APS port, the
default value is up."
DEFVAL { down }
::= { sapAtmInfoEntry 5 }
sapAtmOamPeriodicLoopback OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The sapAtmOamPeriodicLoopback object specifies whether
this SAP will run periodic OAM loopbacks or not. If
enabled, an ATM OAM loopback cell will be transmitted
every period as configured in tAtmSysOamLoopbackPeriod.
If a response is not received and tAtmSysOamRetryDown
consecutive retries also result in failure, the endpoint
will transition to the eteAisLoc state. Once in the
eteAisLoc state, an ATM OAM loopback cell will be
transmitted every period as configured in
tAtmSysOamLoopbackPeriod. If a response is received for
the periodic loopback and tAtmSysOamRetryUp consecutive
retries also each receive a response, the endpoint will
transition back to the up state. This object is only
configurable on IES or VPRN service endpoints."
DEFVAL { down }
::= { sapAtmInfoEntry 6 }
-- ---------------------------------
-- Base SAP Statistics Table
-- ---------------------------------
sapBaseStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapBaseStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains basic SAP statistics.
In the descriptions below 'Pchip' refers
to the Alcatel 7x50 SR series Packet Processing
chip, while 'Qchip' refers to the Alcatel 7x50
SR series QoS Queueing Engine chip."
::= { tmnxSapObjs 6 }
sapBaseStatsEntry OBJECT-TYPE
SYNTAX SapBaseStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Basic statistics about a specific SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapBaseStatsTable 1 }
SapBaseStatsEntry ::=
SEQUENCE {
sapBaseStatsIngressPchipDroppedPackets Counter64,
sapBaseStatsIngressPchipDroppedOctets Counter64,
sapBaseStatsIngressPchipOfferedHiPrioPackets Counter64,
sapBaseStatsIngressPchipOfferedHiPrioOctets Counter64,
sapBaseStatsIngressPchipOfferedLoPrioPackets Counter64,
sapBaseStatsIngressPchipOfferedLoPrioOctets Counter64,
sapBaseStatsIngressQchipDroppedHiPrioPackets Counter64,
sapBaseStatsIngressQchipDroppedHiPrioOctets Counter64,
sapBaseStatsIngressQchipDroppedLoPrioPackets Counter64,
sapBaseStatsIngressQchipDroppedLoPrioOctets Counter64,
sapBaseStatsIngressQchipForwardedInProfPackets Counter64,
sapBaseStatsIngressQchipForwardedInProfOctets Counter64,
sapBaseStatsIngressQchipForwardedOutProfPackets Counter64,
sapBaseStatsIngressQchipForwardedOutProfOctets Counter64,
sapBaseStatsEgressQchipDroppedInProfPackets Counter64,
sapBaseStatsEgressQchipDroppedInProfOctets Counter64,
sapBaseStatsEgressQchipDroppedOutProfPackets Counter64,
sapBaseStatsEgressQchipDroppedOutProfOctets Counter64,
sapBaseStatsEgressQchipForwardedInProfPackets Counter64,
sapBaseStatsEgressQchipForwardedInProfOctets Counter64,
sapBaseStatsEgressQchipForwardedOutProfPackets Counter64,
sapBaseStatsEgressQchipForwardedOutProfOctets Counter64,
sapBaseStatsCustId TmnxCustId,
sapBaseStatsIngressPchipOfferedUncoloredPackets Counter64,
sapBaseStatsIngressPchipOfferedUncoloredOctets Counter64,
sapBaseStatsAuthenticationPktsDiscarded Counter32,
sapBaseStatsAuthenticationPktsSuccess Counter32,
sapBaseStatsLastClearedTime TimeStamp
}
sapBaseStatsIngressPchipDroppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc."
::= { sapBaseStatsEntry 1 }
sapBaseStatsIngressPchipDroppedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc."
::= { sapBaseStatsEntry 2 }
sapBaseStatsIngressPchipOfferedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapBaseStatsEntry 3 }
sapBaseStatsIngressPchipOfferedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapBaseStatsEntry 4 }
sapBaseStatsIngressPchipOfferedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapBaseStatsEntry 5 }
sapBaseStatsIngressPchipOfferedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapBaseStatsEntry 6 }
sapBaseStatsIngressQchipDroppedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 7 }
sapBaseStatsIngressQchipDroppedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 8 }
sapBaseStatsIngressQchipDroppedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 9 }
sapBaseStatsIngressQchipDroppedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 10 }
sapBaseStatsIngressQchipForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip."
::= { sapBaseStatsEntry 11 }
sapBaseStatsIngressQchipForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip."
::= { sapBaseStatsEntry 12 }
sapBaseStatsIngressQchipForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip."
::= { sapBaseStatsEntry 13 }
sapBaseStatsIngressQchipForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip."
::= { sapBaseStatsEntry 14 }
sapBaseStatsEgressQchipDroppedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 15 }
sapBaseStatsEgressQchipDroppedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 16 }
sapBaseStatsEgressQchipDroppedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 17 }
sapBaseStatsEgressQchipDroppedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapBaseStatsEntry 18 }
sapBaseStatsEgressQchipForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip."
::= { sapBaseStatsEntry 19 }
sapBaseStatsEgressQchipForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip."
::= { sapBaseStatsEntry 20 }
sapBaseStatsEgressQchipForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip."
::= { sapBaseStatsEntry 21 }
sapBaseStatsEgressQchipForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip."
::= { sapBaseStatsEntry 22 }
sapBaseStatsCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID for the associated service."
::= { sapBaseStatsEntry 23 }
sapBaseStatsIngressPchipOfferedUncoloredPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of uncolored packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapBaseStatsEntry 24 }
sapBaseStatsIngressPchipOfferedUncoloredOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of uncolored octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapBaseStatsEntry 25 }
sapBaseStatsAuthenticationPktsDiscarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of DHCP packets discarded
as result of authentication."
::= { sapBaseStatsEntry 26 }
sapBaseStatsAuthenticationPktsSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of DHCP packets successfully authenticated."
::= { sapBaseStatsEntry 27 }
sapBaseStatsLastClearedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapBaseStatsLastClearedTime indicates
the sysUpTime when the counters in this table were
last cleared."
::= { sapBaseStatsEntry 28 }
-- ----------------------------------------
-- Ingress QoS Queue SAP Statistics Table
-- ----------------------------------------
sapIngQosQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics."
::= { tmnxSapObjs 7 }
sapIngQosQueueStatsEntry OBJECT-TYPE
SYNTAX SapIngQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ingress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue, sapIngQosQueueId }
::= { sapIngQosQueueStatsTable 1 }
SapIngQosQueueStatsEntry ::=
SEQUENCE {
sapIngQosQueueId TSapIngQueueId,
sapIngQosQueueStatsOfferedHiPrioPackets Counter64,
sapIngQosQueueStatsDroppedHiPrioPackets Counter64,
sapIngQosQueueStatsOfferedLoPrioPackets Counter64,
sapIngQosQueueStatsDroppedLoPrioPackets Counter64,
sapIngQosQueueStatsOfferedHiPrioOctets Counter64,
sapIngQosQueueStatsDroppedHiPrioOctets Counter64,
sapIngQosQueueStatsOfferedLoPrioOctets Counter64,
sapIngQosQueueStatsDroppedLoPrioOctets Counter64,
sapIngQosQueueStatsForwardedInProfPackets Counter64,
sapIngQosQueueStatsForwardedOutProfPackets Counter64,
sapIngQosQueueStatsForwardedInProfOctets Counter64,
sapIngQosQueueStatsForwardedOutProfOctets Counter64,
sapIngQosCustId TmnxCustId,
sapIngQosQueueStatsUncoloredPacketsOffered Counter64,
sapIngQosQueueStatsUncoloredOctetsOffered Counter64
}
sapIngQosQueueId OBJECT-TYPE
SYNTAX TSapIngQueueId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of the ingress QoS queue of
this SAP."
::= { sapIngQosQueueStatsEntry 1 }
sapIngQosQueueStatsOfferedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosQueueStatsEntry 2 }
sapIngQosQueueStatsDroppedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosQueueStatsEntry 3 }
sapIngQosQueueStatsOfferedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosQueueStatsEntry 4 }
sapIngQosQueueStatsDroppedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosQueueStatsEntry 5 }
sapIngQosQueueStatsOfferedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosQueueStatsEntry 6 }
sapIngQosQueueStatsDroppedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosQueueStatsEntry 7 }
sapIngQosQueueStatsOfferedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosQueueStatsEntry 8 }
sapIngQosQueueStatsDroppedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosQueueStatsEntry 9 }
sapIngQosQueueStatsForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip."
::= { sapIngQosQueueStatsEntry 10 }
sapIngQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip."
::= { sapIngQosQueueStatsEntry 11 }
sapIngQosQueueStatsForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip."
::= { sapIngQosQueueStatsEntry 12 }
sapIngQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip."
::= { sapIngQosQueueStatsEntry 13 }
sapIngQosCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID for the associated service."
::= { sapIngQosQueueStatsEntry 14 }
sapIngQosQueueStatsUncoloredPacketsOffered OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of uncolored packets offered to
the ingress Qchip."
::= { sapIngQosQueueStatsEntry 15 }
sapIngQosQueueStatsUncoloredOctetsOffered OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of uncolored octets offered to
the ingress Qchip."
::= { sapIngQosQueueStatsEntry 16 }
-- ----------------------------------------
-- Egress QoS Queue SAP Statistics Table
-- ----------------------------------------
sapEgrQosQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains egress QoS queue SAP
statistics."
::= { tmnxSapObjs 8 }
sapEgrQosQueueStatsEntry OBJECT-TYPE
SYNTAX SapEgrQosQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Egress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosQueueId }
::= { sapEgrQosQueueStatsTable 1 }
SapEgrQosQueueStatsEntry ::=
SEQUENCE {
sapEgrQosQueueId TSapEgrQueueId,
sapEgrQosQueueStatsForwardedInProfPackets Counter64,
sapEgrQosQueueStatsDroppedInProfPackets Counter64,
sapEgrQosQueueStatsForwardedOutProfPackets Counter64,
sapEgrQosQueueStatsDroppedOutProfPackets Counter64,
sapEgrQosQueueStatsForwardedInProfOctets Counter64,
sapEgrQosQueueStatsDroppedInProfOctets Counter64,
sapEgrQosQueueStatsForwardedOutProfOctets Counter64,
sapEgrQosQueueStatsDroppedOutProfOctets Counter64,
sapEgrQosCustId TmnxCustId
}
sapEgrQosQueueId OBJECT-TYPE
SYNTAX TSapEgrQueueId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of the egress QoS queue of
this SAP."
::= { sapEgrQosQueueStatsEntry 1 }
sapEgrQosQueueStatsForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip."
::= { sapEgrQosQueueStatsEntry 2 }
sapEgrQosQueueStatsDroppedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosQueueStatsEntry 3 }
sapEgrQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip."
::= { sapEgrQosQueueStatsEntry 4 }
sapEgrQosQueueStatsDroppedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosQueueStatsEntry 5 }
sapEgrQosQueueStatsForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip."
::= { sapEgrQosQueueStatsEntry 6 }
sapEgrQosQueueStatsDroppedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosQueueStatsEntry 7 }
sapEgrQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip."
::= { sapEgrQosQueueStatsEntry 8 }
sapEgrQosQueueStatsDroppedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of out-of-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosQueueStatsEntry 9 }
sapEgrQosCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID for the associated service."
::= { sapEgrQosQueueStatsEntry 10 }
-- -------------------------------------------------
-- Ingress QoS Scheduler SAP Statistics Table
-- -------------------------------------------------
sapIngQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics."
::= { tmnxSapObjs 9 }
sapIngQosSchedStatsEntry OBJECT-TYPE
SYNTAX SapIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ingress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue,
IMPLIED sapIngQosSchedName }
::= { sapIngQosSchedStatsTable 1 }
SapIngQosSchedStatsEntry ::=
SEQUENCE {
sapIngQosSchedName TNamedItem,
sapIngQosSchedStatsForwardedPackets Counter64,
sapIngQosSchedStatsForwardedOctets Counter64,
sapIngQosSchedCustId TmnxCustId
}
sapIngQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the ingress QoS scheduler of
this SAP."
::= { sapIngQosSchedStatsEntry 1 }
sapIngQosSchedStatsForwardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosSchedStatsEntry 2 }
sapIngQosSchedStatsForwardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip."
::= { sapIngQosSchedStatsEntry 3 }
sapIngQosSchedCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID for the associated service."
::= { sapIngQosSchedStatsEntry 4 }
-- ---------------------------------------------
-- Egress QoS Scheduler SAP Statistics Table
-- ---------------------------------------------
sapEgrQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics."
::= { tmnxSapObjs 10 }
sapEgrQosSchedStatsEntry OBJECT-TYPE
SYNTAX SapEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Egress statistics about a specific SAP's
QoS queue."
INDEX { svcId, sapPortId, sapEncapValue,
IMPLIED sapEgrQosSchedName }
::= { sapEgrQosSchedStatsTable 1 }
SapEgrQosSchedStatsEntry ::=
SEQUENCE {
sapEgrQosSchedName TNamedItem,
sapEgrQosSchedStatsForwardedPackets Counter64,
sapEgrQosSchedStatsForwardedOctets Counter64,
sapEgrQosSchedCustId TmnxCustId
}
sapEgrQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the egress QoS scheduler of
this SAP."
::= { sapEgrQosSchedStatsEntry 1 }
sapEgrQosSchedStatsForwardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets by the
egress Qchip, as determined by the SAP
egress scheduler policy."
::= { sapEgrQosSchedStatsEntry 2 }
sapEgrQosSchedStatsForwardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets by the
egress Qchip, as determined by the SAP
egress scheduler policy."
::= { sapEgrQosSchedStatsEntry 3 }
sapEgrQosSchedCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Customer ID for the associated service."
::= { sapEgrQosSchedStatsEntry 4 }
-- -----------------------------------------
-- TLS SAP Managed VLAN List Table
-- -----------------------------------------
sapTlsManagedVlanListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsManagedVlanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used only for SAPs that are part
of a management VPLS. It indicates for each SAP the
ranges of associated VLANs that will be affected when
the SAP changes state."
::= { tmnxSapObjs 11 }
sapTlsManagedVlanListEntry OBJECT-TYPE
SYNTAX SapTlsManagedVlanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row specifies a range of VLANS associated
with a SAP of a MVPLS. Ranges may contains overlapping
sections only for Mvpls SAPs that belong to the same
service."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapTlsMvplsMinVlanTag,
sapTlsMvplsMaxVlanTag }
::= { sapTlsManagedVlanListTable 1 }
SapTlsManagedVlanListEntry ::=
SEQUENCE {
sapTlsMvplsMinVlanTag Unsigned32,
sapTlsMvplsMaxVlanTag Unsigned32,
sapTlsMvplsRowStatus RowStatus
}
sapTlsMvplsMinVlanTag OBJECT-TYPE
SYNTAX Unsigned32(0 .. 4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapTlsMvplsMinVlanTag specifies
the left bound (i.e. min. value) of a range of VLANs
that are associated with the Mvpls SAP.
sapTlsMvplsMinVlanTag must be smaller than (or equal
to) sapTlsMvplsMaxVlanTag.
Special values are:
0: this value is reserved for the null tag.
4095: this value denotes the default SAP."
::= { sapTlsManagedVlanListEntry 1 }
sapTlsMvplsMaxVlanTag OBJECT-TYPE
SYNTAX Unsigned32(0 .. 4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapTlsMvplsMaxVlanTag specifies the
right bound (i.e. max. value) of a range of VLANs that
are associated with the Mvpls SAP.
Special values are:
0: this value is reserved for the null tag.
4095: this value denotes the default SAP."
::= { sapTlsManagedVlanListEntry 2 }
sapTlsMvplsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapTlsMvplsRowStatus specifies
the status of this row. The only values supported
during a set operation are 'createAndGo' and
'destroy'. A row (i.e. a range of VLAN tags) can be
destroyed only if there are no SAPs defined in
regular VPLSses in this range."
::= { sapTlsManagedVlanListEntry 3 }
-- ----------------------------------------------------
-- SAP Anti-spoof Table
-- ----------------------------------------------------
sapAntiSpoofTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapAntiSpoofEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sapAntiSpoofTable contains information about
anti-spoofing filters on a SAP."
::= { tmnxSapObjs 12 }
sapAntiSpoofEntry OBJECT-TYPE
SYNTAX SapAntiSpoofEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the sapAntiSpoofTable."
INDEX { sapPortId,
sapEncapValue,
sapAntiSpoofIpAddress,
sapAntiSpoofMacAddress }
::= { sapAntiSpoofTable 1 }
SapAntiSpoofEntry ::=
SEQUENCE {
sapAntiSpoofIpAddress IpAddress,
sapAntiSpoofMacAddress MacAddress
}
sapAntiSpoofIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapAntiSpoofIpAddress indicates the IP
address for which this table entry contains information."
::= { sapAntiSpoofEntry 1 }
sapAntiSpoofMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapAntiSpoofMacAddress indicates the MAC
address for which this table entry contains information."
::= { sapAntiSpoofEntry 2 }
-- -----------------------------------------
-- SAP Static Host Table
-- -----------------------------------------
sapStaticHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapStaticHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sapStaticHostTable is used to configure static hosts
on a SAP."
::= { tmnxSapObjs 13 }
sapStaticHostEntry OBJECT-TYPE
SYNTAX SapStaticHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents information on a statically
configured host. Entries can be created and deleted via
SNMP SET operations."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapStaticHostIpAddress,
sapStaticHostMacAddress }
::= { sapStaticHostTable 1 }
SapStaticHostEntry ::=
SEQUENCE {
sapStaticHostRowStatus RowStatus,
sapStaticHostIpAddress IpAddress,
sapStaticHostMacAddress MacAddress,
sapStaticHostSubscrIdent DisplayString,
sapStaticHostSubProfile ServObjName,
sapStaticHostSlaProfile ServObjName,
sapStaticHostShcvOperState INTEGER,
sapStaticHostShcvChecks Unsigned32,
sapStaticHostShcvReplies Unsigned32,
sapStaticHostShcvReplyTime TimeStamp,
sapStaticHostDynMacAddress MacAddress,
sapStaticHostRetailerSvcId TmnxServId,
sapStaticHostRetailerIf InterfaceIndexOrZero,
sapStaticHostFwdingState TmnxOperState,
sapStaticHostAncpString DisplayString,
sapStaticHostSubIdIsSapId TruthValue,
sapStaticHostAppProfile ServObjName,
sapStaticHostIntermediateDestId DisplayString
}
sapStaticHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapStaticHostRowStatus controls
the creation and deletion of rows in this table."
::= { sapStaticHostEntry 1 }
sapStaticHostIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of the object sapStaticHostIpAddress specifies
the IP address associated with this static host. The value
0.0.0.0 indicates that no host IP address is specified."
::= { sapStaticHostEntry 2 }
sapStaticHostMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of the object sapStaticHostMacAddress specifies
the MAC address associated with this static host. The
value 0:0:0:0:0:0 indicates that no host MAC address is
specified."
::= { sapStaticHostEntry 3 }
sapStaticHostSubscrIdent OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapStaticHostSubscrIdent specifies
the subscriber identification for this static host."
DEFVAL { "" }
::= { sapStaticHostEntry 4 }
sapStaticHostSubProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapStaticHostSubProfile specifies
the subscriber profile for this static host. The specified
subscriber profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable."
DEFVAL { "" }
::= { sapStaticHostEntry 5 }
sapStaticHostSlaProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapStaticHostSlaProfile specifies
the SLA profile for this static host. The specified
SLA profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable."
DEFVAL { "" }
::= { sapStaticHostEntry 6 }
sapStaticHostShcvOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
undefined (2),
down (3),
up (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostShcvOperState
gives the state of the subscriber host connectivity
check for this static host."
::= { sapStaticHostEntry 7 }
sapStaticHostShcvChecks OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostShcvChecks specifies
the number of connectivity checks for this static host."
::= { sapStaticHostEntry 8 }
sapStaticHostShcvReplies OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostShcvReplies specifies
the number of host replies for this static host."
::= { sapStaticHostEntry 9 }
sapStaticHostShcvReplyTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostShcvReplyTime
gives the timestamp of the last successful connectivity
check for this static host."
::= { sapStaticHostEntry 10 }
sapStaticHostDynMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostDynMacAddress gives
the MAC address learned via ARP in case this is an IP-only
static host (sapStaticHostMacAddress is set to
0:0:0:0:0:0).
The value 0:0:0:0:0:0 indicates that no MAC address is
learned yet."
::= { sapStaticHostEntry 11 }
sapStaticHostRetailerSvcId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostRetailerSvcId
indicates the service ID of the retailer VPRN service
to which this static host belongs. When this object is
non zero, the static host belongs to a retailer VPRN."
::= { sapStaticHostEntry 12 }
sapStaticHostRetailerIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapStaticHostRetailerIf indicates
the interface index of the retailer VPRN interface to which
this static host belongs. When this object is non zero,
the static host belongs to a retailer VPRN."
::= { sapStaticHostEntry 13 }
sapStaticHostFwdingState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapStaticHostFwdingState indicates the
forwarding state of this static host. When the value
is 'outOfService', host traffic is not forwarded.
When it is 'inService', host traffic is forwarded."
::= { sapStaticHostEntry 14 }
sapStaticHostAncpString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapStaticHostAncpString specifies
the ancp-string associated to this SAP host."
DEFVAL { "" }
::= { sapStaticHostEntry 15 }
sapStaticHostSubIdIsSapId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of the object sapStaticHostSubIdIsSapId
specifies whether the SAP-id is taken as subscriber
identification for this static host."
DEFVAL { false }
::= { sapStaticHostEntry 16 }
sapStaticHostAppProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapStaticHostAppProfile specifies
the application profile for this static host. The
specified application profile needs to exist in the
TIMETRA-BSX-MIB::tmnxBsxAppProfTable."
DEFVAL { "" }
::= { sapStaticHostEntry 17 }
sapStaticHostIntermediateDestId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapStaticHostIntermediateDestId specifies
to which intermediate destination (for example a DSLAM)
this host belongs."
DEFVAL { "" }
::= { sapStaticHostEntry 18 }
-- ----------------------------------------
-- SAP Tls DHCP Information Table
-- ----------------------------------------
sapTlsDhcpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sapTlsDhcpInfoTable contains DHCP information related
to a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this
table are created and deleted automatically by the system."
::= { tmnxSapObjs 14 }
sapTlsDhcpInfoEntry OBJECT-TYPE
SYNTAX SapTlsDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " DHCP specific information for a TLS SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapTlsDhcpInfoTable 1 }
SapTlsDhcpInfoEntry ::=
SEQUENCE {
sapTlsDhcpAdminState TmnxEnabledDisabled,
sapTlsDhcpDescription ServObjDesc,
sapTlsDhcpSnoop TmnxEnabledDisabled,
sapTlsDhcpLeasePopulate Unsigned32,
sapTlsDhcpOperLeasePopulate Unsigned32,
sapTlsDhcpInfoAction INTEGER,
sapTlsDhcpCircuitId INTEGER,
sapTlsDhcpRemoteId INTEGER,
sapTlsDhcpRemoteIdString DisplayString,
sapTlsDhcpProxyAdminState TmnxEnabledDisabled,
sapTlsDhcpProxyServerAddr IpAddress,
sapTlsDhcpProxyLeaseTime Unsigned32,
sapTlsDhcpProxyLTRadiusOverride TruthValue,
sapTlsDhcpVendorIncludeOptions BITS,
sapTlsDhcpVendorOptionString DisplayString
}
sapTlsDhcpAdminState OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpAdminState specifies
the overall enable/disable state of all DHCP related
actions on this Sap. The value 'disabled' allows
the user to configure individual DHCP commands but
administratively disable them."
DEFVAL { disabled }
::= { sapTlsDhcpInfoEntry 1 }
sapTlsDhcpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpDescription specifies
a user provided description for DHCP on this Sap.
It consists of any printable, seven-bit ASCII characters
up to 80 characters in length."
DEFVAL { ''H }
::= { sapTlsDhcpInfoEntry 2 }
sapTlsDhcpSnoop OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpSnoop specifies
the enable/disable state for DHCP snooping on this Sap.
Note that in order for snooping to be enabled
the object sapTlsDhcpAdminState must also have the
value enabled."
DEFVAL { disabled }
::= { sapTlsDhcpInfoEntry 3 }
sapTlsDhcpLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpLeasePopulate specifies
the maximum number of DHCP lease states allowed on this
SAP."
DEFVAL { 0 }
::= { sapTlsDhcpInfoEntry 4 }
sapTlsDhcpOperLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpOperLeasePopulate
indicates the number of DHCP lease states currently
allocated on this SAP."
::= { sapTlsDhcpInfoEntry 5 }
sapTlsDhcpInfoAction OBJECT-TYPE
SYNTAX INTEGER {
replace (1),
drop (2),
keep (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpInfoAction specifies
the DHCP option reforwarding policy:
'replace' - replace existing information with
configured information
'drop' - discard messages with existing relay
information if the option-82 information
is also present.
'keep' - retain the existing relay information."
DEFVAL { keep }
::= { sapTlsDhcpInfoEntry 6 }
sapTlsDhcpCircuitId OBJECT-TYPE
SYNTAX INTEGER {
none (0),
asciiTuple (1),
vlanAsciiTuple (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpCircuitId specifies
whether or not the circuit-id suboption is present, and if
it is present what information goes in it:
- 'none' the circuit-id suboption will not be part
of the information option (Option 82).
- 'asciiTuple' the ASCII-encoded concatenated tuple
consisting of the
- access-node-identifier
- service-id
- interface-name
is used.
- 'vlanAsciiTuple' the format will include VLAN-id and dot1p
bits in addition to what is included in
ascii-tuple already. The format is
supported on dot1q and qinq encapsulated
ports only. Thus, when the option 82
bits are stripped, dot1p bits will be
copied to the Ethernet header of an
outgoing packet."
DEFVAL { asciiTuple }
::= { sapTlsDhcpInfoEntry 7 }
sapTlsDhcpRemoteId OBJECT-TYPE
SYNTAX INTEGER {
none (1),
mac (2),
remote-id (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpRemoteId specifies
what information goes into the remote-id suboption in
the DHCP Relay packet.
If the value of this object is set to 'none',
the remote-id suboption will not be part of the
information option (Option 82).
If the value of this object is set to 'mac',
the MAC address of the remote end is encoded in the
suboption.
If the value of this object is set to 'remote-id',
sapTlsDhcpRemoteIdString will represent the remote-id.
By default, the remote-id value is none."
DEFVAL { none }
::= { sapTlsDhcpInfoEntry 8 }
sapTlsDhcpRemoteIdString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpRemoteIdString specifies
the remote-id. This object exists only if
sapTlsDhcpRemoteId has a value of 'remote-id'."
DEFVAL { "" }
::= { sapTlsDhcpInfoEntry 9 }
sapTlsDhcpProxyAdminState OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpProxyAdminState specifies the
desired administrative state of the proxy server on this
interface.
Note that in order for the proxy server to be enabled,
the value of sapTlsDhcpAdminState must also be 'enabled'."
DEFVAL { disabled }
::= { sapTlsDhcpInfoEntry 10 }
sapTlsDhcpProxyServerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpProxyServerAddr specifies
the IP address which will be used as the source address
of the emulated DHCP server in the context of
this VPLS SAP.
This address is mandatory for the proxy server capability
and it should be in the context of the subnet represented
by this VPLS."
DEFVAL { '00000000'H }
::= { sapTlsDhcpInfoEntry 11 }
sapTlsDhcpProxyLeaseTime OBJECT-TYPE
SYNTAX Unsigned32 (0|300..315446399)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpProxyLeaseTime specifies in seconds
how long a DHCP client is allowed to use the offered IP
address.
Value 0 means the lease time provided by a RADIUS or
an upstream DHCP server will not be overridden. A lease
time of 7 days is used when RADIUS does not provide
a lease time."
DEFVAL { 0 }
::= { sapTlsDhcpInfoEntry 12 }
sapTlsDhcpProxyLTRadiusOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpProxyLTRadiusOverride specifies
whether or not the lease time provided by the RADIUS
server is presented to the DHCP client.
By default the proxy-server will always make use of
sapTlsDhcpProxyLeaseTime, regardless of what lease time
information is provided from the RADIUS server.
When sapTlsDhcpProxyLTRadiusOverride is set to 'true', the
proxy-server will use the lease time information provided
by the RADIUS server, regardless of the configured one."
DEFVAL { false }
::= { sapTlsDhcpInfoEntry 13 }
sapTlsDhcpVendorIncludeOptions OBJECT-TYPE
SYNTAX BITS {
systemId (0),
clientMac (1),
serviceId (2),
sapId (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpVendorIncludeOptions specifies
what is encoded in the Alcatel vendor specific
sub-option of option 82.
The value of this object is only used when
sapTlsDhcpInfoAction is 'replace'."
DEFVAL { { systemId } }
::= { sapTlsDhcpInfoEntry 14 }
sapTlsDhcpVendorOptionString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of sapTlsDhcpVendorOptionString specifies the
string that goes into the Alcatel vendor specific
sub-option of option 82.
This string is only used when sapTlsDhcpInfoAction is set
to 'replace'."
DEFVAL { "" }
::= { sapTlsDhcpInfoEntry 15 }
-- --------------------------------------
-- SAP Tls Dhcp Stats Table
-- --------------------------------------
sapTlsDhcpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsDhcpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sapTlsDhcpStatsTable contains DHCP statistics related
to a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this
table are created and deleted automatically by the
system."
::= { tmnxSapObjs 15 }
sapTlsDhcpStatsEntry OBJECT-TYPE
SYNTAX SapTlsDhcpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " DHCP statistics for a TLS SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapTlsDhcpStatsTable 1 }
SapTlsDhcpStatsEntry ::=
SEQUENCE {
sapTlsDhcpStatsClntSnoopdPckts Counter32,
sapTlsDhcpStatsSrvrSnoopdPckts Counter32,
sapTlsDhcpStatsClntForwdPckts Counter32,
sapTlsDhcpStatsSrvrForwdPckts Counter32,
sapTlsDhcpStatsClntDropdPckts Counter32,
sapTlsDhcpStatsSrvrDropdPckts Counter32,
sapTlsDhcpStatsClntProxRadPckts Counter32,
sapTlsDhcpStatsClntProxLSPckts Counter32,
sapTlsDhcpStatsGenReleasePckts Counter32,
sapTlsDhcpStatsGenForceRenPckts Counter32
}
sapTlsDhcpStatsClntSnoopdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsClntSnoopdPckts
indicates the number of DHCP client packets that have
been snooped on this SAP."
::= { sapTlsDhcpStatsEntry 1 }
sapTlsDhcpStatsSrvrSnoopdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsSrvrSnoopdPckts
indicates the number of DHCP server packets that have
been snooped on this SAP."
::= { sapTlsDhcpStatsEntry 2 }
sapTlsDhcpStatsClntForwdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsClntForwdPckts
indicates the number of DHCP client packets that
have been forwarded on this SAP."
::= { sapTlsDhcpStatsEntry 3 }
sapTlsDhcpStatsSrvrForwdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsSrvrForwdPckts
indicates the number of DHCP server packets that have
been forwarded on this SAP."
::= { sapTlsDhcpStatsEntry 4 }
sapTlsDhcpStatsClntDropdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsClntDropdPckts
indicates the number of DHCP client packets that have
been dropped on this SAP."
::= { sapTlsDhcpStatsEntry 5 }
sapTlsDhcpStatsSrvrDropdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsSrvrDropdPckts
indicates the number of DHCP server packets that have
been dropped on this SAP."
::= { sapTlsDhcpStatsEntry 6 }
sapTlsDhcpStatsClntProxRadPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsClntProxRadPckts
indicates the number of DHCP client packets that have
been proxied on this SAP based on data received from a
RADIUS server."
::= { sapTlsDhcpStatsEntry 7 }
sapTlsDhcpStatsClntProxLSPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsClntProxLSPckts
indicates the number of DHCP client packets that have
been proxied on this SAP based on a lease state. The
lease itself can have been obtained from a DHCP or RADIUS
server. This is the so called lease split functionality."
::= { sapTlsDhcpStatsEntry 8 }
sapTlsDhcpStatsGenReleasePckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsGenReleasePckts
indicates the number of DHCP RELEASE messages spoofed on
this SAP to the DHCP server."
::= { sapTlsDhcpStatsEntry 9 }
sapTlsDhcpStatsGenForceRenPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsDhcpStatsGenForceRenPckts
indicates the number of DHCP FORCERENEW messages spoofed
on this SAP to the DHCP clients."
::= { sapTlsDhcpStatsEntry 10 }
-- ----------------------------------------
-- SAP Tls Dhcp Lease State Table
-- ----------------------------------------
sapTlsDhcpLeaseStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsDhcpLeaseStateEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "sapTlsDhcpLeaseStateTable contains DHCP lease state info
for a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this table
are created and deleted automatically by the system.
The content of this table is moved to the
svcDhcpLeaseStateTable."
::= { tmnxSapObjs 16 }
sapTlsDhcpLeaseStateEntry OBJECT-TYPE
SYNTAX SapTlsDhcpLeaseStateEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "DHCP Lease State information on a TLS SAP."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapTlsDhcpLseStateCiAddr,
sapTlsDhcpLseStateChAddr }
::= { sapTlsDhcpLeaseStateTable 1 }
SapTlsDhcpLeaseStateEntry ::=
SEQUENCE {
sapTlsDhcpLseStateCiAddr IpAddress,
sapTlsDhcpLseStateChAddr MacAddress,
sapTlsDhcpLseStateRemainLseTime Unsigned32,
sapTlsDhcpLseStateOption82 OCTET STRING,
sapTlsDhcpLseStatePersistKey Unsigned32
}
sapTlsDhcpLseStateCiAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "The value of the object sapTlsDhcpLseStateCiAddr indicates
the IP address of the DHCP lease state."
::= { sapTlsDhcpLeaseStateEntry 1 }
sapTlsDhcpLseStateChAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "The value of the object sapTlsDhcpLseStateChAddr indicates
the MAC address of the DHCP lease state."
::= { sapTlsDhcpLeaseStateEntry 2 }
sapTlsDhcpLseStateRemainLseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The value of the object sapTlsDhcpLseStateRemainLseTime
indicates the remaining lease time of the Ip address of
the DHCP lease state.
This object was made obsolete in the 4.0 release."
::= { sapTlsDhcpLeaseStateEntry 3 }
sapTlsDhcpLseStateOption82 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The value of the object sapTlsDhcpLseStateOption82
indicates the content of the Option82 for this DHCP
lease state.
This object was made obsolete in the 4.0 release."
::= { sapTlsDhcpLeaseStateEntry 4 }
sapTlsDhcpLseStatePersistKey OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The value of the object sapTlsDhcpLseStatePersistKey
indicates a key value that can be used to track this lease
state in the persistence file.
This object was made obsolete in the 4.0 release."
::= { sapTlsDhcpLeaseStateEntry 5 }
-- --------------------------------------------
-- Ingress QoS Scheduler SAP Statistics Table
-- --------------------------------------------
sapPortIdIngQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapPortIdIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sapPortIdIngQosSchedStatsTable contains ingress QoS
queue SAP statistics. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS."
::= { tmnxSapObjs 17 }
sapPortIdIngQosSchedStatsEntry OBJECT-TYPE
SYNTAX SapPortIdIngQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry represents the ingress statistics about a
specific SAP's QoS queue. Entries are created when
a scheduler policy is applied to a SAP."
INDEX { svcId, sapPortId, sapEncapValue,
sapPortIdIngQosSchedName, sapPortIdIngPortId }
::= { sapPortIdIngQosSchedStatsTable 1 }
SapPortIdIngQosSchedStatsEntry ::=
SEQUENCE {
sapPortIdIngQosSchedName TNamedItem,
sapPortIdIngPortId TmnxPortID,
sapPortIdIngQosSchedFwdPkts Counter64,
sapPortIdIngQosSchedFwdOctets Counter64,
sapPortIdIngQosSchedCustId TmnxCustId
}
sapPortIdIngQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapPortIdIngQosSchedName is used as an index
of the ingress QoS scheduler of this SAP."
::= { sapPortIdIngQosSchedStatsEntry 1 }
sapPortIdIngPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapPortIdIngPortId is used
as an index of the ingress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied."
::= {sapPortIdIngQosSchedStatsEntry 2 }
sapPortIdIngQosSchedFwdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapPortIdIngQosSchedFwdPkts indicates
the number of forwarded packets, as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapPortIdIngQosSchedStatsEntry 3 }
sapPortIdIngQosSchedFwdOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapPortIdIngQosSchedFwdOctets indicates
the number of forwarded octets,as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapPortIdIngQosSchedStatsEntry 4 }
sapPortIdIngQosSchedCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapPortIdIngQosSchedCustId indicates the
Customer ID for the associated service."
::= { sapPortIdIngQosSchedStatsEntry 5 }
-- ------------------------------------------------------------
-- Egress QoS Scheduler SAP Statistics Table for Link mode SAPs
-- ------------------------------------------------------------
sapPortIdEgrQosSchedStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapPortIdEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sapPortIdEgrQosSchedStatsTable contains egress QoS
queue SAP statistics. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS."
::= { tmnxSapObjs 18 }
sapPortIdEgrQosSchedStatsEntry OBJECT-TYPE
SYNTAX SapPortIdEgrQosSchedStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry represents the egress statistics about a
specific SAP's QoS queue. Entries are created when
a scheduler policy is applied to a SAP."
INDEX { svcId, sapPortId, sapEncapValue,
sapPortIdEgrQosSchedName, sapPortIdEgrPortId }
::= { sapPortIdEgrQosSchedStatsTable 1 }
SapPortIdEgrQosSchedStatsEntry ::=
SEQUENCE {
sapPortIdEgrQosSchedName TNamedItem,
sapPortIdEgrPortId TmnxPortID,
sapPortIdEgrQosSchedFwdPkts Counter64,
sapPortIdEgrQosSchedFwdOctets Counter64,
sapPortIdEgrQosSchedCustId TmnxCustId
}
sapPortIdEgrQosSchedName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapPortIdEgrQosSchedName is used as an index
of the egress QoS scheduler of this SAP."
::= { sapPortIdEgrQosSchedStatsEntry 1 }
sapPortIdEgrPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapPortIdEgrPortId is used
as an index of the egress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied."
::= {sapPortIdEgrQosSchedStatsEntry 2 }
sapPortIdEgrQosSchedFwdPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapPortIdEgrQosSchedFwdPkts indicates
the number of forwarded packets, as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapPortIdEgrQosSchedStatsEntry 3 }
sapPortIdEgrQosSchedFwdOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapPortIdEgrQosSchedFwdOctets indicates
the number of forwarded octets,as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapPortIdEgrQosSchedStatsEntry 4 }
sapPortIdEgrQosSchedCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapPortIdEgrQosSchedCustId indicates the
Customer ID for the associated service."
::= { sapPortIdEgrQosSchedStatsEntry 5 }
-- ------------------------------------------
-- SAP Ingress QoS Queue Table
-- ------------------------------------------
sapIngQosQueueInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosQueueInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to override the base parameters
of a queue, as defined in the associated SAP
ingress QoS policy."
::= { tmnxSapObjs 19 }
sapIngQosQueueInfoEntry OBJECT-TYPE
SYNTAX SapIngQosQueueInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Override values for the specified SAP ingress QoS
queue. These values override the corresponding ones
specified in the associated SAP ingress QoS policy."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapIngQosQId }
::= { sapIngQosQueueInfoTable 1 }
SapIngQosQueueInfoEntry ::=
SEQUENCE {
sapIngQosQId TIngressQueueId,
sapIngQosQRowStatus RowStatus,
sapIngQosQLastMgmtChange TimeStamp,
sapIngQosQOverrideFlags TQosQueueAttribute,
sapIngQosQCBS TBurstSize,
sapIngQosQMBS TBurstSize,
sapIngQosQHiPrioOnly TBurstPercentOrDefault,
sapIngQosQCIRAdaptation TAdaptationRule,
sapIngQosQPIRAdaptation TAdaptationRule,
sapIngQosQAdminPIR TPIRRate,
sapIngQosQAdminCIR TCIRRate
}
sapIngQosQId OBJECT-TYPE
SYNTAX TIngressQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapIngQosQId indicates the ID of the
queue whose parameters are to be overridden."
::= { sapIngQosQueueInfoEntry 1 }
sapIngQosQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQRowStatus controls the creation
and deletion of rows in this table."
::= { sapIngQosQueueInfoEntry 2 }
sapIngQosQLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIngQosQLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row."
::= { sapIngQosQueueInfoEntry 3 }
sapIngQosQOverrideFlags OBJECT-TYPE
SYNTAX TQosQueueAttribute
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this queue. Clearing a given flag
will return the corresponding overridden attribute
to the value defined on the SAP's ingress QoS policy."
::= { sapIngQosQueueInfoEntry 4 }
sapIngQosQCBS OBJECT-TYPE
SYNTAX TBurstSize
UNITS "kilo bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQCBS specifies the amount of
reserved buffer space (in kilo bytes) for this queue."
DEFVAL { -1 }
::= { sapIngQosQueueInfoEntry 5 }
sapIngQosQMBS OBJECT-TYPE
SYNTAX TBurstSize
UNITS "kilo bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQMBS specifies the maximum
amount of buffer space (in kilo bytes) allowed for
this queue."
DEFVAL { -1 }
::= { sapIngQosQueueInfoEntry 6 }
sapIngQosQHiPrioOnly OBJECT-TYPE
SYNTAX TBurstPercentOrDefault
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQHiPrioOnly specifies the
percentage of buffer space for this queue, used
exclusively by high priority packets."
DEFVAL { -1 }
::= { sapIngQosQueueInfoEntry 7 }
sapIngQosQCIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQCIRAdaptation specifies the
criteria to use to compute the operational CIR value
for this queue, while maintaining a minimum offset."
DEFVAL { closest }
::= { sapIngQosQueueInfoEntry 8 }
sapIngQosQPIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQPIRAdaptation specifies the
criteria to use to compute the operational PIR value
for this queue, while maintaining a minimum offset."
DEFVAL { closest }
::= { sapIngQosQueueInfoEntry 9 }
sapIngQosQAdminPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQAdminPIR specifies the desired
PIR value for this queue."
DEFVAL { -1 }
::= { sapIngQosQueueInfoEntry 10 }
sapIngQosQAdminCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosQAdminCIR specifies the desired
CIR value for this queue."
DEFVAL { -1 }
::= { sapIngQosQueueInfoEntry 11 }
-- ----------------------------
-- SAP Egress QoS Queue Table
-- ----------------------------
sapEgrQosQueueInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosQueueInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to override the base parameters
of a queue, as defined in the associated SAP
egress QoS policy."
::= { tmnxSapObjs 20 }
sapEgrQosQueueInfoEntry OBJECT-TYPE
SYNTAX SapEgrQosQueueInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Override values for the specified SAP egress QoS
queue. These values override the corresponding ones
specified in the associated SAP egress QoS policy."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapEgrQosQId }
::= { sapEgrQosQueueInfoTable 1 }
SapEgrQosQueueInfoEntry ::=
SEQUENCE {
sapEgrQosQId TEgressQueueId,
sapEgrQosQRowStatus RowStatus,
sapEgrQosQLastMgmtChange TimeStamp,
sapEgrQosQOverrideFlags TQosQueueAttribute,
sapEgrQosQCBS TBurstSize,
sapEgrQosQMBS TBurstSize,
sapEgrQosQHiPrioOnly TBurstPercentOrDefault,
sapEgrQosQCIRAdaptation TAdaptationRule,
sapEgrQosQPIRAdaptation TAdaptationRule,
sapEgrQosQAdminPIR TPIRRate,
sapEgrQosQAdminCIR TCIRRate,
sapEgrQosQAvgOverhead Unsigned32
}
sapEgrQosQId OBJECT-TYPE
SYNTAX TEgressQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapEgrQosQId indicates the ID of the
queue whose parameters are to be overridden."
::= { sapEgrQosQueueInfoEntry 1 }
sapEgrQosQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQRowStatus controls the creation
and deletion of rows in this table."
::= { sapEgrQosQueueInfoEntry 2 }
sapEgrQosQLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgrQosQLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row."
::= { sapEgrQosQueueInfoEntry 3 }
sapEgrQosQOverrideFlags OBJECT-TYPE
SYNTAX TQosQueueAttribute
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this queue. Clearing a given flag
will return the corresponding overridden attribute
to the value defined on the SAP's ingress QoS policy."
::= { sapEgrQosQueueInfoEntry 4 }
sapEgrQosQCBS OBJECT-TYPE
SYNTAX TBurstSize
UNITS "kilo bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQCBS specifies the amount of
reserved buffer space (in kilo bytes) for this queue."
DEFVAL { -1 }
::= { sapEgrQosQueueInfoEntry 5 }
sapEgrQosQMBS OBJECT-TYPE
SYNTAX TBurstSize
UNITS "kilo bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQMBS specifies the maximum
amount of buffer space (in kilo bytes) allowed for
this queue."
DEFVAL { -1 }
::= { sapEgrQosQueueInfoEntry 6 }
sapEgrQosQHiPrioOnly OBJECT-TYPE
SYNTAX TBurstPercentOrDefault
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQHiPrioOnly specifies the
percentage of buffer space for this queue, used
exclusively by high priority packets."
DEFVAL { -1 }
::= { sapEgrQosQueueInfoEntry 7 }
sapEgrQosQCIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQCIRAdaptation specifies the
criteria to use to compute the operational CIR value
for this queue, while maintaining a minimum offset."
DEFVAL { closest }
::= { sapEgrQosQueueInfoEntry 8 }
sapEgrQosQPIRAdaptation OBJECT-TYPE
SYNTAX TAdaptationRule
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQPIRAdaptation specifies the
criteria to use to compute the operational PIR value
for this queue, while maintaining a minimum offset."
DEFVAL { closest }
::= { sapEgrQosQueueInfoEntry 9 }
sapEgrQosQAdminPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQAdminPIR specifies the desired
PIR value for this queue."
DEFVAL { -1 }
::= { sapEgrQosQueueInfoEntry 10 }
sapEgrQosQAdminCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQAdminCIR specifies the desired
CIR value for this queue."
DEFVAL { -1 }
::= { sapEgrQosQueueInfoEntry 11 }
sapEgrQosQAvgOverhead OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosQAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent,
used to translate packet-based rate to frame-based
rate and vice versa."
DEFVAL { 0 }
::= { sapEgrQosQueueInfoEntry 12 }
-- ------------------------------------
-- SAP Ingress QoS Scheduler Table
-- ------------------------------------
sapIngQosSchedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosSchedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to override the base parameters
of a virtual scheduler, as defined in the associated
SAP ingress scheduler policy."
::= { tmnxSapObjs 21 }
sapIngQosSchedInfoEntry OBJECT-TYPE
SYNTAX SapIngQosSchedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Override values for the specified SAP ingress virtual
scheduler. These values override the corresponding
ones specified in the associated SAP ingress scheduler
policy."
INDEX { svcId,
sapPortId,
sapEncapValue,
IMPLIED sapIngQosSName }
::= { sapIngQosSchedInfoTable 1 }
SapIngQosSchedInfoEntry ::=
SEQUENCE {
sapIngQosSName TNamedItem,
sapIngQosSRowStatus RowStatus,
sapIngQosSLastMgmtChange TimeStamp,
sapIngQosSOverrideFlags TVirtSchedAttribute,
sapIngQosSPIR TPIRRate,
sapIngQosSCIR TCIRRate,
sapIngQosSSummedCIR TruthValue
}
sapIngQosSName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapIngQosSName indicates the name of
the virtual scheduler whose parameters are to be
overridden."
::= { sapIngQosSchedInfoEntry 1 }
sapIngQosSRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosSRowStatus controls the creation
and deletion of rows in this table."
::= { sapIngQosSchedInfoEntry 2 }
sapIngQosSLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIngQosSLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row."
::= { sapIngQosSchedInfoEntry 3 }
sapIngQosSOverrideFlags OBJECT-TYPE
SYNTAX TVirtSchedAttribute
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosSOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this virtual scheduler. Clearing a
given flag will return the corresponding overridden
attribute to the value defined on the SAP's ingress
scheduler policy."
::= { sapIngQosSchedInfoEntry 4 }
sapIngQosSPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosSPIR specifies the desired
PIR value for this virtual scheduler."
DEFVAL { -1 }
::= { sapIngQosSchedInfoEntry 5 }
sapIngQosSCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosSCIR specifies the desired
CIR value for this virtual scheduler."
DEFVAL { -1 }
::= { sapIngQosSchedInfoEntry 6 }
sapIngQosSSummedCIR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapIngQosSSummedCIR specifies if the CIR
should be used as the summed CIR values of the children
schedulers or queues. If set to 'true', the applicable
scheduler CIR (sapIngQosSCIR) loses its meaning."
DEFVAL { true }
::= { sapIngQosSchedInfoEntry 7 }
-- ------------------------------------
-- SAP Egress QoS Scheduler Table
-- ------------------------------------
sapEgrQosSchedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosSchedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to override the base parameters
of a virtual scheduler, as defined in the associated
SAP egress scheduler policy."
::= { tmnxSapObjs 22 }
sapEgrQosSchedInfoEntry OBJECT-TYPE
SYNTAX SapEgrQosSchedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Override values for the specified SAP egress virtual
scheduler. These values override the corresponding
ones specified in the associated SAP egress scheduler
policy."
INDEX { svcId,
sapPortId,
sapEncapValue,
IMPLIED sapEgrQosSName }
::= { sapEgrQosSchedInfoTable 1 }
SapEgrQosSchedInfoEntry ::=
SEQUENCE {
sapEgrQosSName TNamedItem,
sapEgrQosSRowStatus RowStatus,
sapEgrQosSLastMgmtChange TimeStamp,
sapEgrQosSOverrideFlags TVirtSchedAttribute,
sapEgrQosSPIR TPIRRate,
sapEgrQosSCIR TCIRRate,
sapEgrQosSSummedCIR TruthValue
}
sapEgrQosSName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapEgrQosSName indicates the name of
the virtual scheduler whose parameters are to be
overridden."
::= { sapEgrQosSchedInfoEntry 1 }
sapEgrQosSRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosSRowStatus controls the creation
and deletion of rows in this table."
::= { sapEgrQosSchedInfoEntry 2 }
sapEgrQosSLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgrQosSLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row."
::= { sapEgrQosSchedInfoEntry 3 }
sapEgrQosSOverrideFlags OBJECT-TYPE
SYNTAX TVirtSchedAttribute
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosSOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this virtual scheduler. Clearing a
given flag will return the corresponding overridden
attribute to the value defined on the SAP's egress
scheduler policy."
::= { sapEgrQosSchedInfoEntry 4 }
sapEgrQosSPIR OBJECT-TYPE
SYNTAX TPIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosSPIR specifies the desired
PIR value for this virtual scheduler."
DEFVAL { -1 }
::= { sapEgrQosSchedInfoEntry 5 }
sapEgrQosSCIR OBJECT-TYPE
SYNTAX TCIRRate
UNITS "kilo bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosSCIR specifies the desired
CIR value for this virtual scheduler."
DEFVAL { -1 }
::= { sapEgrQosSchedInfoEntry 6 }
sapEgrQosSSummedCIR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapEgrQosSSummedCIR specifies if the CIR
should be used as the summed CIR values of the children
schedulers or queues. If set to 'true', the applicable
scheduler CIR (sapEgrQosSCIR) loses its meaning."
DEFVAL { true }
::= { sapEgrQosSchedInfoEntry 7 }
-- --------------------------------------
-- SAP Subscriber Management Table
-- --------------------------------------
sapSubMgmtInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapSubMgmtInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SAP subscriber management
information."
::= { tmnxSapObjs 23 }
sapSubMgmtInfoEntry OBJECT-TYPE
SYNTAX SapSubMgmtInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Subscriber management specific information about a SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapSubMgmtInfoTable 1 }
SapSubMgmtInfoEntry ::=
SEQUENCE {
sapSubMgmtAdminStatus TmnxEnabledDisabled,
sapSubMgmtDefSubProfile ServObjName,
sapSubMgmtDefSlaProfile ServObjName,
sapSubMgmtSubIdentPolicy ServObjName,
sapSubMgmtSubscriberLimit Unsigned32,
sapSubMgmtProfiledTrafficOnly TruthValue,
sapSubMgmtNonSubTrafficSubIdent DisplayString,
sapSubMgmtNonSubTrafficSubProf ServObjName,
sapSubMgmtNonSubTrafficSlaProf ServObjName,
sapSubMgmtMacDaHashing TruthValue,
sapSubMgmtDefSubIdent INTEGER,
sapSubMgmtDefSubIdentString DisplayString,
sapSubMgmtDefAppProfile ServObjName,
sapSubMgmtNonSubTrafficAppProf ServObjName
}
sapSubMgmtAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtAdminStatus specifies whether
enhanced subscriber management is enabled on this SAP."
DEFVAL { disabled }
::= { sapSubMgmtInfoEntry 1 }
sapSubMgmtDefSubProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtDefSubProfile specifies the default
subscriber profile applicable on this SAP. The
corresponding profile is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.
A value of 'default' is not allowed for this object."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 2 }
sapSubMgmtDefSlaProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtDefSlaProfile specifies the default
SLA profile applicable on this SAP. The corresponding
profile is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 3 }
sapSubMgmtSubIdentPolicy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtSubIdentPolicy specifies the
subscriber identification policy applicable on this SAP.
The corresponding policy is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 4 }
sapSubMgmtSubscriberLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtSubscriberLimit specifies the
maximum number of subscribers allowed for this SAP.
If the value is 0, there is no limit. Only if the value is
1, the 'single-sub-parameters' defined with objects
sapSubMgmtProfiledTrafficOnly,
sapSubMgmtNonSubTrafficSubProf and
sapSubMgmtNonSubTrafficSlaProf are meaningful."
DEFVAL { 1 }
::= { sapSubMgmtInfoEntry 5 }
sapSubMgmtProfiledTrafficOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtProfiledTrafficOnly specifies
whether only profiled traffic is applicable for this SAP.
If set to 'true', all SAP queues will be deleted.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1."
DEFVAL { false }
::= { sapSubMgmtInfoEntry 6 }
sapSubMgmtNonSubTrafficSubIdent OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtNonSubTrafficSubIdent specifies the
subscriber identification applicable on this SAP for all
non-subscriber traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 7 }
sapSubMgmtNonSubTrafficSubProf OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtNonSubTrafficSubProf specifies the
subscriber profile applicable on this SAP for all
non-subscriber traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 8 }
sapSubMgmtNonSubTrafficSlaProf OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtNonSubTrafficSlaProf specifies the
SLA profile applicable on this SAP for all non-subscriber
traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 9 }
sapSubMgmtMacDaHashing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG SAP has its egress LAG
link selected by a function of the MAC destination address
instead of subscriber id.
The value of this object is only meaningful if
sapSubMgmtAdminStatus is set to 'enabled' and can only
be configured for TLS services."
DEFVAL { false }
::= { sapSubMgmtInfoEntry 10 }
sapSubMgmtDefSubIdent OBJECT-TYPE
SYNTAX INTEGER {
useSapId (1),
useString (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtDefSubIdent specifies what is
used as the default subscriber identification applicable
on this SAP.
This value is used in case no other source (like Radius)
provides a subscriber identification string.
If the value of this objects is set to 'useSapId',
the SAP-id is used as the default subscriber identification
string. In this case, sapSubMgmtDefSubIdentString must
contain the empty string.
If the value of this object is set to 'useString',
the value of sapSubMgmtDefSubIdentString is used as the
default subscriber identification string. In this case,
an empty sapSubMgmtDefSubIdentString means that there is no
default subscriber identification configured."
DEFVAL { useString }
::= { sapSubMgmtInfoEntry 11 }
sapSubMgmtDefSubIdentString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtDefSubIdentString specifies the
default subscriber identification string applicable on
this SAP."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 12 }
sapSubMgmtDefAppProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtDefAppProfile specifies the default
application profile applicable on this SAP. The
corresponding profile is defined in
TIMETRA-BSX-MIB::tmnxBsxAppProfTable."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 13 }
sapSubMgmtNonSubTrafficAppProf OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of sapSubMgmtNonSubTrafficAppProf specifies the
application profile applicable on this SAP for all
non-subscriber traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { sapSubMgmtInfoEntry 14 }
-- -----------------------------------------
-- SAP TLS MSTI Table
-- -----------------------------------------
sapTlsMstiTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsMstiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains Multiple Spanning Tree Instance
information for the SAP. Each management VPLS running
MSTP can have upto 15 MSTI. An entry in this table is
automatically created when a tlsMstiEntry is created."
::= { tmnxSapObjs 24 }
sapTlsMstiEntry OBJECT-TYPE
SYNTAX SapTlsMstiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific MSTI for a SAP."
INDEX { svcId, sapPortId, sapEncapValue, tlsMstiInstanceId}
::= { sapTlsMstiTable 1 }
SapTlsMstiEntry ::=
SEQUENCE {
sapTlsMstiPriority Integer32,
sapTlsMstiPathCost INTEGER,
sapTlsMstiLastMgmtChange TimeStamp,
sapTlsMstiPortRole StpPortRole,
sapTlsMstiPortState TStpPortState,
sapTlsMstiDesignatedBridge BridgeId,
sapTlsMstiDesignatedPort Integer32
}
sapTlsMstiPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsMstiPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP and MSTI. As only the most
significant 4 bits of the value are used, the actual value
of this object is limited to multiples of 16: e.g. the
agent rounds down the value to one of: 0, 16, 32, .. ,
224, 240."
DEFVAL { 128 }
::= { sapTlsMstiEntry 1 }
sapTlsMstiPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapTlsMstiPathCost specifies the
contribution of this port to the MSTI path cost of paths
towards the spanning tree regional root which include this
port."
DEFVAL { 10 }
::= { sapTlsMstiEntry 2 }
sapTlsMstiLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMstiLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this SAP MSTI information."
::= { sapTlsMstiEntry 3 }
sapTlsMstiPortRole OBJECT-TYPE
SYNTAX StpPortRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sapTlsMstiPortRole indicates the current role of the
sap in the MSTI as defined by the Spanning Tree Protocol."
::= { sapTlsMstiEntry 4 }
sapTlsMstiPortState OBJECT-TYPE
SYNTAX TStpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMstiPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge has
detected a port that is malfunctioning it will
place that port into the 'broken' state."
::= { sapTlsMstiEntry 5 }
sapTlsMstiDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMstiDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment for this MSTI."
::= { sapTlsMstiEntry 6 }
sapTlsMstiDesignatedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapTlsMstiDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment for this MSTI."
::= { sapTlsMstiEntry 7 }
-- -------------------------------------
-- IPIPE SAP Table
-- -------------------------------------
sapIpipeInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIpipeInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains IPIPE specific SAP information."
::= { tmnxSapObjs 25 }
sapIpipeInfoEntry OBJECT-TYPE
SYNTAX SapIpipeInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPIPE specific information about a SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapIpipeInfoTable 1 }
SapIpipeInfoEntry ::=
SEQUENCE {
sapIpipeCeInetAddressType InetAddressType,
sapIpipeCeInetAddress InetAddress,
sapIpipeMacRefreshInterval Unsigned32,
sapIpipeMacAddress MacAddress,
sapIpipeArpedMacAddress MacAddress,
sapIpipeArpedMacAddressTimeout Unsigned32
}
sapIpipeCeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapIpipeCeInetAddressType
specifies the addresstype of the local end host IP
of an IPIPE."
::= { sapIpipeInfoEntry 1}
sapIpipeCeInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The type of this address is determined by the value of
the sapIpipeCeInetAddressType object.
This object specifies the IPv4 address of the
local end host of an IPIPE."
::= { sapIpipeInfoEntry 2 }
sapIpipeMacRefreshInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sapIpipeMacRefreshInterval specifies the interval
between successive attempts to refresh the MAC address of the CE
device associated with an Ethernet ipipe SAP. If no other event
(such as reception of an ARP request from the CE) occurs that
would refresh the MAC address before the end of the interval,
an ARP request will be originated from the IPIPE SAP."
DEFVAL { 14400 }
::= { sapIpipeInfoEntry 3 }
sapIpipeMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapIpipeMacAddress specifies
the MAC address of an IPIPE Ethernet SAP."
::= { sapIpipeInfoEntry 4 }
sapIpipeArpedMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIpipeArpedMacAddress indicates
the MAC address of the local end host."
::= { sapIpipeInfoEntry 5 }
sapIpipeArpedMacAddressTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIpipeArpedMacAddressTimeout
indicates the number of seconds to wait for the
sapIpipeArpedMacAddress to be re-refreshed."
::= { sapIpipeInfoEntry 6 }
-- -----------------------------------------
-- SAP Base ToD Monitoring Table
-- -----------------------------------------
sapTodMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTodMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains information on configurable objects
on SAP level, that can be modified by a scheduled policy."
::= { tmnxSapObjs 26 }
sapTodMonitorEntry OBJECT-TYPE
SYNTAX SapTodMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about ToD policy modifiable config data
for a SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapTodMonitorTable 1 }
SapTodMonitorEntry ::=
SEQUENCE {
sapCurrentIngressIpFilterId TFilterID,
sapCurrentIngressIpv6FilterId TFilterID,
sapCurrentIngressMacFilterId TFilterID,
sapCurrentIngressQosPolicyId TSapIngressPolicyID,
sapCurrentIngressQosSchedPlcy ServObjName,
sapCurrentEgressIpFilterId TFilterID,
sapCurrentEgressIpv6FilterId TFilterID,
sapCurrentEgressMacFilterId TFilterID,
sapCurrentEgressQosPolicyId TSapEgressPolicyID,
sapCurrentEgressQosSchedPlcy ServObjName,
sapIntendedIngressIpFilterId TFilterID,
sapIntendedIngressIpv6FilterId TFilterID,
sapIntendedIngressMacFilterId TFilterID,
sapIntendedIngressQosPolicyId TSapIngressPolicyID,
sapIntendedIngressQosSchedPlcy ServObjName,
sapIntendedEgressIpFilterId TFilterID,
sapIntendedEgressIpv6FilterId TFilterID,
sapIntendedEgressMacFilterId TFilterID,
sapIntendedEgressQosPolicyId TSapEgressPolicyID,
sapIntendedEgressQosSchedPlcy ServObjName
}
sapCurrentIngressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentIngressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the ingress filter applied on this SAP, or zero if no
filter is currently active.
The active filter may deviate from sapIngressIpFilterId in
case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 1 }
sapCurrentIngressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentIngressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the ingress Ipv6 filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapIngressIpv6FilterId
in case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 2 }
sapCurrentIngressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentIngressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the ingress Mac filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapIngressMacFilterId
in case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 3 }
sapCurrentIngressQosPolicyId OBJECT-TYPE
SYNTAX TSapIngressPolicyID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentIngressQosPolicyId
indicates the index in the tSapIngressTable corresponding
to the ingress Qos Policy applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapIngressQosPolicyId
in case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 4 }
sapCurrentIngressQosSchedPlcy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentIngressQosSchedPlcy
indicates the ingress QoS scheduler on this SAP, or zero
if none is currently active.
The active policy may deviate from
sapIngressQosSchedulerPolicy in case it is overruled by a
ToD Suite policy defined on this SAP, or on the
multi-service this SAP belongs to. "
::= { sapTodMonitorEntry 5 }
sapCurrentEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentEgressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the Egress filter applied on this SAP, or zero if no
filter is currently active.
The active filter may deviate from sapEgressIpFilterId in
case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 6 }
sapCurrentEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentEgressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the Egress Ipv6 filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapEgressIpv6FilterId
in case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 7 }
sapCurrentEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentEgressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the Egress Mac filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapEgressMacFilterId in
case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 8 }
sapCurrentEgressQosPolicyId OBJECT-TYPE
SYNTAX TSapEgressPolicyID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentEgressQosPolicyId
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Policy applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapEgressQosPolicyId in
case it is overruled by a ToD Suite policy."
::= { sapTodMonitorEntry 9 }
sapCurrentEgressQosSchedPlcy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCurrentEgressQosSchedPlcy
indicates the Egress QoS scheduler on this SAP, or zero if
none is currently active.
The active policy may deviate from
sapEgressQosSchedulerPolicy in case it is overruled by a
ToD Suite policy defined on this SAP, or on the
multi-customer this SAP belongs to."
::= { sapTodMonitorEntry 10 }
sapIntendedIngressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedIngressIpFilterId
indicates the index in the tIPFilterTable corresponding
to the ingress IP filter that should be applied on
this SAP.
If it deviates from sapCurrentIngressIpFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites
for the SAP. When the ToD Suites decides that a new
filter must be applied, it will try to do this. If it
fails, the current and intended field are not equal."
::= { sapTodMonitorEntry 11 }
sapIntendedIngressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedIngressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the ingress Ipv6 filter that should be applied on this
SAP.
If it deviates from sapCurrentIngressIpv6FilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites
for the SAP. When the ToD Suites decides that a new
filter must be applied, it will try to do this. If it
fails, the current and intended field are not equal."
::= { sapTodMonitorEntry 12 }
sapIntendedIngressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedIngressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the ingress Mac filter that should be applied
on this SAP.
If it deviates from sapCurrentIngressMacFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 13 }
sapIntendedIngressQosPolicyId OBJECT-TYPE
SYNTAX TSapIngressPolicyID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedIngressQosPolicyId
indicates the index in the tSapIngressTable corresponding
to the ingress Qos policy that should be applied
on this SAP.
If it deviates from sapCurrentIngressQosPolicyId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails, the
current and intended field are not equal."
::= { sapTodMonitorEntry 14 }
sapIntendedIngressQosSchedPlcy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedIngressQosSchedPlcy
indicates the ingress QoS scheduler that should be applied
on this SAP.
If it deviates from sapCurrentIngressQosSchedPlcy, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 15 }
sapIntendedEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedEgressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the Egress IP filter scheduler that should be applied on
this SAP.
If it deviates from sapCurrentEgressIpFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 16 }
sapIntendedEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedEgressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the Egress IPv6 filter scheduler that should be applied
on this SAP.
If it deviates from sapCurrentEgressIpv6FilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 17 }
sapIntendedEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedEgressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the Egress mac filter scheduler that should be applied
on this SAP.
If it deviates from sapCurrentEgressMacFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 18 }
sapIntendedEgressQosPolicyId OBJECT-TYPE
SYNTAX TSapEgressPolicyID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedEgressQosPolicyId
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Policy that should be applied
on this SAP.
If it deviates from sapCurrentEgressQosPolicyId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 19 }
sapIntendedEgressQosSchedPlcy OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIntendedEgressQosSchedPlcy
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Scheduler policy that should be applied
on this SAP.
If it deviates from sapCurrentEgressQosSchedPlcy, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal."
::= { sapTodMonitorEntry 20 }
-- -------------------------------------------------
-- SAP Ingress Qos queue stats per Qos policy
-- -------------------------------------------------
sapIngrQosPlcyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngrQosPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains Ingress Qos policy related
statistics for a SAP."
::= { tmnxSapObjs 27 }
sapIngrQosPlcyStatsEntry OBJECT-TYPE
SYNTAX SapIngrQosPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics about a specific Ingress Qos Policy applied
on a specific SAP."
INDEX { svcId, sapPortId, sapEncapValue, sapIgQosPlcyId }
::= { sapIngrQosPlcyStatsTable 1 }
SapIngrQosPlcyStatsEntry ::=
SEQUENCE {
sapIgQosPlcyId TSapIngressPolicyID,
sapIgQosPlcyDroppedHiPrioPackets Counter64,
sapIgQosPlcyDroppedHiPrioOctets Counter64,
sapIgQosPlcyDroppedLoPrioPackets Counter64,
sapIgQosPlcyDroppedLoPrioOctets Counter64,
sapIgQosPlcyForwardedInProfPackets Counter64,
sapIgQosPlcyForwardedInProfOctets Counter64,
sapIgQosPlcyForwardedOutProfPackets Counter64,
sapIgQosPlcyForwardedOutProfOctets Counter64
}
sapIgQosPlcyId OBJECT-TYPE
SYNTAX TSapIngressPolicyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyId indicates
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified."
::= { sapIngrQosPlcyStatsEntry 1 }
sapIgQosPlcyDroppedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyDroppedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapIngrQosPlcyStatsEntry 2 }
sapIgQosPlcyDroppedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyDroppedHiPrioOctets
indicates the number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapIngrQosPlcyStatsEntry 3 }
sapIgQosPlcyDroppedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyDroppedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapIngrQosPlcyStatsEntry 4 }
sapIgQosPlcyDroppedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyDroppedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapIngrQosPlcyStatsEntry 5 }
sapIgQosPlcyForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Qchip."
::= { sapIngrQosPlcyStatsEntry 6 }
sapIgQosPlcyForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Qchip."
::= { sapIngrQosPlcyStatsEntry 7 }
sapIgQosPlcyForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Qchip."
::= { sapIngrQosPlcyStatsEntry 8 }
sapIgQosPlcyForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Qchip."
::= { sapIngrQosPlcyStatsEntry 9 }
-- -------------------------------------------------
-- SAP Egress Qos queue stats per Qos policy
-- -------------------------------------------------
sapEgrQosPlcyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains Egress Qos policy related
statistics for a SAP."
::= { tmnxSapObjs 28 }
sapEgrQosPlcyStatsEntry OBJECT-TYPE
SYNTAX SapEgrQosPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics about a specific Egress Qos Policy applied
on a specific SAP."
INDEX { svcId, sapPortId, sapEncapValue, sapEgQosPlcyId }
::= { sapEgrQosPlcyStatsTable 1 }
SapEgrQosPlcyStatsEntry ::=
SEQUENCE {
sapEgQosPlcyId TSapEgressPolicyID,
sapEgQosPlcyDroppedInProfPackets Counter64,
sapEgQosPlcyDroppedInProfOctets Counter64,
sapEgQosPlcyDroppedOutProfPackets Counter64,
sapEgQosPlcyDroppedOutProfOctets Counter64,
sapEgQosPlcyForwardedInProfPackets Counter64,
sapEgQosPlcyForwardedInProfOctets Counter64,
sapEgQosPlcyForwardedOutProfPackets Counter64,
sapEgQosPlcyForwardedOutProfOctets Counter64
}
sapEgQosPlcyId OBJECT-TYPE
SYNTAX TSapEgressPolicyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyId indicates
the row index in the tSapEgressTable corresponding to this
egress QoS policy, or one if no policy is specified."
::= { sapEgrQosPlcyStatsEntry 1 }
sapEgQosPlcyDroppedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyDroppedInProfPackets
indicates the number of in-profile packets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapEgrQosPlcyStatsEntry 2 }
sapEgQosPlcyDroppedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyDroppedInProfOctets
indicates the number of in-profile octets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapEgrQosPlcyStatsEntry 3 }
sapEgQosPlcyDroppedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyDroppedOutProfPackets
indicates the number of out-profile packets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapEgrQosPlcyStatsEntry 4 }
sapEgQosPlcyDroppedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyDroppedOutProfOctets
indicates the number of out-profile octets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc."
::= { sapEgrQosPlcyStatsEntry 5 }
sapEgQosPlcyForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyStatsEntry 6 }
sapEgQosPlcyForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyStatsEntry 7 }
sapEgQosPlcyForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyStatsEntry 8 }
sapEgQosPlcyForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyStatsEntry 9 }
-- ------------------------------------------
-- Ingress QoS Plcy Queue SAP Statistics Table
-- ------------------------------------------
sapIngQosPlcyQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngQosPlcyQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue SAP
statistics, per Ingress QoS Policy the queue
was used by."
::= { tmnxSapObjs 29 }
sapIngQosPlcyQueueStatsEntry OBJECT-TYPE
SYNTAX SapIngQosPlcyQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ingress statistics about a specific SAP's
QoS queue for a given Qos policy."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapIgQosPlcyQueuePlcyId,
sapIgQosPlcyQueueId }
::= { sapIngQosPlcyQueueStatsTable 1 }
SapIngQosPlcyQueueStatsEntry ::=
SEQUENCE {
sapIgQosPlcyQueuePlcyId TSapIngressPolicyID,
sapIgQosPlcyQueueId TSapIngQueueId,
sapIgQosPlcyQueueStatsOfferedHiPrioPackets Counter64,
sapIgQosPlcyQueueStatsDroppedHiPrioPackets Counter64,
sapIgQosPlcyQueueStatsOfferedLoPrioPackets Counter64,
sapIgQosPlcyQueueStatsDroppedLoPrioPackets Counter64,
sapIgQosPlcyQueueStatsOfferedHiPrioOctets Counter64,
sapIgQosPlcyQueueStatsDroppedHiPrioOctets Counter64,
sapIgQosPlcyQueueStatsOfferedLoPrioOctets Counter64,
sapIgQosPlcyQueueStatsDroppedLoPrioOctets Counter64,
sapIgQosPlcyQueueStatsForwardedInProfPackets Counter64,
sapIgQosPlcyQueueStatsForwardedOutProfPackets Counter64,
sapIgQosPlcyQueueStatsForwardedInProfOctets Counter64,
sapIgQosPlcyQueueStatsForwardedOutProfOctets Counter64,
sapIgQosPlcyQueueCustId TmnxCustId,
sapIgQosPlcyQueueStatsUncoloredPacketsOffered Counter64,
sapIgQosPlcyQueueStatsUncoloredOctetsOffered Counter64
}
sapIgQosPlcyQueuePlcyId OBJECT-TYPE
SYNTAX TSapIngressPolicyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyQueuePlcyId indicates
the row index in the tSapIngressTable corresponding to
this ingress QoS policy."
::= { sapIngQosPlcyQueueStatsEntry 1 }
sapIgQosPlcyQueueId OBJECT-TYPE
SYNTAX TSapIngQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the ingress QoS queue of this SAP used by the
policy indicated by sapIgQosPlcyQueuePlcyId."
::= { sapIngQosPlcyQueueStatsEntry 2 }
sapIgQosPlcyQueueStatsOfferedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip."
::= { sapIngQosPlcyQueueStatsEntry 3 }
sapIgQosPlcyQueueStatsDroppedHiPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosPlcyQueueStatsEntry 4 }
sapIgQosPlcyQueueStatsOfferedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip."
::= { sapIngQosPlcyQueueStatsEntry 5 }
sapIgQosPlcyQueueStatsDroppedLoPrioPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosPlcyQueueStatsEntry 6 }
sapIgQosPlcyQueueStatsOfferedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets
indicates the number of high priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip."
::= { sapIngQosPlcyQueueStatsEntry 7 }
sapIgQosPlcyQueueStatsDroppedHiPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets
indicates the number ofhigh priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosPlcyQueueStatsEntry 8 }
sapIgQosPlcyQueueStatsOfferedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip."
::= { sapIngQosPlcyQueueStatsEntry 9 }
sapIgQosPlcyQueueStatsDroppedLoPrioOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapIngQosPlcyQueueStatsEntry 10 }
sapIgQosPlcyQueueStatsForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Qchip."
::= { sapIngQosPlcyQueueStatsEntry 11 }
sapIgQosPlcyQueueStatsForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Qchip."
::= { sapIngQosPlcyQueueStatsEntry 12 }
sapIgQosPlcyQueueStatsForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Qchip."
::= { sapIngQosPlcyQueueStatsEntry 13 }
sapIgQosPlcyQueueStatsForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Qchip."
::= { sapIngQosPlcyQueueStatsEntry 14 }
sapIgQosPlcyQueueCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapIgQosPlcyQueueCustId
indicates the Customer ID for the associated service."
::= { sapIngQosPlcyQueueStatsEntry 15 }
sapIgQosPlcyQueueStatsUncoloredPacketsOffered OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered
indicates the number of uncolored packets offered to
the ingress Qchip."
::= { sapIngQosPlcyQueueStatsEntry 16 }
sapIgQosPlcyQueueStatsUncoloredOctetsOffered OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered
indicates the number of uncolored octets offered to
the ingress Qchip."
::= { sapIngQosPlcyQueueStatsEntry 17 }
-- ------------------------------------------
-- Egress QoS Plcy Queue SAP Statistics Table
-- ------------------------------------------
sapEgrQosPlcyQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrQosPlcyQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains egress QoS queue SAP
statistics per Egress QoS Policy the queue
was used by."
::= { tmnxSapObjs 30 }
sapEgrQosPlcyQueueStatsEntry OBJECT-TYPE
SYNTAX SapEgrQosPlcyQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Egress statistics about a specific SAP's
QoS queue for a given Qos policy."
INDEX { svcId,
sapPortId,
sapEncapValue,
sapEgQosPlcyQueuePlcyId,
sapEgQosPlcyQueueId }
::= { sapEgrQosPlcyQueueStatsTable 1 }
SapEgrQosPlcyQueueStatsEntry ::=
SEQUENCE {
sapEgQosPlcyQueuePlcyId TSapEgressPolicyID,
sapEgQosPlcyQueueId TSapEgrQueueId,
sapEgQosPlcyQueueStatsForwardedInProfPackets Counter64,
sapEgQosPlcyQueueStatsDroppedInProfPackets Counter64,
sapEgQosPlcyQueueStatsForwardedOutProfPackets Counter64,
sapEgQosPlcyQueueStatsDroppedOutProfPackets Counter64,
sapEgQosPlcyQueueStatsForwardedInProfOctets Counter64,
sapEgQosPlcyQueueStatsDroppedInProfOctets Counter64,
sapEgQosPlcyQueueStatsForwardedOutProfOctets Counter64,
sapEgQosPlcyQueueStatsDroppedOutProfOctets Counter64,
sapEgQosPlcyQueueCustId TmnxCustId
}
sapEgQosPlcyQueuePlcyId OBJECT-TYPE
SYNTAX TSapEgressPolicyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row index in the tSapEgressTable
corresponding to this egress QoS policy."
::= { sapEgrQosPlcyQueueStatsEntry 1 }
sapEgQosPlcyQueueId OBJECT-TYPE
SYNTAX TSapEgrQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueId indicates
index of the egress QoS queue of this SAP."
::= { sapEgrQosPlcyQueueStatsEntry 2 }
sapEgQosPlcyQueueStatsForwardedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedInProfPackets
indicates the number of in-profile packets (rate below
CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyQueueStatsEntry 3 }
sapEgQosPlcyQueueStatsDroppedInProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedInProfPackets
indicates the number of in-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosPlcyQueueStatsEntry 4 }
sapEgQosPlcyQueueStatsForwardedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedOutProfPackets
indicates the number of out-of-profile packets (rate
above CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyQueueStatsEntry 5 }
sapEgQosPlcyQueueStatsDroppedOutProfPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedOutProfPackets
indicates the number out-of-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosPlcyQueueStatsEntry 6 }
sapEgQosPlcyQueueStatsForwardedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedInProfOctets
indicates the number ofin-profile octets (rate below CIR)
forwarded by the egress Qchip."
::= { sapEgrQosPlcyQueueStatsEntry 7 }
sapEgQosPlcyQueueStatsDroppedInProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedInProfOctets
indicates the number in-profile octets discarded by the
egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosPlcyQueueStatsEntry 8 }
sapEgQosPlcyQueueStatsForwardedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsForwardedOutProfOctets
indicates the number of out-of-profile octets (rate
above CIR) forwarded by the egress Qchip."
::= { sapEgrQosPlcyQueueStatsEntry 9 }
sapEgQosPlcyQueueStatsDroppedOutProfOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgQosPlcyQueueStatsDroppedOutProfOctets
indicates the number out-of-profile octets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc."
::= { sapEgrQosPlcyQueueStatsEntry 10 }
sapEgQosPlcyQueueCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapEgQosPlcyQueueCustId indicates
the Customer ID for the associated service."
::= { sapEgrQosPlcyQueueStatsEntry 11 }
-- ----------------------------------------
-- SAP DHCP Information Table
-- ----------------------------------------
sapDhcpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "sapDhcpInfoTable contains DHCP information related to a
routed CO subscriber SAP. This table complements
sapBaseInfoTable, and contains an entry for each
routed CO subscriber SAP. Rows in this table
are created and deleted automatically by the system."
::= { tmnxSapObjs 31 }
sapDhcpInfoEntry OBJECT-TYPE
SYNTAX SapDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCP specific information for a routed CO subscriber SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapDhcpInfoTable 1 }
SapDhcpInfoEntry ::=
SEQUENCE {
sapDhcpOperLeasePopulate Unsigned32
}
sapDhcpOperLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapDhcpOperLeasePopulate
indicates the number of DHCP lease states currently
allocated on this SAP."
::= { sapDhcpInfoEntry 1 }
-- -------------------------------------------------
-- SAP Ingress QoS Scheduler Per-Policy Statistics Table
-- -------------------------------------------------
sapIngSchedPlcyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngSchedPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains ingress QoS queue
statistics for the SAP's, organized by
scheduler policy."
::= { tmnxSapObjs 32 }
sapIngSchedPlcyStatsEntry OBJECT-TYPE
SYNTAX SapIngSchedPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics about a specific SAP's ingress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies."
INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName,
IMPLIED sapIngQosSchedName }
::= { sapIngSchedPlcyStatsTable 1 }
SapIngSchedPlcyStatsEntry ::=
SEQUENCE {
sapIngSchedPlcyStatsFwdPkt Counter64,
sapIngSchedPlcyStatsFwdOct Counter64
}
sapIngSchedPlcyStatsFwdPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip."
::= { sapIngSchedPlcyStatsEntry 1 }
sapIngSchedPlcyStatsFwdOct OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of forwarded octets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip."
::= { sapIngSchedPlcyStatsEntry 2 }
-- ---------------------------------------------
-- SAP Egress QoS Scheduler Per-Policy Statistics Table
-- ---------------------------------------------
sapEgrSchedPlcyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrSchedPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains egress QoS scheduler
statistics for the SAP's, organized by
scheduler policy."
::= { tmnxSapObjs 33 }
sapEgrSchedPlcyStatsEntry OBJECT-TYPE
SYNTAX SapEgrSchedPlcyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics about a specific SAP's egress QoS scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies."
INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName,
IMPLIED sapEgrQosSchedName }
::= { sapEgrSchedPlcyStatsTable 1 }
SapEgrSchedPlcyStatsEntry ::=
SEQUENCE {
sapEgrSchedPlcyStatsFwdPkt Counter64,
sapEgrSchedPlcyStatsFwdOct Counter64
}
sapEgrSchedPlcyStatsFwdPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets forwarded by the
egress Qchip, as determined by the SAP
egress scheduler policy."
::= { sapEgrSchedPlcyStatsEntry 1 }
sapEgrSchedPlcyStatsFwdOct OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets forwarded by the
egress Qchip, as determined by the SAP
egress scheduler policy."
::= { sapEgrSchedPlcyStatsEntry 2 }
-- --------------------------------------------
-- SAP Ingress QoS Scheduler Per-Policy Statistics Table
-- with specific Port ID
-- --------------------------------------------
sapIngSchedPlcyPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapIngSchedPlcyPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sapIngSchedPlcyPortStatsTable contains
ingress QoS scheduler statistics for the SAP's, organized per
scheduler policy and per port. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies."
::= { tmnxSapObjs 34 }
sapIngSchedPlcyPortStatsEntry OBJECT-TYPE
SYNTAX SapIngSchedPlcyPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics about a specific SAP's ingress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies."
INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName,
tVirtualSchedulerName, sapPortIdIngPortId }
::= { sapIngSchedPlcyPortStatsTable 1 }
SapIngSchedPlcyPortStatsEntry ::=
SEQUENCE {
sapIngSchedPlcyPortStatsPort TmnxPortID,
sapIngSchedPlcyPortStatsFwdPkt Counter64,
sapIngSchedPlcyPortStatsFwdOct Counter64
}
sapIngSchedPlcyPortStatsPort OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only -- not-accessible
STATUS current
DESCRIPTION "The value of sapIngSchedPlcyPortStatsPort is used
as an index of the ingress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied."
::= {sapIngSchedPlcyPortStatsEntry 1 }
sapIngSchedPlcyPortStatsFwdPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIngSchedPlcyPortStatsFwdPkt indicates
the number of forwarded packets, as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapIngSchedPlcyPortStatsEntry 2 }
sapIngSchedPlcyPortStatsFwdOct OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapIngSchedPlcyPortStatsFwdOct indicates
the number of forwarded octets,as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapIngSchedPlcyPortStatsEntry 3 }
-- ------------------------------------------------------------
-- SAP Egress QoS Scheduler Per-Policy Statistics Table
-- with specific Port ID
-- ------------------------------------------------------------
sapEgrSchedPlcyPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEgrSchedPlcyPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sapEgrSchedPlcyPortStatsTable contains
egress QoS scheduler statistics for the SAP's, organized per
scheduler policy and per port. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies."
::= { tmnxSapObjs 35 }
sapEgrSchedPlcyPortStatsEntry OBJECT-TYPE
SYNTAX SapEgrSchedPlcyPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics about a specific SAP's egress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies."
INDEX { svcId, sapPortId, sapEncapValue, tSchedulerPolicyName,
tVirtualSchedulerName, sapPortIdEgrPortId }
::= { sapEgrSchedPlcyPortStatsTable 1 }
SapEgrSchedPlcyPortStatsEntry ::=
SEQUENCE {
sapEgrSchedPlcyPortStatsPort TmnxPortID,
sapEgrSchedPlcyPortStatsFwdPkt Counter64,
sapEgrSchedPlcyPortStatsFwdOct Counter64
}
sapEgrSchedPlcyPortStatsPort OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-only -- not-accessible
STATUS current
DESCRIPTION "The value of sapEgrSchedPlcyPortStatsPort is used
as an index of the egress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied."
::= {sapEgrSchedPlcyPortStatsEntry 1 }
sapEgrSchedPlcyPortStatsFwdPkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgrSchedPlcyPortStatsFwdPkt indicates
the number of forwarded packets, as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapEgrSchedPlcyPortStatsEntry 2 }
sapEgrSchedPlcyPortStatsFwdOct OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapEgrSchedPlcyPortStatsFwdOct indicates
the number of forwarded octets,as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip."
::= { sapEgrSchedPlcyPortStatsEntry 3 }
-- ---------------------------------------------------------------------
-- CEM SAP Information Table
--
-- Sparse Dependent Extention of the sapBaseInfoTable.
--
-- The same indexes are used for both the base table, sapBaseInfoTable,
-- and the sparse dependent table, sapCemInfoTable.
--
-- This in effect extends the sapBaseInfoTable with additional columns.
-- Rows are created in the sapCemInfoTable only for those entries
-- in the sapBaseInfoTable that are created on a port with 'cemEncap'
-- encapsulation.
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the sapCemInfoTable.
-- ---------------------------------------------------------------------
sapCemInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapCemInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains CEM SAP information."
::= { tmnxSapObjs 40 }
sapCemInfoEntry OBJECT-TYPE
SYNTAX SapCemInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific CEM SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapCemInfoTable 1 }
SapCemInfoEntry ::=
SEQUENCE {
sapCemLastMgmtChange TimeStamp,
sapCemEndpointType INTEGER,
sapCemBitrate Unsigned32,
sapCemCasTrunkFraming TdmOptionsCasTrunkFraming,
sapCemPayloadSize Unsigned32,
sapCemJitterBuffer Unsigned32,
sapCemUseRtpHeader TruthValue,
sapCemDifferential TruthValue,
sapCemTimestampFreq Unsigned32,
sapCemReportAlarm CemSapReportAlarm,
sapCemReportAlarmStatus CemSapReportAlarm,
sapCemLocalEcid CemSapEcid,
sapCemRemoteMacAddr MacAddress,
sapCemRemoteEcid CemSapEcid
}
sapCemLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the object sapCemLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this CEM SAP information."
::= { sapCemInfoEntry 1 }
sapCemEndpointType OBJECT-TYPE
SYNTAX INTEGER {
unstructuredE1 (1),
unstructuredT1 (2),
unstructuredE3 (3),
unstructuredT3 (4),
nxDS0 (5),
nxDS0WithCas (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the CEM SAP endpoint type."
::= { sapCemInfoEntry 2 }
sapCemBitrate OBJECT-TYPE
SYNTAX Unsigned32 (0..699)
UNITS "64 Kbits/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the bit-rate in multiples of
64 Kbit/s of the CEM SAP."
::= { sapCemInfoEntry 3 }
sapCemCasTrunkFraming OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the CAS trunk framing mode of
the CEM SAP."
::= { sapCemInfoEntry 4 }
sapCemPayloadSize OBJECT-TYPE
SYNTAX Unsigned32 (0|16..2048)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the payload size (in bytes) of
packets transmitted to the Packet Service Network (PSN)
by the CEM SAP. This determines the size of the data
that will be transmitted over the service. As well,
if the size of the data received is not consistent with
the payload size then the packet is considered malformed.
Default value depends on the CEM SAP endpoint type
(sapCemEndpointType), and if applicable, the number of
timeslots (sapCemBitrate):
---------------------------------------------------------
| Endpoint Type | Timeslots | Default payload size |
---------------------+-----------+-----------------------
| 'unstructuredE1' | n/a | 256 bytes |
---------------------+-----------+-----------------------
| 'unstructuredT1' | n/a | 192 bytes |
---------------------+-----------+-----------------------
| 'unstructuredE3' | n/a | 1024 bytes |
---------------------+-----------+-----------------------
| 'unstructuredT3' | n/a | 1024 bytes |
---------------------+-----------+-----------------------
| 'nxDS0' (E1/T1) | N = 1 | 64 bytes |
| +-----------+-----------------------
| | N = 2..4 | N x 32 bytes |
| +-----------+-----------------------
| | N = 5..15 | N x 16 bytes |
| +-----------+-----------------------
| | N >= 16 | N x 8 bytes |
---------------------+-----------+-----------------------
| 'nxDS0WithCas' (E1)| N | N x 16 bytes |
---------------------+-----------+-----------------------
| 'nxDS0WithCas' (T1)| N | N x 24 bytes |
---------------------------------------------------------
For all endpoint types except for 'nxDS0WithCas',
valid payload size range is from the default (in the
table above) to 2048 bytes.
For 'nxDS0WithCas', sapCemPayloadSize divide by the
number of timeslots (sapCemBitrate) must be an integer
factor of the number of frames per trunk multiframe (i.e.
16 for E1 trunk and 24 for T1 trunk).
For '1xDS0', sapCemPayloadSize must be a multiple of 2.
For 'NxDS0', where N > 1, sapCemPayloadSize must be a
multiple of the number of timeslots (sapCemBitrate).
For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3'
and 'unstructuredT3', sapCemPayloadSize must be a
multiple of 32 bytes.
Configuring sapCemPayloadSize and sapCemJitterBuffer to
values that result in less than 2 packet buffers or
greater than 32 packet buffer is not allowed.
Setting this object to 0 sets it back to the default
value."
::= { sapCemInfoEntry 5 }
sapCemJitterBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0|1..250)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies the jitter buffer size in
milliseconds (ms).
Default value depends on the CEM SAP endpoint type
(sapCemEndpointType), and if applicable, the number of
timeslots (sapCemBitrate):
---------------------------------------------------------
| Endpoint Type | Timeslots | Default jitter buf. |
---------------------+-----------+-----------------------
| 'unstructuredE1' | n/a | 5 ms |
---------------------+-----------+-----------------------
| 'unstructuredT1' | n/a | 5 ms |
---------------------+-----------+-----------------------
| 'unstructuredE3' | n/a | 5 ms |
---------------------+-----------+-----------------------
| 'unstructuredT3' | n/a | 5 ms |
---------------------+-----------+-----------------------
| 'nxDS0' (E1/T1) | N = 1 | 32 ms |
| +-----------+-----------------------
| | N = 2..4 | 16 ms |
| +-----------+-----------------------
| | N = 5..15 | 8 ms |
| +-----------+-----------------------
| | N >= 16 | 5 ms |
---------------------+-----------+-----------------------
| 'nxDS0WithCas' (E1)| N | 8 ms |
---------------------+-----------+-----------------------
| 'nxDS0WithCas' (T1)| N | 12 ms |
---------------------------------------------------------
Configuring sapCemPayloadSize and sapCemJitterBuffer to
values that result in less than 2 packet buffers or
greater than 32 packet buffers is not allowed.
The valid range is 1 to 250 ms. Setting this object
to 0 sets it back to the default value."
::= { sapCemInfoEntry 6 }
sapCemUseRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object specifies whether a RTP header is used when
packets are transmitted to the Packet Service Network
(PSN) by the CEM SAP."
DEFVAL { false }
::= { sapCemInfoEntry 7 }
sapCemDifferential OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies whether this CEM SAP is in
differential mode."
::= { sapCemInfoEntry 8 }
sapCemTimestampFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies whether the value of the timestamp
frequency in multiples of 8 KHz for this CEM SAP."
::= { sapCemInfoEntry 9 }
sapCemReportAlarm OBJECT-TYPE
SYNTAX CemSapReportAlarm
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sapCemReportAlarm determines when and if to
generate notifications for the CEM SAP."
DEFVAL { {strayPkts, malformedPkts, pktLoss, bfrOverrun, bfrUnderrun} }
::= { sapCemInfoEntry 10 }
sapCemReportAlarmStatus OBJECT-TYPE
SYNTAX CemSapReportAlarm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapCemReportAlarmStatus indicates the current
alarms on this CEM SAP."
::= { sapCemInfoEntry 11 }
sapCemLocalEcid OBJECT-TYPE
SYNTAX CemSapEcid
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapCemLocalEcid specifies
the local ECID.
Only valid if CEM SAP belongs to an EPIPE service."
DEFVAL { 0 }
::= { sapCemInfoEntry 12 }
sapCemRemoteMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapCemRemoteMacAddr specifies
the remote MAC address.
Only valid if CEM SAP belongs to an EPIPE service."
DEFVAL { '000000000000'h }
::= { sapCemInfoEntry 13 }
sapCemRemoteEcid OBJECT-TYPE
SYNTAX CemSapEcid
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the object sapCemRemoteEcid specifies
the remote ECID.
Only valid if CEM SAP belongs to an EPIPE service."
DEFVAL { 0 }
::= { sapCemInfoEntry 14 }
-- ---------------------------------------------------------------------
-- CEM SAP Statistics Table
--
--
-- Sparse Dependent Extention of the sapBaseInfoTable.
--
-- The same indexes are used for both the base table, sapBaseInfoTable,
-- and the sparse dependent table, sapCemStatsTable.
--
-- This in effect extends the sapBaseInfoTable with additional columns.
-- Rows are created in the sapCemStatsTable only for those entries
-- in the sapBaseInfoTable that are created on a port that 'cemEncap' set
-- for port encapsulation.
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the sapCemStatsTable.
-- ---------------------------------------------------------------------
sapCemStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapCemStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains CEM SAP statistics."
::= { tmnxSapObjs 41 }
sapCemStatsEntry OBJECT-TYPE
SYNTAX SapCemStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics for a specific CEM SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapCemStatsTable 1 }
SapCemStatsEntry ::=
SEQUENCE {
sapCemStatsIngressForwardedPkts Counter32,
sapCemStatsIngressDroppedPkts Counter32,
sapCemStatsEgressForwardedPkts Counter32,
sapCemStatsEgressDroppedPkts Counter32,
sapCemStatsEgressMissingPkts Counter32,
sapCemStatsEgressPktsReOrder Counter32,
sapCemStatsEgressJtrBfrUnderruns Counter32,
sapCemStatsEgressJtrBfrOverruns Counter32,
sapCemStatsEgressMisOrderDropped Counter32,
sapCemStatsEgressMalformedPkts Counter32,
sapCemStatsEgressLBitDropped Counter32,
sapCemStatsEgressMultipleDropped Counter32,
sapCemStatsEgressESs Counter32,
sapCemStatsEgressSESs Counter32,
sapCemStatsEgressUASs Counter32,
sapCemStatsEgressFailureCounts Counter32,
sapCemStatsEgressUnderrunCounts Counter32,
sapCemStatsEgressOverrunCounts Counter32
}
sapCemStatsIngressForwardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsIngressForwardedPkts indicates
the number of packets that were successfully forwarded."
::= { sapCemStatsEntry 1 }
sapCemStatsIngressDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsIngressDroppedPkts indicates
the total number of packets that were dropped due to
errors."
::= { sapCemStatsEntry 2 }
sapCemStatsEgressForwardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressForwardedPkts indicates the
number of packets that were successfully forwarded."
::= { sapCemStatsEntry 3 }
sapCemStatsEgressDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressDroppedPkts indicates
the total number of packets that were dropped due to
errors."
::= { sapCemStatsEntry 4 }
sapCemStatsEgressMissingPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressMissingPkts indicates the
number of missing packets (as detected via control word
sequence number gaps)."
::= { sapCemStatsEntry 5 }
sapCemStatsEgressPktsReOrder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressPktsReOrder indicates the
number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered."
::= { sapCemStatsEntry 6 }
sapCemStatsEgressJtrBfrUnderruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressJtrBfrUnderruns indicates
the number of times a packet needed to be played out and
the jitter buffer was empty."
::= { sapCemStatsEntry 7 }
sapCemStatsEgressJtrBfrOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressJtrBfrOverruns indicates
the number of times a packet was dropped because it could
not fit in the jitter buffer."
::= { sapCemStatsEntry 8 }
sapCemStatsEgressMisOrderDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressMisOrderDropped indicates
the number of packets detected out of order (via control
word sequence numbers), and could not be re-ordered, or
could not be placed in the jitter buffer because it was
out of the current window."
::= { sapCemStatsEntry 9 }
sapCemStatsEgressMalformedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressMalformedPkts indicates the
number of packets detected with unexpected size, or bad
headers' stack."
::= { sapCemStatsEntry 10 }
sapCemStatsEgressLBitDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressLBitDropped indicates the
number of packets dropped due to the L bit set by the far
end."
::= { sapCemStatsEntry 11 }
sapCemStatsEgressMultipleDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressMultipleDropped indicates
the number of packets dropped due to multiple sequence
numbers."
::= { sapCemStatsEntry 12 }
sapCemStatsEgressESs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressESs indicates the number of
Error Seconds (ESs) encountered. Any malformed packet,
seq. error, LOPS and similar are considered as error
seconds."
::= { sapCemStatsEntry 13 }
sapCemStatsEgressSESs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressSESs indicates the number
of Severely Error Seconds (SESs) encountered. This is
when more than 30 percent of the packets within a one
second window are missing."
::= { sapCemStatsEntry 14 }
sapCemStatsEgressUASs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressUASs indicates the number of
Unavailable Seconds (UASs) encountered. Any consecutive
ten seconds of SESs are counted as one UAS."
::= { sapCemStatsEntry 15 }
sapCemStatsEgressFailureCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressFailureCounts indicates
the number failure events. A failure event begins when
the LOPS failure is declared, and ends when the failure
is cleared."
::= { sapCemStatsEntry 16 }
sapCemStatsEgressUnderrunCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressUnderrunCounts indicates
the number of times the jitter buffer went into an
underrun state."
::= { sapCemStatsEntry 17 }
sapCemStatsEgressOverrunCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapCemStatsEgressOverrunCounts indicates
the number of times the jitter buffer went into an
overrun state."
::= { sapCemStatsEntry 18 }
-- ------------------------------------------------------------
-- SAP TLS L2PT Statistics Table
-- ------------------------------------------------------------
sapTlsL2ptStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsL2ptStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains SAP Layer 2 Protocol Tunneling
Statistics.
This table complements sapTlsInfoTable. Rows in this
table are created and deleted automatically by the
system."
::= { tmnxSapObjs 42 }
sapTlsL2ptStatsEntry OBJECT-TYPE
SYNTAX SapTlsL2ptStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Layer 2 Protocol Tunneling Statistics for a specific SAP.
The statistics are provided for each combination of
Destination Address and LLC SNAP type."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapTlsL2ptStatsTable 1 }
SapTlsL2ptStatsEntry ::=
SEQUENCE {
sapTlsL2ptStatsLastClearedTime TimeStamp,
sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32,
sapTlsL2ptStatsStpConfigBpdusRx Counter32,
sapTlsL2ptStatsStpConfigBpdusTx Counter32,
sapTlsL2ptStatsStpRstBpdusRx Counter32,
sapTlsL2ptStatsStpRstBpdusTx Counter32,
sapTlsL2ptStatsStpTcnBpdusRx Counter32,
sapTlsL2ptStatsStpTcnBpdusTx Counter32,
sapTlsL2ptStatsPvstConfigBpdusRx Counter32,
sapTlsL2ptStatsPvstConfigBpdusTx Counter32,
sapTlsL2ptStatsPvstRstBpdusRx Counter32,
sapTlsL2ptStatsPvstRstBpdusTx Counter32,
sapTlsL2ptStatsPvstTcnBpdusRx Counter32,
sapTlsL2ptStatsPvstTcnBpdusTx Counter32,
sapTlsL2ptStatsOtherBpdusRx Counter32,
sapTlsL2ptStatsOtherBpdusTx Counter32,
sapTlsL2ptStatsOtherL2ptBpdusRx Counter32,
sapTlsL2ptStatsOtherL2ptBpdusTx Counter32,
sapTlsL2ptStatsOtherInvalidBpdusRx Counter32,
sapTlsL2ptStatsOtherInvalidBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32,
sapTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32,
sapTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32,
sapTlsL2ptStatsCdpBpdusRx Counter32,
sapTlsL2ptStatsCdpBpdusTx Counter32,
sapTlsL2ptStatsVtpBpdusRx Counter32,
sapTlsL2ptStatsVtpBpdusTx Counter32,
sapTlsL2ptStatsDtpBpdusRx Counter32,
sapTlsL2ptStatsDtpBpdusTx Counter32,
sapTlsL2ptStatsPagpBpdusRx Counter32,
sapTlsL2ptStatsPagpBpdusTx Counter32,
sapTlsL2ptStatsUdldBpdusRx Counter32,
sapTlsL2ptStatsUdldBpdusTx Counter32
}
sapTlsL2ptStatsLastClearedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsLastClearedTime indicates
the last time that these stats were cleared. The value
zero indicates that they have not been cleared yet."
::= { sapTlsL2ptStatsEntry 1 }
sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the
number of L2PT encapsulated STP config bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 2 }
sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the
number of L2PT encapsulated STP config bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 3 }
sapTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
number of L2PT encapsulated STP rst bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 4 }
sapTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
number of L2PT encapsulated STP rst bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 5 }
sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
number of L2PT encapsulated STP tcn bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 6 }
sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
number of L2PT encapsulated STP tcn bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 7 }
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the
number of L2PT encapsulated PVST config bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 8 }
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the
number of L2PT encapsulated PVST config bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 9 }
sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
number of L2PT encapsulated PVST rst bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 10 }
sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
number of L2PT encapsulated PVST rst bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 11 }
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
number of L2PT encapsulated PVST tcn bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 12 }
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 13 }
sapTlsL2ptStatsStpConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsStpConfigBpdusRx indicates the
number of STP config bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 14 }
sapTlsL2ptStatsStpConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsStpConfigBpdusTx indicates the
number of STP config bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 15 }
sapTlsL2ptStatsStpRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsStpRstBpdusRx indicates the
number of STP rst bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 16 }
sapTlsL2ptStatsStpRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsStpRstBpdusTx indicates the
number of STP rst bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 17 }
sapTlsL2ptStatsStpTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsStpTcnBpdusRx indicates the
number of STP tcn bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 18 }
sapTlsL2ptStatsStpTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsStpTcnBpdusTx indicates the
number of STP tcn bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 19 }
sapTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the
number of PVST config bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 20 }
sapTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the
number of PVST config bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 21 }
sapTlsL2ptStatsPvstRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPvstRstBpdusRx indicates the
number of PVST rst bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 22 }
sapTlsL2ptStatsPvstRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPvstRstBpdusTx indicates the
number of PVST rst bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 23 }
sapTlsL2ptStatsPvstTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the
number of PVST tcn bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 24 }
sapTlsL2ptStatsPvstTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the
number of PVST tcn bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 25 }
sapTlsL2ptStatsOtherBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsOtherBpdusRx indicates the
number of other bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 26 }
sapTlsL2ptStatsOtherBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsOtherBpdusTx indicates the
number of other bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 27 }
sapTlsL2ptStatsOtherL2ptBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the
number of other L2PT bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 28 }
sapTlsL2ptStatsOtherL2ptBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the
number of other L2PT bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 29 }
sapTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the
number of other invalid bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 30 }
sapTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the
number of other invalid bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 31 }
sapTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the
number of L2PT encapsulated CDP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 32 }
sapTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the
number of L2PT encapsulated CDP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 33 }
sapTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the
number of L2PT encapsulated VTP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 34 }
sapTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the
number of L2PT encapsulated VTP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 35 }
sapTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the
number of L2PT encapsulated DTP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 36 }
sapTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the
number of L2PT encapsulated DTP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 37 }
sapTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the
number of L2PT encapsulated PAGP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 38 }
sapTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the
number of L2PT encapsulated PAGP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 39 }
sapTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the
number of L2PT encapsulated UDLD bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 40 }
sapTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the
number of L2PT encapsulated UDLD bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 41 }
sapTlsL2ptStatsCdpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsCdpBpdusRx indicates the
number of CDP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 42 }
sapTlsL2ptStatsCdpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsCdpBpdusTx indicates the
number of CDP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 43 }
sapTlsL2ptStatsVtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsVtpBpdusRx indicates the
number of VTP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 44 }
sapTlsL2ptStatsVtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsVtpBpdusTx indicates the
number of VTP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 45 }
sapTlsL2ptStatsDtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsDtpBpdusRx indicates the
number of DTP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 46 }
sapTlsL2ptStatsDtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsDtpBpdusTx indicates the
number of DTP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 47 }
sapTlsL2ptStatsPagpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPagpBpdusRx indicates the
number of PAGP bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 48 }
sapTlsL2ptStatsPagpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsPagpBpdusTx indicates the
number of PAGP bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 49 }
sapTlsL2ptStatsUdldBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsUdldBpdusRx indicates the
number of UDLD bpdus received on this SAP."
::= { sapTlsL2ptStatsEntry 50 }
sapTlsL2ptStatsUdldBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sapTlsL2ptStatsUdldBpdusTx indicates the
number of UDLD bpdus transmitted on this SAP."
::= { sapTlsL2ptStatsEntry 51 }
-- ---------------------------------------------------------------------
-- Ethernet SAP Table
--
--
-- Sparse Dependent Extension of the sapBaseInfoTable.
--
-- The same indexes are used for both the base table, sapBaseInfoTable,
-- and the sparse dependent table, sapEthernetInfoTable.
--
-- This in effect extends the sapBaseInfoTable with additional columns.
-- Rows are created in the sapEthernetInfoTable only for those entries
-- in the sapBaseInfoTable that are created on a port with a
-- tmnxPortEncapType of 'EthernetEncap.'
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the sapEthernetInfoTable.
-- ---------------------------------------------------------------------
sapEthernetInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapEthernetInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains Ethernet SAP information."
::= { tmnxSapObjs 43 }
sapEthernetInfoEntry OBJECT-TYPE
SYNTAX SapEthernetInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific Ethernet SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { sapEthernetInfoTable 1 }
SapEthernetInfoEntry ::=
SEQUENCE {
sapEthernetLLFAdminStatus ServiceAdminStatus,
sapEthernetLLFOperStatus INTEGER
}
sapEthernetLLFAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "sapEthernetLLFAdminStatus specifies whether or not Link-
Loss Forwarding is enabled ('up'). When this object is set
to 'up' the underlying port will be forced into the
operationally 'down' state if the service is operationally
'down', or any of the 'sdpBindPwPeerStatusBits' are set,
and will set the underlying port's
tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting
this object to 'down' will clear the 'linklossFwd' reason.
sapEthernetLLFAdminStatus can only be enabled on saps
configured for an EPIPE service using an Ethernet
port with the tmnxPortEncapType set to 'nullEncap.'"
DEFVAL { down }
::= { sapEthernetInfoEntry 1 }
sapEthernetLLFOperStatus OBJECT-TYPE
SYNTAX INTEGER {
fault (1), -- service is down or fault detected.
clear (2) -- service is up and no fault detected.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "sapEthernetLLFOperStatus indicates whether or not the
underlying port is forced operationally 'down' due to the
service being operationally 'down' or an
sdpBindPwPeerStatusBits bit is set.
sapEthernetLLFOperStatus is set to 'fault' when the
sapEthernetLLFAdminStatus is set to 'up,' and either a
fault has occurred on the pseudo-wire, or the service is
down, otherwise sapEthernetLLFOperStatus is set to 'clear.'"
::= { sapEthernetInfoEntry 2 }
-- --------------------------------------------------------
-- msapPlcyTable
-- --------------------------------------------------------
msapPlcyTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsapPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The msapPlcyTable has an entry for each managed SAP(MSAP) policy
configured in the system."
::= { tmnxSapObjs 44 }
msapPlcyEntry OBJECT-TYPE
SYNTAX MsapPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the configuration for a managed SAP(MSAP) policy.
The values for each entry will be used to populate the following
tables when the MSAP policy is applied to a MSAP:
ALCATEL-IND1-TIMETRA-SAP-MIB::sapBaseInfoTable
ALCATEL-IND1-TIMETRA-SAP-MIB::sapSubMgmtInfoTable
"
INDEX { msapPlcyName }
::= { msapPlcyTable 1}
MsapPlcyEntry ::= SEQUENCE
{
msapPlcyName TNamedItem,
msapPlcyRowStatus RowStatus,
msapPlcyLastChanged TimeStamp,
msapPlcyDescription TItemDescription,
msapPlcyCpmProtPolicyId TCpmProtPolicyID,
msapPlcyCpmProtMonitorMac TruthValue,
msapPlcySubMgmtDefSubId INTEGER,
msapPlcySubMgmtDefSubIdStr TNamedItemOrEmpty,
msapPlcySubMgmtDefSubProfile TNamedItemOrEmpty,
msapPlcySubMgmtDefSlaProfile TNamedItemOrEmpty,
msapPlcySubMgmtDefAppProfile TNamedItemOrEmpty,
msapPlcySubMgmtSubIdPlcy TPolicyStatementNameOrEmpty,
msapPlcySubMgmtSubscriberLimit Unsigned32,
msapPlcySubMgmtProfiledTrafOnly TruthValue,
msapPlcySubMgmtNonSubTrafSubId TNamedItemOrEmpty,
msapPlcySubMgmtNonSubTrafSubProf TNamedItemOrEmpty,
msapPlcySubMgmtNonSubTrafSlaProf TNamedItemOrEmpty,
msapPlcySubMgmtNonSubTrafAppProf TNamedItemOrEmpty,
msapPlcyAssociatedMsaps Counter32
}
msapPlcyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of msapPlcyName specifies the name of the MSAP policy."
::= { msapPlcyEntry 1 }
msapPlcyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcyRowStatus is used for the creation
and deletion of MSAP policies."
::= { msapPlcyEntry 2 }
msapPlcyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of msapPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { msapPlcyEntry 3 }
msapPlcyDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcyDescription specifies the description
of the MSAP policy."
DEFVAL { "" }
::= { msapPlcyEntry 4 }
msapPlcyCpmProtPolicyId OBJECT-TYPE
SYNTAX TCpmProtPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcyCpmProtPolicyId specifies a CPM Protection
policy for the MSAP policy.
If a corresponding policy is not defined in
TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue'
error will be returned.
A value of one specifies that the default CPM Protection
policy is associated with the Managed SAP.
This object is not supported on SR-1 and ESS-1, where the
value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. An attempt to set msapPlcyCpmProtPolicyId to a non-zero
value on one of these unsupported chassis types will return
an 'inconsistentValue' error."
DEFVAL { 1 }
::= { msapPlcyEntry 5 }
msapPlcyCpmProtMonitorMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcyCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy,
as specified by msapPlcyCpmProtPolicyId, must be applied.
If the value of msapPlcyCpmProtMonitorMac is 'true', the
per-source rate limit must be applied.
If the value of msapPlcyCpmProtPolicyId is equal to zero,
the value of msapPlcyCpmProtMonitorMac is irrelevant and
will be ignored.
This object is not supported on SR-1 and ESS-1, where the
value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. An attempt to set msapPlcyCpmProtMonitorMac to 'true'
on one of these unsupported chassis types will return an
'inconsistentValue' error."
DEFVAL { false }
::= { msapPlcyEntry 6 }
msapPlcySubMgmtDefSubId OBJECT-TYPE
SYNTAX INTEGER {
useSapId (1),
useString (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtDefSubId specifies what will be used as
the default subscriber identification applicable on the MSAP.
This value is used in case no other source (like Radius) provides a
subscriber identification string.
If the value of this object is set to 'useSapId', the SAP-id will
be used as the default subscriber identification string. In this case,
msapPlcySubMgmtDefSubIdStr must contain the empty string, so any
non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty
string.
If the value of this object is set to 'useString', the value of
msapPlcySubMgmtDefSubIdStr will be used as the default subscriber
identification string. In this case, an empty msapPlcySubMgmtDefSubIdStr
means that there is no default subscriber identification configured."
DEFVAL { useString }
::= { msapPlcyEntry 7 }
msapPlcySubMgmtDefSubIdStr OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtDefSubIdStr specifies the default
subscriber identification string applicable on this MSAP."
DEFVAL { "" }
::= { msapPlcyEntry 8 }
msapPlcySubMgmtDefSubProfile OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtDefSubProfile specifies the default
subscriber profile applicable on the MSAP.
If a corresponding profile is not defined in tmnxSubProfileTable, an
'inconsistentValue' error will be returned.
A value of 'default' is not allowed for this object."
DEFVAL { "" }
::= { msapPlcyEntry 9 }
msapPlcySubMgmtDefSlaProfile OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtDefSlaProfile specifies the default SLA
profile applicable on the MSAP.
If a corresponding profile is not defined in tmnxSLAProfileTable, an
'inconsistentValue' error will be returned."
DEFVAL { "" }
::= { msapPlcyEntry 10 }
msapPlcySubMgmtDefAppProfile OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtDefAppProfile specifies the default
application profile applicable on the MSAP.
If a corresponding profile is not defined in
TIMETRA-BSX-MIB::tmnxBsxAppProfTable, an 'inconsistentValue'
error will be returned."
DEFVAL { "" }
::= { msapPlcyEntry 11 }
msapPlcySubMgmtSubIdPlcy OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtSubIdPlcy specifies the subscriber
identification policy applicable on the MSAP.
If a corresponding profile is not defined in tmnxSubIdentPolicyTable,
an 'inconsistentValue' error will be returned."
DEFVAL { "" }
::= { msapPlcyEntry 12 }
msapPlcySubMgmtSubscriberLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtSubscriberLimit specifies the
maximum number of subscribers allowed for the MSAP.
A value is 0 means there is no limit.
The values for the objects msapPlcySubMgmtProfiledTrafOnly,
msapPlcySubMgmtNonSubTrafSubProf, and
msapPlcySubMgmtNonSubTrafSlaProf are only meaningful when
the value of msapPlcySubMgmtSubscriberLimit is 1 and will not
be used when the value of msapPlcySubMgmtSubscriberLimit is
not 1."
DEFVAL { 1 }
::= { msapPlcyEntry 13 }
msapPlcySubMgmtProfiledTrafOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtProfiledTrafOnly specifies
whether only profiled traffic is applicable for the MSAP.
If set to 'true', the MSAP queues will be deleted.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1."
DEFVAL { false }
::= { msapPlcyEntry 14 }
msapPlcySubMgmtNonSubTrafSubId OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtNonSubTrafSubId specifies the
subscriber identification applicable on the MSAP for all
non-subscriber traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { msapPlcyEntry 15 }
msapPlcySubMgmtNonSubTrafSubProf OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtNonSubTrafSubProf specifies the
subscriber profile applicable on the MSAP for all
non-subscriber traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { msapPlcyEntry 16 }
msapPlcySubMgmtNonSubTrafSlaProf OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtNonSubTrafSlaProf specifies the
SLA profile applicable on the MSAP for all non-subscriber
traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { msapPlcyEntry 17 }
msapPlcySubMgmtNonSubTrafAppProf OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapPlcySubMgmtNonSubTrafAppProf specifies the
Application profile applicable on the MSAP for all
non-subscriber traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1."
DEFVAL { "" }
::= { msapPlcyEntry 18 }
msapPlcyAssociatedMsaps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of msapPlcyAssociatedMsaps indicates the
number of MSAPs associated with this MSAP policy."
::= { msapPlcyEntry 19 }
-- --------------------------------------------------------
-- msapTlsPlcyTable
-- --------------------------------------------------------
msapTlsPlcyTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsapTlsPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The msapTlsPlcyTable has an entry for each managed SAP (MSAP)
policy configured in the system."
::= { tmnxSapObjs 45 }
msapTlsPlcyEntry OBJECT-TYPE
SYNTAX MsapTlsPlcyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the VPLS-related configuration for a managed
SAP (MSAP) policy.
The values for each entry will be used to populate the following
VPLS-related tables when the MSAP policy is applied to a MSAP:
TIMETRA-SAP-MIB::sapTlsInfoTable
TIMETRA-SAP-MIB::sapTlsDhcpInfoTable
ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable
"
AUGMENTS { msapPlcyEntry }
::= { msapTlsPlcyTable 1}
MsapTlsPlcyEntry ::= SEQUENCE
{
msapTlsPlcyLastChanged TimeStamp,
msapTlsPlcySplitHorizonGrp TNamedItemOrEmpty,
msapTlsPlcyArpReplyAgent INTEGER,
msapTlsPlcySubMgmtMacDaHashing TruthValue,
msapTlsPlcyDhcpLeasePopulate Unsigned32,
msapTlsPlcyDhcpPrxyAdminState TmnxEnabledDisabled,
msapTlsPlcyDhcpPrxyServAddrType InetAddressType,
msapTlsPlcyDhcpPrxyServAddr InetAddress,
msapTlsPlcyDhcpPrxyLeaseTime Unsigned32,
msapTlsPlcyDhcpPrxyLTRadOverride TruthValue,
msapTlsPlcyDhcpInfoAction INTEGER,
msapTlsPlcyDhcpCircuitId INTEGER,
msapTlsPlcyDhcpRemoteId INTEGER,
msapTlsPlcyDhcpRemoteIdString TNamedItemOrEmpty,
msapTlsPlcyDhcpVendorInclOpts BITS,
msapTlsPlcyDhcpVendorOptStr TNamedItemOrEmpty,
msapTlsPlcyEgressMcastGroup TNamedItemOrEmpty,
msapTlsPlcyIgmpSnpgImportPlcy TPolicyStatementNameOrEmpty,
msapTlsPlcyIgmpSnpgFastLeave TmnxEnabledDisabled,
msapTlsPlcyIgmpSnpgSendQueries TmnxEnabledDisabled,
msapTlsPlcyIgmpSnpgGenQueryIntv Unsigned32,
msapTlsPlcyIgmpSnpgQueryRespIntv Unsigned32,
msapTlsPlcyIgmpSnpgRobustCount Unsigned32,
msapTlsPlcyIgmpSnpgLastMembIntvl Unsigned32,
msapTlsPlcyIgmpSnpgMaxNbrGrps Unsigned32,
msapTlsPlcyIgmpSnpgMvrFromVplsId TmnxServId,
msapTlsPlcyIgmpSnpgVersion TmnxIgmpVersion,
msapTlsPlcyIgmpSnpgMcacPlcyName TPolicyStatementNameOrEmpty,
msapTlsPlcyIgmpSnpgMcacUncnstBW Integer32,
msapTlsPlcyIgmpSnpgMcacPrRsvMnBW Integer32
}
msapTlsPlcyLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of msapTlsPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { msapTlsPlcyEntry 1 }
msapTlsPlcySplitHorizonGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcySplitHorizonGrp specifies the name of the
split-horizon group for the MSAP.
If the name specified does not correspond to a tlsShgInfoEntry
for the VPLS service, the creation of the MSAP will fail.
Additionally, if msapTlsPlcySplitHorizonGrp is set to a new value,
the sapSplitHorizonGrp object for any existing MSAPs created by
this policy will not be updated."
DEFVAL { "" }
::= { msapTlsPlcyEntry 2 }
msapTlsPlcyArpReplyAgent OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2),
enabledWithSubscrIdent (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyArpReplyAgent specifies the status of the special
ARP response mechanism in the system for ARP requests destined to
static or dynamic hosts associated with the MSAP.
'disabled' - the ARP reply function is not operational
'enabled' - the ARP reply function is enabled without
subscriber identification.
'enabledWithSubscrIdent' - the ARP reply function is enabled
with subscriber identification."
DEFVAL { disabled }
::= { msapTlsPlcyEntry 3 }
msapTlsPlcySubMgmtMacDaHashing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcySubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG MSAP has its egress LAG
link selected by a function of the MAC destination address
instead of subscriber id."
DEFVAL { false }
::= { msapTlsPlcyEntry 4 }
msapTlsPlcyDhcpLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of
DHCP lease states allowed on the MSAP."
DEFVAL { 1 }
::= { msapTlsPlcyEntry 5 }
msapTlsPlcyDhcpPrxyAdminState OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired
administrative state of the proxy server on the interface."
DEFVAL { disabled }
::= { msapTlsPlcyEntry 6 }
msapTlsPlcyDhcpPrxyServAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type
of msapTlsPlcyDhcpPrxyServAddr."
DEFVAL { unknown }
::= { msapTlsPlcyEntry 7 }
msapTlsPlcyDhcpPrxyServAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16|20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the
which will be used as the source address of the emulated DHCP server
in the context of the VPLS MSAP.
This address is mandatory for the proxy server capability and it
should be in the context of the subnet represented by the VPLS."
DEFVAL { ''H }
::= { msapTlsPlcyEntry 8 }
msapTlsPlcyDhcpPrxyLeaseTime OBJECT-TYPE
SYNTAX Unsigned32 (0|300..315446399)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long
a DHCP client is allowed to use the offered IP address.
A value of 0 means the lease time provided by a RADIUS or an upstream
DHCP server will not be overridden. A value of
7 days (315446399 seconds) is used when RADIUS does not provide a
lease time."
DEFVAL { 0 }
::= { msapTlsPlcyEntry 9 }
msapTlsPlcyDhcpPrxyLTRadOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the
lease time provided by the RADIUS server is presented to the DHCP
client.
By default the proxy-server will always make use of
msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time information is
provided from the RADIUS server. When msapTlsPlcyDhcpPrxyLTRadOverride is
set to 'true', the proxy-server will use the lease time
information provided by the RADIUS server, regardless of the
configured lease time."
DEFVAL { false }
::= { msapTlsPlcyEntry 10 }
msapTlsPlcyDhcpInfoAction OBJECT-TYPE
SYNTAX INTEGER {
replace (1),
drop (2),
keep (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option
reforwarding policy:
'replace' - replace existing information with configured
information
'drop' - discard messages with existing relay information if the
option-82 information is also present
'keep' - retain the existing relay information"
DEFVAL { keep }
::= { msapTlsPlcyEntry 11 }
msapTlsPlcyDhcpCircuitId OBJECT-TYPE
SYNTAX INTEGER {
none (0),
asciiTuple (1),
vlanAsciiTuple (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpCircuitId specifies whether or not the
circuit-id suboption is present, and if it is present what
information goes in it:
none - the circuit-id suboption will not be part of
the information option (Option 82).
asciiTuple - the ASCII-encoded concatenated tuple consisting
of the
- access-node-identifier
- service-id
- interface-name
is used.
vlanAsciiTuple - the format will include VLAN-id and dot1p bits
in addition to what is included in ascii-tuple
already. The format is supported on dot1q and
qinq encapsulated ports only. Thus, when the
option 82 bits are stripped, dot1p bits will be
copied to the Ethernet header of an outgoing
packet."
DEFVAL { asciiTuple }
::= { msapTlsPlcyEntry 12 }
msapTlsPlcyDhcpRemoteId OBJECT-TYPE
SYNTAX INTEGER {
none (1),
mac (2),
remote-id (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpRemoteId specifies what information goes into
the remote-id suboption in the DHCP Relay packet.
If the value of this object is set to 'none', the remote-id suboption
will not be part of the information option (Option 82).
If the value of this object is set to 'mac', the MAC address of the
remote end is encoded in the suboption.
If the value of this object is set to 'remote-id',
msapTlsPlcyDhcpRemoteIdString will represent the remote-id.
By default, the remote-id value is none."
DEFVAL { none }
::= { msapTlsPlcyEntry 13 }
msapTlsPlcyDhcpRemoteIdString OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The
value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have
the value of 'remote-id'."
DEFVAL { "" }
::= { msapTlsPlcyEntry 14 }
msapTlsPlcyDhcpVendorInclOpts OBJECT-TYPE
SYNTAX BITS {
systemId (0),
clientMac (1),
serviceId (2),
sapId (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the
Alcatel-Lucent vendor specific sub-option of option 82.
The value of this object is only used when msapTlsPlcyDhcpInfoAction is
'replace'."
DEFVAL { { systemId } }
::= { msapTlsPlcyEntry 15 }
msapTlsPlcyDhcpVendorOptStr OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes
into the Alcatel-Lucent vendor specific sub-option of option 82.
This string is only used when msapTlsPlcyDhcpInfoAction is set to
'replace'."
DEFVAL { "" }
::= { msapTlsPlcyEntry 16 }
msapTlsPlcyEgressMcastGroup OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast
Group for the MSAP."
DEFVAL { "" }
::= { msapTlsPlcyEntry 17 }
msapTlsPlcyIgmpSnpgImportPlcy OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement
that is be applied to all incoming IGMP messages on the MSAP."
DEFVAL { "" }
::= { msapTlsPlcyEntry 18 }
msapTlsPlcyIgmpSnpgFastLeave OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgFastLeave specifies
whether fast leave is allowed on this MSAP.
If set to 'enabled', the system prunes the port on which an IGMP
'leave' message has been received without waiting for the Group
Specific Query to timeout."
DEFVAL { disabled }
::= { msapTlsPlcyEntry 19 }
msapTlsPlcyIgmpSnpgSendQueries OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgSendQueries specifies
whether the system generates General Queries by itself on
the MSAP."
DEFVAL { disabled }
::= { msapTlsPlcyEntry 20 }
msapTlsPlcyIgmpSnpgGenQueryIntv OBJECT-TYPE
SYNTAX Unsigned32 (2..1024)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies
the interval (in seconds) between two consecutive general queries sent
by the system on the MSAP.
The value of this object is only meaningful when the value of
msapTlsPlcyIgmpSnpgSendQueries is 'enabled'."
DEFVAL { 125 }
::= { msapTlsPlcyEntry 21 }
msapTlsPlcyIgmpSnpgQueryRespIntv OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies
the maximum response time (in seconds) advertised in IGMPv2/v3
queries.
The value of this object is only meaningful when the value of
msapTlsPlcyIgmpSnpgSendQueries is 'enabled'."
DEFVAL { 10 }
::= { msapTlsPlcyEntry 22 }
msapTlsPlcyIgmpSnpgRobustCount OBJECT-TYPE
SYNTAX Unsigned32 (2..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgRobustCount specifies
the robustness variable on the MSAP.
This object allows tuning for the expected packet loss on the MSAP.
If a MSAP is expected to be lossy, the Robustness Variable may be
increased. IGMP snooping is robust to (Robustness Variable-1) packet
losses.
The value of this object is only meaningful when the value of
msapTlsPlcyIgmpSnpgSendQueries is 'enabled'."
DEFVAL { 2 }
::= { msapTlsPlcyEntry 23 }
msapTlsPlcyIgmpSnpgLastMembIntvl OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
UNITS "deci-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the
Max Response Time (in tenths of a second) used in
Group-Specific and Group-Source-Specific Queries sent in response
to 'leave' messages. This is also the amount of time between
Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network.
A reduced value results in reduced time to detect the loss of the last
member of a group."
DEFVAL { 10 }
::= { msapTlsPlcyEntry 24 }
msapTlsPlcyIgmpSnpgMaxNbrGrps OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group
addresses are allowed for the MSAP.
The value 0 means that no limit is imposed."
DEFVAL { 0 }
::= { msapTlsPlcyEntry 25 }
msapTlsPlcyIgmpSnpgMvrFromVplsId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which
VPLS the multicast streams corresponding to the groups learned
via the MSAP are copied.
Groups which cannot be joined to the corresponding MVR VPLS
(because MVR is not up or the configured MVR policy rejects the group)
copy the multicast streams from the local VPLS if IGMP snooping is up
(i.e. tlsIgmpSnpgCfgAdminState is 'enabled')."
DEFVAL { 0 }
::= { msapTlsPlcyEntry 26 }
msapTlsPlcyIgmpSnpgVersion OBJECT-TYPE
SYNTAX TmnxIgmpVersion
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgVersion specifies the version
of IGMP running on the MSAP."
DEFVAL { version3 }
::= { msapTlsPlcyEntry 27 }
msapTlsPlcyIgmpSnpgMcacPlcyName OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name
of the multicast CAC (Connection Admission Control) policy."
DEFVAL { "" }
::= { msapTlsPlcyEntry 28 }
msapTlsPlcyIgmpSnpgMcacUncnstBW OBJECT-TYPE
SYNTAX Integer32 (-1|0..2147483647)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilo-bits per
second(kbps).
If the default value of '-1' is set, there is no constraint on
bandwidth allocated at the interface.
If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if
a multicast CAC policy is assigned on the interface, then
no group (channel) from that policy is allowed on that interface."
DEFVAL { -1 }
::= { msapTlsPlcyEntry 29 }
msapTlsPlcyIgmpSnpgMcacPrRsvMnBW OBJECT-TYPE
SYNTAX Integer32 (-1|0..2147483647)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface
in kilo-bits per second(kbps).
If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory
channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW
is '-1', then all mandatory and optional channels are allowed.
If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the
value of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained
bandwidth on a given interface is allocated to mandatory channels
configured through multicast CAC policy on that interface and no
optional groups (channels) are allowed.
The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less
than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt
to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than
that of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in
'inconsistentValue' error."
DEFVAL { -1 }
::= { msapTlsPlcyEntry 30 }
-- --------------------------------------------------------
--
-- msapIgmpSnpgMcacLevelTable
--
-- --------------------------------------------------------
msapIgmpSnpgMcacLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSapIgmpSnpgMcacLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The msapIgmpSnpgMcacLevelTable has an entry for each
multicast CAC policy constraint level configured for
a Managed SAP policy."
::= { tmnxSapObjs 46 }
msapIgmpSnpgMcacLevelEntry OBJECT-TYPE
SYNTAX MSapIgmpSnpgMcacLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents a multicast CAC policy
bundle level constraints for a particular Managed
SAP policy. Entries are created and deleted by
the user."
INDEX { msapPlcyName, msapIgmpSnpgMcacLevelId }
::= { msapIgmpSnpgMcacLevelTable 1}
MSapIgmpSnpgMcacLevelEntry ::= SEQUENCE {
msapIgmpSnpgMcacLevelId Unsigned32,
msapIgmpSnpgMcacLevelRowStatus RowStatus,
msapIgmpSnpgMcacLevelLastChanged TimeStamp,
msapIgmpSnpgMcacLevelBW Unsigned32
}
msapIgmpSnpgMcacLevelId OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLevelId indicates
the level id of the multicast CAC policy bundle
constraint.
The value of level 1 has the highest priority and
level 8 the lowest."
::= { msapIgmpSnpgMcacLevelEntry 1 }
msapIgmpSnpgMcacLevelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLevelRowStatus is
used for creation and deletion of level constraint
in a CAC for a Managed SAP policy."
::= { msapIgmpSnpgMcacLevelEntry 2 }
msapIgmpSnpgMcacLevelLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLevelLastChanged indicates
the sysUpTime at the time of the last modification
of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { msapIgmpSnpgMcacLevelEntry 3 }
msapIgmpSnpgMcacLevelBW OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLevelBW specifies
the bandwidth in kilo-bits per second (kbps) for
the level."
DEFVAL { 1 }
::= { msapIgmpSnpgMcacLevelEntry 4 }
-- --------------------------------------------------------
--
-- msapIgmpSnpgMcacLagTable
--
-- --------------------------------------------------------
msapIgmpSnpgMcacLagTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSapIgmpSnpgMcacLagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The msapIgmpSnpgMcacLagTable has an entry for each lag
port configured for a multicast CAC policy bundle configured
for a Managed SAP policy."
::= { tmnxSapObjs 47 }
msapIgmpSnpgMcacLagEntry OBJECT-TYPE
SYNTAX MSapIgmpSnpgMcacLagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each row entry represents a particular multicast CAC lag port
constraints for a Managed SAP policy.. Entries are
created and deleted by the user."
INDEX { msapPlcyName, msapIgmpSnpgMcacLagPortsDown }
::= { msapIgmpSnpgMcacLagTable 1}
MSapIgmpSnpgMcacLagEntry ::= SEQUENCE {
msapIgmpSnpgMcacLagPortsDown Unsigned32,
msapIgmpSnpgMcacLagRowStatus RowStatus,
msapIgmpSnpgMcacLagLastChanged TimeStamp,
msapIgmpSnpgMcacLagLevel Unsigned32
}
msapIgmpSnpgMcacLagPortsDown OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLagPortsDown indicates
the configured number of ports in a lag group that are down.
If the number of ports available in the lag is reduced by the
number of ports configured for msapIgmpSnpgMcacLagPortsDown
object then bandwidth allowed for bundle will be updated to
the value of msapIgmpSnpgMcacLevelBW indexed by
msapIgmpSnpgMcacLagLevel value."
::= { msapIgmpSnpgMcacLagEntry 1 }
msapIgmpSnpgMcacLagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLagRowStatus is used for
creation and deletion of lag constraint in a CAC policy."
::= { msapIgmpSnpgMcacLagEntry 2 }
msapIgmpSnpgMcacLagLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLagLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { msapIgmpSnpgMcacLagEntry 3 }
msapIgmpSnpgMcacLagLevel OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLagLevel specifies the level
id to use when the value of msapIgmpSnpgMcacLagPortsDown
matches the actual number of ports down in a lag.
Using the value of msapIgmpSnpgMcacLagLevel as an index,
the operational MSAP unconstrained bandwidth will be set
to msapIgmpSnpgMcacLevelBW.
By default, for all lag constraints the link level will
be set to 1 at row creation."
DEFVAL { 1 }
::= { msapIgmpSnpgMcacLagEntry 4 }
-- ---------------------------------------------------------------------
-- Managed SAP Information Table
--
-- Sparse Dependent Extension of the sapBaseInfoTable.
--
-- The same indexes are used for both the base table, sapBaseInfoTable,
-- and the sparse dependent table, msapInfoTable.
--
-- This in effect extends the sapBaseInfoTable with additional columns.
-- Rows are created in the msapInfoTable only for those entries
-- in the sapBaseInfoTable that are created on a port with a
-- sapSubType of 'managed'.
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the msapInfoTable.
-- ---------------------------------------------------------------------
msapInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSapInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains Managed SAP information."
::= { tmnxSapObjs 48 }
msapInfoEntry OBJECT-TYPE
SYNTAX MSapInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a specific Managed SAP."
INDEX { svcId, sapPortId, sapEncapValue }
::= { msapInfoTable 1 }
MSapInfoEntry ::=
SEQUENCE {
msapInfoCreationSapPortEncapVal TmnxEncapVal,
msapInfoCreationPlcyName TNamedItem,
msapInfoReEvalPolicy TmnxActionType,
msapInfoLastChanged TimeStamp
}
msapInfoCreationSapPortEncapVal OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapInfoCreationSapPortEncapVal indicates
the port encapsulation value of the SAP with a sapSubType
value of 'capture' that created this MSAP."
::= { msapInfoEntry 1 }
msapInfoCreationPlcyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapInfoCreationPlcyName indicates
the value of the msapPlcyName object for MSAP policy
used to create this MSAP."
::= { msapInfoEntry 2 }
msapInfoReEvalPolicy OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of msapInfoReEvalPolicy specifies whether
to re-apply the Managed SAP policy associated with
this MSAP.
When a SET of this object is done with a value of
'doAction', the system will attempt to re-apply the
MSAP policy indicated by msapInfoCreationPlcyName.
If this action is successful, 'noError' will be returned.
If this action is unsuccessful, an 'inconsistentValue'
error will be returned. Attempting to SET this object with
a value of 'notApplicable' will have no effect and will
return 'noError'.
SNMP GET and GETNEXT requests on this object will
return 'notApplicable'."
DEFVAL { notApplicable }
::= { msapInfoEntry 3 }
msapInfoLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapInfoLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { msapInfoEntry 4 }
-- ---------------------------------------------------------------------
-- Capture SAP Stats Table
--
--
-- Sparse Dependent Extension of the sapBaseInfoTable.
--
-- The same indexes are used for both the base table, sapBaseInfoTable,
-- and the sparse dependent table, msapCaptureSapStatsTable.
--
-- This in effect extends the sapBaseInfoTable with additional columns.
-- Rows are created in the msapTriggerPktStatsTable only for those entries
-- in the sapBaseInfoTable that have a sapSubType of 'capture'.
--
-- Deletion of a row in the sapBaseInfoTable results in the
-- same fate for the row in the msapTriggerPktStatsTable.
-- ---------------------------------------------------------------------
msapCaptureSapStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSapCaptureSapStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains statistics for SAPs
with a sapSubType value of 'capture'."
::= { tmnxSapObjs 49 }
msapCaptureSapStatsEntry OBJECT-TYPE
SYNTAX MSapCaptureSapStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistics for a specific 'capture' SAP."
INDEX { svcId,
sapPortId,
sapEncapValue,
msapCaptureSapStatsTriggerType }
::= { msapCaptureSapStatsTable 1 }
MSapCaptureSapStatsEntry ::=
SEQUENCE {
msapCaptureSapStatsTriggerType INTEGER,
msapCaptureSapStatsPktsRecvd Counter32,
msapCaptureSapStatsPktsRedirect Counter32,
msapCaptureSapStatsPktsDropped Counter32
}
msapCaptureSapStatsTriggerType OBJECT-TYPE
SYNTAX INTEGER {
dhcp (1),
pppoe (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The value of msapCaptureSapStatsTriggerType indicates the
type of trigger packets this entry is for."
::= { msapCaptureSapStatsEntry 1 }
msapCaptureSapStatsPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapCaptureSapStatsPktsRecvd indicates the
number of packets received on this 'capture' SAP."
::= { msapCaptureSapStatsEntry 2 }
msapCaptureSapStatsPktsRedirect OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapCaptureSapStatsPktsRedirect indicates the
number of packets redirected on this 'capture' SAP."
::= { msapCaptureSapStatsEntry 3 }
msapCaptureSapStatsPktsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapCaptureSapStatsPktsDropped indicates the
number of packets dropped on this 'capture' SAP."
::= { msapCaptureSapStatsEntry 4 }
-- -------------------------------------
-- TLS SAP MRP Table
-- -------------------------------------
sapTlsMrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sapTlsMrpTable augments sapTlsInfoTable with
attributes of the Multiple Registration Protocol (MRP)
feature for the TLS SAP."
::= { tmnxSapObjs 50 }
sapTlsMrpEntry OBJECT-TYPE
SYNTAX SapTlsMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MRP specific information about a SAP in a TLS."
AUGMENTS { sapTlsInfoEntry }
::= { sapTlsMrpTable 1 }
SapTlsMrpEntry ::=
SEQUENCE {
sapTlsMrpRxPdus Counter32,
sapTlsMrpDroppedPdus Counter32,
sapTlsMrpTxPdus Counter32,
sapTlsMrpRxNewEvent Counter32,
sapTlsMrpRxJoinInEvent Counter32,
sapTlsMrpRxInEvent Counter32,
sapTlsMrpRxJoinEmptyEvent Counter32,
sapTlsMrpRxEmptyEvent Counter32,
sapTlsMrpRxLeaveEvent Counter32,
sapTlsMrpTxNewEvent Counter32,
sapTlsMrpTxJoinInEvent Counter32,
sapTlsMrpTxInEvent Counter32,
sapTlsMrpTxJoinEmptyEvent Counter32,
sapTlsMrpTxEmptyEvent Counter32,
sapTlsMrpTxLeaveEvent Counter32
}
sapTlsMrpRxPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxPdus indicates the number of MRP packets
received on this SAP."
::= { sapTlsMrpEntry 1 }
sapTlsMrpDroppedPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpDroppedPdus indicates the number of dropped MRP
packets on this SAP."
::= { sapTlsMrpEntry 2 }
sapTlsMrpTxPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxPdus indicates the number of MRP packets
transmitted on this SAP."
::= { sapTlsMrpEntry 3 }
sapTlsMrpRxNewEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP
events received on this SAP."
::= { sapTlsMrpEntry 4 }
sapTlsMrpRxJoinInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In'
MRP events received on this SAP."
::= { sapTlsMrpEntry 5 }
sapTlsMrpRxInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxInEvent indicates the number of 'In' MRP
events received on this SAP."
::= { sapTlsMrpEntry 6 }
sapTlsMrpRxJoinEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxJoinEmptyEvent indicates the number of
'Join Empty' MRP events received on this SAP."
::= { sapTlsMrpEntry 7 }
sapTlsMrpRxEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty'
MRP events received on this SAP."
::= { sapTlsMrpEntry 8 }
sapTlsMrpRxLeaveEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave'
MRP events received on this SAP."
::= { sapTlsMrpEntry 9 }
sapTlsMrpTxNewEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP
events transmitted on this SAP."
::= { sapTlsMrpEntry 10 }
sapTlsMrpTxJoinInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In'
MRP events transmitted on this SAP."
::= { sapTlsMrpEntry 11 }
sapTlsMrpTxInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxInEvent indicates the number of 'In' MRP
events transmitted on this SAP."
::= { sapTlsMrpEntry 12 }
sapTlsMrpTxJoinEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxJoinEmptyEvent indicates the number of
'Join Empty' MRP events transmitted on this SAP."
::= { sapTlsMrpEntry 13 }
sapTlsMrpTxEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty'
MRP events transmitted on this SAP."
::= { sapTlsMrpEntry 14 }
sapTlsMrpTxLeaveEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave'
MRP events transmitted on this SAP."
::= { sapTlsMrpEntry 15 }
-- -------------------------------------
-- TLS SAP MMRP Table
-- -------------------------------------
sapTlsMmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SapTlsMmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains an entry for each MAC address managed
by Multiple MAC Registration Protocol (MMRP) on the SAP
for the TLS. Entries are dynamically created and
destroyed by the system as the MAC Addresses are registered
or declared in MMRP."
::= { tmnxSapObjs 51 }
sapTlsMmrpEntry OBJECT-TYPE
SYNTAX SapTlsMmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MMRP specific information about a MAC address managed by
MMRP on a SAP in a TLS."
INDEX { svcId, sapPortId, sapEncapValue, sapTlsMmrpMacAddr }
::= { sapTlsMmrpTable 1 }
SapTlsMmrpEntry ::=
SEQUENCE {
sapTlsMmrpMacAddr MacAddress,
sapTlsMmrpDeclared TruthValue,
sapTlsMmrpRegistered TruthValue
}
sapTlsMmrpMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sapTlsMmrpMacAddr indicates an ethernet MAC address which
is being managed by MMRP on this SAP."
::= { sapTlsMmrpEntry 1 }
sapTlsMmrpDeclared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMmrpDeclared indicates whether the MRP applicant
on this SAP is declaring this MAC address on behalf of MMRP."
::= { sapTlsMmrpEntry 2 }
sapTlsMmrpRegistered OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sapTlsMmrpRegistered indicates whether the MRP registrant
on this SAP has notified MMRP of a registration of this MAC address."
::= { sapTlsMmrpEntry 3 }
-- --------------------------------------
-- TblLastChgd objects for msap tables
-- --------------------------------------
msapPlcyTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapPlcyTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapPlcyTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSapObjs 59 }
msapTlsPlcyTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapTlsPlcyTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapTlsPlcyTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSapObjs 60 }
msapIgmpSnpgMcacLvlTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLvlTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapIgmpSnpgMcacLevelTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSapObjs 61 }
msapIgmpSnpgMcacLagTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapIgmpSnpgMcacLagTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapIgmpSnpgMcacLagTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSapObjs 62 }
msapInfoTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of msapInfoTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapInfoTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxSapObjs 63 }
-- --------------------------------------
-- SAP Notification Objects
-- --------------------------------------
-- tmnxSapNotifyObjs OBJECT IDENTIFIER ::= ( tmnxSapObjs 100 }
sapNotifyPortId OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The ID of the access port where a SAP is defined.
This object is used by the sapPortStateChangeProcessed
notification to indicate the port ID that changed
state and that resulted in having the associated
sapStatusChanged events suppressed for all SAPs on
that port."
::= { tmnxSapNotifyObjs 1 }
msapStatus OBJECT-TYPE
SYNTAX ConfigStatus
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The status of the Managed SAP which is used
by the msapStateChanged notification to indicate
what state the Managed SAP has entered: 'created',
'modified', or 'deleted'."
::= { tmnxSapNotifyObjs 2 }
svcManagedSapCreationError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object svcManagedSapCreationError
indicates the reason why the system was unable to create
the managed SAP."
::= { tmnxSapNotifyObjs 3 }
-- --------------------------------------
-- SAP Notifications
-- --------------------------------------
sapCreated NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue
}
STATUS obsolete
DESCRIPTION "This trap is sent when a new row is created
in the sapBaseInfoTable."
::= { sapTraps 1 }
sapDeleted NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue
}
STATUS obsolete
DESCRIPTION "This trap is sent when an existing row is
deleted from the sapBaseInfoTable."
::= { sapTraps 2 }
sapStatusChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
sapAdminStatus,
sapOperStatus,
sapOperFlags
}
STATUS current
DESCRIPTION "The sapStatusChanged notification is generated
when there is a change in the administrative or
operating status of an SAP.
Notice that this trap is not generated whenever
the SAP operating status change is caused by an
operating status change on the associated access
port."
::= { sapTraps 3 }
sapTlsMacAddrLimitAlarmRaised NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The trap sapTlsMacAddrLimitAlarmRaised is sent whenever
the number of MAC addresses stored in the FDB for this SAP
increases to reach the watermark specified by the object
svcTlsFdbTableFullHighWatermark."
::= { sapTraps 4 }
sapTlsMacAddrLimitAlarmCleared NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The trap sapTlsMacAddrLimitAlarmCleared is sent whenever
the number of MAC addresses stored in the FDB for this SAP
drops to the watermark specified by the object
svcTlsFdbTableFullLowWatermark."
::= { sapTraps 5 }
sapTlsDHCPLseStEntriesExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
tlsDhcpLseStateNewCiAddr,
tlsDhcpLseStateNewChAddr,
tlsDHCPClientLease
}
STATUS obsolete
DESCRIPTION "The sapTlsDHCPLseStEntriesExceeded notification is
generated when the number of DHCP lease states
entries on a given SAP reaches a user configurable
upper limit given by sapTlsDhcpLeasePopulate."
::= { sapTraps 6 }
sapTlsDHCPLeaseStateOverride NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
tlsDhcpLseStateNewCiAddr,
tlsDhcpLseStateNewChAddr,
tlsDhcpLseStateOldCiAddr,
tlsDhcpLseStateOldChAddr
}
STATUS obsolete
DESCRIPTION "The sapTlsDHCPLeaseStateOverride notification is
generated when an existing DHCP lease state is
overridden by a new lease state which has the same
IP address but a different MAC address."
::= { sapTraps 7 }
sapTlsDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
tlsDhcpPacketProblem
}
STATUS obsolete
DESCRIPTION "The sapTlsDHCPSuspiciousPcktRcvd notification is
generated when a DHCP packet is received with suspicious
content."
::= { sapTraps 8 }
sapDHCPLeaseEntriesExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpClientLease
}
STATUS current
DESCRIPTION "The sapDHCPLeaseEntriesExceeded notification is generated
when the number of DHCP lease state entries on a given SAP
reaches a user configurable upper limit. This limit is
given by sapTlsDhcpLeasePopulate for a TLS service and by
ALCATEL-IND1-TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or
VPRN service."
::= { sapTraps 9 }
sapDHCPLseStateOverride NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpLseStateOldCiAddr,
svcDhcpLseStateOldChAddr
}
STATUS current
DESCRIPTION "The sapDHCPLseStateOverride notification is generated when
an existing DHCP lease state is overridden by a new lease
state which has the same IP address but a different MAC
address."
::= { sapTraps 10 }
sapDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpPacketProblem
}
STATUS current
DESCRIPTION "The sapDHCPSuspiciousPcktRcvd notification is generated
when a DHCP packet is received with suspicious content."
::= { sapTraps 11 }
sapDHCPLseStatePopulateErr NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpLseStatePopulateError
}
STATUS current
DESCRIPTION "The sapDHCPLseStatePopulateErr notification indicates that
the system was unable to update the DHCP Lease State table
with the information contained in the DHCP ACK message.
The DHCP ACK message has been discarded."
::= { sapTraps 12 }
hostConnectivityLost NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
hostConnectivityCiAddrType,
hostConnectivityCiAddr,
hostConnectivityChAddr
}
STATUS current
DESCRIPTION "The hostConnectivityLost notification indicates that
the system lost the connectivity with the indicated host."
::= { sapTraps 13 }
hostConnectivityRestored NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
hostConnectivityCiAddrType,
hostConnectivityCiAddr,
hostConnectivityChAddr
}
STATUS current
DESCRIPTION "The hostConnectivityRestored notification indicates that
the system has restored the connectivity with the
indicated host."
::= { sapTraps 14 }
sapReceivedProtSrcMac NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue,
protectedMacForNotify
}
STATUS current
DESCRIPTION "The sapReceivedProtSrcMac notification is generated when a
protected source MAC is received on a TLS SAP with
sapTlsRestProtSrcMac 'true' and
sapTlsRestProtSrcMacAction 'alarm-only', or if the TLS
SAP belongs to an SHG with tlsShgRestProtSrcMac 'true'
and tlsShgRestProtSrcMacAction 'alarm-only'."
::= { sapTraps 15 }
sapStaticHostDynMacConflict NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue,
staticHostDynamicMacIpAddress,
staticHostDynamicMacConflict
}
STATUS current
DESCRIPTION "The sapStaticHostDynMacConflict notification indicates
that the system is trying to learn a conflicting IP-only
static host dynamic MAC address
(sapStaticHostDynMacAddress)."
::= { sapTraps 16 }
sapTlsMacMoveExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
sapAdminStatus,
sapOperStatus,
sapTlsMacMoveRateExcdLeft,
sapTlsMacMoveNextUpTime,
svcTlsMacMoveMaxRate
}
STATUS current
DESCRIPTION "The sapTlsMacMoveExceeded notification is generated
when the SAP exceeds the TLS svcTlsMacMoveMaxRate."
::= { sapTraps 17 }
sapDHCPProxyServerError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpProxyError
}
STATUS current
DESCRIPTION "The sapDHCPProxyServerError notification indicates that
the system was unable to proxy DHCP requests."
::= { sapTraps 18 }
sapDHCPCoAError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpCoAError
}
STATUS obsolete
DESCRIPTION "The sapDHCPCoAError notification indicates that
the system was unable to process a Change of Authorization
(CoA) request from a Radius server."
::= { sapTraps 19 }
sapDHCPSubAuthError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcDhcpSubAuthError
}
STATUS obsolete
DESCRIPTION "The sapDHCPSubAuthError notification indicates that
the system encountered a problem while trying to
authenticate a subscriber."
::= { sapTraps 20 }
sapPortStateChangeProcessed NOTIFICATION-TYPE
OBJECTS {
sapNotifyPortId
}
STATUS current
DESCRIPTION "The sapPortStateChangeProcessed notification indicates
that the agent has finished processing an access port
state change event, and that the operating status of
all the affected SAP's has been updated accordingly.
The value of the sapNotifyPortId object indicates the
ID of the port that experienced the state change."
::= { sapTraps 21 }
sapDHCPLseStateMobilityError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The sapDHCPLseStateMobilityError notification indicates
that the system was unable to perform a mobility check
for this lease state."
::= { sapTraps 22 }
sapCemPacketDefectAlarm NOTIFICATION-TYPE
OBJECTS {
custId,
svcVpnId,
sapCemReportAlarmStatus
}
STATUS current
DESCRIPTION "Generated when a CEM SAP alarm condition is detected.
It is generated only when the packet error indicated
by 'sapCemReportAlarmStatus' persists over a 3 second
window."
::= { sapTraps 23 }
sapCemPacketDefectAlarmClear NOTIFICATION-TYPE
OBJECTS {
custId,
svcVpnId,
sapCemReportAlarmStatus
}
STATUS current
DESCRIPTION "Generated when a CEM SAP alarm condition is cleared.
It is generated only when the packet error indicated
by 'sapCemReportAlarmStatus' no longer persists over
a 10 second window."
::= { sapTraps 24 }
msapStateChanged NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue,
msapStatus
}
STATUS current
DESCRIPTION "The msapStateChanged notification is generated when a
Managed SAP is 'created', 'modified', or 'deleted', with the
value of msapStatus indicated which state it has entered."
::= { sapTraps 25 }
msapCreationFailure NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sapPortId,
sapEncapValue,
svcManagedSapCreationError
}
STATUS current
DESCRIPTION "The trap msapCreationFailure is sent whenever
the system fails to create a managed SAP.
The svcId, svcVpnId, sapPortId and sapEncapValue are
those of the capturing SAP."
::= { sapTraps 26 }
-- ------------------------------------
-- TLS STP traps
-- ------------------------------------
topologyChangeSapMajorState NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The topologyChangeSapMajorState notification is
generated when a SAP has transitioned its state from
learning to forwarding or from forwarding to blocking
or broken. The spanning tree topology has been modified
and it may denote loss of customer access or
redundancy. Check the new topology against the
provisioned topology to determine the severity of
connectivity loss."
::= { tstpTraps 1 }
newRootSap NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The newRootSap notification is generated when the
previous root bridge has been aged out and a new root
bridge has been elected. A new root bridge creates a
new spanning tree topology and it may denote loss of
customer access or redundancy. Check the new topology
against the provisioned topology to determine the
severity of connectivity loss."
::= { tstpTraps 2 }
topologyChangeSapState NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The topologyChangeSapState notification is generated
when a SAP has transitioned state to blocking or
broken from a state other than forwarding. This event
complements what is not covered by
topologyChangeSapMajorState. The spanning tree
topology has been modified and it may denote loss of
customer access or redundancy. Check the new topology
against the provisioned topology to determine severity
of connectivity loss."
::= { tstpTraps 5 }
receivedTCN NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue
}
STATUS current
DESCRIPTION "The receivedTCN notification is generated when a SAP
has received TCN from another bridge. This bridge will
either have its configured BPDU with the topology
change flag set if it is a root bridge, or it will
pass TCN to its root bridge. Eventually the address
aging timer for the forwarding database will be made
shorter for a short period of time. No recovery is
needed."
::= { tstpTraps 6 }
higherPriorityBridge NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue,
tmnxCustomerBridgeId,
tmnxCustomerRootBridgeId
}
STATUS current
DESCRIPTION "The higherPriorityBridge notification is generated when
a customer's device has been configured with a bridge
priority equal to zero. The SAP that the customer's
device is connected through will be blocked. Remove
the customer's device or reconfigure the customer's
bridge priority with a value greater than zero."
::= { tstpTraps 9 }
bridgedTLS NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue
}
STATUS obsolete
DESCRIPTION "The bridgedTLS notification is generated when a
configuration BPDU has been received that identifies
that another TLS with a different VPNID is attempting
to bridge with this TLS. At least one ESR
participating within one of the TLS that is locally
connected must have an active VCP for this to be seen.
The SAP that the configuration BPDU is received on
will be blocked to prevent the TLS to TLS bridging.
Reconfigure the bridged TLS into a single TLS or
remove the connectivity."
::= { tstpTraps 10 }
sapEncapPVST NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue,
tmnxOtherBridgeId
}
STATUS current
DESCRIPTION "The sapEncapPVST notification is generated when the
SAP receives a BPDU that is PVST encapsulated, after
having received BPDUs that were 802.d encapsulated.
The SAP BPDUs will also be PVST encapsulated. No
recovery is needed."
::= { tstpTraps 11 }
sapEncapDot1d NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue,
tmnxOtherBridgeId
}
STATUS current
DESCRIPTION "The sapEncapDot1d notification is generated when the
SAP receives a BPDU that is 802.1d encapsulated after
having received BPDUs that were PVST encapsulated. The
SAP BPDUs will also be 802.1d encapsulated. No
recovery is needed."
::= { tstpTraps 12 }
sapReceiveOwnBpdu NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue,
tmnxOtherBridgeId
}
STATUS obsolete
DESCRIPTION "The sapReceiveOwnBpdu notification is generated when the
SAP STP received it's own BPDU."
::= { tstpTraps 13 }
sapActiveProtocolChange NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue,
sapTlsStpOperProtocol
}
STATUS current
DESCRIPTION "The sapActiveProtocolChange notification is generated
when the spanning tree protocol on this SAP changes
from rstp to stp or vise versa. No recovery is
needed."
::= { tstpTraps 30 }
tmnxStpRootGuardViolation NOTIFICATION-TYPE
OBJECTS {
svcId,
sapPortId,
sapEncapValue,
sapTlsStpRootGuardViolation
}
STATUS current
DESCRIPTION "The tmnxStpRootGuardViolation notification is
generated when a SAP which has root-guard configured is
trying to become root (has a better STP priority vector).
The SAP will become alternate and traffic will be blocked."
::= { tstpTraps 35 }
tmnxSapStpExcepCondStateChng NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sapPortId,
sapEncapValue,
sapTlsStpException
}
STATUS current
DESCRIPTION "The tmnxSapStpExcepCondStateChng notification is
generated when the value of the object sapTlsStpException
has changed, i.e. when the exception condition
changes on the indicated SAP."
::= { tstpTraps 37 }
-- ----------------------------------------------------------------------------
-- Conformance Information
-- ----------------------------------------------------------------------------
tmnxSapCompliances OBJECT IDENTIFIER ::= { tmnxSapConformance 1 }
tmnxSapGroups OBJECT IDENTIFIER ::= { tmnxSapConformance 2 }
-- ----------------------------------------------
-- Compliance Statements
-- ----------------------------------------------
tmnxSap7450V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SAPs
on Alcatel 7450 ESS series systems."
MODULE -- this module
MANDATORY-GROUPS
{
tmnxSapV6v0Group,
tmnxSapTlsV6v0Group,
tmnxSapBaseV6v0Group,
-- tmnxSapAtmV6v0Group,
tmnxSapQosV6v0Group,
tmnxSapStaticHostV6v0Group,
tmnxSapPortIdV6v0Group,
tmnxSapSubMgmtV6v0Group,
tmnxSapMstiV6v0Group,
tmnxSapIppipeV6v0Group,
tmnxSapPolicyV6v0Group,
tmnxSapL2ptV6v0Group,
tmnxSapMsapV6v0Group,
tmnxSapNotifyGroup,
-- tmnxSapCemNotificationV6v0Group,
-- tmnxTlsMsapPppoeV6v0Group,
-- tmnxSapCemV6v0Group
-- tmnxSapIpV6FilterV6v0Group
tmnxSapDhcpV6v0Group,
tmnxSapMrpV6v0Group
-- tmnxSapBsxV6v0Group
}
::= { tmnxSapCompliances 100 }
tmnxSap7750V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SAPs
on Alcatel 7750 SR series systems."
MODULE -- this module
MANDATORY-GROUPS
{
tmnxSapV6v0Group,
tmnxSapTlsV6v0Group,
tmnxSapBaseV6v0Group,
tmnxSapAtmV6v0Group,
tmnxSapQosV6v0Group,
tmnxSapStaticHostV6v0Group,
tmnxSapPortIdV6v0Group,
tmnxSapSubMgmtV6v0Group,
tmnxSapMstiV6v0Group,
tmnxSapIppipeV6v0Group,
tmnxSapPolicyV6v0Group,
tmnxSapL2ptV6v0Group,
tmnxSapMsapV6v0Group,
tmnxSapNotifyGroup,
-- tmnxSapCemNotificationV6v0Group,
tmnxTlsMsapPppoeV6v0Group,
tmnxSapCemV6v0Group,
tmnxSapIpV6FilterV6v0Group,
tmnxSapDhcpV6v0Group,
tmnxSapMrpV6v0Group
-- tmnxSapBsxV6v0Group
}
::= { tmnxSapCompliances 101 }
tmnxSap7710V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SAPs
on Alcatel 7710 SR series systems."
MODULE -- this module
MANDATORY-GROUPS
{
tmnxSapV6v0Group,
tmnxSapTlsV6v0Group,
tmnxSapBaseV6v0Group,
tmnxSapAtmV6v0Group,
tmnxSapQosV6v0Group,
tmnxSapStaticHostV6v0Group,
tmnxSapPortIdV6v0Group,
tmnxSapSubMgmtV6v0Group,
tmnxSapMstiV6v0Group,
tmnxSapIppipeV6v0Group,
tmnxSapPolicyV6v0Group,
tmnxSapL2ptV6v0Group,
tmnxSapMsapV6v0Group,
tmnxSapNotifyGroup,
tmnxSapCemNotificationV6v0Group,
tmnxTlsMsapPppoeV6v0Group,
tmnxSapCemV6v0Group,
tmnxSapIpV6FilterV6v0Group,
tmnxSapDhcpV6v0Group,
tmnxSapMrpV6v0Group
-- tmnxSapBsxV6v0Group no Application Assurance on 7710
}
::= { tmnxSapCompliances 102 }
-- ----------------------
-- SAP Group
-- ----------------------
tmnxSapV6v0Group OBJECT-GROUP
OBJECTS {
sapNumEntries,
sapPortId,
sapEncapValue,
sapRowStatus,
sapType,
sapDescription,
sapAdminStatus,
sapOperStatus,
sapIngressQosPolicyId,
sapIngressMacFilterId,
sapIngressIpFilterId,
sapIngressVlanTranslationId,
sapEgressQosPolicyId,
sapEgressMacFilterId,
sapEgressIpFilterId,
sapMirrorStatus,
sapIesIfIndex,
sapLastMgmtChange,
sapCollectAcctStats,
sapAccountingPolicyId,
sapVpnId,
sapCustId,
sapCustMultSvcSite,
sapIngressQosSchedulerPolicy,
sapEgressQosSchedulerPolicy,
sapSplitHorizonGrp,
sapIngressSharedQueuePolicy,
sapIngressMatchQinQDot1PBits,
sapOperFlags,
sapLastStatusChange,
sapAntiSpoofing,
sapTodSuite,
sapIngUseMultipointShared,
sapEgressQinQMarkTopOnly,
sapEgressAggRateLimit,
sapEndPoint,
sapIngressVlanTranslation,
sapSubType,
sapCpmProtPolicyId,
sapCpmProtMonitorMac,
sapEgressFrameBasedAccounting,
sapEthernetLLFAdminStatus,
sapEthernetLLFOperStatus,
sapTlsMvplsRowStatus,
sapAntiSpoofIpAddress,
sapAntiSpoofMacAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
general capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 100 }
tmnxSapTlsV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsStpAdminStatus,
sapTlsStpPriority,
sapTlsStpPortNum,
sapTlsStpPathCost,
sapTlsStpRapidStart,
sapTlsStpBpduEncap,
sapTlsStpPortState,
sapTlsStpDesignatedBridge,
sapTlsStpDesignatedPort,
sapTlsStpForwardTransitions,
sapTlsStpInConfigBpdus,
sapTlsStpInTcnBpdus,
sapTlsStpInBadBpdus,
sapTlsStpOutConfigBpdus,
sapTlsStpOutTcnBpdus,
sapTlsStpOperBpduEncap,
sapTlsVpnId,
sapTlsCustId,
sapTlsMacAddressLimit,
sapTlsNumMacAddresses,
sapTlsNumStaticMacAddresses,
sapTlsMacLearning,
sapTlsMacAgeing,
sapTlsStpOperEdge,
sapTlsStpAdminPointToPoint,
sapTlsStpPortRole,
sapTlsStpAutoEdge,
sapTlsStpOperProtocol,
sapTlsStpInRstBpdus,
sapTlsStpOutRstBpdus,
sapTlsLimitMacMove,
sapTlsMacPinning,
sapTlsDiscardUnknownSource,
sapTlsMvplsPruneState,
sapTlsMvplsMgmtService,
sapTlsMvplsMgmtPortId,
sapTlsMvplsMgmtEncapValue,
sapTlsArpReplyAgent,
sapTlsStpException,
sapTlsAuthenticationPolicy,
sapTlsL2ptTermination,
sapTlsBpduTranslation,
sapTlsStpRootGuard,
sapTlsStpInsideRegion,
sapTlsEgressMcastGroup,
sapTlsStpInMstBpdus,
sapTlsStpOutMstBpdus,
sapTlsRestProtSrcMac,
sapTlsRestProtSrcMacAction,
sapTlsRestUnprotDstMac,
sapTlsStpRxdDesigBridge,
sapTlsStpRootGuardViolation,
sapTlsShcvAction,
sapTlsShcvSrcIp,
sapTlsShcvSrcMac,
sapTlsShcvInterval,
sapTlsMvplsMgmtMsti,
sapTlsMacMoveNextUpTime,
sapTlsMacMoveRateExcdLeft,
sapTlsL2ptForceBoundary,
sapTlsLimitMacMoveLevel,
sapTlsBpduTransOper,
sapTlsDefMsapPolicy,
sapTlsL2ptProtocols,
sapTlsL2ptForceProtocols,
sapTlsDhcpMsapTrigger,
sapTlsDhcpProxyLeaseTime,
sapTlsDhcpRemoteId,
sapTlsMrpJoinTime,
sapTlsMrpLeaveTime,
sapTlsMrpLeaveAllTime,
sapTlsMrpPeriodicTime,
sapTlsMrpPeriodicEnabled
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
TLS capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 101 }
tmnxSapAtmV6v0Group OBJECT-GROUP
OBJECTS {
sapAtmEncapsulation,
sapAtmIngressTrafficDescIndex,
sapAtmEgressTrafficDescIndex,
sapAtmOamAlarmCellHandling,
sapAtmOamTerminate,
sapAtmOamPeriodicLoopback
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
ATM capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 102 }
tmnxSapBaseV6v0Group OBJECT-GROUP
OBJECTS {
sapBaseStatsIngressPchipDroppedPackets,
sapBaseStatsIngressPchipDroppedOctets,
sapBaseStatsIngressPchipOfferedHiPrioPackets,
sapBaseStatsIngressPchipOfferedHiPrioOctets,
sapBaseStatsIngressPchipOfferedLoPrioPackets,
sapBaseStatsIngressPchipOfferedLoPrioOctets,
sapBaseStatsIngressQchipDroppedHiPrioPackets,
sapBaseStatsIngressQchipDroppedHiPrioOctets,
sapBaseStatsIngressQchipDroppedLoPrioPackets,
sapBaseStatsIngressQchipDroppedLoPrioOctets,
sapBaseStatsIngressQchipForwardedInProfPackets,
sapBaseStatsIngressQchipForwardedInProfOctets,
sapBaseStatsIngressQchipForwardedOutProfPackets,
sapBaseStatsIngressQchipForwardedOutProfOctets,
sapBaseStatsEgressQchipDroppedInProfPackets,
sapBaseStatsEgressQchipDroppedInProfOctets,
sapBaseStatsEgressQchipDroppedOutProfPackets,
sapBaseStatsEgressQchipDroppedOutProfOctets,
sapBaseStatsEgressQchipForwardedInProfPackets,
sapBaseStatsEgressQchipForwardedInProfOctets,
sapBaseStatsEgressQchipForwardedOutProfPackets,
sapBaseStatsEgressQchipForwardedOutProfOctets,
sapBaseStatsCustId,
sapBaseStatsIngressPchipOfferedUncoloredPackets,
sapBaseStatsIngressPchipOfferedUncoloredOctets,
sapBaseStatsAuthenticationPktsDiscarded,
sapBaseStatsAuthenticationPktsSuccess,
sapBaseStatsLastClearedTime
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
Base capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 103 }
tmnxSapQosV6v0Group OBJECT-GROUP
OBJECTS {
sapIngQosQueueId,
sapIngQosQueueStatsOfferedHiPrioPackets,
sapIngQosQueueStatsDroppedHiPrioPackets,
sapIngQosQueueStatsOfferedLoPrioPackets,
sapIngQosQueueStatsDroppedLoPrioPackets,
sapIngQosQueueStatsOfferedHiPrioOctets,
sapIngQosQueueStatsDroppedHiPrioOctets,
sapIngQosQueueStatsOfferedLoPrioOctets,
sapIngQosQueueStatsDroppedLoPrioOctets,
sapIngQosQueueStatsForwardedInProfPackets,
sapIngQosQueueStatsForwardedOutProfPackets,
sapIngQosQueueStatsForwardedInProfOctets,
sapIngQosQueueStatsForwardedOutProfOctets,
sapIngQosCustId,
sapIngQosQueueStatsUncoloredPacketsOffered,
sapIngQosQueueStatsUncoloredOctetsOffered,
sapEgrQosQueueId,
sapEgrQosQueueStatsForwardedInProfPackets,
sapEgrQosQueueStatsDroppedInProfPackets,
sapEgrQosQueueStatsForwardedOutProfPackets,
sapEgrQosQueueStatsDroppedOutProfPackets,
sapEgrQosQueueStatsForwardedInProfOctets,
sapEgrQosQueueStatsDroppedInProfOctets,
sapEgrQosQueueStatsForwardedOutProfOctets,
sapEgrQosQueueStatsDroppedOutProfOctets,
sapEgrQosCustId,
sapIngQosSchedStatsForwardedPackets,
sapIngQosSchedStatsForwardedOctets,
sapIngQosSchedCustId,
sapEgrQosSchedStatsForwardedPackets,
sapEgrQosSchedStatsForwardedOctets,
sapEgrQosSchedCustId,
sapIngQosQRowStatus,
sapIngQosQLastMgmtChange,
sapIngQosQOverrideFlags,
sapIngQosQCBS,
sapIngQosQMBS,
sapIngQosQHiPrioOnly,
sapIngQosQCIRAdaptation,
sapIngQosQPIRAdaptation,
sapIngQosQAdminPIR,
sapIngQosQAdminCIR,
sapEgrQosQRowStatus,
sapEgrQosQLastMgmtChange,
sapEgrQosQOverrideFlags,
sapEgrQosQCBS,
sapEgrQosQMBS,
sapEgrQosQHiPrioOnly,
sapEgrQosQCIRAdaptation,
sapEgrQosQPIRAdaptation,
sapEgrQosQAdminPIR,
sapEgrQosQAdminCIR,
sapEgrQosQAvgOverhead,
sapIngQosSRowStatus,
sapIngQosSLastMgmtChange,
sapIngQosSOverrideFlags,
sapIngQosSPIR,
sapIngQosSCIR,
sapIngQosSSummedCIR,
sapEgrQosSRowStatus,
sapEgrQosSLastMgmtChange,
sapEgrQosSOverrideFlags,
sapEgrQosSPIR,
sapEgrQosSCIR,
sapEgrQosSSummedCIR
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
Ingress/Egress QoS capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 104 }
tmnxSapStaticHostV6v0Group OBJECT-GROUP
OBJECTS {
sapStaticHostRowStatus,
sapStaticHostSubscrIdent,
sapStaticHostSubProfile,
sapStaticHostSlaProfile,
sapStaticHostShcvOperState,
sapStaticHostShcvChecks,
sapStaticHostShcvReplies,
sapStaticHostShcvReplyTime,
sapStaticHostDynMacAddress,
sapStaticHostRetailerSvcId,
sapStaticHostRetailerIf,
sapStaticHostFwdingState,
sapStaticHostAncpString,
sapStaticHostSubIdIsSapId,
sapStaticHostIntermediateDestId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
static host capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 105 }
tmnxSapDhcpV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsDhcpAdminState,
sapTlsDhcpDescription,
sapTlsDhcpSnoop,
sapTlsDhcpLeasePopulate,
sapTlsDhcpOperLeasePopulate,
sapTlsDhcpInfoAction,
sapTlsDhcpCircuitId,
sapTlsDhcpRemoteIdString,
sapTlsDhcpProxyAdminState,
sapTlsDhcpProxyServerAddr,
sapTlsDhcpProxyLTRadiusOverride,
sapTlsDhcpVendorIncludeOptions,
sapTlsDhcpVendorOptionString,
sapTlsDhcpStatsClntSnoopdPckts,
sapTlsDhcpStatsSrvrSnoopdPckts,
sapTlsDhcpStatsClntForwdPckts,
sapTlsDhcpStatsSrvrForwdPckts,
sapTlsDhcpStatsClntDropdPckts,
sapTlsDhcpStatsSrvrDropdPckts,
sapTlsDhcpStatsClntProxRadPckts,
sapTlsDhcpStatsClntProxLSPckts,
sapTlsDhcpStatsGenReleasePckts,
sapTlsDhcpStatsGenForceRenPckts,
sapDhcpOperLeasePopulate
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
TLS DHCP capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 106 }
tmnxSapPortIdV6v0Group OBJECT-GROUP
OBJECTS {
sapPortIdIngQosSchedFwdPkts,
sapPortIdIngQosSchedFwdOctets,
sapPortIdIngQosSchedCustId,
sapPortIdEgrQosSchedFwdPkts,
sapPortIdEgrQosSchedFwdOctets,
sapPortIdEgrQosSchedCustId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
Port ID capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 107 }
tmnxSapSubMgmtV6v0Group OBJECT-GROUP
OBJECTS {
sapSubMgmtAdminStatus,
sapSubMgmtDefSubProfile,
sapSubMgmtDefSlaProfile,
sapSubMgmtSubIdentPolicy,
sapSubMgmtSubscriberLimit,
sapSubMgmtProfiledTrafficOnly,
sapSubMgmtNonSubTrafficSubIdent,
sapSubMgmtNonSubTrafficSubProf,
sapSubMgmtNonSubTrafficSlaProf,
sapSubMgmtMacDaHashing,
sapSubMgmtDefSubIdent,
sapSubMgmtDefSubIdentString
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
Sub-management capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 108 }
tmnxSapMstiV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsMstiPriority,
sapTlsMstiPathCost,
sapTlsMstiLastMgmtChange,
sapTlsMstiPortRole,
sapTlsMstiPortState,
sapTlsMstiDesignatedBridge,
sapTlsMstiDesignatedPort
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
TLS MSTI capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 109 }
tmnxSapIppipeV6v0Group OBJECT-GROUP
OBJECTS {
sapIpipeCeInetAddress,
sapIpipeCeInetAddressType,
sapIpipeMacRefreshInterval,
sapIpipeMacAddress,
sapIpipeArpedMacAddress,
sapIpipeArpedMacAddressTimeout
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
I-Pipe capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 110 }
tmnxSapPolicyV6v0Group OBJECT-GROUP
OBJECTS {
sapCurrentIngressIpFilterId,
sapCurrentIngressMacFilterId,
sapCurrentIngressQosPolicyId,
sapCurrentIngressQosSchedPlcy,
sapCurrentEgressIpFilterId,
sapCurrentEgressMacFilterId,
sapCurrentEgressQosPolicyId,
sapCurrentEgressQosSchedPlcy,
sapIntendedIngressIpFilterId,
sapIntendedIngressMacFilterId,
sapIntendedIngressQosPolicyId,
sapIntendedIngressQosSchedPlcy,
sapIntendedEgressIpFilterId,
sapIntendedEgressMacFilterId,
sapIntendedEgressQosPolicyId,
sapIntendedEgressQosSchedPlcy,
sapIgQosPlcyDroppedHiPrioPackets,
sapIgQosPlcyDroppedHiPrioOctets,
sapIgQosPlcyDroppedLoPrioPackets,
sapIgQosPlcyDroppedLoPrioOctets,
sapIgQosPlcyForwardedInProfPackets,
sapIgQosPlcyForwardedInProfOctets,
sapIgQosPlcyForwardedOutProfPackets,
sapIgQosPlcyForwardedOutProfOctets,
sapEgQosPlcyDroppedInProfPackets,
sapEgQosPlcyDroppedInProfOctets,
sapEgQosPlcyDroppedOutProfPackets,
sapEgQosPlcyDroppedOutProfOctets,
sapEgQosPlcyForwardedInProfPackets,
sapEgQosPlcyForwardedInProfOctets,
sapEgQosPlcyForwardedOutProfPackets,
sapEgQosPlcyForwardedOutProfOctets,
sapIgQosPlcyQueueStatsOfferedHiPrioPackets,
sapIgQosPlcyQueueStatsDroppedHiPrioPackets,
sapIgQosPlcyQueueStatsOfferedLoPrioPackets,
sapIgQosPlcyQueueStatsDroppedLoPrioPackets,
sapIgQosPlcyQueueStatsOfferedHiPrioOctets,
sapIgQosPlcyQueueStatsDroppedHiPrioOctets,
sapIgQosPlcyQueueStatsOfferedLoPrioOctets,
sapIgQosPlcyQueueStatsDroppedLoPrioOctets,
sapIgQosPlcyQueueStatsForwardedInProfPackets,
sapIgQosPlcyQueueStatsForwardedOutProfPackets,
sapIgQosPlcyQueueStatsForwardedInProfOctets,
sapIgQosPlcyQueueStatsForwardedOutProfOctets,
sapIgQosPlcyQueueCustId,
sapIgQosPlcyQueueStatsUncoloredPacketsOffered,
sapIgQosPlcyQueueStatsUncoloredOctetsOffered,
sapEgQosPlcyQueueStatsForwardedInProfPackets,
sapEgQosPlcyQueueStatsDroppedInProfPackets,
sapEgQosPlcyQueueStatsForwardedOutProfPackets,
sapEgQosPlcyQueueStatsDroppedOutProfPackets,
sapEgQosPlcyQueueStatsForwardedInProfOctets,
sapEgQosPlcyQueueStatsDroppedInProfOctets,
sapEgQosPlcyQueueStatsForwardedOutProfOctets,
sapEgQosPlcyQueueStatsDroppedOutProfOctets,
sapEgQosPlcyQueueCustId,
sapIngSchedPlcyStatsFwdPkt,
sapIngSchedPlcyStatsFwdOct,
sapEgrSchedPlcyStatsFwdPkt,
sapEgrSchedPlcyStatsFwdOct,
sapEgrSchedPlcyPortStatsPort,
sapIngSchedPlcyPortStatsFwdPkt,
sapIngSchedPlcyPortStatsFwdOct,
sapIngSchedPlcyPortStatsPort,
sapEgrSchedPlcyPortStatsFwdPkt,
sapEgrSchedPlcyPortStatsFwdOct
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
ingress/egress capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 111 }
tmnxSapCemV6v0Group OBJECT-GROUP
OBJECTS {
sapCemLastMgmtChange,
sapCemEndpointType,
sapCemBitrate,
sapCemCasTrunkFraming,
sapCemPayloadSize,
sapCemJitterBuffer,
sapCemUseRtpHeader,
sapCemDifferential,
sapCemTimestampFreq,
sapCemReportAlarm,
sapCemReportAlarmStatus,
sapCemLocalEcid,
sapCemRemoteMacAddr,
sapCemRemoteEcid,
sapCemStatsIngressForwardedPkts,
sapCemStatsIngressDroppedPkts,
sapCemStatsEgressForwardedPkts,
sapCemStatsEgressDroppedPkts,
sapCemStatsEgressMissingPkts,
sapCemStatsEgressPktsReOrder,
sapCemStatsEgressJtrBfrUnderruns,
sapCemStatsEgressJtrBfrOverruns,
sapCemStatsEgressMisOrderDropped,
sapCemStatsEgressMalformedPkts,
sapCemStatsEgressLBitDropped,
sapCemStatsEgressMultipleDropped,
sapCemStatsEgressESs,
sapCemStatsEgressSESs,
sapCemStatsEgressUASs,
sapCemStatsEgressFailureCounts,
sapCemStatsEgressUnderrunCounts,
sapCemStatsEgressOverrunCounts
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
Cem capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 112 }
tmnxSapL2ptV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsL2ptStatsLastClearedTime,
sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx,
sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx,
sapTlsL2ptStatsL2ptEncapStpRstBpdusRx,
sapTlsL2ptStatsL2ptEncapStpRstBpdusTx,
sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx,
sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx,
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx,
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx,
sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx,
sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx,
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx,
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx,
sapTlsL2ptStatsStpConfigBpdusRx,
sapTlsL2ptStatsStpConfigBpdusTx,
sapTlsL2ptStatsStpRstBpdusRx,
sapTlsL2ptStatsStpRstBpdusTx,
sapTlsL2ptStatsStpTcnBpdusRx,
sapTlsL2ptStatsStpTcnBpdusTx,
sapTlsL2ptStatsPvstConfigBpdusRx,
sapTlsL2ptStatsPvstConfigBpdusTx,
sapTlsL2ptStatsPvstRstBpdusRx,
sapTlsL2ptStatsPvstRstBpdusTx,
sapTlsL2ptStatsPvstTcnBpdusRx,
sapTlsL2ptStatsPvstTcnBpdusTx,
sapTlsL2ptStatsOtherBpdusRx,
sapTlsL2ptStatsOtherBpdusTx,
sapTlsL2ptStatsOtherL2ptBpdusRx,
sapTlsL2ptStatsOtherL2ptBpdusTx,
sapTlsL2ptStatsOtherInvalidBpdusRx,
sapTlsL2ptStatsOtherInvalidBpdusTx,
sapTlsL2ptStatsL2ptEncapCdpBpdusRx,
sapTlsL2ptStatsL2ptEncapCdpBpdusTx,
sapTlsL2ptStatsL2ptEncapVtpBpdusRx,
sapTlsL2ptStatsL2ptEncapVtpBpdusTx,
sapTlsL2ptStatsL2ptEncapDtpBpdusRx,
sapTlsL2ptStatsL2ptEncapDtpBpdusTx,
sapTlsL2ptStatsL2ptEncapPagpBpdusRx,
sapTlsL2ptStatsL2ptEncapPagpBpdusTx,
sapTlsL2ptStatsL2ptEncapUdldBpdusRx,
sapTlsL2ptStatsL2ptEncapUdldBpdusTx,
sapTlsL2ptStatsCdpBpdusRx,
sapTlsL2ptStatsCdpBpdusTx,
sapTlsL2ptStatsVtpBpdusRx,
sapTlsL2ptStatsVtpBpdusTx,
sapTlsL2ptStatsDtpBpdusRx,
sapTlsL2ptStatsDtpBpdusTx,
sapTlsL2ptStatsPagpBpdusRx,
sapTlsL2ptStatsPagpBpdusTx,
sapTlsL2ptStatsUdldBpdusRx,
sapTlsL2ptStatsUdldBpdusTx
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
TLS L2pt capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 113 }
tmnxSapMsapV6v0Group OBJECT-GROUP
OBJECTS {
msapPlcyRowStatus,
msapPlcyLastChanged,
msapPlcyDescription,
msapPlcyCpmProtPolicyId,
msapPlcyCpmProtMonitorMac,
msapPlcySubMgmtDefSubId,
msapPlcySubMgmtDefSubIdStr,
msapPlcySubMgmtDefSubProfile,
msapPlcySubMgmtDefSlaProfile,
msapPlcySubMgmtSubIdPlcy,
msapPlcySubMgmtSubscriberLimit,
msapPlcySubMgmtProfiledTrafOnly,
msapPlcySubMgmtNonSubTrafSubId,
msapPlcySubMgmtNonSubTrafSubProf,
msapPlcySubMgmtNonSubTrafSlaProf,
msapPlcyAssociatedMsaps,
msapTlsPlcyLastChanged,
msapTlsPlcySplitHorizonGrp,
msapTlsPlcyArpReplyAgent,
msapTlsPlcySubMgmtMacDaHashing,
msapTlsPlcyDhcpLeasePopulate,
msapTlsPlcyDhcpPrxyAdminState,
msapTlsPlcyDhcpPrxyServAddr,
msapTlsPlcyDhcpPrxyServAddrType,
msapTlsPlcyDhcpPrxyLTRadOverride,
msapTlsPlcyDhcpInfoAction,
msapTlsPlcyDhcpCircuitId,
msapTlsPlcyDhcpRemoteId,
msapTlsPlcyDhcpRemoteIdString,
msapTlsPlcyDhcpVendorInclOpts,
msapTlsPlcyDhcpVendorOptStr,
msapTlsPlcyDhcpPrxyLeaseTime,
msapTlsPlcyEgressMcastGroup,
msapTlsPlcyIgmpSnpgImportPlcy,
msapTlsPlcyIgmpSnpgFastLeave,
msapTlsPlcyIgmpSnpgSendQueries,
msapTlsPlcyIgmpSnpgGenQueryIntv,
msapTlsPlcyIgmpSnpgQueryRespIntv,
msapTlsPlcyIgmpSnpgRobustCount,
msapTlsPlcyIgmpSnpgLastMembIntvl,
msapTlsPlcyIgmpSnpgMaxNbrGrps,
msapTlsPlcyIgmpSnpgMvrFromVplsId,
msapTlsPlcyIgmpSnpgVersion,
msapTlsPlcyIgmpSnpgMcacPlcyName,
msapTlsPlcyIgmpSnpgMcacPrRsvMnBW,
msapTlsPlcyIgmpSnpgMcacUncnstBW,
msapIgmpSnpgMcacLevelRowStatus,
msapIgmpSnpgMcacLevelLastChanged,
msapIgmpSnpgMcacLevelBW,
msapIgmpSnpgMcacLagRowStatus,
msapIgmpSnpgMcacLagLastChanged,
msapIgmpSnpgMcacLagLevel,
msapInfoCreationSapPortEncapVal,
msapInfoCreationPlcyName,
msapInfoReEvalPolicy,
msapInfoLastChanged,
msapCaptureSapStatsPktsRecvd,
msapCaptureSapStatsPktsRedirect,
msapCaptureSapStatsPktsDropped,
msapPlcyTblLastChgd,
msapTlsPlcyTblLastChgd,
msapIgmpSnpgMcacLvlTblLastChgd,
msapIgmpSnpgMcacLagTblLastChgd,
msapInfoTblLastChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting management of
managed SAP capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 114 }
tmnxSapMrpV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsMrpRxPdus,
sapTlsMrpDroppedPdus,
sapTlsMrpTxPdus,
sapTlsMrpRxNewEvent,
sapTlsMrpRxJoinInEvent,
sapTlsMrpRxInEvent,
sapTlsMrpRxJoinEmptyEvent,
sapTlsMrpRxEmptyEvent,
sapTlsMrpRxLeaveEvent,
sapTlsMrpTxNewEvent,
sapTlsMrpTxJoinInEvent,
sapTlsMrpTxInEvent,
sapTlsMrpTxJoinEmptyEvent,
sapTlsMrpTxEmptyEvent,
sapTlsMrpTxLeaveEvent,
sapTlsMmrpDeclared,
sapTlsMmrpRegistered
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap
MRP capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 115 }
tmnxTlsMsapPppoeV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsPppoeMsapTrigger
}
STATUS current
DESCRIPTION
"The group of objects supporting PPPOE on Managed SAPs
feature on the Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 117 }
tmnxSapIpV6FilterV6v0Group OBJECT-GROUP
OBJECTS {
sapIngressIpv6FilterId,
sapEgressIpv6FilterId,
sapCurrentIngressIpv6FilterId,
sapCurrentEgressIpv6FilterId,
sapIntendedIngressIpv6FilterId,
sapIntendedEgressIpv6FilterId
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Sap Ingress Policy
capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 118 }
tmnxSapBsxV6v0Group OBJECT-GROUP
OBJECTS {
sapStaticHostAppProfile,
sapSubMgmtDefAppProfile,
sapSubMgmtNonSubTrafficAppProf,
msapPlcySubMgmtDefAppProfile,
msapPlcySubMgmtNonSubTrafAppProf
}
STATUS current
DESCRIPTION
"The group of objects supporting management of BSX (Application
Assurance) capabilities on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 119 }
-- Notification objects
tmnxSapNotificationObjV6v0Group OBJECT-GROUP
OBJECTS {
sapNotifyPortId,
svcManagedSapCreationError,
msapStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting management of notifications
on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 200 }
-- Obsoleted Group
tmnxSapObsoletedV6v0Group OBJECT-GROUP
OBJECTS {
sapTlsDhcpSnooping,
sapTlsDhcpLseStateRemainLseTime,
sapTlsDhcpLseStateOption82,
sapTlsDhcpLseStatePersistKey
}
STATUS current
DESCRIPTION
"The group of obsolete objects for the services feature
on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 300 }
-- NOTIFICATION Group
tmnxSapNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
sapStatusChanged,
sapTlsMacAddrLimitAlarmRaised,
sapTlsMacAddrLimitAlarmCleared,
sapDHCPLeaseEntriesExceeded,
sapDHCPLseStateOverride,
sapDHCPSuspiciousPcktRcvd,
sapDHCPLseStatePopulateErr,
hostConnectivityLost,
hostConnectivityRestored,
sapReceivedProtSrcMac,
sapStaticHostDynMacConflict,
sapTlsMacMoveExceeded,
sapDHCPProxyServerError,
sapPortStateChangeProcessed,
sapDHCPLseStateMobilityError,
msapStateChanged,
msapCreationFailure,
topologyChangeSapMajorState,
newRootSap,
topologyChangeSapState,
receivedTCN,
higherPriorityBridge,
sapEncapPVST,
sapEncapDot1d,
sapActiveProtocolChange,
tmnxStpRootGuardViolation,
tmnxSapStpExcepCondStateChng
}
STATUS current
DESCRIPTION
"The group of obsolete notifications for the Sap feature
on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 400 }
tmnxSapCemNotificationV6v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sapCemPacketDefectAlarm,
sapCemPacketDefectAlarmClear
}
STATUS current
DESCRIPTION
"The group of notifications supporting the CEM Sap feature
on Alcatel 7710 SR series systems."
::= { tmnxSapGroups 401 }
tmnxSapObsoletedNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
sapCreated,
sapDeleted,
sapTlsDHCPLseStEntriesExceeded,
sapTlsDHCPLeaseStateOverride,
sapTlsDHCPSuspiciousPcktRcvd,
sapDHCPCoAError,
sapDHCPSubAuthError,
bridgedTLS,
sapReceiveOwnBpdu
}
STATUS current
DESCRIPTION
"The group of obsolete notifications for the Sap feature
on Alcatel 7x50 SR series systems."
::= { tmnxSapGroups 402 }
END