mibs/nokia/aos7/ALCATEL-IND1-TRAP-MGR-MIB
ALCATEL-IND1-TRAP-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY,
OBJECT-IDENTITY,
IpAddress,
Integer32, Unsigned32,
Counter32,
NOTIFICATION-TYPE FROM SNMPv2-SMI
DateAndTime,
RowStatus FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
softentIND1TrapMgr FROM ALCATEL-IND1-BASE
InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
alcatelIND1TrapMgrMIB MODULE-IDENTITY
LAST-UPDATED "201005130000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Trap Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201005130000Z"
DESCRIPTION
"Fixed the Notifications to use MIB Module OID.0 as Notifications root."
REVISION "200708070000Z"
DESCRIPTION
"The latest version of this MIB Module."
REVISION "201409180000Z"
DESCRIPTION
"Added additional table event action scripting. "
::= { softentIND1TrapMgr 1 }
alcatelIND1TrapMgrMIBNotifications OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For TrapMgr MIB Subsystem Notifications."
::= { alcatelIND1TrapMgrMIB 0 }
alcatelIND1TrapMgrMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Trap Manager Subsystem Managed Objects."
::= { alcatelIND1TrapMgrMIB 1 }
alcatelIND1TrapMgrMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Trap Manager Subsystem Conformance Information."
::= { alcatelIND1TrapMgrMIB 2 }
alcatelIND1TrapMgrMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Trap Manager Subsystem Units Of Conformance."
::= { alcatelIND1TrapMgrMIBConformance 1 }
alcatelIND1TrapMgrMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For SNMP Agent Subsystem Compliance Statements."
::= { alcatelIND1TrapMgrMIBConformance 2 }
--
-- Trap Manager configuration
--
trapMgt OBJECT IDENTIFIER ::= { alcatelIND1TrapMgrMIBObjects 1 }
trapConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The trap configuration table."
::= { trapMgt 1 }
trapConfigEntry OBJECT-TYPE
SYNTAX TrapConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A trap configuration entry."
INDEX { trapIndex }
::= { trapConfigTable 1 }
TrapConfigEntry ::= SEQUENCE {
trapIndex Integer32,
trapName SnmpAdminString,
trapFamily SnmpAdminString,
trapAbsorbPeriod Integer32}
trapIndex OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap identifier."
::= { trapConfigEntry 1 }
trapName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap name."
::= { trapConfigEntry 2 }
trapFamily OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trap family name."
::= { trapConfigEntry 3 }
trapAbsorbPeriod OBJECT-TYPE
SYNTAX Integer32 (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"at maximum, one instance of this trap
is sent out within the period.
value 0 : the trap is not absorbed."
::= { trapConfigEntry 4 }
trapStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of management stations."
::= { trapMgt 2 }
trapStationEntry OBJECT-TYPE
SYNTAX TrapStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management station entry."
INDEX { trapStationIP }
::= { trapStationTable 1 }
TrapStationEntry ::= SEQUENCE {
trapStationIP IpAddress,
trapStationPort Unsigned32,
trapStationRowStatus RowStatus,
trapStationProtocol INTEGER,
trapStationUser SnmpAdminString,
trapStationReplay Unsigned32,
trapStationNextSeq Unsigned32 }
trapStationIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of this management entity."
::= { trapStationEntry 1 }
trapStationPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP port used by this management entity.
This defaults to the SNMP-TRAP port 162."
DEFVAL { 162 }
::= { trapStationEntry 2 }
trapStationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reading or writting values :
- active (1) : traps enabled to the station
- notInService (2) : traps disabled to the station
Only reading values :
- notReady (3) : missing parameters for the station
Only writting values :
- createAndGo (4) : to create an active station
- createAndWait (5) : to create a notInService station
- destroy (6) : to remove a station."
::= { trapStationEntry 3 }
trapStationProtocol OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2 (2),
v3 (3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of protocol used to send the traps
to the station.
The different values are :
v1 : the traps are sent using SNMPv1.
v2 : the traps are sent using SNMPv2.
v3 : the traps are sent using SNMPv3."
DEFVAL { v3 }
::= { trapStationEntry 4 }
trapStationUser OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User name used to send the trap to the station.
This name must correspond to an existing user
account name."
::= { trapStationEntry 5 }
trapStationReplay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The replay value. The switch is required
to send the last known traps for this station
from the replay value."
DEFVAL { 0 }
::= { trapStationEntry 6 }
trapStationNextSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the next trap generated
for this station."
DEFVAL { 0 }
::= { trapStationEntry 7 }
trapFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The trap filtering table for each individual trap."
::= { trapMgt 3 }
trapFilterEntry OBJECT-TYPE
SYNTAX TrapFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A trap filter entry."
INDEX { trapStationIP, trapIndex }
::= { trapFilterTable 1 }
TrapFilterEntry ::= SEQUENCE {
trapFilterStatus INTEGER }
trapFilterStatus OBJECT-TYPE
SYNTAX INTEGER { on(1), off(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the individual filtering :
on : the filter is activated, the traps identified
by trapFilterId can not be sent to the SNMP
manager identified by trapStationIP.
off : no filter is activated."
DEFVAL { off }
::= { trapFilterEntry 1 }
trapAbsorption OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable : the trap absorption service is enabled
disable : the trap absorption service is disabled."
DEFVAL { enable }
::= { trapMgt 4 }
trapToWebView OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable : the traps are forwarded to WebView
disable : the traps are not forwarded to WebView."
DEFVAL { enable }
::= { trapMgt 5 }
alaTrapInetStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaTrapInetStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of management stations."
::= { trapMgt 6 }
alaTrapInetStationEntry OBJECT-TYPE
SYNTAX AlaTrapInetStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management station entry."
INDEX { alaTrapInetStationIPType, alaTrapInetStationIP }
::= { alaTrapInetStationTable 1 }
AlaTrapInetStationEntry ::= SEQUENCE {
alaTrapInetStationIPType InetAddressType,
alaTrapInetStationIP InetAddress,
alaTrapInetStationPort Unsigned32,
alaTrapInetStationRowStatus RowStatus,
alaTrapInetStationProtocol INTEGER,
alaTrapInetStationUser SnmpAdminString,
alaTrapInetStationReplay Unsigned32,
alaTrapInetStationNextSeq Unsigned32 }
alaTrapInetStationIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of alaTrapInetStationIPType indicates the IP
address type for alaTrapInetStationIP."
::= { alaTrapInetStationEntry 1 }
alaTrapInetStationIP OBJECT-TYPE
SYNTAX InetAddress (SIZE (4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this management entity. The address type of
alaTrapInetStationIP is indicated by alaTrapInetStationIPType."
::= { alaTrapInetStationEntry 2 }
alaTrapInetStationPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP port used by this management entity.
This defaults to the SNMP-TRAP port 162."
DEFVAL { 162 }
::= { alaTrapInetStationEntry 3 }
alaTrapInetStationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reading or writting values :
- active (1) : traps enabled to the station
- notInService (2) : traps disabled to the station
Only reading values :
- notReady (3) : missing parameters for the station
Only writting values :
- createAndGo (4) : to create an active station
- createAndWait (5) : to create a notInService station
- destroy (6) : to remove a station."
::= { alaTrapInetStationEntry 4 }
alaTrapInetStationProtocol OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2 (2),
v3 (3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of protocol used to send the traps
to the station.
The different values are :
v1 : the traps are sent using SNMPv1.
v2 : the traps are sent using SNMPv2.
v3 : the traps are sent using SNMPv3."
DEFVAL { v3 }
::= { alaTrapInetStationEntry 5 }
alaTrapInetStationUser OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User name used to send the trap to the station.
This name must correspond to an existing user
account name."
::= { alaTrapInetStationEntry 6 }
alaTrapInetStationReplay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The replay value. The switch is required
to send the last known traps for this station
from the replay value."
DEFVAL { 0 }
::= { alaTrapInetStationEntry 7 }
alaTrapInetStationNextSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the next trap generated
for this station."
DEFVAL { 0 }
::= { alaTrapInetStationEntry 8 }
alaTrapInetFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaTrapInetFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The trap filtering table for each individual trap."
::= { trapMgt 7 }
alaTrapInetFilterEntry OBJECT-TYPE
SYNTAX AlaTrapInetFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A trap filter entry."
INDEX { alaTrapInetStationIPType, alaTrapInetStationIP, trapIndex }
::= { alaTrapInetFilterTable 1 }
AlaTrapInetFilterEntry ::= SEQUENCE {
alaTrapInetFilterStatus INTEGER }
alaTrapInetFilterStatus OBJECT-TYPE
SYNTAX INTEGER { on(1), off(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For the individual filtering :
on : the filter is activated, the traps identified
by trapFilterId can not be sent to the SNMP
manager identified by alaTrapInetStationIP.
off : no filter is activated."
DEFVAL { off }
::= { alaTrapInetFilterEntry 1 }
alaDgTrapStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDgTrapStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Dying Gasp management stations."
::= { trapMgt 8 }
alaDgTrapStationEntry OBJECT-TYPE
SYNTAX AlaDgTrapStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management station entry for Dying Gasp Trap."
INDEX {
alaDgTrapStationIPType,
alaDgTrapStationIP
}
::= { alaDgTrapStationTable 1 }
AlaDgTrapStationEntry ::= SEQUENCE {
alaDgTrapStationIPType InetAddressType,
alaDgTrapStationIP InetAddress,
alaDgTrapStationPort Unsigned32,
alaDgTrapStationProtocol INTEGER,
alaDgTrapStationUser SnmpAdminString,
alaDgTrapStationReplay Unsigned32,
alaDgTrapStationNextSeq Unsigned32
}
alaDgTrapStationIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP network address type."
::= { alaDgTrapStationEntry 1 }
alaDgTrapStationIP OBJECT-TYPE
SYNTAX InetAddress (SIZE (4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of Dying Gasp management entity."
::= { alaDgTrapStationEntry 2 }
alaDgTrapStationPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP port used by this management entity.
This defaults to the SNMP-TRAP port 162."
DEFVAL { 162 }
::= { alaDgTrapStationEntry 3 }
alaDgTrapStationProtocol OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2 (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of protocol used to send the traps
to the station.
The different values are :
v1 : the traps are sent using SNMPv1.
v2 : the traps are sent using SNMPv2.
v3 : the traps are sent using SNMPv3."
DEFVAL { v3 }
::= { alaDgTrapStationEntry 4 }
alaDgTrapStationUser OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User name used to send the trap to the station.
This name must correspond to an existing user
account name."
::= { alaDgTrapStationEntry 5 }
alaDgTrapStationReplay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The replay value. The switch is required
to send the last known traps for this station
from the replay value."
DEFVAL { 0 }
::= { alaDgTrapStationEntry 6 }
alaDgTrapStationNextSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the next trap generated
for this station."
DEFVAL { 0 }
::= { alaDgTrapStationEntry 7 }
--
-- Trap description
--
trapAbsorptionTrap NOTIFICATION-TYPE
OBJECTS
{
trapAbsorStamp,
trapAbsorTrapId,
trapAbsorCounter,
trapAbsorTime
}
STATUS current
DESCRIPTION
"The absorption Trap is sent when a trap has been
absorbed at least once."
::= { alcatelIND1TrapMgrMIBNotifications 1 }
--
-- Objects used in the absorption trap
--
trapNotif OBJECT IDENTIFIER ::= { alcatelIND1TrapMgrMIBObjects 3 }
trapAbsorStamp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The time stamp of the absorbed trap."
::= { trapNotif 1 }
trapAbsorTrapId OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The trap identifier of the absorbed trap."
::= { trapNotif 2 }
trapAbsorCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The number of the iterations of the absorbed trap."
::= { trapNotif 3 }
trapAbsorTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The time stamp of the last iteration."
::= { trapNotif 4 }
--
-- Compliance Statements
--
alcatelIND1TrapMgrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Trap Manager Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
trapMgtGroup,
trapTrapsGroup,
trapNotifGroup
}
::= { alcatelIND1TrapMgrMIBCompliances 1 }
--
-- Units Of Conformance
--
trapMgtGroup OBJECT-GROUP
OBJECTS
{
trapIndex,
trapName,
trapFamily,
trapAbsorbPeriod,
trapStationIP,
trapStationPort,
trapStationRowStatus,
trapStationProtocol,
trapStationUser,
trapStationReplay,
trapStationNextSeq,
trapFilterStatus,
trapAbsorption,
trapToWebView,
alaTrapInetStationPort,
alaTrapInetStationRowStatus,
alaTrapInetStationProtocol,
alaTrapInetStationUser,
alaTrapInetStationReplay,
alaTrapInetStationNextSeq,
alaTrapInetFilterStatus,
alaDgTrapStationPort,
alaDgTrapStationProtocol,
alaDgTrapStationUser,
alaDgTrapStationReplay,
alaDgTrapStationNextSeq
}
STATUS current
DESCRIPTION
"Collection of objects for Trap Management."
::= { alcatelIND1TrapMgrMIBGroups 1 }
trapTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
trapAbsorptionTrap
}
STATUS current
DESCRIPTION
"Collection of notifications for Trap Management."
::= { alcatelIND1TrapMgrMIBGroups 2 }
trapNotifGroup OBJECT-GROUP
OBJECTS
{
trapAbsorStamp,
trapAbsorTrapId,
trapAbsorCounter,
trapAbsorTime
}
STATUS current
DESCRIPTION
"Collection of objects
for Trap Management notifications."
::= { alcatelIND1TrapMgrMIBGroups 3 }
END