mibs/nokia/aos7/ALCATEL-IND1-UDP-RELAY-MIB
ALCATEL-IND1-UDP-RELAY-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress,
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
Integer32, Unsigned32,
NOTIFICATION-TYPE,
Counter32 FROM SNMPv2-SMI
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MacAddress, DisplayString, RowStatus,
TEXTUAL-CONVENTION FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP FROM SNMPv2-CONF
routingIND1UdpRelay FROM ALCATEL-IND1-BASE
InterfaceIndex FROM IF-MIB;
alcatelIND1UDPRelayMIB MODULE-IDENTITY
LAST-UPDATED "201307150000Z"
ORGANIZATION "Alcatel -Architects Of An Internet World "
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
UDP Relay to forward BOOTP/DHCP requests across VLANs
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201307150000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= {routingIND1UdpRelay 1}
alcatelIND1UDPRelayNotificationObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay Notification Objects."
::= { alcatelIND1UDPRelayMIB 0 }
alcatelIND1UDPRelayMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Managed Objects."
::= { alcatelIND1UDPRelayMIB 1 }
alcatelIND1UDPRelayMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Conformance Information."
::= { alcatelIND1UDPRelayMIB 2 }
alcatelIND1UDPRelayMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Units Of Conformance."
::= { alcatelIND1UDPRelayMIBConformance 1 }
alcatelIND1UDPRelayMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For UDP Relay
Subsystem Compliance Statements."
::= { alcatelIND1UDPRelayMIBConformance 2 }
IphelpereOption82ASCIIFieldType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ip helper Option 82 Format ASCII field type"
SYNTAX INTEGER {
none(0),
macAddress(1),
systemName(2),
userString(3),
interfaceAlias(4),
vlan(5),
interface(6)
}
DhcpSnoopingOption82ASCIIFieldType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DHCP Snooping Option 82 Format ASCII field type"
SYNTAX INTEGER {
none(0),
macAddress(1),
systemName(2),
userString(3),
interfaceAlias(4),
vlan(5),
interface(6)
}
DhcpSnoopingOption82CircuitOrRemoteId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Circuit Id or Remote Id for Option 82 Format ASCII field."
SYNTAX INTEGER {
circuitid(1),
remoteid(2)
}
iphelperMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 1 }
genericUdpServiceMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 2 }
alaDhcpClientTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 3 }
dhcpSnoopingMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 4 }
dhcpOption82MIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 5 }
iphelperTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of next hop IP Address for the DHCP Relay Agent."
::= { iphelperMIB 1 }
iphelperEntry OBJECT-TYPE
SYNTAX IphelperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the ip helper table"
INDEX { iphelperVlan, iphelperNextHopIpAddress }
::= { iphelperTable 1 }
IphelperEntry ::= SEQUENCE {
iphelperVlan
Unsigned32,
iphelperNextHopIpAddress
IpAddress,
iphelperResetSrvStats
Unsigned32,
iphelperRowStatus
RowStatus
}
iphelperVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is applicable when iphelperForwardOption is
equal to perVlan (2). On Per VLAN mod the next hop
IP Address corresponds to specific source VLAN. Based on
the VLAN that the DHCP packet comes to the DHCP Relay
Agent the packet is forwarded to the next hop defined
for that VLAN. When iphelperForwardOption is standard (1),
this field will be zero (0)."
::= { iphelperEntry 1 }
iphelperNextHopIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This specifies the next hop IP Address of the
DHCP Relay Agent is to forward the DHCP packet."
::= { iphelperEntry 2 }
iphelperResetSrvStats OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to 1, will reset all the statistic for this
server. On standard mode vlan will be zero. After the
reset operation, system will change this back to a zero (0).
Subsystem will always return zero (0)."
::= { iphelperEntry 3 }
iphelperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { iphelperEntry 4 }
iphelperStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This keeps statistics for each next hop IP Address."
::= { iphelperMIB 2 }
iphelperStatEntry OBJECT-TYPE
SYNTAX IphelperStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the stat table."
INDEX { iphelperStatsVlan, iphelperStatsNextHopIpAddr}
::= { iphelperStatTable 1 }
IphelperStatEntry ::= SEQUENCE {
iphelperStatsVlan
Unsigned32,
iphelperStatsNextHopIpAddr
IpAddress,
iphelperTxToNextHop
Counter32,
iphelperInvalidAgentInfoOptFrmSrver
Counter32
}
iphelperStatsVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is zero (0) when iphelperForwardOption is
equal to standard (1). On Per VLAN mod the next hop
IP Address corresponds to specific source VLAN. Based on
the VLAN that the DHCP packet comes to the DHCP Relay
Agent the packet is forwarded to the next hop defined
for that VLAN. When iphelperForwardOption is standard (1),
this field will be zero (0)."
::= { iphelperStatEntry 1 }
iphelperStatsNextHopIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This specifies the unique server address."
::= { iphelperStatEntry 2 }
iphelperTxToNextHop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This keeps track of the number of packets transmitted to the server."
::= { iphelperStatEntry 3}
iphelperInvalidAgentInfoOptFrmSrver OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to
invalid from DHCP server with Relay Agent Information option
in the DHCP packet."
::= { iphelperStatEntry 4}
iphelperRxFromClient OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets recieved from the client."
::= { iphelperMIB 3 }
iphelperMaxHopsViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to
max hops violation."
::= { iphelperMIB 4}
iphelperForwDelayViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to
forward delay violation."
::= { iphelperMIB 5}
iphelperAgentInfoViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to
DHCP packet with giaddr field not equal to zero and
Relay Agent Information option is present and also the
Relay Agent Information Policy is set to DROP."
::= { iphelperMIB 6}
iphelperInvalidGatewayIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to
giaddr matching a local subnet and Relay Agent Information
option is present in the DHCP packet."
::= { iphelperMIB 7}
iphelperForwDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the BOOTP/DHCP relay's forwarding delay and
is only used by the BOOTP/DHCP service. It is typically
set as seconds, but the value is totally client dependent.
This relay will not forward frames until client frames
have 'secs' field set to atleast the value iphelperForwDelay."
::= { iphelperMIB 8 }
iphelperMaxHops OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the BOOTP/DHCP relay's maximum hops
forwarding limit and is only used by the BOOTP/DHCP service.
If a frame arrives with hopcount greater than or equal
to iphelperMaxHops, it will be dropped."
::= { iphelperMIB 9 }
iphelperForwardOption OBJECT-TYPE
SYNTAX INTEGER
{
standard(1),
perVlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the forwarding option for the BOOTP/DHCP Relay Agent.
Default value is standard (1)."
DEFVAL { standard }
::= { iphelperMIB 10 }
iphelperResetAllStats OBJECT-TYPE
SYNTAX INTEGER {
noOperation (0),
resetAllStats (1),
resetAllGlbStats (2),
resetAllSrvStats (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter resets all the ip helper statistics.
1 - reset all stats. Both Global and server stats.
2 - reset all global statistics.
3 - reset all server statistics.
When the reset operation is done, subsystem will
change the value to zero (0).
Subsystem will always return zero (0)."
::= { iphelperMIB 11}
iphelperBootupOption OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object allows the user to enable or disable the
functionality of the relay to get an IP address at the
time of system boot-up and assign that IP address for
the ip interface of the default VLAN. When this is diabled
and then enable, the object iphelperBootupPacketOption is
reset to its default value.
Default of this option is Disable (2)."
DEFVAL { disable }
::= {iphelperMIB 12}
iphelperBootupPacketOption OBJECT-TYPE
SYNTAX INTEGER
{
bootp(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used in conjunction with iphelperBootupOption.
This specify the packet format with the choices of BOOTP or DHCP
to be used to get an IP address at the time of system boot-up.
Default option is DHCP"
DEFVAL { dhcp }
::= {iphelperMIB 13}
iphelperAgentInformation OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to enable or disable the functionality
of inserting the relay agent information option to the DHCP
option field according to RFC 3046. When is is disbled and then
enabled, the iphelperAgentInformationPolicy will be reset to its
default value."
DEFVAL { disable }
::= {iphelperMIB 14}
iphelperAgentInformationPolicy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to select the policy of either
drop, keep or replace the relay agent information option if
this option is already present in the DHCP packet."
DEFVAL { drop }
::= {iphelperMIB 15}
iphelperPXESupport OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled the relay agent will replace the source IP address
of the packet with the gateway IP address from the DHCP packet.
The default value is disabled."
DEFVAL { disabled }
::= { iphelperMIB 16 }
iphelperDhcpOption82FormatType OBJECT-TYPE
SYNTAX INTEGER {
macAddress(1),
systemName(2),
userString(3),
interfaceAlias(4),
autoInterfaceAlias(5),
ascii(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option-82 defines the type of information carried in circuit id
and remote id sub option fields. If the type selected is string the actual
value of the string can be found in iphelperDhcpOption82StringValue.
Format type ASCII will insert the configured fields in ASCII format."
DEFVAL { macAddress }
::= { iphelperMIB 17 }
iphelperDhcpOption82StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the string that will be used in the circuit id and remote id
sub options."
::= { iphelperMIB 18 }
iphelperDhcpOption82FormatASCIIField1 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the first field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 19 }
iphelperDhcpOption82FormatASCIIField1StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the first field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII.
If the option 82 format type is not ASCII or if this field is not used or
if the string value is port specific, this field returns an ASCII string -."
::= { iphelperMIB 20 }
iphelperDhcpOption82FormatASCIIField2 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the second field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 21 }
iphelperDhcpOption82FormatASCIIField2StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the second field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII.
If the option 82 format type is not ASCII or if this field is not used or
if the string value is port specific, this field returns an ASCII string -."
::= { iphelperMIB 22 }
iphelperDhcpOption82FormatASCIIField3 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the third field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 23 }
iphelperDhcpOption82FormatASCIIField3StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the third field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII.
If the option 82 format type is not ASCII or if this field is not used or
if the string value is port specific, this field returns an ASCII string -."
::= { iphelperMIB 24 }
iphelperDhcpOption82FormatASCIIField4 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the fourth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 25 }
iphelperDhcpOption82FormatASCIIField4StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the fourth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII.
If the option 82 format type is not ASCII or if this field is not used or
if the string value is port specific, this field returns an ASCII string -."
::= { iphelperMIB 26 }
iphelperDhcpOption82FormatASCIIField5 OBJECT-TYPE
SYNTAX IphelpereOption82ASCIIFieldType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the fifth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII"
DEFVAL { none }
::= { iphelperMIB 27 }
iphelperDhcpOption82FormatASCIIField5StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string value of the fifth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII.
If the option 82 format type is not ASCII or if this field is not used or
if the string value is port specific, this field returns an ASCII string -."
::= { iphelperMIB 28 }
iphelperDhcpOption82FormatASCIIDelimiter OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the delimiter that is inserted between the fields in the
Option 82 string in ASCII format, which will be copied to Option-82
circuit id of the DHCP packet. This value is applicable only, if the
option 82 format type is ASCII"
::= { iphelperMIB 29 }
iphelperResetAllOpt82ErrStats OBJECT-TYPE
SYNTAX INTEGER {
noOperation (0),
resetAllStats (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter resets all the ip helper Option 82 error statistics.
When the reset operation is done, subsystem will
change the value to zero (0).
Subsystem will always return zero (0)."
::= { iphelperMIB 30}
iphelperOption82ErrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IphelperOption82ErrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Option 82 related error statistic count per port and per vlan."
::= { iphelperMIB 31 }
iphelperOption82ErrStatsEntry OBJECT-TYPE
SYNTAX IphelperOption82ErrStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the ip helper Option 82 error statistics table"
INDEX { iphelperOpt82ifIndex, iphelperOpt82vlan }
::= { iphelperOption82ErrStatsTable 1 }
IphelperOption82ErrStatsEntry ::= SEQUENCE {
iphelperOpt82ifIndex
InterfaceIndex,
iphelperOpt82vlan
Unsigned32,
iphelperOpt82agentInfoViolationCnt
Counter32,
iphelperOpt82invalidGatewayIPAddrCnt
Counter32,
iphelperOpt82resetErrStats
INTEGER
}
iphelperOpt82ifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface where the DHCP packet ingress the switch that
caused the Agent Info Violation or the Invalid Gateway
IP Address error."
::= { iphelperOption82ErrStatsEntry 1 }
iphelperOpt82vlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan where the DHCP packet ingress the switch that
caused the Agent Info Violation or the Invalid Gateway
IP Address error."
::= { iphelperOption82ErrStatsEntry 2 }
iphelperOpt82agentInfoViolationCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Agent Info Violation seen on this interface and vlan."
::= { iphelperOption82ErrStatsEntry 3 }
iphelperOpt82invalidGatewayIPAddrCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Invalid Gateway IP Address seen on this interface and vlan."
::= { iphelperOption82ErrStatsEntry 4 }
iphelperOpt82resetErrStats OBJECT-TYPE
SYNTAX INTEGER {
noOperation (0),
resetErrStats (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter resets the ip helper Option 82 error statistics
on this interface and vlan. When the reset operation is done,
subsystem will change the value to zero (0). Subsystem will always return
zero (0)."
::= { iphelperOption82ErrStatsEntry 5 }
dhcpSnoopingVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vlans that have DHCP Snooping enabled."
::= { dhcpSnoopingMIB 1 }
dhcpSnoopingVlanEntry OBJECT-TYPE
SYNTAX DhcpSnoopingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snooping VLAN entry."
INDEX { dhcpSnoopingVlanNumber }
::= { dhcpSnoopingVlanTable 1 }
DhcpSnoopingVlanEntry ::= SEQUENCE {
dhcpSnoopingVlanNumber Integer32,
dhcpSnoopingVlanOpt82DataInsertionStatus INTEGER,
dhcpSnoopingVlanMacAddrVerificationStatus INTEGER,
dhcpSnoopingVlanStatus RowStatus
}
dhcpSnoopingVlanNumber OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number identifying this instance. Valid
range from 1 to 4094."
::= { dhcpSnoopingVlanEntry 1 }
dhcpSnoopingVlanOpt82DataInsertionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Option-82 data insertion status. Default value is enabled,
which means once the VLAN is enabled for DHCP snooping, the
Option-82 field will be inserted in the DHCP packets between the
Relay Agent and the DHCP Server, on all the ports belong to the
VLAN."
DEFVAL { enabled }
::= { dhcpSnoopingVlanEntry 2 }
dhcpSnoopingVlanMacAddrVerificationStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Snooping MAC Address verification status. Default value is
enabled. Once enabled, for all the incoming DHCP traffic to those
DHCP Snooping enabled vlan port, it compares the source MAC address
and the client Hardware Address in the DHCP packet. If mismatch, the
packet will be dropped."
DEFVAL { enabled }
::= { dhcpSnoopingVlanEntry 3 }
dhcpSnoopingVlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { dhcpSnoopingVlanEntry 4 }
dhcpSnoopingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ports that have DHCP Snooping trust status."
::= { dhcpSnoopingMIB 2 }
dhcpSnoopingPortEntry OBJECT-TYPE
SYNTAX DhcpSnoopingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snooping Port entry."
INDEX { dhcpSnoopingPortIfIndex }
::= { dhcpSnoopingPortTable 1 }
DhcpSnoopingPortEntry ::= SEQUENCE {
dhcpSnoopingPortIfIndex InterfaceIndex,
dhcpSnoopingPortTrustMode INTEGER,
dhcpSnoopingPortMacAddrViolation Counter32,
dhcpSnoopingPortDhcpServerViolation Counter32,
dhcpSnoopingPortOption82Violation Counter32,
dhcpSnoopingPortRelayAgentViolation Counter32,
dhcpSnoopingPortBindingViolation Counter32,
dhcpSnoopingPortIpSourceFiltering INTEGER
}
dhcpSnoopingPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex subindex identifying this instance."
::= { dhcpSnoopingPortEntry 1 }
dhcpSnoopingPortTrustMode OBJECT-TYPE
SYNTAX INTEGER {
blocked(1),
clientOnly(2),
trusted(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping's VLAN port's trust mode. Default value
is client-only, which means once the VLAN is enabled for DHCP
snooping, the vlan ports only allow DHCP client packets. Blocked
means all DHCP traffic is block on the port. Trusted means all
DHCP traffic is allowed on the port"
DEFVAL { clientOnly }
::= { dhcpSnoopingPortEntry 2 }
dhcpSnoopingPortMacAddrViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to DHCPi
packet with the source MAC Address not equal the client DHCP
Hardware address in the DHCP packet."
::= { dhcpSnoopingPortEntry 3 }
dhcpSnoopingPortDhcpServerViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to receiving
an DHCP server packet on a DHCP Snooping enabled port."
::= { dhcpSnoopingPortEntry 4 }
dhcpSnoopingPortOption82Violation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to a relay
agent forards a packet that includes option 82 info to an untrusted
port."
::= { dhcpSnoopingPortEntry 5 }
dhcpSnoopingPortRelayAgentViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to an DHCP
relay agent forwards a DHCP packate includes an relay agent ip
address that is not 0.0.0.0."
::= { dhcpSnoopingPortEntry 6 }
dhcpSnoopingPortBindingViolation OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets dropped due to receiving
an DHCP Relase or DHCP Decline message that contains a MAC address
in the DHCP snooping binding table, but the interface information in
the binding table does not match the interface on which the message
was received."
::= { dhcpSnoopingPortEntry 7 }
dhcpSnoopingPortIpSourceFiltering OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP Snooping IP Source filtering status. Default value
is disabled. Once enabled, only the incoming traffic with the proper
client IP address, MAC address and port will be allowed."
DEFVAL { disabled }
::= { dhcpSnoopingPortEntry 8 }
dhcpSnoopingBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopingBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping binding table."
::= { dhcpSnoopingMIB 3 }
dhcpSnoopingBindingEntry OBJECT-TYPE
SYNTAX DhcpSnoopingBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCP Snooping binding entry."
INDEX { dhcpSnoopingBindingMacAddress, dhcpSnoopingBindingIfIndex }
::= { dhcpSnoopingBindingTable 1 }
DhcpSnoopingBindingEntry ::= SEQUENCE {
dhcpSnoopingBindingMacAddress MacAddress,
dhcpSnoopingBindingIfIndex InterfaceIndex,
dhcpSnoopingBindingIpAddress IpAddress,
dhcpSnoopingBindingVlan Unsigned32,
dhcpSnoopingBindingLeaseTime Unsigned32,
dhcpSnoopingBindingType INTEGER,
dhcpSnoopingBindingRowStatus RowStatus
}
dhcpSnoopingBindingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC Address subindex identifying this instance."
::= { dhcpSnoopingBindingEntry 1 }
dhcpSnoopingBindingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IfIndex subindex identifying this instance. It is the
the interface where the DHCP request is coming in from."
::= { dhcpSnoopingBindingEntry 2 }
dhcpSnoopingBindingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Ip Address offered by the DHCP Server to the Client."
::= { dhcpSnoopingBindingEntry 3 }
dhcpSnoopingBindingVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the VLAN Id where the DHCP client belongs to."
::= { dhcpSnoopingBindingEntry 4 }
dhcpSnoopingBindingLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lease time of the client's IP Address."
::= { dhcpSnoopingBindingEntry 5 }
dhcpSnoopingBindingType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1),
static(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The learning/configuration nature of the binding entry.
Normally, the entries are learned dynamically, while it
also can be statically/manually configured."
DEFVAL { dynamic }
::= { dhcpSnoopingBindingEntry 6 }
dhcpSnoopingBindingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { dhcpSnoopingBindingEntry 7 }
dhcpSnoopingMode OBJECT-TYPE
SYNTAX INTEGER {
switchLevel(1),
disabled(2),
vlanLevel(3) -- read-only state
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling DHCP Snooping at the switch level. For the vlan level,
it is enabled implicitly when an individual vlan's DHCP Snooping
is enabled; and, mode is implicitly disabled until all vlan's
DHCP Snooping are disabled. If mode is set to vlan level, the
operation will be of no effect."
::= {dhcpSnoopingMIB 4 }
dhcpSnoopingOpt82DataInsertionStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Option-82 data insertion status at switch level. Default
value is enabled, the Option-82 field will be inserted in the DHCP
packets between the Relay Agent and the DHCP Server, on all the
ports belong to the switch."
DEFVAL { enabled }
::= { dhcpSnoopingMIB 5 }
dhcpSnoopingMacAddrVerificationStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Snooping MAC Address verification status at switch level.
Default value is enabled. Once enabled, for all the incoming DHCP
traffic to the port, it compares the source MAC address and the
client Hardware Address in the DHCP packet. If mismatch, the packet
will be dropped."
DEFVAL { enabled }
::= { dhcpSnoopingMIB 6 }
dhcpSnoopingBindingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if the capability of building the DHCP
Snooping Binding Table/Database is enable or not. By default, it is
enabled. It is applicable for both switch-level or vlan-level DHCP
Snooping."
DEFVAL { enabled }
::= { dhcpSnoopingMIB 7 }
dhcpSnoopingBindingDatabaseSyncTimeout OBJECT-TYPE
SYNTAX Unsigned32 (60..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Snooping Binding Database synchronization timeout value.
It is used to specify the synchronization frequency, in seconds,
between the binding table in memory and the binding file in flash."
DEFVAL { 300 }
::= { dhcpSnoopingMIB 8 }
dhcpSnoopingBindingDatabaseLastSyncTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last successuful DHCP Snooping Binding
Database synchronization."
::= { dhcpSnoopingMIB 9 }
dhcpSnoopingBindingDatabaseAction OBJECT-TYPE
SYNTAX INTEGER {
noaction(0),
purge(1),
renew(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the action to be performed. Purge:
means to clear the binding table entries in the memory.
Renew: means to populate the binding table entries from the
flash file."
::= { dhcpSnoopingMIB 10 }
dhcpSnoopingBypassOpt82CheckStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP bypass option-82 check status. By default, it is disabled.
Once enabled, it will no longer enforce the check of option-82 field
in the incoming DHCP Packets on those untrusted ports."
DEFVAL { disabled }
::= { dhcpSnoopingMIB 11 }
dhcpSnoopingBindingPersistencyStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP Snooping binding table persistency check status. By default,
it is disabled. Once enabled, the binding entries expiry will be
solely depend on Lease time"
DEFVAL { disabled }
::= { dhcpSnoopingMIB 12 }
dhcpSnoopingSourceFilterVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopingSourceFilterVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vlans that have ip-source-filtering enabled."
::= { dhcpSnoopingMIB 13 }
dhcpSnoopingSourceFilterVlanEntry OBJECT-TYPE
SYNTAX DhcpSnoopingSourceFilterVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Source Filtering enabled VLAN entry."
INDEX { dhcpSnoopingSourceFilterVlanNumber }
::= { dhcpSnoopingSourceFilterVlanTable 1 }
DhcpSnoopingSourceFilterVlanEntry ::= SEQUENCE {
dhcpSnoopingSourceFilterVlanNumber
Integer32,
dhcpSnoopingSourceFilterVlanFilteringStatus
RowStatus
}
dhcpSnoopingSourceFilterVlanNumber OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number identifying this instance. Valid
range from 1 to 4094."
::= { dhcpSnoopingSourceFilterVlanEntry 1 }
dhcpSnoopingSourceFilterVlanFilteringStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Snooping IP Source filtering row status. Default value
is disabled. Once enabled, only the incoming traffic with the proper
client IP address, MAC address , port and vlan will be allowed."
::= { dhcpSnoopingSourceFilterVlanEntry 2 }
dhcpSnoopingOption82FormatType OBJECT-TYPE
SYNTAX INTEGER {
macAddress(1),
systemName(2),
userString(3),
interfaceAlias(4),
autoInterfaceAlias(5),
ascii(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP option-82 defines the type of information carried in circuit id
and remote id sub option fields. If the type selected is string the actual
value of the string can be found in iphelperDhcpOption82StringValue.
Format type ASCII will insert the configured fields in ASCII format."
DEFVAL { macAddress }
::= { iphelperMIB 45 }
dhcpSnoopingOption82StringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the string that will be used in the circuit id and remote id
sub options."
::= { iphelperMIB 46 }
dhcpSnoopingOption82FormatASCIIConfigurableTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopingOption82FormatASCIIConfigurableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ascii fields used for Circuit ID or Remote ID."
::= { iphelperMIB 47 }
dhcpSnoopingOption82FormatASCIIConfigurableEntry OBJECT-TYPE
SYNTAX DhcpSnoopingOption82FormatASCIIConfigurableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An ascii field entry for Circuit ID or Remote ID."
INDEX { dhcpSnoopingOption82FormatASCIIConfigurableIndex }
::= { dhcpSnoopingOption82FormatASCIIConfigurableTable 1 }
DhcpSnoopingOption82FormatASCIIConfigurableEntry ::= SEQUENCE {
dhcpSnoopingOption82FormatASCIIConfigurableIndex
DhcpSnoopingOption82CircuitOrRemoteId,
dhcpSnoopingOption82FormatASCIIConfigurableField1
DhcpSnoopingOption82ASCIIFieldType,
dhcpSnoopingOption82FormatASCIIConfigurableField1StrVal
SnmpAdminString,
dhcpSnoopingOption82FormatASCIIConfigurableField2
DhcpSnoopingOption82ASCIIFieldType,
dhcpSnoopingOption82FormatASCIIConfigurableField2StrVal
SnmpAdminString,
dhcpSnoopingOption82FormatASCIIConfigurableField3
DhcpSnoopingOption82ASCIIFieldType,
dhcpSnoopingOption82FormatASCIIConfigurableField3StrVal
SnmpAdminString,
dhcpSnoopingOption82FormatASCIIConfigurableField4
DhcpSnoopingOption82ASCIIFieldType,
dhcpSnoopingOption82FormatASCIIConfigurableField4StrVal
SnmpAdminString,
dhcpSnoopingOption82FormatASCIIConfigurableField5
DhcpSnoopingOption82ASCIIFieldType,
dhcpSnoopingOption82FormatASCIIConfigurableField5StrVal
SnmpAdminString,
dhcpSnoopingOption82FormatASCIIConfigurableDelimiter
SnmpAdminString,
dhcpSnoopingOption82FormatASCIIConfigurableStatus
RowStatus
}
dhcpSnoopingOption82FormatASCIIConfigurableIndex OBJECT-TYPE
SYNTAX DhcpSnoopingOption82CircuitOrRemoteId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the either circuit id or remote id for option82."
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 1 }
dhcpSnoopingOption82FormatASCIIConfigurableField1 OBJECT-TYPE
SYNTAX DhcpSnoopingOption82ASCIIFieldType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the first field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII."
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 2 }
dhcpSnoopingOption82FormatASCIIConfigurableField1StrVal OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value of the first field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is ASCII"
DEFVAL { " - " }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 3 }
dhcpSnoopingOption82FormatASCIIConfigurableField2 OBJECT-TYPE
SYNTAX DhcpSnoopingOption82ASCIIFieldType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the second field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII"
DEFVAL { none }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 4 }
dhcpSnoopingOption82FormatASCIIConfigurableField2StrVal OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value of the second field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is ASCII"
DEFVAL { " - " }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 5 }
dhcpSnoopingOption82FormatASCIIConfigurableField3 OBJECT-TYPE
SYNTAX DhcpSnoopingOption82ASCIIFieldType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the third field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII"
DEFVAL { none }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 6 }
dhcpSnoopingOption82FormatASCIIConfigurableField3StrVal OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value of the third field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is ASCII"
DEFVAL { " - " }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 7 }
dhcpSnoopingOption82FormatASCIIConfigurableField4 OBJECT-TYPE
SYNTAX DhcpSnoopingOption82ASCIIFieldType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the fourth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII"
DEFVAL { none }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 8 }
dhcpSnoopingOption82FormatASCIIConfigurableField4StrVal OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value of the fourth field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is ASCII"
DEFVAL { " - " }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 9 }
dhcpSnoopingOption82FormatASCIIConfigurableField5 OBJECT-TYPE
SYNTAX DhcpSnoopingOption82ASCIIFieldType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the fifth field in the Option 82 string in ASCII
format, which will be copied to Option-82 circuit id or remote id of
the DHCP packet. This Field is applicable only, if the option 82
format type is ASCII"
DEFVAL { none }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 10 }
dhcpSnoopingOption82FormatASCIIConfigurableField5StrVal OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value of the fifth field in the Option 82 string in
ASCII format, which will be copied to Option-82 circuit id or remote
id of the DHCP packet. This Field is applicable only, if the option
82 format type is ASCII"
DEFVAL { " - " }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 11 }
dhcpSnoopingOption82FormatASCIIConfigurableDelimiter OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the delimiter that is inserted between the fields in
the Option 82 string in ASCII format, which will be copied to
Option-82 circuit id or remote id of the DHCP packet. This value is
applicable only, if the option 82 format type is ASCII"
DEFVAL { "" }
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 12 }
dhcpSnoopingOption82FormatASCIIConfigurableStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of the entry."
::= { dhcpSnoopingOption82FormatASCIIConfigurableEntry 13 }
-- MDNS Relay --
alaMdnsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MDNS global admin status."
DEFVAL { disable }
::= { iphelperMIB 48 }
alaMdnsGreTunnelName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the tunnel name for the MDNS feature."
::= { iphelperMIB 49 }
alaMdnsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MDNS operational status"
DEFVAL { down }
::= { iphelperMIB 50 }
-- SSDP Relay --
alaSsdpGreTunnelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the GRE tunnel IP interface name associated with the SSDP Relay feature."
::= { iphelperMIB 51 }
alaSsdpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSDP Relay global status"
DEFVAL { disabled }
::= { iphelperMIB 52 }
alaSsdpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSDP operational status"
DEFVAL { down }
::= { iphelperMIB 53 }
genericUdpServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenericUdpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the Generic UDP Relay Service."
::= { genericUdpServiceMIB 1 }
genericUdpServiceEntry OBJECT-TYPE
SYNTAX GenericUdpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in Generic UDP Relay table"
INDEX { genericUdpServiceUdpPort}
::= { genericUdpServiceTable 1 }
GenericUdpServiceEntry ::= SEQUENCE {
genericUdpServiceUdpPort
Unsigned32,
genericUdpServiceDescription
SnmpAdminString,
genericUdpServiceStatRxFromClient
Counter32,
genericUdpServiceRowStatus
RowStatus
}
genericUdpServiceUdpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"UDP port for the service."
::= { genericUdpServiceEntry 1 }
genericUdpServiceDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..30))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name and/or description of the service. If null string is passed
the default name will be used."
::= { genericUdpServiceEntry 2 }
genericUdpServiceStatRxFromClient OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets received from the
client with UDP destination port matching genericUdpServiceUdpPort."
::= { genericUdpServiceEntry 3 }
genericUdpServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting"
::= { genericUdpServiceEntry 4 }
genericUdpServiceDstTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenericUdpServiceDstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the destination VLAN for the
Generic UDP Relay Service. UDP packet with destination port
genericUdpServiceUdpPort are forwarded to VLAN defined in
genericUdpServiceDstVlan."
::= { genericUdpServiceMIB 2 }
genericUdpServiceDstEntry OBJECT-TYPE
SYNTAX GenericUdpServiceDstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in Generic UDP Relay table"
INDEX { genericUdpServicePort, genericUdpServiceDstVlan}
::= { genericUdpServiceDstTable 1 }
GenericUdpServiceDstEntry ::= SEQUENCE {
genericUdpServicePort
Unsigned32,
genericUdpServiceDstVlan
Unsigned32,
genericUdpServiceStatTxToVlan
Counter32,
genericUdpServiceDstTblRowStatus
RowStatus
}
genericUdpServicePort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"UDP port for the service."
::= { genericUdpServiceDstEntry 1 }
genericUdpServiceDstVlan OBJECT-TYPE
SYNTAX Unsigned32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination VLAN that the UPD port is to be forwarded to."
::= { genericUdpServiceDstEntry 2 }
genericUdpServiceStatTxToVlan OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets transmitted to the
destination VLAN with UDP destination port matching
genericUdpServicePort."
::= { genericUdpServiceDstEntry 3}
genericUdpServiceDstTblRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting the Generic Service Destination Table"
::= { genericUdpServiceDstEntry 4 }
genericUdpServiceStatReset OBJECT-TYPE
SYNTAX INTEGER {
noOperation (0),
resetAllStats (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter resets all the Generic UDP Relay related
statistics. Subsystem always returns zero (0)."
::= { genericUdpServiceMIB 3 }
alaGenericUdpServiceDstIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenericUdpServiceDstIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the destination IP for the
Generic UDP Relay Service. UDP packet with destination port
alaGenericUdpServiceDstUdpPort are forwarded to IP defined in
alaGenericUdpServiceDstIpAddress."
::= { genericUdpServiceMIB 4 }
alaGenericUdpServiceDstIpEntry OBJECT-TYPE
SYNTAX GenericUdpServiceDstIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in Generic UDP Relay destination Ip table."
INDEX {
alaGenericUdpServiceDstUdpPort,
alaGenericUdpServiceDstIpType,
alaGenericUdpServiceDstIpAddress
}
::= { alaGenericUdpServiceDstIpTable 1 }
GenericUdpServiceDstIpEntry ::= SEQUENCE {
alaGenericUdpServiceDstUdpPort
Unsigned32,
alaGenericUdpServiceDstIpType
InetAddressType,
alaGenericUdpServiceDstIpAddress
InetAddress,
alaGenericUdpServiceDstStatTxToIp
Counter32,
alaGenericUdpServiceDstIpRowStatus
RowStatus
}
alaGenericUdpServiceDstUdpPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"UDP port for the service."
::= { alaGenericUdpServiceDstIpEntry 1 }
alaGenericUdpServiceDstIpType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This specifies the IP Address type of the
UDP Relay Server to forward the UDP packet."
::= { alaGenericUdpServiceDstIpEntry 2 }
alaGenericUdpServiceDstIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This specifies the IP Address of the
UDP Relay Server to forward the UDP packet."
::= { alaGenericUdpServiceDstIpEntry 3 }
alaGenericUdpServiceDstStatTxToIp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This keeps track of the number of packets transmitted to the
destination IP with UDP destination port matching
alaGenericUdpServiceDstUdpPort."
::= { alaGenericUdpServiceDstIpEntry 4}
alaGenericUdpServiceDstIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting the Generic Service Destination IP Table"
::= { alaGenericUdpServiceDstIpEntry 5 }
-- --------------------------------------------------------------
-- Trap Description
-- --------------------------------------------------------------
-- Notifications
alaDhcpClientAddressAddTrap NOTIFICATION-TYPE
OBJECTS {
alaDhcpClientAddress
}
STATUS current
DESCRIPTION
"When new IP address is assigned to DHCP Client interface."
::= { alcatelIND1UDPRelayNotificationObjects 1 }
alaDhcpClientAddressExpiryTrap NOTIFICATION-TYPE
OBJECTS {
alaDhcpClientAddress
}
STATUS current
DESCRIPTION
"When the lease time expires or when DHCP client not
able to renew/rebind an IP address."
::= { alcatelIND1UDPRelayNotificationObjects 2 }
alaDhcpClientAddressModifyTrap NOTIFICATION-TYPE
OBJECTS {
alaDhcpClientAddress,
alaDhcpClientNewAddress
}
STATUS current
DESCRIPTION
"When the dhcp client not able to obtain the existing
IP address and new IP address is assigned to the DHCP client."
::= { alcatelIND1UDPRelayNotificationObjects 3 }
alaDhcpBindingDuplicateEntry NOTIFICATION-TYPE
OBJECTS {
dhcpSnoopingBindingMacAddress,
dhcpSnoopingBindingVlan,
dhcpSnoopingBindingIfIndex,
dhcpSnoopingBindingIfIndex
}
STATUS current
DESCRIPTION
"Trap to notify MAC Movement in DHCP-Binding Table
Mac Address, Vlan, Previous ifIndex, Current ifIndex"
::= { alcatelIND1UDPRelayNotificationObjects 4 }
-- Notification Objects
alaDhcpClientAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the current IP address of the DHCP client."
::= { alaDhcpClientTrapsObj 1 }
alaDhcpClientNewAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the new IP address assigned for the DHCP client."
::= { alaDhcpClientTrapsObj 2 }
--
-- COMPLIANCE
--
alcatelIND1UDPRelayMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for UDP Relay"
MODULE
MANDATORY-GROUPS
{
iphelperGroup,
iphelperStatGroup,
iphelperMiscGroup,
genericUdpServiceGroup,
genericUdpServiceDstGroup,
genericUdpServiceMiscGroup,
alaDhcpClientTrapsGroup,
dhcpSnoopingGroup,
dhcpSnoopingGroup2,
alaGenericUdpServiceDstIpGroup
}
::={ alcatelIND1UDPRelayMIBCompliances 1}
iphelperGroup OBJECT-GROUP
OBJECTS
{
iphelperResetSrvStats,
iphelperRowStatus
}
STATUS current
DESCRIPTION
" Collection of objects for the management of parameters of UDP Relay."
::= { alcatelIND1UDPRelayMIBGroups 1}
iphelperStatGroup OBJECT-GROUP
OBJECTS
{
iphelperTxToNextHop,
iphelperInvalidAgentInfoOptFrmSrver
}
STATUS current
DESCRIPTION
" Collection of objects for management of statistics for DHCP Relay Agent."
::= { alcatelIND1UDPRelayMIBGroups 2}
iphelperMiscGroup OBJECT-GROUP
OBJECTS
{
iphelperRxFromClient,
iphelperMaxHopsViolation,
iphelperForwDelayViolation,
iphelperAgentInfoViolation,
iphelperInvalidGatewayIP,
iphelperForwDelay,
iphelperMaxHops,
iphelperForwardOption,
iphelperResetAllStats,
iphelperBootupOption,
iphelperBootupPacketOption,
iphelperAgentInformation,
iphelperAgentInformationPolicy,
iphelperPXESupport,
iphelperDhcpOption82FormatType,
iphelperDhcpOption82StringValue,
iphelperDhcpOption82FormatASCIIField1,
iphelperDhcpOption82FormatASCIIField1StringValue,
iphelperDhcpOption82FormatASCIIField2,
iphelperDhcpOption82FormatASCIIField2StringValue,
iphelperDhcpOption82FormatASCIIField3,
iphelperDhcpOption82FormatASCIIField3StringValue,
iphelperDhcpOption82FormatASCIIField4,
iphelperDhcpOption82FormatASCIIField4StringValue,
iphelperDhcpOption82FormatASCIIField5 ,
iphelperDhcpOption82FormatASCIIField5StringValue,
iphelperDhcpOption82FormatASCIIDelimiter,
iphelperResetAllOpt82ErrStats,
alaMdnsAdminStatus,
alaMdnsGreTunnelName,
alaMdnsOperStatus,
alaSsdpGreTunnelName,
alaSsdpAdminStatus,
alaSsdpOperStatus
}
STATUS current
DESCRIPTION
" Other independent objects of UDP Relay."
::= { alcatelIND1UDPRelayMIBGroups 3}
genericUdpServiceGroup OBJECT-GROUP
OBJECTS
{
genericUdpServiceDescription,
genericUdpServiceStatRxFromClient,
genericUdpServiceRowStatus
}
STATUS current
DESCRIPTION
"Objects for Generic UDP Service table"
::= { alcatelIND1UDPRelayMIBGroups 4}
genericUdpServiceDstGroup OBJECT-GROUP
OBJECTS
{
genericUdpServiceStatTxToVlan,
genericUdpServiceDstTblRowStatus
}
STATUS current
DESCRIPTION
"Objects for Generic UDP Service Destination table"
::= { alcatelIND1UDPRelayMIBGroups 5}
genericUdpServiceMiscGroup OBJECT-GROUP
OBJECTS
{
genericUdpServiceStatReset
}
STATUS current
DESCRIPTION
"Objects for Generic UDP Service Misc Group."
::= { alcatelIND1UDPRelayMIBGroups 6}
alaDhcpClientTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
alaDhcpClientAddressAddTrap,
alaDhcpClientAddressExpiryTrap,
alaDhcpClientAddressModifyTrap,
alaDhcpBindingDuplicateEntry
}
STATUS current
DESCRIPTION
"Collection of traps for management of DHCP Client "
::= { alcatelIND1UDPRelayMIBGroups 7}
alaDhcpClientTrapsObjectGroup OBJECT-GROUP
OBJECTS
{
alaDhcpClientAddress,
alaDhcpClientNewAddress
}
STATUS current
DESCRIPTION
"Collection of trap objects for management of DHCP Client "
::= { alcatelIND1UDPRelayMIBGroups 8}
iphelperOpt82ErrorStatGroup OBJECT-GROUP
OBJECTS
{
iphelperOpt82agentInfoViolationCnt,
iphelperOpt82invalidGatewayIPAddrCnt,
iphelperOpt82resetErrStats
}
STATUS current
DESCRIPTION
" Collection of objects for Option 82 error statistics."
::= { alcatelIND1UDPRelayMIBGroups 9}
dhcpSnoopingGroup OBJECT-GROUP
OBJECTS
{
dhcpSnoopingBindingDatabaseAction,
dhcpSnoopingBindingDatabaseLastSyncTime,
dhcpSnoopingBindingDatabaseSyncTimeout,
dhcpSnoopingBindingIfIndex,
dhcpSnoopingBindingIpAddress,
dhcpSnoopingBindingLeaseTime,
dhcpSnoopingBindingMacAddress,
dhcpSnoopingBindingPersistencyStatus,
dhcpSnoopingBindingRowStatus,
dhcpSnoopingBindingStatus,
dhcpSnoopingBindingType,
dhcpSnoopingBindingVlan,
dhcpSnoopingBypassOpt82CheckStatus,
dhcpSnoopingMacAddrVerificationStatus,
dhcpSnoopingMode,
dhcpSnoopingOpt82DataInsertionStatus,
dhcpSnoopingOption82FormatASCIIConfigurableDelimiter,
dhcpSnoopingOption82FormatASCIIConfigurableField1,
dhcpSnoopingOption82FormatASCIIConfigurableField1StrVal,
dhcpSnoopingOption82FormatASCIIConfigurableField2,
dhcpSnoopingOption82FormatASCIIConfigurableField2StrVal,
dhcpSnoopingOption82FormatASCIIConfigurableField3,
dhcpSnoopingOption82FormatASCIIConfigurableField3StrVal,
dhcpSnoopingOption82FormatASCIIConfigurableField4,
dhcpSnoopingOption82FormatASCIIConfigurableField4StrVal,
dhcpSnoopingOption82FormatASCIIConfigurableField5,
dhcpSnoopingOption82FormatASCIIConfigurableField5StrVal,
dhcpSnoopingOption82FormatASCIIConfigurableStatus,
dhcpSnoopingOption82FormatType,
dhcpSnoopingPortIpSourceFiltering,
dhcpSnoopingPortMacAddrViolation,
dhcpSnoopingOption82StringValue
}
STATUS current
DESCRIPTION
" Collection of objects for DHCP Snooping."
::= { alcatelIND1UDPRelayMIBGroups 10}
dhcpSnoopingGroup2 OBJECT-GROUP
OBJECTS
{
dhcpSnoopingPortBindingViolation,
dhcpSnoopingPortOption82Violation,
dhcpSnoopingPortRelayAgentViolation,
dhcpSnoopingPortTrustMode,
dhcpSnoopingSourceFilterVlanFilteringStatus,
dhcpSnoopingVlanMacAddrVerificationStatus,
dhcpSnoopingPortDhcpServerViolation,
dhcpSnoopingVlanOpt82DataInsertionStatus,
dhcpSnoopingVlanStatus
}
STATUS current
DESCRIPTION
" Collection of objects for DHCP Snooping."
::= { alcatelIND1UDPRelayMIBGroups 11}
alaGenericUdpServiceDstIpGroup OBJECT-GROUP
OBJECTS
{
alaGenericUdpServiceDstStatTxToIp,
alaGenericUdpServiceDstIpRowStatus
}
STATUS current
DESCRIPTION
"Objects for Generic UDP Service Destination IP table"
::= { alcatelIND1UDPRelayMIBGroups 12}
END