mibs/nokia/aos7/ALCATEL-IND1-VIRTUALROUTER-MIB
ALCATEL-IND1-VIRTUALROUTER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32
FROM SNMPv2-SMI
RowStatus, TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
routingIND1Vrf
FROM ALCATEL-IND1-BASE ;
alcatelIND1VirtualRouterMIB MODULE-IDENTITY
LAST-UPDATED "201308230000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of Virtual Router instances.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200803170000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Vrf 1 }
alcatelIND1VirtualRouterMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1VirtualRouterMIB 1 }
alaVirtualRouterConfig OBJECT IDENTIFIER ::= { alcatelIND1VirtualRouterMIBObjects 1 }
-- virtual router name table
alaVirtualRouterNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVirtualRouterNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Virtual Router Name to Virtual Router Index bindings.
There is always an entry for the default Virtual Router which has the
name default"
::= { alaVirtualRouterConfig 1 }
alaVirtualRouterNameEntry OBJECT-TYPE
SYNTAX AlaVirtualRouterNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry binds a Virtual Router Name to a Virtual Router index."
INDEX {
alaVirtualRouterName
}
::= { alaVirtualRouterNameTable 1 }
AlaVirtualRouterNameEntry ::= SEQUENCE {
alaVirtualRouterName SnmpAdminString,
alaVirtualRouterNameIndex Integer32,
alaVirtualRouterNameRowStatus RowStatus,
alaVirtualRouterProfile SnmpAdminString,
alaVirtualRouterMaxRouteMaps Integer32,
alaVirtualRouterMaxSequences Integer32,
alaVirtualRouterMaxTlvs Integer32,
alaVirtualRouterMaxAccessLists Integer32,
alaVirtualRouterMaxAddressBlocks Integer32,
alaVirtualRouterMaxMatchInterfaces Integer32,
alaVirtualRouterNoAutoLoadVrrp TruthValue
}
alaVirtualRouterName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a Virtual Router."
::= { alaVirtualRouterNameEntry 1 }
alaVirtualRouterNameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with the Virtual Router name."
::= { alaVirtualRouterNameEntry 2 }
alaVirtualRouterNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaVirtualRouterNameEntry 3 }
alaVirtualRouterProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The profile name of the VRF. Profiles place constraints on what the
VRF can contain."
::= { alaVirtualRouterNameEntry 4 }
alaVirtualRouterMaxRouteMaps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of route-maps allowed in this VRF."
::= { alaVirtualRouterNameEntry 5 }
alaVirtualRouterMaxSequences OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of route-map sequences allowed in this VRF."
::= { alaVirtualRouterNameEntry 6 }
alaVirtualRouterMaxTlvs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of route-map TLV blocks allowed in this VRF."
::= { alaVirtualRouterNameEntry 7 }
alaVirtualRouterMaxAccessLists OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of access-lists allowed in this VRF."
::= { alaVirtualRouterNameEntry 8 }
alaVirtualRouterMaxAddressBlocks OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of access-list address blocks allowed in this VRF."
::= { alaVirtualRouterNameEntry 9 }
alaVirtualRouterMaxMatchInterfaces OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of route-map match interfaces allowed in this VRF."
::= { alaVirtualRouterNameEntry 10 }
alaVirtualRouterNoAutoLoadVrrp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If true, do not automatically load VRRP in max profile VRF."
DEFVAL { false }
::= { alaVirtualRouterNameEntry 11 }
-- virtual router protocol table
alaVrConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVrConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Virtual Router protocol configuration."
::= { alaVirtualRouterConfig 2 }
alaVrConfigEntry OBJECT-TYPE
SYNTAX AlaVrConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry exists for each VRF in the alaVrtualRouterNameTable.
The entry represents the status of routing protocols on a VRF instance."
INDEX {
alaVrConfigIndex
}
::= { alaVrConfigTable 1 }
AlaVrConfigEntry ::= SEQUENCE {
alaVrConfigIndex Integer32,
alaVrConfigRipStatus INTEGER,
alaVrConfigOspfStatus INTEGER,
alaVrConfigIsisStatus INTEGER,
alaVrConfigBgpStatus INTEGER,
alaVrConfigPimStatus INTEGER,
alaVrConfigDvmrpStatus INTEGER,
alaVrConfigRipngStatus INTEGER,
alaVrConfigOspf3Status INTEGER,
alaVrConfigMplsLdpStatus INTEGER,
alaVrConfigVrrpStatus INTEGER
}
alaVrConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with the Virtual Router name."
::= { alaVrConfigEntry 1 }
alaVrConfigRipStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of RIP on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 2 }
alaVrConfigOspfStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of OSPF on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 3 }
alaVrConfigIsisStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of ISIS on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 4 }
alaVrConfigBgpStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of BGP on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 5 }
alaVrConfigPimStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of PIM on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 6 }
alaVrConfigDvmrpStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of DVMRP on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 7 }
alaVrConfigRipngStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of Ripng on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 8 }
alaVrConfigOspf3Status OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of OSPFv3 on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 9 }
alaVrConfigMplsLdpStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Controls the load status of MPLS LDP on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 10 }
alaVrConfigVrrpStatus OBJECT-TYPE
SYNTAX INTEGER {
loaded(1),
notloaded(2),
loading(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the load status of VRRP on this router.
Loaded(1) is the only valid Set value."
DEFVAL { notloaded }
::= {alaVrConfigEntry 11 }
-- virtual router profile table
alaVirtualRouterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaVirtualRouterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table contains capabilities of a VRF profile."
::= { alaVirtualRouterConfig 3 }
alaVirtualRouterProfileEntry OBJECT-TYPE
SYNTAX AlaVirtualRouterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry defines a VRF profile."
INDEX {
alaVirtualRouterProfileName
}
::= { alaVirtualRouterProfileTable 1 }
AlaVirtualRouterProfileEntry ::= SEQUENCE {
alaVirtualRouterProfileName SnmpAdminString,
alaVirtualRouterProfileMaxRouteMaps Integer32,
alaVirtualRouterProfileMaxSequences Integer32,
alaVirtualRouterProfileMaxTlvs Integer32,
alaVirtualRouterProfileMaxAccessLists Integer32,
alaVirtualRouterProfileMaxAddressBlocks Integer32,
alaVirtualRouterProfileMaxMatchInterfaces Integer32
}
alaVirtualRouterProfileName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the profile."
::= { alaVirtualRouterProfileEntry 1 }
alaVirtualRouterProfileMaxRouteMaps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of route-maps supported in this VRF profile."
::= { alaVirtualRouterProfileEntry 2 }
alaVirtualRouterProfileMaxSequences OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of route-map sequences supported in this VRF
profile."
::= { alaVirtualRouterProfileEntry 3 }
alaVirtualRouterProfileMaxTlvs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of route-map TLVs supported in this VRF profile.
TLVs are used to store match and set clauses."
::= { alaVirtualRouterProfileEntry 4 }
alaVirtualRouterProfileMaxAccessLists OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of route-map access-lists supported in this
VRF profile. Access-lists contain IPv4 or IPv6 addresses."
::= { alaVirtualRouterProfileEntry 5 }
alaVirtualRouterProfileMaxAddressBlocks OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of route-map address blocks supported in this
VRF profile. Address blocks are used to hold the access-lists
routes."
::= { alaVirtualRouterProfileEntry 6 }
alaVirtualRouterProfileMaxMatchInterfaces OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of route-map interfaces that can be configured
match clauses supported in this VRF profile."
::= { alaVirtualRouterProfileEntry 7 }
-- conformance information
alcatelIND1VirtualRouterMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1VirtualRouterMIB 2 }
alcatelIND1VirtualRouterMIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1VirtualRouterMIBConformance 1 }
alcatelIND1VirtualRouterMIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1VirtualRouterMIBConformance 2 }
-- compliance statements
alaVirtualRouterCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running Route Maps
and implementing the ALCATEL-IND1-VIRTUALROUTER MIB."
MODULE -- this module
MANDATORY-GROUPS { alaVirtualRouterConfigMIBGroup }
::= { alcatelIND1VirtualRouterMIBCompliances 1 }
-- units of conformance
alaVirtualRouterConfigMIBGroup OBJECT-GROUP
OBJECTS { alaVirtualRouterNameIndex, alaVirtualRouterNameRowStatus,
alaVirtualRouterProfile, alaVirtualRouterMaxRouteMaps,
alaVirtualRouterMaxSequences, alaVirtualRouterMaxTlvs,
alaVirtualRouterMaxAccessLists, alaVirtualRouterMaxAddressBlocks,
alaVirtualRouterMaxMatchInterfaces, alaVirtualRouterNoAutoLoadVrrp,
alaVrConfigRipStatus, alaVrConfigOspfStatus, alaVrConfigIsisStatus,
alaVrConfigBgpStatus, alaVrConfigPimStatus,
alaVrConfigDvmrpStatus, alaVrConfigRipngStatus,
alaVrConfigOspf3Status, alaVrConfigMplsLdpStatus, alaVrConfigVrrpStatus,
alaVirtualRouterProfileMaxRouteMaps, alaVirtualRouterProfileMaxSequences,
alaVirtualRouterProfileMaxTlvs, alaVirtualRouterProfileMaxAccessLists,
alaVirtualRouterProfileMaxAddressBlocks, alaVirtualRouterProfileMaxMatchInterfaces }
STATUS current
DESCRIPTION
"A collection of objects to support management of global
configuration parameters of the Virtual Router Module."
::= { alcatelIND1VirtualRouterMIBGroups 1 }
END