mibs/nokia/aos7/ALCATEL-IND1-VLAN-MGR-MIB
ALCATEL-IND1-VLAN-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, IpAddress, Integer32, Unsigned32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
softentIND1VlanMgt FROM ALCATEL-IND1-BASE;
alcatelIND1VLANMgrMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Vlan Manager for the distribution of vlan configuration information,
including the association between vlans and ports.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { softentIND1VlanMgt 1}
alcatelIND1VLANMgrMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Managed Objects."
::= { alcatelIND1VLANMgrMIB 1 }
alcatelIND1VLANMgrMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Conformance Information."
::= { alcatelIND1VLANMgrMIB 2 }
alcatelIND1VLANMgrMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Units Of Conformance."
::= { alcatelIND1VLANMgrMIBConformance 1 }
alcatelIND1VLANMgrMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VLAN Manager
Subsystem Compliance Statements."
::= { alcatelIND1VLANMgrMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVlan OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Virtual LAN instances in this device."
::= { vlanMgrVlan 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN entry."
INDEX { vlanNumber }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE {
vlanNumber
Integer32,
vlanDescription
SnmpAdminString,
vlanAdmStatus
INTEGER,
vlanOperStatus
INTEGER,
vlanStatus
RowStatus,
vlanRouterStatus
INTEGER,
vlanSrcLearningStatus
INTEGER,
vlanType
INTEGER,
vlanMtu
Integer32,
vlanAfdCfg
Integer32
}
vlanNumber OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number identifying this instance. Valid
range from 1 to 4094."
::= { vlanEntry 1 }
vlanDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Textual description of the VLAN instance."
::= { vlanEntry 2 }
vlanAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative status which can be set by
configuration. Disable(1) will disable ALL vports
that are connected to this VLAN, enable(2) will enable
ALL ports on this VLAN, delete(3) will detach and
delete the ports/routers AND remove the VLAN."
DEFVAL { enabled }
::= { vlanEntry 3 }
vlanOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provide operating status of a particular VLAN environment."
DEFVAL { inactive }
::= { vlanEntry 4 }
vlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status to control creation/deletion of vlans."
::= { vlanEntry 5 }
vlanRouterStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ipv4router(1),
ipv6router(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if any IP routers are configured on this vlan."
DEFVAL { none }
::= { vlanEntry 6 }
vlanSrcLearningStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the mac learning is enabled or disabled
on this vlan."
DEFVAL { enabled }
::= { vlanEntry 7 }
vlanType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
service(1),
multicastEnt(2),
multicastService(3),
dynamic(4),
standard(5),
ipc(6),
vipVlan(7),
erpVlan(8),
mtpVlan(9),
unpDynamic(10),
dynamicRemote(11),
bvlan(12),
controlBvlan(13),
evbVlan(14),
vcmipc(15),
fcoeVlan(16),
openflowVlan(17),
routerVlan(18),
primaryVlan(19),
isolatedVlan(20),
communityVlan(21),
allVlan(22),
invalidVlan(23)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the vlan"
DEFVAL { standard }
::= { vlanEntry 8 }
vlanMtu OBJECT-TYPE
SYNTAX Integer32 (512..10222)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum transmission unit i.e. the maximum size of packet that this
vlan can handle. It ranges from 512 to 1500 (for OS6XXX) and 10222
(for OS7XXX and OS8XXX) with e2 encapsulation.With snap encapsulation
it ranges from 512 to 1492"
DEFVAL { 1500 }
::= { vlanEntry 9 }
vlanAfdCfg OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether config was generated by AFD or user, 1 specifies user config and
2 specifies afd config"
DEFVAL { 1 }
::= { vlanEntry 10 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVpa OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vpaTable OBJECT-TYPE
SYNTAX SEQUENCE OF VpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Virtual LAN instances in this device."
::= { vlanMgrVpa 1 }
vpaEntry OBJECT-TYPE
SYNTAX VpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN-Port Association (VPA) entry."
INDEX { vpaVlanNumber, vpaIfIndex }
::= { vpaTable 1 }
VpaEntry ::= SEQUENCE {
vpaVlanNumber
Integer32,
vpaIfIndex
Unsigned32,
vpaType
INTEGER,
vpaState
INTEGER,
vpaStatus
RowStatus
}
vpaVlanNumber OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number component of this instance. Valid
range from 1 to 4094."
::= { vpaEntry 1 }
vpaIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1001..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex component of this instance."
::= {vpaEntry 2 }
vpaType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
cfgDefault(1),
qTagged(2),
dynamic(3),
vstkDoubleTag(4),
vstkTranslate(5),
forbidden(6),
mirrored(7),
bvpa(8),
unpUntagged(9),
unpTagged(10),
evbTagged(11)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of this vpa. Two are statically configured:
configured default VPA and qTagged VPA.
The other two are dynamically created according to rules/policies:
dynamic default and mobile. The dynamic default VPA is the
same as a mobile VPA except that it also the default VPA for the port."
DEFVAL { cfgDefault }
::= { vpaEntry 3 }
vpaState OBJECT-TYPE
SYNTAX INTEGER {
forwarding(0),
blocking(1),
inactive(2),
invalid(3),
dhlBlocking(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this vpa:
1. inactive - link down
2. blocking - link up, forwarding down
3. forwarding - link up, forwarding up, sources learned normally
4. filtering - link up, forwarding up, sources filtered
5. DHL Blocking - link up, forwarding down for a DHL port."
DEFVAL { inactive }
::= { vpaEntry 4 }
vpaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is used to create or delete staticPrimary VPAs (default vlans
on a port ). Creation replaces the existing staticPrimary VPA
while deletion replaces the existing VPA so that the vlan number
is 1 for the given port. Of course the corresponding vlan and
port must exist."
::= { vpaEntry 5 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVlanSet OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanSetVlanCount OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of existing VLANs on switch."
::= { vlanMgrVlanSet 1 }
vlanSetDynamicVlanCount OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of number of dynamic vlans in the system"
::= { vlanMgrVlanSet 2 }
vlanSetIpRouterCount OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of VLANs on switch with IP router port configured."
::= { vlanMgrVlanSet 3 }
vlanSetVstkVlanCount OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of Vlan Stacking vlans in the system"
::= { vlanMgrVlanSet 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1VLANMgrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for
VLAN Manager."
MODULE
MANDATORY-GROUPS
{
vlanMgrVlanGroup,
vlanMgrVpaGroup,
vlanMgrVlanSetGroup
}
::= { alcatelIND1VLANMgrMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
vlanMgrVlanGroup OBJECT-GROUP
OBJECTS
{
vlanDescription,
vlanAdmStatus,
vlanOperStatus,
vlanStatus,
vlanRouterStatus,
vlanSrcLearningStatus,
vlanType,
vlanMtu,
vlanAfdCfg
}
STATUS current
DESCRIPTION
"Collection of objects for management of Vlan Manager VLANs."
::= { alcatelIND1VLANMgrMIBGroups 1 }
vlanMgrVpaGroup OBJECT-GROUP
OBJECTS
{
vpaType,
vpaState,
vpaStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of Vlan Manager VPAs."
::= { alcatelIND1VLANMgrMIBGroups 2 }
vlanMgrVlanSetGroup OBJECT-GROUP
OBJECTS
{
vlanSetVlanCount,
vlanSetDynamicVlanCount,
vlanSetIpRouterCount,
vlanSetVstkVlanCount
}
STATUS current
DESCRIPTION
"Collection of objects for Vlan Manager global properties."
::= { alcatelIND1VLANMgrMIBGroups 3 }
END