mibs/nortel/RAPID-CLIENT-MIB
RAPID-CLIENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
OBJECT-IDENTITY, enterprises,
IpAddress, Unsigned32, TimeTicks FROM SNMPv2-SMI
DateAndTime FROM SNMPv2-TC
rapidstream FROM RAPID-MIB;
rsInfoModule MODULE-IDENTITY
LAST-UPDATED "0103061200Z"
ORGANIZATION "WatchGuard Technologies, Inc."
CONTACT-INFO
" Ella Yu
WatchGuard Technologies, Inc.
1841 Zanker Road
San Jose, CA 95112
USA
408-519-4888
ella.yu@watchguard.com "
DESCRIPTION
"The MIB module describes client information
of RapidStream system."
REVISION "200104201200Z"
DESCRIPTION
"Initial revision."
REVISION "200211011200Z"
DESCRIPTION
"Changed CONTACT-INFO."
::= { rapidstream 6 }
rsClientMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for DHCP Server, DHCP Client
and PPPoE Client"
::= { rsInfoModule 2 }
rsClientDHCPServer OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all DHCP server related information."
::= { rsClientMIB 1 }
rsClientDHCPClient OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all DHCP client related information."
::= { rsClientMIB 2 }
rsClientPPPoEClient OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all PPPoE client related information."
::= { rsClientMIB 3 }
rsClientDHCPServerEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
relay(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether if DHCP Server has been enabled. "
::= { rsClientDHCPServer 1 }
rsClientDHCPServerStartIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The starting IP address of the range of IP addresses leased by the DHCP server."
::= { rsClientDHCPServer 2 }
rsClientDHCPServerEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last IP address of the range of IP addresses leased by the DHCP Server. "
::= { rsClientDHCPServer 3 }
rsClientDHCPServerLeaseTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lease time of an address assigned to a DHCP client. "
::= { rsClientDHCPServer 4 }
rsClientDHCPServerNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the rsClientDHCPServerTable. "
::= { rsClientDHCPServer 5 }
rsClientDHCPServerConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF RSClientDHCPServerConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the client lease table of the DHCP Server."
::= { rsClientDHCPServer 6 }
rsClientDHCPServerRelayServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of remote DHCP server to which
DHCP requests should be relayed."
::= { rsClientDHCPServer 7 }
rsClientDHCPServerConnEntry OBJECT-TYPE
SYNTAX RSClientDHCPServerConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the leasing
information of an assigned address by the DHCP Server."
INDEX {
rsClientDHCPServerConnIPAddr
}
::= { rsClientDHCPServerConnTable 1 }
RSClientDHCPServerConnEntry ::= SEQUENCE {
rsClientDHCPServerConnIPAddr IpAddress,
rsClientDHCPServerConnClientHostName OCTET STRING,
rsClientDHCPServerConnMACAddr OCTET STRING (SIZE(6)),
rsClientDHCPServerConnLeaseTimeStart DateAndTime,
rsClientDHCPServerConnLeaseTimeEnd DateAndTime
}
rsClientDHCPServerConnClientHostName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hostname of the client."
::= { rsClientDHCPServerConnEntry 1 }
rsClientDHCPServerConnIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address assigned to the client."
::= { rsClientDHCPServerConnEntry 2 }
rsClientDHCPServerConnMACAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the client."
::= { rsClientDHCPServerConnEntry 3 }
rsClientDHCPServerConnLeaseTimeStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the lease starts."
::= { rsClientDHCPServerConnEntry 4 }
rsClientDHCPServerConnLeaseTimeEnd OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the lease ends."
::= { rsClientDHCPServerConnEntry 5 }
-- DHCP Client information
rsClientDHCPClientEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether interface 1 (public) is configured to obtain IP address through DHCP."
::= { rsClientDHCPClient 1 }
rsClientDHCPClientDomainName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The domain name of the DHCP Client."
::= { rsClientDHCPClient 2 }
rsClientDHCPClientDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway obtained by the DHCP client."
::= { rsClientDHCPClient 3 }
rsClientDHCPClientDNSOne OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the primary DNS server obtained by the DHCP client."
::= { rsClientDHCPClient 4 }
rsClientDHCPClientDNSTwo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the secondary DNS server obtained by the DHCP client."
::= { rsClientDHCPClient 5 }
-- PPPoE Client information
rsClientPPPoEClientEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the interface 1 (public) is configured to use PPPoE."
::= { rsClientPPPoEClient 1 }
rsClientPPPoEClientADSLStatus OBJECT-TYPE
SYNTAX INTEGER {
disconnect(0), -- ADSL is disconnected
initialize(1), -- ADSL is initializing
establish(2), -- ASDL is established
authenticate(3), -- ASDL is authenticated
network(4),
running(5) -- ASDL is running
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current ADSL status of the PPPoE Client. "
::= { rsClientPPPoEClient 2 }
rsClientPPPoEClientLocalIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address obtained by the PPPoE Client."
::= { rsClientPPPoEClient 3 }
rsClientPPPoEClientRemoteIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the PPP server this PPPoE client connects to."
::= { rsClientPPPoEClient 4 }
rsClientPPPoEClientNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the PPPoE client."
::= { rsClientPPPoEClient 5 }
rsClientPPPoEClientDNSOne OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the primary DNS server obtained."
::= { rsClientPPPoEClient 6 }
rsClientPPPoEClientDNSTwo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the secondary DNS server obtained."
::= { rsClientPPPoEClient 7 }
rsClientPPPoEADSLPeerMACAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC Address of the PPP server this client connects to."
::= { rsClientPPPoEClient 8 }
rsClientPPPoEClientConnTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connection time of the PPPoE connection."
::= { rsClientPPPoEClient 9 }
END