mibs/nortel/RAPID-IPSEC-ENDPOINT-PAIR-MIB
RAPID-IPSEC-ENDPOINT-PAIR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Gauge32,
OBJECT-IDENTITY, enterprises,
IpAddress FROM SNMPv2-SMI
rapidstream FROM RAPID-MIB;
rsIpsecEndpointPairModule MODULE-IDENTITY
LAST-UPDATED "9909081200Z"
ORGANIZATION "WatchGuard Technologies, Inc."
CONTACT-INFO
" Ella Yu
WatchGuard Technologies, Inc.
1841 Zanker Road
San Jose, CA 95112
USA
408-519-4888
ella.yu@watchguard.com "
DESCRIPTION
"The MIB module describes generic Ipsec Endpoint Pair information
of RapidStream system. Mainly, the information
obtained from this MIB is used to constructed topological
view of IPSec security gateways that are connected by
IPSec tunnels.
An IPSec Endpoint Pair is a pair of security gateways that
are connected with 0 or more IPSec SA's in tunnel mode.
It contains information of aggregated information
of tunnel mode SA's between two security gateways.
An IPSec Endpoint Pair is identified by a pair of IP addresses.
Therefore, if an IPSec security gateway X has 2 external
IP addresses while IPsec secruity gateway Y has 3 external
IP addresses, there are potentially 6 IPsec Endpoint Pairs
between X and Y."
REVISION "200003211200Z"
DESCRIPTION
"Initial revision."
REVISION "200211011200Z"
DESCRIPTION
"Changed CONTACT-INFO."
::= { rapidstream 5 }
rsIpsecEndpointPairMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all IPSec tunnel
branches."
::= { rsIpsecEndpointPairModule 1 }
rsIpsecEndpointPair OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all IPSec
tunnel information."
::= { rsIpsecEndpointPairMIB 1 }
rsIpsecEndpointPairStatistics OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all objects which
are global counters for IPSec tunnels."
::= { rsIpsecEndpointPairMIB 2 }
rsIpsecEndpointPairNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the rsIpsecEndpointPairTable. "
::= { rsIpsecEndpointPair 1 }
rsIpsecEndpointPairTable OBJECT-TYPE
SYNTAX SEQUENCE OF RSIpsecEndpointPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the connection table describing all current
IPSec tunnels exist on this entity."
::= { rsIpsecEndpointPair 2 }
rsIpsecEndpointPairEntry OBJECT-TYPE
SYNTAX RSIpsecEndpointPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
IPSec tunnel between two IPSec security gateways."
INDEX{ rsIpsecEndpointPairIndex }
::= { rsIpsecEndpointPairTable 1 }
RSIpsecEndpointPairEntry ::= SEQUENCE {
rsIpsecEndpointPairIndex Integer32,
rsIpsecEndpointPairLocalAddr IpAddress,
rsIpsecEndpointPairPeerAddr IpAddress,
rsIpsecEndpointPairInSAs Unsigned32,
rsIpsecEndpointPairOutSAs Unsigned32,
rsIpsecEndpointPairInAccKbytes Counter32,
rsIpsecEndpointPairOutAccKbytes Counter32,
rsIpsecEndpointPairInPackets Counter32,
rsIpsecEndpointPairOutPackets Counter32,
rsIpsecEndpointPairDecryptErrors Counter32,
rsIpsecEndpointPairAuthErrors Counter32,
rsIpsecEndpointPairReplayErrors Counter32,
rsIpsecEndpointPairPolicyErrors Counter32,
rsIpsecEndpointPairPadErrors Counter32,
rsIpsecEndpointPairOtherReceiveErrors Counter32,
rsIpsecEndpointPairSendErrors Counter32
}
rsIpsecEndpointPairIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The running index of this IPSec endpoint pair."
::= { rsIpsecEndpointPairEntry 1 }
rsIpsecEndpointPairLocalAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address of the current IPSec ednpoint pair."
::= { rsIpsecEndpointPairEntry 2 }
rsIpsecEndpointPairPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the current IPSec endpoint pair."
::= { rsIpsecEndpointPairEntry 3 }
rsIpsecEndpointPairInSAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound IPSEC SA's within this
IPSec endpoint pair."
::= { rsIpsecEndpointPairEntry 4 }
rsIpsecEndpointPairOutSAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound IPSEC SA's within this
IPSec endpoint pair."
::= { rsIpsecEndpointPairEntry 5 }
rsIpsecEndpointPairInAccKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total inbound traffic in Kbytes since the establish of
this connection."
::= { rsIpsecEndpointPairEntry 6 }
rsIpsecEndpointPairOutAccKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total outound traffic in Kbytes since the establish of
this connection."
::= { rsIpsecEndpointPairEntry 7 }
rsIpsecEndpointPairInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of inbound packets since the establish of
this connection."
::= { rsIpsecEndpointPairEntry 8 }
rsIpsecEndpointPairOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outound packets since the establish of
this connection."
::= { rsIpsecEndpointPairEntry 9 }
rsIpsecEndpointPairDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to decryption
error since the establish of this connection."
::= { rsIpsecEndpointPairEntry 10 }
rsIpsecEndpointPairAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to authentication
error since the establish of this connection."
::= { rsIpsecEndpointPairEntry 11 }
rsIpsecEndpointPairReplayErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to replay
error since the establish of this connection."
::= { rsIpsecEndpointPairEntry 12}
rsIpsecEndpointPairPolicyErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to policy
error since the establish of this connection."
::= { rsIpsecEndpointPairEntry 13 }
rsIpsecEndpointPairPadErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to pad value
error since the establish of this connection."
::= { rsIpsecEndpointPairEntry 14 }
rsIpsecEndpointPairOtherReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, and may include packets dropped due to congestion
at the decryption element."
::= { rsIpsecEndpointPairEntry 15 }
rsIpsecEndpointPairSendErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded due to any error.
This may include errors due to a lack of transmit buffers."
::= { rsIpsecEndpointPairEntry 16 }
-- global statistics
rsIpsecEndpointPairTotalInSAs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of active inbound SA's in the entity."
::= { rsIpsecEndpointPairStatistics 1 }
rsIpsecEndpointPairTotalOutSAs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of active outbound SA's in the entity."
::= { rsIpsecEndpointPairStatistics 2 }
rsIpsecEndpointPairTotalInAccKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total inbound IPsec traffic of this entity."
::= { rsIpsecEndpointPairStatistics 3 }
rsIpsecEndpointPairTotalOutAccKbytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total outbound IPsec traffic of this entity."
::= { rsIpsecEndpointPairStatistics 4 }
rsIpsecEndpointPairTotalInPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total inbound IPsec packets of this entity."
::= { rsIpsecEndpointPairStatistics 5 }
rsIpsecEndpointPairTotalOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total outbound IPsec packets of this entity."
::= { rsIpsecEndpointPairStatistics 6 }
rsIpsecEndpointPairTotalDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets on this entity discarded due to encryption
error."
::= { rsIpsecEndpointPairStatistics 7 }
rsIpsecEndpointPairTotalAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets on this entity discarded
due to authentication errors."
::= { rsIpsecEndpointPairStatistics 8 }
rsIpsecEndpointPairTotalReplayErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to replay
errors on this entity."
::= { rsIpsecEndpointPairStatistics 9 }
rsIpsecEndpointPairTotalPolicyErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to policy
errors on this entity."
::= { rsIpsecEndpointPairStatistics 10 }
rsIpsecEndpointPairTotalPadErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets on this entity discarded due to pad value
error."
::= { rsIpsecEndpointPairStatistics 11 }
rsIpsecEndpointPairTotalOtherReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets on this entity discarded due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, and may include packets dropped due to congestion
at the decryption element."
::= { rsIpsecEndpointPairStatistics 12 }
rsIpsecEndpointPairTotalSendErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded due to any error on
this entity."
::= { rsIpsecEndpointPairStatistics 13 }
rsIpsecEndpointPairPeerIPToTunnel OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all tunnels
information of the policies."
::= {rsIpsecEndpointPairMIB 3}
rsIpsecEndpointPairPeerIPToTunnelNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of tunnels in the peeriptotunnel table. "
::= { rsIpsecEndpointPairPeerIPToTunnel 1 }
rsIpsecEndpointPairPeerIPToTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF RSIpsecEndpointPairPeerIPToTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The peeriptotunnel table in the endpointpair mib."
::= { rsIpsecEndpointPairPeerIPToTunnel 2 }
rsIpsecEndpointPairPeerIPToTunnelEntry OBJECT-TYPE
SYNTAX RSIpsecEndpointPairPeerIPToTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the peer ip and tunnel
information."
INDEX {
rsIpsecEndpointPairPeerIPToTunnelPeerIP,
rsIpsecEndpointPairPeerIPToTunnelTunnelID
}
::= { rsIpsecEndpointPairPeerIPToTunnelTable 1 }
RSIpsecEndpointPairPeerIPToTunnelEntry ::= SEQUENCE {
rsIpsecEndpointPairPeerIPToTunnelPeerIP IpAddress,
rsIpsecEndpointPairPeerIPToTunnelTunnelID Integer32
}
rsIpsecEndpointPairPeerIPToTunnelPeerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer ip of the peeriptotunnel table."
::= {rsIpsecEndpointPairPeerIPToTunnelEntry 1}
rsIpsecEndpointPairPeerIPToTunnelTunnelID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel id of the peeriptotunnel table."
::= {rsIpsecEndpointPairPeerIPToTunnelEntry 2}
END