mibs/vmware/VMWARE-VMINFO-MIB
-- **********************************************************
-- Copyright 2008 VMware, Inc. All rights reserved.
-- **********************************************************
VMWARE-VMINFO-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, Integer32, OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, PhysAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
VmwConnectedState
FROM VMWARE-TC-MIB
vmwESXNotifications
FROM VMWARE-ENV-MIB
vmwVirtMachines, vmwTraps
FROM VMWARE-ROOT-MIB;
vmwVmInfoMIB MODULE-IDENTITY
LAST-UPDATED "201109170000Z"
ORGANIZATION "VMware, Inc"
CONTACT-INFO
"VMware, Inc
3401 Hillview Ave
Palo Alto, CA 94304
Tel: 1-877-486-9273 or 650-427-5000
Fax: 650-427-5001
Web: http://communities.vmware.com/community/developer/forums/managementapi
"
DESCRIPTION
"This MIB module provides for monitoring of inventory and state via polling
and notifications of state changes for virtual machines residing on
this host system. This MIB module also provides a mapping beween SMI
managed objects defined here and their corresponding VMware Virtual
Infrastructure Management (VIM) API properties."
REVISION "201109170000Z"
DESCRIPTION
"Remove vmwVmID as it duplicates vmwVmID."
REVISION "201006220000Z"
DESCRIPTION
"Add managed object vmwVmUUID to vmTable to allow management applications
to identify a VM uniquely over a set of ESX systems. This value is useful when
VMs may move between systems."
REVISION "200810230000Z"
DESCRIPTION
"Add to comments the Managed Object Browser (MOB) URLs which provide
data this MIB module exposes.
Handle cases in reporting string for managed objects in this mib
where the values depend on additional operator configuration.
Instead of returning an empty string, an error message of the form:
W|E: error description
Add vmNumCpus to vmwVmTable to better report on VSMP virtual machines.
Add vmwVmNetConnected and vmwVmMAC to vmwVmNetTable
VIM Virtual Devices index range values are documented based on ESX 3/4
implementation, they may change in the future releases.
Update comments to note that CDROM also lists DVDROM virtual devices."
REVISION "200712270000Z"
DESCRIPTION
"This is the first revision in SMIv2 format. Prior version was published as SMIv1.
Notifications found here were formerly in the VMWARE-TRAPS-MIB module."
::= { vmwVirtMachines 10 }
-- the vm inventory for this system
vmwVmTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmwVmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on virtual machines that have been
configured on the system."
::= { vmwVirtMachines 1 }
vmwVmEntry OBJECT-TYPE
SYNTAX VmwVmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a registered VM on this ESX system."
INDEX { vmwVmIdx }
::= { vmwVmTable 1 }
VmwVmEntry ::= SEQUENCE {
vmwVmIdx Integer32,
vmwVmDisplayName DisplayString,
vmwVmConfigFile DisplayString,
vmwVmGuestOS DisplayString,
vmwVmMemSize Integer32,
vmwVmState DisplayString,
vmwVmVMID Integer32,
vmwVmGuestState DisplayString,
vmwVmCpus Integer32,
vmwVmUUID OCTET STRING
}
vmwVmIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An operational identifier given the VM when registered on this ESX system.
The value is not unique across ESX systems and may change upon reboot.
VIM property: ha-vm-folder
MOB: https://esx.example.com/mob/?moid=ha%2dfolder%2dvm
A given Virtual Machine Instance can be queried using this URL:
MOB: https://esx.example.com/mob/?moid=vmwVmIdx"
::= { vmwVmEntry 1 }
vmwVmDisplayName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name by which this vm is displayed. It is not guaranteed to be unique.
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=summary%2eguest"
::= { vmwVmEntry 2 }
vmwVmConfigFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path to the configuration file for this vm expressed as a fully
qualified path name in POSIX or DOS extended format
VM Config file File name:
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2efiles
VM Datastore containing the filename:
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2edatastoreUrl"
::= { vmwVmEntry 3 }
vmwVmGuestOS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operating system running on this vm. This value corresponds to the
value specified when creating the VM and unless set correctly may differ
from the actual OS running. Will return one of the values if set in order:
Vim.Vm.GuestInfo.guestFullName
Vim.Vm.GuestInfo.guestId
Vim.Vm.GuestInfo.guestFamily
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=guest
where moid = vmwVmIdx.
If VMware Tools is not running, value will be of form 'E: error message'"
::= { vmwVmEntry 4 }
vmwVmMemSize OBJECT-TYPE
SYNTAX Integer32
UNITS "megabytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Memory configured for this virtual machine.
Memory > MAX Integer32 is reported as max integer32.
VIM Property: memoryMB
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware"
::= { vmwVmEntry 5 }
vmwVmState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power state of the virtual machine.
VIM Property: powerState
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=summary%2eruntime"
::= { vmwVmEntry 6 }
vmwVmVMID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"No longer provided, use vmwVmIdx. See vmwVmUUID for cross system,
unique, persistent identifier."
::= { vmwVmEntry 7 }
vmwVmGuestState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operation mode of guest operating system. Values include:
running - Guest is running normally.
shuttingdown - Guest has a pending shutdown command.
resetting - Guest has a pending reset command.
standby - Guest has a pending standby command.
notrunning - Guest is not running.
unknown - Guest information is not available.
VIM Property: guestState
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=guest"
::= { vmwVmEntry 8 }
vmwVmCpus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of virtual CPUs assigned to this virtual machine.
VIM Property: numCPU
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware"
::= { vmwVmEntry 9 }
vmwVmUUID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(36..72))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier for this VM. Must be unique across a set of ESX systems
managed by an instance of vSphere Center.
Example value: 564d95d4-bff7-31fd-f20f-db2d808a8b32
VIM Property: uuid
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config"
::= { vmwVmEntry 10 }
-- Host Bus Adapters
vmwVmHbaTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmwVmHbaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of host bus adapters (hba) for all vms in vmwVmTable."
::= { vmwVirtMachines 2 }
vmwVmHbaEntry OBJECT-TYPE
SYNTAX VmwVmHbaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a given virtual machine host bus adapter."
INDEX { vmwHbaVmIdx, vmwVmHbaIdx }
::= { vmwVmHbaTable 1 }
VmwVmHbaEntry ::= SEQUENCE {
vmwHbaVmIdx Integer32,
vmwVmHbaIdx Integer32,
vmwHbaNum DisplayString,
vmwHbaVirtDev DisplayString
}
vmwHbaVmIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This number corresponds to the vmwVmIdx in vmwVmTable."
::= { vmwVmHbaEntry 1 }
vmwVmHbaIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a given Host Bus adapter in this VM. May
change across system reboots."
::= { vmwVmHbaEntry 2 }
vmwHbaNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the hba as it appears in the VM Settings.
VIM Property: Virtual Device index of 200-299.
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware"
::= { vmwVmHbaEntry 3 }
vmwHbaVirtDev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The oem host bus adapter hardware being emulated to the Guest OS.
MOB: Not visible."
::= { vmwVmHbaEntry 4 }
-- Host Bus Adapter Targets
vmwHbaTgtTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmwHbaTgtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all virtual disks configured for vms in vmwVmTable."
::= { vmwVirtMachines 3 }
vmwHbaTgtEntry OBJECT-TYPE
SYNTAX VmwHbaTgtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a specific storage disk. Index may change across reboots."
INDEX { vmwHbaTgtVmIdx, vmwHbaTgtIdx }
::= { vmwHbaTgtTable 1 }
VmwHbaTgtEntry ::= SEQUENCE {
vmwHbaTgtVmIdx Integer32,
vmwHbaTgtIdx Integer32,
vmwHbaTgtNum DisplayString
}
vmwHbaTgtVmIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This number corresponds to vmwVmIdx in vmwVmTable."
::= { vmwHbaTgtEntry 1 }
vmwHbaTgtIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value identifies a particular disk."
::= { vmwHbaTgtEntry 2 }
vmwHbaTgtNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the disk as seen from the host bus controller
VIM Property: Virtual Device's with index of 2000-2999,3000-3999.
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware"
::= { vmwHbaTgtEntry 3 }
-- vm network interfaces
vmwVmNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmwVmNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of network adapters (nic) for all vms in vmwVmTable."
::= { vmwVirtMachines 4 }
vmwVmNetEntry OBJECT-TYPE
SYNTAX VmwVmNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a particular nic for the specified vmwVmIdx"
INDEX { vmwVmNetVmIdx, vmwVmNetIdx }
::= { vmwVmNetTable 1 }
VmwVmNetEntry ::= SEQUENCE {
vmwVmNetVmIdx Integer32,
vmwVmNetIdx Integer32,
vmwVmNetNum DisplayString,
vmwVmNetName DisplayString,
vmwVmNetConnType DisplayString,
vmwVmNetConnected VmwConnectedState,
vmwVmMAC PhysAddress
}
vmwVmNetVmIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This number corresponds to vmwVmIdx in vmwVmTable."
::= { vmwVmNetEntry 1 }
vmwVmNetIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a unique network adapter in this table.
Not guaranteed to be the same across system reboots."
::= { vmwVmNetEntry 2 }
vmwVmNetNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the device as it appears in the VM Settings.
VIM Property: Virtual Device's with index of 4000-4999.
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware"
::= { vmwVmNetEntry 3 }
vmwVmNetName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"What this virutal nic is connected to such as a virtual switch portgroup identifier.
VIM Property: Virtual Device's with index of 4000-4999.
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware
then select property 'backing' to how this nic connects.
If no backing was defined by operator, string will start with W:
If unavailable, string will start with E:"
::= { vmwVmNetEntry 4 }
vmwVmNetConnType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Do not use this value, and should an agent return it discard it."
::= { vmwVmNetEntry 5 }
vmwVmNetConnected OBJECT-TYPE
SYNTAX VmwConnectedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports 'true' if the ethernet virtual device is connected to the virtual machine."
::= { vmwVmNetEntry 6 }
vmwVmMAC OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the configured virtual hardware MAC address. If VMware
Tools is not running, or VM has not yet been powered on for the
first time and mac is to be generated by VM then the value is
zero'd out/empty. VIM Property: Virtual Device's with index of
4000-4999. MOB:
https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware"
::= { vmwVmNetEntry 7 }
-- vm floppy drive details
vmwFloppyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmwFloppyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of floppy drives for all vms in vmwVmTable."
::= { vmwVirtMachines 5 }
vmwFloppyEntry OBJECT-TYPE
SYNTAX VmwFloppyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies one specific floppy device. May change across system reboots."
INDEX { vmwFdVmIdx, vmwFdIdx }
::= { vmwFloppyTable 1 }
VmwFloppyEntry ::= SEQUENCE {
vmwFdVmIdx Integer32,
vmwFdIdx Integer32,
vmwFdName DisplayString,
vmwFdConnected VmwConnectedState
}
vmwFdVmIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This number corresponds to vmwVmIdx in vmwVmTable."
::= { vmwFloppyEntry 1 }
vmwFdIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies one specific virtual floppy device."
::= { vmwFloppyEntry 2 }
vmwFdName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"File or Device that this device is connected to, example /dev/fd0.
VIM Property: Virtual Device's with index of 8000-8999.
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware
If no backing was defined by operator, string will start with W:
If unavailable, string will start with E:"
::= { vmwFloppyEntry 3 }
vmwFdConnected OBJECT-TYPE
SYNTAX VmwConnectedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports 'true' if the floppy drive virtual device is connected to the virtual machine."
::= { vmwFloppyEntry 4 }
-- VM CDROM drive backing
vmwCdromTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmwCdromEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of DVD or CDROM drives for all vms in vmwVmTable."
::= { vmwVirtMachines 6 }
vmwCdromEntry OBJECT-TYPE
SYNTAX VmwCdromEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a specific DVD or CDROM drive. Value may change across system reboots."
INDEX { vmwCdVmIdx, vmwCdromIdx }
::= { vmwCdromTable 1 }
VmwCdromEntry ::= SEQUENCE {
vmwCdVmIdx Integer32,
vmwCdromIdx Integer32,
vmwCdromName DisplayString,
vmwCdromConnected VmwConnectedState
}
vmwCdVmIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This number corresponds to the vmwVmIdx the vmwVmTable."
::= { vmwCdromEntry 1 }
vmwCdromIdx OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the specific DVD or CDROM drive."
::= { vmwCdromEntry 2 }
vmwCdromName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the iso or device this virtual drive has been configured to use
VIM Property: Virtual Device's with index of 3000-3999 (same as disks)
MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware
then select property 'backing' to how this cdrom connects.
If no backing was defined by operator, string will start with W:
If unavailable, string will start with E:"
::= { vmwCdromEntry 3 }
vmwCdromConnected OBJECT-TYPE
SYNTAX VmwConnectedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports true if the dvd/cdrom is connected to the virtual machine."
::= { vmwCdromEntry 4 }
--
-- Notifications
--
vmwVmID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This holds the same value as vmwVmVMID of the affected vm generating the trap.
to allow polling of the affected vm in vmwVmTable."
::= { vmwTraps 101 }
vmwVmConfigFilePath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This is the path to the config file of the affected vm generating the trap
and is same as vmwVmTable vmwVmConfigFile. It is expressed as POSIX pathname."
::= { vmwTraps 102 }
vmwVmPoweredOn NOTIFICATION-TYPE
OBJECTS { vmwVmID, vmwVmConfigFilePath, vmwVmDisplayName }
STATUS current
DESCRIPTION
"This trap is sent when a virtual machine is powered on from a suspended
or a powered off state. The origin of this event can be several:
for instance may be operator initiated, existing vmx process reconnects to control subsystem.
NOTE: vms powered up due to VMotion are not reported. Upon receiving this notification client applications should
poll the vmwVmTable to obtain current status."
::= { vmwESXNotifications 1 }
vmwVmPoweredOff NOTIFICATION-TYPE
OBJECTS { vmwVmID, vmwVmConfigFilePath, vmwVmDisplayName }
STATUS current
DESCRIPTION
"This trap is sent when a virtual machine is powered off. The origin of this event can be several:
for instance may be operator initiated, vmx process terminating abnormally. NOTE: vms powered down due
to VMotion are not reported. Upon receiving this notification client applications should
poll the vmwVmTable to obtain current status."
::= { vmwESXNotifications 2 }
vmwVmHBLost NOTIFICATION-TYPE
OBJECTS { vmwVmID, vmwVmConfigFilePath, vmwVmDisplayName }
STATUS current
DESCRIPTION
"This trap is sent when a virtual machine detects a loss in guest heartbeat. The Guest heartbeat
is only sent if VMware Tools are installed in the Guest OS. Control process will send this event whenever it
determines the number of guest heartbeats for a given period of time have not been received.
Upon receiving this notification client applications should
poll the vmwVmTable to obtain current status."
::= { vmwESXNotifications 3 }
vmwVmHBDetected NOTIFICATION-TYPE
OBJECTS { vmwVmID, vmwVmConfigFilePath, vmwVmDisplayName }
STATUS current
DESCRIPTION
"This trap is sent when a virtual machine detects or regains the required number of guest heartbeats
for a given period of time. This is only sent if VMware tools are installed in the Guest OS.
Upon receiving this notification client applications should
poll the vmwVmTable to obtain current status."
::= { vmwESXNotifications 4 }
vmwVmSuspended NOTIFICATION-TYPE
OBJECTS { vmwVmID, vmwVmConfigFilePath, vmwVmDisplayName }
STATUS current
DESCRIPTION
"This trap is sent when a virtual machine is suspended. The origin of this event may be several: operator
initiated, by software api clients, and by other means.
Upon receiving this notification client applications should
poll the vmwVmTable to obtain current status."
::= { vmwESXNotifications 5 }
-- conformance information
vmwVmInfoMIBConformance OBJECT IDENTIFIER ::= { vmwVmInfoMIB 2 }
vmwVmInfoMIBCompliances OBJECT IDENTIFIER ::= { vmwVmInfoMIBConformance 1 }
vmwVmInfoMIBGroups OBJECT IDENTIFIER ::= { vmwVmInfoMIBConformance 2 }
-- compliance statements
vmwResMIBBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
VMWARE-RESOURCE-MIB."
MODULE -- this module
MANDATORY-GROUPS { vmwVmInfoGroup, vmwVmInfoNotificationGroup }
::= { vmwVmInfoMIBCompliances 2 }
vmwVmInfoGroup OBJECT-GROUP
OBJECTS {
vmwVmDisplayName,
vmwVmConfigFile,
vmwVmGuestOS,
vmwVmMemSize,
vmwVmState,
vmwVmGuestState,
vmwHbaNum,
vmwHbaVirtDev,
vmwHbaTgtNum,
vmwVmNetNum,
vmwVmNetName,
vmwVmNetConnected,
vmwVmMAC,
vmwFdName,
vmwFdConnected,
vmwCdromName,
vmwCdromConnected,
vmwVmID,
vmwVmConfigFilePath,
vmwVmCpus,
vmwVmUUID
}
STATUS current
DESCRIPTION
"These objects provide virtual machine details."
::= { vmwVmInfoMIBGroups 1 }
vmwVmInfoNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
vmwVmPoweredOn,
vmwVmPoweredOff,
vmwVmHBLost,
vmwVmHBDetected,
vmwVmSuspended
}
STATUS current
DESCRIPTION
"Group of objects describing notifications (traps)."
::= { vmwVmInfoMIBGroups 2 }
-- Obsolete details
vmwVmObsoleteGroup OBJECT-GROUP
OBJECTS {
vmwVmVMID,
vmwVmNetConnType
}
STATUS obsolete
DESCRIPTION
"Managed objects that should not be used."
::= { vmwVmInfoMIBGroups 3 }
END -- end of module VMWARE-VMINFO-MIB.