Sign upLogin

lncm/noma

View on GitHub
Star

Showing 179 of 179 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def usb_part_size(partition):
    """Return USB partition size in bytes

    :param partition: device
    :type partition: string, e.g. "sda"
Severity: Major
Found in noma/usb.py and 1 other location - About 1 day to fix
noma/usb.py on lines 95..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def sd_part_size(partition):
    """Return SD partition size in bytes

    :param partition: device
    :type partition: string, e.g. "sda"
Severity: Major
Found in noma/usb.py and 1 other location - About 1 day to fix
noma/usb.py on lines 67..92

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function fastsync has a Cognitive Complexity of 54 (exceeds 5 allowed). Consider refactoring.
Open

def fastsync():
    """
    Download blocks and chainstate snapshot

    :return bool: success status
Severity: Minor
Found in noma/bitcoind.py - About 1 day to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def usb_partitions():
    """list usb partitions"""
    partitions = []
    for device in usb_devs():
        for partition in glob.glob("/sys/block/" + str(device) + "/*"):
Severity: Major
Found in noma/usb.py and 1 other location - About 5 hrs to fix
noma/usb.py on lines 154..162

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def sd_partitions():
    """list sd partitions"""
    partitions = []
    for device in sd_devs():
        for partition in glob.glob("/sys/block/" + str(device) + "/*"):
Severity: Major
Found in noma/usb.py and 1 other location - About 5 hrs to fix
noma/usb.py on lines 143..151

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function usb_setup has a Cognitive Complexity of 36 (exceeds 5 allowed). Consider refactoring.
Open

def usb_setup():
    """Perform setup on three usb devices"""
    largest = usb.largest_partition()
    medium = usb.medium_partition()
    smallest = usb.smallest_partition()
Severity: Minor
Found in noma/install.py - About 5 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

File install.py has 378 lines of code (exceeds 250 allowed). Consider refactoring.
Open

"""
Node installation related functionality
"""
from pathlib import Path
import shutil
Severity: Minor
Found in noma/install.py - About 5 hrs to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    def usb_devs():
    """list usb devices"""
    devices = []
    for device in glob.glob("/sys/block/*"):
        for pattern in USB_DEV_PATTERN:
    Severity: Major
    Found in noma/usb.py and 1 other location - About 3 hrs to fix
    noma/usb.py on lines 133..140

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 70.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    def sd_devs():
    """list sd devices"""
    devices = []
    for device in glob.glob("/sys/block/*"):
        for pattern in SD_DEV_PATTERN:
    Severity: Major
    Found in noma/usb.py and 1 other location - About 3 hrs to fix
    noma/usb.py on lines 123..130

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 70.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    File lnd.py has 282 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    """
LND related functionality
"""
import pathlib
from subprocess import call, run
    Severity: Minor
    Found in noma/lnd.py - About 2 hrs to fix

      Cyclomatic complexity is too high in function check_for_destruction. (10)
      Open

      def check_for_destruction(device, path):
    """Check devices for destruction flag. If so, format with ext4"""
    print("Check devices for destruction flag")
    destroy = Path(path + "/DESTROY_ALL_DATA_ON_THIS_DEVICE/").is_dir()
    if destroy:
      Severity: Minor
      Found in noma/install.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in function create_swap. (10)
      Open

      def create_swap():
    """Create swap on volatile usb device"""
    import psutil

    # TODO: make sure dd runs in foreground and is blocking
      Severity: Minor
      Found in noma/install.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Function create_swap has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring.
      Open

      def create_swap():
    """Create swap on volatile usb device"""
    import psutil

    # TODO: make sure dd runs in foreground and is blocking
      Severity: Minor
      Found in noma/install.py - About 2 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Cyclomatic complexity is too high in function set_kv. (8)
      Open

      def set_kv(key, value, config_path):
    """
    Set key to value in path
    kv pairs are separated by "="
      Severity: Minor
      Found in noma/bitcoind.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Function check_for_destruction has a Cognitive Complexity of 16 (exceeds 5 allowed). Consider refactoring.
      Open

      def check_for_destruction(device, path):
    """Check devices for destruction flag. If so, format with ext4"""
    print("Check devices for destruction flag")
    destroy = Path(path + "/DESTROY_ALL_DATA_ON_THIS_DEVICE/").is_dir()
    if destroy:
      Severity: Minor
      Found in noma/install.py - About 2 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      File bitcoind.py has 252 lines of code (exceeds 250 allowed). Consider refactoring.
      Open

      """
bitcoind related functionality
"""
from subprocess import call, run, PIPE, STDOUT, DEVNULL
import os
      Severity: Minor
      Found in noma/bitcoind.py - About 2 hrs to fix

        Cyclomatic complexity is too high in function check. (7)
        Open

        def check():
    """check box filesystem structure"""
    # TODO: only print when logging is enabled

    media_exists = bool(cfg.MEDIA_PATH.is_dir())
        Severity: Minor
        Found in noma/node.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in function lnd_fn. (7)
        Open

        def lnd_fn(args):
    """
    lnd related functionality
    """
    if args["create"]:
        Severity: Minor
        Found in noma/noma.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in function is_running. (7)
        Open

        def is_running(node=""):
    """Check if container is running

    :return bool: container is running"""
    from docker import from_env
        Severity: Minor
        Found in noma/node.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in function fastsync. (7)
        Open

        def fastsync():
    """
    Download blocks and chainstate snapshot

    :return bool: success status
        Severity: Minor
        Found in noma/bitcoind.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Severity
        Category
        Status
        Source
        Language