lujanfernaud/prevy

This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Methods is a special case of LargeClass.

Example

Given this configuration

TooManyMethods:
  max_methods: 3

and this code:

class TooManyMethods
  def one; end
  def two; end
  def three; end
  def four; end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:TooManyMethods has at least 4 methods (TooManyMethods)

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

This cop checks the indentation of the first element in an array literal where the opening bracket and the first element are on separate lines. The other elements' indentations are handled by the AlignArray cop.

By default, array literals that are arguments in a method call with parentheses, and where the opening square bracket of the array is on the same line as the opening parenthesis of the method call, shall have their first element indented one step (two spaces) more than the position inside the opening parenthesis.

Other array literals shall have their first element indented one step more than the start of the line where the opening square bracket is.

This default style is called 'specialinsideparentheses'. Alternative styles are 'consistent' and 'align_brackets'. Here are examples:

Example: EnforcedStyle: specialinsideparentheses (default)

# The `special_inside_parentheses` style enforces that the first
# element in an array literal where the opening bracket and first
# element are on seprate lines is indented one step (two spaces) more
# than the position inside the opening parenthesis.

#bad
array = [
  :value
]
and_in_a_method_call([
  :no_difference
                     ])

#good
array = [
  :value
]
but_in_a_method_call([
                       :its_like_this
                     ])

Example: EnforcedStyle: consistent

# The `consistent` style enforces that the first element in an array
# literal where the opening bracket and the first element are on
# seprate lines is indented the same as an array literal which is not
# defined inside a method call.

#bad
# consistent
array = [
  :value
]
but_in_a_method_call([
                       :its_like_this
])

#good
array = [
  :value
]
and_in_a_method_call([
  :no_difference
])

Example: EnforcedStyle: align_brackets

# The `align_brackets` style enforces that the opening and closing
# brackets are indented to the same position.

#bad
# align_brackets
and_now_for_something = [
                          :completely_different
]

#good
# align_brackets
and_now_for_something = [
                          :completely_different
                        ]

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks the . position in multi-line method calls.

Example: EnforcedStyle: leading (default)

# bad
something.
  mehod

# good
something
  .method

Example: EnforcedStyle: trailing

# bad
something
  .method

# good
something.
  mehod

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks the . position in multi-line method calls.

Example: EnforcedStyle: leading (default)

# bad
something.
  mehod

# good
something
  .method

Example: EnforcedStyle: trailing

# bad
something
  .method

# good
something.
  mehod

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cops checks for inconsistent indentation.

Example:

class A
  def test
    puts 'hello'
     puts 'world'
  end
end

This cop checks the . position in multi-line method calls.

Example: EnforcedStyle: leading (default)

# bad
something.
  mehod

# good
something
  .method

Example: EnforcedStyle: trailing

# bad
something
  .method

# good
something.
  mehod

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]