Method has too many lines. [11/10] Open
def destroy
@membership_request = find_membership_request
@user = @membership_request.user
@group = @membership_request.group
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Groups::MembershipRequestsController#destroy has approx 8 statements Open
def destroy
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Groups::MembershipRequestsController assumes too much for instance variable '@membership_request' Open
class Groups::MembershipRequestsController < ApplicationController
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Groups::MembershipRequestsController assumes too much for instance variable '@group' Open
class Groups::MembershipRequestsController < ApplicationController
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Groups::MembershipRequestsController has no descriptive comment Open
class Groups::MembershipRequestsController < ApplicationController
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Groups::MembershipRequestsController assumes too much for instance variable '@user' Open
class Groups::MembershipRequestsController < ApplicationController
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Use nested module/class definitions instead of compact style. Open
class Groups::MembershipRequestsController < ApplicationController
- Read upRead up
- Exclude checks
This cop checks the style of children definitions at classes and modules. Basically there are two different styles:
Example: EnforcedStyle: nested (default)
# good
# have each child on its own line
class Foo
class Bar
end
end
Example: EnforcedStyle: compact
# good
# combine definitions as much as possible
class Foo::Bar
end
The compact style is only forced for classes/modules with one child.
Inconsistent indentation detected. Open
def find_membership_request
MembershipRequest.find(params[:id])
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
flash[:success] = "Your membership request has been deleted."
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Inconsistent indentation detected. Open
def requester_is_current_user?
current_user == @user
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
flash[:success] = "Your request has been sent. " \
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
flash[:success] = "The membership request has been deleted."
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Inconsistent indentation detected. Open
def user_not_authorized
redirect_to new_user_registration_path
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def notify_group_owner
NewMembershipRequestNotifier.call(@membership_request)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def membership_request_params
params.require(:membership_request)
.permit(:message)
.merge(user: current_user, group: @group)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Use %i
or %I
for an array of symbols. Open
before_action :find_group, only: [:new, :create]
- Read upRead up
- Exclude checks
This cop can check for array literals made up of symbols that are not using the %i() syntax.
Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.
Configuration option: MinSize
If set, arrays with fewer elements than this value will not trigger the
cop. For example, a MinSize of
3` will not enforce a style on an array
of 2 or fewer elements.
Example: EnforcedStyle: percent (default)
# good
%i[foo bar baz]
# bad
[:foo, :bar, :baz]
Example: EnforcedStyle: brackets
# good
[:foo, :bar, :baz]
# bad
%i[foo bar baz]
Inconsistent indentation detected. Open
def flash_deletion_message_to_requester
flash[:success] = "Your membership request has been deleted."
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def notify_requester
return if @group.sample_group?
DeclinedMembershipRequestNotifier.call(@membership_request)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def flash_deletion_message_to_group_owner
flash[:success] = "The membership request has been deleted."
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Missing top-level class documentation comment. Open
class Groups::MembershipRequestsController < ApplicationController
- Read upRead up
- Exclude checks
This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.
The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.
Example:
# bad
class Person
# ...
end
# good
# Description/Explanation of Person class
class Person
# ...
end
Inconsistent indentation detected. Open
def find_group
@group = Group.find(params[:group_id])
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def flash_creation_message_to_requester
flash[:success] = "Your request has been sent. " \
"You'll be notified when there's any change."
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end