Groups::RolesController#create has approx 6 statements Open
def create
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Groups::RolesController#destroy has approx 6 statements Open
def destroy
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Groups::RolesController has at least 5 instance variables Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
Too Many Instance Variables
is a special case of LargeClass
.
Example
Given this configuration
TooManyInstanceVariables:
max_instance_variables: 3
and this code:
class TooManyInstanceVariables
def initialize
@arg_1 = :dummy
@arg_2 = :dummy
@arg_3 = :dummy
@arg_4 = :dummy
end
end
Reek would emit the following warning:
test.rb -- 5 warnings:
[1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)
Groups::RolesController assumes too much for instance variable '@user' Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Groups::RolesController assumes too much for instance variable '@role' Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Groups::RolesController assumes too much for instance variable '@group' Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Groups::RolesController has no descriptive comment Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Missing top-level class documentation comment. Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.
The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.
Example:
# bad
class Person
# ...
end
# good
# Description/Explanation of Person class
class Person
# ...
end
Inconsistent indentation detected. Open
def find_role
params[:role]
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def notify_user_with_new_role
return if @group.sample_group?
NewGroupRoleNotifier.call(user: @user, group: @group, role: @role)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Use nested module/class definitions instead of compact style. Open
class Groups::RolesController < ApplicationController
- Read upRead up
- Exclude checks
This cop checks the style of children definitions at classes and modules. Basically there are two different styles:
Example: EnforcedStyle: nested (default)
# good
# have each child on its own line
class Foo
class Bar
end
end
Example: EnforcedStyle: compact
# good
# combine definitions as much as possible
class Foo::Bar
end
The compact style is only forced for classes/modules with one child.
Inconsistent indentation detected. Open
def find_group
@group = Group.find(params[:group_id])
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def add_role_to_user
GroupRoleAdder.call(@group, @user, @role)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def remove_role_from_user
GroupRoleRemover.call(@group, @user, @role)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def find_organizers_and_moderators
OrganizersAndModeratorsQuery.call(@group)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def notify_user_with_removed_role
return if @group.sample_group?
RemovedGroupRoleNotifier.call(user: @user, group: @group, role: @role)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end
Inconsistent indentation detected. Open
def find_members
User.with_role(:member, @group).order(:name)
end
- Read upRead up
- Exclude checks
This cops checks for inconsistent indentation.
Example:
class A
def test
puts 'hello'
puts 'world'
end
end