Function updatePerms
has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method updatePerms
has 55 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
Method checkRight
has 5 arguments (exceeds 4 allowed). Consider refactoring. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
The method updatePerms() has an NPath complexity of 729. The configured NPath complexity threshold is 200. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
NPathComplexity
Since: 0.1
The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.
Example
class Foo {
function bar() {
// lots of complicated code
}
}
Source https://phpmd.org/rules/codesize.html#npathcomplexity
The method updatePerms() has a Cyclomatic Complexity of 13. The configured cyclomatic complexity threshold is 10. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Missing class import via use statement (line '97', column '32'). Open
$criteria->add(new Criteria('gperm_itemid', $cid));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '86', column '32'). Open
$criteria->add(new Criteria('gperm_itemid', $cid));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '96', column '41'). Open
$criteria = $criteria = new CriteriaCompo();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '89', column '32'). Open
$criteria->add(new Criteria('gperm_groupid', '(' . implode(', ', $groups1_delete) . ')', 'IN'));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '85', column '41'). Open
$criteria = $criteria = new CriteriaCompo();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '98', column '32'). Open
$criteria->add(new Criteria('gperm_modid', $module_id));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '99', column '32'). Open
$criteria->add(new Criteria('gperm_name', 'alumni_premium', '='));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '76', column '32'). Open
$criteria->add(new Criteria('gperm_modid', $module_id));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '75', column '32'). Open
$criteria->add(new Criteria('gperm_itemid', $cid));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '87', column '32'). Open
$criteria->add(new Criteria('gperm_modid', $module_id));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
The method checkRight has a boolean flag argument $trueifadmin, which is a certain sign of a Single Responsibility Principle violation. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
Missing class import via use statement (line '74', column '41'). Open
$criteria = $criteria = new CriteriaCompo();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '77', column '32'). Open
$criteria->add(new Criteria('gperm_name', 'alumni_view', '='));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '78', column '32'). Open
$criteria->add(new Criteria('gperm_groupid', '(' . implode(', ', $groups_delete) . ')', 'IN'));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '88', column '32'). Open
$criteria->add(new Criteria('gperm_name', 'alumni_submit', '='));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '100', column '32'). Open
$criteria->add(new Criteria('gperm_groupid', '(' . implode(', ', $groups2_delete) . ')', 'IN'));
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Similar blocks of code found in 3 locations. Consider refactoring. Open
if (0 != count($groups1_delete)) {
$criteria = $criteria = new CriteriaCompo();
$criteria->add(new Criteria('gperm_itemid', $cid));
$criteria->add(new Criteria('gperm_modid', $module_id));
$criteria->add(new Criteria('gperm_name', 'alumni_submit', '='));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 143.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
if (0 != count($groups_delete)) {
$criteria = $criteria = new CriteriaCompo();
$criteria->add(new Criteria('gperm_itemid', $cid));
$criteria->add(new Criteria('gperm_modid', $module_id));
$criteria->add(new Criteria('gperm_name', 'alumni_view', '='));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 143.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
if (0 != count($groups2_delete)) {
$criteria = $criteria = new CriteriaCompo();
$criteria->add(new Criteria('gperm_itemid', $cid));
$criteria->add(new Criteria('gperm_modid', $module_id));
$criteria->add(new Criteria('gperm_name', 'alumni_premium', '='));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 143.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Each class must be in a namespace of at least one level (a top-level vendor name) Open
class AlumniGroupPermHandler extends XoopsGroupPermHandler
- Exclude checks
The parameter $gperm_groupid is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseParameterName
Since: 0.2
It is considered best practice to use the camelCase notation to name parameters.
Example
class ClassName {
public function doSomething($user_name) {
}
}
Source
The parameter $gperm_name is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseParameterName
Since: 0.2
It is considered best practice to use the camelCase notation to name parameters.
Example
class ClassName {
public function doSomething($user_name) {
}
}
Source
The parameter $gperm_itemid is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseParameterName
Since: 0.2
It is considered best practice to use the camelCase notation to name parameters.
Example
class ClassName {
public function doSomething($user_name) {
}
}
Source
The parameter $gperm_modid is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseParameterName
Since: 0.2
It is considered best practice to use the camelCase notation to name parameters.
Example
class ClassName {
public function doSomething($user_name) {
}
}
Source
A file should declare new symbols (classes, functions, constants, etc.) and cause no other side effects, or it should execute logic with side effects, but should not do both. The first symbol is defined on line 31 and the first side effect is on line 26. Open
<?php
- Exclude checks
The variable $group_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $group_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $gperm_groupid is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $gperm_name is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $group_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $gperm_modid is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $group_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_exists is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $gperm_itemid is not named in camelCase. Open
public function checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid = 1, $trueifadmin = true)
{
return parent::checkRight($gperm_name, $gperm_itemid, $gperm_groupid, $gperm_modid, $trueifadmin);
}
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups1_add is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $group_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $group_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $module_id is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $groups2_delete is not named in camelCase. Open
public function updatePerms($cid, $groups = [])
{
$module_id = Alumni::getInstance()->getModule()->getVar('mid');
$groups_exists = parent::getGroupIds('alumni_view', $cid, $module_id);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}