Showing 2,041 of 3,608 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
models = {
'crs.distribution': {
'Meta': {'object_name': 'Distribution'},
'distribution_type': ('django.db.models.fields.TextField', [], {}),
'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 633.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var TimePeriod = function (years, months, days, hours, minutes, seconds, milliseconds) {
var attrs = "years months days hours minutes seconds milliseconds".split(/\s+/);
var gFn = function (attr) {
return function () { - Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 860.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var TimePeriod = function (years, months, days, hours, minutes, seconds, milliseconds) {
var attrs = "years months days hours minutes seconds milliseconds".split(/\s+/);
var gFn = function (attr) {
return function () { - Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 860.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var TimePeriod = function (years, months, days, hours, minutes, seconds, milliseconds) {
var attrs = "years months days hours minutes seconds milliseconds".split(/\s+/);
var gFn = function (attr) {
return function () { - Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 860.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
return true;};Date.validateMillisecond=function(n){return Date._validate(n,0,999,"milliseconds");};Date.validateSecond=function(n){return Date._validate(n,0,59,"seconds");};Date.validateMinute=function(n){return Date._validate(n,0,59,"minutes");};Date.validateHour=function(n){return Date._validate(n,0,23,"hours");};Date.validateDay=function(n,year,month){return Date._validate(n,1,Date.getDaysInMonth(year,month),"days");};Date.validateMonth=function(n){return Date._validate(n,0,11,"months");};Date.validateYear=function(n){return Date._validate(n,1,9999,"seconds");};Date.prototype.set=function(config){var x=config;if(!x.millisecond&&x.millisecond!==0){x.millisecond=-1;}
if(!x.second&&x.second!==0){x.second=-1;}
if(!x.minute&&x.minute!==0){x.minute=-1;}
if(!x.hour&&x.hour!==0){x.hour=-1;}
if(!x.day&&x.day!==0){x.day=-1;}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 778.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
return true;};Date.validateMillisecond=function(n){return Date._validate(n,0,999,"milliseconds");};Date.validateSecond=function(n){return Date._validate(n,0,59,"seconds");};Date.validateMinute=function(n){return Date._validate(n,0,59,"minutes");};Date.validateHour=function(n){return Date._validate(n,0,23,"hours");};Date.validateDay=function(n,year,month){return Date._validate(n,1,Date.getDaysInMonth(year,month),"days");};Date.validateMonth=function(n){return Date._validate(n,0,11,"months");};Date.validateYear=function(n){return Date._validate(n,1,9999,"seconds");};Date.prototype.set=function(config){var x=config;if(!x.millisecond&&x.millisecond!==0){x.millisecond=-1;}
if(!x.second&&x.second!==0){x.second=-1;}
if(!x.minute&&x.minute!==0){x.minute=-1;}
if(!x.hour&&x.hour!==0){x.hour=-1;}
if(!x.day&&x.day!==0){x.day=-1;}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 778.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
return true;};Date.validateMillisecond=function(n){return Date._validate(n,0,999,"milliseconds");};Date.validateSecond=function(n){return Date._validate(n,0,59,"seconds");};Date.validateMinute=function(n){return Date._validate(n,0,59,"minutes");};Date.validateHour=function(n){return Date._validate(n,0,23,"hours");};Date.validateDay=function(n,year,month){return Date._validate(n,1,Date.getDaysInMonth(year,month),"days");};Date.validateMonth=function(n){return Date._validate(n,0,11,"months");};Date.validateYear=function(n){return Date._validate(n,1,9999,"seconds");};Date.prototype.set=function(config){var x=config;if(!x.millisecond&&x.millisecond!==0){x.millisecond=-1;}
if(!x.second&&x.second!==0){x.second=-1;}
if(!x.minute&&x.minute!==0){x.minute=-1;}
if(!x.hour&&x.hour!==0){x.hour=-1;}
if(!x.day&&x.day!==0){x.day=-1;}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 778.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
models = {
'activitylog.useractivitylog': {
'Meta': {'object_name': 'UserActivityLog'},
'user': ('django.db.models.fields.related.ForeignKey', [], {'to': "orm['auth.User']", 'null': 'True'}),
'organization': ('django.db.models.fields.CharField', [], {'max_length': '40'}),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 391.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
models = {
'sent_message.pollinfo': {
'Meta': {'object_name': 'PollInfo'},
'user': ('django.db.models.fields.related.ForeignKey', [], {'to': "orm['auth.User']", 'null': 'True'}),
'organization': ('django.db.models.fields.CharField', [], {'max_length': '40'}),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 391.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
self.activate_poll = function() {
data = {
'end_date': self.endDate().getFullYear() + "-" + (self.endDate().getMonth()+1) + "-" + self.endDate().getDate() + END_TIME
};
$.blockUI({ message: '<h1><img src="/media/images/ajax-loader.gif"/><span class="loading">' + gettext("Just a moment") + '...</span></h1>', css: { width: '275px'}});- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 624.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
self.edit_poll = function() {
data = {
'end_date': self.endDate().getFullYear() + "-" + (self.endDate().getMonth()+1) + "-" + self.endDate().getDate() + END_TIME
};
$.blockUI({ message: '<h1><img src="/media/images/ajax-loader.gif"/><span class="loading">' + gettext("Just a moment") + '...</span></h1>', css: { width: '275px'}});- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 624.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
return w;};Date.prototype.isDST=function(){return this.toString().match(/(E|C|M|P)(S|D)T/)[2]=="D";};Date.prototype.getTimezone=function(){return Date.getTimezoneAbbreviation(this.getUTCOffset,this.isDST());};Date.prototype.setTimezoneOffset=function(s){var here=this.getTimezoneOffset(),there=Number(s)*-6/10;this.addMinutes(there-here);return this;};Date.prototype.setTimezone=function(s){return this.setTimezoneOffset(Date.getTimezoneOffset(s));};Date.prototype.getUTCOffset=function(){var n=this.getTimezoneOffset()*-10/6,r;if(n<0){r=(n-10000).toString();return r[0]+r.substr(2);}else{r=(n+10000).toString();return"+"+r.substr(1);}};Date.prototype.getDayName=function(abbrev){return abbrev?Date.CultureInfo.abbreviatedDayNames[this.getDay()]:Date.CultureInfo.dayNames[this.getDay()];};Date.prototype.getMonthName=function(abbrev){return abbrev?Date.CultureInfo.abbreviatedMonthNames[this.getMonth()]:Date.CultureInfo.monthNames[this.getMonth()];};Date.prototype._toString=Date.prototype.toString;Date.prototype.toString=function(format){var self=this;var p=function p(s){return(s.toString().length==1)?"0"+s:s;};return format?format.replace(/dd?d?d?|MM?M?M?|yy?y?y?|hh?|HH?|mm?|ss?|tt?|zz?z?/g,function(format){switch(format){case"hh":return p(self.getHours()<13?self.getHours():(self.getHours()-12));case"h":return self.getHours()<13?self.getHours():(self.getHours()-12);case"HH":return p(self.getHours());case"H":return self.getHours();case"mm":return p(self.getMinutes());case"m":return self.getMinutes();case"ss":return p(self.getSeconds());case"s":return self.getSeconds();case"yyyy":return self.getFullYear();case"yy":return self.getFullYear().toString().substring(2,4);case"dddd":return self.getDayName();case"ddd":return self.getDayName(true);case"dd":return p(self.getDate());case"d":return self.getDate().toString();case"MMMM":return self.getMonthName();case"MMM":return self.getMonthName(true);case"MM":return p((self.getMonth()+1));case"M":return self.getMonth()+1;case"t":return self.getHours()<12?Date.CultureInfo.amDesignator.substring(0,1):Date.CultureInfo.pmDesignator.substring(0,1);case"tt":return self.getHours()<12?Date.CultureInfo.amDesignator:Date.CultureInfo.pmDesignator;case"zzz":case"zz":case"z":return"";}}):this._toString();};- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 584.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
return w;};Date.prototype.isDST=function(){return this.toString().match(/(E|C|M|P)(S|D)T/)[2]=="D";};Date.prototype.getTimezone=function(){return Date.getTimezoneAbbreviation(this.getUTCOffset,this.isDST());};Date.prototype.setTimezoneOffset=function(s){var here=this.getTimezoneOffset(),there=Number(s)*-6/10;this.addMinutes(there-here);return this;};Date.prototype.setTimezone=function(s){return this.setTimezoneOffset(Date.getTimezoneOffset(s));};Date.prototype.getUTCOffset=function(){var n=this.getTimezoneOffset()*-10/6,r;if(n<0){r=(n-10000).toString();return r[0]+r.substr(2);}else{r=(n+10000).toString();return"+"+r.substr(1);}};Date.prototype.getDayName=function(abbrev){return abbrev?Date.CultureInfo.abbreviatedDayNames[this.getDay()]:Date.CultureInfo.dayNames[this.getDay()];};Date.prototype.getMonthName=function(abbrev){return abbrev?Date.CultureInfo.abbreviatedMonthNames[this.getMonth()]:Date.CultureInfo.monthNames[this.getMonth()];};Date.prototype._toString=Date.prototype.toString;Date.prototype.toString=function(format){var self=this;var p=function p(s){return(s.toString().length==1)?"0"+s:s;};return format?format.replace(/dd?d?d?|MM?M?M?|yy?y?y?|hh?|HH?|mm?|ss?|tt?|zz?z?/g,function(format){switch(format){case"hh":return p(self.getHours()<13?self.getHours():(self.getHours()-12));case"h":return self.getHours()<13?self.getHours():(self.getHours()-12);case"HH":return p(self.getHours());case"H":return self.getHours();case"mm":return p(self.getMinutes());case"m":return self.getMinutes();case"ss":return p(self.getSeconds());case"s":return self.getSeconds();case"yyyy":return self.getFullYear();case"yy":return self.getFullYear().toString().substring(2,4);case"dddd":return self.getDayName();case"ddd":return self.getDayName(true);case"dd":return p(self.getDate());case"d":return self.getDate().toString();case"MMMM":return self.getMonthName();case"MMM":return self.getMonthName(true);case"MM":return p((self.getMonth()+1));case"M":return self.getMonth()+1;case"t":return self.getHours()<12?Date.CultureInfo.amDesignator.substring(0,1):Date.CultureInfo.pmDesignator.substring(0,1);case"tt":return self.getHours()<12?Date.CultureInfo.amDesignator:Date.CultureInfo.pmDesignator;case"zzz":case"zz":case"z":return"";}}):this._toString();};- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 584.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
return w;};Date.prototype.isDST=function(){return this.toString().match(/(E|C|M|P)(S|D)T/)[2]=="D";};Date.prototype.getTimezone=function(){return Date.getTimezoneAbbreviation(this.getUTCOffset,this.isDST());};Date.prototype.setTimezoneOffset=function(s){var here=this.getTimezoneOffset(),there=Number(s)*-6/10;this.addMinutes(there-here);return this;};Date.prototype.setTimezone=function(s){return this.setTimezoneOffset(Date.getTimezoneOffset(s));};Date.prototype.getUTCOffset=function(){var n=this.getTimezoneOffset()*-10/6,r;if(n<0){r=(n-10000).toString();return r[0]+r.substr(2);}else{r=(n+10000).toString();return"+"+r.substr(1);}};Date.prototype.getDayName=function(abbrev){return abbrev?Date.CultureInfo.abbreviatedDayNames[this.getDay()]:Date.CultureInfo.dayNames[this.getDay()];};Date.prototype.getMonthName=function(abbrev){return abbrev?Date.CultureInfo.abbreviatedMonthNames[this.getMonth()]:Date.CultureInfo.monthNames[this.getMonth()];};Date.prototype._toString=Date.prototype.toString;Date.prototype.toString=function(format){var self=this;var p=function p(s){return(s.toString().length==1)?"0"+s:s;};return format?format.replace(/dd?d?d?|MM?M?M?|yy?y?y?|hh?|HH?|mm?|ss?|tt?|zz?z?/g,function(format){switch(format){case"hh":return p(self.getHours()<13?self.getHours():(self.getHours()-12));case"h":return self.getHours()<13?self.getHours():(self.getHours()-12);case"HH":return p(self.getHours());case"H":return self.getHours();case"mm":return p(self.getMinutes());case"m":return self.getMinutes();case"ss":return p(self.getSeconds());case"s":return self.getSeconds();case"yyyy":return self.getFullYear();case"yy":return self.getFullYear().toString().substring(2,4);case"dddd":return self.getDayName();case"ddd":return self.getDayName(true);case"dd":return p(self.getDate());case"d":return self.getDate().toString();case"MMMM":return self.getMonthName();case"MMM":return self.getMonthName(true);case"MM":return p((self.getMonth()+1));case"M":return self.getMonth()+1;case"t":return self.getHours()<12?Date.CultureInfo.amDesignator.substring(0,1):Date.CultureInfo.pmDesignator.substring(0,1);case"tt":return self.getHours()<12?Date.CultureInfo.amDesignator:Date.CultureInfo.pmDesignator;case"zzz":case"zz":case"z":return"";}}):this._toString();};- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 584.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
Date.now=function(){return new Date();};Date.today=function(){return Date.now().clearTime();};Date.prototype._orient=+1;Date.prototype.next=function(){this._orient=+1;return this;};Date.prototype.last=Date.prototype.prev=Date.prototype.previous=function(){this._orient=-1;return this;};Date.prototype._is=false;Date.prototype.is=function(){this._is=true;return this;};Number.prototype._dateElement="day";Number.prototype.fromNow=function(){var c={};c[this._dateElement]=this;return Date.now().add(c);};Number.prototype.ago=function(){var c={};c[this._dateElement]=this*-1;return Date.now().add(c);};(function(){var $D=Date.prototype,$N=Number.prototype;var dx=("sunday monday tuesday wednesday thursday friday saturday").split(/\s/),mx=("january february march april may june july august september october november december").split(/\s/),px=("Millisecond Second Minute Hour Day Week Month Year").split(/\s/),de;var df=function(n){return function(){if(this._is){this._is=false;return this.getDay()==n;}
return this.moveToDayOfWeek(n,this._orient);};};for(var i=0;i<dx.length;i++){$D[dx[i]]=$D[dx[i].substring(0,3)]=df(i);}
var mf=function(n){return function(){if(this._is){this._is=false;return this.getMonth()===n;}
return this.moveToMonth(n,this._orient);};};for(var j=0;j<mx.length;j++){$D[mx[j]]=$D[mx[j].substring(0,3)]=mf(j);}
var ef=function(j){return function(){if(j.substring(j.length-1)!="s"){j+="s";}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 567.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
Date.now=function(){return new Date();};Date.today=function(){return Date.now().clearTime();};Date.prototype._orient=+1;Date.prototype.next=function(){this._orient=+1;return this;};Date.prototype.last=Date.prototype.prev=Date.prototype.previous=function(){this._orient=-1;return this;};Date.prototype._is=false;Date.prototype.is=function(){this._is=true;return this;};Number.prototype._dateElement="day";Number.prototype.fromNow=function(){var c={};c[this._dateElement]=this;return Date.now().add(c);};Number.prototype.ago=function(){var c={};c[this._dateElement]=this*-1;return Date.now().add(c);};(function(){var $D=Date.prototype,$N=Number.prototype;var dx=("sunday monday tuesday wednesday thursday friday saturday").split(/\s/),mx=("january february march april may june july august september october november december").split(/\s/),px=("Millisecond Second Minute Hour Day Week Month Year").split(/\s/),de;var df=function(n){return function(){if(this._is){this._is=false;return this.getDay()==n;}
return this.moveToDayOfWeek(n,this._orient);};};for(var i=0;i<dx.length;i++){$D[dx[i]]=$D[dx[i].substring(0,3)]=df(i);}
var mf=function(n){return function(){if(this._is){this._is=false;return this.getMonth()===n;}
return this.moveToMonth(n,this._orient);};};for(var j=0;j<mx.length;j++){$D[mx[j]]=$D[mx[j].substring(0,3)]=mf(j);}
var ef=function(j){return function(){if(j.substring(j.length-1)!="s"){j+="s";}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 567.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
Date.now=function(){return new Date();};Date.today=function(){return Date.now().clearTime();};Date.prototype._orient=+1;Date.prototype.next=function(){this._orient=+1;return this;};Date.prototype.last=Date.prototype.prev=Date.prototype.previous=function(){this._orient=-1;return this;};Date.prototype._is=false;Date.prototype.is=function(){this._is=true;return this;};Number.prototype._dateElement="day";Number.prototype.fromNow=function(){var c={};c[this._dateElement]=this;return Date.now().add(c);};Number.prototype.ago=function(){var c={};c[this._dateElement]=this*-1;return Date.now().add(c);};(function(){var $D=Date.prototype,$N=Number.prototype;var dx=("sunday monday tuesday wednesday thursday friday saturday").split(/\s/),mx=("january february march april may june july august september october november december").split(/\s/),px=("Millisecond Second Minute Hour Day Week Month Year").split(/\s/),de;var df=function(n){return function(){if(this._is){this._is=false;return this.getDay()==n;}
return this.moveToDayOfWeek(n,this._orient);};};for(var i=0;i<dx.length;i++){$D[dx[i]]=$D[dx[i].substring(0,3)]=df(i);}
var mf=function(n){return function(){if(this._is){this._is=false;return this.getMonth()===n;}
return this.moveToMonth(n,this._orient);};};for(var j=0;j<mx.length;j++){$D[mx[j]]=$D[mx[j].substring(0,3)]=mf(j);}
var ef=function(j){return function(){if(j.substring(j.length-1)!="s"){j+="s";}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 567.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
class OrganizationChangeList(ChangeList):
def get_query_set(self):
if not self.params.get("q", ""):
return super(OrganizationChangeList, self).get_query_set()
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 334.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
class OrganizationChangeList(ChangeList):
def get_query_set(self):
if not self.params.get("q", ""):
return super(OrganizationChangeList, self).get_query_set()
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 334.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
switch (type.toLowerCase()) {
case "week":
regex = /^(\d{4})-W(\d{2})$/;
valMatches = val.match(regex);
if (valMatches === null) {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 498.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76