Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

NPathComplexity

Since: 0.1

The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.

Example

class Foo {
    function bar() {
        // lots of complicated code
    }
}

Source https://phpmd.org/rules/codesize.html#npathcomplexity

CyclomaticComplexity

Since: 0.1

Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.

Example

// Cyclomatic Complexity = 11
class Foo {
1   public function example() {
2       if ($a == $b) {
3           if ($a1 == $b1) {
                fiddle();
4           } elseif ($a2 == $b2) {
                fiddle();
            } else {
                fiddle();
            }
5       } elseif ($c == $d) {
6           while ($c == $d) {
                fiddle();
            }
7        } elseif ($e == $f) {
8           for ($n = 0; $n < $h; $n++) {
                fiddle();
            }
        } else {
            switch ($z) {
9               case 1:
                    fiddle();
                    break;
10              case 2:
                    fiddle();
                    break;
11              case 3:
                    fiddle();
                    break;
                default:
                    fiddle();
                    break;
            }
        }
    }
}

Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ExitExpression

Since: 0.2

An exit-expression within regular code is untestable and therefore it should be avoided. Consider to move the exit-expression into some kind of startup script where an error/exception code is returned to the calling environment.

Example

class Foo {
    public function bar($param)  {
        if ($param === 42) {
            exit(23);
        }
    }
}

Source https://phpmd.org/rules/design.html#exitexpression

EmptyCatchBlock

Since: 2.7.0

Usually empty try-catch is a bad idea because you are silently swallowing an error condition and then continuing execution. Occasionally this may be the right thing to do, but often it's a sign that a developer saw an exception, didn't know what to do about it, and so used an empty catch to silence the problem.

Example

class Foo {

  public function bar()
  {
      try {
          // ...
      } catch (Exception $e) {} // empty catch block
  }
}

Source https://phpmd.org/rules/design.html#emptycatchblock