Sign upLogin

markusbohl/fluent-ts-validator

View on GitHub
Star

Showing 319 of 319 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("HasMinNumberOfElementsValidator", () => {
    let validator: HasMinNumberOfElementsValidator;

    beforeEach(() => {
        validator = new HasMinNumberOfElementsValidator(2);
Severity: Major
Found in src/validators/collection-based/HasMinNumberOfElementsValidator.spec.ts and 2 other locations - About 5 days to fix
src/validators/collection-based/HasMaxNumberOfElementsValidator.spec.ts on lines 3..122
src/validators/collection-based/HasNumberOfElementsValidator.spec.ts on lines 3..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 844.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("HasMaxNumberOfElementsValidator", () => {
    let validator: HasMaxNumberOfElementsValidator;

    beforeEach(() => {
        validator = new HasMaxNumberOfElementsValidator(2);
Severity: Major
Found in src/validators/collection-based/HasMaxNumberOfElementsValidator.spec.ts and 2 other locations - About 5 days to fix
src/validators/collection-based/HasMinNumberOfElementsValidator.spec.ts on lines 3..122
src/validators/collection-based/HasNumberOfElementsValidator.spec.ts on lines 3..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 844.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("HasNumberOfElementsValidator", () => {
    let validator: HasNumberOfElementsValidator;

    beforeEach(() => {
        validator = new HasNumberOfElementsValidator(2);
Severity: Major
Found in src/validators/collection-based/HasNumberOfElementsValidator.spec.ts and 2 other locations - About 5 days to fix
src/validators/collection-based/HasMaxNumberOfElementsValidator.spec.ts on lines 3..122
src/validators/collection-based/HasMinNumberOfElementsValidator.spec.ts on lines 3..122

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 844.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("IsEmptyValidator", () => {
    let validator: IsEmptyValidator;

    beforeEach(() => {
        validator = new IsEmptyValidator();
Severity: Major
Found in src/validators/collection-based/IsEmptyValidator.spec.ts and 1 other location - About 3 days to fix
src/validators/collection-based/IsNotEmptyValidator.spec.ts on lines 3..92

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 612.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("IsNotEmptyValidator", () => {
    let validator: IsNotEmptyValidator;

    beforeEach(() => {
        validator = new IsNotEmptyValidator();
Severity: Major
Found in src/validators/collection-based/IsNotEmptyValidator.spec.ts and 1 other location - About 3 days to fix
src/validators/collection-based/IsEmptyValidator.spec.ts on lines 3..92

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 612.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        describe("isValid()", () => {
            it("should return false if collection has less than minimum number of elements", () => {
                const result = validator.isValid(aSet);

                expect(result).toBe(false);
Severity: Major
Found in src/validators/collection-based/HasMinMaxNumberOfElementsValidator.spec.ts and 1 other location - About 2 days to fix
src/validators/collection-based/HasMinMaxNumberOfElementsValidator.spec.ts on lines 25..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 382.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        describe("isValid()", () => {
            it("should return false if collection has less than minimum number of elements", () => {
                const result = validator.isValid(anArray);

                expect(result).toBe(false);
Severity: Major
Found in src/validators/collection-based/HasMinMaxNumberOfElementsValidator.spec.ts and 1 other location - About 2 days to fix
src/validators/collection-based/HasMinMaxNumberOfElementsValidator.spec.ts on lines 83..131

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 382.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("WhenNotNullCondition", () => {
    let condition: WhenNotNullCondition<TestClass>;
    let testObject: TestClass;

    beforeEach(() => {
Severity: Major
Found in src/validation/WhenNotNullCondition.spec.ts and 1 other location - About 2 days to fix
src/validation/WhenDefinedCondition.spec.ts on lines 3..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 378.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("WhenDefinedCondition", () => {
    let condition: WhenDefinedCondition<TestClass>;
    let testObject: TestClass;

    beforeEach(() => {
Severity: Major
Found in src/validation/WhenDefinedCondition.spec.ts and 1 other location - About 2 days to fix
src/validation/WhenNotNullCondition.spec.ts on lines 3..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 378.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsSameOrBeforeValidator", () => {
    describe("isValid()", () => {
        let validator: IsSameOrBeforeValidator;
        const date = new Date(2016, 11, 24, 21, 33, 45, 673);
Severity: Major
Found in src/validators/date-based/IsSameOrBeforeValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/date-based/IsSameAsValidator.spec.ts on lines 3..40
src/validators/date-based/IsSameOrAfterValidator.spec.ts on lines 3..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 281.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsSameAsValidator", () => {
    describe("isValid()", () => {
        let validator: IsSameAsValidator;
        const date = new Date(2016, 11, 24, 21, 33, 45, 673);
Severity: Major
Found in src/validators/date-based/IsSameAsValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/date-based/IsSameOrAfterValidator.spec.ts on lines 3..40
src/validators/date-based/IsSameOrBeforeValidator.spec.ts on lines 3..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 281.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsSameOrAfterValidator", () => {
    describe("isValid()", () => {
        let validator: IsSameOrAfterValidator;
        const date = new Date(2016, 11, 24, 21, 33, 45, 673);
Severity: Major
Found in src/validators/date-based/IsSameOrAfterValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/date-based/IsSameAsValidator.spec.ts on lines 3..40
src/validators/date-based/IsSameOrBeforeValidator.spec.ts on lines 3..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 281.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("IsBeforeValidator", () => {
    describe("isValid()", () => {
        let validator: IsBeforeValidator;
        const date = new Date(2016, 11, 24, 21, 33, 45, 673);
Severity: Major
Found in src/validators/date-based/IsBeforeValidator.spec.ts and 1 other location - About 1 day to fix
src/validators/date-based/IsAfterValidator.spec.ts on lines 3..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 271.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("IsAfterValidator", () => {
    describe("isValid()", () => {
        let validator: IsAfterValidator;
        const date = new Date(2016, 11, 24, 21, 33, 45, 673);
Severity: Major
Found in src/validators/date-based/IsAfterValidator.spec.ts and 1 other location - About 1 day to fix
src/validators/date-based/IsBeforeValidator.spec.ts on lines 3..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 271.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsLowercaseValidator", () => {
    let validator: IsLowercaseValidator;

    beforeEach(() => {
        validator = new IsLowercaseValidator();
Severity: Major
Found in src/validators/string-based/IsLowercaseValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/string-based/IsJsonValidator.spec.ts on lines 4..36
src/validators/string-based/IsUppercaseValidator.spec.ts on lines 4..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 264.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsBase64Validator", () => {
    describe("isValid()", () => {
        let validator: IsBase64Validator;

        beforeEach(() => {
Severity: Major
Found in src/validators/string-based/IsBase64Validator.spec.ts and 2 other locations - About 1 day to fix
src/validators/string-based/IsAsciiValidator.spec.ts on lines 4..36
src/validators/string-based/IsCreditCardValidator.spec.ts on lines 5..37

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 264.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsJsonValidator", () => {
    let validator: IsJsonValidator;

    beforeEach(() => {
        validator = new IsJsonValidator();
Severity: Major
Found in src/validators/string-based/IsJsonValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/string-based/IsLowercaseValidator.spec.ts on lines 5..37
src/validators/string-based/IsUppercaseValidator.spec.ts on lines 4..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 264.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsAsciiValidator", () => {
    describe("isValid()", () => {
        let validator: IsAsciiValidator;

        beforeEach(() => {
Severity: Major
Found in src/validators/string-based/IsAsciiValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/string-based/IsBase64Validator.spec.ts on lines 4..35
src/validators/string-based/IsCreditCardValidator.spec.ts on lines 5..37

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 264.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsUppercaseValidator", () => {
    let validator: IsUppercaseValidator;

    beforeEach(() => {
        validator = new IsUppercaseValidator();
Severity: Major
Found in src/validators/string-based/IsUppercaseValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/string-based/IsJsonValidator.spec.ts on lines 4..36
src/validators/string-based/IsLowercaseValidator.spec.ts on lines 5..37

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 264.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe("IsCreditCardValidator", () => {
    describe("isValid()", () => {
        let validator: IsCreditCardValidator;

        beforeEach(() => {
Severity: Major
Found in src/validators/string-based/IsCreditCardValidator.spec.ts and 2 other locations - About 1 day to fix
src/validators/string-based/IsAsciiValidator.spec.ts on lines 4..36
src/validators/string-based/IsBase64Validator.spec.ts on lines 4..35

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 264.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language