metaminded/tabulatr2

This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks for methods with too many parameters. The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count.

This cop checks for use of the lambda.(args) syntax.

Example: EnforcedStyle: call (default)

# bad lambda.(x, y)

# good lambda.call(x, y)

Example: EnforcedStyle: braces

# bad lambda.call(x, y)

# good lambda.(x, y)

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for trailing comma in array and hash literals.

Example: EnforcedStyleForMultiline: consistent_comma

# bad
a = [1, 2,]

# good
a = [
  1, 2,
  3,
]

# good
a = [
  1,
  2,
]

Example: EnforcedStyleForMultiline: comma

# bad
a = [1, 2,]

# good
a = [
  1,
  2,
]

Example: EnforcedStyleForMultiline: no_comma (default)

# bad
a = [1, 2,]

# good
a = [
  1,
  2
]

This cop checks for parentheses in the definition of a method, that does not take any arguments. Both instance and class/singleton methods are checked.

Example:

# bad
def foo()
  # does a thing
end

# good
def foo
  # does a thing
end

# also good
def foo() does_a_thing end

Example:

# bad
def Baz.foo()
  # does a thing
end

# good
def Baz.foo
  # does a thing
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

This cop checks whether method definitions are separated by one empty line.

NumberOfEmptyLines can be and integer (e.g. 1 by default) or an array (e.g. [1, 2]) to specificy a minimum and a maximum of empty lines.

AllowAdjacentOneLineDefs can be used to configure is adjacent one line methods definitions are an offense

Example:

# bad
def a
end
def b
end

Example:

# good
def a
end

def b
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

Checks for empty else-clauses, possibly including comments and/or an explicit nil depending on the EnforcedStyle.

Example: EnforcedStyle: empty

# warn only on empty else

# bad
if condition
  statement
else
end

# good
if condition
  statement
else
  nil
end

# good
if condition
  statement
else
  statement
end

# good
if condition
  statement
end

Example: EnforcedStyle: nil

# warn on else with nil in it

# bad
if condition
  statement
else
  nil
end

# good
if condition
  statement
else
end

# good
if condition
  statement
else
  statement
end

# good
if condition
  statement
end

Example: EnforcedStyle: both (default)

# warn on empty else and else with nil in it

# bad
if condition
  statement
else
  nil
end

# bad
if condition
  statement
else
end

# good
if condition
  statement
else
  statement
end

# good
if condition
  statement
end

This cop enforces the consistent usage of %-literal delimiters.

Specify the 'default' key to set all preferred delimiters at once. You can continue to specify individual preferred delimiters to override the default.

Example:

# Style/PercentLiteralDelimiters:
#   PreferredDelimiters:
#     default: '[]'
#     '%i':    '()'

# good
%w[alpha beta] + %i(gamma delta)

# bad
%W(alpha #{beta})

# bad
%I(alpha beta)

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cops checks if empty lines around the bodies of classes match the configuration.

Example: EnforcedStyle: empty_lines

# good

class Foo

  def bar
    # ...
  end

end

Example: EnforcedStyle: emptylinesexcept_namespace

# good

class Foo
  class Bar

    # ...

  end
end

Example: EnforcedStyle: emptylinesspecial

# good
class Foo

  def bar; end

end

Example: EnforcedStyle: noemptylines (default)

# good

class Foo
  def bar
    # ...
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for uses of rescue in its modifier form.

Example:

# bad
some_method rescue handle_error

# good
begin
  some_method
rescue
  handle_error
end

This cop checks whether method definitions are separated by one empty line.

NumberOfEmptyLines can be and integer (e.g. 1 by default) or an array (e.g. [1, 2]) to specificy a minimum and a maximum of empty lines.

AllowAdjacentOneLineDefs can be used to configure is adjacent one line methods definitions are an offense

Example:

# bad
def a
end
def b
end

Example:

# good
def a
end

def b
end

This cop checks that the closing brace in a method definition is either on the same line as the last method parameter, or a new line.

When using the symmetrical (default) style:

If a method definition's opening brace is on the same line as the first parameter of the definition, then the closing brace should be on the same line as the last parameter of the definition.

If an method definition's opening brace is on the line above the first parameter of the definition, then the closing brace should be on the line below the last parameter of the definition.

When using the new_line style:

The closing brace of a multi-line method definition must be on the line after the last parameter of the definition.

When using the same_line style:

The closing brace of a multi-line method definition must be on the same line as the last parameter of the definition.

Example:

# symmetrical: bad
  # new_line: good
  # same_line: bad
  def foo(a,
    b
  )
  end

  # symmetrical: bad
  # new_line: bad
  # same_line: good
  def foo(
    a,
    b)
  end

  # symmetrical: good
  # new_line: bad
  # same_line: good
  def foo(a,
    b)
  end

  # symmetrical: good
  # new_line: good
  # same_line: bad
  def foo(
    a,
    b
  )
  end

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

This cop checks for unneeded usages of splat expansion

Example:

# bad

a = *[1, 2, 3]
a = *'a'
a = *1

begin
  foo
rescue *[StandardError, ApplicationError]
  bar
end

case foo
when *[1, 2, 3]
  bar
else
  baz
end

Example:

# good

c = [1, 2, 3]
a = *c
a, b = *c
a, *b = *c
a = *1..10
a = ['a']

begin
  foo
rescue StandardError, ApplicationError
  bar
end

case foo
when *[1, 2, 3]
  bar
else
  baz
end

This cop checks the style of children definitions at classes and modules. Basically there are two different styles:

Example: EnforcedStyle: nested (default)

# good
# have each child on its own line
class Foo
  class Bar
  end
end

Example: EnforcedStyle: compact

# good
# combine definitions as much as possible
class Foo::Bar
end

The compact style is only forced for classes/modules with one child.

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks whether method definitions are separated by one empty line.

NumberOfEmptyLines can be and integer (e.g. 1 by default) or an array (e.g. [1, 2]) to specificy a minimum and a maximum of empty lines.

AllowAdjacentOneLineDefs can be used to configure is adjacent one line methods definitions are an offense

Example:

# bad
def a
end
def b
end

Example:

# good
def a
end

def b
end

This cop checks whether method definitions are separated by one empty line.

NumberOfEmptyLines can be and integer (e.g. 1 by default) or an array (e.g. [1, 2]) to specificy a minimum and a maximum of empty lines.

AllowAdjacentOneLineDefs can be used to configure is adjacent one line methods definitions are an offense

Example:

# bad
def a
end
def b
end

Example:

# good
def a
end

def b
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for use of the lambda.(args) syntax.

Example: EnforcedStyle: call (default)

# bad lambda.(x, y)

# good lambda.call(x, y)

Example: EnforcedStyle: braces

# bad lambda.call(x, y)

# good lambda.(x, y)

This cop checks for ambiguous operators in the first argument of a method invocation without parentheses.

Example:

# bad

# The `*` is interpreted as a splat operator but it could possibly be
# a `*` method invocation (i.e. `do_something.*(some_array)`).
do_something *some_array

Example:

# good

# With parentheses, there's no ambiguity.
do_something(*some_array)

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end

This cop checks whether method definitions are separated by one empty line.

NumberOfEmptyLines can be and integer (e.g. 1 by default) or an array (e.g. [1, 2]) to specificy a minimum and a maximum of empty lines.

AllowAdjacentOneLineDefs can be used to configure is adjacent one line methods definitions are an offense

Example:

# bad
def a
end
def b
end

Example:

# good
def a
end

def b
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for single-line method definitions that contain a body. It will accept single-line methods with no body.

Example:

# bad
def some_method; body end
def link_to(url); {:name => url}; end
def @table.columns; super; end

# good
def no_op; end
def self.resource_class=(klass); end
def @table.columns; end