Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).

Example:

# bad
CONST = [1, 2, 3]

# good
CONST = [1, 2, 3].freeze

This cops checks if empty lines around the bodies of classes match the configuration.

Example: EnforcedStyle: empty_lines

# good

class Foo

  def bar
    # ...
  end

end

Example: EnforcedStyle: emptylinesexcept_namespace

# good

class Foo
  class Bar

    # ...

  end
end

Example: EnforcedStyle: emptylinesspecial

# good
class Foo

  def bar; end

end

Example: EnforcedStyle: noemptylines (default)

# good

class Foo
  def bar
    # ...
  end
end

This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).

Example:

# bad
CONST = [1, 2, 3]

# good
CONST = [1, 2, 3].freeze

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]

This cops checks for two or more consecutive blank lines.

Example:

# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method

# good
some_method
# one empty line
some_method

This cop checks for uses of fail and raise.

Example: EnforcedStyle: only_raise (default)

# The `only_raise` style enforces the sole use of `raise`.
# bad
begin
  fail
rescue Exception
  # handle it
end

def watch_out
  fail
rescue Exception
  # handle it
end

Kernel.fail

# good
begin
  raise
rescue Exception
  # handle it
end

def watch_out
  raise
rescue Exception
  # handle it
end

Kernel.raise

Example: EnforcedStyle: only_fail

# The `only_fail` style enforces the sole use of `fail`.
# bad
begin
  raise
rescue Exception
  # handle it
end

def watch_out
  raise
rescue Exception
  # handle it
end

Kernel.raise

# good
begin
  fail
rescue Exception
  # handle it
end

def watch_out
  fail
rescue Exception
  # handle it
end

Kernel.fail

Example: EnforcedStyle: semantic

# The `semantic` style enforces the use of `fail` to signal an
# exception, then will use `raise` to trigger an offense after
# it has been rescued.
# bad
begin
  raise
rescue Exception
  # handle it
end

def watch_out
  # Error thrown
rescue Exception
  fail
end

Kernel.fail
Kernel.raise

# good
begin
  fail
rescue Exception
  # handle it
end

def watch_out
  fail
rescue Exception
  raise 'Preferably with descriptive message'
end

explicit_receiver.fail
explicit_receiver.raise

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]

This cop checks the indentation of the method name part in method calls that span more than one line.

Example: EnforcedStyle: aligned

# bad
while myvariable
.b
  # do something
end

# good
while myvariable
      .b
  # do something
end

# good
Thing.a
     .b
     .c

Example: EnforcedStyle: indented

# good
while myvariable
  .b

  # do something
end

Example: EnforcedStyle: indentedrelativeto_receiver

# good
while myvariable
        .a
        .b

  # do something
end

# good
myvariable = Thing
               .a
               .b
               .c

This cop checks the indentation of the method name part in method calls that span more than one line.

Example: EnforcedStyle: aligned

# bad
while myvariable
.b
  # do something
end

# good
while myvariable
      .b
  # do something
end

# good
Thing.a
     .b
     .c

Example: EnforcedStyle: indented

# good
while myvariable
  .b

  # do something
end

Example: EnforcedStyle: indentedrelativeto_receiver

# good
while myvariable
        .a
        .b

  # do something
end

# good
myvariable = Thing
               .a
               .b
               .c

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]