Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

NPathComplexity

Since: 0.1

The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.

Example

class Foo {
    function bar() {
        // lots of complicated code
    }
}

Source https://phpmd.org/rules/codesize.html#npathcomplexity

CyclomaticComplexity

Since: 0.1

Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.

Example

// Cyclomatic Complexity = 11
class Foo {
1   public function example() {
2       if ($a == $b) {
3           if ($a1 == $b1) {
                fiddle();
4           } elseif ($a2 == $b2) {
                fiddle();
            } else {
                fiddle();
            }
5       } elseif ($c == $d) {
6           while ($c == $d) {
                fiddle();
            }
7        } elseif ($e == $f) {
8           for ($n = 0; $n < $h; $n++) {
                fiddle();
            }
        } else {
            switch ($z) {
9               case 1:
                    fiddle();
                    break;
10              case 2:
                    fiddle();
                    break;
11              case 3:
                    fiddle();
                    break;
                default:
                    fiddle();
                    break;
            }
        }
    }
}

Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 837.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

CamelCaseClassName

Since: 0.2

It is considered best practice to use the CamelCase notation to name classes.

Example

class class_name {
}

Source

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable