Try, Except, Pass detected. Open
except: pass
- Exclude checks
Function __init__
has a Cognitive Complexity of 9 (exceeds 5 allowed). Consider refactoring. Open
def __init__(self, config_keyboards):
self.__OutputMappingTable = {}
self.__keyboards = {}
for keyboard_name in config_keyboards:
logger.info("trying to add keyboard '%s' to handler", keyboard_name)
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
def status_output(self, pin):
for keyboard in self.__keyboards:
if pin.startswith(keyboard+'.'):
return self.__keyboards[keyboard].status_output(pin[len(keyboard+'.'):])
return None
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 67.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def status_input(self, pin):
for keyboard in self.__keyboards:
if pin.startswith(keyboard+'.'):
return self.__keyboards[keyboard].status_input(pin[len(keyboard+'.'):])
return None
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 67.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
@property
def input_pins(self):
return_list = []
for Keyboard in self.__keyboards:
for input_pin in self.__keyboards[Keyboard].input_pins:
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
@property
def output_pins(self):
return_list = []
for Keyboard in self.__keyboards:
for pin in self.__keyboards[Keyboard].output_pins:
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Module level import not at top of file Open
import importlib
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (86 > 79 characters) Open
keyboard = importlib.import_module('doorpi.keyboard.from_'+keyboard_type).get(
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (81 > 79 characters) Open
self.__keyboards[keyboard_name] = load_single_keyboard(keyboard_name)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Continuation line under-indented for visual indent Open
keyboard_name
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Line too long (88 > 79 characters) Open
return self.__keyboards[keyboard].status_output(pin[len(keyboard+'.'):])
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
from doorpi.keyboard.AbstractBaseClass import KeyboardAbstractBaseClass
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (104 > 79 characters) Open
True, store_if_not_exists=store_if_not_exists)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Unexpected spaces around keyword / parameter equals Open
def set_output(self, pin, value, log_output = True):
- Read upRead up
- Exclude checks
Don't use spaces around the '=' sign in function arguments.
Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.
Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):
E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):
Unexpected spaces around keyword / parameter equals Open
config_keyboards = doorpi.DoorPi().config.get_keys(section = 'keyboards')
- Read upRead up
- Exclude checks
Don't use spaces around the '=' sign in function arguments.
Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.
Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):
E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):
Continuation line under-indented for visual indent Open
output_pin_name,
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Unexpected spaces around keyword / parameter equals Open
config_keyboards = doorpi.DoorPi().config.get_keys(section = 'keyboards')
- Read upRead up
- Exclude checks
Don't use spaces around the '=' sign in function arguments.
Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.
Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):
E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):
Line too long (82 > 79 characters) Open
output_pins = doorpi.DoorPi().config.get_keys(conf_pre+'OutputPins'+conf_post)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (86 > 79 characters) Open
output_pins = doorpi.DoorPi().config.get_keys(keyboard_name+'_OutputPins')
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Closing bracket does not match visual indentation Open
)
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Multiple statements on one line (colon) Open
class KeyboardImportError(ImportError): pass
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Line too long (101 > 79 characters) Open
output_pin_name = doorpi.DoorPi().config.get(keyboard_name+'_OutputPins', output_pin)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
import doorpi
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Expected 2 blank lines, found 1 Open
def load_single_keyboard(keyboard_name):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Line too long (90 > 79 characters) Open
store_if_not_exists=store_if_not_exists)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Expected 2 blank lines, found 1 Open
class KeyboardImportError(ImportError): pass
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Multiple statements on one line (colon) Open
except: pass
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Do not use bare 'except' Open
except: pass
- Read upRead up
- Exclude checks
When catching exceptions, mention specific exceptions when possible.
Okay: except Exception:
Okay: except BaseException:
E722: except:
Line too long (109 > 79 characters) Open
raise UnknownOutputPin('outputpin with name %s is unknown %s' % (pin, self.__OutputMappingTable))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (80 > 79 characters) Open
input_pins = doorpi.DoorPi().config.get_keys(conf_pre+'InputPins'+conf_post)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (93 > 79 characters) Open
pressed_on_key_down = doorpi.DoorPi().config.get_bool(section_name, 'pressed_on_keydown',
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (87 > 79 characters) Open
return self.__keyboards[keyboard].status_input(pin[len(keyboard+'.'):])
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
No newline at end of file Open
__del__ = destroy
- Read upRead up
- Exclude checks
Trailing blank lines are superfluous.
Okay: spam(1)
W391: spam(1)\n
However the last line should end with a new line (warning W292).
Line too long (83 > 79 characters) Open
bouncetime = doorpi.DoorPi().config.get_float(section_name, 'bouncetime', 2000,
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (103 > 79 characters) Open
logger.warning('overwriting existing name of outputpin "%s" (exists in %s and %s)',
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Continuation line under-indented for visual indent Open
self.__OutputMappingTable[output_pin_name],
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Expected 2 blank lines, found 1 Open
def load_keyboard():
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Line too long (91 > 79 characters) Open
keyboard_type = doorpi.DoorPi().config.get('keyboards', keyboard_name, 'dummy').lower()
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (113 > 79 characters) Open
logger.exception('keyboard %s not found @ keyboard.from_%s (msg: %s)', keyboard_name, keyboard_type, exp)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (91 > 79 characters) Open
self.__keyboards[self.__OutputMappingTable[pin]].set_output(pin, value, log_output)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Multiple statements on one line (colon) Open
class UnknownOutputPin(Exception): pass
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Line too long (80 > 79 characters) Open
logger.info("trying to add keyboard '%s' to handler", keyboard_name)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Unexpected spaces around keyword / parameter equals Open
def set_output(self, pin, value, log_output = True):
- Read upRead up
- Exclude checks
Don't use spaces around the '=' sign in function arguments.
Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.
Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):
E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):
Line too long (93 > 79 characters) Open
logger.info("using multi-keyboard mode (keyboards: %s)", ', '.join(config_keyboards))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (86 > 79 characters) Open
store_if_not_exists=store_if_not_exists)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (98 > 79 characters) Open
return_dict[Keyboard+'.'+str(pin)] = self.__keyboards[Keyboard].status_output(pin)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.