This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

You can set literals you want to fold with CountAsOne. Available are: 'array', 'hash', and 'heredoc'. Each literal will be counted as one line regardless of its actual size.

NOTE: The ExcludedMethods configuration is deprecated and only kept for backwards compatibility. Please use IgnoredMethods instead.

Example: CountAsOne: ['array', 'heredoc']

def m
  array = [       # +1
    1,
    2
  ]

  hash = {        # +3
    key: 'value'
  }

  <<~HEREDOC      # +1
    Heredoc
    content.
  HEREDOC
end               # 5 points

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

You can set literals you want to fold with CountAsOne. Available are: 'array', 'hash', and 'heredoc'. Each literal will be counted as one line regardless of its actual size.

NOTE: The ExcludedMethods configuration is deprecated and only kept for backwards compatibility. Please use IgnoredMethods instead.

Example: CountAsOne: ['array', 'heredoc']

def m
  array = [       # +1
    1,
    2
  ]

  hash = {        # +3
    key: 'value'
  }

  <<~HEREDOC      # +1
    Heredoc
    content.
  HEREDOC
end               # 5 points

This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one. Blocks that are calls to builtin iteration methods (e.g. `ary.map{...}) also add one, others are ignored.

def each_child_node(*types)               # count begins: 1
  unless block_given?                     # unless: +1
    return to_enum(__method__, *types)

  children.each do |child|                # each{}: +1
    next unless child.is_a?(Node)         # unless: +1

    yield child if types.empty? ||        # if: +1, ||: +1
                   types.include?(child.type)
  end

  self
end                                       # total: 6

This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one. Blocks that are calls to builtin iteration methods (e.g. `ary.map{...}) also add one, others are ignored.

def each_child_node(*types)               # count begins: 1
  unless block_given?                     # unless: +1
    return to_enum(__method__, *types)

  children.each do |child|                # each{}: +1
    next unless child.is_a?(Node)         # unless: +1

    yield child if types.empty? ||        # if: +1, ||: +1
                   types.include?(child.type)
  end

  self
end                                       # total: 6

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

You can set literals you want to fold with CountAsOne. Available are: 'array', 'hash', and 'heredoc'. Each literal will be counted as one line regardless of its actual size.

NOTE: The ExcludedMethods configuration is deprecated and only kept for backwards compatibility. Please use IgnoredMethods instead.

Example: CountAsOne: ['array', 'heredoc']

def m
  array = [       # +1
    1,
    2
  ]

  hash = {        # +3
    key: 'value'
  }

  <<~HEREDOC      # +1
    Heredoc
    content.
  HEREDOC
end               # 5 points

This cop tries to produce a complexity score that's a measure of the complexity the reader experiences when looking at a method. For that reason it considers when nodes as something that doesn't add as much complexity as an if or a &&. Except if it's one of those special case/when constructs where there's no expression after case. Then the cop treats it as an if/elsif/elsif... and lets all the when nodes count. In contrast to the CyclomaticComplexity cop, this cop considers else nodes as adding complexity.

Example:

def my_method                   # 1
  if cond                       # 1
    case var                    # 2 (0.8 + 4 * 0.2, rounded)
    when 1 then func_one
    when 2 then func_two
    when 3 then func_three
    when 4..10 then func_other
    end
  else                          # 1
    do_something until a && b   # 2
  end                           # ===
end                             # 7 complexity points

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

You can set literals you want to fold with CountAsOne. Available are: 'array', 'hash', and 'heredoc'. Each literal will be counted as one line regardless of its actual size.

NOTE: The ExcludedMethods configuration is deprecated and only kept for backwards compatibility. Please use IgnoredMethods instead.

Example: CountAsOne: ['array', 'heredoc']

something do
  array = [         # +1
    1,
    2
  ]

  hash = {          # +3
    key: 'value'
  }

  msg = <<~HEREDOC  # +1
    Heredoc
    content.
  HEREDOC
end                 # 5 points

NOTE: This cop does not apply for Struct definitions.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

You can set literals you want to fold with CountAsOne. Available are: 'array', 'hash', and 'heredoc'. Each literal will be counted as one line regardless of its actual size.

NOTE: The ExcludedMethods configuration is deprecated and only kept for backwards compatibility. Please use IgnoredMethods instead.

Example: CountAsOne: ['array', 'heredoc']

something do
  array = [         # +1
    1,
    2
  ]

  hash = {          # +3
    key: 'value'
  }

  msg = <<~HEREDOC  # +1
    Heredoc
    content.
  HEREDOC
end                 # 5 points

NOTE: This cop does not apply for Struct definitions.

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric and https://en.wikipedia.org/wiki/ABC_Software_Metric.

Interpreting ABC size:

• <= 17 satisfactory
• 18..30 unsatisfactory
• > 30 dangerous

You can have repeated "attributes" calls count as a single "branch". For this purpose, attributes are any method with no argument; no attempt is meant to distinguish actual attr_reader from other methods.

Example: CountRepeatedAttributes: false (default is true)

# `model` and `current_user`, refenced 3 times each,
 # are each counted as only 1 branch each if
 # `CountRepeatedAttributes` is set to 'false'

 def search
   @posts = model.active.visible_by(current_user)
             .search(params[:q])
   @posts = model.some_process(@posts, current_user)
   @posts = model.another_process(@posts, current_user)

   render 'pages/search/page'
 end

This cop also takes into account IgnoredMethods (defaults to [])

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric and https://en.wikipedia.org/wiki/ABC_Software_Metric.

Interpreting ABC size:

• <= 17 satisfactory
• 18..30 unsatisfactory
• > 30 dangerous

You can have repeated "attributes" calls count as a single "branch". For this purpose, attributes are any method with no argument; no attempt is meant to distinguish actual attr_reader from other methods.

Example: CountRepeatedAttributes: false (default is true)

# `model` and `current_user`, refenced 3 times each,
 # are each counted as only 1 branch each if
 # `CountRepeatedAttributes` is set to 'false'

 def search
   @posts = model.active.visible_by(current_user)
             .search(params[:q])
   @posts = model.some_process(@posts, current_user)
   @posts = model.another_process(@posts, current_user)

   render 'pages/search/page'
 end

This cop also takes into account IgnoredMethods (defaults to [])

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop. It also ignores a shebang line by default.

This cop has some autocorrection capabilities. It can programmatically shorten certain long lines by inserting line breaks into expressions that can be safely split across lines. These include arrays, hashes, and method calls with argument lists.

If autocorrection is enabled, the following Layout cops are recommended to further format the broken lines. (Many of these are enabled by default.)

• ArgumentAlignment
• BlockAlignment
• BlockDelimiters
• BlockEndNewline
• ClosingParenthesisIndentation
• FirstArgumentIndentation
• FirstArrayElementIndentation
• FirstHashElementIndentation
• FirstParameterIndentation
• HashAlignment
• IndentationWidth
• MultilineArrayLineBreaks
• MultilineBlockLayout
• MultilineHashBraceLayout
• MultilineHashKeyLineBreaks
• MultilineMethodArgumentLineBreaks
• ParameterAlignment

Together, these cops will pretty print hashes, arrays, method calls, etc. For example, let's say the max columns is 25:

Example:

# bad
{foo: "0000000000", bar: "0000000000", baz: "0000000000"}

# good
{foo: "0000000000",
bar: "0000000000", baz: "0000000000"}

# good (with recommended cops enabled)
{
  foo: "0000000000",
  bar: "0000000000",
  baz: "0000000000",
}

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop. It also ignores a shebang line by default.

This cop has some autocorrection capabilities. It can programmatically shorten certain long lines by inserting line breaks into expressions that can be safely split across lines. These include arrays, hashes, and method calls with argument lists.

If autocorrection is enabled, the following Layout cops are recommended to further format the broken lines. (Many of these are enabled by default.)

• ArgumentAlignment
• BlockAlignment
• BlockDelimiters
• BlockEndNewline
• ClosingParenthesisIndentation
• FirstArgumentIndentation
• FirstArrayElementIndentation
• FirstHashElementIndentation
• FirstParameterIndentation
• HashAlignment
• IndentationWidth
• MultilineArrayLineBreaks
• MultilineBlockLayout
• MultilineHashBraceLayout
• MultilineHashKeyLineBreaks
• MultilineMethodArgumentLineBreaks
• ParameterAlignment

Together, these cops will pretty print hashes, arrays, method calls, etc. For example, let's say the max columns is 25:

Example:

# bad
{foo: "0000000000", bar: "0000000000", baz: "0000000000"}

# good
{foo: "0000000000",
bar: "0000000000", baz: "0000000000"}

# good (with recommended cops enabled)
{
  foo: "0000000000",
  bar: "0000000000",
  baz: "0000000000",
}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

This cop checks for parentheses around the arguments in method definitions. Both instance and class/singleton methods are checked.

This cop does not consider endless methods, since parentheses are always required for them.

Example: EnforcedStyle: require_parentheses (default)

# The `require_parentheses` style requires method definitions
# to always use parentheses

# bad
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Example: EnforcedStyle: requirenoparentheses

# The `require_no_parentheses` style requires method definitions
# to never use parentheses

# bad
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

Example: EnforcedStyle: requirenoparenthesesexceptmultiline

# The `require_no_parentheses_except_multiline` style prefers no
# parentheses when method definition arguments fit on single line,
# but prefers parentheses when arguments span multiple lines.

# bad
def bar(num1, num2)
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the IgnoredMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is ignored unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except IgnoredMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: IgnoredMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the IgnoredMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is ignored unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except IgnoredMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: IgnoredMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

Checks for if and unless statements that would fit on one line if written as modifier if/unless. The cop also checks for modifier if/unless lines that exceed the maximum line length.

The maximum line length is configured in the Layout/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

do_something_with_a_long_name(arg) if long_condition_that_prevents_code_fit_on_single_line

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

if long_condition_that_prevents_code_fit_on_single_line
  do_something_with_a_long_name(arg)
end

if short_condition # a long comment that makes it too long if it were just a single line
  do_something
end

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

This cop checks for parentheses around the arguments in method definitions. Both instance and class/singleton methods are checked.

This cop does not consider endless methods, since parentheses are always required for them.

Example: EnforcedStyle: require_parentheses (default)

# The `require_parentheses` style requires method definitions
# to always use parentheses

# bad
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Example: EnforcedStyle: requirenoparentheses

# The `require_no_parentheses` style requires method definitions
# to never use parentheses

# bad
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

Example: EnforcedStyle: requirenoparenthesesexceptmultiline

# The `require_no_parentheses_except_multiline` style prefers no
# parentheses when method definition arguments fit on single line,
# but prefers parentheses when arguments span multiple lines.

# bad
def bar(num1, num2)
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }
foo = { { a: 1 } => { b: { c: 2 } } }

# good
h = { a: { b: 2 }}
foo = {{ a: 1 } => { b: { c: 2 }}}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the IgnoredMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is ignored unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except IgnoredMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: IgnoredMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, constant definitions or constant visibility declarations.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

module Math
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

# allowed
  # Class without body
  class Person
  end

  # Namespace - A namespace can be a class or a module
  # Containing a class
  module Namespace
    # Description/Explanation of Person class
    class Person
      # ...
    end
  end

  # Containing constant visibility declaration
  module Namespace
    class Private
    end

    private_constant :Private
  end

  # Containing constant definition
  module Namespace
    Public = Class.new
  end

  # Macro calls
  module Namespace
    extend Foo
  end

Example: AllowedConstants: ['ClassMethods']

# good
 module A
   module ClassMethods
     # ...
   end
  end

This cop checks for parentheses around the arguments in method definitions. Both instance and class/singleton methods are checked.

This cop does not consider endless methods, since parentheses are always required for them.

Example: EnforcedStyle: require_parentheses (default)

# The `require_parentheses` style requires method definitions
# to always use parentheses

# bad
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Example: EnforcedStyle: requirenoparentheses

# The `require_no_parentheses` style requires method definitions
# to never use parentheses

# bad
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

Example: EnforcedStyle: requirenoparenthesesexceptmultiline

# The `require_no_parentheses_except_multiline` style prefers no
# parentheses when method definition arguments fit on single line,
# but prefers parentheses when arguments span multiple lines.

# bad
def bar(num1, num2)
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, constant definitions or constant visibility declarations.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

module Math
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

# allowed
  # Class without body
  class Person
  end

  # Namespace - A namespace can be a class or a module
  # Containing a class
  module Namespace
    # Description/Explanation of Person class
    class Person
      # ...
    end
  end

  # Containing constant visibility declaration
  module Namespace
    class Private
    end

    private_constant :Private
  end

  # Containing constant definition
  module Namespace
    Public = Class.new
  end

  # Macro calls
  module Namespace
    extend Foo
  end

Example: AllowedConstants: ['ClassMethods']

# good
 module A
   module ClassMethods
     # ...
   end
  end

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the IgnoredMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is ignored unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except IgnoredMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: IgnoredMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

This cop checks for parentheses around the arguments in method definitions. Both instance and class/singleton methods are checked.

This cop does not consider endless methods, since parentheses are always required for them.

Example: EnforcedStyle: require_parentheses (default)

# The `require_parentheses` style requires method definitions
# to always use parentheses

# bad
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Example: EnforcedStyle: requirenoparentheses

# The `require_no_parentheses` style requires method definitions
# to never use parentheses

# bad
def bar(num1, num2)
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

Example: EnforcedStyle: requirenoparenthesesexceptmultiline

# The `require_no_parentheses_except_multiline` style prefers no
# parentheses when method definition arguments fit on single line,
# but prefers parentheses when arguments span multiple lines.

# bad
def bar(num1, num2)
  num1 + num2
end

def foo descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name
  do_something
end

# good
def bar num1, num2
  num1 + num2
end

def foo(descriptive_var_name,
        another_descriptive_var_name,
        last_descriptive_var_name)
  do_something
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Use next to skip iteration instead of a condition at the end.

Example: EnforcedStyle: skipmodifierifs (default)

# bad
[1, 2].each do |a|
  if a == 1
    puts a
  end
end

# good
[1, 2].each do |a|
  next unless a == 1
  puts a
end

# good
[1, 2].each do |a|
  puts a if a == 1
end

Example: EnforcedStyle: always

# With `always` all conditions at the end of an iteration needs to be
# replaced by next - with `skip_modifier_ifs` the modifier if like
# this one are ignored: `[1, 2].each { |a| puts a if a == 1 }`

# bad
[1, 2].each do |a|
  puts a if a == 1
end

# bad
[1, 2].each do |a|
  if a == 1
    puts a
  end
end

# good
[1, 2].each do |a|
  next unless a == 1
  puts a
end

Use next to skip iteration instead of a condition at the end.

Example: EnforcedStyle: skipmodifierifs (default)

# bad
[1, 2].each do |a|
  if a == 1
    puts a
  end
end

# good
[1, 2].each do |a|
  next unless a == 1
  puts a
end

# good
[1, 2].each do |a|
  puts a if a == 1
end

Example: EnforcedStyle: always

# With `always` all conditions at the end of an iteration needs to be
# replaced by next - with `skip_modifier_ifs` the modifier if like
# this one are ignored: `[1, 2].each { |a| puts a if a == 1 }`

# bad
[1, 2].each do |a|
  puts a if a == 1
end

# bad
[1, 2].each do |a|
  if a == 1
    puts a
  end
end

# good
[1, 2].each do |a|
  next unless a == 1
  puts a
end

Use next to skip iteration instead of a condition at the end.

Example: EnforcedStyle: skipmodifierifs (default)

# bad
[1, 2].each do |a|
  if a == 1
    puts a
  end
end

# good
[1, 2].each do |a|
  next unless a == 1
  puts a
end

# good
[1, 2].each do |a|
  puts a if a == 1
end

Example: EnforcedStyle: always

# With `always` all conditions at the end of an iteration needs to be
# replaced by next - with `skip_modifier_ifs` the modifier if like
# this one are ignored: `[1, 2].each { |a| puts a if a == 1 }`

# bad
[1, 2].each do |a|
  puts a if a == 1
end

# bad
[1, 2].each do |a|
  if a == 1
    puts a
  end
end

# good
[1, 2].each do |a|
  next unless a == 1
  puts a
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"