Showing 20,971 of 20,976 total issues
Return statement should not contain assignment. Open
return this.$element = $(node.element);
- Read upRead up
- Exclude checks
Disallow Assignment in return Statement (no-return-assign)
One of the interesting, and sometimes confusing, aspects of JavaScript is that assignment can happen at almost any point. Because of this, an errant equals sign can end up causing assignment when the true intent was to do a comparison. This is especially true when using a return
statement. For example:
function doSomething() {
return foo = bar + 2;
}
It is difficult to tell the intent of the return
statement here. It's possible that the function is meant to return the result of bar + 2
, but then why is it assigning to foo
? It's also possible that the intent was to use a comparison operator such as ==
and that this code is an error.
Because of this ambiguity, it's considered a best practice to not use assignment in return
statements.
Rule Details
This rule aims to eliminate assignments from return
statements. As such, it will warn whenever an assignment is found as part of return
.
Options
The rule takes one option, a string, which must contain one of the following values:
-
except-parens
(default): Disallow assignments unless they are enclosed in parentheses. -
always
: Disallow all assignments.
except-parens
This is the default option. It disallows assignments unless they are enclosed in parentheses.
Examples of incorrect code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
Examples of correct code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
function doSomething() {
return (foo = bar + 2);
}
always
This option disallows all assignments in return
statements.
All assignments are treated as problems.
Examples of incorrect code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
function doSomething() {
return (foo = bar + 2);
}
Examples of correct code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
When Not To Use It
If you want to allow the use of assignment operators in a return
statement, then you can safely disable this rule.
Source: http://eslint.org/docs/rules/
Move the invocation into the parens that contain the function. Open
VisibleNodeIterator = (function() {
- Read upRead up
- Exclude checks
Require IIFEs to be Wrapped (wrap-iife)
You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.
// function expression could be unwrapped
var x = function () { return { y: 1 };}();
// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError
Rule Details
This rule requires all immediately-invoked function expressions to be wrapped in parentheses.
Options
This rule has two options, a string option and an object option.
String option:
-
"outside"
enforces always wrapping the call expression. The default is"outside"
. -
"inside"
enforces always wrapping the function expression. -
"any"
enforces always wrapping, but allows either style.
Object option:
-
"functionPrototypeMethods": true
additionally enforces wrapping function expressions invoked using.call
and.apply
. The default isfalse
.
outside
Examples of incorrect code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression
Examples of correct code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
inside
Examples of incorrect code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression
Examples of correct code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = (function () { return { y: 1 };})(); // wrapped function expression
any
Examples of incorrect code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = function () { return { y: 1 };}(); // unwrapped
Examples of correct code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression
functionPrototypeMethods
Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))
Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)
Source: http://eslint.org/docs/rules/
Use ‘===’ to compare with ‘null’. Open
if (jQuery.tableDnD.dragObject == null) {
- Read upRead up
- Exclude checks
Disallow Null Comparisons (no-eq-null)
Comparing to null
without a type-checking operator (==
or !=
), can have unintended results as the comparison will evaluate to true when comparing to not just a null
, but also an undefined
value.
if (foo == null) {
bar();
}
Rule Details
The no-eq-null
rule aims reduce potential bug and unwanted behavior by ensuring that comparisons to null
only match null
, and not also undefined
. As such it will flag comparisons to null when using ==
and !=
.
Examples of incorrect code for this rule:
/*eslint no-eq-null: "error"*/
if (foo == null) {
bar();
}
while (qux != null) {
baz();
}
Examples of correct code for this rule:
/*eslint no-eq-null: "error"*/
if (foo === null) {
bar();
}
while (qux !== null) {
baz();
}
Source: http://eslint.org/docs/rules/
Expected '===' and instead saw '=='. Open
return ((qq.chrome() || (qq.safari() && qq.windows())) && e.clientX == 0 && e.clientY == 0) // null coords for Chrome and Safari Windows
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
Expected '===' and instead saw '=='. Open
if (node_class == null) {
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
Use ‘===’ to compare with ‘null’. Open
if (slide == null) {
- Read upRead up
- Exclude checks
Disallow Null Comparisons (no-eq-null)
Comparing to null
without a type-checking operator (==
or !=
), can have unintended results as the comparison will evaluate to true when comparing to not just a null
, but also an undefined
value.
if (foo == null) {
bar();
}
Rule Details
The no-eq-null
rule aims reduce potential bug and unwanted behavior by ensuring that comparisons to null
only match null
, and not also undefined
. As such it will flag comparisons to null when using ==
and !=
.
Examples of incorrect code for this rule:
/*eslint no-eq-null: "error"*/
if (foo == null) {
bar();
}
while (qux != null) {
baz();
}
Examples of correct code for this rule:
/*eslint no-eq-null: "error"*/
if (foo === null) {
bar();
}
while (qux !== null) {
baz();
}
Source: http://eslint.org/docs/rules/
Expected '===' and instead saw '=='. Open
if (slide == null) {
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
Expected '!==' and instead saw '!='. Open
if (!((this.JSON != null) && (this.JSON.stringify != null) && typeof this.JSON.stringify === 'function')) {
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
Move the invocation into the parens that contain the function. Open
DragElement = (function() {
- Read upRead up
- Exclude checks
Require IIFEs to be Wrapped (wrap-iife)
You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.
// function expression could be unwrapped
var x = function () { return { y: 1 };}();
// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError
Rule Details
This rule requires all immediately-invoked function expressions to be wrapped in parentheses.
Options
This rule has two options, a string option and an object option.
String option:
-
"outside"
enforces always wrapping the call expression. The default is"outside"
. -
"inside"
enforces always wrapping the function expression. -
"any"
enforces always wrapping, but allows either style.
Object option:
-
"functionPrototypeMethods": true
additionally enforces wrapping function expressions invoked using.call
and.apply
. The default isfalse
.
outside
Examples of incorrect code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression
Examples of correct code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
inside
Examples of incorrect code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression
Examples of correct code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = (function () { return { y: 1 };})(); // wrapped function expression
any
Examples of incorrect code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = function () { return { y: 1 };}(); // unwrapped
Examples of correct code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression
functionPrototypeMethods
Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))
Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)
Source: http://eslint.org/docs/rules/
Move the invocation into the parens that contain the function. Open
(function($, undefined) {
- Read upRead up
- Exclude checks
Require IIFEs to be Wrapped (wrap-iife)
You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.
// function expression could be unwrapped
var x = function () { return { y: 1 };}();
// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError
Rule Details
This rule requires all immediately-invoked function expressions to be wrapped in parentheses.
Options
This rule has two options, a string option and an object option.
String option:
-
"outside"
enforces always wrapping the call expression. The default is"outside"
. -
"inside"
enforces always wrapping the function expression. -
"any"
enforces always wrapping, but allows either style.
Object option:
-
"functionPrototypeMethods": true
additionally enforces wrapping function expressions invoked using.call
and.apply
. The default isfalse
.
outside
Examples of incorrect code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression
Examples of correct code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
inside
Examples of incorrect code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression
Examples of correct code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = (function () { return { y: 1 };})(); // wrapped function expression
any
Examples of incorrect code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = function () { return { y: 1 };}(); // unwrapped
Examples of correct code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression
functionPrototypeMethods
Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))
Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)
Source: http://eslint.org/docs/rules/
Return statement should not contain assignment. Open
return $.fn[widget_name] = function() {
- Read upRead up
- Exclude checks
Disallow Assignment in return Statement (no-return-assign)
One of the interesting, and sometimes confusing, aspects of JavaScript is that assignment can happen at almost any point. Because of this, an errant equals sign can end up causing assignment when the true intent was to do a comparison. This is especially true when using a return
statement. For example:
function doSomething() {
return foo = bar + 2;
}
It is difficult to tell the intent of the return
statement here. It's possible that the function is meant to return the result of bar + 2
, but then why is it assigning to foo
? It's also possible that the intent was to use a comparison operator such as ==
and that this code is an error.
Because of this ambiguity, it's considered a best practice to not use assignment in return
statements.
Rule Details
This rule aims to eliminate assignments from return
statements. As such, it will warn whenever an assignment is found as part of return
.
Options
The rule takes one option, a string, which must contain one of the following values:
-
except-parens
(default): Disallow assignments unless they are enclosed in parentheses. -
always
: Disallow all assignments.
except-parens
This is the default option. It disallows assignments unless they are enclosed in parentheses.
Examples of incorrect code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
Examples of correct code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
function doSomething() {
return (foo = bar + 2);
}
always
This option disallows all assignments in return
statements.
All assignments are treated as problems.
Examples of incorrect code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
function doSomething() {
return (foo = bar + 2);
}
Examples of correct code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
When Not To Use It
If you want to allow the use of assignment operators in a return
statement, then you can safely disable this rule.
Source: http://eslint.org/docs/rules/
Wrap an immediate function invocation in parentheses. Open
blackberry: function() {
- Read upRead up
- Exclude checks
Require IIFEs to be Wrapped (wrap-iife)
You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.
// function expression could be unwrapped
var x = function () { return { y: 1 };}();
// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError
Rule Details
This rule requires all immediately-invoked function expressions to be wrapped in parentheses.
Options
This rule has two options, a string option and an object option.
String option:
-
"outside"
enforces always wrapping the call expression. The default is"outside"
. -
"inside"
enforces always wrapping the function expression. -
"any"
enforces always wrapping, but allows either style.
Object option:
-
"functionPrototypeMethods": true
additionally enforces wrapping function expressions invoked using.call
and.apply
. The default isfalse
.
outside
Examples of incorrect code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression
Examples of correct code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
inside
Examples of incorrect code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression
Examples of correct code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = (function () { return { y: 1 };})(); // wrapped function expression
any
Examples of incorrect code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = function () { return { y: 1 };}(); // unwrapped
Examples of correct code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression
functionPrototypeMethods
Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))
Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)
Source: http://eslint.org/docs/rules/
Wrap an immediate function invocation in parentheses. Open
any: function() {
- Read upRead up
- Exclude checks
Require IIFEs to be Wrapped (wrap-iife)
You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.
// function expression could be unwrapped
var x = function () { return { y: 1 };}();
// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError
Rule Details
This rule requires all immediately-invoked function expressions to be wrapped in parentheses.
Options
This rule has two options, a string option and an object option.
String option:
-
"outside"
enforces always wrapping the call expression. The default is"outside"
. -
"inside"
enforces always wrapping the function expression. -
"any"
enforces always wrapping, but allows either style.
Object option:
-
"functionPrototypeMethods": true
additionally enforces wrapping function expressions invoked using.call
and.apply
. The default isfalse
.
outside
Examples of incorrect code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression
Examples of correct code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
inside
Examples of incorrect code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression
Examples of correct code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = (function () { return { y: 1 };})(); // wrapped function expression
any
Examples of incorrect code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = function () { return { y: 1 };}(); // unwrapped
Examples of correct code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression
functionPrototypeMethods
Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))
Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)
Source: http://eslint.org/docs/rules/
Return statement should not contain assignment. Open
return this.mouse_delay = mouse_delay;
- Read upRead up
- Exclude checks
Disallow Assignment in return Statement (no-return-assign)
One of the interesting, and sometimes confusing, aspects of JavaScript is that assignment can happen at almost any point. Because of this, an errant equals sign can end up causing assignment when the true intent was to do a comparison. This is especially true when using a return
statement. For example:
function doSomething() {
return foo = bar + 2;
}
It is difficult to tell the intent of the return
statement here. It's possible that the function is meant to return the result of bar + 2
, but then why is it assigning to foo
? It's also possible that the intent was to use a comparison operator such as ==
and that this code is an error.
Because of this ambiguity, it's considered a best practice to not use assignment in return
statements.
Rule Details
This rule aims to eliminate assignments from return
statements. As such, it will warn whenever an assignment is found as part of return
.
Options
The rule takes one option, a string, which must contain one of the following values:
-
except-parens
(default): Disallow assignments unless they are enclosed in parentheses. -
always
: Disallow all assignments.
except-parens
This is the default option. It disallows assignments unless they are enclosed in parentheses.
Examples of incorrect code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
Examples of correct code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
function doSomething() {
return (foo = bar + 2);
}
always
This option disallows all assignments in return
statements.
All assignments are treated as problems.
Examples of incorrect code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
function doSomething() {
return (foo = bar + 2);
}
Examples of correct code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
When Not To Use It
If you want to allow the use of assignment operators in a return
statement, then you can safely disable this rule.
Source: http://eslint.org/docs/rules/
Return statement should not contain assignment. Open
return this.parent = null;
- Read upRead up
- Exclude checks
Disallow Assignment in return Statement (no-return-assign)
One of the interesting, and sometimes confusing, aspects of JavaScript is that assignment can happen at almost any point. Because of this, an errant equals sign can end up causing assignment when the true intent was to do a comparison. This is especially true when using a return
statement. For example:
function doSomething() {
return foo = bar + 2;
}
It is difficult to tell the intent of the return
statement here. It's possible that the function is meant to return the result of bar + 2
, but then why is it assigning to foo
? It's also possible that the intent was to use a comparison operator such as ==
and that this code is an error.
Because of this ambiguity, it's considered a best practice to not use assignment in return
statements.
Rule Details
This rule aims to eliminate assignments from return
statements. As such, it will warn whenever an assignment is found as part of return
.
Options
The rule takes one option, a string, which must contain one of the following values:
-
except-parens
(default): Disallow assignments unless they are enclosed in parentheses. -
always
: Disallow all assignments.
except-parens
This is the default option. It disallows assignments unless they are enclosed in parentheses.
Examples of incorrect code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
Examples of correct code for the default "except-parens"
option:
/*eslint no-return-assign: "error"*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
function doSomething() {
return (foo = bar + 2);
}
always
This option disallows all assignments in return
statements.
All assignments are treated as problems.
Examples of incorrect code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo = bar + 2;
}
function doSomething() {
return foo += 2;
}
function doSomething() {
return (foo = bar + 2);
}
Examples of correct code for the "always"
option:
/*eslint no-return-assign: ["error", "always"]*/
function doSomething() {
return foo == bar + 2;
}
function doSomething() {
return foo === bar + 2;
}
When Not To Use It
If you want to allow the use of assignment operators in a return
statement, then you can safely disable this rule.
Source: http://eslint.org/docs/rules/
Use ‘===’ to compare with ‘null’. Open
if (slide == null) {
- Read upRead up
- Exclude checks
Disallow Null Comparisons (no-eq-null)
Comparing to null
without a type-checking operator (==
or !=
), can have unintended results as the comparison will evaluate to true when comparing to not just a null
, but also an undefined
value.
if (foo == null) {
bar();
}
Rule Details
The no-eq-null
rule aims reduce potential bug and unwanted behavior by ensuring that comparisons to null
only match null
, and not also undefined
. As such it will flag comparisons to null when using ==
and !=
.
Examples of incorrect code for this rule:
/*eslint no-eq-null: "error"*/
if (foo == null) {
bar();
}
while (qux != null) {
baz();
}
Examples of correct code for this rule:
/*eslint no-eq-null: "error"*/
if (foo === null) {
bar();
}
while (qux !== null) {
baz();
}
Source: http://eslint.org/docs/rules/
Use ‘===’ to compare with ‘null’. Open
if (slide == null) {
- Read upRead up
- Exclude checks
Disallow Null Comparisons (no-eq-null)
Comparing to null
without a type-checking operator (==
or !=
), can have unintended results as the comparison will evaluate to true when comparing to not just a null
, but also an undefined
value.
if (foo == null) {
bar();
}
Rule Details
The no-eq-null
rule aims reduce potential bug and unwanted behavior by ensuring that comparisons to null
only match null
, and not also undefined
. As such it will flag comparisons to null when using ==
and !=
.
Examples of incorrect code for this rule:
/*eslint no-eq-null: "error"*/
if (foo == null) {
bar();
}
while (qux != null) {
baz();
}
Examples of correct code for this rule:
/*eslint no-eq-null: "error"*/
if (foo === null) {
bar();
}
while (qux !== null) {
baz();
}
Source: http://eslint.org/docs/rules/
Use ‘===’ to compare with ‘null’. Open
if (from_node == null) {
- Read upRead up
- Exclude checks
Disallow Null Comparisons (no-eq-null)
Comparing to null
without a type-checking operator (==
or !=
), can have unintended results as the comparison will evaluate to true when comparing to not just a null
, but also an undefined
value.
if (foo == null) {
bar();
}
Rule Details
The no-eq-null
rule aims reduce potential bug and unwanted behavior by ensuring that comparisons to null
only match null
, and not also undefined
. As such it will flag comparisons to null when using ==
and !=
.
Examples of incorrect code for this rule:
/*eslint no-eq-null: "error"*/
if (foo == null) {
bar();
}
while (qux != null) {
baz();
}
Examples of correct code for this rule:
/*eslint no-eq-null: "error"*/
if (foo === null) {
bar();
}
while (qux !== null) {
baz();
}
Source: http://eslint.org/docs/rules/
Expected '===' and instead saw '=='. Open
if (this._supportsLocalStorage == null) {
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
The body of a for-in should be wrapped in an if statement to filter unwanted properties from the prototype. Open
for (id in this.selected_nodes) {
- Read upRead up
- Exclude checks
Require Guarding for-in (guard-for-in)
Looping over objects with a for in
loop will include properties that are inherited through the prototype chain. This behavior can lead to unexpected items in your for loop.
for (key in foo) {
doSomething(key);
}
Note that simply checking foo.hasOwnProperty(key)
is likely to cause an error in some cases; see [no-prototype-builtins](no-prototype-builtins.md).
Rule Details
This rule is aimed at preventing unexpected behavior that could arise from using a for in
loop without filtering the results in the loop. As such, it will warn when for in
loops do not filter their results with an if
statement.
Examples of incorrect code for this rule:
/*eslint guard-for-in: "error"*/
for (key in foo) {
doSomething(key);
}
Examples of correct code for this rule:
/*eslint guard-for-in: "error"*/
for (key in foo) {
if (Object.prototype.hasOwnProperty.call(foo, key)) {
doSomething(key);
}
if ({}.hasOwnProperty.call(foo, key)) {
doSomething(key);
}
}
Related Rules
- [no-prototype-builtins](no-prototype-builtins.md)