Showing 676 of 676 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
Gitdocs.log_warn("#{title}: #{message}")
if show_notification
instance.notify(title, message, :pending)
else
Kernel.warn("#{title}: #{message}")
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
specify do
last_response.status.must_equal(200)
last_response.body.must_include('Select a share to browse')
last_response.body.must_include('id1')
last_response.body.must_include('path1')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Find.prune if File.basename(path) == '.git'
if File.directory?(path) && Dir.entries(path).count == 2
FileUtils.touch(File.join(path, '.gitignore'))
end
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Find.prune if File.basename(path) == '.git'
if File.directory?(path) && Dir.entries(path).count == 2
FileUtils.touch(File.join(path, '.gitignore'))
end
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe 'with changes' do
let(:result) { { 'Alice' => 1, 'Bob' => 3 } }
before do
Gitdocs::Notifier.expects(:info).with(
'Updated with 4 changes',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe 'with changes' do
let(:result) { { 'Alice' => 1, 'Bob' => 3 } }
before do
Gitdocs::Notifier.expects(:info).with(
'Pushed 4 changes', 'root has been pushed', :show_notifications
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency mocha
should appear before rake
. Open
s.add_development_dependency 'mocha', '~> 1.1.0'
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
%w
-literals should be delimited by [
and ]
. Open
%w(file2 context2b),
- Read upRead up
- Exclude checks
This cop enforces the consistent usage of %
-literal delimiters.
Specify the 'default' key to set all preferred delimiters at once. You can continue to specify individual preferred delimiters to override the default.
Example:
# Style/PercentLiteralDelimiters:
# PreferredDelimiters:
# default: '[]'
# '%i': '()'
# good
%w[alpha beta] + %i(gamma delta)
# bad
%W(alpha #{beta})
# bad
%I(alpha beta)
Add an empty line after magic comments. Open
require File.expand_path('../test_helper', __FILE__)
- Read upRead up
- Exclude checks
Checks for a newline after the final magic comment.
Example:
# good
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
# bad
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency sqlite3
should appear before tilt
. Open
s.add_dependency 'sqlite3', '~> 1.3.4'
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency aruba
should appear before mocha
. Open
s.add_development_dependency 'aruba', '~> 0.7.0'
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
%w
-literals should be delimited by [
and ]
. Open
urls: %w(/css /js /img /doc),
- Read upRead up
- Exclude checks
This cop enforces the consistent usage of %
-literal delimiters.
Specify the 'default' key to set all preferred delimiters at once. You can continue to specify individual preferred delimiters to override the default.
Example:
# Style/PercentLiteralDelimiters:
# PreferredDelimiters:
# default: '[]'
# '%i': '()'
# good
%w[alpha beta] + %i(gamma delta)
# bad
%W(alpha #{beta})
# bad
%I(alpha beta)
Unnecessary utf-8 encoding comment. Open
# -*- encoding : utf-8 -*-
- Exclude checks
Align .with
with .expects
on line 55. Open
.with(:host, :port)
- Read upRead up
- Exclude checks
This cop checks the indentation of the method name part in method calls that span more than one line.
Example: EnforcedStyle: aligned
# bad
while myvariable
.b
# do something
end
# good
while myvariable
.b
# do something
end
# good
Thing.a
.b
.c
Example: EnforcedStyle: indented
# good
while myvariable
.b
# do something
end
Example: EnforcedStyle: indentedrelativeto_receiver
# good
while myvariable
.a
.b
# do something
end
# good
myvariable = Thing
.a
.b
.c
Put a space before an end-of-line comment. Open
celluloid_fascade.expects(:terminate)#.twice
- Read upRead up
- Exclude checks
This cop checks for missing space between a token and a comment on the same line.
Example:
# bad
1 + 1# this operation does ...
# good
1 + 1 # this operation does ...
Add an empty line after magic comments. Open
require File.expand_path('../test_helper', __FILE__)
- Read upRead up
- Exclude checks
Checks for a newline after the final magic comment.
Example:
# good
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
# bad
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
Add an empty line after magic comments. Open
require File.expand_path('../test_helper', __FILE__)
- Read upRead up
- Exclude checks
Checks for a newline after the final magic comment.
Example:
# good
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
# bad
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency capybara_minitest_spec
should appear before minitest
. Open
s.add_development_dependency 'capybara_minitest_spec', '~> 1.0.2'
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
Add an empty line after magic comments. Open
require File.expand_path('../test_helper', __FILE__)
- Read upRead up
- Exclude checks
Checks for a newline after the final magic comment.
Example:
# good
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
# bad
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
Incorrect indentation detected (column 0 instead of 6). Open
# manager.expects(:sleep).raises(expected_exception)
- Read upRead up
- Exclude checks
This cops checks the indentation of comments.
Example:
# bad
# comment here
def method_name
end
# comment here
a = 'hello'
# yet another comment
if true
true
end
# good
# comment here
def method_name
end
# comment here
a = 'hello'
# yet another comment
if true
true
end