Sign upLogin

nimeshgurung/redux-retry

View on GitHub
Star

Showing 26 of 26 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    setTimeout(() => {
      const instance: any = wrapper.instance();
      instance.retry();
      expect(instance.state.retryAttempt).toBe(1);
      expect(instance.state.loading).toBe(true);
Severity: Major
Found in src/__tests__/Retry.spec.tsx and 1 other location - About 5 hrs to fix
src/__tests__/Retry.spec.tsx on lines 122..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 139.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    setTimeout(() => {
      const instance: any = wrapper.instance();
      instance.retry();
      expect(instance.state.retryAttempt).toBe(1);
      expect(instance.state.loading).toBe(true);
Severity: Major
Found in src/__tests__/Retry.spec.tsx and 1 other location - About 5 hrs to fix
src/__tests__/Retry.spec.tsx on lines 346..354

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 139.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File Retry.spec.tsx has 356 lines of code (exceeds 250 allowed). Consider refactoring.
Open

import { shallow } from 'enzyme';
import * as React from 'react';
import { Retry } from '../';
import { actionTypes } from '../utils';
Severity: Minor
Found in src/__tests__/Retry.spec.tsx - About 4 hrs to fix

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        const wrapper = shallow(
      <Retry
        saga={[
          {
            call: saga,
    Severity: Major
    Found in src/__tests__/Retry.spec.tsx and 1 other location - About 2 hrs to fix
    src/__tests__/Retry.spec.tsx on lines 135..151

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 76.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        const wrapper = shallow(
      <Retry
        saga={[
          {
            call: saga,
    Severity: Major
    Found in src/__tests__/Retry.spec.tsx and 1 other location - About 2 hrs to fix
    src/__tests__/Retry.spec.tsx on lines 175..191

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 76.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        const call1 = (arg: string) => (dispatch: any) => {
      return new Promise((resolve, reject) => {
        setTimeout(() => {
          dispatch(arg);
          reject('error');
    Severity: Major
    Found in src/__tests__/utils.spec.ts and 1 other location - About 1 hr to fix
    src/__tests__/utils.spec.ts on lines 227..234

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 66.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        const call2 = (arg: string) => (dispatch: any) => {
      return new Promise((resolve, reject) => {
        setTimeout(() => {
          dispatch(arg);
          reject('error');
    Severity: Major
    Found in src/__tests__/utils.spec.ts and 1 other location - About 1 hr to fix
    src/__tests__/utils.spec.ts on lines 189..196

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 66.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        const call2 = (arg: string) => (dispatch: any) => {
      return new Promise((resolve, reject) => {
        setTimeout(() => {
          dispatch(arg);
          resolve();
    Severity: Major
    Found in src/__tests__/utils.spec.ts and 2 other locations - About 1 hr to fix
    src/__tests__/utils.spec.ts on lines 146..153
    src/__tests__/utils.spec.ts on lines 218..225

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        const call1 = (arg: string) => (dispatch: any) => {
      return new Promise((resolve, reject) => {
        setTimeout(() => {
          dispatch(arg);
          resolve();
    Severity: Major
    Found in src/__tests__/utils.spec.ts and 2 other locations - About 1 hr to fix
    src/__tests__/utils.spec.ts on lines 146..153
    src/__tests__/utils.spec.ts on lines 155..162

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        const call1 = (arg: string) => (dispatch: any) => {
      return new Promise((resolve, reject) => {
        setTimeout(() => {
          dispatch(arg);
          resolve();
    Severity: Major
    Found in src/__tests__/utils.spec.ts and 2 other locations - About 1 hr to fix
    src/__tests__/utils.spec.ts on lines 155..162
    src/__tests__/utils.spec.ts on lines 218..225

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        shallow(
      <Retry
        saga={{
          call: saga,
          args: []
    Severity: Major
    Found in src/__tests__/Retry.spec.tsx and 1 other location - About 1 hr to fix
    src/__tests__/Retry.spec.tsx on lines 389..400

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 61.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        setTimeout(() => {
      const instance: any = wrapper.instance();
      expect(mockChildren).toHaveBeenCalledWith(instance.state, instance.retry);
      done();
    }, 0);
    Severity: Major
    Found in src/__tests__/Retry.spec.tsx and 1 other location - About 1 hr to fix
    src/__tests__/Retry.spec.tsx on lines 375..379

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 61.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        setTimeout(() => {
      const instance: any = wrapper.instance();
      expect(mockChildren).toHaveBeenCalledWith(instance.state, instance.retry);
      done();
    }, 0);
    Severity: Major
    Found in src/__tests__/Retry.spec.tsx and 1 other location - About 1 hr to fix
    src/__tests__/Retry.spec.tsx on lines 229..233

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 61.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        shallow(
      <Retry
        thunk={{
          call,
          args: []
    Severity: Major
    Found in src/__tests__/Retry.spec.tsx and 1 other location - About 1 hr to fix
    src/__tests__/Retry.spec.tsx on lines 240..251

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 61.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function render has 32 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

      render() {
    return (
      <Retry saga={{ call: getCatFacts, args: ['5887e1d85c873e0011036889'] }}>
        {(retryState, retry) => {
          if (retryState.loading) {
    Severity: Minor
    Found in demo/App.js - About 1 hr to fix

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

          const mockAction = {
      saga: jest.fn(() => true),
      args: [1, 2, 3],
      resolve: jest.fn(),
      reject: jest.fn()
      Severity: Major
      Found in src/__tests__/utils.spec.ts and 1 other location - About 1 hr to fix
      src/__tests__/utils.spec.ts on lines 5..10

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 57.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

          shallow(
      <Retry
        thunk={{
          call,
          args: [1, 2]
      Severity: Major
      Found in src/__tests__/Retry.spec.tsx and 1 other location - About 1 hr to fix
      src/__tests__/Retry.spec.tsx on lines 307..317

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 57.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

          const wrapper = shallow(
      <Retry
        thunk={{
          call,
          args: [1, 2]
      Severity: Major
      Found in src/__tests__/Retry.spec.tsx and 1 other location - About 1 hr to fix
      src/__tests__/Retry.spec.tsx on lines 288..298

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 57.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

          const mockAction = {
      saga: jest.fn(() => true),
      args: [1, 2, 3],
      resolve: jest.fn(),
      reject: jest.fn()
      Severity: Major
      Found in src/__tests__/utils.spec.ts and 1 other location - About 1 hr to fix
      src/__tests__/utils.spec.ts on lines 21..26

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 57.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

          const wrapper = shallow(
      <Retry
        saga={{
          call: saga
        }}
      Severity: Major
      Found in src/__tests__/Retry.spec.tsx and 2 other locations - About 1 hr to fix
      src/__tests__/Retry.spec.tsx on lines 59..68
      src/__tests__/Retry.spec.tsx on lines 84..93

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 55.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language