Sign upLogin

olehmell/subsocial-sdk

View on GitHub
Star
packages/definitions/src/interfaces/augment-api-tx.ts

Summary

Maintainability
F
2 wks
Test Coverage

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      limitedReserveTransferAssets: AugmentedSubmittable<(dest: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, beneficiary: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, assets: XcmVersionedMultiAssets | { V0: any } | { V1: any } | string | Uint8Array, feeAssetItem: u32 | AnyNumber | Uint8Array, weightLimit: XcmV2WeightLimit | { Unlimited: any } | { Limited: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedMultiLocation, XcmVersionedMultiLocation, XcmVersionedMultiAssets, u32, XcmV2WeightLimit]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 7 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 318..318

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 186.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      limitedTeleportAssets: AugmentedSubmittable<(dest: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, beneficiary: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, assets: XcmVersionedMultiAssets | { V0: any } | { V1: any } | string | Uint8Array, feeAssetItem: u32 | AnyNumber | Uint8Array, weightLimit: XcmV2WeightLimit | { Unlimited: any } | { Limited: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedMultiLocation, XcmVersionedMultiLocation, XcmVersionedMultiAssets, u32, XcmV2WeightLimit]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 7 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 298..298

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 186.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      reserveTransferAssets: AugmentedSubmittable<(dest: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, beneficiary: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, assets: XcmVersionedMultiAssets | { V0: any } | { V1: any } | string | Uint8Array, feeAssetItem: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedMultiLocation, XcmVersionedMultiLocation, XcmVersionedMultiAssets, u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 5 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 356..356

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      teleportAssets: AugmentedSubmittable<(dest: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, beneficiary: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array, assets: XcmVersionedMultiAssets | { V0: any } | { V1: any } | string | Uint8Array, feeAssetItem: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedMultiLocation, XcmVersionedMultiLocation, XcmVersionedMultiAssets, u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 5 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 337..337

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      transfer: AugmentedSubmittable<(dest: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, value: Compact<u128> | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, Compact<u128>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 4 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 114..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      transferKeepAlive: AugmentedSubmittable<(dest: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, value: Compact<u128> | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, Compact<u128>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 4 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 85..85

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      generateEnergy: AugmentedSubmittable<(target: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, burnAmount: u128 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, u128]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 3 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 46..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      forceUnreserve: AugmentedSubmittable<(who: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, amount: u128 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, u128]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 3 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 207..207

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      forceSetInnerValue: AugmentedSubmittable<(domain: Bytes | string | Uint8Array, valueOpt: Option<PalletDomainsInnerValue> | null | Uint8Array | PalletDomainsInnerValue | { Account: any } | { Space: any } | { Post: any } | string) => SubmittableExtrinsic<ApiType>, [Bytes, Option<PalletDomainsInnerValue>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 3 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 193..193

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      setInnerValue: AugmentedSubmittable<(domain: Bytes | string | Uint8Array, valueOpt: Option<PalletDomainsInnerValue> | null | Uint8Array | PalletDomainsInnerValue | { Account: any } | { Space: any } | { Post: any } | string) => SubmittableExtrinsic<ApiType>, [Bytes, Option<PalletDomainsInnerValue>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 3 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 174..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      revokeRole: AugmentedSubmittable<(roleId: u64 | AnyNumber | Uint8Array, users: Vec<SubsocialSupportUser> | (SubsocialSupportUser | { Account: any } | { Space: any } | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [u64, Vec<SubsocialSupportUser>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 3 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 595..595

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      grantRole: AugmentedSubmittable<(roleId: u64 | AnyNumber | Uint8Array, users: Vec<SubsocialSupportUser> | (SubsocialSupportUser | { Account: any } | { Space: any } | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [u64, Vec<SubsocialSupportUser>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 3 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 600..600

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      vestOther: AugmentedSubmittable<(target: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 2 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 674..674

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 86.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      setKey: AugmentedSubmittable<(updated: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 2 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 987..987

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 86.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      updatePost: AugmentedSubmittable<(postId: u64 | AnyNumber | Uint8Array, update: PalletPostsPostUpdate | { spaceId?: any; content?: any; hidden?: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64, PalletPostsPostUpdate]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 2 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 659..659

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 85.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      updateSpace: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array, update: PalletSpacesSpaceUpdate | { content?: any; hidden?: any; permissions?: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64, PalletSpacesSpaceUpdate]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 2 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 364..364

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 85.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      addProxy: AugmentedSubmittable<(delegate: AccountId32 | string | Uint8Array, proxyType: SubsocialParachainRuntimeProxyType | 'Any' | 'DomainRegistrar' | number | Uint8Array, delay: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [AccountId32, SubsocialParachainRuntimeProxyType, u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 2 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 563..563

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      removeProxy: AugmentedSubmittable<(delegate: AccountId32 | string | Uint8Array, proxyType: SubsocialParachainRuntimeProxyType | 'Any' | 'DomainRegistrar' | number | Uint8Array, delay: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [AccountId32, SubsocialParachainRuntimeProxyType, u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 2 hrs to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 387..387

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      batchAll: AugmentedSubmittable<(calls: Vec<Call> | (Call | IMethod | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [Vec<Call>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 839..839

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      batch: AugmentedSubmittable<(calls: Vec<Call> | (Call | IMethod | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [Vec<Call>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 856..856

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      killStorage: AugmentedSubmittable<(keys: Vec<Bytes> | (Bytes | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [Vec<Bytes>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 185..185

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 69.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      reserveWords: AugmentedSubmittable<(words: Vec<Bytes> | (Bytes | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [Vec<Bytes>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 731..731

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 69.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      mergeSchedules: AugmentedSubmittable<(schedule1Index: u32 | AnyNumber | Uint8Array, schedule2Index: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u32, u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1013..1013

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 68.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      serviceOverweight: AugmentedSubmittable<(index: u64 | AnyNumber | Uint8Array, weightLimit: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64, u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 933..933

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 68.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      supportTlds: AugmentedSubmittable<(tlds: Vec<Bytes> | (Bytes | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [Vec<Bytes>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 146..146

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      setInvulnerables: AugmentedSubmittable<(updated: Vec<AccountId32> | (AccountId32 | string | Uint8Array)[]) => SubmittableExtrinsic<ApiType>, [Vec<AccountId32>]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 201..201

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      forceUnsubscribeVersionNotify: AugmentedSubmittable<(location: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedMultiLocation]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 259..259

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      forceSubscribeVersionNotify: AugmentedSubmittable<(location: XcmVersionedMultiLocation | { V0: any } | { V1: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedMultiLocation]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 268..268

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      rejectAnnouncement: AugmentedSubmittable<(delegate: AccountId32 | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [AccountId32, H256]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 2 other locations - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 411..411
packages/definitions/src/interfaces/augment-api-tx.ts on lines 536..536

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      announce: AugmentedSubmittable<(real: AccountId32 | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [AccountId32, H256]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 2 other locations - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 517..517
packages/definitions/src/interfaces/augment-api-tx.ts on lines 536..536

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      removeAnnouncement: AugmentedSubmittable<(real: AccountId32 | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [AccountId32, H256]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 2 other locations - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 411..411
packages/definitions/src/interfaces/augment-api-tx.ts on lines 517..517

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      killPrefix: AugmentedSubmittable<(prefix: Bytes | string | Uint8Array, subkeys: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [Bytes, u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 647..647

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      forceFollowSpace: AugmentedSubmittable<(follower: AccountId32 | string | Uint8Array, spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [AccountId32, u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 1 hr to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 727..727

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      setDomainContent: AugmentedSubmittable<(domain: Bytes | string | Uint8Array, newContent: SubsocialSupportContent | { None: any } | { Other: any } | { IPFS: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [Bytes, SubsocialSupportContent]>;
Severity: Minor
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 55 mins to fix
packages/definitions/src/interfaces/augment-api-query.ts on lines 157..157

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      createSpace: AugmentedSubmittable<(content: SubsocialSupportContent | { None: any } | { Other: any } | { IPFS: any } | string | Uint8Array, permissionsOpt: Option<PalletPermissionsSpacePermissions> | null | Uint8Array | PalletPermissionsSpacePermissions | { none?: any; everyone?: any; follower?: any; spaceOwner?: any } | string) => SubmittableExtrinsic<ApiType>, [SubsocialSupportContent, Option<PalletPermissionsSpacePermissions>]>;
Severity: Minor
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 55 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 657..657

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 53.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      forceCreateSpace: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array, created: SubsocialSupportWhoAndWhen | { account?: any; block?: any; time?: any } | string | Uint8Array, owner: AccountId32 | string | Uint8Array, content: SubsocialSupportContent | { None: any } | { Other: any } | { IPFS: any } | string | Uint8Array, hidden: bool | boolean | Uint8Array, permissionsOpt: Option<PalletPermissionsSpacePermissions> | null | Uint8Array | PalletPermissionsSpacePermissions | { none?: any; everyone?: any; follower?: any; spaceOwner?: any } | string) => SubmittableExtrinsic<ApiType>, [u64, SubsocialSupportWhoAndWhen, AccountId32, SubsocialSupportContent, bool, Option<PalletPermissionsSpacePermissions>]>;
Severity: Minor
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 1 other location - About 55 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 656..656

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 53.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      setHeapPages: AugmentedSubmittable<(pages: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      setCandidacyBond: AugmentedSubmittable<(bond: u128 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u128]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      fillBlock: AugmentedSubmittable<(ratio: Perbill | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [Perbill]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      updateResumeThreshold: AugmentedSubmittable<(updated: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      updateSuspendThreshold: AugmentedSubmittable<(updated: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      updateThresholdWeight: AugmentedSubmittable<(updated: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      updateWeightRestrictDecay: AugmentedSubmittable<(updated: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      updateDropThreshold: AugmentedSubmittable<(updated: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 142..142
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      setDesiredCandidates: AugmentedSubmittable<(max: u32 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u32]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 45 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 136..136
packages/definitions/src/interfaces/augment-api-tx.ts on lines 720..720
packages/definitions/src/interfaces/augment-api-tx.ts on lines 774..774
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1027..1027
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1035..1035
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1043..1043
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1050..1050
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1058..1058

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      updateXcmpMaxIndividualWeight: AugmentedSubmittable<(updated: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Minor
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 2 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 211..211
packages/definitions/src/interfaces/augment-api-tx.ts on lines 587..587

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      remarkWithEvent: AugmentedSubmittable<(remark: Bytes | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [Bytes]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 3 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 739..739
packages/definitions/src/interfaces/augment-api-tx.ts on lines 758..758
packages/definitions/src/interfaces/augment-api-tx.ts on lines 770..770

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      deleteRole: AugmentedSubmittable<(roleId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Minor
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 2 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 211..211
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1066..1066

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      remark: AugmentedSubmittable<(remark: Bytes | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [Bytes]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 3 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 743..743
packages/definitions/src/interfaces/augment-api-tx.ts on lines 758..758
packages/definitions/src/interfaces/augment-api-tx.ts on lines 770..770

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      setCode: AugmentedSubmittable<(code: Bytes | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [Bytes]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 3 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 739..739
packages/definitions/src/interfaces/augment-api-tx.ts on lines 743..743
packages/definitions/src/interfaces/augment-api-tx.ts on lines 770..770

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      setCodeWithoutChecks: AugmentedSubmittable<(code: Bytes | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [Bytes]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 3 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 739..739
packages/definitions/src/interfaces/augment-api-tx.ts on lines 743..743
packages/definitions/src/interfaces/augment-api-tx.ts on lines 758..758

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      updateValueCoefficient: AugmentedSubmittable<(newCoefficient: i64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [i64]>;
Severity: Minor
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 2 other locations - About 40 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 587..587
packages/definitions/src/interfaces/augment-api-tx.ts on lines 1066..1066

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      setProfile: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      followSpace: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      unfollowSpace: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      rejectPendingOwnership: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      acceptPendingOwnership: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      forceSetNextSpaceId: AugmentedSubmittable<(spaceId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      forceSetNextReactionId: AugmentedSubmittable<(reactionId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      forceRemovePost: AugmentedSubmittable<(postId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 362..362
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

      forceSetNextPostId: AugmentedSubmittable<(postId: u64 | AnyNumber | Uint8Array) => SubmittableExtrinsic<ApiType>, [u64]>;
Severity: Major
Found in packages/definitions/src/interfaces/augment-api-tx.ts and 8 other locations - About 35 mins to fix
packages/definitions/src/interfaces/augment-api-tx.ts on lines 361..361
packages/definitions/src/interfaces/augment-api-tx.ts on lines 369..369
packages/definitions/src/interfaces/augment-api-tx.ts on lines 570..570
packages/definitions/src/interfaces/augment-api-tx.ts on lines 646..646
packages/definitions/src/interfaces/augment-api-tx.ts on lines 648..648
packages/definitions/src/interfaces/augment-api-tx.ts on lines 651..651
packages/definitions/src/interfaces/augment-api-tx.ts on lines 652..652
packages/definitions/src/interfaces/augment-api-tx.ts on lines 658..658

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

There are no issues that match your filters.

Category
Status