Sign upLogin

oppia/oppia

View on GitHub
Star
extensions/objects/templates/image-with-regions-editor.component.spec.ts

Summary

Maintainability
F
1 wk
Test Coverage

File image-with-regions-editor.component.spec.ts has 1345 lines of code (exceeds 250 allowed). Consider refactoring.
Open

// Copyright 2021 The Oppia Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
Severity: Major
Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts - About 3 days to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      it(
    'should get new location of region when user is dragging the' +
      ' region diagonally down',
    () => {
      spyOn(Element.prototype, 'querySelectorAll').and.callFake(
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 1 other location - About 2 days to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 565..622

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 428.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      it(
    'should get new location of region when user is dragging the' +
      ' region diagonally up',
    () => {
      spyOn(Element.prototype, 'querySelectorAll').and.callFake(
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 1 other location - About 2 days to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 507..563

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 428.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      it(
    'should not track x and y direction changes' +
      ' while user is dragging the region',
    () => {
      component.xDirection = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 1 other location - About 3 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1275..1290

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 105.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      it(
    'should not track x and y direction changes' +
      ' while user is resizing the region',
    () => {
      component.xDirection = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 1 other location - About 3 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1258..1273

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 105.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          expect(component.value).toEqual({
        imagePath: 'img_20210627_214959_mwljsqraka_height_691_width_392.svg',
        labeledRegions: [
          {
            label: 'Region1',
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 3 hrs to fix
    extensions/interactions/ImageClickInput/directives/oppia-interactive-image-click-input.component.spec.ts on lines 162..186
    extensions/interactions/ImageClickInput/directives/oppia-interactive-image-click-input.component.spec.ts on lines 271..295

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 95.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          expect(component.value.labeledRegions).toEqual([
        {
          label: 'Region1',
          region: {
            regionType: 'Rectangle',
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 2 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 849..870
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1296..1317

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 88.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        expect(component.value.labeledRegions).toEqual([
      {
        label: 'Region1',
        region: {
          regionType: 'Rectangle',
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 2 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 849..870
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1344..1365

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 88.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        expect(component.value.labeledRegions).toEqual([
      {
        label: 'Region1',
        region: {
          regionType: 'Rectangle',
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 2 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1296..1317
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1344..1365

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 88.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      it(
    'should display slanted (225deg) cursor style when user is resizing' +
      'ysing the bottom right corner of the region',
    () => {
      component.xDirection = 1;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 2 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1436..1447
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1449..1460

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 83.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      it(
    "should display 's-resize' cursor style when user is resizing" +
      'the region using the bottom side of the region',
    () => {
      component.xDirection = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 2 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1386..1397
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1449..1460

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 83.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      it(
    "should display 'e-resize' cursor style when user is resizing" +
      'the region using the right side of the region',
    () => {
      component.xDirection = 1;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 2 other locations - About 2 hrs to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1386..1397
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1436..1447

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 83.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 5 locations. Consider refactoring.
    Open

      beforeEach(async(() => {
    TestBed.configureTestingModule({
      imports: [HttpClientTestingModule],
      declarations: [ImageWithRegionsEditorComponent],
      providers: [
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 4 other locations - About 2 hrs to fix
    core/templates/components/question-directives/question-misconception-editor/tag-misconception-modal-component.spec.ts on lines 49..62
    core/templates/pages/email-dashboard-pages/email-dashboard-result.component.spec.ts on lines 47..60
    core/templates/pages/exploration-player-page/learner-experience/learner-answer-info-card.component.spec.ts on lines 41..54
    core/templates/pages/skill-editor-page/modal-templates/add-worked-example.component.spec.ts on lines 40..53

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

          expect(component.value.labeledRegions).toEqual([
        {
          label: 'Region2',
          region: {
            regionType: 'Rectangle',
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 1 other location - About 1 hr to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1323..1334

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        expect(component.value.labeledRegions).toEqual([
      {
        label: 'Region1',
        region: {
          regionType: 'Rectangle',
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 1 other location - About 1 hr to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 1371..1382

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 4 locations. Consider refactoring.
    Open

      it(
    'should return default trash icon css styling for the trash icon' +
      ' when a region is not selected',
    () => {
      component.selectedRegion = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 3 other locations - About 50 mins to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 340..350
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 352..360
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 372..382

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 51.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 4 locations. Consider refactoring.
    Open

      it(
    'should return default region css styling for the rectangle' +
      ' when a region is not selected',
    () => {
      component.selectedRegion = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 3 other locations - About 50 mins to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 352..360
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 362..370
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 372..382

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 51.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 4 locations. Consider refactoring.
    Open

      it(
    'should return selected region trash icon css styling' +
      ' when a region is selected',
    () => {
      component.selectedRegion = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 3 other locations - About 50 mins to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 340..350
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 362..370
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 372..382

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 51.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 4 locations. Consider refactoring.
    Open

      it(
    'should return region label css styling for a selected region' +
      ' when a region is selected',
    () => {
      component.selectedRegion = 0;
    Severity: Major
    Found in extensions/objects/templates/image-with-regions-editor.component.spec.ts and 3 other locations - About 50 mins to fix
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 340..350
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 352..360
    extensions/objects/templates/image-with-regions-editor.component.spec.ts on lines 362..370

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 51.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    There are no issues that match your filters.

    Category
    Status