for a_vars_file in $(ls ./config-manifest/*${VARS_FILES_SUFFIX}); do

Close

Iterating over ls output is fragile. Use globs.

Problematic code:

for f in $(ls *.wav)
do
  echo "$f"
done

Correct code:

for f in *.wav
do
  [[ -e $f ]] || break  # handle the case of no *.wav files
  echo "$f"
done

Also note that in Bash, shopt -s nullglob will allow the loop to run 0 times instead of 1 if there are no matches. There are also several other conditions to be aware of.

Rationale:

When looping over a set of files, it's always better to use globs when possible. Using command expansion causes word splitting and glob expansion, which will cause problems for certain filenames (typically first seen when trying to process a file with spaces in the name).

The following files can or will break the first loop:

touch 'filename with spaces.wav'
touch 'filename with * globs.wav'
touch 'More_Globs[2003].wav'
touch 'files_with_fønny_chæracters_in_certain_locales.wav'

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

for an_ops_file in $(ls ./config-manifest/*${OPS_FILES_SUFFIX}); do

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

bosh -n int ${VARS_FILES} ${OPS_FILES} "config-manifest/${CONFIG_TYPE}-config.yml" > "${BOSH_INTERPOLATED_FILE}"

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

for a_vars_file in $(ls ./config-manifest/*${VARS_FILES_SUFFIX}); do

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

for an_ops_file in $(ls ./config-manifest/*${OPS_FILES_SUFFIX}); do

Close

Iterating over ls output is fragile. Use globs.

Problematic code:

for f in $(ls *.wav)
do
  echo "$f"
done

Correct code:

for f in *.wav
do
  [[ -e $f ]] || break  # handle the case of no *.wav files
  echo "$f"
done

Also note that in Bash, shopt -s nullglob will allow the loop to run 0 times instead of 1 if there are no matches. There are also several other conditions to be aware of.

Rationale:

When looping over a set of files, it's always better to use globs when possible. Using command expansion causes word splitting and glob expansion, which will cause problems for certain filenames (typically first seen when trying to process a file with spaces in the name).

The following files can or will break the first loop:

touch 'filename with spaces.wav'
touch 'filename with * globs.wav'
touch 'More_Globs[2003].wav'
touch 'files_with_fønny_chæracters_in_certain_locales.wav'

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

bosh -n int ${VARS_FILES} ${OPS_FILES} "config-manifest/${CONFIG_TYPE}-config.yml" > "${BOSH_INTERPOLATED_FILE}"

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

source ./scripts-resource/scripts/bosh_cli_v2_login.sh "${BOSH_TARGET}"

Close

Not following: (error message here)

Reasons include: file not found, no permissions, not included on the command line, not allowing shellcheck to follow files with -x, etc.

Problematic code:

source somefile

Correct code:

# shellcheck disable=SC1091
source somefile

Rationale:

ShellCheck, for whichever reason, is not able to access the source file.

This could be because you did not include it on the command line, did not use shellcheck -x to allow following other files, don't have permissions or a variety of other problems.

Feel free to ignore the error with a [[directive]].

Exceptions:

If you're fine with it, ignore the message with a [[directive]].

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.