Sign upLogin

ory-am/hydra

View on GitHub
Star

Showing 446 of 850 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                    t.Run("should fail token refresh with `access_denied` if legacy refresh hook denied the request", func(t *testing.T) {
                        run := func(hookType string) func(t *testing.T) {
                            return func(t *testing.T) {
                                hs := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
                                    w.WriteHeader(http.StatusForbidden)
Severity: Major
Found in oauth2/oauth2_auth_code_test.go and 2 other locations - About 6 hrs to fix
oauth2/oauth2_auth_code_test.go on lines 1760..1788
oauth2/oauth2_auth_code_test.go on lines 1820..1848

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 428.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                    t.Run("should fail token refresh with `server_error` if refresh hook fails", func(t *testing.T) {
                        run := func(hookType string) func(t *testing.T) {
                            return func(t *testing.T) {
                                hs := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
                                    w.WriteHeader(http.StatusInternalServerError)
Severity: Major
Found in oauth2/oauth2_auth_code_test.go and 2 other locations - About 6 hrs to fix
oauth2/oauth2_auth_code_test.go on lines 1790..1818
oauth2/oauth2_auth_code_test.go on lines 1820..1848

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 428.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                    t.Run("should fail token refresh with `server_error` if refresh hook response is malformed", func(t *testing.T) {
                        run := func(hookType string) func(t *testing.T) {
                            return func(t *testing.T) {
                                hs := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
                                    w.WriteHeader(http.StatusOK)
Severity: Major
Found in oauth2/oauth2_auth_code_test.go and 2 other locations - About 6 hrs to fix
oauth2/oauth2_auth_code_test.go on lines 1760..1788
oauth2/oauth2_auth_code_test.go on lines 1790..1818

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 428.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestDeleteRefreshTokenSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 2 other locations - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 670..692
persistence/sql/persister_nid_test.go on lines 694..716

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 419.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestDeletePKCERequestSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 2 other locations - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 670..692
persistence/sql/persister_nid_test.go on lines 718..740

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 419.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestDeleteOpenIDConnectSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 2 other locations - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 694..716
persistence/sql/persister_nid_test.go on lines 718..740

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 419.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestGetOpenIDConnectSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 2 other locations - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 1285..1307
persistence/sql/persister_nid_test.go on lines 1382..1404

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 394.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestGetRefreshTokenSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 2 other locations - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 1261..1283
persistence/sql/persister_nid_test.go on lines 1285..1307

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 394.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestGetPKCERequestSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 2 other locations - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 1261..1283
persistence/sql/persister_nid_test.go on lines 1382..1404

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 394.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    t.Run("case=should be able to retry both accept login and consent requests", func(t *testing.T) {
        subject := "aeneas-rekkas"
        c := createDefaultClient(t)
        testhelpers.NewLoginConsentUI(t, reg.Config(),
            checkAndDuplicateAcceptLoginHandler(t, adminClient, subject, func(*testing.T, *hydra.OAuth2LoginRequest, error) hydra.AcceptOAuth2LoginRequest {
Severity: Major
Found in consent/strategy_oauth_test.go and 1 other location - About 5 hrs to fix
consent/strategy_oauth_test.go on lines 1039..1065

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 389.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    t.Run("case=should be able to retry accept login request", func(t *testing.T) {
        subject := "aeneas-rekkas"
        c := createDefaultClient(t)
        testhelpers.NewLoginConsentUI(t, reg.Config(),
            checkAndDuplicateAcceptLoginHandler(t, adminClient, subject, func(*testing.T, *hydra.OAuth2LoginRequest, error) hydra.AcceptOAuth2LoginRequest {
Severity: Major
Found in consent/strategy_oauth_test.go and 1 other location - About 5 hrs to fix
consent/strategy_oauth_test.go on lines 1067..1093

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 389.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestCreateRefreshTokenSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 1 other location - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 500..520

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 378.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestCreatePKCERequestSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 1 other location - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 522..541

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 378.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestGetAuthorizeCodeSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 1 other location - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 948..968

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 374.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (s *PersisterTestSuite) TestGetAccessTokenSession() {
    t := s.T()
    for k, r := range s.registries {
        t.Run(k, func(t *testing.T) {
            client := &client.Client{ID: "client-id"}
Severity: Major
Found in persistence/sql/persister_nid_test.go and 1 other location - About 5 hrs to fix
persistence/sql/persister_nid_test.go on lines 970..990

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 374.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func RunServePublic(slOpts []servicelocatorx.Option, dOpts []driver.OptionsModifier, cOpts []configx.OptionModifier) func(cmd *cobra.Command, args []string) error {
    return func(cmd *cobra.Command, args []string) error {
        ctx := cmd.Context()
        sl := servicelocatorx.NewOptions(slOpts...)
Severity: Major
Found in cmd/server/handler.go and 1 other location - About 5 hrs to fix
cmd/server/handler.go on lines 80..111

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 373.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func RunServeAdmin(slOpts []servicelocatorx.Option, dOpts []driver.OptionsModifier, cOpts []configx.OptionModifier) func(cmd *cobra.Command, args []string) error {
    return func(cmd *cobra.Command, args []string) error {
        ctx := cmd.Context()
        sl := servicelocatorx.NewOptions(slOpts...)
Severity: Major
Found in cmd/server/handler.go and 1 other location - About 5 hrs to fix
cmd/server/handler.go on lines 113..144

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 373.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        t.Run("case=flush-consent-request-timeout", func(t *testing.T) {
            jt := NewConsentJanitorTestHelper(network + "loginTimeout")

            t.Run(fmt.Sprintf("case=%s", "login-timeout"), func(t *testing.T) {
Severity: Major
Found in internal/testhelpers/janitor_test_helper.go and 1 other location - About 4 hrs to fix
internal/testhelpers/janitor_test_helper.go on lines 609..640

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 365.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        t.Run("case=flush-consent-request-rejection", func(t *testing.T) {
            jt := NewConsentJanitorTestHelper(network + "loginRejection")

            t.Run(fmt.Sprintf("case=%s", "loginRejection"), func(t *testing.T) {
                // setup
Severity: Major
Found in internal/testhelpers/janitor_test_helper.go and 1 other location - About 4 hrs to fix
internal/testhelpers/janitor_test_helper.go on lines 642..676

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 365.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (!skipLogin) {
        cy.get("#email").type(username, { delay: 1 })
        cy.get("#password").type(password, { delay: 1 })

        if (rememberLogin) {
Severity: Major
Found in cypress/support/commands.js and 1 other location - About 4 hrs to fix
cypress/support/commands.js on lines 147..160

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 133.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language