Showing 119 of 119 total issues
Similar blocks of code found in 10 locations. Consider refactoring. Open
{ value: [
'Bran',
[ { name: 'Bran', gender: 'm', house: 'Stark', age: 8 } ],
'',
'',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 10 locations. Consider refactoring. Open
{ value: [
'Sansa',
[ { name: 'Sansa', gender: 'f', house: 'Stark', age: 12 } ],
'',
'',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 10 locations. Consider refactoring. Open
{ value: [
'Sansa',
[ { name: 'Sansa', gender: 'f', house: 'Stark', age: 12 } ],
'',
'',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
{ value: ['Joffrey', '', [{ name: 'Joffrey', gender: 'm', house: 'Baratheon', age: 18 }], ''], type: 'data', depth: 1 },
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 6 locations. Consider refactoring. Open
{ value: ['Tyrion', '', '', [{ name: 'Tyrion', gender: 'm', house: 'Lannister', age: 34 }]], type: 'data', depth: 1 },
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 6 locations. Consider refactoring. Open
{ value: [
'Tywin',
'',
'',
[ { name: 'Tywin', gender: 'm', house: 'Lannister', age: 67 } ],
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 6 locations. Consider refactoring. Open
it('count', () => {
const accumulatedResults = accumulator(data, 'age', 'count');
expect(accumulatedResults).to.equal(8);
});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
pivot.filter('name', ['Cersei'], 'exclude')
.filter('name', ['Jaime'], 'exclude')
.collapse(1)
.filter('name', ['Tywin'], 'exclude');
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
{ value: [
'Joffrey',
'',
[ { name: 'Joffrey', gender: 'm', house: 'Baratheon', age: 18 } ],
'',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid too many return
statements within this function. Open
return acc;
Function collapse
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
export function collapse(rowNum, data) {
/** get the current row, row type, and row depth */
const selectedRow = data.table[rowNum];
const {type, depth} = selectedRow;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Expected blank line after variable declarations. Open
const pivot = create();
- Read upRead up
- Exclude checks
require or disallow an empty line after variable declarations (newline-after-var)
As of today there is no consistency in separating variable declarations from the rest of the code. Some developers leave an empty line between var statements and the rest of the code like:
var foo;
// do something with foo
Whereas others don't leave any empty newlines at all.
var foo;
// do something with foo
The problem is when these developers work together in a project. This rule enforces a coding style where empty newlines are allowed or disallowed after var
, let
, or const
statements. It helps the code to look consistent across the entire project.
Rule Details
This rule enforces a coding style where empty lines are required or disallowed after var
, let
, or const
statements to achieve a consistent coding style across the project.
Options
This rule has a string option:
-
"always"
(default) requires an empty line aftervar
,let
, orconst
Comments on a line directly after var statements are treated like additional var statements.
-
"never"
disallows empty lines aftervar
,let
, orconst
always
Examples of incorrect code for this rule with the default "always"
option:
/*eslint newline-after-var: ["error", "always"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
Examples of correct code for this rule with the default "always"
option:
/*eslint newline-after-var: ["error", "always"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
never
Examples of incorrect code for this rule with the "never"
option:
/*eslint newline-after-var: ["error", "never"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
Examples of correct code for this rule with the "never"
option:
/*eslint newline-after-var: ["error", "never"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
Source: http://eslint.org/docs/rules/
Expected indentation of 6 spaces but found 4. Open
const pivot = new Pivot(
- Read upRead up
- Exclude checks
enforce consistent indentation (indent)
There are several common guidelines which require specific indentation of nested blocks and statements, like:
function hello(indentSize, type) {
if (indentSize === 4 && type !== 'tab') {
console.log('Each next indentation will increase on 4 spaces');
}
}
These are the most common scenarios recommended in different style guides:
- Two spaces, not longer and no tabs: Google, npm, Node.js, Idiomatic, Felix
- Tabs: jQuery
- Four spaces: Crockford
Rule Details
This rule enforces a consistent indentation style. The default style is 4 spaces
.
Options
This rule has a mixed option:
For example, for 2-space indentation:
{
"indent": ["error", 2]
}
Or for tabbed indentation:
{
"indent": ["error", "tab"]
}
Examples of incorrect code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
This rule has an object option:
-
"SwitchCase"
(default: 0) enforces indentation level forcase
clauses inswitch
statements -
"VariableDeclarator"
(default: 1) enforces indentation level forvar
declarators; can also take an object to define separate rules forvar
,let
andconst
declarations. -
"outerIIFEBody"
(default: 1) enforces indentation level for file-level IIFEs. -
"MemberExpression"
(off by default) enforces indentation level for multi-line property chains (except in variable declarations and assignments) -
"FunctionDeclaration"
takes an object to define rules for function declarations.-
parameters
(off by default) enforces indentation level for parameters in a function declaration. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the declaration must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function declaration.
-
-
"FunctionExpression"
takes an object to define rules for function expressions.-
parameters
(off by default) enforces indentation level for parameters in a function expression. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the expression must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function expression.
-
-
"CallExpression"
takes an object to define rules for function call expressions.-
arguments
(off by default) enforces indentation level for arguments in a call expression. This can either be a number indicating indentation level, or the string"first"
indicating that all arguments of the expression must be aligned with the first argument.
-
-
"ArrayExpression"
(default: 1) enforces indentation level for elements in arrays. It can also be set to the string"first"
, indicating that all the elements in the array should be aligned with the first element. -
"ObjectExpression"
(default: 1) enforces indentation level for properties in objects. It can be set to the string"first"
, indicating that all properties in the object should be aligned with the first property.
Level of indentation denotes the multiple of the indent specified. Example:
- Indent of 4 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 8 spaces. - Indent of 2 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 4 spaces. - Indent of 2 spaces with
VariableDeclarator
set to{"var": 2, "let": 2, "const": 3}
will indent the multi-line variable declarations with 4 spaces forvar
andlet
, 6 spaces forconst
statements. - Indent of tab with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 2 tabs. - Indent of 2 spaces with
SwitchCase
set to0
will not indentcase
clauses with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to1
will indentcase
clauses with 2 spaces with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to2
will indentcase
clauses with 4 spaces with respect toswitch
statements. - Indent of tab with
SwitchCase
set to2
will indentcase
clauses with 2 tabs with respect toswitch
statements. - Indent of 2 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 2 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 2 spaces. - Indent of 2 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 4 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 8 spaces.
tab
Examples of incorrect code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
/*tab*/b=c;
/*tab*/function foo(d) {
/*tab*//*tab*/e=f;
/*tab*/}
}
SwitchCase
Examples of incorrect code for this rule with the 2, { "SwitchCase": 1 }
options:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
Examples of correct code for this rule with the 2, { "SwitchCase": 1 }
option:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
VariableDeclarator
Examples of incorrect code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 2 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 2 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
outerIIFEBody
Examples of incorrect code for this rule with the options 2, { "outerIIFEBody": 0 }
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
Examples of correct code for this rule with the options 2, {"outerIIFEBody": 0}
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
MemberExpression
Examples of incorrect code for this rule with the 2, { "MemberExpression": 1 }
options:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz()
Examples of correct code for this rule with the 2, { "MemberExpression": 1 }
option:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz();
// Any indentation is permitted in variable declarations and assignments.
var bip = aardvark.badger
.coyote;
FunctionDeclaration
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
FunctionExpression
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
CallExpression
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
ArrayExpression
Examples of incorrect code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of incorrect code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
ObjectExpression
Examples of incorrect code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of correct code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of incorrect code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Examples of correct code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Compatibility
-
JSHint:
indent
- JSCS: validateIndentation Source: http://eslint.org/docs/rules/
Expected indentation of 4 spaces but found 2. Open
});
- Read upRead up
- Exclude checks
enforce consistent indentation (indent)
There are several common guidelines which require specific indentation of nested blocks and statements, like:
function hello(indentSize, type) {
if (indentSize === 4 && type !== 'tab') {
console.log('Each next indentation will increase on 4 spaces');
}
}
These are the most common scenarios recommended in different style guides:
- Two spaces, not longer and no tabs: Google, npm, Node.js, Idiomatic, Felix
- Tabs: jQuery
- Four spaces: Crockford
Rule Details
This rule enforces a consistent indentation style. The default style is 4 spaces
.
Options
This rule has a mixed option:
For example, for 2-space indentation:
{
"indent": ["error", 2]
}
Or for tabbed indentation:
{
"indent": ["error", "tab"]
}
Examples of incorrect code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
This rule has an object option:
-
"SwitchCase"
(default: 0) enforces indentation level forcase
clauses inswitch
statements -
"VariableDeclarator"
(default: 1) enforces indentation level forvar
declarators; can also take an object to define separate rules forvar
,let
andconst
declarations. -
"outerIIFEBody"
(default: 1) enforces indentation level for file-level IIFEs. -
"MemberExpression"
(off by default) enforces indentation level for multi-line property chains (except in variable declarations and assignments) -
"FunctionDeclaration"
takes an object to define rules for function declarations.-
parameters
(off by default) enforces indentation level for parameters in a function declaration. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the declaration must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function declaration.
-
-
"FunctionExpression"
takes an object to define rules for function expressions.-
parameters
(off by default) enforces indentation level for parameters in a function expression. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the expression must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function expression.
-
-
"CallExpression"
takes an object to define rules for function call expressions.-
arguments
(off by default) enforces indentation level for arguments in a call expression. This can either be a number indicating indentation level, or the string"first"
indicating that all arguments of the expression must be aligned with the first argument.
-
-
"ArrayExpression"
(default: 1) enforces indentation level for elements in arrays. It can also be set to the string"first"
, indicating that all the elements in the array should be aligned with the first element. -
"ObjectExpression"
(default: 1) enforces indentation level for properties in objects. It can be set to the string"first"
, indicating that all properties in the object should be aligned with the first property.
Level of indentation denotes the multiple of the indent specified. Example:
- Indent of 4 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 8 spaces. - Indent of 2 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 4 spaces. - Indent of 2 spaces with
VariableDeclarator
set to{"var": 2, "let": 2, "const": 3}
will indent the multi-line variable declarations with 4 spaces forvar
andlet
, 6 spaces forconst
statements. - Indent of tab with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 2 tabs. - Indent of 2 spaces with
SwitchCase
set to0
will not indentcase
clauses with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to1
will indentcase
clauses with 2 spaces with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to2
will indentcase
clauses with 4 spaces with respect toswitch
statements. - Indent of tab with
SwitchCase
set to2
will indentcase
clauses with 2 tabs with respect toswitch
statements. - Indent of 2 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 2 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 2 spaces. - Indent of 2 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 4 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 8 spaces.
tab
Examples of incorrect code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
/*tab*/b=c;
/*tab*/function foo(d) {
/*tab*//*tab*/e=f;
/*tab*/}
}
SwitchCase
Examples of incorrect code for this rule with the 2, { "SwitchCase": 1 }
options:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
Examples of correct code for this rule with the 2, { "SwitchCase": 1 }
option:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
VariableDeclarator
Examples of incorrect code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 2 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 2 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
outerIIFEBody
Examples of incorrect code for this rule with the options 2, { "outerIIFEBody": 0 }
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
Examples of correct code for this rule with the options 2, {"outerIIFEBody": 0}
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
MemberExpression
Examples of incorrect code for this rule with the 2, { "MemberExpression": 1 }
options:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz()
Examples of correct code for this rule with the 2, { "MemberExpression": 1 }
option:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz();
// Any indentation is permitted in variable declarations and assignments.
var bip = aardvark.badger
.coyote;
FunctionDeclaration
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
FunctionExpression
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
CallExpression
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
ArrayExpression
Examples of incorrect code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of incorrect code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
ObjectExpression
Examples of incorrect code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of correct code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of incorrect code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Examples of correct code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Compatibility
-
JSHint:
indent
- JSCS: validateIndentation Source: http://eslint.org/docs/rules/
Expected indentation of 6 spaces but found 4. Open
expect(pivot.data.table).to.deep.equal(expected);
- Read upRead up
- Exclude checks
enforce consistent indentation (indent)
There are several common guidelines which require specific indentation of nested blocks and statements, like:
function hello(indentSize, type) {
if (indentSize === 4 && type !== 'tab') {
console.log('Each next indentation will increase on 4 spaces');
}
}
These are the most common scenarios recommended in different style guides:
- Two spaces, not longer and no tabs: Google, npm, Node.js, Idiomatic, Felix
- Tabs: jQuery
- Four spaces: Crockford
Rule Details
This rule enforces a consistent indentation style. The default style is 4 spaces
.
Options
This rule has a mixed option:
For example, for 2-space indentation:
{
"indent": ["error", 2]
}
Or for tabbed indentation:
{
"indent": ["error", "tab"]
}
Examples of incorrect code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
This rule has an object option:
-
"SwitchCase"
(default: 0) enforces indentation level forcase
clauses inswitch
statements -
"VariableDeclarator"
(default: 1) enforces indentation level forvar
declarators; can also take an object to define separate rules forvar
,let
andconst
declarations. -
"outerIIFEBody"
(default: 1) enforces indentation level for file-level IIFEs. -
"MemberExpression"
(off by default) enforces indentation level for multi-line property chains (except in variable declarations and assignments) -
"FunctionDeclaration"
takes an object to define rules for function declarations.-
parameters
(off by default) enforces indentation level for parameters in a function declaration. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the declaration must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function declaration.
-
-
"FunctionExpression"
takes an object to define rules for function expressions.-
parameters
(off by default) enforces indentation level for parameters in a function expression. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the expression must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function expression.
-
-
"CallExpression"
takes an object to define rules for function call expressions.-
arguments
(off by default) enforces indentation level for arguments in a call expression. This can either be a number indicating indentation level, or the string"first"
indicating that all arguments of the expression must be aligned with the first argument.
-
-
"ArrayExpression"
(default: 1) enforces indentation level for elements in arrays. It can also be set to the string"first"
, indicating that all the elements in the array should be aligned with the first element. -
"ObjectExpression"
(default: 1) enforces indentation level for properties in objects. It can be set to the string"first"
, indicating that all properties in the object should be aligned with the first property.
Level of indentation denotes the multiple of the indent specified. Example:
- Indent of 4 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 8 spaces. - Indent of 2 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 4 spaces. - Indent of 2 spaces with
VariableDeclarator
set to{"var": 2, "let": 2, "const": 3}
will indent the multi-line variable declarations with 4 spaces forvar
andlet
, 6 spaces forconst
statements. - Indent of tab with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 2 tabs. - Indent of 2 spaces with
SwitchCase
set to0
will not indentcase
clauses with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to1
will indentcase
clauses with 2 spaces with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to2
will indentcase
clauses with 4 spaces with respect toswitch
statements. - Indent of tab with
SwitchCase
set to2
will indentcase
clauses with 2 tabs with respect toswitch
statements. - Indent of 2 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 2 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 2 spaces. - Indent of 2 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 4 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 8 spaces.
tab
Examples of incorrect code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
/*tab*/b=c;
/*tab*/function foo(d) {
/*tab*//*tab*/e=f;
/*tab*/}
}
SwitchCase
Examples of incorrect code for this rule with the 2, { "SwitchCase": 1 }
options:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
Examples of correct code for this rule with the 2, { "SwitchCase": 1 }
option:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
VariableDeclarator
Examples of incorrect code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 2 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 2 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
outerIIFEBody
Examples of incorrect code for this rule with the options 2, { "outerIIFEBody": 0 }
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
Examples of correct code for this rule with the options 2, {"outerIIFEBody": 0}
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
MemberExpression
Examples of incorrect code for this rule with the 2, { "MemberExpression": 1 }
options:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz()
Examples of correct code for this rule with the 2, { "MemberExpression": 1 }
option:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz();
// Any indentation is permitted in variable declarations and assignments.
var bip = aardvark.badger
.coyote;
FunctionDeclaration
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
FunctionExpression
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
CallExpression
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
ArrayExpression
Examples of incorrect code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of incorrect code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
ObjectExpression
Examples of incorrect code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of correct code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of incorrect code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Examples of correct code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Compatibility
-
JSHint:
indent
- JSCS: validateIndentation Source: http://eslint.org/docs/rules/
Multiple spaces found before 'row'. Open
{ value: ['f', 22, 38, '', ''], depth: 0, type: 'rowHeader', row: 1 },
- Read upRead up
- Exclude checks
Disallow multiple spaces (no-multi-spaces)
Multiple spaces in a row that are not used for indentation are typically mistakes. For example:
if(foo === "bar") {}
It's hard to tell, but there are two spaces between foo
and ===
. Multiple spaces such as this are generally frowned upon in favor of single spaces:
if(foo === "bar") {}
Rule Details
This rule aims to disallow multiple whitespace around logical expressions, conditional expressions, declarations, array elements, object properties, sequences and function parameters.
Examples of incorrect code for this rule:
/*eslint no-multi-spaces: "error"*/
var a = 1;
if(foo === "bar") {}
a << b
var arr = [1, 2];
a ? b: c
Examples of correct code for this rule:
/*eslint no-multi-spaces: "error"*/
var a = 1;
if(foo === "bar") {}
a << b
var arr = [1, 2];
a ? b: c
Options
To avoid contradictions if some other rules require multiple spaces, this rule has an option to ignore certain node types in the abstract syntax tree (AST) of JavaScript code.
exceptions
The exceptions
object expects property names to be AST node types as defined by ESTree. The easiest way to determine the node types for exceptions
is to use the online demo.
Only the Property
node type is ignored by default, because for the [key-spacing](key-spacing.md) rule some alignment options require multiple spaces in properties of object literals.
Examples of correct code for the default "exceptions": { "Property": true }
option:
/*eslint no-multi-spaces: "error"*/
/*eslint key-spacing: ["error", { align: "value" }]*/
var obj = {
first: "first",
second: "second"
};
Examples of incorrect code for the "exceptions": { "Property": false }
option:
/*eslint no-multi-spaces: ["error", { exceptions: { "Property": false } }]*/
/*eslint key-spacing: ["error", { align: "value" }]*/
var obj = {
first: "first",
second: "second"
};
Examples of correct code for the "exceptions": { "BinaryExpression": true }
option:
/*eslint no-multi-spaces: ["error", { exceptions: { "BinaryExpression": true } }]*/
var a = 1 * 2;
Examples of correct code for the "exceptions": { "VariableDeclarator": true }
option:
/*eslint no-multi-spaces: ["error", { exceptions: { "VariableDeclarator": true } }]*/
var someVar = 'foo';
var someOtherVar = 'barBaz';
Examples of correct code for the "exceptions": { "ImportDeclaration": true }
option:
/*eslint no-multi-spaces: ["error", { exceptions: { "ImportDeclaration": true } }]*/
import mod from 'mod';
import someOtherMod from 'some-other-mod';
When Not To Use It
If you don't want to check and disallow multiple spaces, then you should turn this rule off.
Related Rules
- [key-spacing](key-spacing.md)
- [space-infix-ops](space-infix-ops.md)
- [space-in-brackets](space-in-brackets.md) (deprecated)
- [space-in-parens](space-in-parens.md)
- [space-after-keywords](space-after-keywords)
- [space-unary-ops](space-unary-ops)
- [space-return-throw-case](space-return-throw-case) Source: http://eslint.org/docs/rules/
Expected blank line after variable declarations. Open
const pivot = create();
- Read upRead up
- Exclude checks
require or disallow an empty line after variable declarations (newline-after-var)
As of today there is no consistency in separating variable declarations from the rest of the code. Some developers leave an empty line between var statements and the rest of the code like:
var foo;
// do something with foo
Whereas others don't leave any empty newlines at all.
var foo;
// do something with foo
The problem is when these developers work together in a project. This rule enforces a coding style where empty newlines are allowed or disallowed after var
, let
, or const
statements. It helps the code to look consistent across the entire project.
Rule Details
This rule enforces a coding style where empty lines are required or disallowed after var
, let
, or const
statements to achieve a consistent coding style across the project.
Options
This rule has a string option:
-
"always"
(default) requires an empty line aftervar
,let
, orconst
Comments on a line directly after var statements are treated like additional var statements.
-
"never"
disallows empty lines aftervar
,let
, orconst
always
Examples of incorrect code for this rule with the default "always"
option:
/*eslint newline-after-var: ["error", "always"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
Examples of correct code for this rule with the default "always"
option:
/*eslint newline-after-var: ["error", "always"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
never
Examples of incorrect code for this rule with the "never"
option:
/*eslint newline-after-var: ["error", "never"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
Examples of correct code for this rule with the "never"
option:
/*eslint newline-after-var: ["error", "never"]*/
/*eslint-env es6*/
var greet = "hello,",
name = "world";
console.log(greet, name);
let greet = "hello,",
name = "world";
console.log(greet, name);
var greet = "hello,";
const NAME = "world";
console.log(greet, NAME);
var greet = "hello,";
var name = "world";
// var name = require("world");
console.log(greet, name);
Source: http://eslint.org/docs/rules/
Expected indentation of 6 spaces but found 4. Open
const expected = [
- Read upRead up
- Exclude checks
enforce consistent indentation (indent)
There are several common guidelines which require specific indentation of nested blocks and statements, like:
function hello(indentSize, type) {
if (indentSize === 4 && type !== 'tab') {
console.log('Each next indentation will increase on 4 spaces');
}
}
These are the most common scenarios recommended in different style guides:
- Two spaces, not longer and no tabs: Google, npm, Node.js, Idiomatic, Felix
- Tabs: jQuery
- Four spaces: Crockford
Rule Details
This rule enforces a consistent indentation style. The default style is 4 spaces
.
Options
This rule has a mixed option:
For example, for 2-space indentation:
{
"indent": ["error", 2]
}
Or for tabbed indentation:
{
"indent": ["error", "tab"]
}
Examples of incorrect code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the default options:
/*eslint indent: "error"*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
This rule has an object option:
-
"SwitchCase"
(default: 0) enforces indentation level forcase
clauses inswitch
statements -
"VariableDeclarator"
(default: 1) enforces indentation level forvar
declarators; can also take an object to define separate rules forvar
,let
andconst
declarations. -
"outerIIFEBody"
(default: 1) enforces indentation level for file-level IIFEs. -
"MemberExpression"
(off by default) enforces indentation level for multi-line property chains (except in variable declarations and assignments) -
"FunctionDeclaration"
takes an object to define rules for function declarations.-
parameters
(off by default) enforces indentation level for parameters in a function declaration. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the declaration must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function declaration.
-
-
"FunctionExpression"
takes an object to define rules for function expressions.-
parameters
(off by default) enforces indentation level for parameters in a function expression. This can either be a number indicating indentation level, or the string"first"
indicating that all parameters of the expression must be aligned with the first parameter. -
body
(default: 1) enforces indentation level for the body of a function expression.
-
-
"CallExpression"
takes an object to define rules for function call expressions.-
arguments
(off by default) enforces indentation level for arguments in a call expression. This can either be a number indicating indentation level, or the string"first"
indicating that all arguments of the expression must be aligned with the first argument.
-
-
"ArrayExpression"
(default: 1) enforces indentation level for elements in arrays. It can also be set to the string"first"
, indicating that all the elements in the array should be aligned with the first element. -
"ObjectExpression"
(default: 1) enforces indentation level for properties in objects. It can be set to the string"first"
, indicating that all properties in the object should be aligned with the first property.
Level of indentation denotes the multiple of the indent specified. Example:
- Indent of 4 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 8 spaces. - Indent of 2 spaces with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 4 spaces. - Indent of 2 spaces with
VariableDeclarator
set to{"var": 2, "let": 2, "const": 3}
will indent the multi-line variable declarations with 4 spaces forvar
andlet
, 6 spaces forconst
statements. - Indent of tab with
VariableDeclarator
set to2
will indent the multi-line variable declarations with 2 tabs. - Indent of 2 spaces with
SwitchCase
set to0
will not indentcase
clauses with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to1
will indentcase
clauses with 2 spaces with respect toswitch
statements. - Indent of 2 spaces with
SwitchCase
set to2
will indentcase
clauses with 4 spaces with respect toswitch
statements. - Indent of tab with
SwitchCase
set to2
will indentcase
clauses with 2 tabs with respect toswitch
statements. - Indent of 2 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 2 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 2 spaces. - Indent of 2 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to0
will indent the multi-line property chains with 0 spaces. - Indent of 4 spaces with
MemberExpression
set to1
will indent the multi-line property chains with 4 spaces. - Indent of 4 spaces with
MemberExpression
set to2
will indent the multi-line property chains with 8 spaces.
tab
Examples of incorrect code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
b=c;
function foo(d) {
e=f;
}
}
Examples of correct code for this rule with the "tab"
option:
/*eslint indent: ["error", "tab"]*/
if (a) {
/*tab*/b=c;
/*tab*/function foo(d) {
/*tab*//*tab*/e=f;
/*tab*/}
}
SwitchCase
Examples of incorrect code for this rule with the 2, { "SwitchCase": 1 }
options:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
Examples of correct code for this rule with the 2, { "SwitchCase": 1 }
option:
/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/
switch(a){
case "a":
break;
case "b":
break;
}
VariableDeclarator
Examples of incorrect code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 1 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": 2 }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": 2 }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
Examples of correct code for this rule with the 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }
options:
/*eslint indent: ["error", 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }]*/
/*eslint-env es6*/
var a,
b,
c;
let a,
b,
c;
const a = 1,
b = 2,
c = 3;
outerIIFEBody
Examples of incorrect code for this rule with the options 2, { "outerIIFEBody": 0 }
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
Examples of correct code for this rule with the options 2, {"outerIIFEBody": 0}
:
/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/
(function() {
function foo(x) {
return x + 1;
}
})();
if(y) {
console.log('foo');
}
MemberExpression
Examples of incorrect code for this rule with the 2, { "MemberExpression": 1 }
options:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz()
Examples of correct code for this rule with the 2, { "MemberExpression": 1 }
option:
/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/
foo
.bar
.baz();
// Any indentation is permitted in variable declarations and assignments.
var bip = aardvark.badger
.coyote;
FunctionDeclaration
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/
function foo(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/
function foo(bar, baz,
qux, boop) {
qux();
}
FunctionExpression
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} }
option:
/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/
var foo = function(bar,
baz,
qux) {
qux();
}
Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
Examples of correct code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} }
option:
/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/
var foo = function(bar, baz,
qux, boop) {
qux();
}
CallExpression
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": 1} }
option:
/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/
foo(bar,
baz,
qux
);
Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": "first"} }
option:
/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/
foo(bar, baz,
baz, boop, beep);
ArrayExpression
Examples of incorrect code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/
var foo = [
bar,
baz,
qux
];
Examples of incorrect code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
Examples of correct code for this rule with the 2, { "ArrayExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/
var foo = [bar,
baz,
qux
];
ObjectExpression
Examples of incorrect code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of correct code for this rule with the 2, { "ObjectExpression": 1 }
option:
/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/
var foo = {
bar: 1,
baz: 2,
qux: 3
};
Examples of incorrect code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Examples of correct code for this rule with the 2, { "ObjectExpression": "first" }
option:
/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/
var foo = { bar: 1,
baz: 2 };
Compatibility
-
JSHint:
indent
- JSCS: validateIndentation Source: http://eslint.org/docs/rules/
TODO found Open
// TODO: Investigate why type is coming up as 0
- Exclude checks