Showing 591 of 591 total issues
Continuation line missing indentation or outdented Open
# 'fncychap': '\\usepackage{fncychap}',
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Multiple spaces after ',' Open
super(Limit, self).__init__(step=step, **options)
- Read upRead up
- Exclude checks
Avoid extraneous whitespace after a comma or a colon.
Note: these checks are disabled by default
Okay: a = (1, 2)
E241: a = (1, 2)
E242: a = (1,\t2)
Module level import not at top of file Open
import doctest
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
No newline at end of file Open
)
- Read upRead up
- Exclude checks
Trailing blank lines are superfluous.
Okay: spam(1)
W391: spam(1)\n
However the last line should end with a new line (warning W292).
Missing whitespace around arithmetic operator Open
abserr = max(abserr, 5.0*_EPS*abs(result))
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#except FileNotFoundError:
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Block comment should start with '# ' Open
#cmd_line = cmd_line_template.format(outputdir=output_dir, moduledir=module_dir)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
At least two spaces before inline comment Open
pkg_resources.require('setuptools>=39.2') # setuptools >=38.3.0 # version with most `setup.cfg` bugfixes
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around arithmetic operator Open
INFO = importlib.import_module(PACKAGE_NAME+'.info', './src')
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Missing whitespace around arithmetic operator Open
""".format(PACKAGE_NAME, '='*len(PACKAGE_NAME)))
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Missing whitespace around arithmetic operator Open
LICENSE = importlib.import_module(PACKAGE_NAME+'.license', './src')
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#cmd_line_template = "sphinx-apidoc -f -o {outputdir} {moduledir}"
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
approx_hess1=approx_hess2=approx_hess3=approx_hess_cs=_get_epsilon=None
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Too many blank lines (3) Open
# -- Options for HTMLHelp output ------------------------------------------
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Line break after binary operator Open
int(n - 1) * dict(multicomplex=0, complex=0.0).get(method, 1.3) +
- Read upRead up
- Exclude checks
Avoid breaks after binary operators.
The preferred place to break around a binary operator is before the
operator, not after it.
W504: (width == 0 +\n height == 0)
W504: (width == 0 and\n height == 0)
W504: var = (1 &\n ~2)
Okay: foo(\n -x)
Okay: foo(x\n [])
Okay: x = '''\n''' + ''
Okay: x = '' + '''\n'''
Okay: foo(x,\n -y)
Okay: foo(x, # comment\n -y)
The following should be W504 but unary_context is tricky with these
Okay: var = (1 /\n -2)
Okay: var = (1 +\n -1 +\n -2)
Line too long (119 > 110 characters) Open
- **Hessian**: Compute the Hessian matrix of all 2nd partial derivatives of a scalar function of one or more variables.
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Too many blank lines (3) Open
# -- General configuration ------------------------------------------------
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Continuation line under-indented for visual indent Open
| doctest.DONT_ACCEPT_TRUE_FOR_1
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Missing whitespace around arithmetic operator Open
partials = [f(x+ih, *args, **kwargs).imag / epsilon[i]
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Missing whitespace around arithmetic operator Open
e_1 = epstab[k_1-1]
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)