Sign upLogin

polkadot-js/apps

View on GitHub
Star

Showing 2,041 of 2,041 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    <InputAddress
      defaultValue={address}
      label={t('validator {{index}}', { replace: { index: index + 1 } })}
      onChange={_setAddress}
    />
Severity: Minor
Found in packages/page-parachains/src/Proposals/Propose.tsx and 1 other location - About 40 mins to fix
packages/page-accounts/src/modals/IdentitySub.tsx on lines 61..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    sorted: locks
      .map((info): [Partial<DeriveDemocracyLock>, BN] => [info, info.unlockAt && info.unlockAt.gt(bestNumber) ? info.unlockAt.sub(bestNumber) : BN_ZERO])
      .sort((a, b) => (a[0].referendumId || BN_ZERO).cmp(b[0].referendumId || BN_ZERO))
      .sort((a, b) => a[1].cmp(b[1]))
      .sort((a, b) => a[0].isFinished === b[0].isFinished ? 0 : (a[0].isFinished ? -1 : 1))
Severity: Minor
Found in packages/react-components/src/DemocracyLocks.tsx and 1 other location - About 40 mins to fix
packages/page-contracts/src/shared/Messages.tsx on lines 35..43

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          <CardSummary
            label={t('spend period')}
            progress={{
              total: spendPeriod,
              value: bestNumber.mod(spendPeriod),
Severity: Minor
Found in packages/page-treasury/src/Overview/Summary.tsx and 1 other location - About 40 mins to fix
packages/page-bounties/src/Summary.tsx on lines 58..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  {
    info: 'vara',
    providers: {
      Blast: 'wss://vara-mainnet.public.blastapi.io',
      Gear: 'wss://rpc.vara.network',
Severity: Minor
Found in packages/apps-config/src/endpoints/production.ts and 1 other location - About 40 mins to fix
packages/apps-config/src/endpoints/production.ts on lines 408..420

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  {
    info: 'crust',
    providers: {
      'Crust Network': 'wss://rpc.crust.network',
      Dwellir: 'wss://crust-mainnet-rpc.dwellir.com',
Severity: Minor
Found in packages/apps-config/src/endpoints/production.ts and 1 other location - About 40 mins to fix
packages/apps-config/src/endpoints/production.ts on lines 31..43

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  {
    info: 'polkadex',
    providers: {
      Dwellir: 'wss://polkadex-mainnet-rpc.dwellir.com',
      OnFinality: 'wss://polkadex.api.onfinality.io/public-ws',
Severity: Minor
Found in packages/apps-config/src/endpoints/production.ts and 1 other location - About 40 mins to fix
packages/apps-config/src/endpoints/production.ts on lines 579..591

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  {
    homepage: 'https://trustbase.network/',
    info: 'trustbase',
    isUnreachable: true,
    paraId: 2078,
Severity: Minor
Found in packages/apps-config/src/endpoints/productionRelayKusama.ts and 1 other location - About 40 mins to fix
packages/apps-config/src/endpoints/productionRelayKusama.ts on lines 562..573

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  useEffect((): void => {
    validator && setFlags((flags) => ({
      ...flags,
      isValidator: !validator.isEmpty
    }));
Severity: Minor
Found in packages/react-hooks/src/useAccountInfo.ts and 1 other location - About 40 mins to fix
packages/react-hooks/src/useAccountInfo.ts on lines 66..71

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  return messages
    .map((m, index): [AbiMessage, number] => [m, index])
    .sort((a, b) => a[0].identifier.localeCompare(b[0].identifier))
    .sort((a, b) => a[0].isMutating === b[0].isMutating
      ? 0
Severity: Minor
Found in packages/page-contracts/src/shared/Messages.tsx and 1 other location - About 40 mins to fix
packages/react-components/src/DemocracyLocks.tsx on lines 45..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          <CardSummary
            label={t('funding period')}
            progress={{
              total: spendPeriod,
              value: bestNumber.mod(spendPeriod),
Severity: Minor
Found in packages/page-bounties/src/Summary.tsx and 1 other location - About 40 mins to fix
packages/page-treasury/src/Overview/Summary.tsx on lines 121..128

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  useEffect((): void => {
    nominator && setFlags((flags) => ({
      ...flags,
      isNominator: !nominator.isEmpty
    }));
Severity: Minor
Found in packages/react-hooks/src/useAccountInfo.ts and 1 other location - About 40 mins to fix
packages/react-hooks/src/useAccountInfo.ts on lines 59..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        <InputAddress
          defaultValue={address}
          label={t('address {{index}}', { replace: { index: index + 1 } })}
          onChange={_setAddress}
        />
Severity: Minor
Found in packages/page-accounts/src/modals/IdentitySub.tsx and 1 other location - About 40 mins to fix
packages/page-parachains/src/Proposals/Propose.tsx on lines 36..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  const setStQueue = useCallback(
    (st: QueueStatus[]): void => {
      stRef.current = st;
      _setStQueue(st);
    },
Severity: Minor
Found in packages/react-hooks/src/ctx/Queue.tsx and 1 other location - About 40 mins to fix
packages/react-hooks/src/ctx/Queue.tsx on lines 174..180

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  return useEventChanges([
    api.events.assets.Created,
    api.events.assets.Destroyed,
    api.events.assets.ForceCreated
  ], filter, startValue);
Severity: Minor
Found in packages/page-assets/src/useAssetIds.ts and 1 other location - About 40 mins to fix
packages/page-nfts/src/useCollectionIds.ts on lines 36..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  return useEventChanges([
    api.events.uniques.Created,
    api.events.uniques.Destroyed,
    api.events.uniques.ForceCreated
  ], filter, startValue);
Severity: Minor
Found in packages/page-nfts/src/useCollectionIds.ts and 1 other location - About 40 mins to fix
packages/page-assets/src/useAssetIds.ts on lines 36..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  const setTxQueue = useCallback(
    (tx: QueueTx[]): void => {
      txRef.current = tx;
      _setTxQueue(tx);
    },
Severity: Minor
Found in packages/react-hooks/src/ctx/Queue.tsx and 1 other location - About 40 mins to fix
packages/react-hooks/src/ctx/Queue.tsx on lines 166..172

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Consider simplifying this complex logical expression.
Open

      if (newRaise && auctionInfo?.leasePeriod && campaigns.funds) {
        const leasePeriodStart = auctionInfo.leasePeriod;
        const leasePeriodEnd = leasePeriodStart.add(rangeMax);

        return campaigns.funds
Severity: Major
Found in packages/page-parachains/src/Auctions/Auction.tsx - About 40 mins to fix

    Identical blocks of code found in 5 locations. Consider refactoring.
    Open

    interface Props extends ModalProps {
  className?: string;
  onClose: () => void;
  onStatusChange: (status: ActionStatus) => void;
}
    Severity: Major
    Found in packages/page-accounts/src/modals/LocalAdd.tsx and 4 other locations - About 40 mins to fix
    packages/page-accounts/src/modals/Import.tsx on lines 20..24
    packages/page-accounts/src/modals/MultisigCreate.tsx on lines 19..23
    packages/page-accounts/src/modals/ProxiedAdd.tsx on lines 17..21
    packages/page-accounts/src/modals/Qr.tsx on lines 24..28

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 5 locations. Consider refactoring.
    Open

    interface Props extends ModalProps {
  className?: string;
  onClose: () => void;
  onStatusChange: (status: ActionStatus) => void;
}
    Severity: Major
    Found in packages/page-accounts/src/modals/Import.tsx and 4 other locations - About 40 mins to fix
    packages/page-accounts/src/modals/LocalAdd.tsx on lines 14..18
    packages/page-accounts/src/modals/MultisigCreate.tsx on lines 19..23
    packages/page-accounts/src/modals/ProxiedAdd.tsx on lines 17..21
    packages/page-accounts/src/modals/Qr.tsx on lines 24..28

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 5 locations. Consider refactoring.
    Open

    interface Props extends ModalProps {
  className?: string;
  onClose: () => void;
  onStatusChange: (status: ActionStatus) => void;
}
    Severity: Major
    Found in packages/page-accounts/src/modals/MultisigCreate.tsx and 4 other locations - About 40 mins to fix
    packages/page-accounts/src/modals/Import.tsx on lines 20..24
    packages/page-accounts/src/modals/LocalAdd.tsx on lines 14..18
    packages/page-accounts/src/modals/ProxiedAdd.tsx on lines 17..21
    packages/page-accounts/src/modals/Qr.tsx on lines 24..28

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Severity
    Category
    Status
    Source
    Language