third-party/leptonica/src/ccbord.c
/*====================================================================*
- Copyright (C) 2001 Leptonica. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials
- provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANY
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
- OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*====================================================================*/
/*
* ccbord.c
*
* CCBORDA and CCBORD creation and destruction
* CCBORDA *ccbaCreate()
* void *ccbaDestroy()
* CCBORD *ccbCreate()
* void *ccbDestroy()
*
* CCBORDA addition
* l_int32 ccbaAddCcb()
* static l_int32 ccbaExtendArray()
*
* CCBORDA accessors
* l_int32 ccbaGetCount()
* l_int32 ccbaGetCcb()
*
* Top-level border-finding routines
* CCBORDA *pixGetAllCCBorders()
* CCBORD *pixGetCCBorders()
* PTAA *pixGetOuterBordersPtaa()
* PTA *pixGetOuterBorderPta()
*
* Lower-level border location routines
* l_int32 pixGetOuterBorder()
* l_int32 pixGetHoleBorder()
* l_int32 findNextBorderPixel()
* void locateOutsideSeedPixel()
*
* Border conversions
* l_int32 ccbaGenerateGlobalLocs()
* l_int32 ccbaGenerateStepChains()
* l_int32 ccbaStepChainsToPixCoords()
* l_int32 ccbaGenerateSPGlobalLocs()
*
* Conversion to single path
* l_int32 ccbaGenerateSinglePath()
* PTA *getCutPathForHole()
*
* Border and full image rendering
* PIX *ccbaDisplayBorder()
* PIX *ccbaDisplaySPBorder()
* PIX *ccbaDisplayImage1()
* PIX *ccbaDisplayImage2()
*
* Serialize for I/O
* l_int32 ccbaWrite()
* l_int32 ccbaWriteStream()
* l_int32 ccbaRead()
* l_int32 ccbaReadStream()
*
* SVG output
* l_int32 ccbaWriteSVG()
* char *ccbaWriteSVGString()
*
*
* Border finding is tricky because components can have
* holes, which also need to be traced out. The outer
* border can be connected with all the hole borders,
* so that there is a single border for each component.
* [Alternatively, the connecting paths can be eliminated if
* you're willing to have a set of borders for each
* component (an exterior border and some number of
* interior ones), with "line to" operations tracing
* out each border and "move to" operations going from
* one border to the next.]
*
* Here's the plan. We get the pix for each connected
* component, and trace its exterior border. We then
* find the holes (if any) in the pix, and separately
* trace out their borders, all using the same
* border-following rule that has ON pixels on the right
* side of the path.
*
* [For svg, we may want to turn each set of borders for a c.c.
* into a closed path. This can be done by tunnelling
* through the component from the outer border to each of the
* holes, going in and coming out along the same path so
* the connection will be invisible in any rendering
* (display or print) from the outline. The result is a
* closed path, where the outside border is traversed
* cw and each hole is traversed ccw. The svg renderer
* is assumed to handle these closed borders properly.]
*
* Each border is a closed path that is traversed in such
* a way that the stuff inside the c.c. is on the right
* side of the traveller. The border of a singly-connected
* component is thus traversed cw, and the border of the
* holes inside a c.c. are traversed ccw. Suppose we have
* a list of all the borders of each c.c., both the cw and ccw
* traversals. How do we reconstruct the image?
*
* Reconstruction:
*
* Method 1. Topological method using connected components.
* We have closed borders composed of cw border pixels for the
* exterior of c.c. and ccw border pixels for the interior (holes)
* in the c.c.
* (a) Initialize the destination to be OFF. Then,
* in any order:
* (b) Fill the components within and including the cw borders,
* and sequentially XOR them onto the destination.
* (c) Fill the components within but not including the ccw
* borders and sequentially XOR them onto the destination.
* The components that are XOR'd together can be generated as follows:
* (a) For each closed cw path, use pixFillClosedBorders():
* (1) Turn on the path pixels in a subimage that
* minimally supports the border.
* (2) Do a 4-connected fill from a seed of 1 pixel width
* on the border, using the inverted image in (1) as
* a filling mask.
* (3) Invert the fill result: this gives the component
* including the exterior cw path, with all holes
* filled.
* (b) For each closed ccw path (hole):
* (1) Turn on the path pixels in a subimage that minimally
* supports the path.
* (2) Find a seed pixel on the inside of this path.
* (3) Do a 4-connected fill from this seed pixel, using
* the inverted image of the path in (1) as a filling
* mask.
*
* ------------------------------------------------------
*
* Method 2. A variant of Method 1. Topological.
* In Method 1, we treat the exterior border differently from
* the interior (hole) borders. Here, all borders in a c.c.
* are treated equally:
* (1) Start with a pix with a 1 pixel OFF boundary
* enclosing all the border pixels of the c.c.
* This is the filling mask.
* (2) Make a seed image of the same size as follows: for
* each border, put one seed pixel OUTSIDE the border
* (where OUTSIDE is determined by the inside/outside
* convention for borders).
* (3) Seedfill into the seed image, filling in the regions
* determined by the filling mask. The fills are clipped
* by the border pixels.
* (4) Inverting this, we get the c.c. properly filled,
* with the holes empty!
* (5) Rasterop using XOR the filled c.c. (but not the 1
* pixel boundary) into the full dest image.
*
* Method 2 is about 1.2x faster than Method 1 on text images,
* and about 2x faster on complex images (e.g., with halftones).
*
* ------------------------------------------------------
*
* Method 3. The traditional way to fill components delineated
* by boundaries is through scan line conversion. It's a bit
* tricky, and I have not yet tried to implement it.
*
* ------------------------------------------------------
*
* Method 4. [Nota Bene: this method probably doesn't work, and
* won't be implemented. If I get a more traditional scan line
* conversion algorithm working, I'll erase these notes.]
* Render all border pixels on a destination image,
* which will be the final result after scan conversion. Assign
* a value 1 to pixels on cw paths, 2 to pixels on ccw paths,
* and 3 to pixels that are on both paths. Each of the paths
* is an 8-connected component. Now scan across each raster
* line. The attempt is to make rules for each scan line
* that are independent of neighboring scanlines. Here are
* a set of rules for writing ON pixels on a destination raster image:
*
* (a) The rasterizer will be in one of two states: ON and OFF.
* (b) Start each line in the OFF state. In the OFF state,
* skip pixels until you hit a path of any type. Turn
* the path pixel ON.
* (c) If the state is ON, each pixel you encounter will
* be turned on, until and including hitting a path pixel.
* (d) When you hit a path pixel, if the path does NOT cut
* through the line, so that there is not an 8-cc path
* pixel (of any type) both above and below, the state
* is unchanged (it stays either ON or OFF).
* (e) If the path does cut through, but with a possible change
* of pixel type, then we decide whether or
* not to toggle the state based on the values of the
* path pixel and the path pixels above and below:
* (1) if a 1 path cuts through, toggle;
* (1) if a 2 path cuts through, toggle;
* (3) if a 3 path cuts through, do not toggle;
* (4) if on one side a 3 touches both a 1 and a 2, use the 2
* (5) if a 3 has any 1 neighbors, toggle; else if it has
* no 1 neighbors, do not toggle;
* (6) if a 2 has any neighbors that are 1 or 3,
* do not toggle
* (7) if a 1 has neighbors 1 and x (x = 2 or 3),
* toggle
*
*
* To visualize how these rules work, consider the following
* component with border pixels labeled according to the scheme
* above. We also show the values of the interior pixels
* (w=OFF, b=ON), but these of course must be inferred properly
* from the rules above:
*
* 3
* 3 w 3 1 1 1
* 1 2 1 1 b 2 b 1
* 1 b 1 3 w 2 1
* 3 b 1 1 b 2 b 1
* 3 w 3 1 1 1
* 3 w 3
* 1 b 2 b 1
* 1 2 w 2 1
* 1 b 2 w 2 b 1
* 1 2 w 2 1
* 1 2 b 1
* 1 b 1
* 1
*
*
* Even if this works, which is unlikely, it will certainly be
* slow because decisions have to be made on a pixel-by-pixel
* basis when encountering borders.
*
*/
#include <string.h>
#include "allheaders.h"
#ifdef HAVE_CONFIG_H
#include "config_auto.h"
#endif /* HAVE_CONFIG_H */
static const l_int32 INITIAL_PTR_ARRAYSIZE = 20; /* n'import quoi */
/* In ccbaGenerateSinglePath(): don't save holes
* in c.c. with ridiculously many small holes */
static const l_int32 NMAX_HOLES = 150;
/* Tables used to trace the border.
* - The 8 pixel positions of neighbors Q are labelled:
* 1 2 3
* 0 P 4
* 7 6 5
* where the labels are the index offset [0, ... 7] of Q relative to P.
* - xpostab[] and ypostab[] give the actual x and y pixel offsets
* of Q relative to P, indexed by the index offset.
* - qpostab[pos] gives the new index offset of Q relative to P, at
* the time that a new P has been chosen to be in index offset
* position 'pos' relative to the previous P. The relation
* between P and Q is always 4-connected. */
static const l_int32 xpostab[] = {-1, -1, 0, 1, 1, 1, 0, -1};
static const l_int32 ypostab[] = {0, -1, -1, -1, 0, 1, 1, 1};
static const l_int32 qpostab[] = {6, 6, 0, 0, 2, 2, 4, 4};
/* Static function */
static l_int32 ccbaExtendArray(CCBORDA *ccba);
#ifndef NO_CONSOLE_IO
#define DEBUG_PRINT 0
#endif /* NO CONSOLE_IO */
/*---------------------------------------------------------------------*
* ccba and ccb creation and destruction *
*---------------------------------------------------------------------*/
/*!
* ccbaCreate()
*
* Input: pixs (binary image; can be null)
* n (initial number of ptrs)
* Return: ccba, or null on error
*/
CCBORDA *
ccbaCreate(PIX *pixs,
l_int32 n)
{
CCBORDA *ccba;
PROCNAME("ccbaCreate");
if (n <= 0)
n = INITIAL_PTR_ARRAYSIZE;
if ((ccba = (CCBORDA *)CALLOC(1, sizeof(CCBORDA))) == NULL)
return (CCBORDA *)ERROR_PTR("ccba not made", procName, NULL);
if (pixs) {
ccba->pix = pixClone(pixs);
ccba->w = pixGetWidth(pixs);
ccba->h = pixGetHeight(pixs);
}
ccba->n = 0;
ccba->nalloc = n;
if ((ccba->ccb = (CCBORD **)CALLOC(n, sizeof(CCBORD *))) == NULL)
return (CCBORDA *)ERROR_PTR("ccba ptrs not made", procName, NULL);
return ccba;
}
/*!
* ccbaDestroy()
*
* Input: &ccba (<to be nulled>)
* Return: void
*/
void
ccbaDestroy(CCBORDA **pccba)
{
l_int32 i;
CCBORDA *ccba;
PROCNAME("ccbaDestroy");
if (pccba == NULL) {
L_WARNING("ptr address is NULL!\n", procName);
return;
}
if ((ccba = *pccba) == NULL)
return;
pixDestroy(&ccba->pix);
for (i = 0; i < ccba->n; i++)
ccbDestroy(&ccba->ccb[i]);
FREE(ccba->ccb);
FREE(ccba);
*pccba = NULL;
return;
}
/*!
* ccbCreate()
*
* Input: pixs (<optional>)
* Return: ccb or null on error
*/
CCBORD *
ccbCreate(PIX *pixs)
{
BOXA *boxa;
CCBORD *ccb;
PTA *start;
PTAA *local;
PROCNAME("ccbCreate");
if (pixs) {
if (pixGetDepth(pixs) != 1)
return (CCBORD *)ERROR_PTR("pixs not binary", procName, NULL);
}
if ((ccb = (CCBORD *)CALLOC(1, sizeof(CCBORD))) == NULL)
return (CCBORD *)ERROR_PTR("ccb not made", procName, NULL);
ccb->refcount++;
if (pixs)
ccb->pix = pixClone(pixs);
if ((boxa = boxaCreate(1)) == NULL)
return (CCBORD *)ERROR_PTR("boxa not made", procName, NULL);
ccb->boxa = boxa;
if ((start = ptaCreate(1)) == NULL)
return (CCBORD *)ERROR_PTR("start pta not made", procName, NULL);
ccb->start = start;
if ((local = ptaaCreate(1)) == NULL)
return (CCBORD *)ERROR_PTR("local ptaa not made", procName, NULL);
ccb->local = local;
return ccb;
}
/*!
* ccbDestroy()
*
* Input: &ccb (<to be nulled>)
* Return: void
*/
void
ccbDestroy(CCBORD **pccb)
{
CCBORD *ccb;
PROCNAME("ccbDestroy");
if (pccb == NULL) {
L_WARNING("ptr address is NULL!\n", procName);
return;
}
if ((ccb = *pccb) == NULL)
return;
ccb->refcount--;
if (ccb->refcount == 0) {
if (ccb->pix)
pixDestroy(&ccb->pix);
if (ccb->boxa)
boxaDestroy(&ccb->boxa);
if (ccb->start)
ptaDestroy(&ccb->start);
if (ccb->local)
ptaaDestroy(&ccb->local);
if (ccb->global)
ptaaDestroy(&ccb->global);
if (ccb->step)
numaaDestroy(&ccb->step);
if (ccb->splocal)
ptaDestroy(&ccb->splocal);
if (ccb->spglobal)
ptaDestroy(&ccb->spglobal);
FREE(ccb);
*pccb = NULL;
}
return;
}
/*---------------------------------------------------------------------*
* ccba addition *
*---------------------------------------------------------------------*/
/*!
* ccbaAddCcb()
*
* Input: ccba
* ccb (to be added by insertion)
* Return: 0 if OK; 1 on error
*/
l_int32
ccbaAddCcb(CCBORDA *ccba,
CCBORD *ccb)
{
l_int32 n;
PROCNAME("ccbaAddCcb");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
if (!ccb)
return ERROR_INT("ccb not defined", procName, 1);
n = ccbaGetCount(ccba);
if (n >= ccba->nalloc)
ccbaExtendArray(ccba);
ccba->ccb[n] = ccb;
ccba->n++;
return 0;
}
/*!
* ccbaExtendArray()
*
* Input: ccba
* Return: 0 if OK; 1 on error
*/
static l_int32
ccbaExtendArray(CCBORDA *ccba)
{
PROCNAME("ccbaExtendArray");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
if ((ccba->ccb = (CCBORD **)reallocNew((void **)&ccba->ccb,
sizeof(CCBORD *) * ccba->nalloc,
2 * sizeof(CCBORD *) * ccba->nalloc)) == NULL)
return ERROR_INT("new ptr array not returned", procName, 1);
ccba->nalloc = 2 * ccba->nalloc;
return 0;
}
/*---------------------------------------------------------------------*
* ccba accessors *
*---------------------------------------------------------------------*/
/*!
* ccbaGetCount()
*
* Input: ccba
* Return: count, with 0 on error
*/
l_int32
ccbaGetCount(CCBORDA *ccba)
{
PROCNAME("ccbaGetCount");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 0);
return ccba->n;
}
/*!
* ccbaGetCcb()
*
* Input: ccba
* Return: ccb, or null on error
*/
CCBORD *
ccbaGetCcb(CCBORDA *ccba,
l_int32 index)
{
CCBORD *ccb;
PROCNAME("ccbaGetCcb");
if (!ccba)
return (CCBORD *)ERROR_PTR("ccba not defined", procName, NULL);
if (index < 0 || index >= ccba->n)
return (CCBORD *)ERROR_PTR("index out of bounds", procName, NULL);
ccb = ccba->ccb[index];
ccb->refcount++;
return ccb;
}
/*---------------------------------------------------------------------*
* Top-level border-finding routines *
*---------------------------------------------------------------------*/
/*!
* pixGetAllCCBorders()
*
* Input: pixs (1 bpp)
* Return: ccborda, or null on error
*/
CCBORDA *
pixGetAllCCBorders(PIX *pixs)
{
l_int32 n, i;
BOX *box;
BOXA *boxa;
CCBORDA *ccba;
CCBORD *ccb;
PIX *pix;
PIXA *pixa;
PROCNAME("pixGetAllCCBorders");
if (!pixs)
return (CCBORDA *)ERROR_PTR("pixs not defined", procName, NULL);
if (pixGetDepth(pixs) != 1)
return (CCBORDA *)ERROR_PTR("pixs not binary", procName, NULL);
if ((boxa = pixConnComp(pixs, &pixa, 8)) == NULL)
return (CCBORDA *)ERROR_PTR("boxa not made", procName, NULL);
n = boxaGetCount(boxa);
if ((ccba = ccbaCreate(pixs, n)) == NULL)
return (CCBORDA *)ERROR_PTR("ccba not made", procName, NULL);
for (i = 0; i < n; i++) {
if ((pix = pixaGetPix(pixa, i, L_CLONE)) == NULL)
return (CCBORDA *)ERROR_PTR("pix not found", procName, NULL);
if ((box = pixaGetBox(pixa, i, L_CLONE)) == NULL)
return (CCBORDA *)ERROR_PTR("box not found", procName, NULL);
if ((ccb = pixGetCCBorders(pix, box)) == NULL)
return (CCBORDA *)ERROR_PTR("ccb not made", procName, NULL);
/* ptaWriteStream(stderr, ccb->local, 1); */
ccbaAddCcb(ccba, ccb);
pixDestroy(&pix);
boxDestroy(&box);
}
boxaDestroy(&boxa);
pixaDestroy(&pixa);
return ccba;
}
/*!
* pixGetCCBorders()
*
* Input: pixs (1 bpp, one 8-connected component)
* box (xul, yul, width, height) in global coords
* Return: ccbord, or null on error
*
* Notes:
* (1) We are finding the exterior and interior borders
* of an 8-connected component. This should be used
* on a pix that has exactly one 8-connected component.
* (2) Typically, pixs is a c.c. in some larger pix. The
* input box gives its location in global coordinates.
* This box is saved, as well as the boxes for the
* borders of any holes within the c.c., but the latter
* are given in relative coords within the c.c.
* (3) The calculations for the exterior border are done
* on a pix with a 1-pixel
* added border, but the saved pixel coordinates
* are the correct (relative) ones for the input pix
* (without a 1-pixel border)
* (4) For the definition of the three tables -- xpostab[], ypostab[]
* and qpostab[] -- see above where they are defined.
*/
CCBORD *
pixGetCCBorders(PIX *pixs,
BOX *box)
{
l_int32 allzero, i, x, xh, w, nh;
l_int32 xs, ys; /* starting hole border pixel, relative in pixs */
l_uint32 val;
BOX *boxt, *boxe;
BOXA *boxa;
CCBORD *ccb;
PIX *pixh; /* for hole components */
PIX *pixt;
PIXA *pixa;
PROCNAME("pixGetCCBorders");
if (!pixs)
return (CCBORD *)ERROR_PTR("pixs not defined", procName, NULL);
if (!box)
return (CCBORD *)ERROR_PTR("box not defined", procName, NULL);
if (pixGetDepth(pixs) != 1)
return (CCBORD *)ERROR_PTR("pixs not binary", procName, NULL);
pixZero(pixs, &allzero);
if (allzero)
return (CCBORD *)ERROR_PTR("pixs all 0", procName, NULL);
if ((ccb = ccbCreate(pixs)) == NULL)
return (CCBORD *)ERROR_PTR("ccb not made", procName, NULL);
/* Get the exterior border */
pixGetOuterBorder(ccb, pixs, box);
/* Find the holes, if any */
if ((pixh = pixHolesByFilling(pixs, 4)) == NULL)
return (CCBORD *)ERROR_PTR("pixh not made", procName, NULL);
pixZero(pixh, &allzero);
if (allzero) { /* no holes */
pixDestroy(&pixh);
return ccb;
}
/* Get c.c. and locations of the holes */
if ((boxa = pixConnComp(pixh, &pixa, 4)) == NULL)
return (CCBORD *)ERROR_PTR("boxa not made", procName, NULL);
nh = boxaGetCount(boxa);
/* fprintf(stderr, "%d holes\n", nh); */
/* For each hole, find an interior pixel within the hole,
* then march to the right and stop at the first border
* pixel. Save the bounding box of the border, which
* is 1 pixel bigger on each side than the bounding box
* of the hole itself. Note that we use a pix of the
* c.c. of the hole itself to be sure that we start
* with a pixel in the hole of the proper component.
* If we did everything from the parent component, it is
* possible to start in a different hole that is within
* the b.b. of a larger hole. */
w = pixGetWidth(pixs);
for (i = 0; i < nh; i++) {
boxt = boxaGetBox(boxa, i, L_CLONE);
pixt = pixaGetPix(pixa, i, L_CLONE);
ys = boxt->y; /* there must be a hole pixel on this raster line */
for (x = 0; x < boxt->w; x++) { /* look for (fg) hole pixel */
pixGetPixel(pixt, x, 0, &val);
if (val == 1) {
xh = x;
break;
}
}
if (x == boxt->w) {
L_WARNING("no hole pixel found!\n", procName);
continue;
}
for (x = xh + boxt->x; x < w; x++) { /* look for (fg) border pixel */
pixGetPixel(pixs, x, ys, &val);
if (val == 1) {
xs = x;
break;
}
}
boxe = boxCreate(boxt->x - 1, boxt->y - 1, boxt->w + 2, boxt->h + 2);
#if DEBUG_PRINT
boxPrintStreamInfo(stderr, box);
boxPrintStreamInfo(stderr, boxe);
fprintf(stderr, "xs = %d, ys = %d\n", xs, ys);
#endif /* DEBUG_PRINT */
pixGetHoleBorder(ccb, pixs, boxe, xs, ys);
boxDestroy(&boxt);
boxDestroy(&boxe);
pixDestroy(&pixt);
}
boxaDestroy(&boxa);
pixaDestroy(&pixa);
pixDestroy(&pixh);
return ccb;
}
/*!
* pixGetOuterBordersPtaa()
*
* Input: pixs (1 bpp)
* Return: ptaa (of outer borders, in global coords), or null on error
*/
PTAA *
pixGetOuterBordersPtaa(PIX *pixs)
{
l_int32 i, n;
BOX *box;
BOXA *boxa;
PIX *pix;
PIXA *pixa;
PTA *pta;
PTAA *ptaa;
PROCNAME("pixGetOuterBordersPtaa");
if (!pixs)
return (PTAA *)ERROR_PTR("pixs not defined", procName, NULL);
if (pixGetDepth(pixs) != 1)
return (PTAA *)ERROR_PTR("pixs not binary", procName, NULL);
boxa = pixConnComp(pixs, &pixa, 8);
n = boxaGetCount(boxa);
if (n == 0) {
boxaDestroy(&boxa);
pixaDestroy(&pixa);
return (PTAA *)ERROR_PTR("pixs empty", procName, NULL);
}
ptaa = ptaaCreate(n);
for (i = 0; i < n; i++) {
box = boxaGetBox(boxa, i, L_CLONE);
pix = pixaGetPix(pixa, i, L_CLONE);
pta = pixGetOuterBorderPta(pix, box);
if (pta)
ptaaAddPta(ptaa, pta, L_INSERT);
boxDestroy(&box);
pixDestroy(&pix);
}
pixaDestroy(&pixa);
boxaDestroy(&boxa);
return ptaa;
}
/*!
* pixGetOuterBorderPta()
*
* Input: pixs (1 bpp, one 8-connected component)
* box (<optional> of pixs, in global coordinates)
* Return: pta (of outer border, in global coords), or null on error
*
* Notes:
* (1) We are finding the exterior border of a single 8-connected
* component.
* (2) If box is NULL, the outline returned is in the local coords
* of the input pix. Otherwise, box is assumed to give the
* location of the pix in global coordinates, and the returned
* pta will be in those global coordinates.
*/
PTA *
pixGetOuterBorderPta(PIX *pixs,
BOX *box)
{
l_int32 allzero, x, y;
BOX *boxt;
CCBORD *ccb;
PTA *ptaloc, *ptad;
PROCNAME("pixGetOuterBorderPta");
if (!pixs)
return (PTA *)ERROR_PTR("pixs not defined", procName, NULL);
if (pixGetDepth(pixs) != 1)
return (PTA *)ERROR_PTR("pixs not binary", procName, NULL);
pixZero(pixs, &allzero);
if (allzero)
return (PTA *)ERROR_PTR("pixs all 0", procName, NULL);
if ((ccb = ccbCreate(pixs)) == NULL)
return (PTA *)ERROR_PTR("ccb not made", procName, NULL);
if (!box)
boxt = boxCreate(0, 0, pixGetWidth(pixs), pixGetHeight(pixs));
else
boxt = boxClone(box);
/* Get the exterior border in local coords */
pixGetOuterBorder(ccb, pixs, boxt);
if ((ptaloc = ptaaGetPta(ccb->local, 0, L_CLONE)) == NULL) {
ccbDestroy(&ccb);
boxDestroy(&boxt);
return (PTA *)ERROR_PTR("ptaloc not made", procName, NULL);
}
/* Transform to global coordinates, if they are given */
if (box) {
boxGetGeometry(box, &x, &y, NULL, NULL);
ptad = ptaTransform(ptaloc, x, y, 1.0, 1.0);
} else {
ptad = ptaClone(ptaloc);
}
ptaDestroy(&ptaloc);
boxDestroy(&boxt);
ccbDestroy(&ccb);
return ptad;
}
/*---------------------------------------------------------------------*
* Lower-level border-finding routines *
*---------------------------------------------------------------------*/
/*!
* pixGetOuterBorder()
*
* Input: ccb (unfilled)
* pixs (for the component at hand)
* box (for the component, in global coords)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) the border is saved in relative coordinates within
* the c.c. (pixs). Because the calculation is done
* in pixb with added 1 pixel border, we must subtract
* 1 from each pixel value before storing it.
* (2) the stopping condition is that after the first pixel is
* returned to, the next pixel is the second pixel. Having
* these 2 pixels recur in sequence proves the path is closed,
* and we do not store the second pixel again.
*/
l_int32
pixGetOuterBorder(CCBORD *ccb,
PIX *pixs,
BOX *box)
{
l_int32 fpx, fpy, spx, spy, qpos;
l_int32 px, py, npx, npy;
l_int32 w, h, wpl;
l_uint32 *data;
PTA *pta;
PIX *pixb; /* with 1 pixel border */
PROCNAME("pixGetOuterBorder");
if (!ccb)
return ERROR_INT("ccb not defined", procName, 1);
if (!pixs)
return ERROR_INT("pixs not defined", procName, 1);
if (!box)
return ERROR_INT("box not defined", procName, 1);
/* Add 1-pixel border all around, and find start pixel */
if ((pixb = pixAddBorder(pixs, 1, 0)) == NULL)
return ERROR_INT("pixs not made", procName, 1);
if (!nextOnPixelInRaster(pixb, 1, 1, &px, &py))
return ERROR_INT("no start pixel found", procName, 1);
qpos = 0; /* relative to p */
fpx = px; /* save location of first pixel on border */
fpy = py;
/* Save box and start pixel in relative coords */
boxaAddBox(ccb->boxa, box, L_COPY);
ptaAddPt(ccb->start, px - 1, py - 1);
if ((pta = ptaCreate(0)) == NULL)
return ERROR_INT("pta not made", procName, 1);
ptaaAddPta(ccb->local, pta, L_INSERT);
ptaAddPt(pta, px - 1, py - 1); /* initial point */
w = pixGetWidth(pixb);
h = pixGetHeight(pixb);
data = pixGetData(pixb);
wpl = pixGetWpl(pixb);
/* Get the second point; if there is none, return */
if (findNextBorderPixel(w, h, data, wpl, px, py, &qpos, &npx, &npy)) {
pixDestroy(&pixb);
return 0;
}
spx = npx; /* save location of second pixel on border */
spy = npy;
ptaAddPt(pta, npx - 1, npy - 1); /* second point */
px = npx;
py = npy;
while (1) {
findNextBorderPixel(w, h, data, wpl, px, py, &qpos, &npx, &npy);
if (px == fpx && py == fpy && npx == spx && npy == spy)
break;
ptaAddPt(pta, npx - 1, npy - 1);
px = npx;
py = npy;
}
pixDestroy(&pixb);
return 0;
}
/*!
* pixGetHoleBorder()
*
* Input: ccb (the exterior border is already made)
* pixs (for the connected component at hand)
* box (for the specific hole border, in relative
* coordinates to the c.c.)
* xs, ys (first pixel on hole border, relative to c.c.)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) we trace out hole border on pixs without addition
* of single pixel added border to pixs
* (2) therefore all coordinates are relative within the c.c. (pixs)
* (3) same position tables and stopping condition as for
* exterior borders
*/
l_int32
pixGetHoleBorder(CCBORD *ccb,
PIX *pixs,
BOX *box,
l_int32 xs,
l_int32 ys)
{
l_int32 fpx, fpy, spx, spy, qpos;
l_int32 px, py, npx, npy;
l_int32 w, h, wpl;
l_uint32 *data;
PTA *pta;
PROCNAME("pixGetHoleBorder");
if (!ccb)
return ERROR_INT("ccb not defined", procName, 1);
if (!pixs)
return ERROR_INT("pixs not defined", procName, 1);
if (!box)
return ERROR_INT("box not defined", procName, 1);
/* Add border and find start pixel */
qpos = 0; /* orientation of Q relative to P */
fpx = xs; /* save location of first pixel on border */
fpy = ys;
/* Save box and start pixel */
boxaAddBox(ccb->boxa, box, L_COPY);
ptaAddPt(ccb->start, xs, ys);
if ((pta = ptaCreate(0)) == NULL)
return ERROR_INT("pta not made", procName, 1);
ptaaAddPta(ccb->local, pta, L_INSERT);
ptaAddPt(pta, xs, ys); /* initial pixel */
w = pixGetWidth(pixs);
h = pixGetHeight(pixs);
data = pixGetData(pixs);
wpl = pixGetWpl(pixs);
/* Get the second point; there should always be at least 4 pts
* in a minimal hole border! */
if (findNextBorderPixel(w, h, data, wpl, xs, ys, &qpos, &npx, &npy))
return ERROR_INT("isolated hole border point!", procName, 1);
spx = npx; /* save location of second pixel on border */
spy = npy;
ptaAddPt(pta, npx, npy); /* second pixel */
px = npx;
py = npy;
while (1) {
findNextBorderPixel(w, h, data, wpl, px, py, &qpos, &npx, &npy);
if (px == fpx && py == fpy && npx == spx && npy == spy)
break;
ptaAddPt(pta, npx, npy);
px = npx;
py = npy;
}
return 0;
}
/*!
* findNextBorderPixel()
*
* Input: w, h, data, wpl
* (px, py), (current P)
* &qpos (input current Q; <return> new Q)
* (&npx, &npy) (<return> new P)
* Return: 0 if next pixel found; 1 otherwise
*
* Notes:
* (1) qpos increases clockwise from 0 to 7, with 0 at
* location with Q to left of P: Q P
* (2) this is a low-level function that does not check input
* parameters. All calling functions should check them.
*/
l_int32
findNextBorderPixel(l_int32 w,
l_int32 h,
l_uint32 *data,
l_int32 wpl,
l_int32 px,
l_int32 py,
l_int32 *pqpos,
l_int32 *pnpx,
l_int32 *pnpy)
{
l_int32 qpos, i, pos, npx, npy, val;
l_uint32 *line;
qpos = *pqpos;
for (i = 1; i < 8; i++) {
pos = (qpos + i) % 8;
npx = px + xpostab[pos];
npy = py + ypostab[pos];
line = data + npy * wpl;
val = GET_DATA_BIT(line, npx);
if (val) {
*pnpx = npx;
*pnpy = npy;
*pqpos = qpostab[pos];
return 0;
}
}
return 1;
}
/*!
* locateOutsideSeedPixel()
*
* Input: fpx, fpy (location of first pixel)
* spx, spy (location of second pixel)
* &xs, &xy (seed pixel to be returned)
*
* Notes:
* (1) the first and second pixels must be 8-adjacent,
* so |dx| <= 1 and |dy| <= 1 and both dx and dy
* cannot be 0. There are 8 possible cases.
* (2) the seed pixel is OUTSIDE the foreground of the c.c.
* (3) these rules are for the situation where the INSIDE
* of the c.c. is on the right as you follow the border:
* cw for an exterior border and ccw for a hole border.
*/
void
locateOutsideSeedPixel(l_int32 fpx,
l_int32 fpy,
l_int32 spx,
l_int32 spy,
l_int32 *pxs,
l_int32 *pys)
{
l_int32 dx, dy;
dx = spx - fpx;
dy = spy - fpy;
if (dx * dy == 1) {
*pxs = fpx + dx;
*pys = fpy;
} else if (dx * dy == -1) {
*pxs = fpx;
*pys = fpy + dy;
} else if (dx == 0) {
*pxs = fpx + dy;
*pys = fpy + dy;
} else /* dy == 0 */ {
*pxs = fpx + dx;
*pys = fpy - dx;
}
return;
}
/*---------------------------------------------------------------------*
* Border conversions *
*---------------------------------------------------------------------*/
/*!
* ccbaGenerateGlobalLocs()
*
* Input: ccba (with local chain ptaa of borders computed)
* Return: 0 if OK, 1 on error
*
* Action: this uses the pixel locs in the local ptaa, which are all
* relative to each c.c., to find the global pixel locations,
* and stores them in the global ptaa.
*/
l_int32
ccbaGenerateGlobalLocs(CCBORDA *ccba)
{
l_int32 ncc, nb, n, i, j, k, xul, yul, x, y;
CCBORD *ccb;
PTAA *ptaal, *ptaag;
PTA *ptal, *ptag;
PROCNAME("ccbaGenerateGlobalLocs");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
ncc = ccbaGetCount(ccba); /* number of c.c. */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
/* Get the UL corner in global coords, (xul, yul), of the c.c. */
boxaGetBoxGeometry(ccb->boxa, 0, &xul, &yul, NULL, NULL);
/* Make a new global ptaa, removing any old one */
ptaal = ccb->local;
nb = ptaaGetCount(ptaal); /* number of borders */
if (ccb->global) /* remove old one */
ptaaDestroy(&ccb->global);
if ((ptaag = ptaaCreate(nb)) == NULL)
return ERROR_INT("ptaag not made", procName, 1);
ccb->global = ptaag; /* save new one */
/* Iterate through the borders for this c.c. */
for (j = 0; j < nb; j++) {
ptal = ptaaGetPta(ptaal, j, L_CLONE);
n = ptaGetCount(ptal); /* number of pixels in border */
if ((ptag = ptaCreate(n)) == NULL)
return ERROR_INT("ptag not made", procName, 1);
ptaaAddPta(ptaag, ptag, L_INSERT);
for (k = 0; k < n; k++) {
ptaGetIPt(ptal, k, &x, &y);
ptaAddPt(ptag, x + xul, y + yul);
}
ptaDestroy(&ptal);
}
ccbDestroy(&ccb);
}
return 0;
}
/*!
* ccbaGenerateStepChains()
*
* Input: ccba (with local chain ptaa of borders computed)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This uses the pixel locs in the local ptaa,
* which are all relative to each c.c., to find
* the step directions for successive pixels in
* the chain, and stores them in the step numaa.
* (2) To get the step direction, use
* 1 2 3
* 0 P 4
* 7 6 5
* where P is the previous pixel at (px, py). The step direction
* is the number (from 0 through 7) for each relative location
* of the current pixel at (cx, cy). It is easily found by
* indexing into a 2-d 3x3 array (dirtab).
*/
l_int32
ccbaGenerateStepChains(CCBORDA *ccba)
{
l_int32 ncc, nb, n, i, j, k;
l_int32 px, py, cx, cy, stepdir;
l_int32 dirtab[][3] = {{1, 2, 3}, {0, -1, 4}, {7, 6, 5}};
CCBORD *ccb;
NUMA *na;
NUMAA *naa; /* step chain code; to be made */
PTA *ptal;
PTAA *ptaal; /* local chain code */
PROCNAME("ccbaGenerateStepChains");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
ncc = ccbaGetCount(ccba); /* number of c.c. */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
/* Make a new step numaa, removing any old one */
ptaal = ccb->local;
nb = ptaaGetCount(ptaal); /* number of borders */
if (ccb->step) /* remove old one */
numaaDestroy(&ccb->step);
if ((naa = numaaCreate(nb)) == NULL)
return ERROR_INT("naa not made", procName, 1);
ccb->step = naa; /* save new one */
/* Iterate through the borders for this c.c. */
for (j = 0; j < nb; j++) {
ptal = ptaaGetPta(ptaal, j, L_CLONE);
n = ptaGetCount(ptal); /* number of pixels in border */
if (n == 1) { /* isolated pixel */
na = numaCreate(1); /* but leave it empty */
} else { /* trace out the boundary */
if ((na = numaCreate(n)) == NULL)
return ERROR_INT("na not made", procName, 1);
ptaGetIPt(ptal, 0, &px, &py);
for (k = 1; k < n; k++) {
ptaGetIPt(ptal, k, &cx, &cy);
stepdir = dirtab[1 + cy - py][1 + cx - px];
numaAddNumber(na, stepdir);
px = cx;
py = cy;
}
}
numaaAddNuma(naa, na, L_INSERT);
ptaDestroy(&ptal);
}
ccbDestroy(&ccb); /* just decrement refcount */
}
return 0;
}
/*!
* ccbaStepChainsToPixCoords()
*
* Input: ccba (with step chains numaa of borders)
* coordtype (CCB_GLOBAL_COORDS or CCB_LOCAL_COORDS)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This uses the step chain data in each ccb to determine
* the pixel locations, either global or local,
* and stores them in the appropriate ptaa,
* either global or local. For the latter, the
* pixel locations are relative to the c.c.
*/
l_int32
ccbaStepChainsToPixCoords(CCBORDA *ccba,
l_int32 coordtype)
{
l_int32 ncc, nb, n, i, j, k;
l_int32 xul, yul, xstart, ystart, x, y, stepdir;
BOXA *boxa;
CCBORD *ccb;
NUMA *na;
NUMAA *naa;
PTAA *ptaan; /* new pix coord ptaa */
PTA *ptas, *ptan;
PROCNAME("ccbaStepChainsToPixCoords");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
if (coordtype != CCB_GLOBAL_COORDS && coordtype != CCB_LOCAL_COORDS)
return ERROR_INT("coordtype not valid", procName, 1);
ncc = ccbaGetCount(ccba); /* number of c.c. */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
if ((naa = ccb->step) == NULL)
return ERROR_INT("step numaa not found", procName, 1);
if ((boxa = ccb->boxa) == NULL)
return ERROR_INT("boxa not found", procName, 1);
if ((ptas = ccb->start) == NULL)
return ERROR_INT("start pta not found", procName, 1);
/* For global coords, get the (xul, yul) of the c.c.;
* otherwise, use relative coords. */
if (coordtype == CCB_LOCAL_COORDS) {
xul = 0;
yul = 0;
} else { /* coordtype == CCB_GLOBAL_COORDS */
/* Get UL corner in global coords */
if (boxaGetBoxGeometry(boxa, 0, &xul, &yul, NULL, NULL))
return ERROR_INT("bounding rectangle not found", procName, 1);
}
/* Make a new ptaa, removing any old one */
nb = numaaGetCount(naa); /* number of borders */
if ((ptaan = ptaaCreate(nb)) == NULL)
return ERROR_INT("ptaan not made", procName, 1);
if (coordtype == CCB_LOCAL_COORDS) {
if (ccb->local) /* remove old one */
ptaaDestroy(&ccb->local);
ccb->local = ptaan; /* save new local chain */
} else { /* coordtype == CCB_GLOBAL_COORDS */
if (ccb->global) /* remove old one */
ptaaDestroy(&ccb->global);
ccb->global = ptaan; /* save new global chain */
}
/* Iterate through the borders for this c.c. */
for (j = 0; j < nb; j++) {
na = numaaGetNuma(naa, j, L_CLONE);
n = numaGetCount(na); /* number of steps in border */
if ((ptan = ptaCreate(n + 1)) == NULL)
return ERROR_INT("ptan not made", procName, 1);
ptaaAddPta(ptaan, ptan, L_INSERT);
ptaGetIPt(ptas, j, &xstart, &ystart);
x = xul + xstart;
y = yul + ystart;
ptaAddPt(ptan, x, y);
for (k = 0; k < n; k++) {
numaGetIValue(na, k, &stepdir);
x += xpostab[stepdir];
y += ypostab[stepdir];
ptaAddPt(ptan, x, y);
}
numaDestroy(&na);
}
ccbDestroy(&ccb);
}
return 0;
}
/*!
* ccbaGenerateSPGlobalLocs()
*
* Input: ccba
* ptsflag (CCB_SAVE_ALL_PTS or CCB_SAVE_TURNING_PTS)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This calculates the splocal rep if not yet made.
* (2) It uses the local pixel values in splocal, the single
* path pta, which are all relative to each c.c., to find
* the corresponding global pixel locations, and stores
* them in the spglobal pta.
* (3) This lists only the turning points: it both makes a
* valid svg file and is typically about half the size
* when all border points are listed.
*/
l_int32
ccbaGenerateSPGlobalLocs(CCBORDA *ccba,
l_int32 ptsflag)
{
l_int32 ncc, npt, i, j, xul, yul, x, y, delx, dely;
l_int32 xp, yp, delxp, delyp; /* prev point and increments */
CCBORD *ccb;
PTA *ptal, *ptag;
PROCNAME("ccbaGenerateSPGlobalLocs");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
/* Make sure we have a local single path representation */
if ((ccb = ccbaGetCcb(ccba, 0)) == NULL)
return ERROR_INT("no ccb", procName, 1);
if (!ccb->splocal)
ccbaGenerateSinglePath(ccba);
ccbDestroy(&ccb); /* clone ref */
ncc = ccbaGetCount(ccba); /* number of c.c. */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
/* Get the UL corner in global coords, (xul, yul), of the c.c. */
if (boxaGetBoxGeometry(ccb->boxa, 0, &xul, &yul, NULL, NULL))
return ERROR_INT("bounding rectangle not found", procName, 1);
/* Make a new spglobal pta, removing any old one */
ptal = ccb->splocal;
npt = ptaGetCount(ptal); /* number of points */
if (ccb->spglobal) /* remove old one */
ptaDestroy(&ccb->spglobal);
if ((ptag = ptaCreate(npt)) == NULL)
return ERROR_INT("ptag not made", procName, 1);
ccb->spglobal = ptag; /* save new one */
/* Convert local to global */
if (ptsflag == CCB_SAVE_ALL_PTS) {
for (j = 0; j < npt; j++) {
ptaGetIPt(ptal, j, &x, &y);
ptaAddPt(ptag, x + xul, y + yul);
}
} else { /* ptsflag = CCB_SAVE_TURNING_PTS */
ptaGetIPt(ptal, 0, &xp, &yp); /* get the 1st pt */
ptaAddPt(ptag, xp + xul, yp + yul); /* save the 1st pt */
if (npt == 2) { /* get and save the 2nd pt */
ptaGetIPt(ptal, 1, &x, &y);
ptaAddPt(ptag, x + xul, y + yul);
} else if (npt > 2) {
ptaGetIPt(ptal, 1, &x, &y);
delxp = x - xp;
delyp = y - yp;
xp = x;
yp = y;
for (j = 2; j < npt; j++) {
ptaGetIPt(ptal, j, &x, &y);
delx = x - xp;
dely = y - yp;
if (delx != delxp || dely != delyp)
ptaAddPt(ptag, xp + xul, yp + yul);
xp = x;
yp = y;
delxp = delx;
delyp = dely;
}
ptaAddPt(ptag, xp + xul, yp + yul);
}
}
ccbDestroy(&ccb); /* clone ref */
}
return 0;
}
/*---------------------------------------------------------------------*
* Conversion to single path *
*---------------------------------------------------------------------*/
/*!
* ccbaGenerateSinglePath()
*
* Input: ccba
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) Generates a single border in local pixel coordinates.
* For each c.c., if there is just an outer border, copy it.
* If there are also hole borders, for each hole border,
* determine the smallest horizontal or vertical
* distance from the border to the outside of the c.c.,
* and find a path through the c.c. for this cut.
* We do this in a way that guarantees a pixel from the
* hole border is the starting point of the path, and
* we must verify that the path intersects the outer
* border (if it intersects it, then it ends on it).
* One can imagine pathological cases, but they may not
* occur in images of text characters and un-textured
* line graphics.
* (2) Once it is verified that the path through the c.c.
* intersects both the hole and outer borders, we
* generate the full single path for all borders in the
* c.c. Starting at the start point on the outer
* border, when we hit a line on a cut, we take
* the cut, do the hold border, and return on the cut
* to the outer border. We compose a pta of the
* outer border pts that are on cut paths, and for
* every point on the outer border (as we go around),
* we check against this pta. When we find a matching
* point in the pta, we do its cut path and hole border.
* The single path is saved in the ccb.
*/
l_int32
ccbaGenerateSinglePath(CCBORDA *ccba)
{
l_int32 i, j, k, ncc, nb, ncut, npt, dir, len, state, lostholes;
l_int32 x, y, xl, yl, xf, yf;
BOX *boxinner;
BOXA *boxa;
CCBORD *ccb;
PTA *pta, *ptac, *ptah;
PTA *ptahc; /* cyclic permutation of hole border, with end pts at cut */
PTA *ptas; /* output result: new single path for c.c. */
PTA *ptaf; /* points on the hole borders that intersect with cuts */
PTA *ptal; /* points on outer border that intersect with cuts */
PTA *ptap, *ptarp; /* path and reverse path between borders */
PTAA *ptaa;
PTAA *ptaap; /* ptaa for all paths between borders */
PROCNAME("ccbaGenerateSinglePath");
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
ncc = ccbaGetCount(ccba); /* number of c.c. */
lostholes = 0;
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
if ((ptaa = ccb->local) == NULL) {
L_WARNING("local pixel loc array not found\n", procName);
continue;
}
nb = ptaaGetCount(ptaa); /* number of borders in the c.c. */
/* Prepare the output pta */
if (ccb->splocal)
ptaDestroy(&ccb->splocal);
if ((ptas = ptaCreate(0)) == NULL)
return ERROR_INT("ptas not made", procName, 1);
ccb->splocal = ptas;
/* If no holes, just concat the outer border */
pta = ptaaGetPta(ptaa, 0, L_CLONE);
if (nb == 1 || nb > NMAX_HOLES + 1) {
ptaJoin(ptas, pta, 0, -1);
ptaDestroy(&pta); /* remove clone */
ccbDestroy(&ccb); /* remove clone */
continue;
}
/* Find the (nb - 1) cut paths that connect holes
* with outer border */
boxa = ccb->boxa;
if ((ptaap = ptaaCreate(nb - 1)) == NULL)
return ERROR_INT("ptaap not made", procName, 1);
if ((ptaf = ptaCreate(nb - 1)) == NULL)
return ERROR_INT("ptaf not made", procName, 1);
if ((ptal = ptaCreate(nb - 1)) == NULL)
return ERROR_INT("ptal not made", procName, 1);
for (j = 1; j < nb; j++) {
boxinner = boxaGetBox(boxa, j, L_CLONE);
/* Find a short path and store it */
ptac = getCutPathForHole(ccb->pix, pta, boxinner, &dir, &len);
if (len == 0) { /* bad: we lose the hole! */
lostholes++;
/* boxPrintStreamInfo(stderr, boxa->box[0]); */
}
ptaaAddPta(ptaap, ptac, L_INSERT);
/* fprintf(stderr, "dir = %d, length = %d\n", dir, len); */
/* ptaWriteStream(stderr, ptac, 1); */
/* Store the first and last points in the cut path,
* which must be on a hole border and the outer
* border, respectively */
ncut = ptaGetCount(ptac);
if (ncut == 0) { /* missed hole; neg coords won't match */
ptaAddPt(ptaf, -1, -1);
ptaAddPt(ptal, -1, -1);
} else {
ptaGetIPt(ptac, 0, &x, &y);
ptaAddPt(ptaf, x, y);
ptaGetIPt(ptac, ncut - 1, &x, &y);
ptaAddPt(ptal, x, y);
}
boxDestroy(&boxinner);
}
/* Make a single path for the c.c. using these connections */
npt = ptaGetCount(pta); /* outer border pts */
for (k = 0; k < npt; k++) {
ptaGetIPt(pta, k, &x, &y);
if (k == 0) { /* if there is a cut at the first point,
* we can wait until the end to take it */
ptaAddPt(ptas, x, y);
continue;
}
state = L_NOT_FOUND;
for (j = 0; j < nb - 1; j++) { /* iterate over cut end pts */
ptaGetIPt(ptal, j, &xl, &yl); /* cut point on outer border */
if (x == xl && y == yl) { /* take this cut to the hole */
state = L_FOUND;
ptap = ptaaGetPta(ptaap, j, L_CLONE);
if ((ptarp = ptaReverse(ptap, 1)) == NULL)
return ERROR_INT("ptarp not made", procName, 1);
/* Cut point on hole border: */
ptaGetIPt(ptaf, j, &xf, &yf);
/* Hole border: */
ptah = ptaaGetPta(ptaa, j + 1, L_CLONE);
ptahc = ptaCyclicPerm(ptah, xf, yf);
/* ptaWriteStream(stderr, ptahc, 1); */
ptaJoin(ptas, ptarp, 0, -1);
ptaJoin(ptas, ptahc, 0, -1);
ptaJoin(ptas, ptap, 0, -1);
ptaDestroy(&ptap);
ptaDestroy(&ptarp);
ptaDestroy(&ptah);
ptaDestroy(&ptahc);
break;
}
}
if (state == L_NOT_FOUND)
ptaAddPt(ptas, x, y);
}
/* ptaWriteStream(stderr, ptas, 1); */
ptaaDestroy(&ptaap);
ptaDestroy(&ptaf);
ptaDestroy(&ptal);
ptaDestroy(&pta); /* remove clone */
ccbDestroy(&ccb); /* remove clone */
}
if (lostholes > 0)
L_WARNING("***** %d lost holes *****\n", procName, lostholes);
return 0;
}
/*!
* getCutPathForHole()
*
* Input: pix (of c.c.)
* pta (of outer border)
* boxinner (b.b. of hole path)
* &dir (direction (0-3), returned; only needed for debug)
* &len (length of path, returned)
* Return: pta of pts on cut path from the hole border
* to the outer border, including end points on
* both borders; or null on error
*
* Notes:
* (1) If we don't find a path, we return a pta with no pts
* in it and len = 0.
* (2) The goal is to get a reasonably short path between the
* inner and outer borders, that goes entirely within the fg of
* the pix. This function is cheap-and-dirty, may fail for some
* holes in complex topologies such as those you might find in a
* moderately dark scanned halftone. If it fails to find a
* path to any particular hole, it gives a warning, and because
* that hole path is not included, the hole will not be rendered.
*/
PTA *
getCutPathForHole(PIX *pix,
PTA *pta,
BOX *boxinner,
l_int32 *pdir,
l_int32 *plen)
{
l_int32 w, h, nc, x, y, xl, yl, xmid, ymid;
l_uint32 val;
PTA *ptac;
PROCNAME("getCutPathForHole");
if (!pix)
return (PTA *)ERROR_PTR("pix not defined", procName, NULL);
if (!pta)
return (PTA *)ERROR_PTR("pta not defined", procName, NULL);
if (!boxinner)
return (PTA *)ERROR_PTR("boxinner not defined", procName, NULL);
w = pixGetWidth(pix);
h = pixGetHeight(pix);
if ((ptac = ptaCreate(4)) == NULL)
return (PTA *)ERROR_PTR("ptac not made", procName, NULL);
xmid = boxinner->x + boxinner->w / 2;
ymid = boxinner->y + boxinner->h / 2;
/* try top first */
for (y = ymid; y >= 0; y--) {
pixGetPixel(pix, xmid, y, &val);
if (val == 1) {
ptaAddPt(ptac, xmid, y);
break;
}
}
for (y = y - 1; y >= 0; y--) {
pixGetPixel(pix, xmid, y, &val);
if (val == 1)
ptaAddPt(ptac, xmid, y);
else
break;
}
nc = ptaGetCount(ptac);
ptaGetIPt(ptac, nc - 1, &xl, &yl);
if (ptaContainsPt(pta, xl, yl)) {
*pdir = 1;
*plen = nc;
return ptac;
}
/* Next try bottom */
ptaEmpty(ptac);
for (y = ymid; y < h; y++) {
pixGetPixel(pix, xmid, y, &val);
if (val == 1) {
ptaAddPt(ptac, xmid, y);
break;
}
}
for (y = y + 1; y < h; y++) {
pixGetPixel(pix, xmid, y, &val);
if (val == 1)
ptaAddPt(ptac, xmid, y);
else
break;
}
nc = ptaGetCount(ptac);
ptaGetIPt(ptac, nc - 1, &xl, &yl);
if (ptaContainsPt(pta, xl, yl)) {
*pdir = 3;
*plen = nc;
return ptac;
}
/* Next try left */
ptaEmpty(ptac);
for (x = xmid; x >= 0; x--) {
pixGetPixel(pix, x, ymid, &val);
if (val == 1) {
ptaAddPt(ptac, x, ymid);
break;
}
}
for (x = x - 1; x >= 0; x--) {
pixGetPixel(pix, x, ymid, &val);
if (val == 1)
ptaAddPt(ptac, x, ymid);
else
break;
}
nc = ptaGetCount(ptac);
ptaGetIPt(ptac, nc - 1, &xl, &yl);
if (ptaContainsPt(pta, xl, yl)) {
*pdir = 0;
*plen = nc;
return ptac;
}
/* Finally try right */
ptaEmpty(ptac);
for (x = xmid; x < w; x++) {
pixGetPixel(pix, x, ymid, &val);
if (val == 1) {
ptaAddPt(ptac, x, ymid);
break;
}
}
for (x = x + 1; x < w; x++) {
pixGetPixel(pix, x, ymid, &val);
if (val == 1)
ptaAddPt(ptac, x, ymid);
else
break;
}
nc = ptaGetCount(ptac);
ptaGetIPt(ptac, nc - 1, &xl, &yl);
if (ptaContainsPt(pta, xl, yl)) {
*pdir = 2;
*plen = nc;
return ptac;
}
/* If we get here, we've failed! */
ptaEmpty(ptac);
L_WARNING("no path found\n", procName);
*plen = 0;
return ptac;
}
/*---------------------------------------------------------------------*
* Border rendering *
*---------------------------------------------------------------------*/
/*!
* ccbaDisplayBorder()
*
* Input: ccba
* Return: pix of border pixels, or null on error
*
* Notes:
* (1) Uses global ptaa, which gives each border pixel in
* global coordinates, and must be computed in advance
* by calling ccbaGenerateGlobalLocs().
*/
PIX *
ccbaDisplayBorder(CCBORDA *ccba)
{
l_int32 ncc, nb, n, i, j, k, x, y;
CCBORD *ccb;
PIX *pixd;
PTAA *ptaa;
PTA *pta;
PROCNAME("ccbaDisplayBorder");
if (!ccba)
return (PIX *)ERROR_PTR("ccba not defined", procName, NULL);
if ((pixd = pixCreate(ccba->w, ccba->h, 1)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
ncc = ccbaGetCount(ccba); /* number of c.c. */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
if ((ptaa = ccb->global) == NULL) {
L_WARNING("global pixel loc array not found", procName);
continue;
}
nb = ptaaGetCount(ptaa); /* number of borders in the c.c. */
for (j = 0; j < nb; j++) {
pta = ptaaGetPta(ptaa, j, L_CLONE);
n = ptaGetCount(pta); /* number of pixels in the border */
for (k = 0; k < n; k++) {
ptaGetIPt(pta, k, &x, &y);
pixSetPixel(pixd, x, y, 1);
}
ptaDestroy(&pta);
}
ccbDestroy(&ccb);
}
return pixd;
}
/*!
* ccbaDisplaySPBorder()
*
* Input: ccba
* Return: pix of border pixels, or null on error
*
* Notes:
* (1) Uses spglobal pta, which gives each border pixel in
* global coordinates, one path per c.c., and must
* be computed in advance by calling ccbaGenerateSPGlobalLocs().
*/
PIX *
ccbaDisplaySPBorder(CCBORDA *ccba)
{
l_int32 ncc, npt, i, j, x, y;
CCBORD *ccb;
PIX *pixd;
PTA *ptag;
PROCNAME("ccbaDisplaySPBorder");
if (!ccba)
return (PIX *)ERROR_PTR("ccba not defined", procName, NULL);
if ((pixd = pixCreate(ccba->w, ccba->h, 1)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
ncc = ccbaGetCount(ccba); /* number of c.c. */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
if ((ptag = ccb->spglobal) == NULL) {
L_WARNING("spglobal pixel loc array not found\n", procName);
continue;
}
npt = ptaGetCount(ptag); /* number of pixels on path */
for (j = 0; j < npt; j++) {
ptaGetIPt(ptag, j, &x, &y);
pixSetPixel(pixd, x, y, 1);
}
ccbDestroy(&ccb); /* clone ref */
}
return pixd;
}
/*!
* ccbaDisplayImage1()
*
* Input: ccborda
* Return: pix of image, or null on error
*
* Notes:
* (1) Uses local ptaa, which gives each border pixel in
* local coordinates, so the actual pixel positions must
* be computed using all offsets.
* (2) For the holes, use coordinates relative to the c.c.
* (3) This is slower than Method 2.
* (4) This uses topological properties (Method 1) to do scan
* conversion to raster
*
* This algorithm deserves some commentary.
*
* I first tried the following:
* - outer borders: 4-fill from outside, stopping at the
* border, using pixFillClosedBorders()
* - inner borders: 4-fill from outside, stopping again
* at the border, XOR with the border, and invert
* to get the hole. This did not work, because if
* you have a hole border that looks like:
*
* x x x x x x
* x x
* x x x x x
* x x o x x
* x x
* x x
* x x x
*
* if you 4-fill from the outside, the pixel 'o' will
* not be filled! XORing with the border leaves it OFF.
* Inverting then gives a single bad ON pixel that is not
* actually part of the hole.
*
* So what you must do instead is 4-fill the holes from inside.
* You can do this from a seedfill, using a pix with the hole
* border as the filling mask. But you need to start with a
* pixel inside the hole. How is this determined? The best
* way is from the contour. We have a right-hand shoulder
* rule for inside (i.e., the filled region). Take the
* first 2 pixels of the hole border, and compute dx and dy
* (second coord minus first coord: dx = sx - fx, dy = sy - fy).
* There are 8 possibilities, depending on the values of dx and
* dy (which can each be -1, 0, and +1, but not both 0).
* These 8 cases can be broken into 4; see the simple algorithm below.
* Once you have an interior seed pixel, you fill from the seed,
* clipping with the hole border pix by filling into its invert.
*
* You then successively XOR these interior filled components, in any order.
*/
PIX *
ccbaDisplayImage1(CCBORDA *ccba)
{
l_int32 ncc, i, nb, n, j, k, x, y, xul, yul, xoff, yoff, w, h;
l_int32 fpx, fpy, spx, spy, xs, ys;
BOX *box;
BOXA *boxa;
CCBORD *ccb;
PIX *pixd, *pixt, *pixh;
PTAA *ptaa;
PTA *pta;
PROCNAME("ccbaDisplayImage1");
if (!ccba)
return (PIX *)ERROR_PTR("ccba not defined", procName, NULL);
if ((pixd = pixCreate(ccba->w, ccba->h, 1)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
ncc = ccbaGetCount(ccba);
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
if ((boxa = ccb->boxa) == NULL)
return (PIX *)ERROR_PTR("boxa not found", procName, NULL);
/* Render border in pixt */
if ((ptaa = ccb->local) == NULL) {
L_WARNING("local chain array not found\n", procName);
continue;
}
nb = ptaaGetCount(ptaa); /* number of borders in the c.c. */
for (j = 0; j < nb; j++) {
if ((box = boxaGetBox(boxa, j, L_CLONE)) == NULL)
return (PIX *)ERROR_PTR("b. box not found", procName, NULL);
if (j == 0) {
boxGetGeometry(box, &xul, &yul, &w, &h);
xoff = yoff = 0;
} else {
boxGetGeometry(box, &xoff, &yoff, &w, &h);
}
boxDestroy(&box);
/* Render the border in a minimum-sized pix;
* subtract xoff and yoff because the pixel
* location is stored relative to the c.c., but
* we need it relative to just the hole border. */
if ((pixt = pixCreate(w, h, 1)) == NULL)
return (PIX *)ERROR_PTR("pixt not made", procName, NULL);
pta = ptaaGetPta(ptaa, j, L_CLONE);
n = ptaGetCount(pta); /* number of pixels in the border */
for (k = 0; k < n; k++) {
ptaGetIPt(pta, k, &x, &y);
pixSetPixel(pixt, x - xoff, y - yoff, 1);
if (j > 0) { /* need this for finding hole border pixel */
if (k == 0) {
fpx = x - xoff;
fpy = y - yoff;
}
if (k == 1) {
spx = x - xoff;
spy = y - yoff;
}
}
}
ptaDestroy(&pta);
/* Get the filled component */
if (j == 0) { /* if outer border, fill from outer boundary */
if ((pixh = pixFillClosedBorders(pixt, 4)) == NULL)
return (PIX *)ERROR_PTR("pixh not made", procName, NULL);
} else { /* fill the hole from inside */
/* get the location of a seed pixel in the hole */
locateOutsideSeedPixel(fpx, fpy, spx, spy, &xs, &ys);
/* Put seed in hole and fill interior of hole,
* using pixt as clipping mask */
if ((pixh = pixCreateTemplate(pixt)) == NULL)
return (PIX *)ERROR_PTR("pixh not made", procName, NULL);
pixSetPixel(pixh, xs, ys, 1); /* put seed pixel in hole */
pixInvert(pixt, pixt); /* to make filling mask */
pixSeedfillBinary(pixh, pixh, pixt, 4); /* 4-fill hole */
}
/* XOR into the dest */
pixRasterop(pixd, xul + xoff, yul + yoff, w, h, PIX_XOR,
pixh, 0, 0);
pixDestroy(&pixt);
pixDestroy(&pixh);
}
ccbDestroy(&ccb);
}
return pixd;
}
/*!
* ccbaDisplayImage2()
*
* Input: ccborda
* Return: pix of image, or null on error
*
* Notes:
* (1) Uses local chain ptaa, which gives each border pixel in
* local coordinates, so the actual pixel positions must
* be computed using all offsets.
* (2) Treats exterior and hole borders on equivalent
* footing, and does all calculations on a pix
* that spans the c.c. with a 1 pixel added boundary.
* (3) This uses topological properties (Method 2) to do scan
* conversion to raster
* (4) The algorithm is described at the top of this file (Method 2).
* It is preferred to Method 1 because it is between 1.2x and 2x
* faster than Method 1.
*/
PIX *
ccbaDisplayImage2(CCBORDA *ccba)
{
l_int32 ncc, nb, n, i, j, k, x, y, xul, yul, w, h;
l_int32 fpx, fpy, spx, spy, xs, ys;
BOXA *boxa;
CCBORD *ccb;
PIX *pixd, *pixc, *pixs;
PTAA *ptaa;
PTA *pta;
PROCNAME("ccbaDisplayImage2");
if (!ccba)
return (PIX *)ERROR_PTR("ccba not defined", procName, NULL);
if ((pixd = pixCreate(ccba->w, ccba->h, 1)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
ncc = ccbaGetCount(ccba);
for (i = 0; i < ncc; i++) {
/* Generate clipping mask from border pixels and seed image
* from one seed for each closed border. */
ccb = ccbaGetCcb(ccba, i);
if ((boxa = ccb->boxa) == NULL)
return (PIX *)ERROR_PTR("boxa not found", procName, NULL);
if (boxaGetBoxGeometry(boxa, 0, &xul, &yul, &w, &h))
return (PIX *)ERROR_PTR("b. box not found", procName, NULL);
if ((pixc = pixCreate(w + 2, h + 2, 1)) == NULL)
return (PIX *)ERROR_PTR("pixc not made", procName, NULL);
if ((pixs = pixCreateTemplate(pixc)) == NULL)
return (PIX *)ERROR_PTR("pixs not made", procName, NULL);
if ((ptaa = ccb->local) == NULL) {
L_WARNING("local chain array not found\n", procName);
continue;
}
nb = ptaaGetCount(ptaa); /* number of borders in the c.c. */
for (j = 0; j < nb; j++) {
pta = ptaaGetPta(ptaa, j, L_CLONE);
n = ptaGetCount(pta); /* number of pixels in the border */
/* Render border pixels in pixc */
for (k = 0; k < n; k++) {
ptaGetIPt(pta, k, &x, &y);
pixSetPixel(pixc, x + 1, y + 1, 1);
if (k == 0) {
fpx = x + 1;
fpy = y + 1;
} else if (k == 1) {
spx = x + 1;
spy = y + 1;
}
}
/* Get and set seed pixel for this border in pixs */
if (n > 1)
locateOutsideSeedPixel(fpx, fpy, spx, spy, &xs, &ys);
else /* isolated c.c. */
xs = ys = 0;
pixSetPixel(pixs, xs, ys, 1);
ptaDestroy(&pta);
}
/* Fill from seeds in pixs, using pixc as the clipping mask,
* to reconstruct the c.c. */
pixInvert(pixc, pixc); /* to convert clipping -> filling mask */
pixSeedfillBinary(pixs, pixs, pixc, 4); /* 4-fill */
pixInvert(pixs, pixs); /* to make the c.c. */
/* XOR into the dest */
pixRasterop(pixd, xul, yul, w, h, PIX_XOR, pixs, 1, 1);
pixDestroy(&pixc);
pixDestroy(&pixs);
ccbDestroy(&ccb); /* ref-counted */
}
return pixd;
}
/*---------------------------------------------------------------------*
* Serialize for I/O *
*---------------------------------------------------------------------*/
/*!
* ccbaWrite()
*
* Input: filename
* ccba
* Return: 0 if OK, 1 on error
*/
l_int32
ccbaWrite(const char *filename,
CCBORDA *ccba)
{
FILE *fp;
PROCNAME("ccbaWrite");
if (!filename)
return ERROR_INT("filename not defined", procName, 1);
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
if ((fp = fopenWriteStream(filename, "wb+")) == NULL)
return ERROR_INT("stream not opened", procName, 1);
if (ccbaWriteStream(fp, ccba)) {
fclose(fp);
return ERROR_INT("ccba not written to stream", procName, 1);
}
fclose(fp);
return 0;
}
/*!
* ccbaWriteStream()
*
* Input: stream
* ccba
* Return: 0 if OK; 1 on error
*
* Format: ccba: %7d cc\n (num. c.c.) (ascii) (18B)
* pix width (4B)
* pix height (4B)
* [for i = 1, ncc]
* ulx (4B)
* uly (4B)
* w (4B) -- not req'd for reconstruction
* h (4B) -- not req'd for reconstruction
* number of borders (4B)
* [for j = 1, nb]
* startx (4B)
* starty (4B)
* [for k = 1, nb]
* 2 steps (1B)
* end in z8 or 88 (1B)
*/
l_int32
ccbaWriteStream(FILE *fp,
CCBORDA *ccba)
{
char strbuf[256];
l_uint8 bval;
l_uint8 *datain, *dataout;
l_int32 i, j, k, bx, by, bw, bh, val, startx, starty;
l_int32 ncc, nb, n;
l_uint32 w, h;
size_t inbytes, outbytes;
BBUFFER *bbuf;
CCBORD *ccb;
NUMA *na;
NUMAA *naa;
PTA *pta;
PROCNAME("ccbaWriteStream");
#if !HAVE_LIBZ /* defined in environ.h */
return ERROR_INT("no libz: can't write data", procName, 1);
#else
if (!fp)
return ERROR_INT("stream not open", procName, 1);
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
if ((bbuf = bbufferCreate(NULL, 1000)) == NULL)
return ERROR_INT("bbuf not made", procName, 1);
ncc = ccbaGetCount(ccba);
sprintf(strbuf, "ccba: %7d cc\n", ncc);
bbufferRead(bbuf, (l_uint8 *)strbuf, 18);
w = pixGetWidth(ccba->pix);
h = pixGetHeight(ccba->pix);
bbufferRead(bbuf, (l_uint8 *)&w, 4); /* width */
bbufferRead(bbuf, (l_uint8 *)&h, 4); /* height */
for (i = 0; i < ncc; i++) {
ccb = ccbaGetCcb(ccba, i);
if (boxaGetBoxGeometry(ccb->boxa, 0, &bx, &by, &bw, &bh))
return ERROR_INT("bounding box not found", procName, 1);
bbufferRead(bbuf, (l_uint8 *)&bx, 4); /* ulx of c.c. */
bbufferRead(bbuf, (l_uint8 *)&by, 4); /* uly of c.c. */
bbufferRead(bbuf, (l_uint8 *)&bw, 4); /* w of c.c. */
bbufferRead(bbuf, (l_uint8 *)&bh, 4); /* h of c.c. */
if ((naa = ccb->step) == NULL) {
ccbaGenerateStepChains(ccba);
naa = ccb->step;
}
nb = numaaGetCount(naa);
bbufferRead(bbuf, (l_uint8 *)&nb, 4); /* number of borders in c.c. */
pta = ccb->start;
for (j = 0; j < nb; j++) {
ptaGetIPt(pta, j, &startx, &starty);
bbufferRead(bbuf, (l_uint8 *)&startx, 4); /* starting x in border */
bbufferRead(bbuf, (l_uint8 *)&starty, 4); /* starting y in border */
na = numaaGetNuma(naa, j, L_CLONE);
n = numaGetCount(na);
for (k = 0; k < n; k++) {
numaGetIValue(na, k, &val);
if (k % 2 == 0)
bval = (l_uint8)val << 4;
else
bval |= (l_uint8)val;
if (k % 2 == 1)
bbufferRead(bbuf, (l_uint8 *)&bval, 1); /* 2 border steps */
}
if (n % 2 == 1) {
bval |= 0x8;
bbufferRead(bbuf, (l_uint8 *)&bval, 1); /* end with 0xz8, */
/* where z = {0..7} */
} else { /* n % 2 == 0 */
bval = 0x88;
bbufferRead(bbuf, (l_uint8 *)&bval, 1); /* end with 0x88 */
}
numaDestroy(&na);
}
ccbDestroy(&ccb);
}
datain = bbufferDestroyAndSaveData(&bbuf, &inbytes);
dataout = zlibCompress(datain, inbytes, &outbytes);
fwrite(dataout, 1, outbytes, fp);
FREE(datain);
FREE(dataout);
return 0;
#endif /* !HAVE_LIBZ */
}
/*!
* ccbaRead()
*
* Input: filename
* Return: ccba, or null on error
*/
CCBORDA *
ccbaRead(const char *filename)
{
FILE *fp;
CCBORDA *ccba;
PROCNAME("ccbaRead");
if (!filename)
return (CCBORDA *)ERROR_PTR("filename not defined", procName, NULL);
if ((fp = fopenReadStream(filename)) == NULL)
return (CCBORDA *)ERROR_PTR("stream not opened", procName, NULL);
ccba = ccbaReadStream(fp);
fclose(fp);
if (!ccba)
return (CCBORDA *)ERROR_PTR("ccba not returned", procName, NULL);
return ccba;
}
/*!
* ccbaReadStream()
*
* Input: stream
* Return: ccba, or null on error
*
* Format: ccba: %7d cc\n (num. c.c.) (ascii) (17B)
* pix width (4B)
* pix height (4B)
* [for i = 1, ncc]
* ulx (4B)
* uly (4B)
* w (4B) -- not req'd for reconstruction
* h (4B) -- not req'd for reconstruction
* number of borders (4B)
* [for j = 1, nb]
* startx (4B)
* starty (4B)
* [for k = 1, nb]
* 2 steps (1B)
* end in z8 or 88 (1B)
*/
CCBORDA *
ccbaReadStream(FILE *fp)
{
char strbuf[256];
l_uint8 bval;
l_uint8 *datain, *dataout;
l_int32 i, j, startx, starty;
l_int32 offset, nib1, nib2;
l_int32 ncc, nb;
l_uint32 width, height, w, h, xoff, yoff;
size_t inbytes, outbytes;
BOX *box;
CCBORD *ccb;
CCBORDA *ccba;
NUMA *na;
NUMAA *step;
PROCNAME("ccbaReadStream");
#if !HAVE_LIBZ /* defined in environ.h */
return (CCBORDA *)ERROR_PTR("no libz: can't read data", procName, NULL);
#else
if (!fp)
return (CCBORDA *)ERROR_PTR("stream not open", procName, NULL);
if ((datain = l_binaryReadStream(fp, &inbytes)) == NULL)
return (CCBORDA *)ERROR_PTR("data not read from file", procName, NULL);
if ((dataout = zlibUncompress(datain, inbytes, &outbytes)) == NULL)
return (CCBORDA *)ERROR_PTR("dataout not made", procName, NULL);
offset = 18;
memcpy((void *)strbuf, (void *)dataout, offset);
strbuf[17] = '\0';
if (strncmp(strbuf, "ccba:", 5))
return (CCBORDA *)ERROR_PTR("file not type ccba", procName, NULL);
sscanf(strbuf, "ccba: %7d cc\n", &ncc);
/* fprintf(stderr, "ncc = %d\n", ncc); */
if ((ccba = ccbaCreate(NULL, ncc)) == NULL)
return (CCBORDA *)ERROR_PTR("ccba not made", procName, NULL);
memcpy((void *)&width, (void *)(dataout + offset), 4);
offset += 4;
memcpy((void *)&height, (void *)(dataout + offset), 4);
offset += 4;
ccba->w = width;
ccba->h = height;
/* fprintf(stderr, "width = %d, height = %d\n", width, height); */
for (i = 0; i < ncc; i++) { /* should be ncc */
if ((ccb = ccbCreate(NULL)) == NULL)
return (CCBORDA *)ERROR_PTR("ccb not made", procName, NULL);
ccbaAddCcb(ccba, ccb);
memcpy((void *)&xoff, (void *)(dataout + offset), 4);
offset += 4;
memcpy((void *)&yoff, (void *)(dataout + offset), 4);
offset += 4;
memcpy((void *)&w, (void *)(dataout + offset), 4);
offset += 4;
memcpy((void *)&h, (void *)(dataout + offset), 4);
offset += 4;
if ((box = boxCreate(xoff, yoff, w, h)) == NULL)
return (CCBORDA *)ERROR_PTR("box not made", procName, NULL);
boxaAddBox(ccb->boxa, box, L_INSERT);
/* fprintf(stderr, "xoff = %d, yoff = %d, w = %d, h = %d\n",
xoff, yoff, w, h); */
memcpy((void *)&nb, (void *)(dataout + offset), 4);
offset += 4;
/* fprintf(stderr, "num borders = %d\n", nb); */
if ((step = numaaCreate(nb)) == NULL)
return (CCBORDA *)ERROR_PTR("step numaa not made", procName, NULL);
ccb->step = step;
for (j = 0; j < nb; j++) { /* should be nb */
memcpy((void *)&startx, (void *)(dataout + offset), 4);
offset += 4;
memcpy((void *)&starty, (void *)(dataout + offset), 4);
offset += 4;
ptaAddPt(ccb->start, startx, starty);
/* fprintf(stderr, "startx = %d, starty = %d\n", startx, starty); */
if ((na = numaCreate(0)) == NULL)
return (CCBORDA *)ERROR_PTR("na not made", procName, NULL);
numaaAddNuma(step, na, L_INSERT);
while(1) {
bval = *(dataout + offset);
offset++;
nib1 = (bval >> 4);
nib2 = bval & 0xf;
if (nib1 != 8)
numaAddNumber(na, nib1);
else
break;
if (nib2 != 8)
numaAddNumber(na, nib2);
else
break;
}
}
}
FREE(datain);
FREE(dataout);
return ccba;
#endif /* !HAVE_LIBZ */
}
/*---------------------------------------------------------------------*
* SVG Output *
*---------------------------------------------------------------------*/
/*!
* ccbaWriteSVG()
*
* Input: filename
* ccba
* Return: 0 if OK, 1 on error
*/
l_int32
ccbaWriteSVG(const char *filename,
CCBORDA *ccba)
{
char *svgstr;
PROCNAME("ccbaWriteSVG");
if (!filename)
return ERROR_INT("filename not defined", procName, 1);
if (!ccba)
return ERROR_INT("ccba not defined", procName, 1);
if ((svgstr = ccbaWriteSVGString(filename, ccba)) == NULL)
return ERROR_INT("svgstr not made", procName, 1);
l_binaryWrite(filename, "w", svgstr, strlen(svgstr));
FREE(svgstr);
return 0;
}
/*!
* ccbaWriteSVGString()
*
* Input: filename
* ccba
* Return: string in svg-formatted, that can be written to file,
* or null on error.
*/
char *
ccbaWriteSVGString(const char *filename,
CCBORDA *ccba)
{
char *svgstr;
char smallbuf[256];
char line0[] = "<?xml version=\"1.0\" encoding=\"iso-8859-1\"?>";
char line1[] = "<!DOCTYPE svg PUBLIC \"-//W3C//DTD SVG 20000303 Stylable//EN\" \"http://www.w3.org/TR/2000/03/WD-SVG-20000303/DTD/svg-20000303-stylable.dtd\">";
char line2[] = "<svg>";
char line3[] = "<polygon style=\"stroke-width:1;stroke:black;\" points=\"";
char line4[] = "\" />";
char line5[] = "</svg>";
char space[] = " ";
l_int32 i, j, ncc, npt, x, y;
CCBORD *ccb;
PTA *pta;
SARRAY *sa;
PROCNAME("ccbaWriteSVGString");
if (!filename)
return (char *)ERROR_PTR("filename not defined", procName, NULL);
if (!ccba)
return (char *)ERROR_PTR("ccba not defined", procName, NULL);
if ((sa = sarrayCreate(0)) == NULL)
return (char *)ERROR_PTR("sa not made", procName, NULL);
sarrayAddString(sa, line0, 1);
sarrayAddString(sa, line1, 1);
sarrayAddString(sa, line2, 1);
ncc = ccbaGetCount(ccba);
for (i = 0; i < ncc; i++) {
if ((ccb = ccbaGetCcb(ccba, i)) == NULL)
return (char *)ERROR_PTR("ccb not found", procName, NULL);
if ((pta = ccb->spglobal) == NULL)
return (char *)ERROR_PTR("spglobal not made", procName, NULL);
sarrayAddString(sa, line3, 1);
npt = ptaGetCount(pta);
for (j = 0; j < npt; j++) {
ptaGetIPt(pta, j, &x, &y);
sprintf(smallbuf, "%0d,%0d", x, y);
sarrayAddString(sa, smallbuf, 1);
}
sarrayAddString(sa, line4, 1);
ccbDestroy(&ccb);
}
sarrayAddString(sa, line5, 1);
sarrayAddString(sa, space, 1);
svgstr = sarrayToString(sa, 1);
/* fprintf(stderr, "%s", svgstr); */
sarrayDestroy(&sa);
return svgstr;
}