third-party/leptonica/src/psio1.c
/*====================================================================*
- Copyright (C) 2001 Leptonica. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials
- provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANY
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
- OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*====================================================================*/
/*
* psio1.c
*
* |=============================================================|
* | Important note |
* |=============================================================|
* | Some of these functions require libtiff, libjpeg and libz. |
* | If you do not have these libraries, you must set |
* | #define USE_PSIO 0 |
* | in environ.h. This will link psio1stub.c |
* |=============================================================|
*
* This is a PostScript "device driver" for wrapping images
* in PostScript. The images can be rendered by a PostScript
* interpreter for viewing, using evince or gv. They can also be
* rasterized for printing, using gs or an embedded interpreter
* in a PostScript printer. And they can be converted to a pdf
* using gs (ps2pdf).
*
* Convert specified files to PS
* l_int32 convertFilesToPS()
* l_int32 sarrayConvertFilesToPS()
* l_int32 convertFilesFittedToPS()
* l_int32 sarrayConvertFilesFittedToPS()
* l_int32 writeImageCompressedToPSFile()
*
* Convert mixed text/image files to PS
* l_int32 convertSegmentedPagesToPS()
* l_int32 pixWriteSegmentedPageToPS()
* l_int32 pixWriteMixedToPS()
*
* Convert any image file to PS for embedding
* l_int32 convertToPSEmbed()
*
* Write all images in a pixa out to PS
* l_int32 pixaWriteCompressedToPS()
*
* These PostScript converters are used in three different ways.
*
* (1) For embedding a PS file in a program like TeX.
* convertToPSEmbed() handles this for levels 1, 2 and 3 output,
* and prog/converttops wraps this in an executable.
* converttops is a generalization of Thomas Merz's jpeg2ps wrapper,
* in that it works for all types (formats, depth, colormap)
* of input images and gives PS output in one of these formats
* * level 1 (uncompressed)
* * level 2 (compressed ccittg4 or dct)
* * level 3 (compressed flate)
*
* (2) For composing a set of pages with any number of images
* painted on them, in either level 2 or level 3 formats.
*
* (3) For printing a page image or a set of page images, at a
* resolution that optimally fills the page, using
* convertFilesFittedToPS().
*
* The top-level calls of utilities in category 2, which can compose
* multiple images on a page, and which generate a PostScript file for
* printing or display (e.g., conversion to pdf), are:
* convertFilesToPS()
* convertFilesFittedToPS()
* convertSegmentedPagesToPS()
*
* All images are output with page numbers. Bounding box hints are
* more subtle. They must be included for embeding images in
* TeX, for example, and the low-level writers include bounding
* box hints by default. However, these hints should not be included for
* multi-page PostScript that is composed of a sequence of images;
* consequently, they are not written when calling higher level
* functions such as convertFilesToPS(), convertFilesFittedToPS()
* and convertSegmentedPagesToPS(). The function l_psWriteBoundingBox()
* sets a flag to give low-level control over this.
*/
#include <string.h>
#include "allheaders.h"
/* --------------------------------------------*/
#if USE_PSIO /* defined in environ.h */
/* --------------------------------------------*/
/*-------------------------------------------------------------*
* Convert files in a directory to PS *
*-------------------------------------------------------------*/
/*
* convertFilesToPS()
*
* Input: dirin (input directory)
* substr (<optional> substring filter on filenames; can be NULL)
* res (typ. 300 or 600 ppi)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This generates a PS file for all image files in a specified
* directory that contain the substr pattern to be matched.
* (2) Each image is written to a separate page in the output PS file.
* (3) All images are written compressed:
* * if tiffg4 --> use ccittg4
* * if jpeg --> use dct
* * all others --> use flate
* If the image is jpeg or tiffg4, we use the existing compressed
* strings for the encoding; otherwise, we read the image into
* a pix and flate-encode the pieces.
* (4) The resolution is often confusing. It is interpreted
* as the resolution of the output display device: "If the
* input image were digitized at 300 ppi, what would it
* look like when displayed at res ppi." So, for example,
* if res = 100 ppi, then the display pixels are 3x larger
* than the 300 ppi pixels, and the image will be rendered
* 3x larger.
* (5) The size of the PostScript file is independent of the resolution,
* because the entire file is encoded. The res parameter just
* tells the PS decomposer how to render the page. Therefore,
* for minimum file size without loss of visual information,
* if the output res is less than 300, you should downscale
* the image to the output resolution before wrapping in PS.
* (6) The "canvas" on which the image is rendered, at the given
* output resolution, is a standard page size (8.5 x 11 in).
*/
l_int32
convertFilesToPS(const char *dirin,
const char *substr,
l_int32 res,
const char *fileout)
{
SARRAY *sa;
PROCNAME("convertFilesToPS");
if (!dirin)
return ERROR_INT("dirin not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (res <= 0) {
L_INFO("setting res to 300 ppi\n", procName);
res = 300;
}
if (res < 10 || res > 4000)
L_WARNING("res is typically in the range 300-600 ppi\n", procName);
/* Get all filtered and sorted full pathnames. */
sa = getSortedPathnamesInDirectory(dirin, substr, 0, 0);
/* Generate the PS file. Don't use bounding boxes. */
l_psWriteBoundingBox(FALSE);
sarrayConvertFilesToPS(sa, res, fileout);
l_psWriteBoundingBox(TRUE);
sarrayDestroy(&sa);
return 0;
}
/*
* sarrayConvertFilesToPS()
*
* Input: sarray (of full path names)
* res (typ. 300 or 600 ppi)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) See convertFilesToPS()
*/
l_int32
sarrayConvertFilesToPS(SARRAY *sa,
l_int32 res,
const char *fileout)
{
char *fname;
l_int32 i, nfiles, index, firstfile, ret, format;
PROCNAME("sarrayConvertFilesToPS");
if (!sa)
return ERROR_INT("sa not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (res <= 0) {
L_INFO("setting res to 300 ppi\n", procName);
res = 300;
}
if (res < 10 || res > 4000)
L_WARNING("res is typically in the range 300-600 ppi\n", procName);
nfiles = sarrayGetCount(sa);
firstfile = TRUE;
for (i = 0, index = 0; i < nfiles; i++) {
fname = sarrayGetString(sa, i, L_NOCOPY);
ret = pixReadHeader(fname, &format, NULL, NULL, NULL, NULL, NULL);
if (ret) continue;
if (format == IFF_UNKNOWN)
continue;
writeImageCompressedToPSFile(fname, fileout, res, &firstfile, &index);
}
return 0;
}
/*
* convertFilesFittedToPS()
*
* Input: dirin (input directory)
* substr (<optional> substring filter on filenames; can be NULL)
* xpts, ypts (desired size in printer points; use 0 for default)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This generates a PS file for all files in a specified directory
* that contain the substr pattern to be matched.
* (2) Each image is written to a separate page in the output PS file.
* (3) All images are written compressed:
* * if tiffg4 --> use ccittg4
* * if jpeg --> use dct
* * all others --> use flate
* If the image is jpeg or tiffg4, we use the existing compressed
* strings for the encoding; otherwise, we read the image into
* a pix and flate-encode the pieces.
* (4) The resolution is internally determined such that the images
* are rendered, in at least one direction, at 100% of the given
* size in printer points. Use 0.0 for xpts or ypts to get
* the default value, which is 612.0 or 792.0, rsp.
* (5) The size of the PostScript file is independent of the resolution,
* because the entire file is encoded. The @xpts and @ypts
* parameter tells the PS decomposer how to render the page.
*/
l_int32
convertFilesFittedToPS(const char *dirin,
const char *substr,
l_float32 xpts,
l_float32 ypts,
const char *fileout)
{
SARRAY *sa;
PROCNAME("convertFilesFittedToPS");
if (!dirin)
return ERROR_INT("dirin not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (xpts <= 0.0) {
L_INFO("setting xpts to 612.0 ppi\n", procName);
xpts = 612.0;
}
if (ypts <= 0.0) {
L_INFO("setting ypts to 792.0 ppi\n", procName);
ypts = 792.0;
}
if (xpts < 100.0 || xpts > 2000.0 || ypts < 100.0 || ypts > 2000.0)
L_WARNING("xpts,ypts are typically in the range 500-800\n", procName);
/* Get all filtered and sorted full pathnames. */
sa = getSortedPathnamesInDirectory(dirin, substr, 0, 0);
/* Generate the PS file. Don't use bounding boxes. */
l_psWriteBoundingBox(FALSE);
sarrayConvertFilesFittedToPS(sa, xpts, ypts, fileout);
l_psWriteBoundingBox(TRUE);
sarrayDestroy(&sa);
return 0;
}
/*
* sarrayConvertFilesFittedToPS()
*
* Input: sarray (of full path names)
* xpts, ypts (desired size in printer points; use 0 for default)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) See convertFilesFittedToPS()
*/
l_int32
sarrayConvertFilesFittedToPS(SARRAY *sa,
l_float32 xpts,
l_float32 ypts,
const char *fileout)
{
char *fname;
l_int32 ret, i, w, h, nfiles, index, firstfile, format, res;
PROCNAME("sarrayConvertFilesFittedToPS");
if (!sa)
return ERROR_INT("sa not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (xpts <= 0.0) {
L_INFO("setting xpts to 612.0\n", procName);
xpts = 612.0;
}
if (ypts <= 0.0) {
L_INFO("setting ypts to 792.0\n", procName);
ypts = 792.0;
}
if (xpts < 100.0 || xpts > 2000.0 || ypts < 100.0 || ypts > 2000.0)
L_WARNING("xpts,ypts are typically in the range 500-800\n", procName);
nfiles = sarrayGetCount(sa);
firstfile = TRUE;
for (i = 0, index = 0; i < nfiles; i++) {
fname = sarrayGetString(sa, i, L_NOCOPY);
ret = pixReadHeader(fname, &format, &w, &h, NULL, NULL, NULL);
if (ret) continue;
if (format == IFF_UNKNOWN)
continue;
/* Be sure the entire image is wrapped */
if (xpts * h < ypts * w)
res = (l_int32)((l_float32)w * 72.0 / xpts);
else
res = (l_int32)((l_float32)h * 72.0 / ypts);
writeImageCompressedToPSFile(fname, fileout, res, &firstfile, &index);
}
return 0;
}
/*
* writeImageCompressedToPSFile()
*
* Input: filein (input image file)
* fileout (output ps file)
* res (output printer resolution)
* &firstfile (<input and return> 1 if the first image;
* 0 otherwise)
* &index (<input and return> index of image in output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This wraps a single page image in PS.
* (2) The input file can be in any format. It is compressed as follows:
* * if in tiffg4 --> use ccittg4
* * if in jpeg --> use dct
* * all others --> use flate
* (3) Before the first call, set @firstpage = 1. After writing
* the first page, it will be set to 0.
* (4) @index is incremented if the page is successfully written.
*/
l_int32
writeImageCompressedToPSFile(const char *filein,
const char *fileout,
l_int32 res,
l_int32 *pfirstfile,
l_int32 *pindex)
{
const char *op;
l_int32 format, retval;
PROCNAME("writeImageCompressedToPSFile");
if (!pfirstfile || !pindex)
return ERROR_INT("&firstfile and &index not defined", procName, 1);
findFileFormat(filein, &format);
if (format == IFF_UNKNOWN) {
L_ERROR("format of %s not known\n", procName, filein);
return 1;
}
op = (*pfirstfile == TRUE) ? "w" : "a";
if (format == IFF_JFIF_JPEG) {
retval = convertJpegToPS(filein, fileout, op, 0, 0,
res, 1.0, *pindex + 1, TRUE);
if (retval == 0) {
*pfirstfile = FALSE;
(*pindex)++;
}
} else if (format == IFF_TIFF_G4) {
retval = convertG4ToPS(filein, fileout, op, 0, 0,
res, 1.0, *pindex + 1, FALSE, TRUE);
if (retval == 0) {
*pfirstfile = FALSE;
(*pindex)++;
}
} else { /* all other image formats */
retval = convertFlateToPS(filein, fileout, op, 0, 0,
res, 1.0, *pindex + 1, TRUE);
if (retval == 0) {
*pfirstfile = FALSE;
(*pindex)++;
}
}
return retval;
}
/*-------------------------------------------------------------*
* Convert mixed text/image files to PS *
*-------------------------------------------------------------*/
/*
* convertSegmentedPagesToPS()
*
* Input: pagedir (input page image directory)
* pagestr (<optional> substring filter on page filenames;
* can be NULL)
* page_numpre (number of characters in page name before number)
* maskdir (input mask image directory)
* maskstr (<optional> substring filter on mask filenames;
* can be NULL)
* mask_numpre (number of characters in mask name before number)
* numpost (number of characters in names after number)
* maxnum (only consider page numbers up to this value)
* textscale (scale of text output relative to pixs)
* imagescale (scale of image output relative to pixs)
* threshold (for binarization; typ. about 190; 0 for default)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This generates a PS file for all page image and mask files in two
* specified directories and that contain the page numbers as
* specified below. The two directories can be the same, in which
* case the page and mask files are differentiated by the two
* substrings for string matches.
* (2) The page images are taken in lexicographic order.
* Mask images whose numbers match the page images are used to
* segment the page images. Page images without a matching
* mask image are scaled, thresholded and rendered entirely as text.
* (3) Each PS page is generated as a compressed representation of
* the page image, where the part of the image under the mask
* is suitably scaled and compressed as DCT (i.e., jpeg), and
* the remaining part of the page is suitably scaled, thresholded,
* compressed as G4 (i.e., tiff g4), and rendered by painting
* black through the resulting text mask.
* (4) The scaling is typically 2x down for the DCT component
* (@imagescale = 0.5) and 2x up for the G4 component
* (@textscale = 2.0).
* (5) The resolution is automatically set to fit to a
* letter-size (8.5 x 11 inch) page.
* (6) Both the DCT and the G4 encoding are PostScript level 2.
* (7) It is assumed that the page number is contained within
* the basename (the filename without directory or extension).
* @page_numpre is the number of characters in the page basename
* preceeding the actual page number; @mask_numpre is likewise for
* the mask basename; @numpost is the number of characters
* following the page number. For example, for mask name
* mask_006.tif, mask_numpre = 5 ("mask_).
* (8) To render a page as is -- that is, with no thresholding
* of any pixels -- use a mask in the mask directory that is
* full size with all pixels set to 1. If the page is 1 bpp,
* it is not necessary to have a mask.
*/
l_int32
convertSegmentedPagesToPS(const char *pagedir,
const char *pagestr,
l_int32 page_numpre,
const char *maskdir,
const char *maskstr,
l_int32 mask_numpre,
l_int32 numpost,
l_int32 maxnum,
l_float32 textscale,
l_float32 imagescale,
l_int32 threshold,
const char *fileout)
{
l_int32 pageno, i, npages;
PIX *pixs, *pixm;
SARRAY *sapage, *samask;
PROCNAME("convertSegmentedPagesToPS");
if (!pagedir)
return ERROR_INT("pagedir not defined", procName, 1);
if (!maskdir)
return ERROR_INT("maskdir not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (threshold <= 0) {
L_INFO("setting threshold to 190\n", procName);
threshold = 190;
}
/* Get numbered full pathnames; max size of sarray is maxnum */
sapage = getNumberedPathnamesInDirectory(pagedir, pagestr,
page_numpre, numpost, maxnum);
samask = getNumberedPathnamesInDirectory(maskdir, maskstr,
mask_numpre, numpost, maxnum);
sarrayPadToSameSize(sapage, samask, (char *)"");
if ((npages = sarrayGetCount(sapage)) == 0) {
sarrayDestroy(&sapage);
sarrayDestroy(&samask);
return ERROR_INT("no matching pages found", procName, 1);
}
/* Generate the PS file */
pageno = 1;
for (i = 0; i < npages; i++) {
if ((pixs = pixReadIndexed(sapage, i)) == NULL)
continue;
pixm = pixReadIndexed(samask, i);
pixWriteSegmentedPageToPS(pixs, pixm, textscale, imagescale,
threshold, pageno, fileout);
pixDestroy(&pixs);
pixDestroy(&pixm);
pageno++;
}
sarrayDestroy(&sapage);
sarrayDestroy(&samask);
return 0;
}
/*
* pixWriteSegmentedPageToPS()
*
* Input: pixs (all depths; colormap ok)
* pixm (<optional> 1 bpp segmentation mask over image region)
* textscale (scale of text output relative to pixs)
* imagescale (scale of image output relative to pixs)
* threshold (threshold for binarization; typ. 190)
* pageno (page number in set; use 1 for new output file)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This generates the PS string for a mixed text/image page,
* and adds it to an existing file if @pageno > 1.
* The PS output is determined by fitting the result to
* a letter-size (8.5 x 11 inch) page.
* (2) The two images (pixs and pixm) are at the same resolution
* (typically 300 ppi). They are used to generate two compressed
* images, pixb and pixc, that are put directly into the output
* PS file.
* (3) pixb is the text component. In the PostScript world, we think of
* it as a mask through which we paint black. It is produced by
* scaling pixs by @textscale, and thresholding to 1 bpp.
* (4) pixc is the image component, which is that part of pixs under
* the mask pixm. It is scaled from pixs by @imagescale.
* (5) Typical values are textscale = 2.0 and imagescale = 0.5.
* (6) If pixm == NULL, the page has only text. If it is all black,
* the page is all image and has no text.
* (7) This can be used to write a multi-page PS file, by using
* sequential page numbers with the same output file. It can
* also be used to write separate PS files for each page,
* by using different output files with @pageno = 0 or 1.
*/
l_int32
pixWriteSegmentedPageToPS(PIX *pixs,
PIX *pixm,
l_float32 textscale,
l_float32 imagescale,
l_int32 threshold,
l_int32 pageno,
const char *fileout)
{
l_int32 alltext, notext, d, ret;
l_uint32 val;
l_float32 scaleratio;
PIX *pixmi, *pixmis, *pixt, *pixg, *pixsc, *pixb, *pixc;
PROCNAME("pixWriteSegmentedPageToPS");
if (!pixs)
return ERROR_INT("pixs not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (imagescale <= 0.0 || textscale <= 0.0)
return ERROR_INT("relative scales must be > 0.0", procName, 1);
/* Analyze the page. Determine the ratio by which the
* binary text mask is scaled relative to the image part.
* If there is no image region (alltext == TRUE), the
* text mask will be rendered directly to fit the page,
* and scaleratio = 1.0. */
alltext = TRUE;
notext = FALSE;
scaleratio = 1.0;
if (pixm) {
pixZero(pixm, &alltext); /* pixm empty: all text */
if (alltext) {
pixm = NULL; /* treat it as not existing here */
} else {
pixmi = pixInvert(NULL, pixm);
pixZero(pixmi, ¬ext); /* pixm full; no text */
pixDestroy(&pixmi);
scaleratio = textscale / imagescale;
}
}
if (pixGetDepth(pixs) == 1) { /* render tiff g4 */
pixb = pixClone(pixs);
pixc = NULL;
} else {
pixt = pixConvertTo8Or32(pixs, 0, 0); /* this can be a clone of pixs */
/* Get the binary text mask. Note that pixg cannot be a
* clone of pixs, because it may be altered by pixSetMasked(). */
pixb = NULL;
if (notext == FALSE) {
d = pixGetDepth(pixt);
if (d == 8)
pixg = pixCopy(NULL, pixt);
else /* d == 32 */
pixg = pixConvertRGBToLuminance(pixt);
if (pixm) /* clear out the image parts */
pixSetMasked(pixg, pixm, 255);
if (textscale == 1.0)
pixsc = pixClone(pixg);
else if (textscale >= 0.7)
pixsc = pixScaleGrayLI(pixg, textscale, textscale);
else
pixsc = pixScaleAreaMap(pixg, textscale, textscale);
pixb = pixThresholdToBinary(pixsc, threshold);
pixDestroy(&pixg);
pixDestroy(&pixsc);
}
/* Get the scaled image region */
pixc = NULL;
if (pixm) {
if (imagescale == 1.0)
pixsc = pixClone(pixt); /* can possibly be a clone of pixs */
else
pixsc = pixScale(pixt, imagescale, imagescale);
/* If pixm is not full, clear the pixels in pixsc
* corresponding to bg in pixm, where there can be text
* that is written through the mask pixb. Note that
* we could skip this and use pixsc directly in
* pixWriteMixedToPS(); however, clearing these
* non-image regions to a white background will reduce
* the size of pixc (relative to pixsc), and hence
* reduce the size of the PS file that is generated.
* Use a copy so that we don't accidentally alter pixs. */
if (notext == FALSE) {
pixmis = pixScale(pixm, imagescale, imagescale);
pixmi = pixInvert(NULL, pixmis);
val = (d == 8) ? 0xff : 0xffffff00;
pixc = pixCopy(NULL, pixsc);
pixSetMasked(pixc, pixmi, val); /* clear non-image part */
pixDestroy(&pixmis);
pixDestroy(&pixmi);
} else {
pixc = pixClone(pixsc);
}
pixDestroy(&pixsc);
}
pixDestroy(&pixt);
}
/* Generate the PS file. Don't use bounding boxes. */
l_psWriteBoundingBox(FALSE);
ret = pixWriteMixedToPS(pixb, pixc, scaleratio, pageno, fileout);
l_psWriteBoundingBox(TRUE);
pixDestroy(&pixb);
pixDestroy(&pixc);
return ret;
}
/*
* pixWriteMixedToPS()
*
* Input: pixb (<optionall> 1 bpp "mask"; typically for text)
* pixc (<optional> 8 or 32 bpp image regions)
* scale (relative scale factor for rendering pixb
* relative to pixc; typ. 4.0)
* pageno (page number in set; use 1 for new output file)
* fileout (output ps file)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This low level function generates the PS string for a mixed
* text/image page, and adds it to an existing file if
* @pageno > 1.
* (2) The two images (pixb and pixc) are typically generated at the
* resolution that they will be rendered in the PS file.
* (3) pixb is the text component. In the PostScript world, we think of
* it as a mask through which we paint black.
* (4) pixc is the (typically halftone) image component. It is
* white in the rest of the page. To minimize the size of the
* PS file, it should be rendered at a resolution that is at
* least equal to its actual resolution.
* (5) @scale gives the ratio of resolution of pixb to pixc.
* Typical resolutions are: 600 ppi for pixb, 150 ppi for pixc;
* so @scale = 4.0. If one of the images is not defined,
* the value of @scale is ignored.
* (6) We write pixc with DCT compression (jpeg). This is followed
* by painting the text as black through the mask pixb. If
* pixc doesn't exist (alltext), we write the text with the
* PS "image" operator instead of the "imagemask" operator,
* because ghostscript's ps2pdf is flaky when the latter is used.
* (7) The actual output resolution is determined by fitting the
* result to a letter-size (8.5 x 11 inch) page.
*/
l_int32
pixWriteMixedToPS(PIX *pixb,
PIX *pixc,
l_float32 scale,
l_int32 pageno,
const char *fileout)
{
const char tnameb[] = "/tmp/lept/psio_mixed.tif";
const char tnamec[] = "/tmp/lept/psio_mixed.jpg";
const char *op;
l_int32 resb, resc, endpage, maskop, ret;
PROCNAME("pixWriteMixedToPS");
if (!pixb && !pixc)
return ERROR_INT("pixb and pixc both undefined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
/* Compute the resolution that fills a letter-size page. */
if (!pixc) {
resb = getResLetterPage(pixGetWidth(pixb), pixGetHeight(pixb), 0);
} else {
resc = getResLetterPage(pixGetWidth(pixc), pixGetHeight(pixc), 0);
if (pixb)
resb = (l_int32)(scale * resc);
}
/* Write the jpeg image first */
lept_mkdir("lept");
if (pixc) {
pixWrite(tnamec, pixc, IFF_JFIF_JPEG);
endpage = (pixb) ? FALSE : TRUE;
op = (pageno <= 1) ? "w" : "a";
ret = convertJpegToPS(tnamec, fileout, op, 0, 0, resc, 1.0,
pageno, endpage);
if (ret)
return ERROR_INT("jpeg data not written", procName, 1);
}
/* Write the binary data, either directly or, if there is
* a jpeg image on the page, through the mask. */
if (pixb) {
pixWrite(tnameb, pixb, IFF_TIFF_G4);
op = (pageno <= 1 && !pixc) ? "w" : "a";
maskop = (pixc) ? 1 : 0;
ret = convertG4ToPS(tnameb, fileout, op, 0, 0, resb, 1.0,
pageno, maskop, 1);
if (ret)
return ERROR_INT("tiff data not written", procName, 1);
}
return 0;
}
/*-------------------------------------------------------------*
* Convert any image file to PS for embedding *
*-------------------------------------------------------------*/
/*
* convertToPSEmbed()
*
* Input: filein (input image file -- any format)
* fileout (output ps file)
* level (compression: 1 (uncompressed), 2 or 3)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This is a wrapper function that generates a PS file with
* a bounding box, from any input image file.
* (2) Do the best job of compression given the specified level.
* @level=3 does flate compression on anything that is not
* tiffg4 (1 bpp) or jpeg (8 bpp or rgb).
* (3) If @level=2 and the file is not tiffg4 or jpeg, it will
* first be written to file as jpeg with quality = 75.
* This will remove the colormap and cause some degradation
* in the image.
* (4) The bounding box is required when a program such as TeX
* (through epsf) places and rescales the image. It is
* sized for fitting the image to an 8.5 x 11.0 inch page.
*/
l_int32
convertToPSEmbed(const char *filein,
const char *fileout,
l_int32 level)
{
const char nametif[] = "/tmp/junk_convert_ps_embed.tif";
const char namejpg[] = "/tmp/junk_convert_ps_embed.jpg";
l_int32 d, format;
PIX *pix, *pixs;
PROCNAME("convertToPSEmbed");
if (!filein)
return ERROR_INT("filein not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (level != 1 && level != 2 && level != 3) {
L_ERROR("invalid level specified; using level 2\n", procName);
level = 2;
}
if (level == 1) { /* no compression */
pixWritePSEmbed(filein, fileout);
return 0;
}
/* Find the format and write out directly if in jpeg or tiff g4 */
findFileFormat(filein, &format);
if (format == IFF_JFIF_JPEG) {
convertJpegToPSEmbed(filein, fileout);
return 0;
} else if (format == IFF_TIFF_G4) {
convertG4ToPSEmbed(filein, fileout);
return 0;
} else if (format == IFF_UNKNOWN) {
L_ERROR("format of %s not known\n", procName, filein);
return 1;
}
/* If level 3, flate encode. */
if (level == 3) {
convertFlateToPSEmbed(filein, fileout);
return 0;
}
/* OK, it's level 2, so we must convert to jpeg or tiff g4 */
if ((pixs = pixRead(filein)) == NULL)
return ERROR_INT("image not read from file", procName, 1);
d = pixGetDepth(pixs);
if ((d == 2 || d == 4) && !pixGetColormap(pixs))
pix = pixConvertTo8(pixs, 0);
else if (d == 16)
pix = pixConvert16To8(pixs, 1);
else
pix = pixRemoveColormap(pixs, REMOVE_CMAP_BASED_ON_SRC);
d = pixGetDepth(pix);
if (d == 1) {
pixWrite(nametif, pix, IFF_TIFF_G4);
convertG4ToPSEmbed(nametif, fileout);
} else {
pixWrite(namejpg, pix, IFF_JFIF_JPEG);
convertJpegToPSEmbed(namejpg, fileout);
}
pixDestroy(&pix);
pixDestroy(&pixs);
return 0;
}
/*-------------------------------------------------------------*
* Write all images in a pixa out to PS *
*-------------------------------------------------------------*/
/*
* pixaWriteCompressedToPS()
*
* Input: pixa (any set of images)
* fileout (output ps file)
* res (of input image)
* level (compression: 2 or 3)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) This generates a PS file of multiple page images, all
* with bounding boxes.
* (2) It compresses to:
* cmap + level2: jpeg
* cmap + level3: flate
* 1 bpp: tiffg4
* 2 or 4 bpp + level2: jpeg
* 2 or 4 bpp + level3: flate
* 8 bpp: jpeg
* 16 bpp: flate
* 32 bpp: jpeg
* (3) To generate a pdf, use: ps2pdf <infile.ps> <outfile.pdf>
*/
l_int32
pixaWriteCompressedToPS(PIXA *pixa,
const char *fileout,
l_int32 res,
l_int32 level)
{
char *tname, *g4_name, *jpeg_name, *png_name;
l_int32 i, n, firstfile, index, writeout, d;
PIX *pix, *pixt;
PIXCMAP *cmap;
PROCNAME("pixaWriteCompressedToPS");
if (!pixa)
return ERROR_INT("pixa not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (level != 2 && level != 3) {
L_ERROR("only levels 2 and 3 permitted; using level 2\n", procName);
level = 2;
}
n = pixaGetCount(pixa);
firstfile = TRUE;
index = 0;
lept_mkdir("compr");
g4_name = genTempFilename("/tmp/compr", "temp.tif", 0, 0);
jpeg_name = genTempFilename("/tmp/compr", "temp.jpg", 0, 0);
png_name = genTempFilename("/tmp/compr", "temp.png", 0, 0);
for (i = 0; i < n; i++) {
writeout = TRUE;
pix = pixaGetPix(pixa, i, L_CLONE);
d = pixGetDepth(pix);
cmap = pixGetColormap(pix);
if (d == 1) {
tname = g4_name;
pixWrite(tname, pix, IFF_TIFF_G4);
} else if (cmap) {
if (level == 2) {
pixt = pixConvertForPSWrap(pix);
tname = jpeg_name;
pixWrite(tname, pixt, IFF_JFIF_JPEG);
pixDestroy(&pixt);
} else { /* level == 3 */
tname = png_name;
pixWrite(tname, pix, IFF_PNG);
}
} else if (d == 16) {
if (level == 2)
L_WARNING("d = 16; must write out flate\n", procName);
tname = png_name;
pixWrite(tname, pix, IFF_PNG);
} else if (d == 2 || d == 4) {
if (level == 2) {
pixt = pixConvertTo8(pix, 0);
tname = jpeg_name;
pixWrite(tname, pixt, IFF_JFIF_JPEG);
pixDestroy(&pixt);
} else { /* level == 3 */
tname = png_name;
pixWrite(tname, pix, IFF_PNG);
}
} else if (d == 8 || d == 32) {
tname = jpeg_name;
pixWrite(tname, pix, IFF_JFIF_JPEG);
} else { /* shouldn't happen */
L_ERROR("invalid depth: %d\n", procName, d);
writeout = FALSE;
}
pixDestroy(&pix);
if (writeout)
writeImageCompressedToPSFile(tname, fileout, res,
&firstfile, &index);
}
FREE(g4_name);
FREE(jpeg_name);
FREE(png_name);
return 0;
}
/* --------------------------------------------*/
#endif /* USE_PSIO */
/* --------------------------------------------*/