Showing 651 of 651 total issues
Similar blocks of code found in 26 locations. Consider refactoring. Open
public int getPayloadLen(byte[] ipv6Header) {
byte[] payloadlen = BitOperator.parse(ipv6Header, IPv6Header.PAYLOADLEN_START_BIT, IPv6Header.PAYLOADLEN_END_BIT);
int returnVar = ByteOperator.parseBytesint(payloadlen);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public long getAckNo(byte[] tcpHeader) {
byte[] ackno = BitOperator.parse(tcpHeader, TcpHeader.ACKNO_START_BIT, TcpHeader.ACKNO_END_BIT);
long returnVar = ByteOperator.parseByteslong(ackno);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public int getFlowLabel(byte[] ipv6Header) {
byte[] flowlabel = BitOperator.parse(ipv6Header, IPv6Header.FLOWLABEL_START_BIT, IPv6Header.FLOWLABEL_END_BIT);
int returnVar = ByteOperator.parseBytesint(flowlabel);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public short getHopLimit(byte[] ipv6Header) {
byte[] hoplimit = BitOperator.parse(ipv6Header, IPv6Header.HOPLIMIT_START_BIT, IPv6Header.HOPLIMIT_END_BIT);
short returnVar = ByteOperator.parseBytesshort(hoplimit);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public short getTrafficClass(byte[] ipv6Header) {
byte[] trafficclass = BitOperator.parse(ipv6Header, IPv6Header.TRAFFICCLASS_START_BIT, IPv6Header.TRAFFICCLASS_END_BIT);
short returnVar = ByteOperator.parseBytesshort(trafficclass);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public short getFragOffset(byte[] ipv4Header) {
byte[] fragoffset = BitOperator.parse(ipv4Header, IPv4Header.FRAGOFFSET_START_BIT, IPv4Header.FRAGOFFSET_END_BIT);
short returnVar = ByteOperator.parseBytesshort(fragoffset);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public short getType_(byte[] icmpHeader) {
byte[] type_ = BitOperator.parse(icmpHeader, IcmpHeader.TYPE__START_BIT, IcmpHeader.TYPE__END_BIT);
short returnVar = ByteOperator.parseBytesshort(type_);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 26 locations. Consider refactoring. Open
public short getCode(byte[] icmpHeader) {
byte[] code = BitOperator.parse(icmpHeader, IcmpHeader.CODE_START_BIT, IcmpHeader.CODE_END_BIT);
short returnVar = ByteOperator.parseBytesshort(code);
return returnVar;
}- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Method run has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
@Override
public void run() {
while (isRunning) {
if (!isProcessing) {
if (!inputQueue.isEmpty()) {- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
First sentence of Javadoc is missing an ending period. Open
/**- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks thatJavadoc summary sentence does not contain phrases that are not recommended to use.Summaries that contain only the {@inheritDoc} tag are skipped. Check alsoviolate Javadoc that does not contain first sentence.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 124). Open
byte[] dst_addr = BitOperator.parse(ethernetHeader, EthernetHeader.DST_ADDR_START_BIT, EthernetHeader.DST_ADDR_END_BIT);- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Local variable name 'src_addr' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
byte[] src_addr = BitOperator.parse(ethernetHeader, EthernetHeader.SRC_ADDR_START_BIT, EthernetHeader.SRC_ADDR_END_BIT);- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks that local, non-final variable names conform to a specified pattern.A catch parameter is considered to be a local variable.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'in.ac.bits.protocolanalyzer.analyzer.PacketWrapper' import. Should be before 'org.springframework.stereotype.Component'. Open
import in.ac.bits.protocolanalyzer.analyzer.PacketWrapper;- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 103). Open
byte[] flags = BitOperator.parse(ipv4Header, IPv4Header.FLAGS_START_BIT, IPv4Header.FLAGS_END_BIT);- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 109). Open
byte[] srcaddr = BitOperator.parse(ipv4Header, IPv4Header.SRCADDR_START_BIT, IPv4Header.SRCADDR_END_BIT);- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Summary javadoc is missing. Open
/**- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks thatJavadoc summary sentence does not contain phrases that are not recommended to use.Summaries that contain only the {@inheritDoc} tag are skipped. Check alsoviolate Javadoc that does not contain first sentence.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
'package' should be separated from previous line. Open
package in.ac.bits.protocolanalyzer.analyzer;- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for empty line separators before package, all import declarations,fields, constructors, methods, nested classes,static initializers and instance initializers.
Checks for empty line separators before not only statements butimplementation and documentation comments and blocks as well.
ATTENTION: empty line separator is required between token siblings,not after line where token is found.If token does not have same type sibling then empty lineis required at its end (for example for CLASS_DEF it is after '}').Also, trailing comments are skipped.
ATTENTION: violations from multiple empty lines cannot be suppressed via XPath:#8179.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'lombok.Getter' import. Should be before 'org.springframework.stereotype.Component'. Open
import lombok.Getter;- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
First sentence of Javadoc is missing an ending period. Open
/**- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks thatJavadoc summary sentence does not contain phrases that are not recommended to use.Summaries that contain only the {@inheritDoc} tag are skipped. Check alsoviolate Javadoc that does not contain first sentence.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'in.ac.bits.protocolanalyzer.analyzer.Session' Open
import in.ac.bits.protocolanalyzer.analyzer.Session;- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.